Showing 1–30 of 30 results for author: Efthymiopoulos, I

Exploring atmospheric neutrino oscillations at ESSnuSB

Authors: ESSnuSB, :, J. Aguilar, M. Anastasopoulos, E. Baussan, A. K. Bhattacharyya, A. Bignami, M. Blennow, M. Bogomilov, B. Bolling, E. Bouquerel, F. Bramati, A. Branca, G. Brunetti, I. Bustinduy, C. J. Carlile, J. Cederkall, T. W. Choi, S. Choubey, P. Christiansen, M. Collins, E. Cristaldo Morales, P. Cupiał, H. Danared, J. P. A. M. de André , et al. (64 additional authors not shown)

Abstract: This study provides an analysis of atmospheric neutrino oscillations at the ESSnuSB far detector facility. The prospects of the two cylindrical Water Cherenkov detectors with a total fiducial mass of 540 kt are investigated over 10 years of data taking in the standard three-flavor oscillation scenario. We present the confidence intervals for the determination of mass ordering, $θ_{23}$ octant as w… ▽ More This study provides an analysis of atmospheric neutrino oscillations at the ESSnuSB far detector facility. The prospects of the two cylindrical Water Cherenkov detectors with a total fiducial mass of 540 kt are investigated over 10 years of data taking in the standard three-flavor oscillation scenario. We present the confidence intervals for the determination of mass ordering, $θ_{23}$ octant as well as for the precisions on $\sin^2θ_{23}$ and $|Δm_{31}^2|$. It is shown that mass ordering can be resolved by $3σ$ CL ($5σ$ CL) after 4 years (10 years) regardless of the true neutrino mass ordering. Correspondingly, the wrong $θ_{23}$ octant could be excluded by $3σ$ CL after 4 years (7 years) in the case where the true neutrino mass ordering is normal ordering (inverted ordering). The results presented in this work are complementary to the accelerator neutrino program in the ESSnuSB project. △ Less

Submitted 31 July, 2024; originally announced July 2024.

Comments: 13 pages, 6 figures, 2 tables

Decoherence in Neutrino Oscillation at the ESSnuSB Experiment

Authors: ESSnuSB, :, J. Aguilar, M. Anastasopoulos, E. Baussan, A. K. Bhattacharyya, A. Bignami, M. Blennow, M. Bogomilov, B. Bolling, E. Bouquerel, F. Bramati, A. Branca, G. Brunetti, I. Bustinduy, C. J. Carlile, J. Cederkall, T. W. Choi, S. Choubey, P. Christiansen, M. Collins, E. Cristaldo Morales, P. Cupiał, H. Danared, D. Dancila , et al. (72 additional authors not shown)

Abstract: Neutrino oscillation experiments provide a unique window in exploring several new physics scenarios beyond the standard three flavour. One such scenario is quantum decoherence in neutrino oscillation which tends to destroy the interference pattern of neutrinos reaching the far detector from the source. In this work, we study the decoherence in neutrino oscillation in the context of the ESSnuSB exp… ▽ More Neutrino oscillation experiments provide a unique window in exploring several new physics scenarios beyond the standard three flavour. One such scenario is quantum decoherence in neutrino oscillation which tends to destroy the interference pattern of neutrinos reaching the far detector from the source. In this work, we study the decoherence in neutrino oscillation in the context of the ESSnuSB experiment. We consider the energy-independent decoherence parameter and derive the analytical expressions for P$_{μe}$ and P$_{μμ}$ probabilities in vacuum. We have computed the capability of ESSnuSB to put bounds on the decoherence parameters namely, $Γ_{21}$ and $Γ_{32}$ and found that the constraints on $Γ_{21}$ are competitive compared to the DUNE bounds and better than the most stringent LBL ones from MINOS/MINOS+. We have also investigated the impact of decoherence on the ESSnuSB measurement of the Dirac CP phase $δ_{\rm CP}$ and concluded that it remains robust in the presence of new physics. △ Less

Submitted 2 August, 2024; v1 submitted 26 April, 2024; originally announced April 2024.

Comments: 30 pages, 9 figures, 2 tables, Version accepted for publication in JHEP

Journal ref: JHEP 08 (2024) 063

Laboratory realization of relativistic pair-plasma beams

Authors: C. D. Arrowsmith, P. Simon, P. Bilbao, A. F. A. Bott, S. Burger, H. Chen, F. D. Cruz, T. Davenne, I. Efthymiopoulos, D. H. Froula, A. M. Goillot, J. T. Gudmundsson, D. Haberberger, J. Halliday, T. Hodge, B. T. Huffman, S. Iaquinta, F. Miniati, B. Reville, S. Sarkar, A. A. Schekochihin, L. O. Silva, R. Simpson, V. Stergiou, R. M. G. M. Trines , et al. (4 additional authors not shown)

Abstract: Relativistic electron-positron plasmas are ubiquitous in extreme astrophysical environments such as black holes and neutron star magnetospheres, where accretion-powered jets and pulsar winds are expected to be enriched with such pair plasmas. Their behaviour is quite different from typical electron-ion plasmas due to the matter-antimatter symmetry of the charged components and their role in the dy… ▽ More Relativistic electron-positron plasmas are ubiquitous in extreme astrophysical environments such as black holes and neutron star magnetospheres, where accretion-powered jets and pulsar winds are expected to be enriched with such pair plasmas. Their behaviour is quite different from typical electron-ion plasmas due to the matter-antimatter symmetry of the charged components and their role in the dynamics of such compact objects is believed to be fundamental. So far, our experimental inability to produce large yields of positrons in quasi-neutral beams has restricted the understanding of electron-positron pair plasmas to simple numerical and analytical studies which are rather limited. We present first experimental results confirming the generation of high-density, quasi-neutral, relativistic electron-positron pair beams using the 440 GeV/c beam at CERN's Super Proton Synchrotron (SPS) accelerator. The produced pair beams have a volume that fills multiple Debye spheres and are thus able to sustain collective plasma oscillations. Our work opens up the possibility of directly probing the microphysics of pair plasmas beyond quasi-linear evolution into regimes that are challenging to simulate or measure via astronomical observations. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 14 pages, 8 figures

Study of non-standard interaction mediated by a scalar field at ESSnuSB experiment

Authors: ESSnuSB, :, J. Aguilar, M. Anastasopoulos, E. Baussan, A. K. Bhattacharyya, A. Bignami, M. Blennow, M. Bogomilov, B. Bolling, E. Bouquerel, F. Bramati, A. Branca, W. Brorsson, I. Bustinduy, C. J. Carlile, J. Cederkall, T. W. Choi, S. Choubey, P. Christiansen, M. Collins, E. Cristaldo Morales, H. Danared, D. Dancila, J. P. A. M. de André , et al. (67 additional authors not shown)

Abstract: In this paper we study non-standard interactions mediated by a scalar field (SNSI) in the context of ESSnuSB experiment. In particular we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSI in the measurement of the leptonic CP phase $δ_{\rm CP}$. Existence of SNSI modifies the neutrino mass matrix and this modification can be expressed in terms o… ▽ More In this paper we study non-standard interactions mediated by a scalar field (SNSI) in the context of ESSnuSB experiment. In particular we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSI in the measurement of the leptonic CP phase $δ_{\rm CP}$. Existence of SNSI modifies the neutrino mass matrix and this modification can be expressed in terms of three diagonal real parameters ($η_{ee}$, $η_{μμ}$ and $η_{ττ}$) and three off-diagonal complex parameters ($η_{e μ}$, $η_{eτ}$ and $η_{μτ}$). Our study shows that the upper bounds on the parameters $η_{μμ}$, $η_{ττ}$ and $η_{μτ}$ depend upon how $Δm^2_{31}$ is minimized in the theory. However, this is not the case when one tries to measure the impact of SNSI on $δ_{\rm CP}$. Further, we show that the CP sensitivity of ESSnuSB can be completely lost for certain values of $η_{ee}$ and $η_{μτ}$ for which the appearance channel probability becomes independent of $δ_{\rm CP}$. △ Less

Submitted 26 April, 2024; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: 14 pages, 6 figures, 2 tables, Version accepted for publication in Phys. Rev. D

The ESSnuSB design study: overview and future prospects

Authors: ESSnuSB Collaboration, A. Alekou, E. Baussan, A. K. Bhattacharyya, N. Blaskovic Kraljevic, M. Blennow, M. Bogomilov, B. Bolling, E. Bouquerel, F. Bramati, A. Branca, O. Buchan, A. Burgman, C. J. Carlile, J. Cederkall, S. Choubey, P. Christiansen, M. Collins, E. Cristaldo Morales, L. D'Alessi, H. Danared, D. Dancila, J. P. A. M. de André, J. P. Delahaye, M. Dracos , et al. (61 additional authors not shown)

Abstract: ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental… ▽ More ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the 2nd maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization. △ Less

Submitted 8 August, 2023; v1 submitted 30 March, 2023; originally announced March 2023.

Comments: 19 pages, 12 figures; Final version after review by the Universe journal

Particle Physics at the European Spallation Source

Authors: H. Abele, A. Alekou, A. Algora, K. Andersen, S. Baessler, L. Barron-Palos, J. Barrow, E. Baussan, P. Bentley, Z. Berezhiani, Y. Bessler, A. K. Bhattacharyya, A. Bianchi, J. Bijnens, C. Blanco, N. Blaskovic Kraljevic, M. Blennow, K. Bodek, M. Bogomilov, C. Bohm, B. Bolling, E. Bouquerel, G. Brooijmans, L. J. Broussard, O. Buchan , et al. (154 additional authors not shown)

Abstract: Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons… ▽ More Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches). △ Less

Submitted 30 January, 2024; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: 121 pages, updated version after referee comments

The European Spallation Source neutrino Super Beam Conceptual Design Report

Authors: A. Alekou, E. Baussan, A. K. Bhattacharyya, N. Blaskovic Kraljevic, M. Blennow, M. Bogomilov, B. Bolling, E. Bouquerel, O. Buchan, A. Burgman, C. J. Carlile, J. Cederkall, P. Christiansen, M. Collins, E. Cristaldo Morales, P. Cupiał, L. D'Alessi, H. Danared, D. Dancila, J. P. A. M. de André, J. P. Delahaye, M. Dracos, I. Efthymiopoulos, T. Ekelöf, M. Eshraqi , et al. (51 additional authors not shown)

Abstract: This conceptual design report provides a detailed account of the European Spallation Source neutrino Super Beam (ESS$ν$SB) feasibility study. This facility has been proposed after the measurements reported in 2012 of a relatively large value of the neutrino mixing angle $θ_{13}$, which raised the possibility of observing potential CP violation in the leptonic sector with conventional neutrino beam… ▽ More This conceptual design report provides a detailed account of the European Spallation Source neutrino Super Beam (ESS$ν$SB) feasibility study. This facility has been proposed after the measurements reported in 2012 of a relatively large value of the neutrino mixing angle $θ_{13}$, which raised the possibility of observing potential CP violation in the leptonic sector with conventional neutrino beams. The measured value of $θ_{13}$ also privileges the $2^{nd}$ oscillation maximum for the discovery of CP violation instead of the more typically studied $1^{st}$ maximum. The sensitivity at this $2^{nd}$ oscillation maximum is about three times higher than at the $1^{st}$ one, which implies a reduced influence of systematic errors. Working at the $2^{nd}$ oscillation maximum requires a very intense neutrino beam with an appropriate energy. The world's most intense pulsed spallation neutron source, the European Spallation Source (ESS), will have a proton linac operating at 5\,MW power, 2\,GeV kinetic energy and 14~Hz repetition rate (3~ms pulse duration, 4\% duty cycle) for neutron production. In this design study it is proposed to double the repetition rate and compress the beam pulses to the level of microseconds in order to provide an additional 5~MW proton beam for neutrino production. The physics performance has been evaluated for such a neutrino super beam, in conjunction with a megaton-scale underground water Cherenkov neutrino detector installed at a distance of 360--550\,km from ESS. The ESS proton linac upgrades, the accumulator ring required for proton-pulse compression, the target station design and optimisation, the near and far detector complexes, and the physics potential of the facility are all described in this report. The ESS linac will be operational by 2025, at which point the implementation of upgrades for the neutrino facility could begin. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 216 pages

The European Spallation Source neutrino Super Beam

Authors: A. Alekou, E. Baussan, N. Blaskovic Kraljevic, M. Blennow, M. Bogomilov, E. Bouquerel, A. Burgman, C. J. Carlile, J. Cederkall, P. Christiansen, M. Collins, E. Cristaldo Morales, P. Cupial, L. D Alessi, H. Danared, J. P. A. M. de Andre, J. P. Delahaye, M. Dracos, I. Efthymiopoulos, T. Ekelof, M. Eshraqi, G. Fanourakis, E. Fernandez-Martinez, B. Folsom, N. Gazis , et al. (37 additional authors not shown)

Abstract: In this Snowmass 2021 white paper, we summarise the Conceptual Design of the European Spallation Source neutrino Super Beam (ESSvSB) experiment and its synergies with the possible future muon based facilities, e.g. a Low Energy nuSTORM and the Muon Collider. The ESSvSB will benefit from the high power, 5 MW, of the European Spallation Source (ESS) LINAC in Lund-Sweden to produce the world most int… ▽ More In this Snowmass 2021 white paper, we summarise the Conceptual Design of the European Spallation Source neutrino Super Beam (ESSvSB) experiment and its synergies with the possible future muon based facilities, e.g. a Low Energy nuSTORM and the Muon Collider. The ESSvSB will benefit from the high power, 5 MW, of the European Spallation Source (ESS) LINAC in Lund-Sweden to produce the world most intense neutrino beam, enabling measurements to be made at the second oscillation maximum. Assuming a ten-year exposure, physics simulations show that the CP-invariance violation can be established with a significance of 5 sigma over more than 70% of all values of delta CP and with an error in the measurement of the delta CP angle of less than 8 degree for all values of delta CP. However, several technological and physics challenges must be further studied before achieving a final Technical Design. Measuring at the 2nd oscillation maximum necessitates a very intense neutrino beam with the appropriate energy. For this, the ESS proton beam LINAC, which is designed to produce the world's most intense neutron beam, will need to be upgraded to 10 MW power, 2.5 GeV energy and 28 Hz beam pulse repetition rate. An accumulator ring will be required for the compression of the ESS LINAC beam pulse from 2.86 ms to 1.3 mus. A high power target station facility will be needed to produce a well-focused intense (super) mu-neutrino beam. The physics performance of that neutrino Super Beam in conjunction with a megaton underground Water Cherenkov neutrino far detector installed at a distance of either 360 km or 540 km from the ESS, the baseline, has been evaluated. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Study of dust-induced beam losses in the cryogenic arcs of the CERN Large Hadron Collider

Authors: A. Lechner, P. Bélanger, I. Efthymiopoulos, L. Grob, B. Lindstrom, R. Schmidt, D. Wollmann

Abstract: The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger bea… ▽ More The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger beam aborts or provoke quenches of superconducting magnets. In this paper, we study the characteristics of beam-dust particle interactions in the cryogenic arcs by reconstructing key observables like nuclear collision rates, loss durations and integral losses per event. The study is based on events recorded during 6.5 TeV operation with stored beam intensities of up to $\sim 3\times 10{^{14}}$ protons per beam. We show that inelastic collision rates can reach almost $10^{12}$ collisions per second, resulting in a loss of up to $\sim 1.6\times 10^{8}$ protons per event. We demonstrate that the experimental distributions and their dependence on beam parameters can be described quantitatively by a previously developed simulation model if dust particles are assumed to be attracted by the beam. The latter finding is consistent with recent time profile studies and yields further evidence that dust particles carry a negative charge when entering the beam. We also develop different hypotheses regarding the absence of higher-loss events in the measurements, although such events are theoretically not excluded by the simulation model. The results provide grounds for predicting dust-induced beam losses in presence of higher-intensity beams in future runs of the High-Luminosity LHC. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Comments: 19 pages, 14 figures, to be submitted to Phys. Rev. Accel. Beams

Updated physics performance of the ESSnuSB experiment

Authors: A. Alekou, E. Baussan, N. Blaskovic Kraljevic, M. Blennow, M. Bogomilov, E. Bouquerel, A. Burgman, C. J. Carlile, J. Cederkall, P. Christiansen, M. Collins, E. Cristaldo Morales, L. D'Alessi, H. Danared, J. P. A. M. de André, J. P. Delahaye, M. Dracos, I. Efthymiopoulos, T. Ekelöf, M. Eshraqi, G. Fanourakis, E. Fernandez-Martinez, B. Folsom, M. Ghosh, G. Gokbulut , et al. (26 additional authors not shown)

Abstract: In this paper, we present the physics performance of the ESSnuSB experiment in the standard three flavor scenario using the updated neutrino flux calculated specifically for the ESSnuSB configuration and updated migration matrices for the far detector. Taking conservative systematic uncertainties corresponding to a normalization error of $5\%$ for signal and $10\%$ for background, we find that the… ▽ More In this paper, we present the physics performance of the ESSnuSB experiment in the standard three flavor scenario using the updated neutrino flux calculated specifically for the ESSnuSB configuration and updated migration matrices for the far detector. Taking conservative systematic uncertainties corresponding to a normalization error of $5\%$ for signal and $10\%$ for background, we find that there is $10σ$ $(13σ)$ CP violation discovery sensitivity for the baseline option of 540 km (360 km) at $δ_{\rm CP} = \pm 90^\circ$. The corresponding fraction of $δ_{\rm CP}$ for which CP violation can be discovered at more than $5 σ$ is $70\%$. Regarding CP precision measurements, the $1σ$ error associated with $δ_{\rm CP} = 0^\circ$ is around $5^\circ$ and with $δ_{\rm CP} = -90^\circ$ is around $14^\circ$ $(7^\circ)$ for the baseline option of 540 km (360 km). For hierarchy sensitivity, one can have $3σ$ sensitivity for 540 km baseline except $δ_{\rm CP} = \pm 90^\circ$ and $5σ$ sensitivity for 360 km baseline for all values of $δ_{\rm CP}$. The octant of $θ_{23}$ can be determined at $3 σ$ for the values of: $θ_{23} > 51^\circ$ ($θ_{23} < 42^\circ$ and $θ_{23} > 49^\circ$) for baseline of 540 km (360 km). Regarding measurement precision of the atmospheric mixing parameters, the allowed values at $3 σ$ are: $40^\circ < θ_{23} < 52^\circ$ ($42^\circ < θ_{23} < 51.5^\circ$) and $2.485 \times 10^{-3}$ eV$^2 < Δm^2_{31} < 2.545 \times 10^{-3}$ eV$^2$ ($2.49 \times 10^{-3}$ eV$^2 < Δm^2_{31} < 2.54 \times 10^{-3}$ eV$^2$) for the baseline of 540 km (360 km). △ Less

Submitted 24 December, 2021; v1 submitted 25 June, 2021; originally announced July 2021.

Comments: 13 pages, 8 figures, 3 tables. Changes: Text updated, this is a published version

Journal ref: Eur. Phys. J. C 81, 1130 (2021)

The Cesium Source Calibration and Monitoring System of the ATLAS Tile Calorimeter: Design, Construction and Results

Authors: G. Blanchot, M. Bosman, J. Budagov, M. Cavalli-Sforza, I. Efthymiopoulos, A. Isaev, Y. Ivanyushenkov, A. Karyukhin, S. Kopikov, M. Nessi, V. Senko, N. Shalanda, M. Soldatov, A. Solodkov, O. Solovyanov, E. Starchenko, V. Tsoupko-Sitnikov, I. Vichou, A. Zaitsev

Abstract: This article describes the design, construction and use of a calibration and monitoring system, based on movable 137Cs gamma-ray sources, for the ATLAS Tile Calorimeter (TileCal). The sources, propelled by a water-based liquid through tubes that traverse all the calorimeter's cells, produce signals that precisely characterise the response of each tile, thereby providing very granular and accurate… ▽ More This article describes the design, construction and use of a calibration and monitoring system, based on movable 137Cs gamma-ray sources, for the ATLAS Tile Calorimeter (TileCal). The sources, propelled by a water-based liquid through tubes that traverse all the calorimeter's cells, produce signals that precisely characterise the response of each tile, thereby providing very granular and accurate data on the response of TileCal to particles. The system has been used to guide and control the quality of the optical instrumentation of all TileCal modules, to set and equalise the dynamic range of the response to physics data, and to set the energy scale of the readout system. In the ATLAS cavern, periodic measurements of the whole detector's response to 137Cs sources allow monitoring the uniformity and stability of all the calorimeter's cells as well as maintaining precise knowledge of its energy calibration. The design of the source hydraulic drive system's hardware and software, the data acquisition system and the data processing algorithms are described. Finally, the results of this two-decade program are shown. △ Less

Submitted 28 February, 2020; originally announced February 2020.

Interface with Experiments

Authors: H. Burkhardt, I. Efthymiopoulos

Abstract: Chapter 8 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper… ▽ More Chapter 8 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 4 pages, chapter 8 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report

Journal ref: CERN Yellow Report CERN 2015-005, pp.157-160

Response of a tungsten powder target to an incident high energy proton beam

Authors: Ottone Caretta, Tristan Davenne, Chris Densham, Mike Fitton, Peter Loveridge, Joey O' Dell, N. Charitonidis, I. Efthymiopoulos, A. Fabich, L. Rivkin

Abstract: The experiment described in this paper is the first study of the response of a static tungsten powder sample to an impinging high energy proton beam pulse. The experiment was carried out at the HiRadMat facility at CERN. Observations include high speed videos of a proton beam induced perturbation of the powder sample as well as data from a laser Doppler vibrometer measuring the oscillations of the… ▽ More The experiment described in this paper is the first study of the response of a static tungsten powder sample to an impinging high energy proton beam pulse. The experiment was carried out at the HiRadMat facility at CERN. Observations include high speed videos of a proton beam induced perturbation of the powder sample as well as data from a laser Doppler vibrometer measuring the oscillations of the powder container. A comparison with a previous analogous experiment which studied a proton beam interaction with mercury is made △ Less

Submitted 29 July, 2016; originally announced August 2016.

Journal ref: Physical Review Special Topics - Accelerators and Beams 17, 101005 (2014)

Beam performance and instrumentation studies for the ProtoDUNE-DP experiment of CENF

Authors: Nikolaos Charitonidis, Ilias Efthymiopoulos, Yannis Karyotakis

Abstract: In this note, we address the beam performance (particle content, rates) with emphasis on the momentum determination and particle identification methods for the new H2-VLE (Very Low Energy) beam line that will serve the double phase ProtoDUNE experiment (also known as WA105), in the framework of the CENF project. The proposed instrumentation is configured to achieve an optimal pi/K/proton separatio… ▽ More In this note, we address the beam performance (particle content, rates) with emphasis on the momentum determination and particle identification methods for the new H2-VLE (Very Low Energy) beam line that will serve the double phase ProtoDUNE experiment (also known as WA105), in the framework of the CENF project. The proposed instrumentation is configured to achieve an optimal pi/K/proton separation over the full spectrum of provided beam energies, from 0.4 GeV up to 12 GeV, as well as precise momentum measurement to a percent level, if required by the experiment. This note focuses on the H2-VLE beam line for the Double Phase ProtoDUNE experiment, however the same approach can be implemented for the H4-VLE beam, since the design of the two beam lines is very similar. △ Less

Submitted 3 August, 2016; v1 submitted 26 July, 2016; originally announced July 2016.

Report number: CERN-ACC-NOTE-2016-0052

The LBNO long-baseline oscillation sensitivities with two conventional neutrino beams at different baselines

Authors: LAGUNA-LBNO Collaboration, :, S. K. Agarwalla, L. Agostino, M. Aittola, A. Alekou, B. Andrieu, F. Antoniou, R. Asfandiyarov, D. Autiero, O. Bésida, A. Balik, P. Ballett, I. Bandac, D. Banerjee, W. Bartmann, F. Bay, B. Biskup, A. M. Blebea-Apostu, A. Blondel, M. Bogomilov, S. Bolognesi, E. Borriello, I. Brancus, A. Bravar , et al. (136 additional authors not shown)

Abstract: The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyhäsalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique o… ▽ More The proposed Long Baseline Neutrino Observatory (LBNO) initially consists of $\sim 20$ kton liquid double phase TPC complemented by a magnetised iron calorimeter, to be installed at the Pyhäsalmi mine, at a distance of 2300 km from CERN. The conventional neutrino beam is produced by 400 GeV protons accelerated at the SPS accelerator delivering 700 kW of power. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $δ_{CP}$ and matter. In this paper we show how this comprehensive physics case can be further enhanced and complemented if a neutrino beam produced at the Protvino IHEP accelerator complex, at a distance of 1160 km, and with modest power of 450 kW is aimed towards the same far detectors. We show that the coupling of two independent sub-MW conventional neutrino and antineutrino beams at different baselines from CERN and Protvino will allow to measure CP violation in the leptonic sector at a confidence level of at least $3σ$ for 50\% of the true values of $δ_{CP}$ with a 20 kton detector. With a far detector of 70 kton, the combination allows a $3σ$ sensitivity for 75\% of the true values of $δ_{CP}$ after 10 years of running. Running two independent neutrino beams, each at a power below 1 MW, is more within today's state of the art than the long-term operation of a new single high-energy multi-MW facility, which has several technical challenges and will likely require a learning curve. △ Less

Submitted 2 December, 2014; originally announced December 2014.

Comments: 21 pages, 12 figures

Optimised sensitivity to leptonic CP violation from spectral information: the LBNO case at 2300 km baseline

Authors: LAGUNA-LBNO Collaboration, :, S. K. Agarwalla, L. Agostino, M. Aittola, A. Alekou, B. Andrieu, F. Antoniou, R. Asfandiyarov, D. Autiero, O. Bésida, A. Balik, P. Ballett, I. Bandac, D. Banerjee, W. Bartmann, F. Bay, B. Biskup, A. M. Blebea-Apostu, A. Blondel, M. Bogomilov, S. Bolognesi, E. Borriello, I. Brancus, A. Bravar , et al. (136 additional authors not shown)

Abstract: One of the main goals of the Long Baseline Neutrino Observatory (LBNO) is to study the $L/E$ behaviour (spectral information) of the electron neutrino and antineutrino appearance probabilities, in order to determine the unknown CP-violation phase $δ_{CP}$ and discover CP-violation in the leptonic sector. The result is based on the measurement of the appearance probabilities in a broad range of ene… ▽ More One of the main goals of the Long Baseline Neutrino Observatory (LBNO) is to study the $L/E$ behaviour (spectral information) of the electron neutrino and antineutrino appearance probabilities, in order to determine the unknown CP-violation phase $δ_{CP}$ and discover CP-violation in the leptonic sector. The result is based on the measurement of the appearance probabilities in a broad range of energies, covering t he 1st and 2nd oscillation maxima, at a very long baseline of 2300 km. The sensitivity of the experiment can be maximised by optimising the energy spectra of the neutrino and anti-neutrino fluxes. Such an optimisation requires exploring an extended range of parameters describing in details the geometries and properties of the primary protons, hadron target and focusing elements in the neutrino beam line. In this paper we present a numerical solution that leads to an optimised energy spectra and study its impact on the sensitivity of LBNO to discover leptonic CP violation. In the optimised flux both 1st and 2nd oscillation maxima play an important role in the CP sensitivity. The studies also show that this configuration is less sensitive to systematic errors (e.g. on the total event rates) than an experiment which mainly relies on the neutrino-antineutrino asymmetry at the 1st maximum to determine the existence of CP-violation. △ Less

Submitted 1 December, 2014; originally announced December 2014.

Comments: 25 pages, 20 figures

LBNO-DEMO: Large-scale neutrino detector demonstrators for phased performance assessment in view of a long-baseline oscillation experiment

Authors: L. Agostino, B. Andrieu, R. Asfandiyarov, D. Autiero, O. Bésida, F. Bay, R. Bayes, A. M. Blebea-Apostu, A. Blondel, M. Bogomilov, S. Bolognesi, S. Bordoni, A. Bravar, M. Buizza-Avanzini, F. Cadoux, D. Caiulo, M. Calin, M. Campanelli, C. Cantini, L. Chaussard, D. Chesneanu, N. Colino, P. Crivelli, I. De Bonis, Y. Déclais , et al. (90 additional authors not shown)

Abstract: In June 2012, an Expression of Interest for a long-baseline experiment (LBNO) has been submitted to the CERN SPSC. LBNO considers three types of neutrino detector technologies: a double-phase liquid argon (LAr) TPC and a magnetised iron detector as far detectors. For the near detector, a high-pressure gas TPC embedded in a calorimeter and a magnet is the baseline design. A mandatory milestone is a… ▽ More In June 2012, an Expression of Interest for a long-baseline experiment (LBNO) has been submitted to the CERN SPSC. LBNO considers three types of neutrino detector technologies: a double-phase liquid argon (LAr) TPC and a magnetised iron detector as far detectors. For the near detector, a high-pressure gas TPC embedded in a calorimeter and a magnet is the baseline design. A mandatory milestone is a concrete prototyping effort towards the envisioned large-scale detectors, and an accompanying campaign of measurements aimed at assessing the detector associated systematic errors. The proposed $6\times 6\times 6$m$^3$ DLAr is an industrial prototype of the design discussed in the EoI and scalable to 20 kton or 50~kton. It is to be constructed and operated in a controlled laboratory and surface environment with test beam access, such as the CERN North Area (NA). Its successful operation and full characterisation will be a fundamental milestone, likely opening the path to an underground deployment of larger detectors. The response of the DLAr demonstrator will be measured and understood with an unprecedented precision in a charged particle test beam (0.5-20 GeV/c). The exposure will certify the assumptions and calibrate the response of the detector, and allow to develop and to benchmark sophisticated reconstruction algorithms, such as those of 3-dimensional tracking, particle ID and energy flow in liquid argon. All these steps are fundamental for validating the correctness of the physics performance described in the LBNO EoI. △ Less

Submitted 14 September, 2014; originally announced September 2014.

Comments: 217 pages, 164 figures, LBNO-DEMO (CERN WA105) Collaboration

Report number: CERN-SPSC-2014-013, SPSC-TDR-004

NA61/SHINE facility at the CERN SPS: beams and detector system

Authors: N. Abgrall, O. Andreeva, A. Aduszkiewicz, Y. Ali, T. Anticic, N. Antoniou, B. Baatar, F. Bay, A. Blondel, J. Blumer, M. Bogomilov, M. Bogusz, A. Bravar, J. Brzychczyk, S. A. Bunyatov, P. Christakoglou, T. Czopowicz, N. Davis, S. Debieux, H. Dembinski, F. Diakonos, S. DiLuise, W. Dominik, T. Drozhzhova, J. Dumarchez , et al. (123 additional authors not shown)

Abstract: NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the C… ▽ More NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March 2013. △ Less

Submitted 19 January, 2014; originally announced January 2014.

Report number: CERN-PH-EP-2014-003 MSC Class: 81V36

Journal ref: JINST 9 (2014) P06005

The mass-hierarchy and CP-violation discovery reach of the LBNO long-baseline neutrino experiment

Authors: LAGUNA-LBNO Collaboration, :, S. K. Agarwalla, L. Agostino, M. Aittola, A. Alekou, B. Andrieu, D. Angus, F. Antoniou, A. Ariga, T. Ariga, R. Asfandiyarov, D. Autiero, P. Ballett, I. Bandac, D. Banerjee, G. J. Barker, G. Barr, W. Bartmann, F. Bay, V. Berardi, I. Bertram, O. Bésida, A. M. Blebea-Apostu, A. Blondel , et al. (193 additional authors not shown)

Abstract: The next generation neutrino observatory proposed by the LBNO collaboration will address fundamental questions in particle and astroparticle physics. The experiment consists of a far detector, in its first stage a 20 kt LAr double phase TPC and a magnetised iron calorimeter, situated at 2300 km from CERN and a near detector based on a high-pressure argon gas TPC. The long baseline provides a uniqu… ▽ More The next generation neutrino observatory proposed by the LBNO collaboration will address fundamental questions in particle and astroparticle physics. The experiment consists of a far detector, in its first stage a 20 kt LAr double phase TPC and a magnetised iron calorimeter, situated at 2300 km from CERN and a near detector based on a high-pressure argon gas TPC. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $δ_{CP}$ and matter. In this paper we have reevaluated the physics potential of this setup for determining the mass hierarchy (MH) and discovering CP-violation (CPV), using a conventional neutrino beam from the CERN SPS with a power of 750 kW. We use conservative assumptions on the knowledge of oscillation parameter priors and systematic uncertainties. The impact of each systematic error and the precision of oscillation prior is shown. We demonstrate that the first stage of LBNO can determine unambiguously the MH to $>5σ$C.L. over the whole phase space. We show that the statistical treatment of the experiment is of very high importance, resulting in the conclusion that LBNO has $\sim$ 100% probability to determine the MH in at most 4-5 years of running. Since the knowledge of MH is indispensable to extract $δ_{CP}$ from the data, the first LBNO phase can convincingly give evidence for CPV on the $3σ$C.L. using today's knowledge on oscillation parameters and realistic assumptions on the systematic uncertainties. △ Less

Submitted 20 January, 2014; v1 submitted 23 December, 2013; originally announced December 2013.

Comments: 35 pages, 22 figures, added authors

Emission of forward neutrons by 158A GeV indium nuclei in collisions with Al, Cu, Sn and Pb

Authors: E. V. Karpechev, I. A. Pshenichnov, T. L. Karavicheva, A. B. Kurepin, M. B. Golubeva, F. F. Guber, A. I. Maevskaia, A. I. Reshetin, V. V. Tiflov, N. S. Topilskaya, P. Cortese, G. Dellacasa, R. Arnaldi, N. DeMarco, A. Ferretti, M. Gallio, A. Musso, C. Oppedisano, A. Piccotti, E. Scomparin, E. Vercellin, C. Cicalo, G. Puddu, E. Siddi, P. Szymanski , et al. (1 additional authors not shown)

Abstract: The cross sections of forward emission of one, two and three neutrons by 158A GeV 115In nuclei in collisions with Al, Cu, Sn and Pb targets are reported. The measurements were performed in the framework of the ALICE-LUMI experiment at the SPS facility at CERN. Various corrections accounting for the absorption of beam nuclei and produced neutrons in target material and surrounding air were introduc… ▽ More The cross sections of forward emission of one, two and three neutrons by 158A GeV 115In nuclei in collisions with Al, Cu, Sn and Pb targets are reported. The measurements were performed in the framework of the ALICE-LUMI experiment at the SPS facility at CERN. Various corrections accounting for the absorption of beam nuclei and produced neutrons in target material and surrounding air were introduced. The corrected cross section data are compared with the predictions of the RELDIS model for electromagnetic fragmentation of 115In in ultraperipheral collisions, as well as with the results of the abrasion-ablation model for neutron emission in hadronic interactions. The measured neutron emission cross sections well agree with the RELDIS results, with the exception of In-Al collisions where the measured cross sections are larger compared to RELDIS. This is attributed to a relatively large contribution of hadronic fragmentation of In on Al target with respect to electromagnetic fragmentation, on the contrary to similar measurements performed earlier with 30A GeV 208Pb colliding with Al. △ Less

Submitted 30 December, 2013; v1 submitted 21 July, 2013; originally announced July 2013.

Comments: 14 pages, 9 figures, 11 tables: updates to the paper structure, typos fixed in version 2

Journal ref: Nuclear Physics A 921 (2014) 60-84

The EUROnu Project

Authors: T. R. Edgecock, O. Caretta, T. Davenne, C. Densham, M. Fitton, D. Kelliher, P. Loveridge, S. Machida, C. Prior, C. Rogers, M. Rooney, J. Thomason, D. Wilcox, E. Wildner, I. Efthymiopoulos, R. Garoby, S. Gilardoni, C. Hansen, E. Benedetto, E. Jensen, A. Kosmicki, M. Martini, J. Osborne, G. Prior, T. Stora , et al. (146 additional authors not shown)

Abstract: The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the… ▽ More The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive. △ Less

Submitted 17 May, 2013; originally announced May 2013.

Comments: Results from the Framework Programme 7 project EUROnu, which studied three possible accelerator facilities for future high intensity neutrino oscillation facilities in Europe

Journal ref: Phys. Rev. ST Accel. Beams 16 021002 (2013)

European Strategy for Accelerator-Based Neutrino Physics

Authors: Sergio Bertolucci, Alain Blondel, Anselmo Cervera, Andrea Donini, Marcos Dracos, Dominique Duchesneau, Fanny Dufour, Rob Edgecock, Ilias Efthymiopoulos, Edda Gschwendtner, Yury Kudenko, Ken Long, Jukka Maalampi, Mauro Mezzetto, Silvia Pascoli, Vittorio Palladino, Ewa Rondio, Andre Rubbia, Carlo Rubbia, Achim Stahl, Luca Stanco, Jenny Thomas, David Wark, Elena Wildner, Marco Zito

Abstract: Massive neutrinos reveal physics beyond the Standard Model, which could have deep consequences for our understanding of the Universe. Their study should therefore receive the highest level of priority in the European Strategy. The discovery and study of leptonic CP violation and precision studies of the transitions between neutrino flavours require high intensity, high precision, long baseline acc… ▽ More Massive neutrinos reveal physics beyond the Standard Model, which could have deep consequences for our understanding of the Universe. Their study should therefore receive the highest level of priority in the European Strategy. The discovery and study of leptonic CP violation and precision studies of the transitions between neutrino flavours require high intensity, high precision, long baseline accelerator neutrino experiments. The community of European neutrino physicists involved in oscillation experiments is strong enough to support a major neutrino long baseline project in Europe, and has an ambitious, competitive and coherent vision to propose. Following the 2006 European Strategy for Particle Physics (ESPP) recommendations, two complementary design studies have been carried out: LAGUNA/LBNO, focused on deep underground detector sites, and EUROnu, focused on high intensity neutrino facilities. LAGUNA LBNO recommends, as first step, a conventional neutrino beam CN2PY from a CERN SPS North Area Neutrino Facility (NANF) aimed at the Pyhasalmi mine in Finland. A sterile neutrino search experiment which could also be situated in the CERN north area has been proposed (ICARUS-NESSIE) using a two detector set-up, allowing a definitive answer to the 20 year old question open by the LSND experiment. EUROnu concluded that a 10 GeV Neutrino Factory, aimed at a magnetized neutrino detector situated, also, at a baseline of around 2200 km (+-30%), would constitute the ultimate neutrino facility; it recommends that the next 5 years be devoted to the R&D, preparatory experiments and implementation study, in view of a proposal before the next ESPP update. The coherence and quality of this program calls for the continuation of neutrino beams at CERN after the CNGS, and for a high priority support from CERN and the member states to the experiments and R&D program. △ Less

Submitted 2 August, 2012; originally announced August 2012.

Comments: Prepared by the program committee of the Neutrino `town meeting', CERN, 14-16 May 2012 and submitted to the European Strategy For European Particle Physics

The Very Low 1-9 GeV/c Tertiary Beam Extension of the H8 Beam Line of CERN SPS

Authors: Ilias Efthymiopoulos, Adrian Fabich

Abstract: The H8 beam line on the North Area of CERN SPS is a multipurpose experimental secondary particle beam able to transport particles of various types (hadrons, electrons, muons and ions) in a large momentum range from 10 GeV/c up to the top SPS energy (400 or 450 GeV/C). During the 2003-2004 shutdown the beam line was modified in order to accommodate a new tertiary beam line, able to produce and tran… ▽ More The H8 beam line on the North Area of CERN SPS is a multipurpose experimental secondary particle beam able to transport particles of various types (hadrons, electrons, muons and ions) in a large momentum range from 10 GeV/c up to the top SPS energy (400 or 450 GeV/C). During the 2003-2004 shutdown the beam line was modified in order to accommodate a new tertiary beam line, able to produce and transport particles in the momentum range of 1 to 9 GeV/c. Such low momentum hadron and electron particle beams are requested by the LHC experiments in order to calibrate various sub-detector systems. The design and first performance results from this new tertiary beam are described here. △ Less

Submitted 11 June, 2012; originally announced June 2012.

Report number: CERN-AB---2005-036

Interim Design Report

Authors: R. J. Abrams, S. K. Agarwalla, A. Alekou, C. Andreopoulos, C. M. Ankenbrandt, S. Antusch, M. Apollonio, M. Aslaninejad, J. Back, P. Ballett, G. Barker, K. B. Beard, E. Benedetto, J. R. J. Bennett, J. S. Berg, S. Bhattacharya, V. Blackmore, M. Blennow, A. Blondel, A. Bogacz, M. Bonesini, C. Bontoiu, C. Booth, C. Bromberg, S. Brooks , et al. (111 additional authors not shown)

Abstract: The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires a… ▽ More The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Report number: IDS-NF-020; BNL-96453-2011; CERN-ATS-2011-216; EUROnu-WP1-05; FERMILAB-PUB-11-581-APC; RAL-TR-2011-018

Measurement of the neutrino velocity with the OPERA detector in the CNGS beam

Authors: The OPERA Collaboration, T. Adam, N. Agafonova, A. Aleksandrov, O. Altinok, P. Alvarez Sanchez, A. Anokhina, S. Aoki, A. Ariga, T. Ariga, D. Autiero, A. Badertscher, A. Ben Dhahbi, A. Bertolin, C. Bozza, T. Brugiere, R. Brugnera, F. Brunet, G. Brunetti, S. Buontempo, B. Carlus, F. Cavanna, A. Cazes, L. Chaussard, M. Chernyavsky , et al. (166 additional authors not shown)

Abstract: The OPERA neutrino experiment at the underground Gran Sasso Laboratory has measured the velocity of neutrinos from the CERN CNGS beam over a baseline of about 730 km. The measurement is based on data taken by OPERA in the years 2009, 2010 and 2011. Dedicated upgrades of the CNGS timing system and of the OPERA detector, as well as a high precision geodesy campaign for the measurement of the neutrin… ▽ More The OPERA neutrino experiment at the underground Gran Sasso Laboratory has measured the velocity of neutrinos from the CERN CNGS beam over a baseline of about 730 km. The measurement is based on data taken by OPERA in the years 2009, 2010 and 2011. Dedicated upgrades of the CNGS timing system and of the OPERA detector, as well as a high precision geodesy campaign for the measurement of the neutrino baseline, allowed reaching comparable systematic and statistical accuracies. An arrival time of CNGS muon neutrinos with respect to the one computed assuming the speed of light in vacuum of (6.5 +/- 7.4(stat.)((+8.3)(-8.0)sys.))ns was measured corresponding to a relative difference of the muon neutrino velocity with respect to the speed of light (v-c)/c =(2.7 +/-3.1(stat.)((+3.4)(-3.3)(sys.))x10^(-6). The above result, obtained by comparing the time distributions of neutrino interactions and of protons hitting the CNGS target in 10.5 microseconds long extractions, was confirmed by a test performed at the end of 2011 using a short bunch beam allowing to measure the neutrino time of flight at the single interaction level. △ Less

Submitted 12 July, 2012; v1 submitted 22 September, 2011; originally announced September 2011.

Comments: 34 pages, 22 figures This version replaces all previous ones

A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test

Authors: E. Abat, J. M. Abdallah, T. N. Addy, P. Adragna, M. Aharrouche, A. Ahmad, T. P. A. Akesson, M. Aleksa, C. Alexa, K. Anderson, A. Andreazza, F. Anghinolfi, A. Antonaki, G. Arabidze, E. Arik, T. Atkinson, J. Baines, O. K. Baker, D. Banfi, S. Baron, A. J. Barr, R. Beccherle, H. P. Beck, B. Belhorma, P. J. Bell , et al. (460 additional authors not shown)

Abstract: A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in… ▽ More A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale. △ Less

Submitted 12 May, 2011; v1 submitted 20 December, 2010; originally announced December 2010.

Comments: 36 pages, 12 figures, accepted by JINST

Report number: ATL-COM-CAL-2010-006

Journal ref: JINST 6 (2011) P06001

Luminosity measurement at ATLAS - development, construction and test of scintillating fibre prototype detectors

Authors: S. Ask, P. Barillon, A. Braem, C. Cheiklali, I. Efthymiopoulos, D. Fournier, C. de La Taille, B. Di Girolamo, P. Grafstroem, C. Joram, M. Haguenauer, V. Hedberg, B. Lavigne, A. Maio, A. Mapelli, U. Mjoernmark, P. Puzo, M. Rijssenbeek, J. Santos, J. G. Saraiva, H. Stenzel, M. Thioye, E. Valladolid, V. Vorobel

Abstract: We are reporting about a scintillating fibre tracker which is proposed for the precise determination of the absolute luminosity of the CERN LHC at interaction point 1 where the ATLAS experiment is located. The detector needs to track protons elastically scattered under micro-rad angles in direct vicinity to the LHC beam. It is based on square shaped scintillating plastic fibres read out by multi… ▽ More We are reporting about a scintillating fibre tracker which is proposed for the precise determination of the absolute luminosity of the CERN LHC at interaction point 1 where the ATLAS experiment is located. The detector needs to track protons elastically scattered under micro-rad angles in direct vicinity to the LHC beam. It is based on square shaped scintillating plastic fibres read out by multi-anode photomultiplier tubes and is housed in Roman Pots. We describe the design and construction of prototype detectors and the results of a beam test experiment at DESY. The excellent detector performance established in this test validates the detector design and supports the feasibility of the proposed challenging method of luminosity measurement. △ Less

Submitted 16 May, 2006; originally announced May 2006.

Journal ref: Nucl.Instrum.Meth.A568:588-600,2006

Elastic Cross-Section and Luminosity Measurement in ATLAS at LHC

Authors: Ilias Efthymiopoulos

Abstract: Recently the ATLAS experiment was complemented with a set of ultra-small-angle detectors located in ``Roman Pot'' inserts at 240m on either side of the interaction point, aiming at the absolute determination of the LHC luminosity by measuring the elastic scattering rate at the Coulomb Nuclear Interference region. Details of the proposed measurement the detector construction and the expected perf… ▽ More Recently the ATLAS experiment was complemented with a set of ultra-small-angle detectors located in ``Roman Pot'' inserts at 240m on either side of the interaction point, aiming at the absolute determination of the LHC luminosity by measuring the elastic scattering rate at the Coulomb Nuclear Interference region. Details of the proposed measurement the detector construction and the expected performance as well as the challenges involved are discussed here. △ Less

Submitted 30 October, 2005; originally announced October 2005.

Comments: EDS05, Blois, France, May 15-20, 2005

Investigation of top mass measurements with the ATLAS detector at LHC

Authors: I. Borjanovic, I. Efthymiopoulos, F. Fassi, P. Grenier, P. Homola, V. Kostioukhine, R. Leitner, I. Mendas, D. Pallin, D. Popovic, P. Roy, V. Simak, L. Simic, G. Skoro, J. Valenta

Abstract: Several methods for the determination of the mass of the top quark with the ATLAS detector at the LHC are presented. All dominant decay channels of the top quark can be explored. The measurements are in most cases dominated by systematic uncertainties. New methods have been developed to control those related to the detector. The results indicate that a total error on the top mass at the level of… ▽ More Several methods for the determination of the mass of the top quark with the ATLAS detector at the LHC are presented. All dominant decay channels of the top quark can be explored. The measurements are in most cases dominated by systematic uncertainties. New methods have been developed to control those related to the detector. The results indicate that a total error on the top mass at the level of 1 GeV should be achievable. △ Less

Submitted 15 March, 2004; originally announced March 2004.

Comments: 47 pages, 40 figures

Journal ref: Eur.Phys.J.C39S2:63-90,2005

Top Quark Physics

Authors: M. Beneke, I. Efthymiopoulos, M. L. Mangano, J. Womersley, A. Ahmadov, G. Azuelos, U. Baur, A. Belyaev, E. L. Berger, W. Bernreuther, E. E. Boos, M. Bosman, A. Brandenburg, R. Brock, M. Buice, N. Cartiglia, F. Cerutti, A. Cheplakov, L. Chikovani, M. Cobal-Grassmann, G. Corcella, F. del Aguila, T. Djobava, J. Dodd, V. Drollinger , et al. (53 additional authors not shown)

Abstract: We review the prospects for studies of the top quark at the LHC. We review the prospects for studies of the top quark at the LHC. △ Less

Submitted 4 March, 2000; originally announced March 2000.

Comments: 111 pages, Latex, to appear in the Report of the ``1999 CERN Workshop on SM physics (and more) at the LHC'', M.Beneke, I.Efthymiopoulos, M.L.Mangano, J.Womersley (conveners)

Report number: CERN-TH/2000-100