-
The neutron star mass, distance, and inclination from precision timing of the brilliant millisecond pulsar J0437$-$4715
Authors:
Daniel J. Reardon,
Matthew Bailes,
Ryan M. Shannon,
Chris Flynn,
Jacob Askew,
N. D. Ramesh Bhat,
Zu-Cheng Chen,
Małgorzata Curyło,
Yi Feng,
George B. Hobbs,
Agastya Kapur,
Matthew Kerr,
Xiaojin Liu,
Richard N. Manchester,
Rami Mandow,
Saurav Mishra,
Christopher J. Russell,
Mohsen Shamohammadi,
Lei Zhang,
Andrew Zic
Abstract:
The observation of neutron stars enables the otherwise impossible study of fundamental physical processes. The timing of binary radio pulsars is particularly powerful, as it enables precise characterization of their (three-dimensional) positions and orbits. PSR~J0437$-$4715 is an important millisecond pulsar for timing array experiments and is also a primary target for the Neutron Star Interior Co…
▽ More
The observation of neutron stars enables the otherwise impossible study of fundamental physical processes. The timing of binary radio pulsars is particularly powerful, as it enables precise characterization of their (three-dimensional) positions and orbits. PSR~J0437$-$4715 is an important millisecond pulsar for timing array experiments and is also a primary target for the Neutron Star Interior Composition Explorer (NICER). The main aim of the NICER mission is to constrain the neutron star equation of state by inferring the compactness ($M_p/R$) of the star. Direct measurements of the mass $M_p$ from pulsar timing therefore substantially improve constraints on the radius $R$ and the equation of state. Here we use observations spanning 26 years from Murriyang, the 64-m Parkes radio telescope, to improve the timing model for this pulsar. Among the new precise measurements are the pulsar mass $M_p=1.418\pm 0.044$ $M_{\odot}$, distance $D=156.96 \pm 0.11$ pc, and orbital inclination angle $i=137.506 \pm 0.016^\circ$, which can be used to inform the X-ray pulse profile models inferred from NICER observations. We demonstrate that these results are consistent between multiple data sets from the Parkes Pulsar Timing Array (PPTA), each modeled with different noise assumptions. Using the longest available PPTA data set, we measure an apparent second derivative of the pulsar spin frequency and discuss how this can be explained either by kinematic effects due to the proper motion and radial velocity of the pulsar or excess low-frequency noise such as a gravitational-wave background.
△ Less
Submitted 30 July, 2024; v1 submitted 9 July, 2024;
originally announced July 2024.
-
MeerKAT Pulsar Timing Array parallaxes and proper motions
Authors:
Mohsen Shamohammadi,
Matthew Bailes,
Christopher Flynn,
Daniel J. Reardon,
Ryan M. Shannon,
Sarah Buchner,
Andrew D. Cameron,
Fernando Camilo,
Alessandro Coronigu,
Marisa Geyer,
Michael Kramer,
Matthew Miles,
Renee Spiewak
Abstract:
We have determined positions, proper motions, and parallaxes of $77$ millisecond pulsars (MSPs) from $\sim3$ years of MeerKAT radio telescope observations. Our timing and noise analyses enable us to measure $35$ significant parallaxes ($12$ of them for the first time) and $69$ significant proper motions. Eight pulsars near the ecliptic have an accurate proper motion in ecliptic longitude only. PSR…
▽ More
We have determined positions, proper motions, and parallaxes of $77$ millisecond pulsars (MSPs) from $\sim3$ years of MeerKAT radio telescope observations. Our timing and noise analyses enable us to measure $35$ significant parallaxes ($12$ of them for the first time) and $69$ significant proper motions. Eight pulsars near the ecliptic have an accurate proper motion in ecliptic longitude only. PSR~J0955$-$6150 has a good upper limit on its very small proper motion ($<$0.4 mas yr$^{-1}$). We used pulsars with accurate parallaxes to study the MSP velocities. This yields $39$ MSP transverse velocities, and combined with MSPs in the literature (excluding those in Globular Clusters) we analyse $66$ MSPs in total. We find that MSPs have, on average, much lower velocities than normal pulsars, with a mean transverse velocity of only $78(8)$ km s$^{-1}$ (MSPs) compared with $246(21)$ km s$^{-1}$ (normal pulsars). We found no statistical differences between the velocity distributions of isolated and binary millisecond pulsars. From Galactocentric cylindrical velocities of the MSPs, we derive 3-D velocity dispersions of $σ_ρ$, $σ_φ$, $σ_{z}$ = $63(11)$, $48(8)$, $19(3)$ km s$^{-1}$. We measure a mean asymmetric drift with amplitude $38(11)$ km s$^{-1}$, consistent with expectation for MSPs, given their velocity dispersions and ages. The MSP velocity distribution is consistent with binary evolution models that predict very few MSPs with velocities $>300$ km s$^{-1}$ and a mild anticorrelation of transverse velocity with orbital period.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
An insight into chromatic behaviour of jitter in pulsars and its modelling: A case study of PSR J0437$-$4715
Authors:
A. D. Kulkarni,
R. M. Shannon,
D. J. Reardon,
M. T. Miles,
M. Bailes,
M. Shamohammadi
Abstract:
Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of…
▽ More
Pulse-to-pulse profile shape variations introduce correlations in pulsar times of arrival (TOAs) across radio frequency measured at the same observational epoch. This leads to a broadband noise in excess of radiometer noise, which is termed pulse jitter noise. The presence of jitter noise limits the achievable timing precision and decreases the sensitivity of pulsar-timing data sets to signals of interest such as nanohertz-frequency gravitational waves. Current white noise models used in pulsar timing analyses attempt to account for this, assuming complete correlation of uncertainties through the arrival times collected in a unique observation and no frequency dependence of jitter (which corresponds to a rank-one covariance matrix). However, previous studies show that the brightest millisecond pulsar at decimetre wavelengths, PSR J0437$-$4715, shows decorrelation and frequency dependence of jitter noise. Here we present a detailed study of the decorrelation of jitter noise in PSR J0437$-$4715 and implement a new technique to model it. We show that the rate of decorrelation due to jitter can be expressed as a power-law in frequency. We analyse the covariance matrix associated with the jitter noise process and find that a higher-rank-approximation is essential to account for the decorrelation and to account for frequency dependence of jitter noise. We show that the use of this novel method significantly improves the estimation of other chromatic noise parameters such as dispersion measure variations. However, we find no significant improvement in errors and estimation of other timing model parameters suggesting that current methods are not biased for other parameters, for this pulsar due to this misspecification. We show that pulse energy variations show a similar decorrelation to the jitter noise, indicating a common origin for both observables.
△ Less
Submitted 8 January, 2024; v1 submitted 7 January, 2024;
originally announced January 2024.
-
Flux density monitoring of 89 millisecond pulsars with MeerKAT
Authors:
P. Gitika,
M. Bailes,
R. M. Shannon,
D. J. Reardon,
A. D. Cameron,
M. Shamohammadi,
M. T. Miles,
C. M. L. Flynn,
A. Corongiu,
M. Kramer
Abstract:
We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation i…
▽ More
We present a flux density study of 89 millisecond pulsars (MSPs) regularly monitored as part of the MeerKAT Pulsar Timing Array (MPTA) using the L-Band receiver with an approximately two week cadence between 2019-2022. For each pulsar, we have determined the mean flux densities at each epoch in eight $\sim$97 MHz sub-bands ranging from 944 to 1625 MHz. From these we have derived their modulation indices, their average and peak-to-median flux densities in each sub-band, as well as their mean spectral indices across the entire frequency range. We find that the vast majority of the MSPs have spectra that are well described by a simple power law, with a mean spectral index of -1.86(6). Using the temporal variation of the flux densities we measured the structure functions and determined the refractive scintillation timescale for seven. The structure functions provide strong evidence that the intrinsic radio luminosities of MSPs are stable. As a population, the average modulation index at 20 cm wavelengths peaks near unity at dispersion measures (DMs) of $\sim$20 pc cm$^{-3}$ and by a DM of 100 pc cm$^{-3}$ are closer to 0.2, due to refractive scintillation. We find that timing arrays can improve their observing efficiency by reacting to scintillation maxima, and that 20 cm FRB surveys should prioritise highly scintillating mid-latitude regions of the Galactic sky where they will find $\sim$30% more events and bursts at greater distances.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
The Parkes Pulsar Timing Array Third Data Release
Authors:
Andrew Zic,
Daniel J. Reardon,
Agastya Kapur,
George Hobbs,
Rami Mandow,
Małgorzata Curyło,
Ryan M. Shannon,
Jacob Askew,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew Cameron,
Zu-Cheng Chen,
Shi Dai,
Valentina Di Marco,
Yi Feng,
Matthew Kerr,
Atharva Kulkarni,
Marcus E. Lower,
Rui Luo,
Richard N. Manchester,
Matthew T. Miles,
Rowina S. Nathan,
Stefan Osłowski,
Axl F. Rogers,
Christopher J. Russell
, et al. (9 additional authors not shown)
Abstract:
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily ob…
▽ More
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release.
△ Less
Submitted 17 October, 2023; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The MeerKAT Pulsar Timing Array: First Data Release
Authors:
Matthew T. Miles,
Ryan M. Shannon,
Matthew Bailes,
Daniel J. Reardon,
Michael J. Keith,
Andrew D. Cameron,
Aditya Parthasarathy,
Mohsen Shamohammadi,
Renee Spiewak,
Willem van Straten,
Sarah Buchner,
Fernando Camilo,
Marisa Geyer,
Aris Karastergiou,
Michael Kramer,
Maciej Serylak,
Gilles Theureau,
Vivek Venkatraman Krishnan
Abstract:
We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsa…
▽ More
We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope, and operates with a typical observing cadence of two weeks using the L-band receiver that records data from 856-1712 MHz. We provide a comprehensive description of the observing system, software, and pipelines used and developed for the MeerTime project. The data products made available as part of this data release are from the 78 pulsars that had at least $30$ observations between the start of the MeerTime programme in February 2019 and October 2021. These include both sub-banded and band-averaged arrival times, as well as the initial timing ephemerides, noise models, and the frequency-dependent standard templates (portraits) used to derive pulse arrival times. After accounting for detected noise processes in the data, the frequency-averaged residuals of $67$ of the pulsars achieved a root-mean-square residual precision of $< 1 μ\rm{s}$. We also present a novel recovery of the clock correction waveform solely from pulsar timing residuals, and an exploration into preliminary findings of interest to the international pulsar timing community. The arrival times, standards and full Stokes parameter calibrated pulsar timing archives are publicly available.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Searches for Shapiro delay in seven binary pulsars using the MeerKAT telescope
Authors:
Mohsen Shamohammadi,
Matthew Bailes,
Paulo C. C. Freire,
Aditya Parthasarathy,
Daniel J. Reardon,
Ryan M. Shannon,
Vivek Venkatraman Krishnan,
Miquel C. i. Bernadich,
Andrew D. Cameron,
David J. Champion,
Alessandro Corongiu,
Christopher Flynn,
Marisa Geyer,
Michael Kramer,
Matthew T. Miles,
Andrea Possenti,
Renee Spiewak
Abstract:
Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope th…
▽ More
Precision timing of millisecond pulsars in binary systems enables observers to detect the relativistic Shapiro delay induced by space time curvature. When favourably aligned, this enables constraints to be placed on the component masses and system orientation. Here we present the results of timing campaigns on seven binary millisecond pulsars observed with the 64-antenna MeerKAT radio telescope that show evidence of Shapiro delay: PSRs~J0101$-$6422, J1101$-$6424, J1125$-$6014, J1514$-$4946, J1614$-$2230, J1732$-$5049, and J1909$-$3744. Evidence for Shapiro delay was found in all of the systems, and for three the orientations and data quality enabled strong constraints on their orbital inclinations and component masses. For PSRs~J1125$-$6014, J1614$-$2230 and J1909$-$3744, we determined pulsar masses to be $M_{\rm p} = 1.68\pm 0.17 \, {\rm M_{\odot}} $, $1.94\pm 0.03 \, {\rm M_{\odot}} $ and $1.45 \pm 0.03 \, {\rm M_{\odot}}$, and companion masses to be $M_{\rm c} = 0.33\pm 0.02 \, {\rm M_{\odot}} $, $0.495\pm 0.005 \, {\rm M_{\odot}} $ and $0.205 \pm 0.003 \, {\rm M_{\odot}}$, respectively. This provides the first independent confirmation of PSR~J1614$-$2230's mass, one of the highest known. The Shapiro delays measured for PSRs~J0101$-$6422, J1101$-$6424, J1514$-$4946, and J1732$-$5049 were only weak, and could not provide interesting component mass limits. Despite a large number of millisecond pulsars being routinely timed, relatively few have accurate masses via Shapiro delays. We use simulations to show that this is expected, and provide a formula for observers to assess how accurately a pulsar mass can be determined. We also discuss the observed correlation between pulsar companion masses and spin period, and the anti-correlation between recycled pulsar mass and their companion masses.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
The MeerTime Pulsar Timing Array -- A Census of Emission Properties and Timing Potential
Authors:
R. Spiewak,
M. Bailes,
M. T. Miles,
A. Parthasarathy,
D. J. Reardon,
M. Shamohammadi,
R. M. Shannon,
N. D. R. Bhat,
S. Buchner,
A. D. Cameron,
F. Camilo,
M. Geyer,
S. Johnston,
A. Karastergiou,
M. Keith,
M. Kramer,
M. Serylak,
W. van Straten,
G. Theureau,
V. Venkatraman Krishnan
Abstract:
MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing A…
▽ More
MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsars (MSPs) to high precision (< 1 $μ$s) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing Array (IPTA). In order to plan for the remainder of the programme and to use the allocated time most efficiently, we have conducted an initial census with the MeerKAT "L-band" receiver of 189 MSPs visible to MeerKAT and here present their dispersion measures, polarization profiles, polarization fractions, rotation measures, flux density measurements, spectral indices, and timing potential. As all of these observations are taken with the same instrument (which uses coherent dedispersion, interferometric polarization calibration techniques, and a uniform flux scale), they present an excellent resource for population studies. We used wideband pulse portraits as timing standards for each MSP and demonstrated that the MeerTime Pulsar Timing Array (MPTA) can already contribute significantly to the IPTA as it currently achieves better than 1 $μ$s timing accuracy on 89 MSPs (observed with fortnightly cadence). By the conclusion of the initial five-year MeerTime programme in July 2024, the MPTA will be extremely significant in global efforts to detect the gravitational wave background with a contribution to the detection statistic comparable to other long-standing timing programmes.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
The Parkes pulsar timing array second data release: Timing analysis
Authors:
D. J. Reardon,
R. M. Shannon,
A. D. Cameron,
B. Goncharov,
G. B. Hobbs,
H. Middleton,
M. Shamohammadi,
N. Thyagarajan,
M. Bailes,
N. D. R. Bhat,
S. Dai,
M. Kerr,
R. N. Manchester,
C. J. Russell,
R. Spiewak,
J. B. Wang,
X. J. Zhu
Abstract:
The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the p…
▽ More
The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part of the Parkes Pulsar Timing Array (PPTA) project over time spans of up to 24 yr. The data are from the second data release of the PPTA, which we have extended by including legacy data. We make the first detection of Shapiro delay in four Southern pulsars (PSRs J1017$-$7156, J1125$-$6014, J1545$-$4550, and J1732$-$5049), and of parallax in six pulsars. The prominent Shapiro delay of PSR J1125$-$6014 implies a neutron star mass of $M_p = 1.5 \pm 0.2 M_\odot$ (68% credibility interval). Measurements of both Shapiro delay and relativistic periastron advance in PSR J1600$-$3053 yield a large but uncertain pulsar mass of $M_p = 2.06^{+0.44}_{-0.41}$ M$_\odot$ (68% credibility interval). We measure the distance to PSR J1909$-$3744 to a precision of 10 lyr, indicating that for gravitational wave periods over a decade, the pulsar provides a coherent baseline for pulsar timing array experiments.
△ Less
Submitted 16 July, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
The Thousand-Pulsar-Array programme on MeerKAT III: Giant pulse characteristics of PSR J0540$-$6919
Authors:
Marisa Geyer,
Maciej Serylak,
Federico Abbate,
Matthew Bailes,
Sarah Buchner,
Jones Chilufya,
Simon Johnston,
Aris Karastergiou,
Robert Main,
Willem van Straten,
Mohsen Shamohammadi
Abstract:
PSR J0540$-$6919 is the second-most energetic radio pulsar known and resides in the Large Magellanic Cloud. Like the Crab pulsar it is observed to emit giant radio pulses (GPs). We used the newly-commissioned PTUSE instrument on the MeerKAT radio telescope to search for GPs across three observations. In a total integration time of 5.7 hrs we detected 865 pulses above our 7$σ$ threshold. With full…
▽ More
PSR J0540$-$6919 is the second-most energetic radio pulsar known and resides in the Large Magellanic Cloud. Like the Crab pulsar it is observed to emit giant radio pulses (GPs). We used the newly-commissioned PTUSE instrument on the MeerKAT radio telescope to search for GPs across three observations. In a total integration time of 5.7 hrs we detected 865 pulses above our 7$σ$ threshold. With full polarisation information for a subset of the data, we estimated the Faraday rotation measure, $\rm{RM}=-245.8 \pm 1.0$ rad m$^{-2}$ toward the pulsar. The brightest of these pulses is $\sim$ 60% linearly polarised but the pulse-to-pulse variability in the polarisation fraction is significant. We find that the cumulative GP flux distribution follows a power law distribution with index $-2.75 \pm 0.02$. Although the detected GPs make up only $\sim$ 10% of the mean flux, their average pulse shape is indistinguishable from the integrated pulse profile, and we postulate that there is no underlying emission. The pulses are scattered at L-band frequencies with the brightest pulse exhibiting a scattering time-scale of $τ= 0.92 \pm 0.02$ ms at 1.2 GHz. We find several of the giants display very narrow-band "flux knots" similar to those seen in many Fast Radio Bursts, which we assert cannot be due to scintillation or plasma lensing. The GP time-of-arrival distribution is found to be Poissonian on all but the shortest time-scales where we find four GPs in six rotations, which if GPs are statistically independent is expected to occur in only 1 of 7000 observations equivalent to our data.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
The MeerKAT Telescope as a Pulsar Facility: System verification and early science results from MeerTime
Authors:
M. Bailes,
A. Jameson,
F. Abbate,
E. D. Barr,
N. D. R. Bhat,
L. Bondonneau,
M. Burgay,
S. J. Buchner,
F. Camilo,
D. J. Champion,
I. Cognard,
P. B. Demorest,
P. C. C. Freire,
T. Gautam,
M. Geyer,
J. M. Griessmeier,
L. Guillemot,
H. Hu,
F. Jankowski,
S. Johnston,
A. Karastergiou,
R. Karuppusamy,
D. Kaur,
M. J. Keith,
M. Kramer
, et al. (50 additional authors not shown)
Abstract:
We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper pres…
▽ More
We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper presents results from the MeerTime Large Survey Project and commissioning tests with PTUSE. Highlights include observations of the double pulsar J0737-3039A, pulse profiles from 34 millisecond pulsars from a single 2.5h observation of the Globular cluster Terzan 5, the rotation measure of Ter5O, a 420-sigma giant pulse from the Large Magellanic Cloud pulsar PSR J0540-6919, and nulling identified in the slow pulsar PSR J0633-2015. One of the key design specifications for MeerKAT was absolute timing errors of less than 5 ns using their novel precise time system. Our timing of two bright millisecond pulsars confirm that MeerKAT delivers exceptional timing. PSR J2241-5236 exhibits a jitter limit of <4 ns per hour whilst timing of PSR J1909-3744 over almost 11 months yields an rms residual of 66 ns with only 4 min integrations. Our results confirm that the MeerKAT is an exceptional pulsar telescope. The array can be split into four separate sub-arrays to time over 1000 pulsars per day and the future deployment of S-band (1750-3500 MHz) receivers will further enhance its capabilities.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.