Showing 1–36 of 36 results for author: Salter, S

Polarization based modulation of splitting ratio in femtosecond laser direct written directional couplers

Authors: Zhi-Kai Pong, Bangshan Sun, Patrick S. Salter, Martin J. Booth

Abstract: This work characterizes a phenomenon in direct laser written directional couplers where the splitting ratio for output light is dependent on the input polarization state. In general, for laser written waveguides, different coupling strengths exist for different polarization states of the input light. If the linear polarization state of the input light is not aligned with one of the symmetry axes o… ▽ More This work characterizes a phenomenon in direct laser written directional couplers where the splitting ratio for output light is dependent on the input polarization state. In general, for laser written waveguides, different coupling strengths exist for different polarization states of the input light. If the linear polarization state of the input light is not aligned with one of the symmetry axes of the system, an additional amplitude beating is imposed on the transfer of light in directional couplers of different interaction length. We present results for in-plane and out of plane directional couplers, which are supported by theoretical analysis. These new results provide insights for understanding and controlling polarization properties of directional couplers and larger photonic circuits. △ Less

Submitted 4 December, 2023; v1 submitted 20 November, 2023; originally announced November 2023.

High-precision optical fiber sensing beyond 1000°C

Authors: Mohan Wang, Patrick S. Salter, Frank P. Payne, Adrian Shipley, Igor N. Dyson, Tongyu Lui, 1tao Wang, Kaihui Zhang, Jian Zhang, Zhitai Jia, Stephen M. Morris, Martin J. Booth, Julian A. J. Fells

Abstract: Sapphire fiber can withstand around 2000°C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200°C. The repeatability above 1000°C is within {\pm}0.08%. Sapphire fiber can withstand around 2000°C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200°C. The repeatability above 1000°C is within {\pm}0.08%. △ Less

Submitted 14 August, 2023; originally announced September 2023.

Comments: 4 Pages, 5 Figures

High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers

Authors: Bangshan Sun, Simon Moser, Alexander Jesacher, Patrick S. Salter, Robert R. Thomson, Martin J. Booth

Abstract: Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the lase… ▽ More Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the laser focal shape while also achieving high scanning speed and high refractive index contrast. Here, we introduce the theory of a refractive index modification scheme that combines the advantages of both traditional non-thermal and thermal regime fabrication methods. We also propose a model of waveguide formation that was verified through a thorough study on the effects of phase aberrations on the laser focus. The presented new photonic chip fabrication scheme uses a novel focal intensity distribution, where pulse energy is relocated to the bottom of a laser focus by manipulating primary and higher order spherical aberrations. The technique can produce index modifications with high scanning speed (20 mm/s or higher), high index contrast (16 x 10-3), and high precision to fabricate with arbitrary cross-sections. This method has potential to expand the capabilities of photonic chips in applications that require small-scale, high precision, or high contrast refractive index control. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Additive GaN solid immersion lenses for enhanced photon extraction efficiency from diamond color centers

Authors: Xingrui Cheng, Nils Kolja Wessling, Saptarsi Ghosh, Andrew R. Kirkpatrick, Menno J. Kappers, Yashna N. D. Lekhai, Gavin W. Morley, Rachel A. Oliver, Jason M. Smith, Martin D. Dawson, Patrick S. Salter, Michael J. Strain

Abstract: Effective light extraction from optically active solid-state spin centres inside high-index semiconductor host crystals is an important factor in integrating these pseudo-atomic centres in wider quantum systems. Here we report increased fluorescent light collection efficiency from laser-written nitrogen vacancy centers (NV) in bulk diamond facilitated by micro-transfer printed GaN solid immersion… ▽ More Effective light extraction from optically active solid-state spin centres inside high-index semiconductor host crystals is an important factor in integrating these pseudo-atomic centres in wider quantum systems. Here we report increased fluorescent light collection efficiency from laser-written nitrogen vacancy centers (NV) in bulk diamond facilitated by micro-transfer printed GaN solid immersion lenses. Both laser-writing of NV centres and transfer printing of micro-lens structures are compatible with high spatial resolution, enabling deterministic fabrication routes towards future scalable systems development. The micro-lenses are integrated in a non-invasive manner, as they are added on top of the unstructured diamond surface and bond by Van-der-Waals forces. For emitters at 5 micrometer depth, we find approximately 2x improvement of fluorescent light collection using an air objective with a numerical aperture of NA = 0.95 in good agreement with simulations. Similarly, the solid immersion lenses strongly enhance light collection when using an objective with NA = 0.5, significantly improving the signal-to-noise ratio of the NV center emission while maintaining the NV's quantum properties after integration. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Comments: 21 pages, 13 figures

MO2: Model-Based Offline Options

Authors: Sasha Salter, Markus Wulfmeier, Dhruva Tirumala, Nicolas Heess, Martin Riedmiller, Raia Hadsell, Dushyant Rao

Abstract: The ability to discover useful behaviours from past experience and transfer them to new tasks is considered a core component of natural embodied intelligence. Inspired by neuroscience, discovering behaviours that switch at bottleneck states have been long sought after for inducing plans of minimum description length across tasks. Prior approaches have either only supported online, on-policy, bottl… ▽ More The ability to discover useful behaviours from past experience and transfer them to new tasks is considered a core component of natural embodied intelligence. Inspired by neuroscience, discovering behaviours that switch at bottleneck states have been long sought after for inducing plans of minimum description length across tasks. Prior approaches have either only supported online, on-policy, bottleneck state discovery, limiting sample-efficiency, or discrete state-action domains, restricting applicability. To address this, we introduce Model-Based Offline Options (MO2), an offline hindsight framework supporting sample-efficient bottleneck option discovery over continuous state-action spaces. Once bottleneck options are learnt offline over source domains, they are transferred online to improve exploration and value estimation on the transfer domain. Our experiments show that on complex long-horizon continuous control tasks with sparse, delayed rewards, MO2's properties are essential and lead to performance exceeding recent option learning methods. Additional ablations further demonstrate the impact on option predictability and credit assignment. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: Accepted at 1st Conference on Lifelong Learning Agents (CoLLAs) Conference Track, 2022

Priors, Hierarchy, and Information Asymmetry for Skill Transfer in Reinforcement Learning

Authors: Sasha Salter, Kristian Hartikainen, Walter Goodwin, Ingmar Posner

Abstract: The ability to discover behaviours from past experience and transfer them to new tasks is a hallmark of intelligent agents acting sample-efficiently in the real world. Equipping embodied reinforcement learners with the same ability may be crucial for their successful deployment in robotics. While hierarchical and KL-regularized reinforcement learning individually hold promise here, arguably a hybr… ▽ More The ability to discover behaviours from past experience and transfer them to new tasks is a hallmark of intelligent agents acting sample-efficiently in the real world. Equipping embodied reinforcement learners with the same ability may be crucial for their successful deployment in robotics. While hierarchical and KL-regularized reinforcement learning individually hold promise here, arguably a hybrid approach could combine their respective benefits. Key to these fields is the use of information asymmetry across architectural modules to bias which skills are learnt. While asymmetry choice has a large influence on transferability, existing methods base their choice primarily on intuition in a domain-independent, potentially sub-optimal, manner. In this paper, we theoretically and empirically show the crucial expressivity-transferability trade-off of skills across sequential tasks, controlled by information asymmetry. Given this insight, we introduce Attentive Priors for Expressive and Transferable Skills (APES), a hierarchical KL-regularized method, heavily benefiting from both priors and hierarchy. Unlike existing approaches, APES automates the choice of asymmetry by learning it in a data-driven, domain-dependent, way based on our expressivity-transferability theorems. Experiments over complex transfer domains of varying levels of extrapolation and sparsity, such as robot block stacking, demonstrate the criticality of the correct asymmetric choice, with APES drastically outperforming previous methods. △ Less

Submitted 24 April, 2023; v1 submitted 20 January, 2022; originally announced January 2022.

Journal ref: Published at the International Conference on Learning Representations, 2023

Single-mode sapphire fiber Bragg grating

Authors: Mohan Wang, Patrick S. Salter, Frank P. Payne, Adrian Shipley, Stephen M. Morris, Martin J. Booth, Julian A. J. Fells

Abstract: We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shapi… ▽ More We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shaping with a non-immersion objective. A single-mode sapphire fiber Bragg grating is created by writing a waveguide with a Bragg grating within a 425 μm diameter sapphire optical fiber, providing significant potential for accurate remote sensing in ultra-extreme environments. △ Less

Submitted 23 December, 2021; originally announced December 2021.

Comments: Submitted to Optica 12 November 2021

On-chip beam rotators, adiabatic mode converters, and waveplates through low-loss waveguides with variable cross-sections

Authors: Bangshan Sun, Fyodor Morozko, Patrick S. Salter, Simon Moser, Zhikai Pong, Raj B. Patel, Ian A. Walmsley, Mohan Wang, Adir Hazan, Nicolas Barre, Alexander Jesacher, Julian Fells, Chao He, Aviad Katiyi, ZhenNan Tian, Alina Karabchevsky, Martin J. Booth

Abstract: Photonics integrated circuitry would benefit considerably from the ability to arbitrarily control waveguide cross-sections with high precision and low loss, in order to provide more degrees of freedom in manipulating propagating light. Here, we report a new method for femtosecond laser writing of optical-fibre-compatible glass waveguides, namely spherical phase induced multi-core waveguide (SPIM-W… ▽ More Photonics integrated circuitry would benefit considerably from the ability to arbitrarily control waveguide cross-sections with high precision and low loss, in order to provide more degrees of freedom in manipulating propagating light. Here, we report a new method for femtosecond laser writing of optical-fibre-compatible glass waveguides, namely spherical phase induced multi-core waveguide (SPIM-WG), which addresses this challenging task with three dimensional on-chip light control. Fabricating in the heating regime with high scanning speed, precise deformation of cross-sections is still achievable along the waveguide, with shapes and sizes finely controllable of high resolution in both horizontal and vertical transversal directions. We observed that these waveguides have high refractive index contrast of 0.017, low propagation loss of 0.14 dB/cm, and very low coupling loss of 0.19 dB coupled from a single mode fibre. SPIM-WG devices were easily fabricated that were able to perform on-chip beam rotation through varying angles, or manipulate polarization state of propagating light for target wavelengths. We also demonstrated SPIM-WG mode converters that provide arbitrary adiabatic mode conversion with high efficiency between symmetric and asymmetric non-uniform modes; examples include circular, elliptical modes and asymmetric modes from ppKTP (periodically-poled potassium titanyl phosphate) waveguides which are generally applied in frequency conversion and quantum light sources. Created inside optical glass, these waveguides and devices have the capability to operate across ultra-broad bands from visible to infrared wavelengths. The compatibility with optical fibre also paves the way toward packaged photonic integrated circuitry, which usually needs input and output fibre connections. △ Less

Submitted 14 July, 2022; v1 submitted 5 December, 2021; originally announced December 2021.

Comments: Published in Nature: Light Science & Applications

Journal ref: Light: Science & Applications (2022) 11:214

Navigating the Mise-en-Page: Interpretive Machine Learning Approaches to the Visual Layouts of Multi-Ethnic Periodicals

Authors: Benjamin Charles Germain Lee, Joshua Ortiz Baco, Sarah H. Salter, Jim Casey

Abstract: This paper presents a computational method of analysis that draws from machine learning, library science, and literary studies to map the visual layouts of multi-ethnic newspapers from the late 19th and early 20th century United States. This work departs from prior approaches to newspapers that focus on individual pieces of textual and visual content. Our method combines Chronicling America's MARC… ▽ More This paper presents a computational method of analysis that draws from machine learning, library science, and literary studies to map the visual layouts of multi-ethnic newspapers from the late 19th and early 20th century United States. This work departs from prior approaches to newspapers that focus on individual pieces of textual and visual content. Our method combines Chronicling America's MARC data and the Newspaper Navigator machine learning dataset to identify the visual patterns of newspaper page layouts. By analyzing high-dimensional visual similarity, we aim to better understand how editors spoke and protested through the layout of their papers. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: 13 pages, 4 figures

Revealing complex optical phenomena through vectorial metrics

Authors: Chao He, Jintao Chang, Patrick S. Salter, Yuanxing Shen, Ben Dai, Pengcheng Li, Yihan Jin, Samlan Chandran Thodika, Mengmeng Li, Aziz Tariq, Jingyu Wang, Jacopo Antonello, Yang Dong, Ji Qi, Jianyu Lin, Honghui He, Daniel S. Elson, Min Zhang, Hui Ma, Martin J. Booth

Abstract: Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide ea… ▽ More Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide easily-interpretable information about the object's internal structure. Certain simpler vectorial metrics are derived from subsets of the MM elements. These metrics permit extraction of signatures that provide direct indicators of hidden optical properties of complex systems, while featuring an intriguing asymmetry about what information can or cannot be inferred via these metrics. We harness such characteristics to reveal the spin-Hall effect of light, infer microscopic structure within laser-written photonic waveguides, and conduct rapid pathological diagnosis through analysis of healthy and cancerous tissue. This provides new insight for the broader usage of such asymmetric inferred vectorial information. △ Less

Submitted 21 July, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Microscopic processes during ultra-fast laser generation of Frenkel defects in diamond

Authors: Benjamin Griffiths, Andrew Kirkpatrick, Shannon S. Nicley, Rajesh L. Patel, Joanna M. Zajac, Gavin W. Morley, Martin J. Booth, Patrick S. Salter, Jason M. Smith

Abstract: Engineering single atomic defects into wide bandgap materials has become an attractive field in recent years due to emerging applications such as solid-state quantum bits and sensors. The simplest atomic-scale defect is the lattice vacancy which is often a constituent part of more complex defects such as the nitrogen-vacancy (NV) centre in diamond, therefore an understanding of the formation mecha… ▽ More Engineering single atomic defects into wide bandgap materials has become an attractive field in recent years due to emerging applications such as solid-state quantum bits and sensors. The simplest atomic-scale defect is the lattice vacancy which is often a constituent part of more complex defects such as the nitrogen-vacancy (NV) centre in diamond, therefore an understanding of the formation mechanisms and precision engineering of vacancies is desirable. We present a theoretical and experimental study into the ultra-fast laser generation of vacancy-interstitial pairs (Frenkel defects) in diamond. The process is described by a set of coupled rate equations of the pulsed laser interaction with the material and of the non-equilibrium dynamics of charge carriers during and in the wake of the pulse. We find that a model for Frenkel defect generation via the recombination of a bound biexciton as the electron plasma cools provides good agreement with experimental data, reproducing an effective non-linearity of $\sim$ 40 for Frenkel defect generation with respect to laser pulse energy. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 17 pages, 11 figures

Attention-Privileged Reinforcement Learning

Authors: Sasha Salter, Dushyant Rao, Markus Wulfmeier, Raia Hadsell, Ingmar Posner

Abstract: Image-based Reinforcement Learning is known to suffer from poor sample efficiency and generalisation to unseen visuals such as distractors (task-independent aspects of the observation space). Visual domain randomisation encourages transfer by training over visual factors of variation that may be encountered in the target domain. This increases learning complexity, can negatively impact learning ra… ▽ More Image-based Reinforcement Learning is known to suffer from poor sample efficiency and generalisation to unseen visuals such as distractors (task-independent aspects of the observation space). Visual domain randomisation encourages transfer by training over visual factors of variation that may be encountered in the target domain. This increases learning complexity, can negatively impact learning rate and performance, and requires knowledge of potential variations during deployment. In this paper, we introduce Attention-Privileged Reinforcement Learning (APRiL) which uses a self-supervised attention mechanism to significantly alleviate these drawbacks: by focusing on task-relevant aspects of the observations, attention provides robustness to distractors as well as significantly increased learning efficiency. APRiL trains two attention-augmented actor-critic agents: one purely based on image observations, available across training and transfer domains; and one with access to privileged information (such as environment states) available only during training. Experience is shared between both agents and their attention mechanisms are aligned. The image-based policy can then be deployed without access to privileged information. We experimentally demonstrate accelerated and more robust learning on a diverse set of domains, leading to improved final performance for environments both within and outside the training distribution. △ Less

Submitted 11 January, 2021; v1 submitted 19 November, 2019; originally announced November 2019.

Comments: Published at Conference on Robot Learning (CoRL) 2020

Imagine That! Leveraging Emergent Affordances for 3D Tool Synthesis

Authors: Yizhe Wu, Sudhanshu Kasewa, Oliver Groth, Sasha Salter, Li Sun, Oiwi Parker Jones, Ingmar Posner

Abstract: In this paper we explore the richness of information captured by the latent space of a vision-based generative model. The model combines unsupervised generative learning with a task-based performance predictor to learn and to exploit task-relevant object affordances given visual observations from a reaching task, involving a scenario and a stick-like tool. While the learned embedding of the genera… ▽ More In this paper we explore the richness of information captured by the latent space of a vision-based generative model. The model combines unsupervised generative learning with a task-based performance predictor to learn and to exploit task-relevant object affordances given visual observations from a reaching task, involving a scenario and a stick-like tool. While the learned embedding of the generative model captures factors of variation in 3D tool geometry (e.g. length, width, and shape), the performance predictor identifies sub-manifolds of the embedding that correlate with task success. Within a variety of scenarios, we demonstrate that traversing the latent space via backpropagation from the performance predictor allows us to imagine tools appropriate for the task at hand. Our results indicate that affordances-like the utility for reaching-are encoded along smooth trajectories in latent space. Accessing these emergent affordances by considering only high-level performance criteria (such as task success) enables an agent to manipulate tool geometries in a targeted and deliberate way. △ Less

Submitted 7 October, 2020; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: 12 pages, 6 figures

ACM Class: I.2.10; I.2.6

Laser writing of scalable single colour centre in silicon carbide

Authors: Yu-Chen Chen, Patrick S. Salter, Matthias Niethammer, Matthias Widmann, Florian Kaiser, Roland Nagy, Naoya Morioka, Charles Babin, J ürgen Erlekampf, Patrick Berwian, Martin Booth, J örg Wrachtrup

Abstract: Single photon emitters in silicon carbide (SiC) are attracting attention as quantum photonic systems. However, to achieve scalable devices it is essential to generate single photon emitters at desired locations on demand. Here we report the controlled creation of single silicon vacancy ($V_{Si}$) centres in 4H-SiC using laser writing without any post-annealing process. Due to the aberration correc… ▽ More Single photon emitters in silicon carbide (SiC) are attracting attention as quantum photonic systems. However, to achieve scalable devices it is essential to generate single photon emitters at desired locations on demand. Here we report the controlled creation of single silicon vacancy ($V_{Si}$) centres in 4H-SiC using laser writing without any post-annealing process. Due to the aberration correction in the writing apparatus and the non-annealing process, we generate single $V_{Si}$ centres with yields up to 30%, located within about 80 nm of the desired position in the transverse plane. We also investigated the photophysics of the laser writing $V_{Si}$ centres and conclude that there are about 16 photons involved in the laser writing $V_{Si}$ centres process. Our results represent a powerful tool in fabrication of single $V_{Si}$ centres in SiC for quantum technologies and provide further insights into laser writing defects in dielectric materials. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Laser writing of individual atomic defects in a crystal with near-unity yield

Authors: Yu-Chen Chen, Benjamin Griffiths, Laiyi Weng, Shannon Nicley, Shazeaa N. Ishmael, Yashna Lekhai, Sam Johnson, Colin J. Stephen, Ben L. Green, Gavin W. Morley, Mark E. Newton, Martin J. Booth, Patrick S. Salter, Jason M. Smith

Abstract: Atomic defects in wide band gap materials show great promise for development of a new generation of quantum information technologies, but have been hampered by the inability to produce and engineer the defects in a controlled way. The nitrogen-vacancy (NV) color center in diamond is one of the foremost candidates, with single defects allowing optical addressing of electron spin and nuclear spin de… ▽ More Atomic defects in wide band gap materials show great promise for development of a new generation of quantum information technologies, but have been hampered by the inability to produce and engineer the defects in a controlled way. The nitrogen-vacancy (NV) color center in diamond is one of the foremost candidates, with single defects allowing optical addressing of electron spin and nuclear spin degrees of freedom with potential for applications in advanced sensing and computing. Here we demonstrate a method for the deterministic writing of individual NV centers at selected locations with high positioning accuracy using laser processing with online fluorescence feedback. This method provides a new tool for the fabrication of engineered materials and devices for quantum technologies and offers insight into the diffusion dynamics of point defects in solids. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: 16 pages, 8 figures

Journal ref: Optica 6, 662 (2019)

Three-dimensional solid-state qubit arrays with long-lived spin coherence

Authors: C. J. Stephen, B. L. Green, Y. N. D. Lekhai, L. Weng, P. Hill, S. Johnson, A. C. Frangeskou, P. L. Diggle, M. J. Strain, E. Gu, M. E. Newton, J. M. Smith, P. S. Salter, G. W. Morley

Abstract: Three-dimensional arrays of silicon transistors increase the density of bits. Solid-state qubits are much larger so could benefit even more from using the third dimension given that useful fault-tolerant quantum computing will require at least 100,000 physical qubits and perhaps one billion. Here we use laser writing to create 3D arrays of nitrogen-vacancy centre (NVC) qubits in diamond. This woul… ▽ More Three-dimensional arrays of silicon transistors increase the density of bits. Solid-state qubits are much larger so could benefit even more from using the third dimension given that useful fault-tolerant quantum computing will require at least 100,000 physical qubits and perhaps one billion. Here we use laser writing to create 3D arrays of nitrogen-vacancy centre (NVC) qubits in diamond. This would allow 5 million qubits inside a commercially available 4.5x4.5x0.5 mm diamond based on five nuclear qubits per NVC and allowing $(10 μm)^3$ per NVC to leave room for our laser-written electrical control. The spin coherence times we measure are an order of magnitude longer than previous laser-written qubits and at least as long as non-laser-written NVC. As well as NVC quantum computing, quantum communication and nanoscale sensing could benefit from the same platform. Our approach could also be extended to other qubits in diamond and silicon carbide. △ Less

Submitted 10 July, 2018; originally announced July 2018.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Applied 12, 064005 (2019)

SAFARI I: A SPHERE discovery of a super metal-rich M dwarf companion to the star HD 86006

Authors: B. M. Pantoja, J. S. Jenkins, J. H. Girard, A. Vigan, G. S. Salter, M. I. Jones

Abstract: We report the direct detection of a fully convective, early-to-mid M-dwarf companion orbiting the star HD 86006, using ESO-SPHERE during Science Verification as part of the SAFARI program. HARPS+CORALIE radial velocity measurements first indicated a possible companion. Such work highlights the synergies that are now possible between these two observing methods. We studied the companion by comparin… ▽ More We report the direct detection of a fully convective, early-to-mid M-dwarf companion orbiting the star HD 86006, using ESO-SPHERE during Science Verification as part of the SAFARI program. HARPS+CORALIE radial velocity measurements first indicated a possible companion. Such work highlights the synergies that are now possible between these two observing methods. We studied the companion by comparing our observed spectra with BT-Settl models and template spectra, measuring spectral indices to obtain a spectral type, and used a joint radial velocity and astrometric fit to simulate the companion's orbit. The companion was found to be 4.14 mag fainter than the primary in the H2 band, residing at a physical separation of $\sim$ 25 AU, with a $T_\mathrm{eff}$ and spectral type of 3321 $\pm$ 111 K and M 4.1 $\pm$ 1.1, respectively. We note that the age derived from BT-Settl models for such a star is too low by over two orders of magnitude, similar to other known field mid-M stars. We searched for the radial velocity companion to HD 90520 without any clear detection, however we reached a low contrast level of $Δ$H2 = 10.3 mag (or $1.3 * 10^{-4}$) at 0.2$''$ and 12.6 mag (or $10^{-5}$) at 0.5$''$, allowing us to rule out any low-mass companions with masses of 0.07 and 0.05 M$_{\odot}$ at these separations. This discovery provides us with the exciting opportunity to better constrain the mass-luminosity relation for low-mass stars in the super metal-rich domain, expanding our understanding of the most-common types of stars and substellar objects. △ Less

Submitted 26 June, 2018; originally announced June 2018.

Comments: Accepted for publication in MNRAS

Microscope calibration using laser written fluorescence

Authors: Alexander D. Corbett, Michael Shaw, Andrew Yacoot, Andrew Jefferson, Lothar Schermelleh, Tony Wilson, Martin Booth, Patrick S. Salter

Abstract: There is currently no widely adopted standard for the optical characterisation of fluorescence microscopes. We used laser written fluorescence to generate two- and three-dimensional patterns to deliver a quick and quantitative measure of imaging performance. We report on the use of two laser written patterns to measure the lateral resolution, illumination uniformity, lens distortion and colour pla… ▽ More There is currently no widely adopted standard for the optical characterisation of fluorescence microscopes. We used laser written fluorescence to generate two- and three-dimensional patterns to deliver a quick and quantitative measure of imaging performance. We report on the use of two laser written patterns to measure the lateral resolution, illumination uniformity, lens distortion and colour plane alignment using confocal and structured illumination fluorescence microscopes. △ Less

Submitted 14 June, 2018; originally announced June 2018.

Comments: 16 pages, 10 figures

TACO: Learning Task Decomposition via Temporal Alignment for Control

Authors: Kyriacos Shiarlis, Markus Wulfmeier, Sasha Salter, Shimon Whiteson, Ingmar Posner

Abstract: Many advanced Learning from Demonstration (LfD) methods consider the decomposition of complex, real-world tasks into simpler sub-tasks. By reusing the corresponding sub-policies within and between tasks, they provide training data for each policy from different high-level tasks and compose them to perform novel ones. Existing approaches to modular LfD focus either on learning a single high-level t… ▽ More Many advanced Learning from Demonstration (LfD) methods consider the decomposition of complex, real-world tasks into simpler sub-tasks. By reusing the corresponding sub-policies within and between tasks, they provide training data for each policy from different high-level tasks and compose them to perform novel ones. Existing approaches to modular LfD focus either on learning a single high-level task or depend on domain knowledge and temporal segmentation. In contrast, we propose a weakly supervised, domain-agnostic approach based on task sketches, which include only the sequence of sub-tasks performed in each demonstration. Our approach simultaneously aligns the sketches with the observed demonstrations and learns the required sub-policies. This improves generalisation in comparison to separate optimisation procedures. We evaluate the approach on multiple domains, including a simulated 3D robot arm control task using purely image-based observations. The results show that our approach performs commensurately with fully supervised approaches, while requiring significantly less annotation effort. △ Less

Submitted 10 August, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 12 Pages. Published at ICML 2018

High resolution structural characterisation of laser-induced defect clusters inside diamond

Authors: Patrick S. Salter, Martin J. Booth, Arnaud Courvoisier, David A. J. Moran, Donald A. MacLaren

Abstract: Laser writing with ultrashort pulses provides a potential route for the manufacture of three-dimensional wires, waveguides and defects within diamond. We present a transmission electron microscopy (TEM) study of the intrinsic structure of the laser modifications and reveal a complex distribution of defects. Electron energy loss spectroscopy (EELS) indicates that the majority of the irradiated regi… ▽ More Laser writing with ultrashort pulses provides a potential route for the manufacture of three-dimensional wires, waveguides and defects within diamond. We present a transmission electron microscopy (TEM) study of the intrinsic structure of the laser modifications and reveal a complex distribution of defects. Electron energy loss spectroscopy (EELS) indicates that the majority of the irradiated region remains as $sp^3$ bonded diamond. Electrically-conductive paths are attributed to the formation of multiple nano-scale, $sp^2$-bonded graphitic wires and a network of strain-relieving micro-cracks. △ Less

Submitted 11 August, 2017; v1 submitted 16 June, 2017; originally announced June 2017.

Femtosecond laser inscription of Bragg grating waveguides in bulk diamond

Authors: V. Bharadwaj, A. Courvoisier, T. T. Fernandez, R. Ramponi, G. Galzerano, J. Nunn, M. J. Booth, R. Osellame, S. M. Eaton, P. S. Salter

Abstract: Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating.… ▽ More Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating. This fabrication technology opens the way towards advanced 3D photonic networks in diamond for a range of applications. △ Less

Submitted 1 September, 2017; v1 submitted 29 May, 2017; originally announced May 2017.

Comments: 4 Pages, 5 figures

MSC Class: 00A79; 81Q37; 78A60 ACM Class: J.2

Four-dimensional light shaping: manipulating ultrafast spatio-temporal foci in space and time

Authors: Bangshan Sun, Patrick S. Salter, Clemens Roider, Alexander Jesacher, Johannes Strauss, Johannes Heberle, Michael Schmidt, Martin J. Booth

Abstract: Spectral dispersion of ultrashort pulses allows simultaneous focusing of light in both space and time creating so-called spatio-temporal foci. Such space-time coupling may be combined with existing holographic techniques to give a further dimension of control when generating focal light fields. It is shown that a phase-only hologram placed in the pupil plane of an objective and illuminated by a sp… ▽ More Spectral dispersion of ultrashort pulses allows simultaneous focusing of light in both space and time creating so-called spatio-temporal foci. Such space-time coupling may be combined with existing holographic techniques to give a further dimension of control when generating focal light fields. It is shown that a phase-only hologram placed in the pupil plane of an objective and illuminated by a spatially chirped ultrashort pulse can be used to generate three dimensional arrays of spatio-temporally focused spots. Exploiting the pulse front tilt generated at focus when applying simultaneous spatial and temporal focusing (SSTF), it is possible to overlap neighbouring foci in time to create a smooth intensity distribution. The resulting light field displays a high level of axial confinement, with experimental demonstrations given through two-photon microscopy and non-linear laser fabrication of glass. △ Less

Submitted 15 May, 2017; originally announced May 2017.

Laser writing of coherent colour centres in diamond

Authors: Yu-Chen Chen, Patrick S. Salter, Sebastian Knauer, Laiyi Weng, Angelo C. Frangeskou, Colin J. Stephen, Philip R. Dolan, Sam Johnson, Ben L. Green, Gavin W. Morley, Mark E. Newton, John G. Rarity, Martin J. Booth, Jason M. Smith

Abstract: Optically active point defects in crystals have gained widespread attention as photonic systems that can find use in quantum information technologies. However challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single nitrogen-vacancy (NV) centres in diamond using laser writing. The use… ▽ More Optically active point defects in crystals have gained widespread attention as photonic systems that can find use in quantum information technologies. However challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single nitrogen-vacancy (NV) centres in diamond using laser writing. The use of aberration correction in the writing optics allows precise positioning of vacancies within the diamond crystal, and subsequent annealing produces single NV centres with up to 45% success probability, within about 200 nm of the desired position. Selected NV centres fabricated by this method display stable, coherent optical transitions at cryogenic temperatures, a pre-requisite for the creation of distributed quantum networks of solid-state qubits. The results illustrate the potential of laser writing as a new tool for defect engineering in quantum technologies. △ Less

Submitted 16 June, 2016; originally announced June 2016.

Comments: 21 pages including Supplementary information

Journal ref: Nature Photonics 11, 77 (2017)

Inscription of 3D waveguides in diamond using an ultrafast laser

Authors: Arnaud Courvoisier, Martin J. Booth, Patrick S. Salter

Abstract: Three dimensional waveguides within the bulk of diamond are manufactured using ultrafast laser fabrication. High intensities within the focal volume of the laser cause breakdown of the diamond into a graphitic phase leading to a stress induced refractive index change in neighboring regions. Type II waveguiding is thus enabled between two adjacent graphitic tracks, but supporting just a single pola… ▽ More Three dimensional waveguides within the bulk of diamond are manufactured using ultrafast laser fabrication. High intensities within the focal volume of the laser cause breakdown of the diamond into a graphitic phase leading to a stress induced refractive index change in neighboring regions. Type II waveguiding is thus enabled between two adjacent graphitic tracks, but supporting just a single polarization state. We show that adaptive aberration correction during the laser processing allows the controlled fabrication of more complex structures beneath the surface of the diamond which can be used for 3D waveguide splitters and Type III waveguides which support both polarizations. △ Less

Submitted 28 July, 2016; v1 submitted 1 June, 2016; originally announced June 2016.

Journal ref: Appl. Phys. Lett. 109, 031109 (2016)

The Pan-Pacific Planet Search III: Five companions orbiting giant stars

Authors: R. A. Wittenmyer, R. P. Butler, L. Wang, C. Bergmann, G. S. Salter, C. G. Tinney, John Asher Johnson

Abstract: We report a new giant planet orbiting the K giant HD 155233, as well as four stellar-mass companions from the Pan-Pacific Planet Search, a southern hemisphere radial velocity survey for planets orbiting nearby giants and subgiants. We also present updated velocities and a refined orbit for HD 47205b (7 CMa b), the first planet discovered by this survey. HD 155233b has a period of 885$\pm$63 days,… ▽ More We report a new giant planet orbiting the K giant HD 155233, as well as four stellar-mass companions from the Pan-Pacific Planet Search, a southern hemisphere radial velocity survey for planets orbiting nearby giants and subgiants. We also present updated velocities and a refined orbit for HD 47205b (7 CMa b), the first planet discovered by this survey. HD 155233b has a period of 885$\pm$63 days, eccentricity e=0.03$\pm$0.20, and m sin i=2.0$\pm$0.5 M_jup. The stellar-mass companions range in m sin i from 0.066 M_sun to 0.33 M_sun. Whilst HD 104358B falls slightly below the traditional 0.08 M_sun hydrogen-burning mass limit, and is hence a brown dwarf candidate, we estimate only a 50% a priori probability of a truly substellar mass. △ Less

Submitted 14 October, 2015; originally announced October 2015.

Comments: Accepted for publication in MNRAS

Development of integrated mode reformatting components for diffraction-limited spectroscopy

Authors: D. G. MacLachlan, R. J. Harris, D. Choudhury, R. D. Simmonds, P. S. Salter, M. J. Booth, J. R. Allington-Smith, R. R. Thomson

Abstract: We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope point-spread-function to a spectrograph operating at the diffraction limit, thus enabling compact, high-resolution spectrographs that are free of modal-noise. We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope point-spread-function to a spectrograph operating at the diffraction limit, thus enabling compact, high-resolution spectrographs that are free of modal-noise. △ Less

Submitted 7 October, 2015; originally announced October 2015.

GJ 832c: A super-earth in the habitable zone

Authors: R. A. Wittenmyer, Mikko Tuomi, R. P. Butler, H. R. A. Jones, Guillem Anglada-Escude, Jonathan Horner, C. G. Tinney, J. P. Marshall, B. D. Carter, J. Bailey, G. S. Salter, S. J. O'Toole, D. Wright, J. D. Crane, S. A. Schectman, P. Arriagada, I. Thompson, D. Minniti, J. S. Jenkins, M. Diaz

Abstract: We report the detection of GJ 832c, a super-Earth orbiting near the inner edge of the habitable zone of GJ 832, an M dwarf previously known to host a Jupiter analog in a nearly-circular 9.4-year orbit. The combination of precise radial-velocity measurements from three telescopes reveals the presence of a planet with a period of 35.68+/-0.03 days and minimum mass (m sin i) of 5.4+/-1.0 Earth masses… ▽ More We report the detection of GJ 832c, a super-Earth orbiting near the inner edge of the habitable zone of GJ 832, an M dwarf previously known to host a Jupiter analog in a nearly-circular 9.4-year orbit. The combination of precise radial-velocity measurements from three telescopes reveals the presence of a planet with a period of 35.68+/-0.03 days and minimum mass (m sin i) of 5.4+/-1.0 Earth masses. GJ 832c moves on a low-eccentricity orbit (e=0.18+/-0.13) towards the inner edge of the habitable zone. However, given the large mass of the planet, it seems likely that it would possess a massive atmosphere, which may well render the planet inhospitable. Indeed, it is perhaps more likely that GJ 832c is a "super-Venus," featuring significant greenhouse forcing. With an outer giant planet and an interior, potentially rocky planet, the GJ 832 planetary system can be thought of as a miniature version of our own Solar system. △ Less

Submitted 21 June, 2014; originally announced June 2014.

Comments: Accepted for publication in ApJ

Strain-optic active control for quantum integrated photonics

Authors: Peter C. Humphreys, Benjamin J. Metcalf, Justin B. Spring, Merritt Moore, Patrick S. Salter, Martin J. Booth, W. Steven Kolthammer, Ian A. Walmsley

Abstract: We present a practical method for active phase control on a photonic chip that has immediate applications in quantum photonics. Our approach uses strain-optic modification of the refractive index of individual waveguides, effected by a millimeter-scale mechanical actuator. The resulting phase change of propagating optical fields is rapid and polarization-dependent, enabling quantum applications th… ▽ More We present a practical method for active phase control on a photonic chip that has immediate applications in quantum photonics. Our approach uses strain-optic modification of the refractive index of individual waveguides, effected by a millimeter-scale mechanical actuator. The resulting phase change of propagating optical fields is rapid and polarization-dependent, enabling quantum applications that require active control and polarization encoding. We demonstrate strain-optic control of non-classical states of light in silica, showing the generation of 2-photon polarisation N00N states by manipulating Hong-Ou-Mandel interference. We also demonstrate switching times of a few microseconds, which are sufficient for silica-based feed-forward control of photonic quantum states. △ Less

Submitted 21 November, 2014; v1 submitted 12 May, 2014; originally announced May 2014.

Comments: 7 pages, 5 figures. Updated to be consistent with published version

Journal ref: Optics Express, Vol. 22, Issue 18, pp. 21719-21726 (2014)

The Anglo-Australian Planet Search. XXIII. Two New Jupiter Analogs

Authors: Robert A. Wittenmyer, Jonathan Horner, C. G. Tinney, R. P. Butler, H. R. A. Jones, Mikko Tuomi, G. S. Salter, B. D. Carter, F. Elliott Koch, S. J. O'Toole, J. Bailey, D. Wright

Abstract: We report the discovery of two long-period giant planets from the Anglo-Australian Planet Search. HD 154857c is in a multiple-planet system, while HD 114613b appears to be solitary. HD 114613b has an orbital period P=10.5 years, and a minimum mass m sin i of 0.48 Jupiter masses; HD 154857c has P=9.5 years and m sin i=2.6 Jupiter masses. These new data confirm the planetary nature of the previously… ▽ More We report the discovery of two long-period giant planets from the Anglo-Australian Planet Search. HD 154857c is in a multiple-planet system, while HD 114613b appears to be solitary. HD 114613b has an orbital period P=10.5 years, and a minimum mass m sin i of 0.48 Jupiter masses; HD 154857c has P=9.5 years and m sin i=2.6 Jupiter masses. These new data confirm the planetary nature of the previously unconstrained long-period object in the HD 154857 system. We have performed detailed dynamical stability simulations which show that the HD 154857 two-planet system is stable on timescales of at least 100 million years. These results highlight the continued importance of "legacy" surveys with long observational baselines; these ongoing campaigns are critical for determining the population of Jupiter analogs, and hence of those planetary systems with architectures most like our own Solar system. △ Less

Submitted 21 January, 2014; originally announced January 2014.

Comments: Accepted for publication in ApJ

A Detailed Analysis of the HD 73526 2:1 Resonant Planetary System

Authors: Robert A. Wittenmyer, Xianyu Tan, Man Hoi Lee, Jonathan Horner, C. G. Tinney, R. P. Butler, G. S. Salter, B. D. Carter, H. R. A. Jones, S. J. O'Toole, J. Bailey, D. Wright, J. D. Crane, S. A. Schectman, P. Arriagada, I. Thompson, D. Minniti, M. Diaz

Abstract: We present six years of new radial-velocity data from the Anglo-Australian and Magellan Telescopes on the HD 73526 2:1 resonant planetary system. We investigate both Keplerian and dynamical (interacting) fits to these data, yielding four possible configurations for the system. The new data now show that both resonance angles are librating, with amplitudes of 40 degrees and 60 degrees, respectively… ▽ More We present six years of new radial-velocity data from the Anglo-Australian and Magellan Telescopes on the HD 73526 2:1 resonant planetary system. We investigate both Keplerian and dynamical (interacting) fits to these data, yielding four possible configurations for the system. The new data now show that both resonance angles are librating, with amplitudes of 40 degrees and 60 degrees, respectively. We then perform long-term dynamical stability tests to differentiate these solutions, which only differ significantly in the masses of the planets. We show that while there is no clearly preferred system inclination, the dynamical fit with i=90 degrees provides the best combination of goodness-of-fit and long-term dynamical stability. △ Less

Submitted 26 November, 2013; originally announced November 2013.

Comments: Accepted for publication in ApJ

Fast and Slow Rotators in the Densest Environments: a SWIFT IFS study of the Coma Cluster

Authors: R. C. W. Houghton, Roger L. Davies, F. D'Eugenio, N. Scott, N. Thatte, F. Clarke, M. Tecza, G. S. Salter, L. M. R. Fogarty, T. Goodsall

Abstract: We present integral-field spectroscopy of 27 galaxies in the Coma cluster observed with the Oxford SWIFT spectrograph, exploring the kinematic morphology-density relationship in a cluster environment richer and denser than any in the ATLAS3D survey. Our new data enables comparison of the kinematic morphology relation in three very different clusters (Virgo, Coma and Abell 1689) as well as to the f… ▽ More We present integral-field spectroscopy of 27 galaxies in the Coma cluster observed with the Oxford SWIFT spectrograph, exploring the kinematic morphology-density relationship in a cluster environment richer and denser than any in the ATLAS3D survey. Our new data enables comparison of the kinematic morphology relation in three very different clusters (Virgo, Coma and Abell 1689) as well as to the field/group environment. The Coma sample was selected to match the parent luminosity and ellipticity distributions of the early-type population within a radius 15' (0.43 Mpc) of the cluster centre, and is limited to r' = 16 mag (equivalent to M_K = -21.5 mag), sampling one third of that population. From analysis of the lambda-ellipticity diagram, we find 15+-6% of early-type galaxies are slow rotators; this is identical to the fraction found in the field and the average fraction in the Virgo cluster, based on the ATLAS3D data. It is also identical to the average fraction found recently in Abell 1689 by D'Eugenio et al.. Thus it appears that the average slow rotator fraction of early type galaxies remains remarkably constant across many different environments, spanning five orders of magnitude in galaxy number density. However, within each cluster the slow rotators are generally found in regions of higher projected density, possibly as a result of mass segregation by dynamical friction. These results provide firm constraints on the mechanisms that produce early-type galaxies: they must maintain a fixed ratio between the number of fast rotators and slow rotators while also allowing the total early-type fraction to increase in clusters relative to the field. A complete survey of Coma, sampling hundreds rather than tens of galaxies, could probe a more representative volume of Coma and provide significantly stronger constraints, particularly on how the slow rotator fraction varies at larger radii. △ Less

Submitted 29 August, 2013; originally announced August 2013.

Comments: Accepted for publication in MNRAS

Forever alone? Testing single eccentric planetary systems for multiple companions

Authors: Robert A. Wittenmyer, Songhu Wang, Jonathan Horner, C. G. Tinney, R. P. Butler, H. R. A. Jones, S. J. O'Toole, J. Bailey, B. D. Carter, G. S. Salter, D. Wright, Ji-Lin Zhou

Abstract: Determining the orbital eccentricity of an extrasolar planet is critically important for understanding the system's dynamical environment and history. However, eccentricity is often poorly determined or entirely mischaracterized due to poor observational sampling, low signal-to-noise, and/or degeneracies with other planetary signals. Some systems previously thought to contain a single, moderate-ec… ▽ More Determining the orbital eccentricity of an extrasolar planet is critically important for understanding the system's dynamical environment and history. However, eccentricity is often poorly determined or entirely mischaracterized due to poor observational sampling, low signal-to-noise, and/or degeneracies with other planetary signals. Some systems previously thought to contain a single, moderate-eccentricity planet have been shown, after further monitoring, to host two planets on nearly-circular orbits. We investigate published apparent single-planet systems to see if the available data can be better fit by two lower-eccentricity planets. We identify nine promising candidate systems and perform detailed dynamical tests to confirm the stability of the potential new multiple-planet systems. Finally, we compare the expected orbits of the single- and double-planet scenarios to better inform future observations of these interesting systems. △ Less

Submitted 4 July, 2013; v1 submitted 2 July, 2013; originally announced July 2013.

Comments: Accepted for publication in ApJS

On-chip low loss heralded source of pure single photons

Authors: Justin B. Spring, Patrick S. Salter, Benjamin J. Metcalf, Peter C. Humphreys, Merritt Moore, Nicholas Thomas-Peter, Marco Barbieri, Xian-Min Jin, Nathan K. Langford, W. Steven Kolthammer, Martin J. Booth, Ian A. Walmsley

Abstract: A key obstacle to the experimental realization of many photonic quantum-enhanced technologies is the lack of low-loss sources of single photons in pure quantum states. We demonstrate a promising solution: generation of heralded single photons in a silica photonic chip by spontaneous four-wave mixing. A heralding efficiency of 40%, corresponding to a preparation efficiency of 80% accounting for det… ▽ More A key obstacle to the experimental realization of many photonic quantum-enhanced technologies is the lack of low-loss sources of single photons in pure quantum states. We demonstrate a promising solution: generation of heralded single photons in a silica photonic chip by spontaneous four-wave mixing. A heralding efficiency of 40%, corresponding to a preparation efficiency of 80% accounting for detector performance, is achieved due to efficient coupling of the low-loss source to optical fibers. A single photon purity of 0.86 is measured from the source number statistics without filtering, and confirmed by direct measurement of the joint spectral intensity. We calculate that similar high-heralded-purity output can be obtained from visible to telecom spectral regions using this approach. On-chip silica sources can have immediate application in a wide range of single-photon quantum optics applications which employ silica photonics. △ Less

Submitted 29 April, 2013; originally announced April 2013.

Comments: 11 pages, 5 figures

Journal ref: Optics Express, Vol. 21, Issue 11, pp. 13522-13532 (2013)

Observing Strategies for the Detection of Jupiter Analogs

Authors: Robert A. Wittenmyer, J. Horner, R. P. Butler, H. R. A. Jones, S. J. O'Toole, J. Bailey, B. D. Carter, G. S. Salter, D. Wright

Abstract: To understand the frequency, and thus the formation and evolution, of planetary systems like our own solar system, it is critical to detect Jupiter-like planets in Jupiter-like orbits. For long-term radial-velocity monitoring, it is useful to estimate the observational effort required to reliably detect such objects, particularly in light of severe competition for limited telescope time. We perfor… ▽ More To understand the frequency, and thus the formation and evolution, of planetary systems like our own solar system, it is critical to detect Jupiter-like planets in Jupiter-like orbits. For long-term radial-velocity monitoring, it is useful to estimate the observational effort required to reliably detect such objects, particularly in light of severe competition for limited telescope time. We perform detailed simulations of observational campaigns, maximizing the realism of the sampling of a set of simulated observations. We then compute the detection limits for each campaign to quantify the effect of increasing the number of observational epochs and varying their time coverage. We show that once there is sufficient time baseline to detect a given orbital period, it becomes less effective to add further time coverage -- rather, the detectability of a planet scales roughly as the square root of the number of observations, independently of the number of orbital cycles included in the data string. We also show that no noise floor is reached, with a continuing improvement in detectability at the maximum number of observations N=500 tested here. △ Less

Submitted 13 March, 2013; originally announced March 2013.

Comments: Accepted for publication in PASP

Signals embedded in the radial velocity noise. Periodic variations in the tau Ceti velocities

Authors: Mikko Tuomi, Hugh R. A. Jones, James S. Jenkins, Chris G. Tinney, R. Paul Butler, Steve S. Vogt, John R. Barnes, Robert A. Wittenmyer, Simon O'Toole, Jonathan Horner, Jeremy Bailey, Brad D. Carter, Duncan J. Wright, Graeme S. Salter, David Pinfield

Abstract: The abilities of radial velocity exoplanet surveys to detect the lowest-mass extra-solar planets are currently limited by a combination of instrument precision, lack of data, and "jitter". Jitter is a general term for any unknown features in the noise, and reflects a lack of detailed knowledge of stellar physics (asteroseismology, starspots, magnetic cycles, granulation, and other stellar surface… ▽ More The abilities of radial velocity exoplanet surveys to detect the lowest-mass extra-solar planets are currently limited by a combination of instrument precision, lack of data, and "jitter". Jitter is a general term for any unknown features in the noise, and reflects a lack of detailed knowledge of stellar physics (asteroseismology, starspots, magnetic cycles, granulation, and other stellar surface phenomena), as well as the possible underestimation of instrument noise. We study an extensive set of radial velocities for the star HD 10700 ($τ$ Ceti) to determine the properties of the jitter arising from stellar surface inhomogeneities, activity, and telescope-instrument systems, and perform a comprehensive search for planetary signals in the radial velocities. We perform Bayesian comparisons of statistical models describing the radial velocity data to quantify the number of significant signals and the magnitude and properties of the excess noise in the data. We reach our goal by adding artificial signals to the "flat" radial velocity data of HD 10700 and by seeing which one of our statistical noise models receives the greatest posterior probabilities while still being able to extract the artificial signals correctly from the data. We utilise various noise components to assess properties of the noise in the data and analyse the HARPS, AAPS, and HIRES data for HD 10700 to quantify these properties and search for previously unknown low-amplitude Keplerian signals. ... △ Less

Submitted 18 December, 2012; originally announced December 2012.

Comments: 21 pages, 18 figures, accepted for publication in the Astronomy and Astrophysics

The Anglo-Australian Planet Search. XXII. Two New Multi-Planet Systems

Authors: Robert A. Wittenmyer, J. Horner, M. Tuomi, G. S. Salter, C. G. Tinney, R. P. Butler, H. R. A. Jones, S. J. O'Toole, J. Bailey, B. D. Carter, J. S. Jenkins, Z. Zhang, S. S. Vogt, E. J. Rivera

Abstract: We report the detection of two new planets from the Anglo-Australian Planet Search. These planets orbit two stars each previously known to host one planet. The new planet orbiting HD 142 has a period of 6005\pm427 days, and a minimum mass of 5.3M_Jup. HD142c is thus a new Jupiter analog: a gas-giant planet with a long period and low eccentricity (e = 0.21 \pm 0.07). The second planet in the HD 159… ▽ More We report the detection of two new planets from the Anglo-Australian Planet Search. These planets orbit two stars each previously known to host one planet. The new planet orbiting HD 142 has a period of 6005\pm427 days, and a minimum mass of 5.3M_Jup. HD142c is thus a new Jupiter analog: a gas-giant planet with a long period and low eccentricity (e = 0.21 \pm 0.07). The second planet in the HD 159868 system has a period of 352.3\pm1.3 days, and m sin i=0.73\pm0.05 M_Jup. In both of these systems, including the additional planets in the fitting process significantly reduced the eccentricity of the original planet. These systems are thus examples of how multiple-planet systems can masquerade as moderately eccentric single-planet systems. △ Less

Submitted 14 May, 2012; v1 submitted 12 May, 2012; originally announced May 2012.

Comments: 31 pages, 8 figures, accepted for publication in ApJ