-
Reducing instrumental errors in Parkes Pulsar Timing Array data
Authors:
Axl F. Rogers,
Willem van Straten,
Sergei Gulyaev,
Aditya Parthasarathy,
George Hobbs,
Zu-Cheng Chen,
Yi Feng,
Boris Goncharov,
Agastya Kapur,
Xiaojin Liu,
Daniel Reardon,
Christopher J. Russell,
Andrew Zic
Abstract:
This paper demonstrates the impact of state-of-the-art instrumental calibration techniques on the precision of arrival times obtained from 9.6 years of observations of millisecond pulsars using the Murriyang 64-m CSIRO Parkes Radio Telescope. Our study focuses on 21-cm observations of 25 high-priority pulsars that are regularly observed as part of the Parkes Pulsar Timing Array (PPTA) project, inc…
▽ More
This paper demonstrates the impact of state-of-the-art instrumental calibration techniques on the precision of arrival times obtained from 9.6 years of observations of millisecond pulsars using the Murriyang 64-m CSIRO Parkes Radio Telescope. Our study focuses on 21-cm observations of 25 high-priority pulsars that are regularly observed as part of the Parkes Pulsar Timing Array (PPTA) project, including those predicted to be the most susceptible to calibration errors. We employ Measurement Equation Template Matching (METM) for instrumental calibration and Matrix Template Matching (MTM) for arrival time estimation, resulting in significantly improved timing residuals with up to a sixfold reduction in white noise compared to arrival times estimated using Scalar Template Matching and conventional calibration based on the Ideal Feed Assumption. The median relative reduction in white noise is 33 percent, and the maximum absolute reduction is 4.5 microseconds. For PSR J0437-4715, METM and MTM reduce the best-fit power-law amplitude (2.7 sigma) and spectral index (1.7 sigma) of the red noise in the arrival time residuals, which can can be tentatively interpreted as mitigation of 1/f noise due to otherwise unmodeled steps in polarimetric response. These findings demonstrate the potential to directly enhance the sensitivity of pulsar timing array experiments through more accurate methods of instrumental calibration and arrival time estimation.
△ Less
Submitted 29 July, 2024;
originally announced July 2024.
-
Comparing recent PTA results on the nanohertz stochastic gravitational wave background
Authors:
The International Pulsar Timing Array Collaboration,
G. Agazie,
J. Antoniadis,
A. Anumarlapudi,
A. M. Archibald,
P. Arumugam,
S. Arumugam,
Z. Arzoumanian,
J. Askew,
S. Babak,
M. Bagchi,
M. Bailes,
A. -S. Bak Nielsen,
P. T. Baker,
C. G. Bassa,
A. Bathula,
B. Bécsy,
A. Berthereau,
N. D. R. Bhat,
L. Blecha,
M. Bonetti,
E. Bortolas,
A. Brazier,
P. R. Brook,
M. Burgay
, et al. (220 additional authors not shown)
Abstract:
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA…
▽ More
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
The Parkes Pulsar Timing Array Third Data Release
Authors:
Andrew Zic,
Daniel J. Reardon,
Agastya Kapur,
George Hobbs,
Rami Mandow,
Małgorzata Curyło,
Ryan M. Shannon,
Jacob Askew,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew Cameron,
Zu-Cheng Chen,
Shi Dai,
Valentina Di Marco,
Yi Feng,
Matthew Kerr,
Atharva Kulkarni,
Marcus E. Lower,
Rui Luo,
Richard N. Manchester,
Matthew T. Miles,
Rowina S. Nathan,
Stefan Osłowski,
Axl F. Rogers,
Christopher J. Russell
, et al. (9 additional authors not shown)
Abstract:
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily ob…
▽ More
We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes "Murriyang" radio telescope. The data span is up to 18 years with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim 3$ years of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux-density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations, and compare this data release with our previous release.
△ Less
Submitted 17 October, 2023; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The gravitational-wave background null hypothesis: Characterizing noise in millisecond pulsar arrival times with the Parkes Pulsar Timing Array
Authors:
Daniel J. Reardon,
Andrew Zic,
Ryan M. Shannon,
Valentina Di Marco,
George B. Hobbs,
Agastya Kapur,
Marcus E. Lower,
Rami Mandow,
Hannah Middleton,
Matthew T. Miles,
Axl F. Rogers,
Jacob Askew,
Matthew Bailes,
N. D. Ramesh Bhat,
Andrew Cameron,
Matthew Kerr,
Atharva Kulkarni,
Richard N. Manchester,
Rowina S. Nathan,
Christopher J. Russell,
Stefan Osłowski,
Xing-Jiang Zhu
Abstract:
The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravita…
▽ More
The noise in millisecond pulsar (MSP) timing data can include contributions from observing instruments, the interstellar medium, the solar wind, solar system ephemeris errors, and the pulsars themselves. The noise environment must be accurately characterized in order to form the null hypothesis from which signal models can be compared, including the signature induced by nanohertz-frequency gravitational waves (GWs). Here we describe the noise models developed for each of the MSPs in the Parkes Pulsar Timing Array (PPTA) third data release, which have been used as the basis of a search for the isotropic stochastic GW background. We model pulsar spin noise, dispersion measure variations, scattering variations, events in the pulsar magnetospheres, solar wind variability, and instrumental effects. We also search for new timing model parameters and detected Shapiro delays in PSR~J0614$-$3329 and PSR~J1902$-$5105. The noise and timing models are validated by testing the normalized and whitened timing residuals for Gaussianity and residual correlations with time. We demonstrate that the choice of noise models significantly affects the inferred properties of a common-spectrum process. Using our detailed models, the recovered common-spectrum noise in the PPTA is consistent with a power law with a spectral index of $γ=13/3$, the value predicted for a stochastic GW background from a population of supermassive black hole binaries driven solely by GW emission.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Search for an isotropic gravitational-wave background with the Parkes Pulsar Timing Array
Authors:
Daniel J. Reardon,
Andrew Zic,
Ryan M. Shannon,
George B. Hobbs,
Matthew Bailes,
Valentina Di Marco,
Agastya Kapur,
Axl F. Rogers,
Eric Thrane,
Jacob Askew,
N. D. Ramesh Bhat,
Andrew Cameron,
Małgorzata Curyło,
William A. Coles,
Shi Dai,
Boris Goncharov,
Matthew Kerr,
Atharva Kulkarni,
Yuri Levin,
Marcus E. Lower,
Richard N. Manchester,
Rami Mandow,
Matthew T. Miles,
Rowina S. Nathan,
Stefan Osłowski
, et al. (4 additional authors not shown)
Abstract:
Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of t…
▽ More
Pulsar timing arrays aim to detect nanohertz-frequency gravitational waves (GWs). A background of GWs modulates pulsar arrival times and manifests as a stochastic process, common to all pulsars, with a signature spatial correlation. Here we describe a search for an isotropic stochastic gravitational-wave background (GWB) using observations of 30 millisecond pulsars from the third data release of the Parkes Pulsar Timing Array (PPTA), which spans 18 years. Using current Bayesian inference techniques we recover and characterize a common-spectrum noise process. Represented as a strain spectrum $h_c = A(f/1 {\rm yr}^{-1})^α$, we measure $A=3.1^{+1.3}_{-0.9} \times 10^{-15}$ and $α=-0.45 \pm 0.20$ respectively (median and 68% credible interval). For a spectral index of $α=-2/3$, corresponding to an isotropic background of GWs radiated by inspiraling supermassive black hole binaries, we recover an amplitude of $A=2.04^{+0.25}_{-0.22} \times 10^{-15}$. However, we demonstrate that the apparent signal strength is time-dependent, as the first half of our data set can be used to place an upper limit on $A$ that is in tension with the inferred common-spectrum amplitude using the complete data set. We search for spatial correlations in the observations by hierarchically analyzing individual pulsar pairs, which also allows for significance validation through randomizing pulsar positions on the sky. For a process with $α=-2/3$, we measure spatial correlations consistent with a GWB, with an estimated false-alarm probability of $p \lesssim 0.02$ (approx. $2σ$). The long timing baselines of the PPTA and the access to southern pulsars will continue to play an important role in the International Pulsar Timing Array.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
