-
High power density energy harvesting devices based on the anomalous Nernst effect of Co/Pt magnetic multilayers
Authors:
Guillermo Lopez-Polin,
Hugo Aramberri,
Jorge Marques-Marchan,
Benjamin I. Weintrub,
Kirill I. Bolotin,
Jorge I. Cerda,
Agustina Asenjo
Abstract:
The anomalous Nernst effect (ANE) is a thermomagnetic phenomenon with potential applications in thermal energy harvesting. While many recent works studied the approaches to increase the ANE coefficient of materials, relatively little effort was devoted to increasing the power supplied by the effect. Here we demonstrate a nanofabricated device with record power density generated by the ANE. To acco…
▽ More
The anomalous Nernst effect (ANE) is a thermomagnetic phenomenon with potential applications in thermal energy harvesting. While many recent works studied the approaches to increase the ANE coefficient of materials, relatively little effort was devoted to increasing the power supplied by the effect. Here we demonstrate a nanofabricated device with record power density generated by the ANE. To accomplish this, we fabricate micrometer-sized devices in which the thermal gradient is three orders of magnitude higher than conventional macroscopic devices. In addition, we use Co/Pt multilayers, a system characterized by a high ANE thermopower (~1 microV/K), low electrical resistivity, and perpendicular magnetic anisotropy. These innovations allow us to obtain power densities of around 13 W/cm3. We believe that this design may find uses in harvesting wasted energy in e.g. electronic devices.
△ Less
Submitted 19 August, 2022; v1 submitted 15 July, 2022;
originally announced July 2022.
-
The effect of rippling on the mechanical properties of graphene
Authors:
Guillermo Lopez-Polin,
Cristina Gomez-Navarro,
Julio Gomez-Herrero
Abstract:
Graphene is the stiffest material known so far but, due to its one-atom thickness, it is also very bendable. Consequently, free-standing graphene exhibit ripples that has major effects on its elastic properties. Here we will summarize three experiments where the influence of rippling is essential to address the results. Firstly, we observed that atomic vacancies lessen the negative thermal expansi…
▽ More
Graphene is the stiffest material known so far but, due to its one-atom thickness, it is also very bendable. Consequently, free-standing graphene exhibit ripples that has major effects on its elastic properties. Here we will summarize three experiments where the influence of rippling is essential to address the results. Firstly, we observed that atomic vacancies lessen the negative thermal expansion coefficient of free-standing graphene. We also observed an increase of the Young's modulus with global applied strain and with the introduction of small density defects that we attributed to the decrease of rippling. Here, we will focus on a surprising feature observed in the data: the experiments consistently indicate that only the rippling with wavelengths between 5-10nm influences the mechanics of graphene. The rippling responsible of the negative TEC and anomalous elasticity is thought to be dynamic, i.e. flexural phonons. However, flexural phonons with these wavelengths should have minor effects on the mechanics of graphene, therefore other mechanisms must be considered to address our observations. We propose static ripples as one of the key elements to correctly understand the thermomechanics of graphene and suggest that rippling arises naturally due to a competition of symmetry breaking and anharmonic fluctuations.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Magnetization signature of topological surface states in a non-symmorphic superconductor
Authors:
Wenjun Kuang,
Guillermo Lopez-Polin,
Hyungjun Lee,
Francisco Guinea,
George Whitehead,
Ivan Timokhin,
Alexey I. Berdyugin,
Roshan Krishna Kumar,
Oleg Yazyev,
Niels Walet,
Alessandro Principi,
Andre K. Geim,
Irina V. Grigorieva
Abstract:
Superconductors with nontrivial band structure topology represent a class of materials with unconventional and potentially useful properties. Recent years have seen much success in creating artificial hybrid structures exhibiting main characteristics of two-dimensional (2D) topological superconductors. Yet, bulk materials known to combine inherent superconductivity with nontrivial topology remain…
▽ More
Superconductors with nontrivial band structure topology represent a class of materials with unconventional and potentially useful properties. Recent years have seen much success in creating artificial hybrid structures exhibiting main characteristics of two-dimensional (2D) topological superconductors. Yet, bulk materials known to combine inherent superconductivity with nontrivial topology remain scarce, largely because distinguishing their central characteristic -- topological surface states -- proved challenging due to a dominant contribution from the superconducting bulk. Reported here is a highly anomalous behaviour of surface superconductivity in topologically nontrivial 3D superconductor In2Bi where the surface states result from its nontrivial band structure, which itself is a consequence of the non-symmorphic crystal symmetry and strong spin-orbit coupling. In contrast to smoothly decreasing diamagnetic susceptibility above the bulk critical field Hc2, associated with surface superconductivity in conventional superconductors, we observe near-perfect, Meissner-like screening of low-frequency magnetic fields well above Hc2. The enhanced diamagnetism disappears at a new phase transition close to the critical field of surface superconductivity Hc3. Using theoretical modelling, we show that the anomalous screening is consistent with modification of surface superconductivity due to the presence of topological surface states. The demonstrated possibility to detect signatures of the surface states using macroscopic magnetization measurements provides an important new tool for discovery and identification of topological superconductors.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Proton and Li-Ion Permeation through Graphene with Eight-Atom-Ring Defects
Authors:
Eoin Griffin,
Lucas Mogg,
Guang-Ping Hao,
Gopinadhan Kalon,
Cihan Bacaksiz,
Guillermo Lopez-Polin,
T. Y. Zhou,
Victor Guarochico,
Junhao Cai,
Christof Neumann,
Andreas Winter,
Michael Mohn,
Jong Hak Lee,
Junhao Lin,
Ute Kaiser,
Irina V. Grigorieva,
Kazu Suenaga,
Barbaros Ozyilmaz,
Hui-Min Cheng,
Wencai Ren,
Andrey Turchanin,
Francois M. Peeters,
Andre K. Geim,
Marcelo Lozada-Hidalgo
Abstract:
Defect-free graphene is impermeable to gases and liquids but highly permeable to thermal protons. Atomic-scale defects such as vacancies, grain boundaries and Stone-Wales defects are predicted to enhance graphene's proton permeability and may even allow small ions through, whereas larger species such as gas molecules should remain blocked. These expectations have so far remained untested in experi…
▽ More
Defect-free graphene is impermeable to gases and liquids but highly permeable to thermal protons. Atomic-scale defects such as vacancies, grain boundaries and Stone-Wales defects are predicted to enhance graphene's proton permeability and may even allow small ions through, whereas larger species such as gas molecules should remain blocked. These expectations have so far remained untested in experiment. Here we show that atomically thin carbon films with a high density of atomic-scale defects continue blocking all molecular transport, but their proton permeability becomes ~1,000 times higher than that of defect-free graphene. Lithium ions can also permeate through such disordered graphene. The enhanced proton and ion permeability is attributed to a high density of 8-carbon-atom rings. The latter pose approximately twice lower energy barriers for incoming protons compared to the 6-atom rings of graphene and a relatively low barrier of ~0.6 eV for Li ions. Our findings suggest that disordered graphene could be of interest as membranes and protective barriers in various Li-ion and hydrogen technologies.
△ Less
Submitted 20 May, 2020; v1 submitted 19 May, 2020;
originally announced May 2020.
-
Neutral and charged excitons interplay in non-uniformly strain-engineered WS$_2$
Authors:
Sviatoslav Kovalchuk,
Moshe G. Harats,
Guillermo López-Polín,
Jan N. Kirchhof,
Katja Höflich,
Kirill I. Bolotin
Abstract:
We investigate the response of excitons in two-dimensional semiconductors subjected to controlled non-uniform strain fields. In our approach to non-uniform strain-engineering, a WS$_2$ monolayer is suspended over a triangular hole. Large ($>2\;\%$), strongly non-uniform ($>0.28\;\%/μm$), and in-situ tunable strain is induced in the monolayer by pressurizing it with inert gas. We observe peak shift…
▽ More
We investigate the response of excitons in two-dimensional semiconductors subjected to controlled non-uniform strain fields. In our approach to non-uniform strain-engineering, a WS$_2$ monolayer is suspended over a triangular hole. Large ($>2\;\%$), strongly non-uniform ($>0.28\;\%/μm$), and in-situ tunable strain is induced in the monolayer by pressurizing it with inert gas. We observe peak shifts and spectral shape changes in the photoluminescence spectra of strained WS$_2$. We interpret these changes as a signature of increased free electron density and resulting conversion of neutral excitons to trions in the region of high strain. Our result establishes non-uniform strain engineering as a novel and useful experimental `knob' for tuning optoelectronic properties of 2D semiconductors.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Improved graphene blisters by ultrahigh pressure sealing
Authors:
Y. Manzanares-Negro,
P. Ares,
M. Jaafar,
G. López-Polín,
C. Gómez-Navarro,
J. Gómez-Herrero
Abstract:
Graphene is a very attractive material for nanomechanical devices and membrane applications. Graphene blisters based on silicon oxide micro-cavities are a simple but relevant example of nanoactuators. A drawback of this experimental set up is that gas leakage through the graphene-SiO2 interface contributes significantly to the total leak rate. Here we study the diffusion of air from pressurized gr…
▽ More
Graphene is a very attractive material for nanomechanical devices and membrane applications. Graphene blisters based on silicon oxide micro-cavities are a simple but relevant example of nanoactuators. A drawback of this experimental set up is that gas leakage through the graphene-SiO2 interface contributes significantly to the total leak rate. Here we study the diffusion of air from pressurized graphene drumheads on SiO2 micro-cavities and propose a straightforward method to improve the already strong adhesion between graphene and the underlying SiO2 substrate, resulting in reduced leak rates. This is carried out by applying controlled and localized ultrahigh pressure (> 10 GPa) with an Atomic Force Microscopy diamond tip. With this procedure, we are able to significantly approach the graphene layer to the SiO2 surface around the drumheads, thus enhancing the interaction between them allowing us to better seal the graphene-SiO2 interface, which is reflected in up to ~ 4 times lower leakage rates. Our work opens an easy way to improve the performance of graphene as a gas membrane on a technological relevant substrate such as SiO2.
△ Less
Submitted 11 August, 2020; v1 submitted 11 September, 2018;
originally announced September 2018.
-
Tailoring the thermal expansion of graphene via controlled defect creation
Authors:
Guillermo López-Polín,
Maria Ortega,
J. G. Vilhena,
Irene Alda,
J. Gomez-Herrero,
Pedro A. Serena,
C. Gomez-Navarro,
Rubén Pérez
Abstract:
Contrary to most materials, graphene exhibits a negative thermal expansion coefficient (TEC), i.e it contracts when heated. This contraction is due to the thermal excitation of low energy out-of-plane vibration modes. These flexural modes have been reported to govern the electronic transport and the mechanical response of suspended graphene. In this work, we systematically investigate the influenc…
▽ More
Contrary to most materials, graphene exhibits a negative thermal expansion coefficient (TEC), i.e it contracts when heated. This contraction is due to the thermal excitation of low energy out-of-plane vibration modes. These flexural modes have been reported to govern the electronic transport and the mechanical response of suspended graphene. In this work, we systematically investigate the influence of defects in the TEC of suspended graphene membranes. Controlled introduction of low densities of mono-vacancies reduces the graphene TEC, up to one order of magnitude for a defect density of $5\times10^{12}$~cm$^{-2}$ . Our molecular dynamics simulations reproduce the observed trend and show that TEC reduction is due to the suppression of out-of-plane fluctuations caused by the strain fields created by mono-vacancies in their surrounding areas. These results highlight the key role of defects in the properties of "real-life" graphene, and pave the way for future proposals of electronic and mechanical defect engineering.
△ Less
Submitted 14 December, 2016;
originally announced December 2016.
-
Environmental Effects in Mechanical Properties of Few-layer Black Phosphorus
Authors:
Miriam Moreno-Moreno,
Guillermo Lopez-Polin,
Andres Castellanos-Gomez,
Cristina Gomez-Navarro,
Julio Gomez-Herrero
Abstract:
We report on the mechanical properties of few-layer black phosphorus (BP) nanosheets, in high vacuum and as a function of time of exposure to atmospheric conditions [1]. BP flakes with thicknesses ranging from 4 to 30 nm suspended over circular holes are characterized by nanoindentations using an atomic force microscope tip. From measurements in high vacuum an elastic modulus of 46+/-10 GPa and br…
▽ More
We report on the mechanical properties of few-layer black phosphorus (BP) nanosheets, in high vacuum and as a function of time of exposure to atmospheric conditions [1]. BP flakes with thicknesses ranging from 4 to 30 nm suspended over circular holes are characterized by nanoindentations using an atomic force microscope tip. From measurements in high vacuum an elastic modulus of 46+/-10 GPa and breaking strength of 2.4+/-1 GPa are estimated. Both magnitudes are independent of the thickness of the flakes. Our results show that the exposure to air has substantial influence in the mechanical response of flakes thinner than 6 nm but small effects on thicker flakes.
△ Less
Submitted 24 August, 2016;
originally announced August 2016.
-
Strain dependent elastic modulus of graphene
Authors:
Guillermo López-Polín,
Miriam Jaafar,
Francisco Guinea,
Rafael Roldán,
Cristina Gómez-Navarro,
Julio Gómez-Herrero
Abstract:
Indentation experiments on graphene membranes pre-stressed by hydrostatic pressure show an increase in effective elastic modulus from 300 N/m in non pressurized membranes to 700 N/m for pre-strains above 0.5 %. This pronounced dependence of the stiffness of graphene with strain is attributed to its high anharmonicity and the great influence of out of plane corrugations of this atomic thick membran…
▽ More
Indentation experiments on graphene membranes pre-stressed by hydrostatic pressure show an increase in effective elastic modulus from 300 N/m in non pressurized membranes to 700 N/m for pre-strains above 0.5 %. This pronounced dependence of the stiffness of graphene with strain is attributed to its high anharmonicity and the great influence of out of plane corrugations of this atomic thick membrane in its mechanical properties. Our experimental findings imply that graphene measured stiffness is highly influenced by the presence of corrugations and that the in plane elastic modulus corresponding to atomic bond stretching is more akin to 700 N/m, instead of the commonly accepted 340 N/m.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
Stiffening graphene by controlled defect creation
Authors:
Guillermo López-Polín,
Cristina Gómez-Navarro,
Vincenzo Parente,
Francisco Guinea,
Mikhail I. Katsnelson,
Francesc Pérez-Murano,
Julio Gómez-Herrero
Abstract:
Graphene extraordinary strength, stiffness and lightness have generated great expectations towards its application in flexible electronics and as mechanical reinforcement agent. However, the presence of lattice defects, unavoidable in sheets obtained by scalable routes, might degrade its mechanical properties. Here we report a systematic study on the elastic modulus and strength of graphene with c…
▽ More
Graphene extraordinary strength, stiffness and lightness have generated great expectations towards its application in flexible electronics and as mechanical reinforcement agent. However, the presence of lattice defects, unavoidable in sheets obtained by scalable routes, might degrade its mechanical properties. Here we report a systematic study on the elastic modulus and strength of graphene with controlled density of defects. Counter intuitively, the in-plane Young modulus increases with increasing defect density up to almost twice the initial value for vacancy content of ~0.2%, turning it into the stiffest material ever reported. For higher density of vacancies, elastic modulus decreases with defect inclusion. The initial increase in Young modulus is explained in terms of a dependence of the elastic coefficients with the momentum of flexural modes predicted for 2D membranes. In contrast, the fracture strength decreases with defect density according to standard fracture continuum models. These quantitative structure-property relationships, measured in atmospheric conditions, are of fundamental and technological relevance and provide guidance for applications in which graphene mechanics represents a disruptive improvement.
△ Less
Submitted 30 October, 2014; v1 submitted 9 June, 2014;
originally announced June 2014.
