-
Phase Errors in mid-IR Arrayed Waveguide Gratings based on graded index SiGe-Si technology
Authors:
Ainur Koshkinbayeva,
Regis Orobtchouk,
Pierre Labeye
Abstract:
In this paper, we present a method for analysis of phase errors and power truncation in SiGe/Si graded index arrayed waveguide gratings (AWGs) operating in mid-infrared spectral range. Semi-analytical model used herein is based on Gaussian approximation of the modal field and Fourier Optics. This method is applied to study the correlation between crosstalk level, effective index deviation in array…
▽ More
In this paper, we present a method for analysis of phase errors and power truncation in SiGe/Si graded index arrayed waveguide gratings (AWGs) operating in mid-infrared spectral range. Semi-analytical model used herein is based on Gaussian approximation of the modal field and Fourier Optics. This method is applied to study the correlation between crosstalk level, effective index deviation in array waveguides and power truncation in 3.4 micrometer, 4.5 micrometer, 5.7 micrometer and 7.6 micrometer central wavelength AWGs. We show that the impact of effective index variation is more critical for AWGs with smaller operational wavelengths and power truncation should not exceed 5% for these types of devices. In conclusion, we refer to experimental data of 4.5 μm, 5.7 μm and 7.6 μm central wavelength AWGs where a cross talk level of 24 dB is obtained, corresponding to relative errors of effective indices and equivalent path length deviations respectively lower than 2 10-5 and of 0.2 micrometer in 10 mm length of the devices.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Linear analytical approach to dispersive, external and intrinsic dissipative couplings in optomechanical systems
Authors:
Joris Baraillon,
Boris Taurel,
Pierre Labeye,
Laurent Duraffourg
Abstract:
We present a theoretical study of optomechanical systems in which the mechanical resonator modulates both the resonant frequency (dispersive coupling) and the decay rates (dissipative coupling) of the optical cavity. We extend the generic dispersive framework to a more general case in which the dissipative coupling is split between its external and intrinsic contribution. We report a complete anal…
▽ More
We present a theoretical study of optomechanical systems in which the mechanical resonator modulates both the resonant frequency (dispersive coupling) and the decay rates (dissipative coupling) of the optical cavity. We extend the generic dispersive framework to a more general case in which the dissipative coupling is split between its external and intrinsic contribution. We report a complete analysis of the influence of each kind of optical losses (intrinsic and external) on the three coupling mechanisms and highlight the interest of each external decay rate regime. The basic tools to experimentally identify the three couplings and their relative influence on the optical response are presented. We demonstrate the general expression of the optical spring effect and optomechanical damping. Comparison between experimental measurements in photonic crystal systems from the literature and our theoretical modal yields good agreement.
△ Less
Submitted 30 April, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
A new interferometer architecture combining nulling with phase closure measurements
Authors:
S. Lacour,
P. Tuthill,
J. D. Monnier,
T. Kotani,
L. Gauchet,
P. Labeye
Abstract:
Imaging the direct light signal from a faint exoplanet against the overwhelming glare of its host star presents one of the fundamental challenges to modern astronomical instrumentation. Achieving sufficient signal-to-noise for detection by direct imaging is limited by three basic physical processes: aberration of the wavefronts (both instrumental and atmospheric), photon noise, and detector noise.…
▽ More
Imaging the direct light signal from a faint exoplanet against the overwhelming glare of its host star presents one of the fundamental challenges to modern astronomical instrumentation. Achieving sufficient signal-to-noise for detection by direct imaging is limited by three basic physical processes: aberration of the wavefronts (both instrumental and atmospheric), photon noise, and detector noise. In this paper, we advance a novel optical setup which synthesizes the advantages of two different techniques: nulling interferometry to mitigate photon noise, and closure phase to combat optical aberrations. Our design, which employs technology from integrated optics and photonics, is intended to combine the advantageous aspects of both a coronagraph and a non-redundant interferometer inside a single optical device. We show that such an instrument would have a dynamic range limited either by i) the readout noise (if perfect co-phasing), or ii) the photon noise due to stellar flux leakage (in the case of imperfect nulling). This concept is optimal when the readout noise is not the main limitation, ie, for space interferometry or for ground based observations of bright stellar hosts (apparent magnitude brighter than 10).
△ Less
Submitted 6 February, 2014; v1 submitted 21 June, 2013;
originally announced June 2013.
-
PIONIER: a 4-telescope visitor instrument at VLTI
Authors:
Jean-Baptiste Le Bouquin,
J. -P. Berger,
B. Lazareff,
G. Zins,
P. Haguenauer,
L. Jocou,
P. Kern,
R. Millan-Gabet,
W. Traub,
O. Absil,
J. -C. Augereau,
M. Benisty,
N. Blind,
X. Bonfils,
P. Bourget,
A. Delboulbe,
P. Feautrier,
M. Germain,
P. Gitton,
D. Gillier,
M. Kiekebusch,
J. Kluska,
J. Knudstrup,
P. Labeye,
J. -L. Lizon
, et al. (21 additional authors not shown)
Abstract:
PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific ob…
▽ More
PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific observations since November 2010. In this paper, we detail the instrumental concept, we describe the standard operational modes and the data reduction strategy. We present the typical performance and discuss how to improve them. This paper is based on laboratory data obtained during the integrations at IPAG, as well as on-sky data gathered during the commissioning at VLTI. We illustrate the imaging capability of PIONIER on the binaries deltaSco and HIP11231. PIONIER provides 6 visibilities and 3 independent closure phases in the H band, either in a broadband mode or with a low spectral dispersion (R=40), using natural light (i.e. unpolarized). The limiting magnitude is Hmag=7 in dispersed mode under median atmospheric conditions (seeing<1", tau0>3ms) with the 1.8m Auxiliary Telescopes. We demonstrate a precision of 0.5deg on the closure phases. The precision on the calibrated visibilities ranges from 3 to 15% depending on the atmospheric conditions. PIONIER has been installed and successfully tested as a visitor instrument for the VLTI. It permits high angular resolution imaging studies at an unprecedented level of sensitivity. The successful combination of the four 8m Unit Telescopes in March 2011 demonstrates that VLTI is ready for 4-telescope operation.
△ Less
Submitted 9 September, 2011;
originally announced September 2011.
-
First astronomical unit scale image of the GW Ori triple. Direct detection of a new stellar companion
Authors:
J. -P. Berger,
J. D. Monnier,
R. Millan-Gabet,
S. Renard,
E. Pedretti,
W. Traub,
C. Bechet,
M. Benisty,
N. Carleton,
P. Haguenauer,
P. Kern,
P. Labeye,
F. Longa,
M. Lacasse,
F. Malbet,
K. Perraut,
S. Ragland,
P. Schloerb,
P. A. Schuller,
E. Thiébaut
Abstract:
Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is…
▽ More
Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is one such system. It is one of the brightest young T Tauri stars and is surrounded by a massive disk. Our goal is to probe the GW Orionis multiplicity at angular scales at which we can spatially resolve the orbit. We used the IOTA/IONIC3 interferometer to probe the environment of GW Orionis with an astronomical unit resolution in 2003, 2004, and 2005. By measuring squared visibilities and closure phases with a good UV coverage we carry out the first image reconstruction of GW Ori from infrared long-baseline interferometry. We obtain the first infrared image of a T Tauri multiple system with astronomical unit resolution. We show that GW Orionis is a triple system, resolve for the first time the previously known inner pair (separation $ρ\sim$1.4 AU) and reveal a new more distant component (GW Ori C) with a projected separation of $\sim$8 AU with direct evidence of motion. Furthermore, the nearly equal (2:1) H-band flux ratio of the inner components suggests that either GW Ori B is undergoing a preferential accretion event that increases its disk luminosity or that the estimate of the masses has to be revisited in favour of a more equal mass-ratio system that is seen at lower inclination. Accretion disk models of GW Ori will need to be completely reconsidered because of this outer companion C and the unexpected brightness of companion B.
△ Less
Submitted 20 March, 2011;
originally announced March 2011.
-
Integrated optics components for stellar interferometry
Authors:
Pierre Labeye
Abstract:
It has been recently demonstrated that integrated optics could enhance accuracy, stability, and ease of use of stellar interferometry techniques. The subject of this thesis is the study of an optical component based on singlemode waveguides for the coherent recombining of optical beams coming from four telescopes. Proposed architecture provides a simultaneous an instantaneous measurement of comp…
▽ More
It has been recently demonstrated that integrated optics could enhance accuracy, stability, and ease of use of stellar interferometry techniques. The subject of this thesis is the study of an optical component based on singlemode waveguides for the coherent recombining of optical beams coming from four telescopes. Proposed architecture provides a simultaneous an instantaneous measurement of complex visibility of interferometric signals of the six possible pairs of telescopes. The component is optimized for achromatic behaviour over the H spectral transparency band of atmosphere and integrates an original achromatic phase shifter in order to obtain four phase quadrature states of interferometric fringes. Optical characterisation results obtained on devices realized by deposition and etching of silica layers on silicon substrate confirm theoretical predictions et enabled the study of more complex components at the heart of second generation instrumentation projects of the VLTI (Very Large Telescope Interferometer) This study shows that proposed architecture can be extended to J and K spectral bands, can be applied for the recombination of beams coming from six and even eight telescopes and could also be applied to realise a fringe tracker.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.
-
An integrated optics beam combiner for the second generation VLTI instruments
Authors:
M. Benisty,
J-P. Berger,
L. Jocou,
P. Labeye,
F. Malbet,
K. Perraut,
P. Kern
Abstract:
The very recent years have seen a promising start in scientific publications making use of images produced by near-infrared long-baseline interferometry. The technique has reached, at last, a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. The Very Large Telescope Interferometer (VLTI) is on the path to be equ…
▽ More
The very recent years have seen a promising start in scientific publications making use of images produced by near-infrared long-baseline interferometry. The technique has reached, at last, a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. The Very Large Telescope Interferometer (VLTI) is on the path to be equipped with instruments capable to combine between four to six telescopes. In the framework of the VLTI second generation instruments Gravity and VSI, we propose a new beam combining concept using Integrated Optics (IO) technologies with a novel ABCD-like fringe encoding scheme. Our goal is to demonstrate that IO-based combination brings considerable advantages in terms of instrumental design and performance. We therefore aim at giving a full characterization of an IO beam combiner to establish its performances and check its compliance with the specifications of an imaging instrument. Laboratory measurements were made in the H band with a dedicated testbed. We studied the beam combiners through the analysis of throughput, instrumental visibilities, phases and closure phases in wide band as well as with spectral dispersion. Study of the polarization properties is also done. We obtain competitive throughput, high and stable instrumental contrasts, stable but non-zero closure phases which we attribute to internal well calibrable optical path differences. We validate a new static and achromatic phase shifting IO function close to the nominal 90deg value. All these observables show limited chromaticity over the H band range. Our results demonstrate that such ABCD-like beam combiners are particularly well suited to achieve aperture synthesis imaging. This opens the way to extend to all near infrared wavelengths and in particular, the K band.
△ Less
Submitted 2 March, 2009; v1 submitted 14 February, 2009;
originally announced February 2009.
-
Characterization of integrated optics components for the second generation of VLTI instruments
Authors:
S. Lacour,
L. Jocou,
T. Moulin,
P. R. Labeye,
M. Benisty,
J. -P. Berger,
A. Delboulbe,
X. Haubois,
E. Herwats,
P. Y. Kern,
F. Malbet,
K. Rousselet-Perraut,
G. Perrin
Abstract:
Two of the three instruments proposed to ESO for the second generation instrumentation of the VLTI would use integrated optics for beam combination. Several design are studied, including co-axial and multi-axial recombination. An extensive quantity of combiners are therefore under test in our laboratories. We will present the various components, and the method used to validate and compare the di…
▽ More
Two of the three instruments proposed to ESO for the second generation instrumentation of the VLTI would use integrated optics for beam combination. Several design are studied, including co-axial and multi-axial recombination. An extensive quantity of combiners are therefore under test in our laboratories. We will present the various components, and the method used to validate and compare the different combiners. Finally, we will discuss the performances and their implication for both VSI and Gravity VLTI instruments.
△ Less
Submitted 10 August, 2008;
originally announced August 2008.
-
System overview of the VLTI Spectro-Imager
Authors:
L. Jocou,
J. P. Berger,
F. Malbet,
P. Kern,
U. Beckmann,
D. Lorenzetti,
L. Corcione,
G. Li Causi,
D. Buscher,
J. Young,
M. Gai,
G. Weigelt,
G. Zins,
G. Duvert,
K. Perraut,
P. Labeye,
O. Absil,
P. Garcia,
D. Loreggia,
J. Lima,
J. Rebordao,
S. Ligori,
A. Amorim,
P. Rabou,
J. B. Le Bouquin
, et al. (8 additional authors not shown)
Abstract:
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolutio…
▽ More
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.
△ Less
Submitted 22 July, 2008;
originally announced July 2008.
-
VSI: the VLTI spectro-imager
Authors:
F. Malbet,
D. Buscher,
G. Weigelt,
P. Garcia,
M. Gai,
D. Lorenzetti,
J. Surdej,
J. Hron,
R. Neuhaeuser,
P. Kern,
L. Jocou,
J. -P. Berger,
O. Absil,
U. Beckmann,
L. Corcione,
G. Duvert,
M. Filho,
P. Labeye,
E. Le Coarer,
G. Li Causi,
J. Lima,
K. Perraut,
E. Tatulli,
E. Thiebaut,
J. Young
, et al. (29 additional authors not shown)
Abstract:
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combinat…
▽ More
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.
△ Less
Submitted 7 July, 2008;
originally announced July 2008.
-
Milli-arcsecond astrophysics with VSI, the VLTI spectro-imager in the ELT era
Authors:
F. Malbet,
D. Buscher,
G. Weigelt,
P. Garcia,
M. Gai,
D. Lorenzetti,
J. Surdej,
J. Hron,
R. Neuhäuser,
P. Kern,
L. Jocou,
J. -P. Berger,
O. Absil,
U. Beckmann,
L. Corcione,
G. Duvert,
M. Filho,
P. Labeye,
E. Le Coarer,
G. Li Causi,
J. Lima,
K. Perraut,
E. Tatulli,
E. Thiébaut,
J. Young
, et al. (27 additional authors not shown)
Abstract:
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and sp…
▽ More
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.
△ Less
Submitted 17 January, 2008;
originally announced January 2008.
-
Transmission behaviors of single mode hollow metallic waveguides dedicated to mid-infrared nulling interferometry
Authors:
Laetitia Abel-Tiberini,
Lucas Labadie,
Brahim Arezki,
Pierre Kern,
Romain Grille,
Pierre Labeye,
Jean-Emmanuel Broquin
Abstract:
This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect abs…
▽ More
This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect absorption in addition to the roughness of the waveguide metallic walls. The input and output coupling efficiency of our samples has been improved by adding tapers to minimize the impedance mismatch. A proper distinction between propagation losses and coupling losses is presented. Despite their elevate propagation losses, HMW show excellent spatial filtering capabilities in a spectral range where photonics technologies are only emerging.
△ Less
Submitted 15 January, 2008;
originally announced January 2008.
-
Technology challenges for space interferometry: the option of mid-infrared integrated optics
Authors:
L. Labadie,
P. Kern,
P. Labeye,
E. Le Coarer,
C. Vigreux-Bercovici,
A. Pradel,
J. -E. Broquin,
V. Kirschner
Abstract:
Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these mis…
▽ More
Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these missions, the question of the beam combination and wavefront filtering has an important place. A single-mode integrated optics (IO) beam combiner could support both the functions of filtering and the interferometric combination, simplifying the instrumental design. Such a perspective has been explored in this work within the project Integrated Optics for Darwin (IODA), which aims at developing a first IO combiner in the mid-infrared. The solutions reviewed here to manufacture the combiner are based on infrared dielectric materials on one side, and on metallic conductive waveguides on the other side. With this work, additional inputs are offered to pursue the investigation on mid-infrared photonics devices.
△ Less
Submitted 11 July, 2007;
originally announced July 2007.
-
Mid-infrared laser light nulling experiment using single-mode conductive waveguides
Authors:
L. Labadie,
E. Le Coarer,
R. Maurand,
P. Labeye,
P. Kern,
B. Arezki,
J. -E. Broquin
Abstract:
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift u…
▽ More
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift using a translating mirror, dynamic and static measurements of the nulling ratio are performed in the two cases where modal filtering is implemented and suppressed. No additional active control of the wavefront errors is involved. Results: We achieve on average a statistical nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null of 5.6e-5 is obtained in static mode. At the moment, the impact of external vibrations limits our ability to maintain the null to 10 to 20 seconds.; Conclusions: A positive effect of SM conductive waveguide on modal filtering has been observed in this study. Further improvement of the null should be possible with proper mechanical isolation of the setup.
△ Less
Submitted 1 May, 2007;
originally announced May 2007.
-
VSI: a milli-arcsec spectro-imager for the VLTI
Authors:
Fabien Malbet,
Pierre Kern,
Jean-Philippe Berger,
Laurent Jocou,
Paulo Garcia,
David Buscher,
Karine Rousselet-Perraut,
Gerd Weigelt,
Mario Gai,
Jean Surdej,
Josef Hron,
Ralph Neuhäuser,
Etienne Le Coarer,
Pierre Labeye,
Jean-Baptiste Le Bouquin,
Myriam Benisty,
Emilie Herwats
Abstract:
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to…
▽ More
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A.
△ Less
Submitted 13 July, 2006;
originally announced July 2006.
-
First Surface-resolved Results with the IOTA Imaging Interferometer: Detection of Asymmetries in AGB stars
Authors:
S. Ragland,
W. A. Traub,
J. -P. Berger,
W. C. Danchi,
J. D. Monnier,
L. A. Willson,
N. P. Carleton,
M. G. Lacasse,
R. Millan-Gabet,
E. Pedretti,
F. P. Schloerb,
W. D. Cotton,
C. H. Townes,
M. Brewer,
P. Haguenauer,
P. Kern,
P. Labeye,
F. Malbet,
D. Malin,
M. Pearlman,
K. Perraut,
K. Souccar,
G. Wallace
Abstract:
We have measured non-zero closure phases for about 29% of our sample of 56 nearby Asymptotic Giant Branch (AGB) stars, using the 3-telescope Infrared Optical Telescope Array (IOTA) interferometer at near-infrared wavelengths (H band) and with angular resolutions in the range 5-10 milliarcseconds. These nonzero closure phases can only be generated by asymmetric brightness distributions of the tar…
▽ More
We have measured non-zero closure phases for about 29% of our sample of 56 nearby Asymptotic Giant Branch (AGB) stars, using the 3-telescope Infrared Optical Telescope Array (IOTA) interferometer at near-infrared wavelengths (H band) and with angular resolutions in the range 5-10 milliarcseconds. These nonzero closure phases can only be generated by asymmetric brightness distributions of the target stars or their surroundings. We discuss how these results were obtained, and how they might be interpreted in terms of structures on or near the target stars. We also report measured angular sizes and hypothesize that most Mira stars would show detectable asymmetry if observed with adequate angular resolution.
△ Less
Submitted 7 July, 2006;
originally announced July 2006.
-
Bright Localized Near-Infrared Emission at 1-4 AU in the AB Aurigae Disk Revealed by IOTA Closure Phases
Authors:
R. Millan-Gabet,
J. D. Monnier,
J. -P. Berger,
W. A. Traub,
F. P. Schloerb,
E. Pedretti,
M. Benisty,
N. P. Carleton,
P. Haguenauer,
P. Kern,
P. Labeye,
M. G. Lacasse,
F. Malbet,
K. Perraut,
M. Pearlman,
N. Thureau
Abstract:
We report on the detection of localized off-center emission at 1-4 AU in the circumstellar environment of the young stellar object AB Aurigae. We used closure phase measurements in the near-infrared made at the long baseline interferometer IOTA, the first obtained on a young stellar object using this technique. When probing sub-AU scales, all closure phases are close to zero degrees, as expected…
▽ More
We report on the detection of localized off-center emission at 1-4 AU in the circumstellar environment of the young stellar object AB Aurigae. We used closure phase measurements in the near-infrared made at the long baseline interferometer IOTA, the first obtained on a young stellar object using this technique. When probing sub-AU scales, all closure phases are close to zero degrees, as expected given the previously-determined size of the AB Aurigae inner dust disk. However, a clear closure phase signal of -3.5 +/- 0.5 degrees is detected on one triangle containing relatively short baselines, requiring a high degree of non-point symmetry from emission at larger (AU-sized) scales in the disk. We have not identified any alternative explanation for these closure phase results and demonstrate that a ``disk hot spot'' model can fit our data. We speculate that such asymmetric near-infrared emission detected might arise as a result of localized viscous heating due to a gravitational instability in the AB Aurigae disk, or to the presence of a close stellar companion or accreting sub-stellar object.
△ Less
Submitted 2 June, 2006;
originally announced June 2006.
-
Few Skewed Disks Found in First Closure-Phase Survey of Herbig Ae/Be stars
Authors:
J. D. Monnier,
J. -P. Berger,
R. Millan-Gabet,
W. Traub,
F. P. Schloerb,
E. Pedretti,
M. Benisty,
N. P. Carleton,
P. Haguenauer,
P. Kern,
P. Labeye,
M. G. Lacasse,
F. Malbet,
K. Perraut,
M. Pearlman,
M. Zhao
Abstract:
Using the 3-telescope IOTA interferometer on Mt. Hopkins, we report results from the first near-infrared (lambda=1.65 mu) closure-phase survey of Young Stellar Objects (YSOs). These closure phases allow us to unambiguously detect departures from centrosymmetry (i.e., skew) in the emission pattern from YSO disks on the scale of ~4 milliarcseconds, expected from generic ``flared disk'' models. Six…
▽ More
Using the 3-telescope IOTA interferometer on Mt. Hopkins, we report results from the first near-infrared (lambda=1.65 mu) closure-phase survey of Young Stellar Objects (YSOs). These closure phases allow us to unambiguously detect departures from centrosymmetry (i.e., skew) in the emission pattern from YSO disks on the scale of ~4 milliarcseconds, expected from generic ``flared disk'' models. Six of fourteen targets showed small, yet statistically-significant, non-zero closure phases, with largest values from the young binary system MWC 361-A and the (pre-main sequence?) Be star HD 45677. Our observations are quite sensitive to the vertical structure of the inner disk and we confront the predictions of the ``puffed-up inner wall'' models of Dullemond, Dominik, and Natta (DDN). Our data support disks models with curved inner rims because the expected emission appear symmetrically-distributed around the star over a wide range of inclination angles. In contrast, our results are incompatible with the models possessing vertical inner walls because they predict extreme skewness (i.e., large closure phases) from the near-IR disk emission that is not seen in our data. In addition, we also present the discovery of mysterious H-band ``halos'' (~5-10% of light on scales 0.01-0.50 arcsec) around a few objects, a preliminary ``parametric imaging'' study for HD 45677, and the first astrometric orbit for the young binary MWC 361-A.
△ Less
Submitted 2 June, 2006;
originally announced June 2006.
-
Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band
Authors:
Jean-Baptiste Le Bouquin,
Pierre Labeye,
Fabien Malbet,
Laurent Jocou,
Fatemeh Zabihian,
Karine Rousselet-Perraut,
Jean-Philippe Berger,
Alain Delboulbe,
Pierre Kern,
Andreas Glindemann,
Markus Schoeller
Abstract:
Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device a…
▽ More
Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects.
△ Less
Submitted 21 December, 2005;
originally announced December 2005.
-
Modal Filtering for Nulling Interferometry-First Single-Mode Conductive Waveguides in the Mid-Infrared
Authors:
L. Labadie,
P. Labeye,
P. Kern,
I. Schanen,
B. Arezki,
J. -E. Broquin
Abstract:
This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented he…
▽ More
This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented here are manufactured using micro-machining techniques. Single-mode behavior has been investigated in laboratory through a technique of polarization analysis while transmission features have been measured using flux relative comparison. The single-mode behavior have been assessed at lambda=10.6 um for rectangular waveguides with dimensions a=10 um and b<5.3 um with an accuracy of ~2.5 %. The tests have shown that a single-polarization state can be maintained in the waveguide. A comparison with results on multi-mode HMW is proposed. Excess losses of 2.4 dB (~ 58 % transmission) have been measured for a single-mode waveguide. In particular, the importance of coupling conditions into the waveguide is emphasized here. The goal of manufacturing and characterizing the first single-mode HMW for the mid-infrared has been achieved. This opens the road to the use of integrated optics for interferometry in the mentioned spectral range.
△ Less
Submitted 10 November, 2005;
originally announced November 2005.
-
VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution
Authors:
Fabien Malbet,
Jean-Philippe Berger,
Paulo Garcia,
Pierre Kern,
Karine Perraut,
Myriam Benisty,
Laurent Jocou,
Emilie Herwats,
Jean-Baptiste Lebouquin,
Pierre Labeye,
Etienne Le Coarer,
Olivier Preis,
Eric Tatulli,
Eric Thiébaut
Abstract:
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide inter…
▽ More
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.
△ Less
Submitted 10 July, 2005;
originally announced July 2005.
-
Infrared Imaging of Capella with the IOTA Closure Phase Interferometer
Authors:
S. Kraus,
F. P. Schloerb,
W. A. Traub,
N. P. Carleton,
M. Lacasse,
M. Pearlman,
J. D. Monnier,
R. Millan-Gabet,
J. -P. Berger,
P. Haguenauer,
K. Perraut,
P. Kern,
F. Malbet,
P. Labeye
Abstract:
We present infrared aperture synthesis maps produced with the upgraded IOTA interferometer. Michelson interferograms on the close binary system Capella (Alpha Aur) were obtained in the H-band between 2002 November 12 and 16 using the IONIC3 beam combiner. With baselines of 15m < B < 38m, we were able to determine the relative position of the binary components with milliarcsecond (mas) precision…
▽ More
We present infrared aperture synthesis maps produced with the upgraded IOTA interferometer. Michelson interferograms on the close binary system Capella (Alpha Aur) were obtained in the H-band between 2002 November 12 and 16 using the IONIC3 beam combiner. With baselines of 15m < B < 38m, we were able to determine the relative position of the binary components with milliarcsecond (mas) precision and to track their movement along the approx. 14 degree arc covered by our observation run. We briefly describe the algorithms used for visibility and closure phase estimation. Three different Hybrid Mapping and Bispectrum Fitting techniques were implemented within one software framework and used to reconstruct the source brightness distribution. By dividing our data into subsets, the system could be mapped at three epochs, revealing the motion of the stars. The precise position of the binary components was also determined with model fits, which in addition revealed I_Aa/I_Ab=1.49 +/- 0.10 and apparent stellar uniform-disk (UD) diameters of Theta_Aa=8.9 +/- 0.6 mas and Theta_Ab=5.8 +/- 0.8 mas.
To improve the u, v-plane coverage, we compensated this orbital motion by applying a rotation-compensating coordinate transformation. The resulting model-independent map with a beam size of 5.4 x 2.6 mas allows the resolution of the stellar surfaces of the Capella giants themselves.
△ Less
Submitted 21 April, 2005;
originally announced April 2005.
-
First results with the IOTA3 imaging interferometer: The spectroscopic binaries lambda Vir and WR 140
Authors:
J. D. Monnier,
W. Traub,
F. P. Schloerb,
R. Millan-Gabet,
J. -P. Berger,
E. Pedretti,
N. Carleton,
S. Kraus,
M. Lacasse,
M. Brewer,
S. Ragland,
A. Ahearn,
C. Coldwell,
P. Haguenauer,
P. Kern,
P. Labeye,
L. Lagny,
F. Malbet,
D. Malin,
P. Maymounkov,
S. Morel,
C. Papaliolios,
K. Perraut,
M. Pearlman,
I. Porro
, et al. (4 additional authors not shown)
Abstract:
We report the first spatially-resolved observations of the spectroscopic binaries lambda Vir and WR 140, which includes the debut of aperture-synthesis imaging with the upgraded three-telescope IOTA interferometer. Using IONIC-3, a new integrated optics beam combiner capable of precise closure phase measurement, short observations were sufficient to extract the angular separation and orientation…
▽ More
We report the first spatially-resolved observations of the spectroscopic binaries lambda Vir and WR 140, which includes the debut of aperture-synthesis imaging with the upgraded three-telescope IOTA interferometer. Using IONIC-3, a new integrated optics beam combiner capable of precise closure phase measurement, short observations were sufficient to extract the angular separation and orientation of each binary system and the component brightness ratio. Most notably, the underlying binary in the prototypical colliding-wind source WR 140 (WC7 + O4/5) was found to have a separation of ~13 milli-arcseconds with a position angle consistent with the images of the 2001 dust shell ejection only if the Wolf-Rayet star is fainter than the O star at 1.65 microns. We also highlight lambda Vir whose peculiar stellar properties of the Am star components will permit direct testing of current theories of tidal evolution when the full orbit is determined.
△ Less
Submitted 19 January, 2004; v1 submitted 14 January, 2004;
originally announced January 2004.
