-
Active Control of Polariton-Enabled Long-Range Energy Transfer
Authors:
A. Cargioli,
M. Lednev,
L. Lavista,
A. Camposeo,
A. Sassella,
D. Pisignano,
A. Tredicucci,
F. J. Garcia-Vidal,
J. Feist,
L. Persano
Abstract:
Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption…
▽ More
Optical control is achieved on the excited state energy transfer between spatially separated donor and acceptor molecules, both coupled to the same optical mode of a cavity. The energy transfer occurs through the formed hybrid polaritons and can be switched on and off by means of ultraviolet and visible light. The control mechanism relies on a photochromic component used as donor, whose absorption and emission properties can be varied reversibly through light irradiation, whereas in-cavity hybridization with acceptors through polariton states enables a 6-fold enhancement of acceptor/donor contribution to the emission intensity with respect to a reference multilayer. These results pave the way for synthesizing effective gating systems for the transport of energy by light, relevant for light-harvesting and light-emitting devices, and for photovoltaic cells.
△ Less
Submitted 9 February, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Gigahertz modulation of a fully dielectric nonlocal metasurface
Authors:
Alessandro Pitanti,
Gaia Da Prato,
Giorgio Biasiol,
Alessandro Tredicucci,
Simone Zanotto
Abstract:
Nonlocal metasurfaces are currently emerging as advanced tools for the manipulation of electromagnetic radiation, going beyond the widely explored Huygens metasurface concept. Nonetheless, the lack of an unified approach for their fast and efficient tunability still represents a serious challenge to overcome. In this article we report on gigahertz modulation of a dielectric slab-based, nonlocal (i…
▽ More
Nonlocal metasurfaces are currently emerging as advanced tools for the manipulation of electromagnetic radiation, going beyond the widely explored Huygens metasurface concept. Nonetheless, the lack of an unified approach for their fast and efficient tunability still represents a serious challenge to overcome. In this article we report on gigahertz modulation of a dielectric slab-based, nonlocal (i.e. angle-dispersive) metasurface, whose operation relies on the optomechanical coupling with a mechanical wave excited piezoelectrically by a transducer integrated on the same chip. Importantly, the metasurface region is free from any conductive material, thus eliminating optical losses, and making our device of potential interest for delicate environments such as high-power apparatuses or quantum optical systems.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Operability timescale of defect-engineered graphene
Authors:
Nicola Melchioni,
Luca Bellucci,
Alessandro Tredicucci,
Federica Bianco
Abstract:
Defects in the lattice are of primal importance to tune graphene chemical, thermal and electronic properties. Electron-beam irradiation is an easy method to induce defects in graphene following pre-designed patterns, but no systematic study of the time evolution of the resulting defects is available. In this paper, the change over time of defected sites created in graphene with low-energy (…
▽ More
Defects in the lattice are of primal importance to tune graphene chemical, thermal and electronic properties. Electron-beam irradiation is an easy method to induce defects in graphene following pre-designed patterns, but no systematic study of the time evolution of the resulting defects is available. In this paper, the change over time of defected sites created in graphene with low-energy ($\leq 20$ keV) electron irradiation is studied both experimentally via micro-Raman spectroscopy for a period of $6\times 10^3$ hours and through molecular dynamics simulations. During the first 10 h, the structural defects are stable at the highest density value. Subsequently, the crystal partially reconstructs, eventually reaching a stable, less defected condition after more than one month. The simulations allow the rationalization of the processes at the atomic level and confirm that the irradiation induces composite clusters of defects of different nature rather than well-defined nanoholes as in the case of high-energy electrons. The presented results identify the timescale of the defects stability, thus establishing the operability timespan of engineerable defect-rich graphene devices with applications in nanoelectronics. Moreover, long-lasting chemical reactivity of the defective graphene is pointed out. This property can be exploited to functionalize graphene for sensing and energy storage applications.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
-
Optical grade bromide-based thin film electrolytes
Authors:
Nicola Melchioni,
Giacomo Trupiano,
Giorgio Tofani,
Riccardo Bertini,
Andrea Mezzetta,
Federica Bianco,
Lorenzo Guazzelli,
Fabio Beltram,
Christian Silvio Pomelli,
Stefano Roddaro,
Alessandro Tredicucci,
Federico Paolucci
Abstract:
Controlling the charge density in low-dimensional materials with an electrostatic potential is a powerful tool to explore and influence their electronic and optical properties. Conventional solid gates impose strict geometrical constraints to the devices and often absorb electromagnetic radiation in the infrared (IR) region. A powerful alternative is ionic liquid (IL) gating. This technique only n…
▽ More
Controlling the charge density in low-dimensional materials with an electrostatic potential is a powerful tool to explore and influence their electronic and optical properties. Conventional solid gates impose strict geometrical constraints to the devices and often absorb electromagnetic radiation in the infrared (IR) region. A powerful alternative is ionic liquid (IL) gating. This technique only needs a metallic electrode in contact with the IL and the highest achievable electric field is limited by the electrochemical interactions of the IL with the environment. Despite the excellent gating properties, a large number of ILs is hardly exploitable for optical experiments in the mid-IR region, because they typically suffer from low optical transparency and degradation in ambient conditions. Here, we report the realization of two electrolytes based on bromide ILs dissolved in polymethyl methacrylate (PMMA). We demonstrate that such electrolytes can induce state-of-the-art charge densities as high as $20\times10^{15}\ \mathrm{cm^{-2}}$. Thanks to the low water absorption of PMMA, they work both in vacuum and in ambient atmosphere after a simple vacuum curing. Furthermore, our electrolytes can be spin coated into flat thin films with optical transparency in the range from 600 cm$^{-1}$ to 4000 cm$^{-1}$. Thanks to these properties, the electrolytes are excellent candidates to fill the gap as versatile gating layers for electronic and mid-IR optoelectronic devices.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Magnetic-field-induced cavity protection for intersubband polaritons
Authors:
Daniele De Bernardis,
Mathieu Jeannin,
Jean-Michel Manceau,
Raffaele Colombelli,
Alessandro Tredicucci,
Iacopo Carusotto
Abstract:
We analyse the effect of a strong perpendicular magnetic field on an intersubband transition in a disordered doped quantum well strongly coupled to an optical cavity. The magnetic field changes the lineshape of the intersubband optical transition due to the interface roughness of the quantum well from a Lorentzian to a Gaussian one. In this regime, a novel form of magnetic-field-induced cavity pro…
▽ More
We analyse the effect of a strong perpendicular magnetic field on an intersubband transition in a disordered doped quantum well strongly coupled to an optical cavity. The magnetic field changes the lineshape of the intersubband optical transition due to the interface roughness of the quantum well from a Lorentzian to a Gaussian one. In this regime, a novel form of magnetic-field-induced cavity protection sets in, which strongly reduces the polariton linewidth to the cavity contribution only. Implications of our results for fundamental studies of nonlinear polariton dynamics and for technological applications to polariton lasers are finally highlighted.
△ Less
Submitted 8 March, 2023; v1 submitted 14 October, 2022;
originally announced October 2022.
-
Strain-engineered wrinkles on graphene using polymeric actuators
Authors:
Davide Giambastiani,
Cosimo Tommasi,
Federica Bianco,
Filippo Fabbri,
Camilla Coletti,
Alessandro Tredicucci,
Alessandro Pitanti,
Stefano Roddaro
Abstract:
The electronic and optical properties of graphene can be precisely tuned by generating deterministic arrangements of strain features. In this paper, we report the formation of widespread and controlled buckling delamination of monolayer graphene deposited on hexagonal boron-nitride promoted by a significant squeezing of the graphene flake and induced by polymeric micro-actuators. The flexibility o…
▽ More
The electronic and optical properties of graphene can be precisely tuned by generating deterministic arrangements of strain features. In this paper, we report the formation of widespread and controlled buckling delamination of monolayer graphene deposited on hexagonal boron-nitride promoted by a significant squeezing of the graphene flake and induced by polymeric micro-actuators. The flexibility of this method offers a promising technique to create arbitrary buckling geometries and arrays of wrinkles which could also be subjected to iterative folding-unfolding cycles. Further development of this method could pave the way to tune the properties of several kinds of other two-dimensional materials, such as transition metal dichalcogenides, by tailoring their surface topography.
△ Less
Submitted 31 August, 2022; v1 submitted 21 May, 2022;
originally announced June 2022.
-
Cryptographic Strain-Dependent Light Pattern Generators
Authors:
Francesca D'Elia,
Francesco Pisani,
Alessandro Tredicucci,
Dario Pisignano,
Andrea Camposeo
Abstract:
Refractive freeform components are becoming increasingly relevant for generating controlled patterns of light, because of their capability to spatially-modulate optical signals with high efficiency and low background. However, the use of these devices is still limited by difficulties in manufacturing macroscopic elements with complex, 3-dimensional (3D) surface reliefs. Here, 3D-printed and stretc…
▽ More
Refractive freeform components are becoming increasingly relevant for generating controlled patterns of light, because of their capability to spatially-modulate optical signals with high efficiency and low background. However, the use of these devices is still limited by difficulties in manufacturing macroscopic elements with complex, 3-dimensional (3D) surface reliefs. Here, 3D-printed and stretchable magic windows generating light patterns by refraction are introduced. The shape and, consequently, the light texture achieved can be changed through controlled device strain. Cryptographic magic windows are demonstrated through exemplary light patterns, including micro-QR-codes, that are correctly projected and recognized upon strain gating while remaining cryptic for as-produced devices. The light pattern of micro-QR-codes can also be projected by two coupled magic windows, with one of them acting as the decryption key. Such novel, freeform elements with 3D shape and tailored functionalities is relevant for applications in illumination design, smart labels, anti-counterfeiting systems, and cryptographic communication.
△ Less
Submitted 15 April, 2022;
originally announced April 2022.
-
Optomechanical Modulation Spectroscopy of Bound-States-In-The-Continuum in a dielectric metasurface
Authors:
S. Zanotto,
G. Conte,
L. C. Bellieres,
A. Griol,
D. Navarro-Urrios,
A. Tredicucci,
A. Martìnez,
A. Pitanti
Abstract:
Elusive features in photonic and electronic devices can be detected by means of advanced, time-domain spectroscopic techniques. In this letter we introduce a novel kind of modulation spectroscopy, based on the optomechanical interaction of photonic and mechanical modes. Applying the technique to a Si metasurface and its drum-like mechanical modes, we detect narrow-band quasi-Bound-State-in-the-Con…
▽ More
Elusive features in photonic and electronic devices can be detected by means of advanced, time-domain spectroscopic techniques. In this letter we introduce a novel kind of modulation spectroscopy, based on the optomechanical interaction of photonic and mechanical modes. Applying the technique to a Si metasurface and its drum-like mechanical modes, we detect narrow-band quasi-Bound-State-in-the-Continuum (q-BIC) modes close to normal incidence, where their measurement can be hindered by a high symmetry protection and undesired background modes. Showing a visibility enhancement of more than one order of magnitude, the optomechanical modulation spectroscopy can be an innovative tool for precise spectroscopy of a wide set of photonic devices, including the goal of measuring purely symmetry protected BIC resonances.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Materials and devices for fundamental quantum science and quantum technologies
Authors:
Marco Polini,
Francesco Giazotto,
Kin Chung Fong,
Ioan M. Pop,
Carsten Schuck,
Tommaso Boccali,
Giovanni Signorelli,
Massimo D'Elia,
Robert H. Hadfield,
Vittorio Giovannetti,
Davide Rossini,
Alessandro Tredicucci,
Dmitri K. Efetov,
Frank H. L. Koppens,
Pablo Jarillo-Herrero,
Anna Grassellino,
Dario Pisignano
Abstract:
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In thi…
▽ More
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In this Perspective, we focus on advanced superconducting materials, van der Waals materials, and moiré quantum matter, summarizing recent exciting developments and highlighting a wealth of potential applications, ranging from high-energy experimental and theoretical physics to quantum materials science and energy storage.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Unexpected Electron Transport Suppression in a Heterostructures Graphene MoS2 Multiple Field-Effect Transistor Architecture
Authors:
Gaia Ciampalini,
Filippo Fabbri,
Guido Menichetti,
Luca Buoni,
Simona Pace,
Vaidotas Mišeikis,
Alessandro Pitanti,
Dario Pisignano,
Camilla Coletti,
Alessandro Tredicucci,
Stefano Roddaro
Abstract:
We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photolum…
▽ More
We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photoluminescence spectroscopies. Transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. Based on ab-initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counter-intuitively depends on the field-effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.
△ Less
Submitted 19 January, 2022; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Micromechanical bolometers for sub-Terahertz detection at room temperature
Authors:
Leonardo Vicarelli,
Alessandro Tredicucci,
Alessandro Pitanti
Abstract:
Fast, room temperature imaging at THz and sub-THz frequencies is an interesting feature which could unleash the full potential of plenty applications in security, healthcare and industrial production. In this Letter we introduce micromechanical bolometers based on silicon nitride trampoline membranes as broad-range detectors, down to the sub-THz frequencies. They show, at the largest wavelengths,…
▽ More
Fast, room temperature imaging at THz and sub-THz frequencies is an interesting feature which could unleash the full potential of plenty applications in security, healthcare and industrial production. In this Letter we introduce micromechanical bolometers based on silicon nitride trampoline membranes as broad-range detectors, down to the sub-THz frequencies. They show, at the largest wavelengths, room-temperature noise-equivalent-powers comparable to state-of-the-art commercial devices (~100 pW Hz-1/2); adding the good operation speed and the easy, large-scale fabrication process, the trampoline membrane could be the next candidate for cheap, room temperature THz imaging and related applications.
△ Less
Submitted 22 July, 2021;
originally announced July 2021.
-
Electron localization in periodically strained graphene
Authors:
Davide Giambastiani,
Francesco Colangelo,
Alessandro Tredicucci,
Stefano Roddaro,
Alessandro Pitanti
Abstract:
Pseudo-magnetic field (PMF) in deformed graphene has been proposed as a promising and flexible method to quantum-confine electronic states and create gaps in the local density of states. Motivated by this perspective, we numerically analyze various different configurations leading to electronic localization and band flattening in periodically strained graphene. In particular, we highlight the exis…
▽ More
Pseudo-magnetic field (PMF) in deformed graphene has been proposed as a promising and flexible method to quantum-confine electronic states and create gaps in the local density of states. Motivated by this perspective, we numerically analyze various different configurations leading to electronic localization and band flattening in periodically strained graphene. In particular, we highlight the existence of a fine structure in the pseudo-Landau levels confined in large-PMF regions, the emergence of states confined to PMF nodes as well as of snake-like orbits. In our paper, we further analyze the importance of the relative rotation and asymmetry of the strain lattice with respect to the atomic lattice and show how it can be used to modulate the PMF periodicity and to create localized orbits far from the strain points. Possible implementations and applications of the simulated structures are discussed.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Stress-strain in electron-beam activated polymeric micro-actuators
Authors:
Davide Giambastiani,
Fabio Dispinzeri,
Francesco Colangelo,
Stiven Forti,
Camilla Coletti,
Alessandro Tredicucci,
Alessandro Pitanti,
Stefano Roddaro
Abstract:
Actuation of thin polymeric films via electron irradiation is a promising avenue to realize devices based on strain engineered two dimensional (2D) materials. Complex strain profiles demand a deep understanding of the mechanics of the polymeric layer under electron irradiation; in this article we report a detailed investigation on electron-induced stress on poly-methyl-methacrylate (PMMA) thin fil…
▽ More
Actuation of thin polymeric films via electron irradiation is a promising avenue to realize devices based on strain engineered two dimensional (2D) materials. Complex strain profiles demand a deep understanding of the mechanics of the polymeric layer under electron irradiation; in this article we report a detailed investigation on electron-induced stress on poly-methyl-methacrylate (PMMA) thin film material. After an assessment of stress values using a method based on dielectric cantilevers, we directly investigate the lateral shrinkage of PMMA patterns on epitaxial graphene, which reveals a universal behavior, independent of the electron acceleration energy. By knowing the stress-strain curve, we finally estimate an effective Young's modulus of PMMA on top of graphene which is a relevant parameter for PMMA based electron-beam lithography and strain engineering applications.
△ Less
Submitted 5 July, 2020;
originally announced July 2020.
-
Photonic bands, superchirality, and inverse design of a chiral minimal metasurface
Authors:
Simone Zanotto,
Giacomo Mazzamuto,
Francesco Riboli,
Giorgio Biasiol,
Giuseppe C. La Rocca,
Alessandro Tredicucci,
Alessandro Pitanti
Abstract:
Photonic band structures are a typical fingerprint of periodic optical structures, and are usually observed in spectroscopic quantities such as transmission, reflection and absorption. Here we show that also the chiro-optical response of a metasurface constituted by a lattice of non-centrosymmetric, L-shaped holes in a dielectric slab shows a band structure, where intrinsic and extrinsic chirality…
▽ More
Photonic band structures are a typical fingerprint of periodic optical structures, and are usually observed in spectroscopic quantities such as transmission, reflection and absorption. Here we show that also the chiro-optical response of a metasurface constituted by a lattice of non-centrosymmetric, L-shaped holes in a dielectric slab shows a band structure, where intrinsic and extrinsic chirality effects are clearly recognized and connected to localized and delocalized resonances. Superchiral near-fields can be excited in correspondence to these resonances, and anomalous behaviors as a function of the incidence polarization occur. Moreover, we introduce a singular value decomposition (SVD) approach to show that the above mentioned effects are connected to specific fingerprints of the SVD spectra. Finally, we demonstrate by means of an inverse design technique that the metasurface based on an L-shaped hole array is a minimal one. Indeed, its unit cell geometry depends on the smallest number of parameters needed to implement arbitrary transmission matrices compliant with the general symmetries for 2d-chiral structures. These observations enable more powerful wave operations in a lossless photonic environment.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser
Authors:
Andrea Ottomaniello,
James Keeley,
Pierluigi Rubino,
Lianhe Li,
Marco Cecchini,
Edmund H. Linfield,
A. Giles Davies,
Paul Dean,
Alessandro Pitanti,
Alessandro Tredicucci
Abstract:
The effectiveness of self-mixing interferometry has been demonstrated across the electromagnetic spectrum, from visible to microwave frequencies, in a plethora of sensing applications, ranging from distance measurement to material analysis, microscopy and coherent imaging. Owing to their intrinsic stability to optical feedback, quantum cascade lasers (QCLs) represent a source that offers unique an…
▽ More
The effectiveness of self-mixing interferometry has been demonstrated across the electromagnetic spectrum, from visible to microwave frequencies, in a plethora of sensing applications, ranging from distance measurement to material analysis, microscopy and coherent imaging. Owing to their intrinsic stability to optical feedback, quantum cascade lasers (QCLs) represent a source that offers unique and versatile characteristics to further improve the self-mixing functionality at mid infrared and terahertz (THz) frequencies. Here, we show the feasibility of detecting with nanometer precision deeply subwalength (< λ/6000) mechanical vibrations of a suspended Si3N4-membrane used as the external element of a THz QCL feedback interferometric apparatus. Besides representing a platform for the characterization of small displacements, our self-mixing configuration can be exploited for the realization of optomechanical systems, where several laser sources can be linked together through a common mechanical microresonator actuated by radiation pressure.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Local tuning of WS2 photoluminescence using polymeric micro-actuators in a monolithic van der Waals heterostructure
Authors:
Francesco Colangelo,
Andrea Morandi,
Stiven Forti,
Filippo Fabbri,
Camilla Coletti,
Flavia Viola Di Girolamo,
Alberto Di Lieto,
Mauro Tonelli,
Alessandro Tredicucci,
Alessandro Pitanti,
Stefano Roddaro
Abstract:
The control of the local strain profile in 2D materials offers an invaluable tool for tailoring the electronic and photonic properties of solid-state devices. In this paper, we demonstrate a local engineering of the exciton photoluminescence (PL) energy of monolayer tungsten disulfide (WS2) by means of strain. We apply a local uniaxial stress to WS2 by exploiting electron-beam patterned and actuat…
▽ More
The control of the local strain profile in 2D materials offers an invaluable tool for tailoring the electronic and photonic properties of solid-state devices. In this paper, we demonstrate a local engineering of the exciton photoluminescence (PL) energy of monolayer tungsten disulfide (WS2) by means of strain. We apply a local uniaxial stress to WS2 by exploiting electron-beam patterned and actuated polymeric micrometric artificial muscles (MAMs), which we implement onto monolithic synthetic WS2/graphene heterostructures. We show that MAMs are able to induce an in-plane stress to the top WS2 layer of the van der Waals heterostructure and that the latter can slide on the graphene underneath with negligible friction. As a proof of concept for the local strain-induced PL shift experiments, we exploit a two-MAM configuration in order to apply uniaxial tensile stress on well-defined micrometric regions of WS2. Remarkably, our architecture does not require the adoption of fragile suspended microstructures. We observe a spatial modulation of the excitonic PL energy of the WS2 monolayers under stress, which agrees with the expected strain profile and attains a maximum redshift of about 40 meV at the maximum strain intensity point. After the actuation, a time-dependent PL blueshift is observed in agreement with the viscoelastic properties of the polymeric MAMs. Our approach enables inducing local and arbitrary deformation profiles and circumvents some key limitations and technical challenges of alternative strain engineering methods requiring the 2D material transfer and production of suspended membranes.
△ Less
Submitted 6 November, 2019; v1 submitted 15 March, 2019;
originally announced March 2019.
-
Optomechanics of chiral dielectric metasurfaces
Authors:
Simone Zanotto,
Alessandro Tredicucci,
Daniel Navarro-Urrios,
Marco Cecchini,
Giorgio Biasiol,
Davide Mencarelli,
Luca Pierantoni,
Alessandro Pitanti
Abstract:
Electromagnetic fields coupled with mechanical degrees of freedom have recently shown exceptional and innovative applications, ultimately leading to mesoscopic optomechanical devices operating in the quantum regime of motion. Simultaneously, micromechanical elements have provided new ways to enhance and manipulate the optical properties of passive photonic elements. Following this concept, in this…
▽ More
Electromagnetic fields coupled with mechanical degrees of freedom have recently shown exceptional and innovative applications, ultimately leading to mesoscopic optomechanical devices operating in the quantum regime of motion. Simultaneously, micromechanical elements have provided new ways to enhance and manipulate the optical properties of passive photonic elements. Following this concept, in this article we show how combining a chiral metasurface with a GaAs suspended micromembrane can offer new scenarios for controlling the polarization state of near-infrared light beams. Starting from the uncommon properties of chiral metasurface to statically realize target polarization states and circular and linear dichroism, we report mechanically induced, ~300 kHz polarization modulation, which favorably compares, in terms of speed, with liquid-crystals commercial devices. Moreover, we demonstrate how the mechanical resonance can be non-trivially affected by the input light polarization (and chiral state) via a thermoelastic effect triggered by intracavity photons. This work inaugurates the field of Polarization Optomechanics, which could pave the way to fast polarimetric devices, polarization modulators and dynamically tunable chiral state generators and detectors, as well as giving access to new form of polarization nonlinearities and control.
△ Less
Submitted 3 October, 2018;
originally announced October 2018.
-
Gate-tunable spatial modulation of localized plasmon resonances
Authors:
Andrea Arcangeli,
Francesco Rossella,
Andrea Tomadin,
Jihua Xu,
Daniele Ercolani,
Lucia Sorba,
Fabio Beltram,
Alessandro Tredicucci,
Marco Polini,
Stefano Roddaro
Abstract:
Nanoplasmonics exploits the coupling between light and collective electron density oscillations (plasmons) to bypass the stringent limits imposed by diffraction. This coupling enables confinement of light to sub-wavelength volumes and is usually exploited in nanostructured metals. Substantial efforts are being made at the current frontier of the field to employ electron systems in semiconducting a…
▽ More
Nanoplasmonics exploits the coupling between light and collective electron density oscillations (plasmons) to bypass the stringent limits imposed by diffraction. This coupling enables confinement of light to sub-wavelength volumes and is usually exploited in nanostructured metals. Substantial efforts are being made at the current frontier of the field to employ electron systems in semiconducting and semimetallic materials since these add the exciting possibility of realizing electrically tunable and/or active nanoplasmonic devices. Here we demonstrate that a suitable design of the doping profile in a semiconductor nanowire (NW) can be used to tailor the plasmonic response and induce localization effects akin to those observed in metal nanoparticles. Moreover, by field-effect carrier modulation, we demonstrate that these localized plasmon resonances can be spatially displaced along the nanostructure body, thereby paving the way for the implementation of spatially tunable plasmonic circuits.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Black-Phosphorus Terahertz Photodetectors
Authors:
Leonardo Viti,
Jin Hu,
Dominique Coquillat,
Wojciech Knap,
Alessandro Tredicucci,
Antonio Politano,
Miriam Serena Vitiello
Abstract:
The discovery of graphene and the related fascinating capabilities have triggered an unprecedented interest in inorganic two-dimensional (2D) materials. Despite the impressive impact in a variety of photonic applications, the absence of energy gap has hampered its broader applicability in many optoelectronic devices. The recent advance of novel 2D materials, such as transition-metal dichalcogenide…
▽ More
The discovery of graphene and the related fascinating capabilities have triggered an unprecedented interest in inorganic two-dimensional (2D) materials. Despite the impressive impact in a variety of photonic applications, the absence of energy gap has hampered its broader applicability in many optoelectronic devices. The recent advance of novel 2D materials, such as transition-metal dichalcogenides or atomically thin elemental materials, (e.g. silicene, germanene and phosphorene) promises a revolutionary step-change. Here we devise the first room-temperature Terahertz (THz) frequency detector exploiting few-layer phosphorene, e.g., a 10 nm thick flake of exfoliated crystalline black phosphorus (BP), as active channel of a field-effect transistor (FET). By exploiting the direct band gap of BP to fully switch between insulating and conducting states and by engineering proper antennas for efficient light harvesting, we reach detection performance comparable with commercial detection technologies, providing the first technological demonstration of a phosphorus-based active THz device.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
THz detection with epitaxial graphene field effect transistors on silicon carbide
Authors:
F. Bianco,
D. Perenzoni,
D. Convertino,
S. L. De Bonis,
D. Spirito,
M. S. Vitiello,
C. Coletti,
M. Perenzoni,
A. Tredicucci
Abstract:
We report on room temperature THz detection by means of antenna-coupled field effect transistors fabricated by using epitaxial graphene grown on silicon carbide substrate. Two independent detection mechanisms are found: plasma wave assisted-detection and thermoelectric effect, which is ascribed to the presence of junctions along the FET channel. The superposition of the calculated functional depen…
▽ More
We report on room temperature THz detection by means of antenna-coupled field effect transistors fabricated by using epitaxial graphene grown on silicon carbide substrate. Two independent detection mechanisms are found: plasma wave assisted-detection and thermoelectric effect, which is ascribed to the presence of junctions along the FET channel. The superposition of the calculated functional dependence of both the plasmonic and thermoelectric photovoltages on the gate bias qualitatively well reproduces the measured photovoltages. Additionally, the sign reversal of the measured photovoltage demonstrates the stronger contribution of the plasmonic detection compared to the thermoelectric mechanism. Although responsivity improvement is necessary, these results demonstrate that plasmonic detectors fabricated by epitaxial graphene on silicon carbide are potential candidates for fast large area imaging of macroscopic samples.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Stretching graphene using polymeric micro-muscles
Authors:
Francesco Colangelo,
Alessandro Pitanti,
Vaidotas Mišeikis,
Camilla Coletti,
Pasqualantonio Pingue,
Dario Pisignano,
Fabio Beltram,
Alessandro Tredicucci,
Stefano Roddaro
Abstract:
The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploitin…
▽ More
The control of strain in two-dimensional materials opens exciting perspectives for the engineering of their electronic properties. While this expectation has been validated by artificial-lattice studies, it remains elusive in the case of atomic lattices. Remarkable results were obtained on nanobubbles and nano-wrinkles, or using scanning probes; microscale strain devices were implemented exploiting deformable substrates or external loads. These devices lack, however, the flexibility required to fully control and investigate arbitrary strain profiles. Here, we demonstrate a novel approach making it possible to induce strain in graphene using polymeric micrometric artificial muscles (MAMs) that contract in a controllable and reversible way under an electronic stimulus. Our method exploits the mechanical response of poly-methyl-methacrylate (PMMA) to electron-beam irradiation. Inhomogeneous anisotropic strain and out-of-plane deformation are demonstrated and studied by Raman, scanning-electron and atomic-force microscopy. These can all be easily combined with the present device architecture. The flexibility of the present method opens new opportunities for the investigation of strain and nanomechanics in two-dimensional materials.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
Mechanical oscillations in lasing microspheres
Authors:
A. Toncelli,
N. E. Capuj,
B. Garrido,
M. Sledzinska,
C. M. Sotomayor-Torres,
A. Tredicucci,
D. Navarro-Urrios
Abstract:
We investigate the feasibility of activating coherent mechanical oscillations in lasing microspheres by modulating the laser emission at a mechanical eigenfrequency. To this aim, 1.5% Nd3+:Barium-Titanium-Silicate microspheres with diameters around 50 μm were used as high quality factor (Q>10^6) whispering gallery mode lasing cavities. We have implemented a pump-and-probe technique in which the pu…
▽ More
We investigate the feasibility of activating coherent mechanical oscillations in lasing microspheres by modulating the laser emission at a mechanical eigenfrequency. To this aim, 1.5% Nd3+:Barium-Titanium-Silicate microspheres with diameters around 50 μm were used as high quality factor (Q>10^6) whispering gallery mode lasing cavities. We have implemented a pump-and-probe technique in which the pump laser used to excite the Nd3+ ions is focused on a single microsphere with a microscope objective and a probe laser excites a specific optical mode with the evanescent field of a tapered fibre. The studied microspheres show monomode and multi-mode lasing action, which can be modulated in the best case up to 10 MHz. We have optically transduced thermally-activated mechanical eigenmodes appearing in the 50-70 MHz range, the frequency of which decreases with increasing the size of the microspheres. In a pump-and-probe configuration we observed modulation of the probe signal up to the maximum pump modulation frequency of our experimental setup, i.e., 20 MHz. This modulation decreases with frequency and is unrelated to lasing emission, pump scattering or thermal effects. We associate this effect to free-carrier-dispersion induced by multiphoton pump light absorption. On the other hand, we conclude that, in our current experimental conditions, it was not possible to resonantly excite the mechanical modes. Finally, we discuss on how to overcome these limitations by increasing the modulation frequency of the lasing emission and decreasing the frequency of the mechanical eigenmodes displaying a strong degree of optomechanical coupling.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Defect Line Terahertz Quantum Cascade Laser
Authors:
Adam Klimont,
Riccardo Degl'Innocenti,
Luca Masini,
Yuqing Wu,
Yash D. Shah,
Yuan Ren,
David S. Jessop,
Alessandro Tredicucci,
Harvey E. Beere,
David A. Ritchie
Abstract:
We present terahertz quantum cascade lasers operating at a defect mode of a photonic crystal bandgap. This class of devices exhibits single mode emission and low threshold current compared to standard metal-metal lasers. The mode selectivity is an intrinsic property of the chosen fabrication design. The lower lasing threshold effect, already reported in photonic crystal quantum cascade lasers, is…
▽ More
We present terahertz quantum cascade lasers operating at a defect mode of a photonic crystal bandgap. This class of devices exhibits single mode emission and low threshold current compared to standard metal-metal lasers. The mode selectivity is an intrinsic property of the chosen fabrication design. The lower lasing threshold effect, already reported in photonic crystal quantum cascade lasers, is further enhanced in the ultra-flat-dispersion defect line. The presented results pave the way for integrated circuitry operating in the terahertz regime and have important applications in the field of quantum cascade lasers, spectroscopy and microcavity lasers.
△ Less
Submitted 13 March, 2017;
originally announced March 2017.
-
Anisotropic straining of graphene using micropatterned SiN membranes
Authors:
Fabiana Francesca Settembrini,
Francesco Colangelo,
Alessandro Pitanti,
Vaidotas Miseikis,
Camilla Coletti,
Guido Menichetti,
Renato Colle,
Giuseppe Grosso,
Alessandro Tredicucci,
Stefano Roddaro
Abstract:
We use micro-Raman spectroscopy to study strain profiles in graphene monolayers suspended over SiN membranes micropatterned with holes of non-circular geometry. We show that a uniform differential pressure load $ΔP$ over elliptical regions of free-standing graphene yields measurable deviations from hydrostatic strain conventionally observed in radially-symmetric microbubbles. The top hydrostatic s…
▽ More
We use micro-Raman spectroscopy to study strain profiles in graphene monolayers suspended over SiN membranes micropatterned with holes of non-circular geometry. We show that a uniform differential pressure load $ΔP$ over elliptical regions of free-standing graphene yields measurable deviations from hydrostatic strain conventionally observed in radially-symmetric microbubbles. The top hydrostatic strain $\bar{\varepsilon}$ we observe is estimated to be $\approx0.7\%$ for $ΔP = 1\,{\rm bar}$ in graphene clamped to elliptical SiN holes with axis $40$ and $20\,{\rm μm}$. In the same configuration, we report a $G_\pm$ splitting of $10\,{\rm cm^{-1}}$ which is in good agreement with the calculated anisotropy $Δ\varepsilon \approx 0.6\%$ for our device geometry. Our results are consistent with the most recent reports on the Grüneisen parameters. Perspectives for the achievement of arbitrary strain configurations by designing suitable SiN holes and boundary clamping conditions are discussed.
△ Less
Submitted 22 June, 2016;
originally announced June 2016.
-
Mid-Infrared intersubband polaritons in dispersive metal-insulator-metal resonators
Authors:
Jean-Michel Manceau,
Simone Zanotto,
Tommaso Ongarello,
Lucia Sorba,
Alessandro Tredicucci,
Giorgio Biasiol,
Raffaele Colombelli
Abstract:
We demonstrate room-temperature strong-coupling between a mid-infrared ($λ$=9.9 $μ$m) intersubband transition and the fundamental cavity mode of a metal-insulator-metal resonator. Patterning of the resonator surface enables surface-coupling of the radiation and introduces an energy dispersion which can be probed with angle-resolved reflectivity. In particular, the polaritonic dispersion presents a…
▽ More
We demonstrate room-temperature strong-coupling between a mid-infrared ($λ$=9.9 $μ$m) intersubband transition and the fundamental cavity mode of a metal-insulator-metal resonator. Patterning of the resonator surface enables surface-coupling of the radiation and introduces an energy dispersion which can be probed with angle-resolved reflectivity. In particular, the polaritonic dispersion presents an accessible energy minimum at k=0 where - potentially - polaritons can accumulate. We also show that it is possible to maximize the coupling of photons into the polaritonic states and - simultaneously - to engineer the position of the minimum Rabi splitting at a desired value of the in-plane wavevector. This can be precisely accomplished via a simple post-processing technique. The results are confirmed using the temporal coupled mode theory formalism and their significance in the context of the concept of strong critical coupling is highlighted.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
Coherent perfect absorption in photonic structures
Authors:
Lorenzo Baldacci,
Simone Zanotto,
Alessandro Tredicucci
Abstract:
The ability to drive a system with an external input is a fundamental aspect of light-matter interaction. The coherent perfect absorption (CPA) phenomenon extends to the general multibeam interference phenomenology the well known critical coupling concepts. This interferometric control of absorption can be employed to reach full delivery of optical energy to nanoscale systems such as plasmonic nan…
▽ More
The ability to drive a system with an external input is a fundamental aspect of light-matter interaction. The coherent perfect absorption (CPA) phenomenon extends to the general multibeam interference phenomenology the well known critical coupling concepts. This interferometric control of absorption can be employed to reach full delivery of optical energy to nanoscale systems such as plasmonic nanoparticles, and multi-port interference can be used to enhance the absorption of a nanoscale device when it is embedded in a strongly scattering system, with potential applications to nanoscale sensing. Here we review the two-port CPA in reference to photonic structures which can resonantly couple to the external fields. A revised two-port theory of CPA is illustrated, which relies on the Scattering Matrix formalism and is valid for all linear two-port systems with reciprocity. Through a semiclassical approach, treating two-port critical coupling conditions in a non-perturbative regime, it is demonstrated that the strong coupling regime and the critical coupling condition can indeed coexist; in this situation, termed strong critical coupling, all the incoming energy is converted into polaritons. Experimental results are presented, which clearly display the elliptical trace of absorption as function of input unbalance in a thin metallo-dielectric metamaterial, and verify polaritonic CPA in an intersubband-polariton photonic-crystal membrane resonator. Concluding remarks discuss the future perspectives of CPA with photonic structures.
△ Less
Submitted 1 June, 2016;
originally announced June 2016.
-
Distributed feedback terahertz frequency quantum cascade lasers with dual periodicity gratings
Authors:
F. Castellano,
S. Zanotto,
L. H. Li,
A. Pitanti,
A. Tredicucci,
E. H. Linfield,
A. G. Davies,
M. S. Vitiello
Abstract:
We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, w…
▽ More
We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, was designed through use of an appropriate wavevector scattering model. Single mode THz emission at angles tuned by design between 0° and 50° was realized, leading to an original phase-matching approach, lithographically independent, for highly collimated THz QCLs.
△ Less
Submitted 30 May, 2016;
originally announced May 2016.
-
Photonic bands and defect modes in metallo-dielectric photonic crystal slabs
Authors:
Simone Zanotto,
Giorgio Biasiol,
Lucia Sorba,
Alessandro Tredicucci
Abstract:
Photonic components based on structured metallic elements show great potential for device applications where field enhancement and confinement of the radiation on a subwavelength scale is required. In this paper we report a detailed study of a prototypical metallo-dielectric photonic structure, where features well known in the world of dielectric photonic crystals, like band gaps and defect modes,…
▽ More
Photonic components based on structured metallic elements show great potential for device applications where field enhancement and confinement of the radiation on a subwavelength scale is required. In this paper we report a detailed study of a prototypical metallo-dielectric photonic structure, where features well known in the world of dielectric photonic crystals, like band gaps and defect modes, are exported to the metallic counterpart, with interesting applications to infrared science and technology, as for instance in quantum well infrared photodetectors, narrow-band spectral filters, and tailorable thermal emitters.
△ Less
Submitted 30 May, 2016;
originally announced May 2016.
-
Perfect energy-feeding into strongly coupled systems and interferometric control of polariton absorption
Authors:
Simone Zanotto,
Francesco P. Mezzapesa,
Federica Bianco,
Giorgio Biasiol,
Lorenzo Baldacci,
Miriam Serena Vitiello,
Lucia Sorba,
Raffaele Colombelli,
Alessandro Tredicucci
Abstract:
The ability to feed energy into a system, or - equivalently - to drive that system with an external input is a fundamental aspect of light-matter interaction. The key concept in many photonic applications is the "critical coupling" condition: at criticality, all the energy fed to the system via an input channel is dissipated within the system itself. Although this idea was crucial to enhance the e…
▽ More
The ability to feed energy into a system, or - equivalently - to drive that system with an external input is a fundamental aspect of light-matter interaction. The key concept in many photonic applications is the "critical coupling" condition: at criticality, all the energy fed to the system via an input channel is dissipated within the system itself. Although this idea was crucial to enhance the efficiency of many devices, it was never considered in the context of systems operating in a non-perturbative regime. In this so-called strong coupling regime, the matter and light degrees of freedom are in fact mixed into dressed states, leading to new eigenstates called polaritons. Here we demonstrate that the strong coupling regime and the critical coupling condition can indeed coexist; in this situation, which we term strong critical coupling, all the incoming energy is converted into polaritons. A semiclassical theory - equivalently applicable to acoustics or mechanics - reveals that the strong critical coupling corresponds to a special curve in the phase diagram of the coupled light-matter oscillators. In the more general case of a system radiating via two scattering ports, the phenomenology displayed is that of coherent perfect absorption (CPA), which is then naturally understood and described in the framework of critical coupling. Most importantly, we experimentally verify polaritonic CPA in a semiconductor-based intersubband-polariton photonic-crystal membrane resonator. This result opens new avenues in the exploration of polariton physics, making it possible to control the pumping efficiency of a system almost independently of its Rabi energy, i.e., of the energy exchange rate between the electromagnetic field and the material transition.
△ Less
Submitted 28 May, 2016;
originally announced May 2016.
-
Saturation and bistability of defect-mode intersubband polaritons
Authors:
Simone Zanotto,
Federica Bianco,
Giorgio Biasiol,
Lucia Sorba,
Alessandro Tredicucci
Abstract:
In this article we report about linear and nonlinear optical properties of intersubband cavity polariton samples, where the resonant photonic mode is a defect state in a metallo-dielectric photonic crystal slab. By tuning a single geometric parameter of the resonator, the cavity Q-factor can reach values as large as 85, with a consequent large cooperativity for the light-matter interaction. We sho…
▽ More
In this article we report about linear and nonlinear optical properties of intersubband cavity polariton samples, where the resonant photonic mode is a defect state in a metallo-dielectric photonic crystal slab. By tuning a single geometric parameter of the resonator, the cavity Q-factor can reach values as large as 85, with a consequent large cooperativity for the light-matter interaction. We show that a device featuring large cooperativity leads to sharp saturation, or even bistability, of the polariton states. This nonlinear dynamics occurs at the crossover between the weak and the strong coupling regimes, where the weak critical coupling concept plays a fundamental role.
△ Less
Submitted 28 May, 2016;
originally announced May 2016.
-
Thermal noise and optomechanical features in the emission of a membrane-coupled compound cavity laser diode
Authors:
Lorenzo Baldacci,
Alessandro Pitanti,
Luca Masini,
Andrea Arcangeli,
Francesco Colangelo,
Daniel Navarro-Urrios,
Alessandro Tredicucci
Abstract:
We demonstrate the use of a compound optical cavity as linear displacement detector, by measuring the thermal motion of a silicon nitride suspended membrane acting as the external mirror of a near-infrared Littrow laser diode. Fluctuations in the laser optical power induced by the membrane vibrations are collected by a photodiode integrated within the laser, and then measured with a spectrum analy…
▽ More
We demonstrate the use of a compound optical cavity as linear displacement detector, by measuring the thermal motion of a silicon nitride suspended membrane acting as the external mirror of a near-infrared Littrow laser diode. Fluctuations in the laser optical power induced by the membrane vibrations are collected by a photodiode integrated within the laser, and then measured with a spectrum analyzer. The dynamics of the membrane driven by a piezoelectric actuator is investigated as a function of air pressure and actuator displacement in a homodyne configuration. The high Q-factor ($\sim 3.4\cdot 10^4$ at $8.3 \cdot 10^{-3}$ mbar) of the fundamental mechanical mode at $\sim 73$ kHz guarantees a detection sensitivity high enough for direct measurement of thermal motion at room temperature ($\sim 87$ pm RMS). The compound cavity system here introduced can be employed as a table-top, cost-effective linear displacement detector for cavity optomechanics. Furthermore, thanks to the strong optical nonlinearities of the laser compound cavity, these systems open new perspectives in the study of non-Markovian quantum properties at the mesoscale.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.
-
Universal lineshapes at the crossover between weak and strong critical coupling in Fano-resonant coupled oscillators
Authors:
Simone Zanotto,
Alessandro Tredicucci
Abstract:
In this article we discuss a model describing key features concerning the lineshapes and the coherent absorption conditions in Fano-resonant dissipative coupled oscillators. The model treats on the same footing the weak and strong coupling regimes, and includes the critical coupling concept, which is of great relevance in numerous applications; in addition, the role of asymmetry is thoroughly anal…
▽ More
In this article we discuss a model describing key features concerning the lineshapes and the coherent absorption conditions in Fano-resonant dissipative coupled oscillators. The model treats on the same footing the weak and strong coupling regimes, and includes the critical coupling concept, which is of great relevance in numerous applications; in addition, the role of asymmetry is thoroughly analyzed. Due to the wide generality of the model, which can be adapted to various frameworks like nanophotonics, plasmonics, and optomechanics, we envisage that the analytical formulas presented here will be crucial to effectively design devices and to interpret experimental results.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
Vertical coupling of laser glass microspheres to buried silicon nitride ellipses and waveguides
Authors:
Daniel Navarro-Urrios,
Joan Manel Ramirez,
Nestor E. Capuj,
Yonder Berencen,
Blas Garrido,
Alessandro Tredicucci
Abstract:
We demonstrate the integration of Nd3+ doped Barium-Titanium-Silicate microsphere lasers with a Silicon Nitride photonic platform. Devices with two different geometrical configurations for extracting the laser light to buried waveguides have been fabricated and characterized. The first configuration relies on a standard coupling scheme, where the microspheres are placed over strip waveguides. The…
▽ More
We demonstrate the integration of Nd3+ doped Barium-Titanium-Silicate microsphere lasers with a Silicon Nitride photonic platform. Devices with two different geometrical configurations for extracting the laser light to buried waveguides have been fabricated and characterized. The first configuration relies on a standard coupling scheme, where the microspheres are placed over strip waveguides. The second is based on a buried elliptical geometry whose working principle is that of an elliptical mirror. In the latter case, the input of a strip waveguide is placed on one focus of the ellipse, while a lasing microsphere is placed on top of the other focus. The fabricated elliptical geometry (ellipticity=0.9) presents a light collecting capacity that is 50% greater than that of the standard waveguide coupling configuration and could be further improved by increasing the ellipticity. Moreover, since the dimensions of the spheres are much smaller than those of the ellipses, surface planarization is not required. On the contrary, we show that the absence of a planarization step strongly damages the microsphere lasing performance in the standard configuration.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
Far-field characterization of the thermal dynamics in lasing microspheres
Authors:
J. M. Ramirez,
D. Navarro-Urrios,
N. E. Capuj,
Y. Berencen,
A. Pitanti,
B. Garrido,
A. Tredicucci
Abstract:
This work reports the dynamical thermal behavior of lasing microspheres placed on a dielectric substrate while they are homogeneously heated-up by the top-pump laser used to excite the active medium. The lasing modes are collected in the far-field and their temporal spectral traces show characteristic lifetimes of about 2 ms. The latter values scale with the microsphere radius and are independent…
▽ More
This work reports the dynamical thermal behavior of lasing microspheres placed on a dielectric substrate while they are homogeneously heated-up by the top-pump laser used to excite the active medium. The lasing modes are collected in the far-field and their temporal spectral traces show characteristic lifetimes of about 2 ms. The latter values scale with the microsphere radius and are independent of the pump power in the studied range. Finite-Element Method simulations reproduce the experimental results, revealing that the thermal dynamics is dominated by the heat dissipated towards the substrate through the medium surrounding the contact point. The characteristic system scale regarding thermal transport is of few hundreds of nanometers, thus enabling an effective toy model for investigating heat conduction in non-continuum gaseous media and near-field radiative energy transfer.
△ Less
Submitted 13 April, 2015;
originally announced April 2015.
-
Linear and nonlinear capacitive coupling of electro-opto-mechanical photonic crystal cavities
Authors:
Alessandro Pitanti,
Johannes M. Fink,
Amir H. Safavi-Naeini,
Chan U. Lei,
Jeff T. Hill,
Alessandro Tredicucci,
Oskar Painter
Abstract:
We fabricate and characterize a microscale silicon electro-opto-mechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a…
▽ More
We fabricate and characterize a microscale silicon electro-opto-mechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a silicon surface quality necessary for minimizing optical loss. Using the sensitive optical read-out of the photonic crystal cavity, we characterize the linear and nonlinear capacitive coupling to the fundamental 63 MHz in-plane flexural motion of the structure, showing that the large electromechanical coupling in such devices may be suitable for realizing efficient microwave-to-optical signal conversion.
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
High performance bilayer-graphene Terahertz detectors
Authors:
Davide Spirito,
Dominique Coquillat,
Sergio L. De Bonis,
Antonio Lombardo,
Matteo Bruna,
Andrea C. Ferrari,
Vittorio Pellegrini,
Alessandro Tredicucci,
Wojciech Knap,
Miriam S. Vitiello
Abstract:
We report bilayer-graphene field effect transistors operating as THz broadband photodetectors based on plasma-waves excitation. By employing wide-gate geometries or buried gate configurations, we achieve a responsivity $\sim 1.2V/W (1.3 mA/W)$ and a noise equivalent power $\sim 2\times 10^{-9} W/Hz^{-1/2}$ in the 0.29-0.38 THz range, in photovoltage and photocurrent mode. The potential of this tec…
▽ More
We report bilayer-graphene field effect transistors operating as THz broadband photodetectors based on plasma-waves excitation. By employing wide-gate geometries or buried gate configurations, we achieve a responsivity $\sim 1.2V/W (1.3 mA/W)$ and a noise equivalent power $\sim 2\times 10^{-9} W/Hz^{-1/2}$ in the 0.29-0.38 THz range, in photovoltage and photocurrent mode. The potential of this technology for scalability to higher frequencies and the development of flexible devices makes our approach competitive for a future generation of THz detection systems.
△ Less
Submitted 13 December, 2013;
originally announced December 2013.
-
Photocurrent-based detection of Terahertz radiation in graphene
Authors:
Andrea Tomadin,
Alessandro Tredicucci,
Vittorio Pellegrini,
Miriam S. Vitiello,
Marco Polini
Abstract:
Graphene is a promising candidate for the development of detectors of Terahertz (THz) radiation. A well-known detection scheme due to Dyakonov and Shur exploits the confinement of plasma waves in a field-effect transistor (FET), whereby a dc photovoltage is generated in response to a THz field. This scheme has already been experimentally studied in a graphene FET [L. Vicarelli et al., Nature Mat.…
▽ More
Graphene is a promising candidate for the development of detectors of Terahertz (THz) radiation. A well-known detection scheme due to Dyakonov and Shur exploits the confinement of plasma waves in a field-effect transistor (FET), whereby a dc photovoltage is generated in response to a THz field. This scheme has already been experimentally studied in a graphene FET [L. Vicarelli et al., Nature Mat. 11, 865 (2012)]. In the quest for devices with a better signal-to-noise ratio, we theoretically investigate a plasma-wave photodetector in which a dc photocurrent is generated in a graphene FET. The rectified current features a peculiar change of sign when the frequency of the incoming radiation matches an even multiple of the fundamental frequency of plasma waves in the FET channel. The noise equivalent power per unit bandwidth of our device is shown to be much smaller than that of a Dyakonov-Shur detector in a wide spectral range.
△ Less
Submitted 2 October, 2013;
originally announced October 2013.
-
Graphene field effect transistors as room-temperature Terahertz detectors
Authors:
L. Vicarelli,
M. S. Vitiello,
D. Coquillat,
A. Lombardo,
A. C. Ferrari,
W. Knap,
M. Polini,
V. Pellegrini,
A. Tredicucci
Abstract:
The unique optoelectronic properties of graphene [1] make it an ideal platform for a variety of photonic applications [2], including fast photodetectors [3], transparent electrodes [4], optical modulators [5], and ultra-fast lasers [6]. Owing to its high carrier mobility, gapless spectrum, and frequency-independent absorption coefficient, it has been recognized as a very promising element for the…
▽ More
The unique optoelectronic properties of graphene [1] make it an ideal platform for a variety of photonic applications [2], including fast photodetectors [3], transparent electrodes [4], optical modulators [5], and ultra-fast lasers [6]. Owing to its high carrier mobility, gapless spectrum, and frequency-independent absorption coefficient, it has been recognized as a very promising element for the development of detectors and modulators operating in the Terahertz (THz) region of the electromagnetic spectrum (wavelengths in the hundreds of micrometers range), which is still severely lacking in terms of solid-state devices. Here we demonstrate efficient THz detectors based on antenna-coupled graphene field-effect transistors (FETs). These exploit the non-linear FET response to the oscillating radiation field at the gate electrode, with contributions of thermoelectric and photoconductive origin. We demonstrate room temperature (RT) operation at 0.3 THz, with noise equivalent power (NEP) levels < 30 nW/Hz^(1/2), showing that our devices are well beyond a proof-of-concept phase and can already be used in a realistic setting, enabling large area, fast imaging of macroscopic samples.
△ Less
Submitted 14 March, 2012;
originally announced March 2012.
-
Lasing in planar semiconductor diodes
Authors:
Giorgio De Simoni,
Lukas Mahler,
Vincenzo Piazza,
Alessandro Tredicucci,
Christine A. Nicoll,
Harvey E. Beere,
David A. Ritchie,
Fabio Beltram
Abstract:
We present a planar laser diode based on a simple fabrication scheme compatible with virtually any geometry accessible by standard semiconductor lithography technique. We show that our lasers exhibit ~1 GHz -3dB-modulation-bandwidth already in this prototypical implementation. Directions for a significant speed increase are discussed.
We present a planar laser diode based on a simple fabrication scheme compatible with virtually any geometry accessible by standard semiconductor lithography technique. We show that our lasers exhibit ~1 GHz -3dB-modulation-bandwidth already in this prototypical implementation. Directions for a significant speed increase are discussed.
△ Less
Submitted 7 November, 2011;
originally announced November 2011.
-
Low Cost Thermopile Detectors for THz Imaging and Sensing
Authors:
F. Voltolina,
A. Tredicucci,
P. Haring Bolivar
Abstract:
We evaluate 2 thermopile sensors as convenient detector options for a modern integrated THz imaging system. Both a commercial single pixel device and a 32x32 pixel FPA are utilized in a simple setup with a single optical element to achieve an outstanding resolution and SNR performance. Either a cryogenically cooled quantum cascade laser (QCL) or a room temperature electronic THz multiplier chain…
▽ More
We evaluate 2 thermopile sensors as convenient detector options for a modern integrated THz imaging system. Both a commercial single pixel device and a 32x32 pixel FPA are utilized in a simple setup with a single optical element to achieve an outstanding resolution and SNR performance. Either a cryogenically cooled quantum cascade laser (QCL) or a room temperature electronic THz multiplier chain is used as source.
△ Less
Submitted 4 March, 2010;
originally announced March 2010.
-
Light-matter excitations in the ultra-strong coupling regime
Authors:
Aji A. Anappara,
Simone De Liberato,
Alessandro Tredicucci,
Cristiano Ciuti,
Giorgio Biasiol,
Lucia Sorba,
Fabio Beltram
Abstract:
In a microcavity, light-matter coupling is quantified by the vacuum Rabi frequency $Ω_R$. When $Ω_R$ is larger than radiative and non-radiative loss rates, the system eigenstates (polaritons) are linear superposition of photonic and electronic excitations, a condition actively investigated in diverse physical implementations. Recently, a quantum electrodynamic regime (ultra-strong coupling) was…
▽ More
In a microcavity, light-matter coupling is quantified by the vacuum Rabi frequency $Ω_R$. When $Ω_R$ is larger than radiative and non-radiative loss rates, the system eigenstates (polaritons) are linear superposition of photonic and electronic excitations, a condition actively investigated in diverse physical implementations. Recently, a quantum electrodynamic regime (ultra-strong coupling) was predicted when $Ω_R$ becomes comparable to the transition frequency. Here we report unambiguous signatures of this regime in a quantum-well intersubband microcavity. Measuring the cavity-polariton dispersion in a room-temperature linear optical experiment, we directly observe the anti-resonant light-matter coupling and the photon-energy renormalization of the vacuum field.
△ Less
Submitted 10 March, 2009; v1 submitted 27 August, 2008;
originally announced August 2008.
-
Design and Simulation of THz Quantum Cascade Lasers
Authors:
R. Koehler,
R. C. Iotti,
A. Tredicucci,
F. Rossi
Abstract:
Strategies and concepts for the design of THz emitters based on the quantum cascade scheme are analyzed and modeled in terms of a fully three-dimensional Monte Carlo approach; this allows for a proper inclusion of both carrier-carrier and carrier-phonon scattering mechanisms. Starting from the simulation of previously published far-infrared emitters, where no population inversion is achieved, tw…
▽ More
Strategies and concepts for the design of THz emitters based on the quantum cascade scheme are analyzed and modeled in terms of a fully three-dimensional Monte Carlo approach; this allows for a proper inclusion of both carrier-carrier and carrier-phonon scattering mechanisms. Starting from the simulation of previously published far-infrared emitters, where no population inversion is achieved, two innovative designs are proposed. The first one follows the well-established chirped-superlattice scheme whereas the second one employs a double-quantum well superlattice to allow energy relaxation through optical phonon emission. For both cases a significant population inversion is predicted at temperatures up to 80 K.
△ Less
Submitted 8 October, 2001;
originally announced October 2001.