-
First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1341 additional authors not shown)
Abstract:
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each…
▽ More
ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Supernova Pointing Capabilities of DUNE
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr…
▽ More
The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.
△ Less
Submitted 14 July, 2024;
originally announced July 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Two-Way Quantum Time Transfer: A Method for Daytime Space-Earth Links
Authors:
Randy Lafler,
Mark L. Eickhoff,
Scott C. Newey,
Yamil Nieves Gonzalez,
Kurt E. Stoltenburg,
J. Frank Camacho,
Mark A. Harris,
Denis W. Oesch,
Adrian J. Lewis,
R. Nicholas Lanning
Abstract:
High-precision remote clock synchronization is crucial for many classical and quantum network applications. Evaluating options for space-Earth links, we find that traditional solutions may not produce the desired synchronization for low Earth orbits and unnecessarily complicate quantum-networking architectures. Demonstrating an alternative, we use commercial off-the-shelf quantum-photon sources an…
▽ More
High-precision remote clock synchronization is crucial for many classical and quantum network applications. Evaluating options for space-Earth links, we find that traditional solutions may not produce the desired synchronization for low Earth orbits and unnecessarily complicate quantum-networking architectures. Demonstrating an alternative, we use commercial off-the-shelf quantum-photon sources and detection equipment to synchronize two remote clocks across our freespace testbed utilizing a method called two-way quantum time transfer (QTT). We reach picosecond-scale timing precision under very lossy and noisy channel conditions representative of daytime space-Earth links and software-emulated satellite motion. This work demonstrates how QTT is potentially relevant for daytime space-Earth quantum networking and/or providing high-precision timing in GPS-denied environments.
△ Less
Submitted 9 April, 2024; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1294 additional authors not shown)
Abstract:
A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics…
▽ More
A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $σ(E_ν)$ for charged-current $ν_e$ absorption on argon. In the context of a simulated extraction of supernova $ν_e$ spectral parameters from a toy analysis, we investigate the impact of $σ(E_ν)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $σ(E_ν)$ must be substantially reduced before the $ν_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $σ(E_ν)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $σ(E_ν)$. A direct measurement of low-energy $ν_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level.
△ Less
Submitted 7 July, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Experimental and Numerical Investigations on Robustness of a Deep Neural Network-based Multi-class Classification Model of CT Images with respect to Image Noise
Authors:
Yuting Peng,
Chenyang Shen,
Yesenia Gonzalez,
Yin Gao,
Xun Jia
Abstract:
Robustness of Deep Neural Networks (DNNs) is an important aspect to consider for their clinical applications. This work examined robustness issue for a DNN-based multi-class classification model via comprehensive experimental and simulation studies. We constructed a DNN-based multi-class classification model that classifies an axial CT image as one of the four body sites of brain & neck (BN), ches…
▽ More
Robustness of Deep Neural Networks (DNNs) is an important aspect to consider for their clinical applications. This work examined robustness issue for a DNN-based multi-class classification model via comprehensive experimental and simulation studies. We constructed a DNN-based multi-class classification model that classifies an axial CT image as one of the four body sites of brain & neck (BN), chest (C), abdomen & pelvis (AP), and leg & foot (LF). The model was trained with whole-body CT images of 37 patients each scanned once and 10 scans of a whole-body phantom with different mAs levels to achieve a F1 score of 99.7% averaged over four classes on a testing dataset. We evaluated robustness of the model against noise perturbations under different mAs levels using simulated CT noisy images based on noise power spectrum (NPS) and experimental CT images acquired in repeated scans of the orange-man phantom. To quantify robustness of the trained model, we defined Successful Attack Rate (SAR) as the ratio of predictions changed with noises and Confusion Matrix for Robustness (CMR) that represents the percentage of a predicted class without noise being predicted to different classes under noise. Besides, we repeatedly trained the model for 100 times using exactly the same training procedure, hyper-parameter settings, as well as the training and validation dataset to investigate robustness of models due to inherent randomness in the training process. Finally, to improve model robustness, we employed an adaptive training scheme and demonstrated its effectiveness. Experimental and numerical studies demonstrated robustness issue of a DNN-based multi-class classification model. The discoveries highlight the needs for evaluating and ensuring DNN model robustness.
△ Less
Submitted 4 March, 2023;
originally announced March 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Interfacial strain defines the self-organization of epitaxial MoO2 flakes and porous films on sapphire: experiments and modelling
Authors:
O. de Melo,
V. Torres_Costa,
Y. Gonzalez,
A. Ruediger,
C. de Melo,
J. Ghanbaja,
D. Horwat,
A. Escobosa,
O. Concepcion,
G. Santana,
E. Ramos
Abstract:
The epitaxy of MoO2 on c_plane sapphire substrates is examined. A theoretical approach, based on density functional theory calculations of the strain energy, allowed to predict the preferred layer/substrate epitaxial relationships. To test the results of these calculations, MoO2/(001) Al2O3 heterostructures were grown using the chemically_driven isothermal close space vapour transport technique. A…
▽ More
The epitaxy of MoO2 on c_plane sapphire substrates is examined. A theoretical approach, based on density functional theory calculations of the strain energy, allowed to predict the preferred layer/substrate epitaxial relationships. To test the results of these calculations, MoO2/(001) Al2O3 heterostructures were grown using the chemically_driven isothermal close space vapour transport technique. At the early stages of the growth, two kinds of morphologies were obtained, using the same growth parameters: lying and standing flakes. The composition and morphology, as well as the layer/substrate epitaxial relationships were determined for both kind of morphologies. Experimental epitaxial relationships coincide with those predicted by DFT calculation as the most favourable ones in terms of strain energy. For thicker films, the standing flakes evolve to form an epitaxial porous layer composed by coalesced epitaxial flakes. The interfacial strain between the sapphire substrate and MoO2 enables a self_organization from nanometer to micron scales between separated or coalesced flakes, depending on deposition condition.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
Properties of MoO2 and MoO3 Films Prepared from the Chemically Driven Isothermal Close Space Vapor Transport Technique
Authors:
O. de Melo,
Y. Gonzalez,
A. Climent-Font,
P. Galan,
A. Ruediger,
M. Sanchez,
C. Calvo,
G. Santana,
V. Torres-Costa
Abstract:
Chemically _ driven isothermal close space vapour transport was used to prepare pure MoO2 films which were eventually converted to MoO3 by annealing in air. According to temperature_dependent Raman measurements, the MoO2/MoO3 phase transformation was found to occur in the 225 _ 350 oC range; no other phases were detected during the transition. A clear change in composition and Raman spectra, as we…
▽ More
Chemically _ driven isothermal close space vapour transport was used to prepare pure MoO2 films which were eventually converted to MoO3 by annealing in air. According to temperature_dependent Raman measurements, the MoO2/MoO3 phase transformation was found to occur in the 225 _ 350 oC range; no other phases were detected during the transition. A clear change in composition and Raman spectra, as well as noticeable modifications of the band gap and the absorption coefficient confirmed the conversion from MoO2 to MoO3. An extensive characterization of films of both pure phases was carried out. In particular, a procedure was developed to determine the dispersion relation of the refractive index of MoO2 from the shift of the interference fringes the used SiO2/Si substrate. The obtained refractive index was corrected taking into account the porosity calculated from elastic backscattering spectrometry. The Debye temperature and the residual resistivity were extracted from the electrical resistivity temperature dependence using the Bloch _ Gruneisen equation. MoO3 converted samples presented very high resistivity and a typical semiconducting behaviour. They also showed intense and broad luminescence spectra, which were deconvoluted considering several contributions; and its behaviour with temperature was examined. Furthermore, surface photovoltage spectra were taken and the relation of these spectra with the photoluminescence is discussed.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
Improving Efficiency of Training a Virtual Treatment Planner Network via Knowledge-guided Deep Reinforcement Learning for Intelligent Automatic Treatment Planning of Radiotherapy
Authors:
Chenyang Shen,
Liyuan Chen,
Yesenia Gonzalez,
Xun Jia
Abstract:
We previously proposed an intelligent automatic treatment planning framework for radiotherapy, in which a virtual treatment planner network (VTPN) was built using deep reinforcement learning (DRL) to operate a treatment planning system (TPS). Despite the success, the training of VTPN via DRL was time consuming. Also the training time is expected to grow with the complexity of the treatment plannin…
▽ More
We previously proposed an intelligent automatic treatment planning framework for radiotherapy, in which a virtual treatment planner network (VTPN) was built using deep reinforcement learning (DRL) to operate a treatment planning system (TPS). Despite the success, the training of VTPN via DRL was time consuming. Also the training time is expected to grow with the complexity of the treatment planning problem, preventing the development of VTPN for more complicated but clinically relevant scenarios. In this study we proposed a knowledge-guided DRL (KgDRL) that incorporated knowledge from human planners to guide the training process to improve the training efficiency. Using prostate cancer intensity modulated radiation therapy as a testbed, we first summarized a number of rules of operating our in-house TPS. In training, in addition to randomly navigating the state-action space, as in the DRL using the epsilon-greedy algorithm, we also sampled actions defined by the rules. The priority of sampling actions from rules decreased over the training process to encourage VTPN to explore new policy that was not covered by the rules. We trained a VTPN using KgDRL and compared its performance with another VTPN trained using DRL. Both VTPNs trained via KgDRL and DRL spontaneously learned to operate the TPS to generate high-quality plans, achieving plan quality scores of 8.82 and 8.43, respectively. Both VTPNs outperformed treatment planning purely based on the rules, which had a plan score of 7.81. VTPN trained with 8 episodes using KgDRL was able to perform similarly to that trained using DRL with 100 episodes. The training time was reduced from more than a week to 13 hours. The proposed KgDRL framework accelerated the training process by incorporating human knowledge, which will facilitate the development of VTPN for more complicated treatment planning scenarios.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
A deep learning-based framework for segmenting invisible clinical target volumes with estimated uncertainties for post-operative prostate cancer radiotherapy
Authors:
Anjali Balagopal,
Dan Nguyen,
Howard Morgan,
Yaochung Weng,
Michael Dohopolski,
Mu-Han Lin,
Azar Sadeghnejad Barkousaraie,
Yesenia Gonzalez,
Aurelie Garant,
Neil Desai,
Raquibul Hannan,
Steve Jiang
Abstract:
In post-operative radiotherapy for prostate cancer, the cancerous prostate gland has been surgically removed, so the clinical target volume (CTV) to be irradiated encompasses the microscopic spread of tumor cells, which cannot be visualized in typical clinical images such as computed tomography or magnetic resonance imaging. In current clinical practice, physicians segment CTVs manually based on t…
▽ More
In post-operative radiotherapy for prostate cancer, the cancerous prostate gland has been surgically removed, so the clinical target volume (CTV) to be irradiated encompasses the microscopic spread of tumor cells, which cannot be visualized in typical clinical images such as computed tomography or magnetic resonance imaging. In current clinical practice, physicians segment CTVs manually based on their relationship with nearby organs and other clinical information, per clinical guidelines. Automating post-operative prostate CTV segmentation with traditional image segmentation methods has been a major challenge. Here, we propose a deep learning model to overcome this problem by segmenting nearby organs first, then using their relationship with the CTV to assist CTV segmentation. The model proposed is trained using labels clinically approved and used for patient treatment, which are subject to relatively large inter-physician variations due to the absence of a visual ground truth. The model achieves an average Dice similarity coefficient (DSC) of 0.87 on a holdout dataset of 50 patients, much better than established methods, such as atlas-based methods (DSC<0.7). The uncertainties associated with automatically segmented CTV contours are also estimated to help physicians inspect and revise the contours, especially in areas with large inter-physician variations. We also use a 4-point grading system to show that the clinical quality of the automatically segmented CTV contours is equal to that of approved clinical contours manually drawn by physicians.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Chemically driven isothermal closed space vapor transport of MoO$_2$: thin films, flakes and in-situ tellurization
Authors:
O. de Melo,
L. García-Pelayo,
Y. González,
O. Concepción,
M. Manso-Silván,
R. López-Nebreda,
J. L. Pau,
J. C. González,
A. Climent-Font,
V. Torres-Costa
Abstract:
A novel procedure, based in a closed space vapor transport (CSVT) configuration, has been devised to grow films or flakes of pure MoO2 in a reductive atmosphere, at relatively low temperature and using MoO3 as the source. In contrast with conventional CSVT technique, in the proposed method a temperature gradient is not required for the growth to take place, which occurs through an intermediate vol…
▽ More
A novel procedure, based in a closed space vapor transport (CSVT) configuration, has been devised to grow films or flakes of pure MoO2 in a reductive atmosphere, at relatively low temperature and using MoO3 as the source. In contrast with conventional CSVT technique, in the proposed method a temperature gradient is not required for the growth to take place, which occurs through an intermediate volatile transport species that is produced in the complex reduction reaction of MoO3. An added value of this simple method is the possibility of transforming the MoO2 into MoTe2, one of the most interesting members of the transition metal dichalcogenide family. This is achieved in a sequential process that includes the growth of Mo oxide and its (in-situ) tellurization in two consecutive steps.
△ Less
Submitted 17 September, 2019;
originally announced September 2019.
-
Intelligent Inverse Treatment Planning via Deep Reinforcement Learning, a Proof-of-Principle Study in High Dose-rate Brachytherapy for Cervical Cancer
Authors:
Chenyang Shen,
Yesenia Gonzalez,
Peter Klages,
Nan Qin,
Hyunuk Jung,
Liyuan Chen,
Dan Nguyen,
Steve B. Jiang,
Xun Jia
Abstract:
Inverse treatment planning in radiation therapy is formulated as optimization problems. The objective function and constraints consist of multiple terms designed for different clinical and practical considerations. Weighting factors of these terms are needed to define the optimization problem. While a treatment planning system can solve the optimization problem with given weights, adjusting the we…
▽ More
Inverse treatment planning in radiation therapy is formulated as optimization problems. The objective function and constraints consist of multiple terms designed for different clinical and practical considerations. Weighting factors of these terms are needed to define the optimization problem. While a treatment planning system can solve the optimization problem with given weights, adjusting the weights for high plan quality is performed by human. The weight tuning task is labor intensive, time consuming, and it critically affects the final plan quality. An automatic weight-tuning approach is strongly desired. The weight tuning procedure is essentially a decision making problem. Motivated by the tremendous success in deep learning for decision making with human-level intelligence, we propose a novel framework to tune the weights in a human-like manner. Using treatment planning in high-dose-rate brachytherapy as an example, we develop a weight tuning policy network (WTPN) that observes dose volume histograms of a plan and outputs an action to adjust organ weights, similar to the behaviors of a human planner. We train the WTPN via end-to-end deep reinforcement learning. Experience replay is performed with the epsilon greedy algorithm. Then we apply the trained WTPN to guide treatment planning of testing patient cases. The trained WTPN successfully learns the treatment planning goals to guide the weight tuning process. On average, the quality score of plans generated under the WTPN's guidance is improved by ~8.5% compared to the initial plan with arbitrary weights, and by 10.7% compared to the plans generated by human planners. To our knowledge, this is the first tool to adjust weights for the treatment planning in a human-like fashion based on learnt intelligence. The study demonstrates potential feasibility to develop intelligent treatment planning system via deep reinforcement learning.
△ Less
Submitted 25 November, 2018;
originally announced November 2018.
-
$2\times2$ Hypergeometric operators with diagonal eigenvalues
Authors:
C. Calderón,
Y. González,
I. Pacharoni,
S. Simondi,
I. Zurrián
Abstract:
In this work we classify all the order-two Hypergeometric operators $D$, symmetric with respect to some $2\times 2$ irreducible matrix-weight $W$ such that $DP_n=P_n\left(\begin{smallmatrix} λ_n&0\\0&μ_n \end{smallmatrix} \right)$ with no repetition among the eigenvalues $\{λ_n,μ_n\}_{n\in\mathbb N_0}$, where $\{P_n\}_{n\in\mathbb N_0}$ is the (unique) sequence of monic orthogonal polynomials with…
▽ More
In this work we classify all the order-two Hypergeometric operators $D$, symmetric with respect to some $2\times 2$ irreducible matrix-weight $W$ such that $DP_n=P_n\left(\begin{smallmatrix} λ_n&0\\0&μ_n \end{smallmatrix} \right)$ with no repetition among the eigenvalues $\{λ_n,μ_n\}_{n\in\mathbb N_0}$, where $\{P_n\}_{n\in\mathbb N_0}$ is the (unique) sequence of monic orthogonal polynomials with respect to $W$.
We obtain, in a very explicit way, a three parameter family of such operators and weights. We also give the corresponding monic orthongonal polynomials, their three term recurrence relation and their squared matrix-norms.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Correlation of structural, nanomechanical and electrostatic properties of single and few-layers MoS2
Authors:
Benjamin J. Robinson,
Cristina E. Giusca,
Yurema Teijeiro Gonzalez,
Nicholas D. Kay,
Olga Kazakova,
Oleg V. Kolosov
Abstract:
We have decoupled the intrinsic optical and electrostatic effects arising in monolayer and few-layer molybdenum disulphide from those influenced by the flake-substrate interaction.
We have decoupled the intrinsic optical and electrostatic effects arising in monolayer and few-layer molybdenum disulphide from those influenced by the flake-substrate interaction.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Intelligent Parameter Tuning in Optimization-based Iterative CT Reconstruction via Deep Reinforcement Learning
Authors:
Chenyang Shen,
Yesenia Gonzalez,
Liyuan Chen,
Steve B. Jiang,
Xun Jia
Abstract:
A number of image-processing problems can be formulated as optimization problems. The objective function typically contains several terms specifically designed for different purposes. Parameters in front of these terms are used to control the relative weights among them. It is of critical importance to tune these parameters, as quality of the solution depends on their values. Tuning parameter is a…
▽ More
A number of image-processing problems can be formulated as optimization problems. The objective function typically contains several terms specifically designed for different purposes. Parameters in front of these terms are used to control the relative weights among them. It is of critical importance to tune these parameters, as quality of the solution depends on their values. Tuning parameter is a relatively straightforward task for a human, as one can intelligently determine the direction of parameter adjustment based on the solution quality. Yet manual parameter tuning is not only tedious in many cases, but becomes impractical when a number of parameters exist in a problem. Aiming at solving this problem, this paper proposes an approach that employs deep reinforcement learning to train a system that can automatically adjust parameters in a human-like manner. We demonstrate our idea in an example problem of optimization-based iterative CT reconstruction with a pixel-wise total-variation regularization term. We set up a parameter tuning policy network (PTPN), which maps an CT image patch to an output that specifies the direction and amplitude by which the parameter at the patch center is adjusted. We train the PTPN via an end-to-end reinforcement learning procedure. We demonstrate that under the guidance of the trained PTPN for parameter tuning at each pixel, reconstructed CT images attain quality similar or better than in those reconstructed with manually tuned parameters.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Dark Matter and Exotic Neutrino Interactions in Direct Detection Searches
Authors:
Enrico Bertuzzo,
Frank F. Deppisch,
Suchita Kulkarni,
Yuber F. Perez Gonzalez,
Renata Zukanovich Funchal
Abstract:
We investigate the effect of new physics interacting with both Dark Matter (DM) and neutrinos at DM direct detection experiments. Working within a simplified model formalism, we consider vector and scalar mediators to determine the scattering of DM as well as the modified scattering of solar neutrinos off nuclei. Using existing data from LUX as well as the expected sensitivity of LUX-ZEPLIN and DA…
▽ More
We investigate the effect of new physics interacting with both Dark Matter (DM) and neutrinos at DM direct detection experiments. Working within a simplified model formalism, we consider vector and scalar mediators to determine the scattering of DM as well as the modified scattering of solar neutrinos off nuclei. Using existing data from LUX as well as the expected sensitivity of LUX-ZEPLIN and DARWIN, we set limits on the couplings of the mediators to quarks, neutrinos and DM. Given the current limits, we also assess the true DM discovery potential of direct detection experiments under the presence of exotic neutrino interactions. In the case of a vector mediator, we show that the DM discovery reach of future experiments is affected for DM masses $m_χ\lesssim 10$ GeV or DM scattering cross sections $σ_χ\lesssim 10^{-47}$ cm$^2$. On the other hand, a scalar mediator will not affect the discovery reach appreciably.
△ Less
Submitted 5 February, 2024; v1 submitted 25 January, 2017;
originally announced January 2017.
-
Evidence for a Bose-Einstein condensate of excitons
Authors:
Mathieu Alloing,
Mussie Beian,
Maciej Lewenstein,
David Fuster,
Yolanda Gonzalez,
Luisa Gonzalez,
Roland Combescot,
Monique Combescot,
Francois Dubin
Abstract:
The demonstration of Bose-Einstein condensation in atomic gases at micro-Kelvin temperatures is a striking landmark while its evidence for semiconductor excitons still is a long-awaited milestone. This situation was not foreseen because excitons are light-mass boson-like particles with a condensation expected to occur around a few Kelvins. An explanation can be found in the underlying fermionic na…
▽ More
The demonstration of Bose-Einstein condensation in atomic gases at micro-Kelvin temperatures is a striking landmark while its evidence for semiconductor excitons still is a long-awaited milestone. This situation was not foreseen because excitons are light-mass boson-like particles with a condensation expected to occur around a few Kelvins. An explanation can be found in the underlying fermionic nature of excitons which rules their condensation. Precisely, it was recently predicted that, at accessible experimental conditions, the exciton condensate shall be "gray" with a dominant dark part coherently coupled to a weak bright component through fermion exchanges. This counter-intuitive quantum condensation, since excitons are mostly known for their optical activity, directly follows from the excitons internal structure which has an optically inactive, i.e., dark, ground state. Here, we report compelling evidence for such a "gray" condensate. We use an all-optical approach in order to produce microscopic traps which confine a dense exciton gas that yet exhibits an anomalously weak photo-emission at sub-Kelvin temperatures. This first fingerprint for a "gray" condensate is then confirmed by the macroscopic spatial coherence and the linear polarization of the weak excitonic photoluminescence emitted from the trap, as theoretically predicted.
△ Less
Submitted 18 July, 2014; v1 submitted 15 April, 2013;
originally announced April 2013.
-
Observation of macroscopic coherence in self-organized dipolar excitons
Authors:
M. Alloing,
D. Fuster,
Y. Gonzalez,
L. Gonzalez,
F. Dubin
Abstract:
We report experiments showing that spatially indirect excitons confined in a wide single quantum well can exhibit macroscopic spatial coherence. Extended coherence is spontaneously established in the regime where indirect excitons form a distinctive ring shaped pattern fragmented into microscopic beads. These contain a large concentration of indirect excitons at sub-Kelvin temperatures, the excito…
▽ More
We report experiments showing that spatially indirect excitons confined in a wide single quantum well can exhibit macroscopic spatial coherence. Extended coherence is spontaneously established in the regime where indirect excitons form a distinctive ring shaped pattern fragmented into microscopic beads. These contain a large concentration of indirect excitons at sub-Kelvin temperatures, the excitons spatial coherence being the greatest in the vicinity of the fragments.
△ Less
Submitted 11 October, 2012;
originally announced October 2012.
-
Strain driven migration of In during the growth of InAs/GaAs quantum posts
Authors:
D. Alonso-Álvarez,
B. Alén,
J. M. Ripalda,
A. Rivera,
A. G. Taboada,
J. M. Llorens,
Y. González,
L. González,
F. Briones
Abstract:
Using the mechano-optical stress sensor technique, we observe a counter-intuitive reduction of the compressive stress when InAs is deposited on GaAs (001) during growth of quantum posts. Through modelling of the strain fields, we find that such anomalous behaviour can be related to the strain-driven detachment of In atoms from the crystal and their surface diffusion towards the self-assembled nano…
▽ More
Using the mechano-optical stress sensor technique, we observe a counter-intuitive reduction of the compressive stress when InAs is deposited on GaAs (001) during growth of quantum posts. Through modelling of the strain fields, we find that such anomalous behaviour can be related to the strain-driven detachment of In atoms from the crystal and their surface diffusion towards the self-assembled nanostructures.
△ Less
Submitted 8 September, 2013; v1 submitted 8 August, 2011;
originally announced August 2011.
-
Charge control in laterally coupled double quantum dots
Authors:
G. Muñoz-Matutano,
M. Royo,
J. I. Climente,
J. Canet-Ferrer,
D. Fuster,
P. Alonso-González,
I. Fernández-Martínez,
J. Martínez-Pastor,
Y. González,
L. González,
F. Briones,
B. Alén
Abstract:
We investigate the electronic and optical properties of InAs double quantum dots grown on GaAs (001) and laterally aligned along the [110] crystal direction. The emission spectrum has been investigated as a function of a lateral electric field applied along the quantum dot pair mutual axis. The number of confined electrons can be controlled with the external bias leading to sharp energy shifts whi…
▽ More
We investigate the electronic and optical properties of InAs double quantum dots grown on GaAs (001) and laterally aligned along the [110] crystal direction. The emission spectrum has been investigated as a function of a lateral electric field applied along the quantum dot pair mutual axis. The number of confined electrons can be controlled with the external bias leading to sharp energy shifts which we use to identify the emission from neutral and charged exciton complexes. Quantum tunnelling of these electrons is proposed to explain the reversed ordering of the trion emission lines as compared to that of excitons in our system.
△ Less
Submitted 20 September, 2011; v1 submitted 26 April, 2011;
originally announced April 2011.
-
In-situ accumulated stress measurements: application to strain balanced quantum dots and quantum posts
Authors:
D. Alonso-Álvarez.,
B. Alén,
J. M. Ripalda,
A. Rivera,
A. G. Taboada,
J. M. Llorens,
Y. González,
L. González,
F. Briones
Abstract:
In this work we use the in-situ accumulated stress monitoring technique to evaluate the evolution of the stress during the strain balancing of InAs/GaAs quantum dots and quantum posts. The comparison of these results with simulations and other strain balanced criteria commonly used indicate that it is necessary to consider the kinematics of the process, not only the nominal values for the deposite…
▽ More
In this work we use the in-situ accumulated stress monitoring technique to evaluate the evolution of the stress during the strain balancing of InAs/GaAs quantum dots and quantum posts. The comparison of these results with simulations and other strain balanced criteria commonly used indicate that it is necessary to consider the kinematics of the process, not only the nominal values for the deposited materials. We find that the substrate temperature plays a major role on the compensation process and it is necessary to take it into account in order to achieve the optimum compensation conditions. The application of the technique to quantum posts has allowed us to fabricate nanostructures of exceptional length (120 nm). In situ accumulated measurements show that, even in shorter nanostrcutures, relaxation processes can be inhibited with the resulting increase in the material quality.
△ Less
Submitted 24 February, 2011;
originally announced February 2011.
-
Room temperature ferromagnetic-like behavior in Mn-implanted and post-annealed InAs layers deposited by Molecular Beam Epitaxy
Authors:
R. Gonzalez-Arrabal,
Y. Gonzalez,
L. Gonzalez,
M. Garcia-Hernandez,
F. Munnik,
M. S. Martin-Gonzalez
Abstract:
We report on the magnetic and structural properties of Ar and Mn implanted InAs epitaxial films grown on GaAs (100) by Molecular Beam Epitaxy (MBE) and the effect of Rapid Thermal Annealing (RTA) for 30 seconds at 750C. Channeling Particle Induced X- ray Emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are subsbtitutional in the In-site of the InAs lattice, like…
▽ More
We report on the magnetic and structural properties of Ar and Mn implanted InAs epitaxial films grown on GaAs (100) by Molecular Beam Epitaxy (MBE) and the effect of Rapid Thermal Annealing (RTA) for 30 seconds at 750C. Channeling Particle Induced X- ray Emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are subsbtitutional in the In-site of the InAs lattice, like in a diluted magnetic semiconductor (DMS). All of these samples show diamagnetic behavior. But, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments were performed with As as implantation ion all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagnetic-like behavior in the Mn-InAs-RTA layer is not related to lattice disorder produce during implantation, but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns (XRD) and Rutherford Back Scattering (RBS) measurements evidence the segregation of an oxygen deficient-MnO2 phase (nominally MnO1.94) in the Mn-InAs-RTA epitaxial layers which might be on the origin of room temperature ferromagnetic-like response observed.
△ Less
Submitted 14 April, 2009;
originally announced April 2009.
-
Electrical control of a laterally ordered InAs/InP quantum dash array
Authors:
B. Alen,
D. Fuster,
I. Fernandez-Martinez,
J. Martinez-Pastor,
Y. Gonzalez,
F. Briones,
L. Gonzalez
Abstract:
We have fabricated an array of closely spaced quantum dashes starting from a planar array of self-assembled semiconductor quantum wires. The array is embedded in a metallic nanogap which we investigate by micro-photoluminescence as a function of a lateral electric field. We demonstrate that the net electric charge and emission energy of individual quantum dashes can be modified externally with p…
▽ More
We have fabricated an array of closely spaced quantum dashes starting from a planar array of self-assembled semiconductor quantum wires. The array is embedded in a metallic nanogap which we investigate by micro-photoluminescence as a function of a lateral electric field. We demonstrate that the net electric charge and emission energy of individual quantum dashes can be modified externally with performance limited by the size inhomogeneity of the self-assembling process.
△ Less
Submitted 16 November, 2009; v1 submitted 4 March, 2008;
originally announced March 2008.
-
Exciton Gas Compression and Metallic Condensation in a Single Semiconductor Quantum Wire
Authors:
Benito Alen,
David Fuster,
Guillermo Munoz-Matutano,
Juan Martinez-Pastor,
Yolanda Gonzalez,
Luisa Gonzalez
Abstract:
We study the metal-insulator transition in individual self-assembled quantum wires and report optical evidences of metallic liquid condensation at low temperatures. Firstly, we observe that the temperature and power dependence of the single nanowire photoluminescence follow the evolution expected for an electron-hole liquid in one dimension. Secondly, we find novel spectral features that suggest…
▽ More
We study the metal-insulator transition in individual self-assembled quantum wires and report optical evidences of metallic liquid condensation at low temperatures. Firstly, we observe that the temperature and power dependence of the single nanowire photoluminescence follow the evolution expected for an electron-hole liquid in one dimension. Secondly, we find novel spectral features that suggest that in this situation the expanding liquid condensate compresses the exciton gas in real space. Finally, we estimate the critical density and critical temperature of the phase transition diagram at $n_c\sim1\times10^5$ cm$^{-1}$ and $T_c\sim35$ K, respectively.
△ Less
Submitted 12 August, 2008; v1 submitted 30 January, 2008;
originally announced January 2008.
-
Excitons in coupled InAs/InP self-assembled quantum wires
Authors:
Y. Sidor,
B. Partoens,
F. M. Peeters,
T. Ben,
A. Ponce,
D. L. Sales,
S. I. Molina,
D. Fuster,
L. Gonzalez,
Y. Gonzalez
Abstract:
Optical transitions in coupled InAs/InP self-assembled quantum wires are studied within the single-band effective mass approximation including effects due to strain. Both vertically and horizontally coupled quantum wires are investigated and the ground state, excited states and the photoluminescence peak energies are calculated. Where possible we compare with available photo-luminescence data fr…
▽ More
Optical transitions in coupled InAs/InP self-assembled quantum wires are studied within the single-band effective mass approximation including effects due to strain. Both vertically and horizontally coupled quantum wires are investigated and the ground state, excited states and the photoluminescence peak energies are calculated. Where possible we compare with available photo-luminescence data from which it was possible to determine the height of the quantum wires. An anti-crossing of the energy of excited states is found for vertically coupled wires signaling a change of symmetry of the exciton wavefunction. This crossing is the signature of two different coupling regimes.
△ Less
Submitted 8 February, 2007;
originally announced February 2007.
-
InAs/InP single quantum wire formation and emission at 1.5 microns
Authors:
B. Alén,
D. Fuster,
Y. González,
L. González,
J. Martínez-Pastor,
M. U. González,
J. M. García
Abstract:
Isolated InAs/InP self-assembled quantum wires have been grown using in situ accumulated stress measurements to adjust the optimal InAs thickness. Atomic force microscopy imaging shows highly asymmetric nanostructures with average length exceeding more than ten times their width. High resolution optical investigation of as-grown samples reveals strong photoluminescence from individual quantum wi…
▽ More
Isolated InAs/InP self-assembled quantum wires have been grown using in situ accumulated stress measurements to adjust the optimal InAs thickness. Atomic force microscopy imaging shows highly asymmetric nanostructures with average length exceeding more than ten times their width. High resolution optical investigation of as-grown samples reveals strong photoluminescence from individual quantum wires at 1.5 microns. Additional sharp features are related to monolayer fluctuations of the two dimensional InAs layer present during the early stages of the quantum wire self-assembling process.
△ Less
Submitted 5 October, 2006; v1 submitted 6 June, 2006;
originally announced June 2006.
