Showing 1–5 of 5 results for author: Voltolina, F

Low Cost Thermopile Detectors for THz Imaging and Sensing

Authors: F. Voltolina, A. Tredicucci, P. Haring Bolivar

Abstract: We evaluate 2 thermopile sensors as convenient detector options for a modern integrated THz imaging system. Both a commercial single pixel device and a 32x32 pixel FPA are utilized in a simple setup with a single optical element to achieve an outstanding resolution and SNR performance. Either a cryogenically cooled quantum cascade laser (QCL) or a room temperature electronic THz multiplier chain… ▽ More We evaluate 2 thermopile sensors as convenient detector options for a modern integrated THz imaging system. Both a commercial single pixel device and a 32x32 pixel FPA are utilized in a simple setup with a single optical element to achieve an outstanding resolution and SNR performance. Either a cryogenically cooled quantum cascade laser (QCL) or a room temperature electronic THz multiplier chain is used as source. △ Less

Submitted 4 March, 2010; originally announced March 2010.

Comments: 2 pages, 6 figures, distilled by Acrobat Distiller 7.0.5, IRMMW-THz 2008. 33rd International Conference on. Date:15-19 Sept. 2008

Journal ref: 'Low cost thermopile detectors for THz imaging and sensing'. Infrared, Millimeter and Terahertz Waves, 2008. IRMMW-THz 2008. Pasadena, CA, 15-19 Sept. 2008

Progetto di un detector a camera di ionizzazione per esperimenti SAXS

Authors: Francesco Voltolina

Abstract: The work presented in this Tesi di Laurea arises from a collaboration between the IPL (Image Processing Laboratory) of the Dipartimento di Elettrotecnica, Elettronica ed Informatica (DEEI) at the University of Trieste and the Instrumentation and Detector Laboratory belonging to the ELETTRA Synchrotron Light Source of Trieste. Under the European Contract ERBFMGECT 980104 a project was active at E… ▽ More The work presented in this Tesi di Laurea arises from a collaboration between the IPL (Image Processing Laboratory) of the Dipartimento di Elettrotecnica, Elettronica ed Informatica (DEEI) at the University of Trieste and the Instrumentation and Detector Laboratory belonging to the ELETTRA Synchrotron Light Source of Trieste. Under the European Contract ERBFMGECT 980104 a project was active at ELETTRA with the objective to improve facilities for time resolved small angle X-ray scattering (SAXS) experiments within Europe. Partners of the project were, together with ELETTRA, other large scale facilities like the HASYLAB (Hamburger Synchrotron, Germany), the CCLRC (Daresbury Laboratory, UK), the ESRF (European Synchrotron Radiation Facility in Grenoble, France) and the University of Siegen (Germany). In particular the latest half of the time spent working on this project was based in the Arbeitsgruppe Detektorphysik und Elektronik belonging to the Faculty of Physics at the University of Siegen. △ Less

Submitted 9 February, 2010; originally announced February 2010.

Comments: 162 pages, Tesi di Laurea (Master Thesis), EE, short summary in Italian and Full version in English, October 2004

Imaging with high Dynamic using an Ionization Chamber

Authors: Ralf-Hendrik Menk, Heinz Amenitsch, Fulvia Arfelli, Sigrid Bernstorff, Hans Juergen Besch, Francesco Voltolina

Abstract: In this work a combination of an ionization chamber with one-dimensional spatial resolution and a MicroCAT structure will be presented. The combination between gas gain operations and integrating front-end electronics yields a dynamic range as high as eight to nine orders of magnitude. Therefore this device is well suitable for medical imaging or applications such as small angle x-ray scattering… ▽ More In this work a combination of an ionization chamber with one-dimensional spatial resolution and a MicroCAT structure will be presented. The combination between gas gain operations and integrating front-end electronics yields a dynamic range as high as eight to nine orders of magnitude. Therefore this device is well suitable for medical imaging or applications such as small angle x-ray scattering, where the requirements on the dynamic of the detector are exceptional high. Basically the described detector is an ionization chamber adapted to fan beam geometry with an active area of 192 cm and a pitch of the anode strips of 150 micrometer. In the vertical direction beams as high as 10 mm can be accepted. Every read-out strip is connected to an analogue integrating electronics channel realized in a custom made VLSI chip. A MicroCAT structure utilized as a shielding grid enables frame rates as high as 10kHz. The high dynamic range observed stems from the fact that the MicroCAT enables active electron amplification in the gas. Thus a single photon resolution can be obtained for low photon fluxes even with the integrating electronics. The specialty of this device is that for each photon flux the gas amplification can be adjusted in such a fashion that the maximum DQE value is achieved. △ Less

Submitted 31 January, 2010; originally announced February 2010.

Comments: 7 pages, 12 figures, distilled by OpenOffice.org 3.1

Journal ref: Medical Imaging 2003: Physics of Medical Imaging. Edited by Yaffe, Martin J.; Antonuk, Larry E. Proceedings of the SPIE, Volume 5030, pp. 810-817 (2003)

A high dynamic Micro Strips Ionization Chamber featuring Embedded Multi DSP Processing

Authors: Francesco Voltolina, Ralf H. Menk, Sergio Carrato

Abstract: An X-ray detector will be presented that is the combination of a segmented ionization chamber featuring one-dimensional spatial resolution integrated with an intelligent ADC front-end, multi DSP processing and embedded PC platform. This detector is optimized to fan beam geometry with an active area of 192 mm (horizontal) and a vertical acceptance of 6 mm. Spatial resolution is obtained by subdiv… ▽ More An X-ray detector will be presented that is the combination of a segmented ionization chamber featuring one-dimensional spatial resolution integrated with an intelligent ADC front-end, multi DSP processing and embedded PC platform. This detector is optimized to fan beam geometry with an active area of 192 mm (horizontal) and a vertical acceptance of 6 mm. Spatial resolution is obtained by subdividing the anode into readout strips, having pitch of 150 micrometers, which are connected to 20 custom made integrating VLSI chips (each capable of 64-channel read-out and multiplexing) and read out by 14 bits 10 MHz ADCs and fast adaptive PGAs into DSP boards. A bandwidth reaching 3.2Gbit/s of raw data, generated from the real time sampling of the 1280 micro strips, is cascaded processed with FPGA and DSP to allow data compression resulting in several days of uninterrupted acquisition capability. Fast acquisition rates reaching 10 kHz are allowed due to the MicroCAT structure utilized not only as a shielding grid in ionization chamber mode but also to provide active electron amplification in the gas. △ Less

Submitted 25 January, 2010; originally announced January 2010.

Comments: 5 pages, 7 figures, distilled by AFPL Ghostscript 7.04

Journal ref: Nuclear Science Symposium Conference Record, 2004 IEEE Volume 7, Issue, 16-22 Oct. 2004 Page(s): 4685 - 4689 Vol. 7

A quasi-commercial Terahertz detector based on MIR thermopiles

Authors: F. Voltolina, U. Dillner, E. Kessler, P. Haring Bolivar

Abstract: Integrating a thermopile with a low power operational amplifier is an effective and cost-efficient approach to obtain a high performance compact Terahertz power detector. Here we present the development of such an integrated detector, including the fundamental building blocks, the final realization and related characterization. The responsivity and bandwidth of the detector are measured in a sta… ▽ More Integrating a thermopile with a low power operational amplifier is an effective and cost-efficient approach to obtain a high performance compact Terahertz power detector. Here we present the development of such an integrated detector, including the fundamental building blocks, the final realization and related characterization. The responsivity and bandwidth of the detector are measured in a standard THz CW setup consisting of a closed cycle helium cryostat and a Quantum Cascade Laser (QCL). The predicted results are compared with measured data, showing a good agreement. Advantages of existing Golay cell THz detectors in both sensitivity and NEP figure vanish, in practical use, due to the enormous increment in dynamic range provided by the linear operation of the thermopile up to 100 mW of incident power while offering a NEP below 1nW/sqrt(Hz) and a -3dB bandwidth of 6,8 Hz. △ Less

Submitted 24 January, 2010; originally announced January 2010.

Comments: 6 pages, 9 pictures, distilled with AFPL Ghostscript 7.04

Journal ref: Voltolina, F.; Dillner, U.; Kessler, E.; Bolívar, P. H. Realization of a quasi-commercial Terahertz detector. The 13th European Microwave Week, 2010. EuMW2010. Paris, France, 26 Sept.- 1 Oct. 2010