Showing 1–40 of 40 results for author: Bateman, J

Demonstration of neutron identification in neutrino interactions in the MicroBooNE liquid argon time projection chamber

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (165 additional authors not shown)

Abstract: A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data const… ▽ More A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE's total dataset. The selection yields a sample with $60\%$ of selected tracks corresponding to neutron-induced secondary protons. △ Less

Submitted 15 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0301

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (164 additional authors not shown)

Abstract: We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstr… ▽ More We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Report number: FERMILAB-PUB-24-0287

Backaction suppression in levitated optomechanics using reflective boundaries

Authors: Rafał Gajewski, James Bateman

Abstract: We show theoretically that the noise due to laser induced backaction acting on a small nanosphere levitated in a standing-wave trap can be considerably reduced by utilising a suitable reflective boundary. We examine the spherical mirror geometry as a case study of this backaction suppression effect, discussing the theoretical and experimental constraints. We study the effects of laser recoil direc… ▽ More We show theoretically that the noise due to laser induced backaction acting on a small nanosphere levitated in a standing-wave trap can be considerably reduced by utilising a suitable reflective boundary. We examine the spherical mirror geometry as a case study of this backaction suppression effect, discussing the theoretical and experimental constraints. We study the effects of laser recoil directly, by analysing optical force fluctuations acting on a dipolar particle trapped at the centre of a spherical mirror. We also compute the corresponding measurement imprecision in an interferometric, shot-noise-limited position measurement, using the formalism of Fisher information flow. Our results show that the standing-wave trapping field is necessary for backaction suppression in three dimensions, and they satisfy the Heisenberg limit of detection. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 9 pages with 5 figures, and 5 page supplementary

First double-differential cross section measurement of neutral-current $π^0$ production in neutrino-argon scattering in the MicroBooNE detector

Authors: MicroBooNE collaboration, P. Abratenko, O. Alterkait, D. Andrade Aldana, L. Arellano, J. Asaadi, A. Ashkenazi, S. Balasubramanian, B. Baller, A. Barnard, G. Barr, D. Barrow, J. Barrow, V. Basque, J. Bateman, O. Benevides Rodrigues, S. Berkman, A. Bhanderi, A. Bhat, M. Bhattacharya, M. Bishai, A. Blake, B. Bogart, T. Bolton, J. Y. Book , et al. (166 additional authors not shown)

Abstract: We report the first double-differential cross section measurement of neutral-current neutral pion (NC$π^0$) production in neutrino-argon scattering, as well as single-differential measurements of the same channel in terms of final states with and without protons. The kinematic variables of interest for these measurements are the $π^0$ momentum and the $π^0$ scattering angle with respect to the neu… ▽ More We report the first double-differential cross section measurement of neutral-current neutral pion (NC$π^0$) production in neutrino-argon scattering, as well as single-differential measurements of the same channel in terms of final states with and without protons. The kinematic variables of interest for these measurements are the $π^0$ momentum and the $π^0$ scattering angle with respect to the neutrino beam. A total of 4971 candidate NC$π^0$ events fully-contained within the MicroBooNE detector are selected using data collected at a mean neutrino energy of $\sim 0.8$ GeV from $6.4\times10^{20}$ protons on target from the Booster Neutrino Beam at the Fermi National Accelerator Laboratory. After extensive data-driven model validation to ensure unbiased unfolding, the Wiener-SVD method is used to extract nominal flux-averaged cross sections. The results are compared to predictions from commonly used neutrino event generators, which tend to overpredict the measured NC$π^0$ cross section, especially in the 0.2-0.5 GeV/c $π^0$ momentum range, at forward scattering angles, and when at least one proton is present in the final state. These measurements show sensitivity to a variety of features that complicate the description of NC$π^0$ production including the form factors describing the elementary neutrino interaction and the final state interactions of the outgoing particles in the residual argon nucleus. This data will help improve the modeling of NC$π^0$ production, which represents a major background in measurements of charge-parity violation in the neutrino sector and in searches for new physics beyond the Standard Model. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Report number: FERMILAB-PUB-24-0125

Bayesian inference for near-field interferometric tests of collapse models

Authors: Shaun Laing, James Bateman

Abstract: We explore the information which proposed matterwave interferometry experiments with large test masses can provide about parameterizable extensions to quantum mechanics, such as have been proposed to explain the apparent quantum to classical transition. Specifically, we consider a matterwave near-field Talbot interferometer and Continuous Spontaneous Localisation (CSL). Using Bayesian inference we… ▽ More We explore the information which proposed matterwave interferometry experiments with large test masses can provide about parameterizable extensions to quantum mechanics, such as have been proposed to explain the apparent quantum to classical transition. Specifically, we consider a matterwave near-field Talbot interferometer and Continuous Spontaneous Localisation (CSL). Using Bayesian inference we compute the effect of decoherence mechanisms including pressure and blackbody radiation, find estimates for the number of measurements required, and provide a procedure for optimal choice of experimental control variables. We show that in a MAQRO like experiment it is possible to reach masses of $\sim10^9\,\text{u}$ and we quantify the bounds which can be placed on CSL. These specific results can be used to inform experimental design and the general approach can be applied to other parameterizable models. △ Less

Submitted 15 July, 2024; v1 submitted 9 October, 2023; originally announced October 2023.

MAQRO -- BPS 2023 Research Campaign Whitepaper

Authors: Rainer Kaltenbaek, Markus Arndt, Markus Aspelmeyer, Peter F. Barker, Angelo Bassi, James Bateman, Alessio Belenchia, Joel Bergé, Sougato Bose, Claus Braxmaier, Bruno Christophe, Garrett D. Cole, Catalina Curceanu, Animesh Datta, Maxime Debiossac, Uroš Delić, Lajos Diósi, Andrew A. Geraci, Stefan Gerlich, Christine Guerlin, Gerald Hechenblaikner, Antoine Heidmann, Sven Herrmann, Klaus Hornberger, Ulrich Johann , et al. (21 additional authors not shown)

Abstract: The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed t… ▽ More The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. These new technologies will open up the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Comments: 9 pages, 2 figures, submitted as a Research Campaign Whitepaper for the BPS2023 Decadal Survey

Semiotically-grounded distant viewing of diagrams: insights from two multimodal corpora

Authors: Tuomo Hiippala, John A. Bateman

Abstract: In this article, we bring together theories of multimodal communication and computational methods to study how primary school science diagrams combine multiple expressive resources. We position our work within the field of digital humanities, and show how annotations informed by multimodality research, which target expressive resources and discourse structure, allow imposing structure on the outpu… ▽ More In this article, we bring together theories of multimodal communication and computational methods to study how primary school science diagrams combine multiple expressive resources. We position our work within the field of digital humanities, and show how annotations informed by multimodality research, which target expressive resources and discourse structure, allow imposing structure on the output of computational methods. We illustrate our approach by analysing two multimodal diagram corpora: the first corpus is intended to support research on automatic diagram processing, whereas the second is oriented towards studying diagrams as a mode of communication. Our results show that multimodally-informed annotations can bring out structural patterns in the diagrams, which also extend across diagrams that deal with different topics. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Comments: 22 pages, 11 figures. Under review at Digital Scholarship in the Humanities

Journal ref: Digital Scholarship in the Humanities, 2021 (ahead of press)

Foundations of the Socio-physical Model of Activities (SOMA) for Autonomous Robotic Agents

Authors: Daniel Beßler, Robert Porzel, Mihai Pomarlan, Abhijit Vyas, Sebastian Höffner, Michael Beetz, Rainer Malaka, John Bateman

Abstract: In this paper, we present foundations of the Socio-physical Model of Activities (SOMA). SOMA represents both the physical as well as the social context of everyday activities. Such tasks seem to be trivial for humans, however, they pose severe problems for artificial agents. For starters, a natural language command requesting something will leave many pieces of information necessary for performing… ▽ More In this paper, we present foundations of the Socio-physical Model of Activities (SOMA). SOMA represents both the physical as well as the social context of everyday activities. Such tasks seem to be trivial for humans, however, they pose severe problems for artificial agents. For starters, a natural language command requesting something will leave many pieces of information necessary for performing the task unspecified. Humans can solve such problems fast as we reduce the search space by recourse to prior knowledge such as a connected collection of plans that describe how certain goals can be achieved at various levels of abstraction. Rather than enumerating fine-grained physical contexts SOMA sets out to include socially constructed knowledge about the functions of actions to achieve a variety of goals or the roles objects can play in a given situation. As the human cognition system is capable of generalizing experiences into abstract knowledge pieces applicable to novel situations, we argue that both physical and social context need be modeled to tackle these challenges in a general manner. This is represented by the link between the physical and social context in SOMA where relationships are established between occurrences and generalizations of them, which has been demonstrated in several use cases that validate SOMA. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Introducing the diagrammatic semiotic mode

Authors: Tuomo Hiippala, John A. Bateman

Abstract: As the use and diversity of diagrams across many disciplines grows, there is an increasing interest in the diagrams research community concerning how such diversity might be documented and explained. In this article, we argue that one way of achieving increased reliability, coverage, and utility for a general classification of diagrams is to draw on recently developed semiotic principles developed… ▽ More As the use and diversity of diagrams across many disciplines grows, there is an increasing interest in the diagrams research community concerning how such diversity might be documented and explained. In this article, we argue that one way of achieving increased reliability, coverage, and utility for a general classification of diagrams is to draw on recently developed semiotic principles developed within the field of multimodality. To this end, we sketch out the internal details of what may tentatively be termed the diagrammatic semiotic mode. This provides a natural account of how diagrammatic representations may integrate natural language, various forms of graphics, diagrammatic elements such as arrows, lines and other expressive resources into coherent organisations, while still respecting the crucial diagrammatic contributions of visual organisation. We illustrate the proposed approach using two recent diagram corpora and show how a multimodal approach supports the empirical analysis of diagrammatic representations, especially in identifying diagrammatic constituents and describing their interrelations in a manner that may be generalised across diagram types and be used to characterise distinct kinds of functionality. △ Less

Submitted 12 June, 2022; v1 submitted 30 January, 2020; originally announced January 2020.

Comments: 16 pages; accepted at Diagrams 2022

AI2D-RST: A multimodal corpus of 1000 primary school science diagrams

Authors: Tuomo Hiippala, Malihe Alikhani, Jonas Haverinen, Timo Kalliokoski, Evanfiya Logacheva, Serafina Orekhova, Aino Tuomainen, Matthew Stone, John A. Bateman

Abstract: This article introduces AI2D-RST, a multimodal corpus of 1000 English-language diagrams that represent topics in primary school natural sciences, such as food webs, life cycles, moon phases and human physiology. The corpus is based on the Allen Institute for Artificial Intelligence Diagrams (AI2D) dataset, a collection of diagrams with crowd-sourced descriptions, which was originally developed to… ▽ More This article introduces AI2D-RST, a multimodal corpus of 1000 English-language diagrams that represent topics in primary school natural sciences, such as food webs, life cycles, moon phases and human physiology. The corpus is based on the Allen Institute for Artificial Intelligence Diagrams (AI2D) dataset, a collection of diagrams with crowd-sourced descriptions, which was originally developed to support research on automatic diagram understanding and visual question answering. Building on the segmentation of diagram layouts in AI2D, the AI2D-RST corpus presents a new multi-layer annotation schema that provides a rich description of their multimodal structure. Annotated by trained experts, the layers describe (1) the grouping of diagram elements into perceptual units, (2) the connections set up by diagrammatic elements such as arrows and lines, and (3) the discourse relations between diagram elements, which are described using Rhetorical Structure Theory (RST). Each annotation layer in AI2D-RST is represented using a graph. The corpus is freely available for research and teaching. △ Less

Submitted 20 March, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Comments: 24 pages; revised version submitted to Language Resources & Evaluation

Journal ref: Language Resources and Evaluation 55(3), 2021, pp. 661-688

A single fast radio burst localized to a massive galaxy at cosmological distance

Authors: K. W. Bannister, A. T. Deller, C. Phillips, J. -P. Macquart, J. X. Prochaska, N. Tejos, S. D. Ryder, E. M. Sadler, R. M. Shannon, S. Simha, C. K. Day, M. McQuinn, F. O. North-Hickey, S. Bhandari, W. R. Arcus, V. N. Bennert, J. Burchett, M. Bouwhuis, R. Dodson, R. D. Ekers, W. Farah, C. Flynn, C. W. James, M. Kerr, E. Lenc , et al. (29 additional authors not shown)

Abstract: Fast Radio Bursts (FRBs) are brief radio emissions from distant astronomical sources. Some are known to repeat, but most are single bursts. Non-repeating FRB observations have had insufficient positional accuracy to localize them to an individual host galaxy. We report the interferometric localization of the single pulse FRB 180924 to a position 4 kpc from the center of a luminous galaxy at redshi… ▽ More Fast Radio Bursts (FRBs) are brief radio emissions from distant astronomical sources. Some are known to repeat, but most are single bursts. Non-repeating FRB observations have had insufficient positional accuracy to localize them to an individual host galaxy. We report the interferometric localization of the single pulse FRB 180924 to a position 4 kpc from the center of a luminous galaxy at redshift 0.3214. The burst has not been observed to repeat. The properties of the burst and its host are markedly different from the only other accurately localized FRB source. The integrated electron column density along the line of sight closely matches models of the intergalactic medium, indicating that some FRBs are clean probes of the baryonic component of the cosmic web. △ Less

Submitted 27 June, 2019; originally announced June 2019.

Comments: Published online in Science 27 June 2019

Spectral analysis and parameter estimation in levitated optomechanics

Authors: Chris Dawson, James Bateman

Abstract: Optical levitation of nanoscale particles has emerged as a platform for precision measurement. Extremely low damping, together with optical interferometric position detection, makes possible exquisite force measurement and promises low-energy tests of fundamental physics. Essential to such measurement is an understanding of the confidence with which parameters can be inferred from spectra estimate… ▽ More Optical levitation of nanoscale particles has emerged as a platform for precision measurement. Extremely low damping, together with optical interferometric position detection, makes possible exquisite force measurement and promises low-energy tests of fundamental physics. Essential to such measurement is an understanding of the confidence with which parameters can be inferred from spectra estimated from the indirect measurement provided by interferometry. We present an apparatus optimized for sensitivity along one motional degree of freedom, a theoretical model of the spectrum, and maximum likelihood estimation. The treatment accounts for the sinusoidal dependence of interferometric signal on particle position, and we use the technique to extract thermodynamic quantities in a regime where simpler treatments are confounded. △ Less

Submitted 23 May, 2019; v1 submitted 4 March, 2019; originally announced March 2019.

Comments: 9 pages, 9 figures

Journal ref: Journal of the Optical Society of America B Vol. 36, Issue 6, pp. 1565-1573 (2019)

MARS-MD: rejection based image domain material decomposition

Authors: C. J. Bateman, D. Knight, B. Brandwacht, J. Mc Mahon, J. Healy, R. Panta, R. Aamir, K. Rajendran, M. Moghiseh, M. Ramyar, D. Rundle, J. Bennett, N. de Ruiter, D. Smithies, S. T. Bell, R. Doesburg, A. Chernoglazov, V. B. H. Mandalika, M. Walsh, M. Shamshad, M. Anjomrouz, A. Atharifard, L. Vanden Broeke, S. Bheesette, T. Kirkbride , et al. (6 additional authors not shown)

Abstract: This paper outlines image domain material decomposition algorithms that have been routinely used in MARS spectral CT systems. These algorithms (known collectively as MARS-MD) are based on a pragmatic heuristic for solving the under-determined problem where there are more materials than energy bins. This heuristic contains three parts: (1) splitting the problem into a number of possible sub-problem… ▽ More This paper outlines image domain material decomposition algorithms that have been routinely used in MARS spectral CT systems. These algorithms (known collectively as MARS-MD) are based on a pragmatic heuristic for solving the under-determined problem where there are more materials than energy bins. This heuristic contains three parts: (1) splitting the problem into a number of possible sub-problems, each containing fewer materials; (2) solving each sub-problem; and (3) applying rejection criteria to eliminate all but one sub-problem's solution. An advantage of this process is that different constraints can be applied to each sub-problem if necessary. In addition, the result of this process is that solutions will be sparse in the material domain, which reduces crossover of signal between material images. Two algorithms based on this process are presented: the Segmentation variant, which uses segmented material classes to define each sub-problem; and the Angular Rejection variant, which defines the rejection criteria using the angle between reconstructed attenuation vectors. △ Less

Submitted 14 February, 2018; originally announced February 2018.

Matterwave interferometric velocimetry of cold Rb atoms

Authors: Max Carey, Mohammad Belal, Matthew Himsworth, James Bateman, Tim Freegarde

Abstract: We consider the matterwave interferometric measurement of atomic velocities, which forms a building block for all matterwave inertial measurements. A theoretical analysis, addressing both the laboratory and atomic frames and accounting for residual Doppler sensitivity in the beamsplitter and recombiner pulses, is followed by an experimental demonstration, with measurements of the velocity distribu… ▽ More We consider the matterwave interferometric measurement of atomic velocities, which forms a building block for all matterwave inertial measurements. A theoretical analysis, addressing both the laboratory and atomic frames and accounting for residual Doppler sensitivity in the beamsplitter and recombiner pulses, is followed by an experimental demonstration, with measurements of the velocity distribution within a 20 $μ$K cloud of rubidium atoms. Our experiments use Raman transitions between the long-lived ground hyperfine states, and allow quadrature measurements that yield the full complex interferometer signal and hence discriminate between positive and negative velocities. The technique is most suitable for measurement of colder samples. △ Less

Submitted 3 November, 2017; v1 submitted 11 September, 2017; originally announced September 2017.

Comments: 16 pages, 6 figures

The Australian Square Kilometre Array Pathfinder: Performance of the Boolardy Engineering Test Array

Authors: D. McConnell, J. R. Allison, K. Bannister, M. E. Bell, H. E. Bignall, A. P. Chippendale, P. G. Edwards, L. Harvey-Smith, S. Hegarty, I. Heywood, A. W. Hotan, B. T. Indermuehle, E. Lenc, J. Marvil, A. Popping, W. Raja, J. E. Reynolds, R. J. Sault, P. Serra, M. A. Voronkov, M. Whiting, S. W. Amy, P. Axtens, L. Ball, T. J. Bateman , et al. (49 additional authors not shown)

Abstract: We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, a… ▽ More We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, and the adaptations that have been made to the traditional calibration and imaging procedures in order to allow BETA to function as a multi-beam aperture synthesis telescope. We describe the commissioning of the instrument and present details of BETA's performance: sensitivity, beam characteristics, polarimetric properties and image quality. We summarise the astronomical science that it has produced and draw lessons from operating BETA that will be relevant to the commissioning and operation of the final ASKAP telescope. △ Less

Submitted 2 August, 2016; originally announced August 2016.

Comments: Accepted for publication in PASA

A dynamic magneto-optical trap for atom chips

Authors: Jo Rushton, Ritayan Roy, James Bateman, Matt Himsworth

Abstract: We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This "switching-MOT" relies on the synchronized pulsing… ▽ More We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This "switching-MOT" relies on the synchronized pulsing of optical and magnetic fields at audio frequencies. The trap's beam geometry is obtained using a planar mirror surface, and does not require a patterned substrate or bulky optics inside the vacuum chamber. Central to the design is a novel magnetic field geometry that requires no external quadrupole or bias coils which leads toward a very compact system. We have implemented the trap for $^{85}$Rb and shown that it is capable of capturing 2 million atoms and directly cooling below the Doppler temperature. △ Less

Submitted 28 July, 2016; originally announced July 2016.

Comments: 15 pages, 7 figures

Journal ref: New J. Phys. 18 113020 (2016)

Experimental Realisation of a Thermal Squeezed State of Levitated Optomechanics

Authors: Muddassar Rashid, Tommaso Tufarelli, James Bateman, Jamie Vovrosh, David Hempston, M. S. Kim, Hendrik Ulbricht

Abstract: We experimentally squeeze the thermal motional state of an optically levitated nanosphere, by fast switching between two trapping frequencies. The measured phase space distribution of our particle shows the typical shape of a squeezed thermal state, from which we infer up to 2.7dB of squeezing along one motional direction. The experiment features a large number of thermal excitations, therefore re… ▽ More We experimentally squeeze the thermal motional state of an optically levitated nanosphere, by fast switching between two trapping frequencies. The measured phase space distribution of our particle shows the typical shape of a squeezed thermal state, from which we infer up to 2.7dB of squeezing along one motional direction. The experiment features a large number of thermal excitations, therefore remaining in the classical regime. Nevertheless, we argue that the manipulation scheme described here could be used to achieve squeezing below the zero-point level, if preceded by ground state cooling of the levitated mechanical oscillator. Additionally, a higher degree of squeezing could in principle be achieved by repeating the frequency-switching protocol multiple times. △ Less

Submitted 17 November, 2016; v1 submitted 19 July, 2016; originally announced July 2016.

Comments: 6 pages, 3 figures, updated version, Accepted for publication at PRL

Journal ref: Phys. Rev. Lett. 117, 273601 (2016)

The Quantum Socket: Three-Dimensional Wiring for Extensible Quantum Computing

Authors: J. H. Béjanin, T. G. McConkey, J. R. Rinehart, C. T. Earnest, C. R. H. McRae, D. Shiri, J. D. Bateman, Y. Rohanizadegan, B. Penava, P. Breul, S. Royak, M. Zapatka, A. G. Fowler, M. Mariantoni

Abstract: Quantum computing architectures are on the verge of scalability, a key requirement for the implementation of a universal quantum computer. The next stage in this quest is the realization of quantum error correction codes, which will mitigate the impact of faulty quantum information on a quantum computer. Architectures with ten or more quantum bits (qubits) have been realized using trapped ions and… ▽ More Quantum computing architectures are on the verge of scalability, a key requirement for the implementation of a universal quantum computer. The next stage in this quest is the realization of quantum error correction codes, which will mitigate the impact of faulty quantum information on a quantum computer. Architectures with ten or more quantum bits (qubits) have been realized using trapped ions and superconducting circuits. While these implementations are potentially scalable, true scalability will require systems engineering to combine quantum and classical hardware. One technology demanding imminent efforts is the realization of a suitable wiring method for the control and measurement of a large number of qubits. In this work, we introduce an interconnect solution for solid-state qubits: The quantum socket. The quantum socket fully exploits the third dimension to connect classical electronics to qubits with higher density and better performance than two-dimensional methods based on wire bonding. The quantum socket is based on spring-mounted micro wires the three-dimensional wires that push directly on a micro-fabricated chip, making electrical contact. A small wire cross section (~1 mmm), nearly non-magnetic components, and functionality at low temperatures make the quantum socket ideal to operate solid-state qubits. The wires have a coaxial geometry and operate over a frequency range from DC to 8 GHz, with a contact resistance of ~150 mohm, an impedance mismatch of ~10 ohm, and minimal crosstalk. As a proof of principle, we fabricated and used a quantum socket to measure superconducting resonators at a temperature of ~10 mK. △ Less

Submitted 31 May, 2016; originally announced June 2016.

Comments: Main: 31 pages, 19 figs., 8 tables, 8 apps.; suppl.: 4 pages, 5 figs. (HiRes figs. and movies on request). Submitted

Journal ref: Phys. Rev. Applied 6, 044010 (2016)

Parametric Feedback Cooling of Levitated Optomechanics in a Parabolic Mirror Trap

Authors: Jamie Vovrosh, Muddassar Rashid, David Hempston, James Bateman, Mauro Paternostro, Hendrik Ulbricht

Abstract: We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for a… ▽ More We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional degrees of freedom from room temperature to a few mK. A single laser at 1550nm, and a single photodiode, are used for trapping, position detection, and cooling for all three dimensions. Particles with diameters from 26nm to 160nm are trapped without feedback to 10$^{-5}$mbar and with feedback engaged the pressure is reduced to 10$^{-6}$mbar. Modifications to the harmonic motion in the presence of noise and feedback are studied, and an experimental mechanical quality factor $>4\times 10^7$ is estimated. △ Less

Submitted 23 January, 2017; v1 submitted 9 March, 2016; originally announced March 2016.

Comments: Updated version of the paper, Comments welcome!

Free Nano-Object Ramsey Interferometry for Large Quantum Superpositions

Authors: C. Wan, M. Scala, G. W. Morley, ATM. A. Rahman, H. Ulbricht, J. Bateman, P. F. Baker, S. Bose, M. S. Kim

Abstract: We propose an interferometric scheme based on an untrapped nano-object subjected to gravity. The motion of the center of mass (c.m.) of the free object is coupled to its internal spin system magnetically, and a free flight scheme is developed based on coherent spin control. The wavepacket of the test object, under a spin-dependent force, may then be delocalized to a macroscopic scale. A gravity in… ▽ More We propose an interferometric scheme based on an untrapped nano-object subjected to gravity. The motion of the center of mass (c.m.) of the free object is coupled to its internal spin system magnetically, and a free flight scheme is developed based on coherent spin control. The wavepacket of the test object, under a spin-dependent force, may then be delocalized to a macroscopic scale. A gravity induced dynamical phase (accrued solely on the spin state, and measured through a Ramsey scheme) is used to reveal the above spatially delocalised superposition of the spin-nano-object composite system that arises during our scheme. We find a remarkable immunity to the motional noise in the c.m. (initially in a thermal state with moderate cooling), and also a dynamical decoupling nature of the scheme itself. Together they secure a high visibility of the resulting Ramsey fringes. The mass independence of our scheme makes it viable for a nano-object selected from an ensemble with a high mass variability. Given these advantages, a quantum superposition with $100$ nm spatial separation for a massive object of $10^9$ amu is achievable experimentally, providing a route to test postulated modifications of quantum theory such as continuous spontaneous localisation. △ Less

Submitted 11 July, 2016; v1 submitted 9 November, 2015; originally announced November 2015.

Comments: 7 pages, 3 figures

Journal ref: Phys. Rev. Lett. 117, 143003 (2016)

Optomechanical test of the Schrödinger-Newton equation

Authors: André Großardt, James Bateman, Hendrik Ulbricht, Angelo Bassi

Abstract: The Schrödinger-Newton equation has been proposed as an experimentally testable alternative to quantum gravity, accessible at low energies. It contains self-gravitational terms, which slightly modify the quantum dynamics. Here we show that it distorts the spectrum of a harmonic system. Based on this effect, we propose an optomechanical experiment with a trapped microdisc to test the Schrödinger-Ne… ▽ More The Schrödinger-Newton equation has been proposed as an experimentally testable alternative to quantum gravity, accessible at low energies. It contains self-gravitational terms, which slightly modify the quantum dynamics. Here we show that it distorts the spectrum of a harmonic system. Based on this effect, we propose an optomechanical experiment with a trapped microdisc to test the Schrödinger-Newton equation, and we show that it can be realized with existing technology. △ Less

Submitted 6 October, 2015; originally announced October 2015.

Comments: 13 pages, 4 figures, 1 table, 1 page of supplemental material

Journal ref: Phys. Rev. D 93, 096003 (2016)

Effects of Newtonian gravitational self-interaction in harmonically trapped quantum systems

Authors: André Großardt, James Bateman, Hendrik Ulbricht, Angelo Bassi

Abstract: The Schrödinger-Newton equation has gained attention in the recent past as a nonlinear modification of the Schrödinger equation due to a gravitational self-interaction. Such a modification is expected from a fundamentally semi-classical theory of gravity, and can therefore be considered a test case for the necessity of the quantisation of the gravitational field. Here we provide a thorough study o… ▽ More The Schrödinger-Newton equation has gained attention in the recent past as a nonlinear modification of the Schrödinger equation due to a gravitational self-interaction. Such a modification is expected from a fundamentally semi-classical theory of gravity, and can therefore be considered a test case for the necessity of the quantisation of the gravitational field. Here we provide a thorough study of the effects of the Schrödinger-Newton equation for a micron-sized sphere trapped in a harmonic oscillator potential. We discuss both the effect on the energy eigenstates and the dynamical behaviour of squeezed states, covering the experimentally relevant parameter regimes. △ Less

Submitted 5 October, 2015; originally announced October 2015.

Comments: 22 pages, 14 figures

Journal ref: Scientific Reports 6, 30840 (2016)

The Hidden K-edge Signal in K-edge Imaging

Authors: Christopher J. Bateman, Kishore Rajendran, Niels J. A. de Ruiter, Anthony P. Butler, Philip H. Butler, Peter F. Renaud

Abstract: K-edge imaging is commonly used for viewing contrast pharmaceuticals in a variety of multi-energy x-ray imaging techniques, ranging from dual-energy and spectral computed tomography to fluoroscopy. When looking for the K-edge signal of a specific contrast, by taking measurements either side of the K-edge, it is found that the K-edge is not always observable for low concentrations. We have also obs… ▽ More K-edge imaging is commonly used for viewing contrast pharmaceuticals in a variety of multi-energy x-ray imaging techniques, ranging from dual-energy and spectral computed tomography to fluoroscopy. When looking for the K-edge signal of a specific contrast, by taking measurements either side of the K-edge, it is found that the K-edge is not always observable for low concentrations. We have also observed that the ability to see the K-edge is unit dependent - a K-edge that is not observable in computed tomography (CT) reconstructed linear attenuation units can often be made visible by converting to Hounsfield units. This paper presents an investigation of this K-edge hiding phenomenon. We conclude that if a multi-energy x-ray measurement of any K-edge material contains a signal of any other material, then there will be a positive concentration of that K-edge material below which its K-edge cannot be observed without extracting the K-edge signal through means of basis decomposition. Mathematical descriptions of this limiting minimum concentration is provided in three cases - multi-energy radiographic projection images; and reconstructed multi-energy CT images for both linear attenuation and Hounsfield units. Two important properties of this limiting concentration are provided: the minimum concentration for Hounsfield units is always strictly less than the minimum concentration for linear attenuation; and the minimum concentration for radiographic projections will typically be much larger than the minimum concentration for reconstructed linear attenuation. Finally experimental observation of this phenomenon is presented using data collected by the MARS spectral CT scanner equipped with a CdTe Medipix-3RX camera operating in charge-summing mode, where it is also shown that the K-edge can be recovered through basis decomposition. △ Less

Submitted 13 June, 2015; originally announced June 2015.

Comments: Keywords: computed tomography, spectral, multi-energy, dual-energy, K-edge imaging, material decomposition, Medipix

Macroscopic quantum resonators (MAQRO): 2015 Update

Authors: Rainer Kaltenbaek, Markus Arndt, Markus Aspelmeyer, Peter F. Barker, Angelo Bassi, James Bateman, Kai Bongs, Sougato Bose, Claus Braxmaier, Časlav Brukner, Bruno Christophe, Michael Chwalla, Pierre-François Cohadon, Adrian M. Cruise, Catalina Curceanu, Kishan Dholakia, Klaus Döringshoff, Wolfgang Ertmer, Jan Gieseler, Norman Gürlebeck, Gerald Hechenblaikner, Antoine Heidmann, Sven Herrmann, Sabine Hossenfelder, Ulrich Johann , et al. (27 additional authors not shown)

Abstract: Do the laws of quantum physics still hold for macroscopic objects - this is at the heart of Schrödinger's cat paradox - or do gravitation or yet unknown effects set a limit for massive particles? What is the fundamental relation between quantum physics and gravity? Ground-based experiments addressing these questions may soon face limitations due to limited free-fall times and the quality of vacuum… ▽ More Do the laws of quantum physics still hold for macroscopic objects - this is at the heart of Schrödinger's cat paradox - or do gravitation or yet unknown effects set a limit for massive particles? What is the fundamental relation between quantum physics and gravity? Ground-based experiments addressing these questions may soon face limitations due to limited free-fall times and the quality of vacuum and microgravity. The proposed mission MAQRO may overcome these limitations and allow addressing those fundamental questions. MAQRO harnesses recent developments in quantum optomechanics, high-mass matter-wave interferometry as well as state-of-the-art space technology to push macroscopic quantum experiments towards their ultimate performance limits and to open new horizons for applying quantum technology in space. The main scientific goal of MAQRO is to probe the vastly unexplored "quantum-classical" transition for increasingly massive objects, testing the predictions of quantum theory for truly macroscopic objects in a size and mass regime unachievable in ground-based experiments. The hardware for the mission will largely be based on available space technology. Here, we present the MAQRO proposal submitted in response to the (M4) Cosmic Vision call of the European Space Agency for a medium-size mission opportunity with a possible launch in 2025. △ Less

Submitted 9 March, 2015; originally announced March 2015.

Comments: 38 pages, 10 tables, 23 figures

Journal ref: EPJ Quantum Technology 3, 5 (2016)

Interferometric laser cooling of atomic rubidium

Authors: Alexander Dunning, Rachel Gregory, James Bateman, Matthew Himsworth, Tim Freegarde

Abstract: We report the 1-D cooling of $^{85}$Rb atoms using a velocity-dependent optical force based upon Ramsey matter-wave interferometry. Using stimulated Raman transitions between ground hyperfine states, 12 cycles of the interferometer sequence cool a freely-moving atom cloud from $21~μ$K to $3~μ$K. This pulsed analog of continuous-wave Doppler cooling is effective at temperatures down to the recoil l… ▽ More We report the 1-D cooling of $^{85}$Rb atoms using a velocity-dependent optical force based upon Ramsey matter-wave interferometry. Using stimulated Raman transitions between ground hyperfine states, 12 cycles of the interferometer sequence cool a freely-moving atom cloud from $21~μ$K to $3~μ$K. This pulsed analog of continuous-wave Doppler cooling is effective at temperatures down to the recoil limit; with augmentation pulses to increase the interferometer area, it should cool more quickly than conventional methods, and be more suitable for species that lack a closed radiative transition. △ Less

Submitted 22 April, 2015; v1 submitted 28 August, 2014; originally announced August 2014.

Journal ref: Phys. Rev. Lett. 115, 073004 (2015)

Composite pulses for interferometry in a thermal cold atom cloud

Authors: Alexander Dunning, Rachel Gregory, James Bateman, Nathan Cooper, Matthew Himsworth, Jonathan A. Jones, Tim Freegarde

Abstract: Atom interferometric sensors and quantum information processors must maintain coherence while the evolving quantum wavefunction is split, transformed and recombined, but suffer from experimental inhomogeneities and uncertainties in the speeds and paths of these operations. Several error-correction techniques have been proposed to isolate the variable of interest. Here we apply composite pulse meth… ▽ More Atom interferometric sensors and quantum information processors must maintain coherence while the evolving quantum wavefunction is split, transformed and recombined, but suffer from experimental inhomogeneities and uncertainties in the speeds and paths of these operations. Several error-correction techniques have been proposed to isolate the variable of interest. Here we apply composite pulse methods to velocity-sensitive Raman state manipulation in a freely-expanding thermal atom cloud. We compare several established pulse sequences, and follow the state evolution within them. The agreement between measurements and simple predictions shows the underlying coherence of the atom ensemble, and the inversion infidelity in an 80 micro-Kelvin atom cloud is halved. Composite pulse techniques, especially if tailored for atom interferometric applications, should allow greater interferometer areas, larger atomic samples and longer interaction times, and hence improve the sensitivity of quantum technologies from inertial sensing and clocks to quantum information processors and tests of fundamental physics. △ Less

Submitted 23 January, 2015; v1 submitted 11 June, 2014; originally announced June 2014.

Journal ref: Phys. Rev. A, 90 (2014) 033608

On the Existence of Low-Mass Dark Matter and its Direct Detection

Authors: James Bateman, Ian McHardy, Alexander Merle, Tim R. Morris, Hendrik Ulbricht

Abstract: Dark Matter (DM) is an elusive form of matter which has been postulated to explain astronomical observations through its gravitational effects on stars and galaxies, gravitational lensing of light around these, and through its imprint on the Cosmic Microwave Background (CMB). This indirect evidence implies that DM accounts for as much as 84.5% of all matter in our Universe, yet it has so far evade… ▽ More Dark Matter (DM) is an elusive form of matter which has been postulated to explain astronomical observations through its gravitational effects on stars and galaxies, gravitational lensing of light around these, and through its imprint on the Cosmic Microwave Background (CMB). This indirect evidence implies that DM accounts for as much as 84.5% of all matter in our Universe, yet it has so far evaded all attempts at direct detection, leaving such confirmation and the consequent discovery of its nature as one of the biggest challenges in modern physics. Here we present a novel form of low-mass DM $χ$ that would have been missed by all experiments so far. While its large interaction strength might at first seem unlikely, neither constraints from particle physics nor cosmological/astronomical observations are sufficient to rule out this type of DM, and it motivates our proposal for direct detection by optomechanics technology which should soon be within reach, namely, through the precise position measurement of a levitated mesoscopic particle which will be perturbed by elastic collisions with $χ$ particles. We show that a recently proposed nanoparticle matter-wave interferometer, originally conceived for tests of the quantum superposition principle, is sensitive to these collisions, too. △ Less

Submitted 21 May, 2014; originally announced May 2014.

Comments: 25 pages, 7 figures

Scalable Spatial Super-Resolution using Entangled Photons

Authors: Lee A. Rozema, James D. Bateman, Dylan H. Mahler, Ryo Okamoto, Amir Feizpour, Alex Hayat, Aephraim M. Steinberg

Abstract: N00N states -- maximally path-entangled states of N photons -- exhibit spatial interference patterns sharper than any classical interference pattern. This is known as super-resolution. However, even with perfectly efficient number-resolving detectors, the detection efficiency of all previously demonstrated methods to measure such interference decreases exponentially with the number of photons in t… ▽ More N00N states -- maximally path-entangled states of N photons -- exhibit spatial interference patterns sharper than any classical interference pattern. This is known as super-resolution. However, even with perfectly efficient number-resolving detectors, the detection efficiency of all previously demonstrated methods to measure such interference decreases exponentially with the number of photons in the N00N state, often leading to the conclusion that N00N states are unsuitable for spatial measurements. Here, we create spatial super-resolution fringes with two-, three-, and four-photon N00N states, and demonstrate a scalable implementation of the so-called ``optical centroid measurement'' which provides an in-principle perfect detection efficiency. Moreover, we compare the N00N-state interference to the corresponding classical super-resolution interference. Although both provide the same increase in spatial frequency, the visibility of the classical fringes decreases exponentially with the number of detected photons, while the visibility of our experimentally measured N00N-state super-resolution fringes remains approximately constant with N. Our implementation of the optical centroid measurement is a scalable method to measure high photon-number quantum interference, an essential step forward for quantum-enhanced measurements, overcoming what was believed to be a fundamental challenge to quantum metrology. △ Less

Submitted 6 December, 2013; originally announced December 2013.

Journal ref: Phys. Rev. Lett. 112, 223602 (2014)

Near-field interferometry of a free-falling nanoparticle from a point-like source

Authors: James Bateman, Stefan Nimmrichter, Klaus Hornberger, Hendrik Ulbricht

Abstract: Matter-wave interferometry performed with massive objects elucidates their wave nature and thus tests the quantum superposition principle at large scales. Whereas standard quantum theory places no limit on particle size, alternative, yet untested theories---conceived to explain the apparent quantum to classical transition---forbid macroscopic superpositions. Here we propose an interferometer with… ▽ More Matter-wave interferometry performed with massive objects elucidates their wave nature and thus tests the quantum superposition principle at large scales. Whereas standard quantum theory places no limit on particle size, alternative, yet untested theories---conceived to explain the apparent quantum to classical transition---forbid macroscopic superpositions. Here we propose an interferometer with a levitated, optically cooled, and then free-falling silicon nanoparticle in the mass range of one million atomic mass units, delocalized over more than 150 nm. The scheme employs the near-field Talbot effect with a single standing-wave laser pulse as a phase grating. Our analysis, which accounts for all relevant sources of decoherence, indicates that this is a viable route towards macroscopic high-mass superpositions using available technology. △ Less

Submitted 26 November, 2014; v1 submitted 2 December, 2013; originally announced December 2013.

Comments: Main: 4 pages, 3 figs; Supplementary: 12 pages, 5 figs

Journal ref: Nature Communications 5:4788 (2014)

Reducing beam hardening effects and metal artefacts using Medipix3RX: With applications from biomaterial science

Authors: K. Rajendran, M. F. Walsh, N. J. A. de Ruiter, A. I. Chernoglazov, R. K. Panta, A. P. H. Butler, P. H. Butler, S. T. Bell, N. G. Anderson, T. B. F. Woodfield, S. J. Tredinnick, J. L. Healy, C. J. Bateman, R. Aamir, R. M. N. Doesburg, P. F. Renaud, S. P. Gieseg, D. J. Smithies, J. L. Mohr, V. B. H. Mandalika, A. M. T. Opie, N. J. Cook, J. P. Ronaldson, S. J. Nik, A. Atharifard , et al. (6 additional authors not shown)

Abstract: This paper discusses methods for reducing beam hardening effects using spectral data for biomaterial applications. A small-animal spectral scanner operating in the diagnostic energy range was used. We investigate the use of photon-processing features of the Medipix3RX ASIC in reducing beam hardening and associated artefacts. A fully operational charge summing mode was used during the imaging routi… ▽ More This paper discusses methods for reducing beam hardening effects using spectral data for biomaterial applications. A small-animal spectral scanner operating in the diagnostic energy range was used. We investigate the use of photon-processing features of the Medipix3RX ASIC in reducing beam hardening and associated artefacts. A fully operational charge summing mode was used during the imaging routine. We present spectral data collected for metal alloy samples, its analysis using algebraic 3D reconstruction software and volume visualisation using a custom volume rendering software. Narrow high energy acquisition using the photon-processing detector revealed substantial reduction in beam hardening effects and metal artefacts. △ Less

Submitted 20 November, 2013; originally announced November 2013.

MARS spectral molecular imaging of lamb tissue: data collection and image analysis

Authors: R Aamir, A Chernoglazov, C J Bateman, A P H Butler, P H Butler, N G Anderson, S T Bell, R K Panta, J L Healy, J L Mohr, K Rajendran, M F Walsh, N de Ruiter, S P Gieseg, T Woodfield, P F Renaud, L Brooke, S Abdul-Majid, M Clyne, R Glendenning, P J Bones, M Billinghurst, C Bartneck, H Mandalika, R Grasset , et al. (13 additional authors not shown)

Abstract: Spectral molecular imaging is a new imaging technique able to discriminate and quantify different components of tissue simultaneously at high spatial and high energy resolution. Our MARS scanner is an x-ray based small animal CT system designed to be used in the diagnostic energy range (20 to 140 keV). In this paper, we demonstrate the use of the MARS scanner, equipped with the Medipix3RX spectros… ▽ More Spectral molecular imaging is a new imaging technique able to discriminate and quantify different components of tissue simultaneously at high spatial and high energy resolution. Our MARS scanner is an x-ray based small animal CT system designed to be used in the diagnostic energy range (20 to 140 keV). In this paper, we demonstrate the use of the MARS scanner, equipped with the Medipix3RX spectroscopic photon-processing detector, to discriminate fat, calcium, and water in tissue. We present data collected from a sample of lamb meat including bone as an illustrative example of human tissue imaging. The data is analyzed using our 3D Algebraic Reconstruction Algorithm (MARS-ART) and by material decomposition based on a constrained linear least squares algorithm. The results presented here clearly show the quantification of lipid-like, water-like and bone-like components of tissue. However, it is also clear to us that better algorithms could extract more information of clinical interest from our data. Because we are one of the first to present data from multi-energy photon-processing small animal CT systems, we make the raw, partial and fully processed data available with the intention that others can analyze it using their familiar routines. The raw, partially processed and fully processed data of lamb tissue along with the phantom calibration data can be found at [http://hdl.handle.net/10092/8531]. △ Less

Submitted 23 January, 2014; v1 submitted 18 November, 2013; originally announced November 2013.

Comments: 11 pages, 6 figs

Stabilized fiber-optic Mach-Zehnder interferometer for carrier-frequency rejection

Authors: Nathan Cooper, Jonathan Woods, James Bateman, Alexander Dunning, Tim Freegarde

Abstract: We have demonstrated stabilization of a fiber-optic Mach-Zehnder interferometer, with a centimeter-scale path difference, to the transmission minimum for the carrier wave of a frequency-modulated laser beam. A time-averaged extinction of 32 dB, limited by the bandwidth of the feedback, was maintained over several hours. The interferometer was used to remove the carrier wave from a 780 nm laser bea… ▽ More We have demonstrated stabilization of a fiber-optic Mach-Zehnder interferometer, with a centimeter-scale path difference, to the transmission minimum for the carrier wave of a frequency-modulated laser beam. A time-averaged extinction of 32 dB, limited by the bandwidth of the feedback, was maintained over several hours. The interferometer was used to remove the carrier wave from a 780 nm laser beam that had been phase modulated at 2.7 GHz. △ Less

Submitted 11 September, 2013; originally announced September 2013.

Comments: \c{opyright} 2013 Optical Society of America. 5 pages, 5 figures

Journal ref: Applied Optics, Vol. 52, Issue 23, pp. 5713-5717 (2013)

Actively stabilized wavelength-insensitive carrier elimination from an electro-optically modulated laser beam

Authors: Nathan Cooper, James Bateman, Alexander Dunning, Tim Freegarde

Abstract: We demonstrate a simple and robust technique for removal of the carrier wave from a phase-modulated laser beam, using a non-interferometric method that is insensitive to the modulation frequency and instead exploits the polarization-dependence of electro-optic modulation. An actively stabilized system using feedback via a liquid crystal cell yields long-term carrier suppression in excess of 28 dB… ▽ More We demonstrate a simple and robust technique for removal of the carrier wave from a phase-modulated laser beam, using a non-interferometric method that is insensitive to the modulation frequency and instead exploits the polarization-dependence of electro-optic modulation. An actively stabilized system using feedback via a liquid crystal cell yields long-term carrier suppression in excess of 28 dB at the expense of a 6.5 dB reduction in sideband power. △ Less

Submitted 16 March, 2012; originally announced March 2012.

Comments: 9 pages, 5 figures

Journal ref: J. Opt. Soc. Am. B, Vol. 29, pp. 646-649 (2012)

Hänsch--Couillaud locking of Mach--Zehnder interferometer for carrier removal from a phase-modulated optical spectrum

Authors: J. E. Bateman, R. L. D. Murray, M. Himsworth, H. Ohadi, A. Xuereb, T. Freegarde

Abstract: We describe and analyse the operation and stabilization of a Mach--Zehnder interferometer, which separates the carrier and the first-order sidebands of a phase-modulated laser field, and which is locked using the Hänsch--Couillaud method. In addition to the necessary attenuation, our interferometer introduces, via total internal reflection, a significant polarization-dependent phase delay. We empl… ▽ More We describe and analyse the operation and stabilization of a Mach--Zehnder interferometer, which separates the carrier and the first-order sidebands of a phase-modulated laser field, and which is locked using the Hänsch--Couillaud method. In addition to the necessary attenuation, our interferometer introduces, via total internal reflection, a significant polarization-dependent phase delay. We employ a general treatment to describe an interferometer with an object which affects the field along one path, and we examine how this phase delay affects the error signal. We discuss the requirements necessary to ensure the lock point remains unchanged when phase modulation is introduced, and we demonstrate and characterize this locking experimentally. Finally, we suggest an extension to this locking strategy using heterodyne detection. △ Less

Submitted 11 June, 2010; v1 submitted 9 November, 2009; originally announced November 2009.

Comments: 4 pages, 5 figures

Journal ref: J.Opt.Soc.Am.B27:1530,2010

Stimulated Raman transitions via multiple atomic levels

Authors: James Bateman, André Xuereb, Tim Freegarde

Abstract: We consider the stimulated Raman transition between two long-lived states via multiple intermediate states, such as between hyperfine ground states in the alkali-metal atoms. We present a concise treatment of the general, multilevel, off-resonant case, and we show how the lightshift emerges naturally in this approach. We illustrate our results by application to alkali-metal atoms and we make spec… ▽ More We consider the stimulated Raman transition between two long-lived states via multiple intermediate states, such as between hyperfine ground states in the alkali-metal atoms. We present a concise treatment of the general, multilevel, off-resonant case, and we show how the lightshift emerges naturally in this approach. We illustrate our results by application to alkali-metal atoms and we make specific reference to cesium. We comment on some artifacts, due solely to the geometrical overlap of states, which are relevant to existing experiments. △ Less

Submitted 12 April, 2010; v1 submitted 17 August, 2009; originally announced August 2009.

Comments: 8 pages, 2 figure

Journal ref: Phys. Rev. A 81, 043808 (2010)

Mirror-mediated cooling: a paradigm for particle cooling via the retarded dipole force

Authors: Tim Freegarde, James Bateman, André Xuereb, Peter Horak

Abstract: Cooling forces result from the retarded dipole interaction between an illuminated particle and its reflection. For a one-dimensional example, we find cooling times of milliseconds and limiting temperatures in the millikelvin range. The force, which may be considered the prototype for cavity-mediated cooling, may be enhanced by plasmon and geometric resonances at the mirror. Cooling forces result from the retarded dipole interaction between an illuminated particle and its reflection. For a one-dimensional example, we find cooling times of milliseconds and limiting temperatures in the millikelvin range. The force, which may be considered the prototype for cavity-mediated cooling, may be enhanced by plasmon and geometric resonances at the mirror. △ Less

Submitted 1 June, 2012; v1 submitted 20 April, 2009; originally announced April 2009.

Comments: 25 pages, 8 figures

Journal ref: Annual Review of Cold Atoms and Molecules 1, 353 (2013)

Application-driven automatic subgrammar extraction

Authors: Renate Henschel, John A. Bateman

Abstract: The space and run-time requirements of broad coverage grammars appear for many applications unreasonably large in relation to the relative simplicity of the task at hand. On the other hand, handcrafted development of application-dependent grammars is in danger of duplicating work which is then difficult to re-use in other contexts of application. To overcome this problem, we present in this pape… ▽ More The space and run-time requirements of broad coverage grammars appear for many applications unreasonably large in relation to the relative simplicity of the task at hand. On the other hand, handcrafted development of application-dependent grammars is in danger of duplicating work which is then difficult to re-use in other contexts of application. To overcome this problem, we present in this paper a procedure for the automatic extraction of application-tuned consistent subgrammars from proved large-scale generation grammars. The procedure has been implemented for large-scale systemic grammars and builds on the formal equivalence between systemic grammars and typed unification based grammars. Its evaluation for the generation of encyclopedia entries is described, and directions of future development, applicability, and extensions are discussed. △ Less

Submitted 19 November, 1997; originally announced November 1997.

Comments: 8 pages, uses: aclap.sty, epic.sty, put-inserts Paper presented at the ACL/EACL'97 Madrid Workshop on Computational Environments for Grammar Development and Linguistic Engineering

Some apparently disjoint aims and requirements for grammar development environments: the case of natural language generation

Authors: John A. Bateman

Abstract: Grammar development environments (GDE's) for analysis and for generation have not yet come together. Despite the fact that analysis-oriented GDE's (such as ALEP) may include some possibility of sentence generation, the development techniques and kinds of resources suggested are apparently not those required for practical, large-scale natural language generation work. Indeed, there is no use of `… ▽ More Grammar development environments (GDE's) for analysis and for generation have not yet come together. Despite the fact that analysis-oriented GDE's (such as ALEP) may include some possibility of sentence generation, the development techniques and kinds of resources suggested are apparently not those required for practical, large-scale natural language generation work. Indeed, there is no use of `standard' (i.e., analysis-oriented) GDE's in current projects/applications targetting the generation of fluent, coherent texts. This unsatisfactory situation requires some analysis and explanation, which this paper attempts using as an example an extensive GDE for generation. The support provided for distributed large-scale grammar development, multilinguality, and resource maintenance are discussed and contrasted with analysis-oriented approaches. △ Less

Submitted 19 November, 1997; originally announced November 1997.

Comments: 9 pages, EPS figures, uses: aclap.sty, psfig.sty Paper presented at the ACL/EACL'97 Madrid Workshop on Computational Environments for Grammar Development and Linguistic Engineering

Emphatic generation: employing the theory of semantic emphasis for text generation

Authors: Elke Teich, Beate Firzlaff, John A. Bateman

Abstract: The paper deals with the problem of text generation and planning approaches making only limited formally specifiable contact with accounts of grammar. We propose an enhancement of a systemically-based generation architecture for German (the KOMET system) by aspects of Kunze's theory of semantic emphasis. Doing this, we gain more control over both concept selection in generation and choice of fin… ▽ More The paper deals with the problem of text generation and planning approaches making only limited formally specifiable contact with accounts of grammar. We propose an enhancement of a systemically-based generation architecture for German (the KOMET system) by aspects of Kunze's theory of semantic emphasis. Doing this, we gain more control over both concept selection in generation and choice of fine-grained grammatical variation. △ Less

Submitted 25 April, 1997; originally announced April 1997.

Comments: 11pp; uses: 11pt,twocolumn,named,a4wide,program,psfig; 1psfig

The Theoretical Status of Ontologies in Natural Language Processing

Authors: John A. Bateman

Abstract: This paper discusses the use of `ontologies' in Natural Language Processing. It classifies various kinds of ontologies that have been employed in NLP and discusses various benefits and problems with those designs. Particular focus is then placed on experiences gained in the use of the Upper Model, a linguistically-motivated `ontology' originally designed for use with the Penman text generation s… ▽ More This paper discusses the use of `ontologies' in Natural Language Processing. It classifies various kinds of ontologies that have been employed in NLP and discusses various benefits and problems with those designs. Particular focus is then placed on experiences gained in the use of the Upper Model, a linguistically-motivated `ontology' originally designed for use with the Penman text generation system. Some proposals for further NLP ontology design criteria are then made. △ Less

Submitted 25 April, 1997; originally announced April 1997.

Comments: 43pp, uses: twocolumn,named,a4wide,psfig, 7eps figs