Showing 1–7 of 7 results for author: Nathan, R S

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

Authors: The International Pulsar Timing Array Collaboration, G. Agazie, J. Antoniadis, A. Anumarlapudi, A. M. Archibald, P. Arumugam, S. Arumugam, Z. Arzoumanian, J. Askew, S. Babak, M. Bagchi, M. Bailes, A. -S. Bak Nielsen, P. T. Baker, C. G. Bassa, A. Bathula, B. Bécsy, A. Berthereau, N. D. R. Bhat, L. Blecha, M. Bonetti, E. Bortolas, A. Brazier, P. R. Brook, M. Burgay , et al. (220 additional authors not shown)

Abstract: The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA… ▽ More The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 21 pages, 9 figures, submitted to ApJ

The Parkes Pulsar Timing Array Third Data Release

Authors: Andrew Zic, Daniel J. Reardon, Agastya Kapur, George Hobbs, Rami Mandow, Małgorzata Curyło, Ryan M. Shannon, Jacob Askew, Matthew Bailes, N. D. Ramesh Bhat, Andrew Cameron, Zu-Cheng Chen, Shi Dai, Valentina Di Marco, Yi Feng, Matthew Kerr, Atharva Kulkarni, Marcus E. Lower, Rui Luo, Richard N. Manchester, Matthew T. Miles, Rowina S. Nathan, Stefan Osłowski, Axl F. Rogers, Christopher J. Russell , et al. (9 additional authors not shown)

Abstract: We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily ob… ▽ More We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release. △ Less

Submitted 17 October, 2023; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 15 pages, 6 figures. Accepted for publication in PASA

The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array

Authors: Daniel J. Reardon, Andrew Zic, Ryan M. Shannon, Valentina Di Marco, George B. Hobbs, Agastya Kapur, Marcus E. Lower, Rami Mandow, Hannah Middleton, Matthew T. Miles, Axl F. Rogers, Jacob Askew, Matthew Bailes, N. D. Ramesh Bhat, Andrew Cameron, Matthew Kerr, Atharva Kulkarni, Richard N. Manchester, Rowina S. Nathan, Christopher J. Russell, Stefan Osłowski, Xing-Jiang Zhu

Abstract: The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravita… ▽ More The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 18 pages, 10 figures. Accepted for publication in ApJL

Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array

Authors: Daniel J. Reardon, Andrew Zic, Ryan M. Shannon, George B. Hobbs, Matthew Bailes, Valentina Di Marco, Agastya Kapur, Axl F. Rogers, Eric Thrane, Jacob Askew, N. D. Ramesh Bhat, Andrew Cameron, Małgorzata Curyło, William A. Coles, Shi Dai, Boris Goncharov, Matthew Kerr, Atharva Kulkarni, Yuri Levin, Marcus E. Lower, Richard N. Manchester, Rami Mandow, Matthew T. Miles, Rowina S. Nathan, Stefan Osłowski , et al. (4 additional authors not shown)

Abstract: Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of t… ▽ More Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 19 pages, 10 figures, Accepted for publication in ApJL

Improving pulsar-timing solutions through dynamic pulse fitting

Authors: Rowina S. Nathan, Matthew T. Miles, Gregory Ashton, Paul D. Lasky, Eric Thrane, Daniel J. Reardon, Ryan M. Shannon, Andrew D. Cameron

Abstract: Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing met… ▽ More Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing method that fits each observing epoch using basis functions. By fitting each epoch separately, we allow for the evolution of the pulse shape epoch to epoch. We apply our method to PSR J1103$-$5403 and demonstrate that it undergoes mode changing, making it the fourth millisecond pulsar to exhibit such behaviour. Our method, which is able to identify and time a single mode, yields a timing solution with a root-mean-square error of 1.343 $μ\mathrm{s}$, a factor of 1.78 improvement over template fitting on both modes. In addition, the white-noise amplitude is reduced 4.3 times, suggesting that fitting the full data set causes the mode changing to be incorrectly classified as white noise. This reduction in white noise boosts the signal-to-noise ratio of a gravitational-wave background signal for this particular pulsar by 32%. We discuss the possible applications for this method of timing to study pulsar magnetospheres and further improve the sensitivity of searches for nanohertz gravitational waves. △ Less

Submitted 31 May, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: Accepted in MNRAS, 8 pages, 8 figures

Missed opportunities: GRB 211211A and the case for continual gravitational-wave coverage with a single observatory

Authors: Nikhil Sarin, Paul D. Lasky, Rowina S. Nathan

Abstract: Gamma-ray burst GRB 211211A may have been the result of a neutron star merger at $\approx350$ Mpc. However, none of the LIGO-Virgo detectors were operating at the time. We show that the gravitational-wave signal from a \grb-like binary neutron star inspiral in the next LIGO-Virgo-KAGRA observing run (O4) would be below the conventional detection threshold, however a coincident gamma-ray burst obse… ▽ More Gamma-ray burst GRB 211211A may have been the result of a neutron star merger at $\approx350$ Mpc. However, none of the LIGO-Virgo detectors were operating at the time. We show that the gravitational-wave signal from a \grb-like binary neutron star inspiral in the next LIGO-Virgo-KAGRA observing run (O4) would be below the conventional detection threshold, however a coincident gamma-ray burst observation would provide necessary information to claim a statistically-significant multimessenger observation. We calculate that with O4 sensitivity, approximately $11\%$ of gamma-ray bursts within 600 Mpc will produce a confident association between the gravitational-wave binary neutron star inspiral signature and the prompt gamma-ray signature. This corresponds to a coincident detection rate of $\unit[0.22^{+8.3}_{-0.22}]{yr^{-1}}$, where the uncertainties are the 90\% confidence intervals arising from uncertainties in the absolute merger rate, beaming and jet-launching fractions. These increase to approximately $34\%$ and $\unit[0.71^{+26.8}_{-0.70}]{yr^{-1}}$ with proposed O5 sensitivity. We show that the above numbers do not depend significantly on the number of gravitational-wave observatories operating with the specific sensitivity. That is, the number of confident joint gamma-ray burst and gravitational-wave detections is only marginally improved with two or three detectors operating compared to a single detector. It is therefore worth considering whether one detector with sufficient sensitivity (post O4) should remain in sky-watch mode at all times to elucidate the true nature of GRB 211211A-like events, a proposal we discuss in detail. △ Less

Submitted 22 November, 2022; v1 submitted 26 October, 2022; originally announced October 2022.

Comments: Accepted in MNRAS, 8 pages 2 figures

Neutron Star Extreme Matter Observatory: A kilohertz-band gravitational-wave detector in the global network

Authors: K. Ackley, V. B. Adya, P. Agrawal, P. Altin, G. Ashton, M. Bailes, E. Baltinas, A. Barbuio, D. Beniwal, C. Blair, D. Blair, G. N. Bolingbroke, V. Bossilkov, S. Shachar Boublil, D. D. Brown, B. J. Burridge, J. Calderon Bustillo, J. Cameron, H. Tuong Cao, J. B. Carlin, S. Chang, P. Charlton, C. Chatterjee, D. Chattopadhyay, X. Chen , et al. (139 additional authors not shown)

Abstract: Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provid… ▽ More Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2-4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a neutron star extreme matter observatory (NEMO): a gravitational-wave interferometer optimized to study nuclear physics with merging neutron stars. The concept uses high circulating laser power, quantum squeezing and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above one kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year, and potentially allows for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica. △ Less

Submitted 5 November, 2020; v1 submitted 6 July, 2020; originally announced July 2020.

Comments: Accepted for publication in PASA

Journal ref: PASA (2020) 37, e047