-
Bessel beam fabrication of graphitic micro electrodes in diamond using laser bursts
Authors:
Akhil Kuriakose,
Francesco P. Mezzapesa,
Caterina Gaudiuso,
Andrea Chiappini,
Federico Picollo,
Antonio Ancona,
Ottavia Jedrkiewicz
Abstract:
We present the fabrication of conductive graphitic microelectrodes in diamond by using pulsed Bessel beams in the burst mode laser writing regime. The graphitic wires are created in the bulk of a 500 μm thick monocrystalline HPHT diamond (with (100) orientation) perpendicular to the sample surface, without beam scanning or sample translation. In particular, the role of different burst features in…
▽ More
We present the fabrication of conductive graphitic microelectrodes in diamond by using pulsed Bessel beams in the burst mode laser writing regime. The graphitic wires are created in the bulk of a 500 μm thick monocrystalline HPHT diamond (with (100) orientation) perpendicular to the sample surface, without beam scanning or sample translation. In particular, the role of different burst features in the resistivity of such electrodes is investigated for two very different sub-pulse durations namely 200 fs and 10 ps, together with the role of thermal annealing. Micro-Raman spectroscopy is implemented to investigate the laser-induced crystalline modification, and the results obtained by using two different laser repetition rates, namely 20 Hz and 200 kHz, are compared. A comparison of the micro-Raman spectra and of the resistivity of the electrodes fabricated respectively with 10 ps single pulses and with bursts (of sub-pulses) of similar total duration has also been made, and we show that the burst mode writing regime allows to fabricate more conductive micro electrodes, thanks to the heat accumulation process leading to stronger graphitization. Moreover, the microfabrication of diamond by means of the longest available bursts (~ 46.7 ps duration) featured by 32 sub-pulses of 200 fs duration, with intra-burst time delay of 1.5 ps (sub-THz bursts), leads to graphitic wires with the lowest resistivity values obtained in this work, especially at low repetition rate such as 20 Hz. Indeed, micro electrodes with resistivity on the order of 0.01 Ω cm can be fabricated by Bessel beams in the burst mode regime even when the bursts are constituted by femtosecond laser sub-pulses, in contrast with the results of the standard writing regime with single fs pulses typically leading to less conductive micro electrodes.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Chip-scale terahertz frequency combs through integrated intersubband polariton bleaching
Authors:
Francesco P. Mezzapesa,
Leonardo Viti,
Lianhe Li,
Valentino Pistore,
Sukhdeep Dhillon,
A. Giles Davies,
Edmund Linfield,
Miriam S. Vitiello
Abstract:
Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. Their large spectral bandwidth, high output powers and quantum-limited linewidths have facilitated the realization of THz pulses by active mode-locking and passive generation of…
▽ More
Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. Their large spectral bandwidth, high output powers and quantum-limited linewidths have facilitated the realization of THz pulses by active mode-locking and passive generation of optical frequency combs (FCs) through intracavity four-wave-mixing, albeit over a restricted operational regime. Here, we conceive an integrated architecture for the generation of high power (10 mW) THz FCs comprising an ultrafast THz polaritonic reflector, exploiting intersubband cavity polaritons, and a broad bandwidth (2.3-3.8 THz) heterogeneous THz QCL. Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. By tuning the group delay dispersion in an integrated geometry, through the exploitation of light induced bleaching of the intersubband-based THz polaritons, we demonstrate spectral reshaping of the QCL emission and stable FC operation over an operational dynamic range of up to 38%, characterized by a single and narrow (down to 700 Hz) intermode beatnote. Our concept provides design guidelines for a new generation of compact, cost-effective, electrically driven chip-scale FC sources based on ultrafast polariton dynamics, paving the way towards the generation of mode locked THz micro-lasers that will strongly impact a broad range of applications in ultrafast sciences, data storage, high-speed communication and spectroscopy.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
Terahertz frequency combs exploiting an on-chip solution processed graphene-quantum cascade laser coupled-cavity architecture
Authors:
F. P. Mezzapesa,
K. Garrasi,
J. Schmidt,
L. Salemi,
V. Pistore,
L. Li,
A. G. Davies,
E. H. Linfield,
M. Riesch,
C. Jirauschek,
T. Carey,
F. Torrisi,
A. C. Ferrari,
M. S. Vitiello
Abstract:
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersu…
▽ More
The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized THz FCSs comprising a heterogeneous THz QCL integrated with a tightly-coupled on-chip solution-processed graphene saturable-absorber reflector that preserves phase-coherence between lasing modes even when four-wave mixing no longer provides dispersion compensation. This enables a high-power (8 mW) FCS with over 90 optical modes to be demonstrated, over more than 55% of the laser operational range. Furthermore, stable injection-locking is showed, paving the way to impact a number of key applications, including high-precision tuneable broadband-spectroscopy and quantum-metrology.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Quantum Cascade Laser Based Hybrid Dual Comb Spectrometer
Authors:
Luigi Consolino,
Malik Nafa,
Michele De Regis,
Francesco Cappelli,
Katia Garrasi,
Francesco P. Mezzapesa,
Lianhe Li,
A. Giles Davies,
Edmund H. Linfield,
Miriam S. Vitiello,
Saverio Bartalini,
Paolo De Natale
Abstract:
Four-wave-mixing-based quantum cascade laser frequency combs (QCL-FC) are a powerful photonic tool, driving a recent revolution in major molecular fingerprint regions, i.e. mid- and far-infrared domains. Their compact and frequency-agile design, together with their high optical power and spectral purity, promise to deliver an all-in-one source for the most challenging spectroscopic applications. H…
▽ More
Four-wave-mixing-based quantum cascade laser frequency combs (QCL-FC) are a powerful photonic tool, driving a recent revolution in major molecular fingerprint regions, i.e. mid- and far-infrared domains. Their compact and frequency-agile design, together with their high optical power and spectral purity, promise to deliver an all-in-one source for the most challenging spectroscopic applications. Here, we demonstrate a metrological-grade hybrid dual comb spectrometer, combining the advantages of a THz QCL-FC with the accuracy and absolute frequency referencing provided by a free-standing, optically-rectified THz frequency comb. A proof-of-principle application to methanol molecular transitions is presented. The multi-heterodyne molecular spectra retrieved provide state-of-the-art results in line-center determination, achieving the same precision as currently available molecular databases. The devised setup provides a solid platform for a new generation of THz spectrometers, paving the way to more refined and sophisticated systems exploiting full phase control of QCL-FCs, or Doppler-free spectroscopic schemes.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
Fully phase-stabilized quantum cascade laser frequency comb
Authors:
Luigi Consolino,
Malik Nafa,
Francesco Cappelli,
Katia Garrasi,
Francesco P. Mezzapesa,
Lianhe Li,
A. Giles Davies,
Edmund H. Linfield,
Miriam S. Vitiello,
Paolo De Natale,
Saverio Bartalini
Abstract:
Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency separation between adjacent modes and the carrier offset frequency. Providing a phase-coherent link between the optical and the microwave/radio-frequency region…
▽ More
Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency separation between adjacent modes and the carrier offset frequency. Providing a phase-coherent link between the optical and the microwave/radio-frequency regions [2], FCs have become groundbreaking tools for precision measurements[3,4].
Despite these inherent advantages, developing miniaturized comb sources across the whole infrared (IR), with an independent and simultaneous control of the two comb degrees of freedom at a metrological level, has not been possible, so far. Recently, promising results have been obtained with compact sources, namely diode-laser-pumped microresonators [5,6] and quantum cascade lasers (QCL-combs) [7,8]. While both these sources rely on four-wave mixing (FWM) to generate comb frequency patterns, QCL-combs benefit from a mm-scale miniaturized footprint, combined with an ad-hoc tailoring of the spectral emission in the 3-250 μm range, by quantum engineering [9].
Here, we demonstrate full stabilization and control of the two key parameters of a QCL-comb against the primary frequency standard. Our technique, here applied to a far-IR emitter and open ended to other spectral windows, enables Hz-level narrowing of the individual comb modes, and metrological-grade tuning of their individual frequencies, which are simultaneously measured with an accuracy of 2x10^-12, limited by the frequency reference used. These fully-controlled, frequency-scalable, ultra-compact comb emitters promise to pervade an increasing number of mid- and far-IR applications, including quantum technologies, due to the quantum nature of the gain media [10].
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
High dynamic range, heterogeneous, terahertz quantum cascade lasers featuring thermally-tunable frequency comb operation over a broad current range
Authors:
Katia Garrasi,
Francesco P. Mezzapesa,
Luca Salemi,
Lianhe Li,
Luigi Consolino,
Saverio Bartalini,
Paolo De Natale,
A. Giles Davies,
Edmund H. Linfield,
Miriam S. Vitiello
Abstract:
We report on the engineering of broadband quantum cascade lasers (QCLs) emitting at Terahertz (THz) frequencies, which exploit a heterogeneous active region scheme and have a current density dynamic range (Jdr) of 3.2, significantly larger than the state of the art, over a 1.3 THz bandwidth. We demonstrate that the devised broadband lasers operate as THz optical frequency comb synthesizers in cont…
▽ More
We report on the engineering of broadband quantum cascade lasers (QCLs) emitting at Terahertz (THz) frequencies, which exploit a heterogeneous active region scheme and have a current density dynamic range (Jdr) of 3.2, significantly larger than the state of the art, over a 1.3 THz bandwidth. We demonstrate that the devised broadband lasers operate as THz optical frequency comb synthesizers in continuous wave, with a maximum optical output power of 4 mW (0.73 mW in the comb regime). Measurement of the intermode beatnote map reveals a clear dispersion-compensated frequency comb regime extending over a continuous 106 mA current range (current density dynamic range of 1.24), significantly larger than the state of the art reported under similar geometries, with a corresponding emission bandwidth of 1.05 THz ans a stable and narrow (4.15 KHz) beatnote detected with a signal-to-noise ratio of 34 dB. Analysis of the electrical and thermal beatnote tuning reveals a current-tuning coefficient ranging between 5 MHz/mA and 2.1 MHz/mA and a temperature-tuning coefficient of -4 MHz/K. The ability to tune the THz QCL combs over their full dynamic range by temperature and current paves the way for their use as powerful spectroscopy tool that can provide broad frequency coverage combined with high precision spectral accuracy.
△ Less
Submitted 25 January, 2019;
originally announced January 2019.
-
Perfect energy-feeding into strongly coupled systems and interferometric control of polariton absorption
Authors:
Simone Zanotto,
Francesco P. Mezzapesa,
Federica Bianco,
Giorgio Biasiol,
Lorenzo Baldacci,
Miriam Serena Vitiello,
Lucia Sorba,
Raffaele Colombelli,
Alessandro Tredicucci
Abstract:
The ability to feed energy into a system, or - equivalently - to drive that system with an external input is a fundamental aspect of light-matter interaction. The key concept in many photonic applications is the "critical coupling" condition: at criticality, all the energy fed to the system via an input channel is dissipated within the system itself. Although this idea was crucial to enhance the e…
▽ More
The ability to feed energy into a system, or - equivalently - to drive that system with an external input is a fundamental aspect of light-matter interaction. The key concept in many photonic applications is the "critical coupling" condition: at criticality, all the energy fed to the system via an input channel is dissipated within the system itself. Although this idea was crucial to enhance the efficiency of many devices, it was never considered in the context of systems operating in a non-perturbative regime. In this so-called strong coupling regime, the matter and light degrees of freedom are in fact mixed into dressed states, leading to new eigenstates called polaritons. Here we demonstrate that the strong coupling regime and the critical coupling condition can indeed coexist; in this situation, which we term strong critical coupling, all the incoming energy is converted into polaritons. A semiclassical theory - equivalently applicable to acoustics or mechanics - reveals that the strong critical coupling corresponds to a special curve in the phase diagram of the coupled light-matter oscillators. In the more general case of a system radiating via two scattering ports, the phenomenology displayed is that of coherent perfect absorption (CPA), which is then naturally understood and described in the framework of critical coupling. Most importantly, we experimentally verify polaritonic CPA in a semiconductor-based intersubband-polariton photonic-crystal membrane resonator. This result opens new avenues in the exploration of polariton physics, making it possible to control the pumping efficiency of a system almost independently of its Rabi energy, i.e., of the energy exchange rate between the electromagnetic field and the material transition.
△ Less
Submitted 28 May, 2016;
originally announced May 2016.
-
Nanoscale displacement sensing based on nonlinear frequency mixing in quantum cascade lasers
Authors:
F. P. Mezzapesa,
L. L. Columbo,
G. De Risi,
M. Brambilla,
M. Dabbicco,
V. Spagnolo,
G. Scamarcio
Abstract:
We demonstrate a sensor scheme for nanoscale target displacement that relies on a single Quantum Cascade Laser (QCL) subject to optical feedback. The system combines the inherent sensitivity of QCLs to optical re-injection and their ultra-stability in the strong feedback regime where nonlinear frequency mixing phenomena are enhanced. An experimental proof of principle in the micrometer wavelength…
▽ More
We demonstrate a sensor scheme for nanoscale target displacement that relies on a single Quantum Cascade Laser (QCL) subject to optical feedback. The system combines the inherent sensitivity of QCLs to optical re-injection and their ultra-stability in the strong feedback regime where nonlinear frequency mixing phenomena are enhanced. An experimental proof of principle in the micrometer wavelength scale is provided. We perform real-time measurements of displacement with λ/100 resolution by inserting a fast-shifting reference etalon in the external cavity. The resulting signal dynamics at the QCL terminals shows a stroboscopic-like effect that relates the sensor resolution with the reference etalon speed. Intrinsic limits to the measurement algorithm and to the reference speed are discussed, disclosing that nanoscale ranges are attainable.
△ Less
Submitted 30 April, 2015;
originally announced May 2015.