-
An insight into chromatic behaviour of jitter in pulsars and its modelling: A case study of PSR J0437$-$4715
Authors:
A. D. Kulkarni,
R. M. Shannon,
D. J. Reardon,
M. T. Miles,
M. Bailes,
M. Shamohammadi
Abstract:
Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of…
▽ More
Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of interest such as nanohertz-frequency gravitational waves. Current white noise models used in pulsar timing analyses attempt to account for this, assuming complete correlation of uncertainties through the arrival times collected in a unique observation and no frequency dependence of jitter (which corresponds to a rank-one covariance matrix). However, previous studies show that the brightest millisecond pulsar at decimetre wavelengths, PSR J0437$-$4715, shows decorrelation and frequency dependence of jitter noise. Here we present a detailed study of the decorrelation of jitter noise in PSR J0437$-$4715 and implement a new technique to model it. We show that the rate of decorrelation due to jitter can be expressed as a power-law in frequency. We analyse the covariance matrix associated with the jitter noise process and find that a higher-rank-approximation is essential to account for the decorrelation and to account for frequency dependence of jitter noise. We show that the use of this novel method significantly improves the estimation of other chromatic noise parameters such as dispersion measure variations. However, we find no significant improvement in errors and estimation of other timing model parameters suggesting that current methods are not biased for other parameters, for this pulsar due to this misspecification. We show that pulse energy variations show a similar decorrelation to the jitter noise, indicating a common origin for both observables.
△ Less
Submitted 8 January, 2024; v1 submitted 7 January, 2024;
originally announced January 2024.
-
Flux density monitoring of 89 millisecond pulsars with MeerKAT
Authors:
P. Gitika,
M. Bailes,
R. M. Shannon,
D. J. Reardon,
A. D. Cameron,
M. Shamohammadi,
M. T. Miles,
C. M. L. Flynn,
A. Corongiu,
M. Kramer
Abstract:
We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation i…
▽ More
We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation indices, their average and peak-to-median flux densities in each sub-band, as well as their mean spectral indices across the entire frequency range. We find that the vast majority of the MSPs have spectra that are well described by a simple power law, with a mean spectral index of -1.86(6). Using the temporal variation of the flux densities we measured the structure functions and determined the refractive scintillation timescale for seven. The structure functions provide strong evidence that the intrinsic radio luminosities of MSPs are stable. As a population, the average modulation index at 20 cm wavelengths peaks near unity at dispersion measures (DMs) of $\sim$20 pc cm$^{-3}$ and by a DM of 100 pc cm$^{-3}$ are closer to 0.2, due to refractive scintillation. We find that timing arrays can improve their observing efficiency by reacting to scintillation maxima, and that 20 cm FRB surveys should prioritise highly scintillating mid-latitude regions of the Galactic sky where they will find $\sim$30% more events and bursts at greater distances.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
The Parkes Pulsar Timing Array Third Data Release
Authors:
Andrew Zic,
Daniel J. Reardon,
Agastya Kapur,
George Hobbs,
Rami Mandow,
Małgorzata Curyło,
Ryan M. Shannon,
Jacob Askew,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew Cameron,
Zu-Cheng Chen,
Shi Dai,
Valentina Di Marco,
Yi Feng,
Matthew Kerr,
Atharva Kulkarni,
Marcus E. Lower,
Rui Luo,
Richard N. Manchester,
Matthew T. Miles,
Rowina S. Nathan,
Stefan Osłowski,
Axl F. Rogers,
Christopher J. Russell
, et al. (9 additional authors not shown)
Abstract:
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily ob…
▽ More
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release.
△ Less
Submitted 17 October, 2023; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array
Authors:
Daniel J. Reardon,
Andrew Zic,
Ryan M. Shannon,
Valentina Di Marco,
George B. Hobbs,
Agastya Kapur,
Marcus E. Lower,
Rami Mandow,
Hannah Middleton,
Matthew T. Miles,
Axl F. Rogers,
Jacob Askew,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew Cameron,
Matthew Kerr,
Atharva Kulkarni,
Richard N. Manchester,
Rowina S. Nathan,
Christopher J. Russell,
Stefan Osłowski,
Xing-Jiang Zhu
Abstract:
The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravita…
▽ More
The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array
Authors:
Daniel J. Reardon,
Andrew Zic,
Ryan M. Shannon,
George B. Hobbs,
Matthew Bailes,
Valentina Di Marco,
Agastya Kapur,
Axl F. Rogers,
Eric Thrane,
Jacob Askew,
N. D. Ramesh Bhat,
Andrew Cameron,
Małgorzata Curyło,
William A. Coles,
Shi Dai,
Boris Goncharov,
Matthew Kerr,
Atharva Kulkarni,
Yuri Levin,
Marcus E. Lower,
Richard N. Manchester,
Rami Mandow,
Matthew T. Miles,
Rowina S. Nathan,
Stefan Osłowski
, et al. (4 additional authors not shown)
Abstract:
Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of t…
▽ More
Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Toward robust detections of nanohertz gravitational waves
Authors:
Valentina Di Marco,
Andrew Zic,
Matthew T. Miles,
Daniel J. Reardon,
Eric Thrane,
Ryan M. Shannon
Abstract:
The recent observation of a common red-noise process in pulsar timing arrays (PTAs) suggests that the detection of nanohertz gravitational waves might be around the corner. However, in order to confidently attribute this red process to gravitational waves, one must observe the Hellings-Downs curve -- the telltale angular correlation function associated with a gravitational-wave background. This ef…
▽ More
The recent observation of a common red-noise process in pulsar timing arrays (PTAs) suggests that the detection of nanohertz gravitational waves might be around the corner. However, in order to confidently attribute this red process to gravitational waves, one must observe the Hellings-Downs curve -- the telltale angular correlation function associated with a gravitational-wave background. This effort is complicated by the complex modelling of pulsar noise. Without proper care, mis-specified noise models can lead to false-positive detections. Background estimation using bootstrap methods such as sky scrambles and phase shifts, which use the data to characterize the noise, are therefore important tools for assessing significance. We investigate the ability of current PTA experiments to estimate their background with "quasi-independent" scrambles -- characterized by a statistical "match" below the fiducial value: $|M|<0.1$. We show that sky scrambling is affected by "saturation" after $O(10)$ quasi-independent realizations; subsequent scrambles are no longer quasi-independent. We show phase scrambling saturates after $O(100)$ quasi-independent realizations. With so few independent scrambles, it is difficult to make reliable statements about the $\gtrsim 5 σ$ tail of the null distribution of the detection statistic. We discuss various methods by which one may increase the number of independent scrambles. We also consider an alternative approach wherein one re-frames the background estimation problem so that the significance is calculated using statistically dependent scrambles. The resulting $p$-value is in principle well-defined but may be susceptible to failure if assumptions about the data are incorrect.
△ Less
Submitted 9 August, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Improving pulsar-timing solutions through dynamic pulse fitting
Authors:
Rowina S. Nathan,
Matthew T. Miles,
Gregory Ashton,
Paul D. Lasky,
Eric Thrane,
Daniel J. Reardon,
Ryan M. Shannon,
Andrew D. Cameron
Abstract:
Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing met…
▽ More
Precision pulsar timing is integral to the detection of the nanohertz stochastic gravitational-wave background as well as understanding the physics of neutron stars. Conventional pulsar timing often uses fixed time and frequency-averaged templates to determine the pulse times of arrival, which can lead to reduced accuracy when the pulse profile evolves over time. We illustrate a dynamic timing method that fits each observing epoch using basis functions. By fitting each epoch separately, we allow for the evolution of the pulse shape epoch to epoch. We apply our method to PSR J1103$-$5403 and demonstrate that it undergoes mode changing, making it the fourth millisecond pulsar to exhibit such behaviour. Our method, which is able to identify and time a single mode, yields a timing solution with a root-mean-square error of 1.343 $μ\mathrm{s}$, a factor of 1.78 improvement over template fitting on both modes. In addition, the white-noise amplitude is reduced 4.3 times, suggesting that fitting the full data set causes the mode changing to be incorrectly classified as white noise. This reduction in white noise boosts the signal-to-noise ratio of a gravitational-wave background signal for this particular pulsar by 32%. We discuss the possible applications for this method of timing to study pulsar magnetospheres and further improve the sensitivity of searches for nanohertz gravitational waves.
△ Less
Submitted 31 May, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
The MeerKAT Pulsar Timing Array: First Data Release
Authors:
Matthew T. Miles,
Ryan M. Shannon,
Matthew Bailes,
Daniel J. Reardon,
Michael J. Keith,
Andrew D. Cameron,
Aditya Parthasarathy,
Mohsen Shamohammadi,
Renee Spiewak,
Willem van Straten,
Sarah Buchner,
Fernando Camilo,
Marisa Geyer,
Aris Karastergiou,
Michael Kramer,
Maciej Serylak,
Gilles Theureau,
Vivek Venkatraman Krishnan
Abstract:
We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsa…
▽ More
We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope, and operates with a typical observing cadence of two weeks using the L-band receiver that records data from 856-1712 MHz. We provide a comprehensive description of the observing system, software, and pipelines used and developed for the MeerTime project. The data products made available as part of this data release are from the 78 pulsars that had at least $30$ observations between the start of the MeerTime programme in February 2019 and October 2021. These include both sub-banded and band-averaged arrival times, as well as the initial timing ephemerides, noise models, and the frequency-dependent standard templates (portraits) used to derive pulse arrival times. After accounting for detected noise processes in the data, the frequency-averaged residuals of $67$ of the pulsars achieved a root-mean-square residual precision of $< 1 μ\rm{s}$. We also present a novel recovery of the clock correction waveform solely from pulsar timing residuals, and an exploration into preliminary findings of interest to the international pulsar timing community. The arrival times, standards and full Stokes parameter calibrated pulsar timing archives are publicly available.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Searches for Shapiro delay in seven binary pulsars using the MeerKAT telescope
Authors:
Mohsen Shamohammadi,
Matthew Bailes,
Paulo C. C. Freire,
Aditya Parthasarathy,
Daniel J. Reardon,
Ryan M. Shannon,
Vivek Venkatraman Krishnan,
Miquel C. i. Bernadich,
Andrew D. Cameron,
David J. Champion,
Alessandro Corongiu,
Christopher Flynn,
Marisa Geyer,
Michael Kramer,
Matthew T. Miles,
Andrea Possenti,
Renee Spiewak
Abstract:
Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope th…
▽ More
Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope that show evidence of Shapiro delay: PSRs~J0101$-$6422, J1101$-$6424, J1125$-$6014, J1514$-$4946, J1614$-$2230, J1732$-$5049, and J1909$-$3744. Evidence for Shapiro delay was found in all of the systems, and for three the orientations and data quality enabled strong constraints on their orbital inclinations and component masses. For PSRs~J1125$-$6014, J1614$-$2230 and J1909$-$3744, we determined pulsar masses to be $M_{\rm p} = 1.68\pm 0.17 \, {\rm M_{\odot}} $, $1.94\pm 0.03 \, {\rm M_{\odot}} $ and $1.45 \pm 0.03 \, {\rm M_{\odot}}$, and companion masses to be $M_{\rm c} = 0.33\pm 0.02 \, {\rm M_{\odot}} $, $0.495\pm 0.005 \, {\rm M_{\odot}} $ and $0.205 \pm 0.003 \, {\rm M_{\odot}}$, respectively. This provides the first independent confirmation of PSR~J1614$-$2230's mass, one of the highest known. The Shapiro delays measured for PSRs~J0101$-$6422, J1101$-$6424, J1514$-$4946, and J1732$-$5049 were only weak, and could not provide interesting component mass limits. Despite a large number of millisecond pulsars being routinely timed, relatively few have accurate masses via Shapiro delays. We use simulations to show that this is expected, and provide a formula for observers to assess how accurately a pulsar mass can be determined. We also discuss the observed correlation between pulsar companion masses and spin period, and the anti-correlation between recycled pulsar mass and their companion masses.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Wideband timing of the Parkes Pulsar Timing Array UWL data
Authors:
Małgorzata Curyło,
Timothy T. Pennucci,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew D. Cameron,
Shi Dai,
George Hobbs,
Agastya Kapur,
Richard N. Manchester,
Rami Mandow,
Matthew T. Miles,
Christopher J. Russell,
Daniel J. Reardon,
Ryan M. Shannon,
Renée Spiewak,
Andrew Zic,
Xing-Jiang Zhu
Abstract:
In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compa…
▽ More
In 2018 an ultra-wide-bandwidth low-frequency (UWL) receiver was installed on the 64-m Parkes Radio Telescope enabling observations with an instantaneous frequency coverage from 704 to 4032 MHz. Here, we present the analysis of a three-year data set of 35 millisecond pulsars observed with the UWL by the Parkes Pulsar Timing Array (PPTA), using wideband timing methods. The two key differences compared to typical narrow-band methods are, firstly, generation of two-dimensional templates accounting for pulse shape evolution with frequency and, secondly, simultaneous measurements of the pulse time-of-arrival (ToA) and dispersion measure (DM). This is the first time that wideband timing has been applied to a uniform data set collected with a single large-fractional bandwidth receiver, for which such techniques were originally developed. As a result of our study, we present a set of profile evolution models and new timing solutions including initial noise analysis. Precision of our ToA and DM measurements is in the range of 0.005 $-$ 2.08 $μ$s and (0.043$-$14.24)$\times10^{-4}$ cm$^{-3}$ pc, respectively, with 94% of the pulsars achieving a median ToA uncertainty of less than 1 $μ$s.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
The MeerTime Pulsar Timing Array -- A Census of Emission Properties and Timing Potential
Authors:
R. Spiewak,
M. Bailes,
M. T. Miles,
A. Parthasarathy,
D. J. Reardon,
M. Shamohammadi,
R. M. Shannon,
N. D. R. Bhat,
S. Buchner,
A. D. Cameron,
F. Camilo,
M. Geyer,
S. Johnston,
A. Karastergiou,
M. Keith,
M. Kramer,
M. Serylak,
W. van Straten,
G. Theureau,
V. Venkatraman Krishnan
Abstract:
MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing A…
▽ More
MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing Array (IPTA). In order to plan for the remainder of the programme and to use the allocated time most efficiently, we have conducted an initial census with the MeerKAT "L-band" receiver of 189 MSPs visible to MeerKAT and here present their dispersion measures, polarization profiles, polarization fractions, rotation measures, flux density measurements, spectral indices, and timing potential. As all of these observations are taken with the same instrument (which uses coherent dedispersion, interferometric polarization calibration techniques, and a uniform flux scale), they present an excellent resource for population studies. We used wideband pulse portraits as timing standards for each MSP and demonstrated that the MeerTime Pulsar Timing Array (MPTA) can already contribute significantly to the IPTA as it currently achieves better than 1 $μ$s timing accuracy on 89 MSPs (observed with fortnightly cadence). By the conclusion of the initial five-year MeerTime programme in July 2024, the MPTA will be extremely significant in global efforts to detect the gravitational wave background with a contribution to the detection statistic comparable to other long-standing timing programmes.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Mode changing in J1909$-$3744: the most precisely timed pulsar
Authors:
Matthew T. Miles,
Ryan M. Shannon,
Matthew Bailes,
Daniel J. Reardon,
Sarah Buchner,
Hannah Middleton,
Renee Spiewak
Abstract:
We present baseband radio observations of the millisecond pulsar J1909$-$3744, the most precisely timed pulsar, using the MeerKAT telescope as part of the MeerTime pulsar timing array campaign. During a particularly bright scintillation event the pulsar showed strong evidence of pulse mode changing, among the first millisecond pulsars and the shortest duty cycle millisecond pulsar to do so. Two mo…
▽ More
We present baseband radio observations of the millisecond pulsar J1909$-$3744, the most precisely timed pulsar, using the MeerKAT telescope as part of the MeerTime pulsar timing array campaign. During a particularly bright scintillation event the pulsar showed strong evidence of pulse mode changing, among the first millisecond pulsars and the shortest duty cycle millisecond pulsar to do so. Two modes appear to be present, with the weak (lower signal-to-noise ratio) mode arriving $9.26$ $\pm 3.94$ $μ$s earlier than the strong counterpart. Further, we present a new value of the jitter noise for this pulsar of $8.20 \pm 0.14$ ns in one hour, finding it to be consistent with previous measurements taken with the MeerKAT ($9 \pm 3$ ns) and Parkes ($8.6 \pm 0.8$ ns) telescopes, but inconsistent with the previously most precise measurement taken with the Green Bank telescope ($14 \pm 0.5$ ns). Timing analysis on the individual modes is carried out for this pulsar, and we find an approximate $10\%$ improvement in the timing precision is achievable through timing the strong mode only as opposed to the full sample of pulses. By forming a model of the average pulse from templates of the two modes, we time them simultaneously and demonstrate that this timing improvement can also be achieved in regular timing observations. We discuss the impact an improvement of this degree on this pulsar would have on searches for the stochastic gravitational wave background, as well as the impact of a similar improvement on all MeerTime PTA pulsars.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array
Authors:
Boris Goncharov,
R. M. Shannon,
D. J. Reardon,
G. Hobbs,
A. Zic,
M. Bailes,
M. Curylo,
S. Dai,
M. Kerr,
M. E. Lower,
R. N. Manchester,
R. Mandow,
H. Middleton,
M. T. Miles,
A. Parthasarathy,
E. Thrane,
N. Thyagarajan,
X. Xue,
X. J. Zhu,
A. D. Cameron,
Y. Feng,
R. Luo,
C. J. Russell,
J. Sarkissian,
R. Spiewak
, et al. (4 additional authors not shown)
Abstract:
A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Wa…
▽ More
A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.
△ Less
Submitted 11 August, 2021; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Neutron Star Extreme Matter Observatory: A kilohertz-band gravitational-wave detector in the global network
Authors:
K. Ackley,
V. B. Adya,
P. Agrawal,
P. Altin,
G. Ashton,
M. Bailes,
E. Baltinas,
A. Barbuio,
D. Beniwal,
C. Blair,
D. Blair,
G. N. Bolingbroke,
V. Bossilkov,
S. Shachar Boublil,
D. D. Brown,
B. J. Burridge,
J. Calderon Bustillo,
J. Cameron,
H. Tuong Cao,
J. B. Carlin,
S. Chang,
P. Charlton,
C. Chatterjee,
D. Chattopadhyay,
X. Chen
, et al. (139 additional authors not shown)
Abstract:
Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provid…
▽ More
Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly-rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2-4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a neutron star extreme matter observatory (NEMO): a gravitational-wave interferometer optimized to study nuclear physics with merging neutron stars. The concept uses high circulating laser power, quantum squeezing and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above one kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year, and potentially allows for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica.
△ Less
Submitted 5 November, 2020; v1 submitted 6 July, 2020;
originally announced July 2020.
-
Discovery of s-process enhanced stars in the LAMOST survey
Authors:
Brodie J Norfolk,
Andrew R Casey,
Amanda I Karakas,
Matthew T Miles,
Alex J Kemp,
Kevin C Schlaufman,
Melissa Ness,
Anna Y Q Ho,
John C Lattanzio,
Alexander P Ji
Abstract:
Here we present the discovery of 895 s-process-rich candidates from 454,180 giant stars observed by the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST) using a data-driven approach. This sample constitutes the largest number of s-process enhanced stars ever discovered. Our sample includes 187 s-process-rich candidates that are enhanced in both barium and strontium, 49 stars with…
▽ More
Here we present the discovery of 895 s-process-rich candidates from 454,180 giant stars observed by the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST) using a data-driven approach. This sample constitutes the largest number of s-process enhanced stars ever discovered. Our sample includes 187 s-process-rich candidates that are enhanced in both barium and strontium, 49 stars with significant barium enhancement only and 659 stars that show only a strontium enhancement. Most of the stars in our sample are in the range of effective temperature and log g typical of red giant branch (RGB) populations, which is consistent with our observational selection bias towards finding RGB stars. We estimate that only a small fraction (0.5 per cent) of binary configurations are favourable for s-process enriched stars. The majority of our s-process-rich candidates (95 per cent) show strong carbon enhancements, whereas only five candidates (less than 3 percent) show evidence of sodium enhancement. Our kinematic analysis reveals that 97 percent of our sample are disc stars, with the other 3 percent showing velocities consistent with the Galactic halo. The scaleheight of the disc is estimated to be zh=0.634kpc, comparable with values in the literature. A comparison with the yields from asymptotic giant branch (AGB) models suggests that the main neutron source responsible for the Ba and Sr enhancements is the 13C(alpha,n)16O reaction. We conclude that the s-process-rich candidates may have received their overabundances via mass transfer from a previous ABG companion with an initial mass in the range 1-3Msun.
△ Less
Submitted 31 October, 2019;
originally announced November 2019.
-
On the discovery of K-enhanced and possibly Mg-depleted stars throughout the Milky Way
Authors:
Alex J. Kemp,
Andrew R. Casey,
Matthew T. Miles,
Brodie J. Norfolk,
John C. Lattanzio,
Amanda I. Karakas,
Kevin C. Schlaufman,
Anna Y. Q. Ho,
Christopher A. Tout,
Melissa Ness,
Alexander P. Ji
Abstract:
Stars with unusual elemental abundances offer clues about rare astrophysical events or nucleosynthetic pathways. Stars with significantly depleted magnesium and enhanced potassium ([Mg/Fe] < -0.5; [K/Fe] > 1) have to date only been found in the massive globular cluster NGC 2419 and, to a lesser extent, NGC 2808. The origin of this abundance signature remains unknown, as does the reason for its app…
▽ More
Stars with unusual elemental abundances offer clues about rare astrophysical events or nucleosynthetic pathways. Stars with significantly depleted magnesium and enhanced potassium ([Mg/Fe] < -0.5; [K/Fe] > 1) have to date only been found in the massive globular cluster NGC 2419 and, to a lesser extent, NGC 2808. The origin of this abundance signature remains unknown, as does the reason for its apparent exclusivity to these two globular clusters. Here we present 112 field stars, identified from 454,180 LAMOST giants, that show significantly enhanced [K/Fe] and possibly depleted [Mg/Fe] abundance ratios. Our sample spans a wide range of metallicities (-1.5 < [Fe/H] < 0.3), yet none show abundance ratios of [K/Fe] or [Mg/Fe] that are as extreme as those observed in NGC 2419. If confirmed, the identified sample of stars represents evidence that the nucleosynthetic process producing the anomalous abundances ratios of [K/Fe] and [Mg/Fe] probably occurs at a wide range of metallicities. This would suggest that pollution scenarios that are limited to early epochs (such as Population III supernovae) are an unlikely explanation, although they cannot be ruled out entirely. This sample is expected to help guide modelling attempts to explain the origin of the Mg-K abundance signature.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.