-
An SNSPD-based detector system for NASA's Deep Space Optical Communications project
Authors:
Emma E. Wollman,
Jason P. Allmaras,
Andrew D. Beyer,
Boris Korzh,
Marcus C. Runyan,
Lautaro Narváez,
William H. Farr,
Francesco Marsili,
Ryan M. Briggs,
Gregory J. Miles,
Matthew D. Shaw
Abstract:
We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diame…
▽ More
We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diameter active area and embedded in an optical stack. The detector system also includes cryogenic optics for filtering and focusing the downlink signal and electronics for biasing the array and amplifying the output pulses. The detector system exhibits a peak system detection efficiency of 76% at 1550 nm, a background-limited false count rate as low as 3.7 kcps across the array, timing jitter less than 120 ps FWHM, and a maximum count rate of ~ 1 Gcps.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
tl;dr: Chill, y'all: AI Will Not Devour SE
Authors:
Eunsuk Kang,
Mary Shaw
Abstract:
Social media provide a steady diet of dire warnings that artificial intelligence (AI) will make software engineering (SE) irrelevant or obsolete. To the contrary, the engineering discipline of software is rich and robust; it encompasses the full scope of software design, development, deployment, and practical use; and it has regularly assimilated radical new offerings from AI. Current AI innovatio…
▽ More
Social media provide a steady diet of dire warnings that artificial intelligence (AI) will make software engineering (SE) irrelevant or obsolete. To the contrary, the engineering discipline of software is rich and robust; it encompasses the full scope of software design, development, deployment, and practical use; and it has regularly assimilated radical new offerings from AI. Current AI innovations such as machine learning, large language models (LLMs) and generative AI will offer new opportunities to extend the models and methods of SE. They may automate some routine development processes, and they will bring new kinds of components and architectures. If we're fortunate they may force SE to rethink what we mean by correctness and reliability. They will not, however, render SE irrelevant.
△ Less
Submitted 1 September, 2024;
originally announced September 2024.
-
Uncovering the Timescales of Spin Reorientation in $TbMn_{6}Sn_{6}$
Authors:
Sinéad A. Ryan,
Anya Grafov,
Na Li,
Hans T. Nembach,
Justin M. Shaw,
Hari Bhandari,
Tika Kafle,
Richa Sapkota,
Henry C. Kapteyn,
Nirmal J. Ghimire,
Margaret M. Murnane
Abstract:
$TbMn_{6}Sn_{6}…
▽ More
$TbMn_{6}Sn_{6}$ is a ferrimagnetic material which exhibits a highly unusual phase transition near room temperature where spins remain collinear while the total magnetic moment rotates from out-of-plane to in-plane. The mechanisms underlying this phenomenon have been studied in the quasi-static limit and the reorientation has been attributed to the competing anisotropies of Tb and Mn, whose magnetic moments have very different temperature dependencies. In this work, we present the first measurement of the spin-reorientation transition in $TbMn_{6}Sn_{6}$. By probing very small signals with the transverse magneto-optical Kerr effect (TMOKE) at the Mn M-edge, we show that the re-orientation timescale spans from 12 ps to 24 ps, depending on the laser excitation fluence. We then verify these data with a simple model of spin precession with a temperature-dependent magnetocrystalline anisotropy field to show that the spin reorientation timescale is consistent with the reorientation being driven by very large anisotropies energies on approximately $\approx$ meV scales. Promisingly, the model predicts a possibility of 180o reorientation of the out-of-plane moment over a range of excitation fluences. This could facilitate optically controlled magnetization switching between very stable ground states, which could have useful applications in spintronics or data storage.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
Design Spaces and How Software Designers Use Them: a sampler
Authors:
Mary Shaw,
Marian Petre
Abstract:
Discussions of software design often refer to using "design spaces" to describe the spectrum of available design alternatives. This supports design thinking in many ways: to capture domain knowledge, to support a wide variety of design activity, to analyze or predict properties of alternatives, to understand interactions and dependencies among design choices. We present a sampling of what designer…
▽ More
Discussions of software design often refer to using "design spaces" to describe the spectrum of available design alternatives. This supports design thinking in many ways: to capture domain knowledge, to support a wide variety of design activity, to analyze or predict properties of alternatives, to understand interactions and dependencies among design choices. We present a sampling of what designers, especially software designers, mean when they say "design space" and provide examples of the roles their design spaces serve in their design activity. This shows how design spaces can serve designers as lenses to reduce the overall space of possibilities and support systematic design decision making.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
Lowering Connectivity Requirements For Bivariate Bicycle Codes Using Morphing Circuits
Authors:
Mackenzie H. Shaw,
Barbara M. Terhal
Abstract:
Recently, Bravyi et al. [1] proposed a set of small quantum Bivariate Bicycle (BB) codes that achieve a similar circuit-level error rate to the surface code but with an improved encoding rate. In this work, we generalise a novel parity-check circuit design principle that we call morphing circuits (first introduced in [2]) and apply this methodology to BB codes. Our construction generates a new fam…
▽ More
Recently, Bravyi et al. [1] proposed a set of small quantum Bivariate Bicycle (BB) codes that achieve a similar circuit-level error rate to the surface code but with an improved encoding rate. In this work, we generalise a novel parity-check circuit design principle that we call morphing circuits (first introduced in [2]) and apply this methodology to BB codes. Our construction generates a new family of BB codes -- including a new $[[144,12,12]]$ "gross" code -- whose parity check circuits require a qubit connectivity of degree five instead of six. Intriguingly, each parity check circuit requires only 6 rounds of CNOT gates -- one fewer than in Ref. [1] -- even though our new codes have weight-9 stabilisers. We also show how to perform logical input/output circuits to an ancillary rotated surface code using morphing circuits, all within a biplanar layout. The new codes perform at least as well as those of Ref. [1] under uniform circuit-level noise when decoded using BP-OSD. Finally, we develop a general framework for designing morphing circuits and present a sufficient condition for its applicability to two-block group algebra codes.
[1] S. Bravyi, A. W. Cross, J. M. Gambetta, D. Maslov, P. Rall, and T. J. Yoder, Nature 627, 778 (2024).
[2] C. Gidney and C. Jones, New circuits and an open source decoder for the color code (2023), arXiv:2312.08813.
△ Less
Submitted 20 August, 2024; v1 submitted 23 July, 2024;
originally announced July 2024.
-
AHA! Strategies for Gaining Insights into Software Design
Authors:
Mary Shaw
Abstract:
These patterns describe the strategies I use to find novel or unorthodox insights in the area of software design and research. The patterns are driven by inconsistencies between what we say and what we do, and they provide techniques for finding actionable insights to address these inconsistencies. These insights may help to identify research opportunities; they may stimulate critiques of either r…
▽ More
These patterns describe the strategies I use to find novel or unorthodox insights in the area of software design and research. The patterns are driven by inconsistencies between what we say and what we do, and they provide techniques for finding actionable insights to address these inconsistencies. These insights may help to identify research opportunities; they may stimulate critiques of either research or practice; they may suggest new methods.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Learning about Data, Algorithms, and Algorithmic Justice on TikTok in Personally Meaningful Ways
Authors:
Luis Morales-Navarro,
Yasmin B. Kafai,
Ha Nguyen,
Kayla DesPortes,
Ralph Vacca,
Camillia Matuk,
Megan Silander,
Anna Amato,
Peter Woods,
Francisco Castro,
Mia Shaw,
Selin Akgun,
Christine Greenhow,
Antero Garcia
Abstract:
TikTok, a popular short video sharing application, emerged as the dominant social media platform for young people, with a pronounced influence on how young women and people of color interact online. The application has become a global space for youth to connect with each other, offering not only entertainment but also opportunities to engage with artificial intelligence/machine learning (AI/ML)-dr…
▽ More
TikTok, a popular short video sharing application, emerged as the dominant social media platform for young people, with a pronounced influence on how young women and people of color interact online. The application has become a global space for youth to connect with each other, offering not only entertainment but also opportunities to engage with artificial intelligence/machine learning (AI/ML)-driven recommendations and create content using AI/M-powered tools, such as generative AI filters. This provides opportunities for youth to explore and question the inner workings of these systems, their implications, and even use them to advocate for causes they are passionate about. We present different perspectives on how youth may learn in personally meaningful ways when engaging with TikTok. We discuss how youth investigate how TikTok works (considering data and algorithms), take into account issues of ethics and algorithmic justice and use their understanding of the platform to advocate for change.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
A Diagramming Technique for Teaching Students to Read Software Engineering Research Papers: an experience report
Authors:
Mary Shaw
Abstract:
Reading scientific research papers is a skill that many students do not learn before entering PhD programs, but it is critical to their success. This paper describes our diagramming technique for teaching this skill, which helps them identify the structure and the scientific argument of the paper. This has made our students more effective readers.
Reading scientific research papers is a skill that many students do not learn before entering PhD programs, but it is critical to their success. This paper describes our diagramming technique for teaching this skill, which helps them identify the structure and the scientific argument of the paper. This has made our students more effective readers.
△ Less
Submitted 4 May, 2024;
originally announced May 2024.
-
Observation of Gravitational Waves from the Coalescence of a $2.5\text{-}4.5~M_\odot$ Compact Object and a Neutron Star
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
A. G. Abac,
R. Abbott,
I. Abouelfettouh,
F. Acernese,
K. Ackley,
S. Adhicary,
N. Adhikari,
R. X. Adhikari,
V. K. Adkins,
D. Agarwal,
M. Agathos,
M. Aghaei Abchouyeh,
O. D. Aguiar,
I. Aguilar,
L. Aiello,
A. Ain,
P. Ajith,
S. Akçay,
T. Akutsu,
S. Albanesi,
R. A. Alfaidi,
A. Al-Jodah
, et al. (1771 additional authors not shown)
Abstract:
We report the observation of a coalescing compact binary with component masses $2.5\text{-}4.5~M_\odot$ and $1.2\text{-}2.0~M_\odot$ (all measurements quoted at the 90% credible level). The gravitational-wave signal GW230529_181500 was observed during the fourth observing run of the LIGO-Virgo-KAGRA detector network on 2023 May 29 by the LIGO Livingston Observatory. The primary component of the so…
▽ More
We report the observation of a coalescing compact binary with component masses $2.5\text{-}4.5~M_\odot$ and $1.2\text{-}2.0~M_\odot$ (all measurements quoted at the 90% credible level). The gravitational-wave signal GW230529_181500 was observed during the fourth observing run of the LIGO-Virgo-KAGRA detector network on 2023 May 29 by the LIGO Livingston Observatory. The primary component of the source has a mass less than $5~M_\odot$ at 99% credibility. We cannot definitively determine from gravitational-wave data alone whether either component of the source is a neutron star or a black hole. However, given existing estimates of the maximum neutron star mass, we find the most probable interpretation of the source to be the coalescence of a neutron star with a black hole that has a mass between the most massive neutron stars and the least massive black holes observed in the Galaxy. We provisionally estimate a merger rate density of $55^{+127}_{-47}~\text{Gpc}^{-3}\,\text{yr}^{-1}$ for compact binary coalescences with properties similar to the source of GW230529_181500; assuming that the source is a neutron star-black hole merger, GW230529_181500-like sources constitute about 60% of the total merger rate inferred for neutron star-black hole coalescences. The discovery of this system implies an increase in the expected rate of neutron star-black hole mergers with electromagnetic counterparts and provides further evidence for compact objects existing within the purported lower mass gap.
△ Less
Submitted 26 July, 2024; v1 submitted 5 April, 2024;
originally announced April 2024.
-
Logical Gates and Read-Out of Superconducting Gottesman-Kitaev-Preskill Qubits
Authors:
Mackenzie H. Shaw,
Andrew C. Doherty,
Arne L. Grimsmo
Abstract:
The Gottesman-Kitaev-Preskill (GKP) code is an exciting route to fault-tolerant quantum computing since Gaussian resources and GKP Pauli-eigenstate preparation are sufficient to achieve universal quantum computing. In this work, we provide a practical proposal to perform Clifford gates and state read-out in GKP codes implemented with active error correction in superconducting circuits. We present…
▽ More
The Gottesman-Kitaev-Preskill (GKP) code is an exciting route to fault-tolerant quantum computing since Gaussian resources and GKP Pauli-eigenstate preparation are sufficient to achieve universal quantum computing. In this work, we provide a practical proposal to perform Clifford gates and state read-out in GKP codes implemented with active error correction in superconducting circuits. We present a method of performing Clifford circuits without physically implementing any single-qubit gates, reducing the potential for them to spread errors in the system. In superconducting circuits, all the required two-qubit gates can be implemented with a single piece of hardware. We analyze the error-spreading properties of GKP Clifford gates and describe how a modification in the decoder following the implementation of each gate can reduce the gate infidelity by multiple orders of magnitude. Moreover, we develop a simple analytical technique to estimate the effect of loss and dephasing on GKP codes that matches well with numerics. Finally, we consider the effect of homodyne measurement inefficiencies on logical state read-out and present a scheme that implements a measurement with a $0.1\%$ error rate in $630$ ns assuming an efficiency of just~$75\%$.
△ Less
Submitted 5 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Element-specific and high-bandwidth ferromagnetic resonance spectroscopy with a coherent, extreme ultraviolet (EUV) source
Authors:
Michael Tanksalvala,
Anthony Kos,
Jacob Wisser,
Scott Diddams,
Hans T. Nembach,
Justin M. Shaw
Abstract:
We applied a tabletop, ultrafast, high-harmonic generation (HHG) source to measure the element-specific ferromagnetic resonance (FMR) in ultra-thin magnetic alloys and multilayers on an opaque Si substrate. We demonstrate a continuous wave bandwidth of 62 GHz, with promise to extend to 100 GHz or higher. This laboratory-scale instrument detects the FMR using ultrafast, extreme ultraviolet (EUV) li…
▽ More
We applied a tabletop, ultrafast, high-harmonic generation (HHG) source to measure the element-specific ferromagnetic resonance (FMR) in ultra-thin magnetic alloys and multilayers on an opaque Si substrate. We demonstrate a continuous wave bandwidth of 62 GHz, with promise to extend to 100 GHz or higher. This laboratory-scale instrument detects the FMR using ultrafast, extreme ultraviolet (EUV) light, with photon energies spanning the M-edges of most relevant magnetic elements. An RF frequency comb generator is used to produce a microwave excitation that is intrinsically synchronized to the EUV pulses with a timing jitter of 1.1 ps or better. We apply this system to measure the dynamics in a multilayer system as well as Ni-Fe and Co-Fe alloys. Since this instrument operates in reflection-mode, it is a milestone toward measuring and imaging the dynamics of the magnetic state and spin transport of active devices on arbitrary and opaque substrates. The higher bandwidth also enables measurements of materials with high magnetic anisotropy, as well as ferrimagnets, antiferromagnets, and short-wavelength (high wavevector) spinwaves in nanostructures or nanodevices. Furthermore, the coherence and short wavelength of the EUV will enable extending these studies using dynamic nanoscale lensless imaging techniques such as coherent diffractive imaging, ptychography, and holography.
△ Less
Submitted 23 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Frequency-domain multiplexing of SNSPDs with tunable superconducting resonators
Authors:
Sasha Sypkens,
Lorenzo Minutolo,
Sahil Patel,
Emanuel Knehr,
Alexander B. Walter,
Henry G. Leduc,
Lautaro Narváez,
Ralph Chamberlin,
Tracee Jamison-Hooks,
Matthew D. Shaw,
Peter K. Day,
Boris Korzh
Abstract:
This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias curr…
▽ More
This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias currents are very low, especially for mid- and far-infrared SNSPDs. Previous FDM schemes integrated the SNSPD within the resonator, while in this work we use an external resonator, which gives more flexibility to optimize the SNSPD architecture. The KPUP is a DC-biased superconducting resonator in which a nanowire is used as its inductive element to enable sensitivity to current perturbations. When coupled to an SNSPD, the KPUP can be used to read out current pulses on the few $μ$A scale. The KPUP is made out of NbTiN, which has high non-linear kinetic inductance for increased sensitivity at higher current bias and high operating temperature. Meanwhile, the SNSPD is made from WSi, which is a popular material for broadband SNSPDs. To read out the KPUP and SNSPD array, a software-defined radio platform and a graphics processing unit are used. Frequency Domain Multiplexed SNSPDs have applications in astronomy, remote sensing, exoplanet science, dark matter detection, and quantum sensing.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors
Authors:
Sahil R. Patel,
Marco Colangelo,
Andrew D. Beyer,
Gregor G. Taylor,
Jason P. Allmaras,
Emma E. Wollman,
Matthew D. Shaw,
Karl K. Berggren,
Boris Korzh
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
Quantum entanglement between optical and microwave photonic qubits
Authors:
Srujan Meesala,
David Lake,
Steven Wood,
Piero Chiappina,
Changchun Zhong,
Andrew D. Beyer,
Matthew D. Shaw,
Liang Jiang,
Oskar Painter
Abstract:
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled…
▽ More
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled optical and microwave photonic qubits. Our device platform integrates a piezo-optomechanical transducer with a superconducting resonator which is robust under optical illumination. We drive a photon-pair generation process and employ a dual-rail encoding intrinsic to our system to prepare entangled states of microwave and optical photons. We place a lower bound on the fidelity of the entangled state by measuring microwave and optical photons in two orthogonal bases. This entanglement source can directly interface telecom wavelength time-bin qubits and GHz frequency superconducting qubits, two well-established platforms for quantum communication and computation, respectively.
△ Less
Submitted 22 December, 2023; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Quantum Sensors for High Energy Physics
Authors:
Aaron Chou,
Kent Irwin,
Reina H. Maruyama,
Oliver K. Baker,
Chelsea Bartram,
Karl K. Berggren,
Gustavo Cancelo,
Daniel Carney,
Clarence L. Chang,
Hsiao-Mei Cho,
Maurice Garcia-Sciveres,
Peter W. Graham,
Salman Habib,
Roni Harnik,
J. G. E. Harris,
Scott A. Hertel,
David B. Hume,
Rakshya Khatiwada,
Timothy L. Kovachy,
Noah Kurinsky,
Steve K. Lamoreaux,
Konrad W. Lehnert,
David R. Leibrandt,
Dale Li,
Ben Loer
, et al. (17 additional authors not shown)
Abstract:
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Sta…
▽ More
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Standard Model itself including the Strong CP problem in QCD. Resulting experimental needs typically involve the measurement of very low energy impulses or low power periodic signals that are normally buried under large backgrounds. This report documents the findings of the 2023 Quantum Sensors for High Energy Physics workshop which identified enabling quantum information science technologies that could be utilized in future particle physics experiments, targeting high energy physics science goals.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Experimental high-dimensional entanglement certification and quantum steering with time-energy measurements
Authors:
Kai-Chi Chang,
Murat Can Sarihan,
Xiang Cheng,
Paul Erker,
Andrew Mueller,
Maria Spiropulu,
Matthew D. Shaw,
Boris Korzh,
Marcus Huber,
Chee Wei Wong
Abstract:
High-dimensional entanglement provides unique ways of transcending the limitations of current approaches in quantum information processing, quantum communications based on qubits. The generation of time-frequency qudit states offer significantly increased quantum capacities while keeping the number of photons constant, but pose significant challenges regarding the possible measurements for certifi…
▽ More
High-dimensional entanglement provides unique ways of transcending the limitations of current approaches in quantum information processing, quantum communications based on qubits. The generation of time-frequency qudit states offer significantly increased quantum capacities while keeping the number of photons constant, but pose significant challenges regarding the possible measurements for certification of entanglement. Here, we develop a new scheme and experimentally demonstrate the certification of 24-dimensional entanglement and a 9-dimensional quantum steering. We then subject our photon-pairs to dispersion conditions equivalent to the transmission through 600-km of fiber and still certify 21-dimensional entanglement. Furthermore, we use a steering inequality to prove 7-dimensional entanglement in a semi-device independent manner, proving that large chromatic dispersion is not an obstacle in distributing and certifying high-dimensional entanglement and quantum steering. Our highly scalable scheme is based on commercial telecommunication optical fiber components and recently developed low-jitter high-efficiency single-photon detectors, thus opening new pathways towards advanced large-scale quantum information processing and high-performance, noise-tolerant quantum communications with time-energy measurements
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
High-rate multiplexed entanglement source based on time-bin qubits for advanced quantum networks
Authors:
Andrew Mueller,
Samantha Davis,
Boris Korzh,
Raju Valivarthi,
Andrew D. Beyer,
Rahaf Youssef,
Neil Sinclair,
Cristián Peña,
Matthew D. Shaw,
Maria Spiropulu
Abstract:
Entanglement distribution based on time-bin qubits is an attractive option for emerging quantum networks. We demonstrate a 4.09 GHz repetition rate source of photon pairs entangled across early and late time bins separated by 80 ps. Simultaneous high rates and high visibilities are achieved through frequency multiplexing the spontaneous parametric down conversion output into 8 time-bin entangled p…
▽ More
Entanglement distribution based on time-bin qubits is an attractive option for emerging quantum networks. We demonstrate a 4.09 GHz repetition rate source of photon pairs entangled across early and late time bins separated by 80 ps. Simultaneous high rates and high visibilities are achieved through frequency multiplexing the spontaneous parametric down conversion output into 8 time-bin entangled pairs. We demonstrate entanglement visibilities as high as 99.4%, total entanglement rates up to 3.55e6 coincidences/s, and predict a straightforward path towards achieving up to an order of magnitude improvement in rates without compromising visibility. Finally, we resolve the density matrices of the entangled states for each multiplexed channel and express distillable entanglement rates in ebit/s, thereby quantifying the tradeoff between visibility and coincidence rates that contributes to useful entanglement distribution. This source is a fundamental building block for high-rate entanglement-based quantum key distribution systems or advanced quantum networks.
△ Less
Submitted 12 February, 2024; v1 submitted 3 October, 2023;
originally announced October 2023.
-
High-dimensional time-frequency entanglement in a singly-filtered biphoton frequency comb
Authors:
Xiang Cheng,
Kai-Chi Chang,
Murat Can Sarihan,
Andrew Mueller,
Maria Spiropulu,
Matthew D. Shaw,
Boris Korzh,
Andrei Faraon,
Franco N. C. Wong,
Jeffrey H. Shapiro,
Chee Wei Wong
Abstract:
High-dimensional quantum entanglement is a cornerstone for advanced technology enabling large-scale noise-tolerant quantum systems, fault-tolerant quantum computing, and distributed quantum networks. The recently developed biphoton frequency comb (BFC) provides a powerful platform for high-dimensional quantum information processing in its spectral and temporal quantum modes. Here we propose and ge…
▽ More
High-dimensional quantum entanglement is a cornerstone for advanced technology enabling large-scale noise-tolerant quantum systems, fault-tolerant quantum computing, and distributed quantum networks. The recently developed biphoton frequency comb (BFC) provides a powerful platform for high-dimensional quantum information processing in its spectral and temporal quantum modes. Here we propose and generate a singly-filtered high-dimensional BFC via spontaneous parametric down-conversion by spectrally shaping only the signal photons with a Fabry-Perot cavity. High-dimensional energy-time entanglement is verified through Franson-interference recurrences and temporal correlation with low-jitter detectors. Frequency- and temporal- entanglement of our singly-filtered BFC is then quantified by Schmidt mode decomposition. Subsequently, we distribute the high-dimensional singly-filtered BFC state over a 10 km fiber link with a post-distribution time-bin dimension lower bounded to be at least 168. Our demonstrations of high-dimensional entanglement and entanglement distribution show the capability of the singly-filtered quantum frequency comb for high-efficiency quantum information processing and high-capacity quantum networks.
△ Less
Submitted 11 September, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m
Authors:
Gregor G. Taylor,
Alexander B. Walter,
Boris Korzh,
Bruce Bumble,
Sahil R. Patel,
Jason P. Allmaras,
Andrew D. Beyer,
Roger O'Brient,
Matthew D. Shaw,
Emma E. Wollman
Abstract:
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second.…
▽ More
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
A superconducting-nanowire single-photon camera with 400,000 pixels
Authors:
Bakhrom G. Oripov,
Dana S. Rampini,
Jason Allmaras,
Matthew D. Shaw,
Sae Woo Nam,
Boris Korzh,
Adam N. McCaughan
Abstract:
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quant…
▽ More
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quantum computation and communication. Despite their appealing properties, however, there are currently no large-scale superconducting cameras - even the largest demonstrations have never exceeded 20 thousand pixels. This is especially true for one of the most promising detector technologies, the superconducting nanowire single-photon detector (SNSPD). These detectors have been demonstrated with system detection efficiencies of 98.0%, sub-3-ps timing jitter, sensitivity from the ultraviolet (250nm) to the mid-infrared (10um), and dark count rates below 6.2e-6 counts per second (cps), but despite more than two decades of development they have never achieved an array size larger than a kilopixel. Here, we report on the implementation and characterization of a 400,000 pixel SNSPD camera, a factor of 400 improvement over the previous state-of-the-art. The array spanned an area 4x2.5 mm with a 5x5um resolution, reached unity quantum efficiency at wavelengths of 370 nm and 635 nm, counted at a rate of 1.1e5 cps, and had a dark count rate of 1e-4 cps per detector (corresponding to 0.13 cps over the whole array). The imaging area contains no ancillary circuitry and the architecture is scalable well beyond the current demonstration, paving the way for large-format superconducting cameras with 100% fill factors and near-unity detection efficiencies across a vast range of the electromagnetic spectrum.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Entangled Photon Pair Source Demonstrator using the Quantum Instrumentation Control Kit System
Authors:
Si Xie,
Leandro Stefanazzi,
Christina Wang,
Cristian Pena,
Raju Valivarthi,
Lautaro Narvaez,
Gustavo Cancelo,
Keshav Kapoor,
Boris Korzh,
Matthew Shaw,
Panagiotis Spentzouris,
Maria Spiropulu
Abstract:
We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metr…
▽ More
We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metrics achieved using conventional waveform generators. We also demonstrate simultaneous detector readout using the digitization functional of QICK, achieving internal system synchronization time resolution of 3.2 ps. The work reported in this paper represents an explicit demonstration of the feasibility for replacing commercial waveform generators and time taggers with RFSoC-FPGA technology in the operation of a quantum network, representing a cost reduction of more than an order of magnitude.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Non-classical microwave-optical photon pair generation with a chip-scale transducer
Authors:
Srujan Meesala,
Steven Wood,
David Lake,
Piero Chiappina,
Changchun Zhong,
Andrew D. Beyer,
Matthew D. Shaw,
Liang Jiang,
Oskar Painter
Abstract:
Modern computing and communication technologies such as supercomputers and the internet are based on optically connected networks of microwave frequency information processors. In recent years, an analogous architecture has emerged for quantum networks with optically distributed entanglement between remote superconducting quantum processors, a leading platform for quantum computing. Here we report…
▽ More
Modern computing and communication technologies such as supercomputers and the internet are based on optically connected networks of microwave frequency information processors. In recent years, an analogous architecture has emerged for quantum networks with optically distributed entanglement between remote superconducting quantum processors, a leading platform for quantum computing. Here we report an important milestone towards such networks by observing non-classical correlations between photons in an optical link and a superconducting electrical circuit. We generate such states of light through a spontaneous parametric down-conversion (SPDC) process in a chip-scale piezo-optomechanical transducer. The non-classical nature of the emitted light is verified by observing anti-bunching in the microwave state conditioned on detection of an optical photon. Such a transducer can be readily connected to a superconducting quantum processor, and serve as a key building block for optical quantum networks of microwave frequency qubits.
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Evidence of extreme domain wall speeds under ultrafast optical excitation
Authors:
Rahul Jangid,
Nanna Zhou Hagström,
Meera Madhavi,
Kyle Rockwell,
Justin M. Shaw,
Jeffrey A. Brock,
Matteo Pancaldi,
Dario De Angelis,
Flavio Capotondi,
Emanuele Pedersoli,
Hans T. Nembach,
Mark W. Keller,
Stefano Bonetti,
Eric E. Fullerton,
Ezio Iacocca,
Roopali Kukreja,
Thomas J. Silva
Abstract:
Time-resolved ultrafast EUV magnetic scattering was used to test a recent prediction of >10 km/s domain wall speeds by optically exciting a magnetic sample with a nanoscale labyrinthine domain pattern. Ultrafast distortion of the diffraction pattern was observed at markedly different timescales compared to the magnetization quenching. The diffraction pattern distortion shows a threshold-dependence…
▽ More
Time-resolved ultrafast EUV magnetic scattering was used to test a recent prediction of >10 km/s domain wall speeds by optically exciting a magnetic sample with a nanoscale labyrinthine domain pattern. Ultrafast distortion of the diffraction pattern was observed at markedly different timescales compared to the magnetization quenching. The diffraction pattern distortion shows a threshold-dependence with laser fluence, not seen for magnetization quenching, consistent with a picture of domain wall motion with pinning sites. Supported by simulations, we show that a speed of $\approx$ 66 km/s for highly curved domain walls can explain the experimental data. While our data agree with the prediction of extreme, non-equilibrium wall speeds locally, it differs from the details of the theory, suggesting that additional mechanisms are required to fully understand these effects.
△ Less
Submitted 27 April, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared
Authors:
Jamie S. Luskin,
Ekkehart Schmidt,
Boris Korzh,
Andrew D. Beyer,
Bruce Bumble,
Jason P. Allmaras,
Alexander B. Walter,
Emma E. Wollman,
Lautaro Narváez,
Varun B. Verma,
Sae Woo Nam,
Ilya Charaev,
Marco Colangelo,
Karl K. Berggren,
Cristián Peña,
Maria Spiropulu,
Maurice Garcia-Sciveres,
Stephen Derenzo,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experime…
▽ More
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
Open Design Case Study -- A Crowdsourcing Effort to Curate Software Design Case Studies
Authors:
Chun Yong Chong,
Eunsuk Kang,
Mary Shaw
Abstract:
Case study-based learning has been successfully integrated into various courses, including software engineering education. In the context of software design courses, the use of case studies often entails sharing of real successful or failed software development. Using examples of real-world case studies allows educators to reinforce the applicability and usefulness of fundamental design concepts,…
▽ More
Case study-based learning has been successfully integrated into various courses, including software engineering education. In the context of software design courses, the use of case studies often entails sharing of real successful or failed software development. Using examples of real-world case studies allows educators to reinforce the applicability and usefulness of fundamental design concepts, relate the importance of evaluating design trade-offs with respect to stakeholders' requirements, and highlight the importance of upfront design where students that lack industrial experience tend to overlook. However, the use of real-world case studies is not straightforward because 1.) there is a lack of open source repositories for real software design case studies and 2.) even if case studies are available, they are often reported without a standardized format, which may hinder the alignment between the case and the desired learning outcomes. To address the lack of software design case studies for educational purposes, we propose the idea of Open Design Case Study, a repository to crowdsource, curate, and recruit other educators to contribute case studies for teaching software design courses. The platform will also allow educators and students to share, brainstorm, and discuss design solutions based on case studies shared publicly on the repository.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Stabilizer subsystem decompositions for single- and multi-mode Gottesman-Kitaev-Preskill codes
Authors:
Mackenzie H. Shaw,
Andrew C. Doherty,
Arne L. Grimsmo
Abstract:
The Gottesman-Kitaev-Preskill (GKP) error correcting code encodes a finite dimensional logical space in one or more bosonic modes, and has recently been demonstrated in trapped ions and superconducting microwave cavities. In this work we introduce a new subsystem decomposition for GKP codes that we call the stabilizer subsystem decomposition, analogous to the usual approach to quantum stabilizer c…
▽ More
The Gottesman-Kitaev-Preskill (GKP) error correcting code encodes a finite dimensional logical space in one or more bosonic modes, and has recently been demonstrated in trapped ions and superconducting microwave cavities. In this work we introduce a new subsystem decomposition for GKP codes that we call the stabilizer subsystem decomposition, analogous to the usual approach to quantum stabilizer codes. The decomposition has the defining property that a partial trace over the non-logical stabilizer subsystem is equivalent to an ideal decoding of the logical state. We describe how to decompose arbitrary states across the subsystem decomposition using a set of transformations that move between the decompositions of different GKP codes. Besides providing a convenient theoretical view on GKP codes, such a decomposition is also of practical use. We use the stabilizer subsystem decomposition to efficiently simulate noise acting on single-mode GKP codes, and in contrast to more conventional Fock basis simulations, we are able to to consider essentially arbitrarily large photon numbers for realistic noise channels such as loss and dephasing.
△ Less
Submitted 9 January, 2024; v1 submitted 26 October, 2022;
originally announced October 2022.
-
High-speed detection of 1550 nm single photons with superconducting nanowire detectors
Authors:
Ioana Craiciu,
Boris Korzh,
Andrew D. Beyer,
Andrew Mueller,
Jason P. Allmaras,
Lautaro Narváez,
Maria Spiropulu,
Bruce Bumble,
Thomas Lehner,
Emma E. Wollman,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-cou…
▽ More
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Time-walk and jitter correction in SNSPDs at high count rates
Authors:
Andrew Mueller,
Emma E. Wollman,
Boris Korzh,
Andrew D. Beyer,
Lautaro Narvaez,
Ryan Rogalin,
Maria Spiropulu,
Matthew D. Shaw
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timin…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timing measurements. To compensate for this, we demonstrate a calibration method that correlates delays in detection events with the time elapsed between pulses. The increase in jitter at high rates can be largely canceled in software by applying corrections derived from the calibration process. We demonstrate our method with a single-pixel tungsten silicide SNSPD and show it decreases high count rate jitter. The technique is especially effective at removing a long tail that appears in the instrument response function at high count rates. At a count rate of 11.4 MCounts/s we reduce the full width at one percent maximum level (FW1%M) by 45%. The method therefore enables certain quantum communication protocols that are rate-limited by the (FW1%M) metric to operate almost twice as fast. \c{opyright} 2022. All rights reserved.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories
Authors:
Keshav Kapoor,
Si Xie,
Joaquin Chung,
Raju Valivarthi,
Cristián Peña,
Lautaro Narváez,
Neil Sinclair,
Jason P. Allmaras,
Andrew D. Beyer,
Samantha I. Davis,
Gabriel Fabre,
George Iskander,
Gregory S. Kanter,
Rajkumar Kettimuthu,
Boris Korzh,
Prem Kumar,
Nikolai Lauk,
Andrew Mueller,
Matthew Shaw,
Panagiotis Spentzouris,
Maria Spiropulu,
Jordan M. Thomas,
Emma E. Wollman
Abstract:
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-t…
▽ More
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Engineering of Heterostructure Pt/Co/AlOx for the enhancement of Dyzaloshinskii-Moria interaction
Authors:
Babu Ram Sankhi,
Elena Echeverria,
Hans T. Nembach,
Justin M. Shaw,
Soumya Mandal,
Muhammet Annaorazov,
Ritesh Sachan,
David N. Mcllroy,
D. Meyers,
Emrah Turgut
Abstract:
The interfacial Dyzaloshinskii-Moria interaction (DMI) helps to stabilize chiral domain walls and magnetic skyrmions, which will facilitate new magnetic memories and spintronics logic devices. The study of interfacial DMI in perpendicularly magnetized structurally asymmetric heavy metal (HM) / ferromagnetic (FM) multilayer systems is of high importance due to the formation of chiral magnetic textu…
▽ More
The interfacial Dyzaloshinskii-Moria interaction (DMI) helps to stabilize chiral domain walls and magnetic skyrmions, which will facilitate new magnetic memories and spintronics logic devices. The study of interfacial DMI in perpendicularly magnetized structurally asymmetric heavy metal (HM) / ferromagnetic (FM) multilayer systems is of high importance due to the formation of chiral magnetic textures in the presence of DMI. Here, we report the impact of the cobalt oxidation at the cobalt -aluminum oxide interface in Pt/Co/AlOx trilayer structure on the DMI by varying the post-growth annealing time and Aluminum thickness. For quantifying DMI, we employed magneto-optical imaging of asymmetric domain wall expansion, hysteresis loop shift, and spin-wave spectroscopy techniques. We further correlated the Cobalt oxidation with low-temperature Hall effect measurements and X-ray photoelectron spectroscopy. Our results emphasize the characterization of magnetic films for MRAM technologies semiconductor temperature process window, where magnetic interaction will be critical for device performance.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Automated Detection of Acute Promyelocytic Leukemia in Blood Films and Bone Marrow Aspirates with Annotation-free Deep Learning
Authors:
Petru Manescu,
Priya Narayanan,
Christopher Bendkowski,
Muna Elmi,
Remy Claveau,
Vijay Pawar,
Biobele J. Brown,
Mike Shaw,
Anupama Rao,
Delmiro Fernandez-Reyes
Abstract:
While optical microscopy inspection of blood films and bone marrow aspirates by a hematologist is a crucial step in establishing diagnosis of acute leukemia, especially in low-resource settings where other diagnostic modalities might not be available, the task remains time-consuming and prone to human inconsistencies. This has an impact especially in cases of Acute Promyelocytic Leukemia (APL) tha…
▽ More
While optical microscopy inspection of blood films and bone marrow aspirates by a hematologist is a crucial step in establishing diagnosis of acute leukemia, especially in low-resource settings where other diagnostic modalities might not be available, the task remains time-consuming and prone to human inconsistencies. This has an impact especially in cases of Acute Promyelocytic Leukemia (APL) that require urgent treatment. Integration of automated computational hematopathology into clinical workflows can improve the throughput of these services and reduce cognitive human error. However, a major bottleneck in deploying such systems is a lack of sufficient cell morphological object-labels annotations to train deep learning models. We overcome this by leveraging patient diagnostic labels to train weakly-supervised models that detect different types of acute leukemia. We introduce a deep learning approach, Multiple Instance Learning for Leukocyte Identification (MILLIE), able to perform automated reliable analysis of blood films with minimal supervision. Without being trained to classify individual cells, MILLIE differentiates between acute lymphoblastic and myeloblastic leukemia in blood films. More importantly, MILLIE detects APL in blood films (AUC 0.94+/-0.04) and in bone marrow aspirates (AUC 0.99+/-0.01). MILLIE is a viable solution to augment the throughput of clinical pathways that require assessment of blood film microscopy.
△ Less
Submitted 20 March, 2022;
originally announced March 2022.
-
Picosecond synchronization system for quantum networks
Authors:
Raju Valivarthi,
Lautaro Narváez,
Samantha I. Davis,
Nikolai Lauk,
Cristián Peña,
Si Xie,
Jason P. Allmaras,
Andrew D. Beyer,
Boris Korzh,
Andrew Mueller,
Mandy Rominsky,
Matthew Shaw,
Emma E. Wollman,
Panagiotis Spentzouris,
Daniel Oblak,
Neil Sinclair,
Maria Spiropulu
Abstract:
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system…
▽ More
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
Simultaneous measurement of the exchange parameter and saturation magnetization using propagating spin waves
Authors:
Grant A. Riley,
Justin M. Shaw,
Thomas J. Silva,
Hans T. Nembach
Abstract:
The exchange interaction in ferromagnetic ultra-thin films is a critical parameter in magnetization-based storage and logic devices, yet the accurate measurement of it remains a challenge. While a variety of approaches are currently used to determine the exchange parameter, each has its limitations, and good agreement among them has not been achieved. To date, neutron scattering, magnetometry, Bri…
▽ More
The exchange interaction in ferromagnetic ultra-thin films is a critical parameter in magnetization-based storage and logic devices, yet the accurate measurement of it remains a challenge. While a variety of approaches are currently used to determine the exchange parameter, each has its limitations, and good agreement among them has not been achieved. To date, neutron scattering, magnetometry, Brillouin light scattering, spin-torque ferromagnetic resonance spectroscopy, and Kerr microscopy have all been used to determine the exchange parameter. Here we present a novel method that exploits the wavevector selectivity of Brillouin light scattering to measure the spin wave dispersion in both the backward volume and Damon-Eshbach orientations. The exchange, saturation magnetization, and magnetic thickness are then determined by a simultaneous fit of both dispersion branches with general spin wave theory without any prior knowledge of the thickness of a magnetic "dead layer". In this work, we demonstrate the strength of this technique for ultrathin metallic films, typical of those commonly used in industrial applications for magnetic random-access memory.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Megahertz-rate Ultrafast X-ray Scattering and Holographic Imaging at the European XFEL
Authors:
Nanna Zhou Hagström,
Michael Schneider,
Nico Kerber,
Alexander Yaroslavtsev,
Erick Burgos Parra,
Marijan Beg,
Martin Lang,
Christian M. Günther,
Boris Seng,
Fabian Kammerbauer,
Horia Popescu,
Matteo Pancaldi,
Kumar Neeraj,
Debanjan Polley,
Rahul Jangid,
Stjepan B. Hrkac,
Sheena K. K. Patel,
Sergei Ovcharenko,
Diego Turenne,
Dmitriy Ksenzov,
Christine Boeglin,
Igor Pronin,
Marina Baidakova,
Clemens von Korff Schmising,
Martin Borchert
, et al. (75 additional authors not shown)
Abstract:
The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we presen…
▽ More
The advent of X-ray free-electron lasers (XFELs) has revolutionized fundamental science, from atomic to condensed matter physics, from chemistry to biology, giving researchers access to X-rays with unprecedented brightness, coherence, and pulse duration. All XFEL facilities built until recently provided X-ray pulses at a relatively low repetition rate, with limited data statistics. Here, we present the results from the first megahertz repetition rate X-ray scattering experiments at the Spectroscopy and Coherent Scattering (SCS) instrument of the European XFEL. We illustrate the experimental capabilities that the SCS instrument offers, resulting from the operation at MHz repetition rates and the availability of the novel DSSC 2D imaging detector. Time-resolved magnetic X-ray scattering and holographic imaging experiments in solid state samples were chosen as representative, providing an ideal test-bed for operation at megahertz rates. Our results are relevant and applicable to any other non-destructive XFEL experiments in the soft X-ray range.
△ Less
Submitted 20 January, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Key points in the determination of the interfacial Dzyaloshinskii-Moriya interaction from asymmetric bubble domain expansion
Authors:
A. Magni,
G. Carlotti,
A. Casiraghi,
E. Darwin,
G. Durin,
L. Herrera Diez,
B. J. Hickey,
A. Huxtable,
C. Y. Hwang,
G. Jakob,
C. Kim,
M. Kläui,
J. Langer,
C. H. Marrows,
H. T. Nembach,
D. Ravelosona,
G. A. Riley,
J. M. Shaw,
V. Sokalski,
S. Tacchi,
M. Kuepferling
Abstract:
Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity prof…
▽ More
Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity profile when the DW roughness is high. Our results demonstrate that the DW roughness and the interface roughness of the sample layers are correlated. Furthermore, we give guidance on how to obtain reliable results for the DMI value with this popular method. A comparison of the results with Brillouin light scattering (BLS) measurements on the same samples shows that the BLS approach often results in higher measured values of DMI.
△ Less
Submitted 13 January, 2022;
originally announced January 2022.
-
Improved heralded single-photon source with a photon-number-resolving superconducting nanowire detector
Authors:
Samantha I. Davis,
Andrew Mueller,
Raju Valivarthi,
Nikolai Lauk,
Lautaro Narvaez,
Boris Korzh,
Andrew D. Beyer,
Marco Colangelo,
Karl K. Berggren,
Matthew D. Shaw,
Neil Sinclair,
Maria Spiropulu
Abstract:
Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an effici…
▽ More
Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an efficient and low noise photon-number-resolving superconducting nanowire detector we herald, in real time, a single photon at telecommunication wavelength. We perform a second-order photon correlation $g^{2}(0)$ measurement of the signal mode conditioned on the measured photon number of the idler mode for various pump powers and demonstrate an improvement of a heralded single-photon source. We develop an analytical model using a phase-space formalism that encompasses all multiphoton effects and relevant imperfections, such as loss and multiple Schmidt modes. We perform a maximum-likelihood fit to test the agreement of the model to the data and extract the best-fit mean photon number $μ$ of the pair source for each pump power. A maximum reduction of $0.118 \pm 0.012$ in the photon $g^{2}(0)$ correlation function at $μ= 0.327 \pm 0.007$ is obtained, indicating a strong suppression of multiphoton emissions. For a fixed $g^{2}(0) = 7e-3$, we increase the single pair generation probability by 25%. Our experiment, built using fiber-coupled and off-the-shelf components, delineates a path to engineering ideal sources of single photons.
△ Less
Submitted 8 January, 2023; v1 submitted 21 December, 2021;
originally announced December 2021.
-
Symmetry-dependent ultrafast manipulation of nanoscale magnetic domains
Authors:
Nanna Zhou Hagström,
Rahul Jangid,
Meera,
Diego Turenne,
Jeffrey Brock,
Erik S. Lamb,
Boyan Stoychev,
Justine Schlappa,
Natalia Gerasimova,
Benjamin Van Kuiken,
Rafael Gort,
Laurent Mercadier,
Loïc Le Guyader,
Andrey Samartsev,
Andreas Scherz,
Giuseppe Mercurio,
Hermann A. Dürr,
Alexander H. Reid,
Monika Arora,
Hans T. Nembach,
Justin M. Shaw,
Emmanuelle Jal,
Eric E. Fullerton,
Mark W. Keller,
Roopali Kukreja
, et al. (3 additional authors not shown)
Abstract:
Symmetry is a powerful concept in physics, but its applicability to far-from-equilibrium states is still being understood. Recent attention has focused on how far-from-equilibrium states lead to spontaneous symmetry breaking. Conversely, ultrafast optical pumping can be used to drastically change the energy landscape and quench the magnetic order parameter in magnetic systems. Here, we find a dist…
▽ More
Symmetry is a powerful concept in physics, but its applicability to far-from-equilibrium states is still being understood. Recent attention has focused on how far-from-equilibrium states lead to spontaneous symmetry breaking. Conversely, ultrafast optical pumping can be used to drastically change the energy landscape and quench the magnetic order parameter in magnetic systems. Here, we find a distinct symmetry-dependent ultrafast behaviour by use of ultrafast x-ray scattering from magnetic patterns with varying degrees of isotropic and anisotropic symmetry. After pumping with an optical laser, the scattered intensity reveals a radial shift exclusive to the isotropic component and exhibits a faster recovery time from quenching for the anisotropic component. These features arise even when both symmetry components are concurrently measured, suggesting a correspondence between the excitation and the magnetic order symmetry. Our results underline the importance of symmetry as a critical variable to manipulate the magnetic order in the ultrafast regime.
△ Less
Submitted 17 December, 2021;
originally announced December 2021.
-
The thermally-coupled imager: A scalable readout architecture for superconducting nanowire single photon detectors
Authors:
Adam N. McCaughan,
Yao Zhai,
Boris Korzh,
Jason P. Allmaras,
Bakhrom G. Oripov,
Matthew D. Shaw,
Sae Woo Nam
Abstract:
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-fl…
▽ More
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-flight delay lines and thermal coupling to create a scalable architecture that can scale to large array sizes, allows neighboring detectors to operate independently, and requires only four microwave readout lines to operate no matter the size of the array. We give an overview of how the architecture functions, and demonstrate a proof-of-concept $32\times32$ imaging array. The array was able to image a free-space focused spot at 373 nm, count at 9.6 Mcps, and resolve photon location with greater than 99.83\% distinguishability.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Skyrmions in synthetic antiferromagnets and their nucleation via electrical current and ultrafast laser illumination
Authors:
Roméo Juge,
Naveen Sisodia,
Joseba Urrestarazu Larrañaga,
Qiang Zhang,
Van Tuong Pham,
Kumari Gaurav Rana,
Brice Sarpi,
Nicolas Mille,
Stefan Stanescu,
Rachid Belkhou,
Mohamad-Assaad Mawass,
Nina Novakovic-Marinkovic,
Florian Kronast,
Markus Weigand,
Joachim Gräfe,
Sebastian Wintz,
Simone Finizio,
Jörg Raabe,
Lucia Aballe,
Michael Foerster,
Mohamed Belmeguenai,
Liliana Buda-Prejbeanu,
Justin M. Shaw,
Hans T. Nembach,
Laurent Ranno
, et al. (2 additional authors not shown)
Abstract:
Magnetic skyrmions are topological spin textures that hold great promise as nanoscale information carriers in non-volatile memory and logic devices. While room-temperature magnetic skyrmions and their current-induced manipulation were recently demonstrated, the stray field resulting from their finite magnetization as well as their topological charge limit their minimum size and reliable motion in…
▽ More
Magnetic skyrmions are topological spin textures that hold great promise as nanoscale information carriers in non-volatile memory and logic devices. While room-temperature magnetic skyrmions and their current-induced manipulation were recently demonstrated, the stray field resulting from their finite magnetization as well as their topological charge limit their minimum size and reliable motion in tracks. Antiferromagnetic (AF) skyrmions allow these limitations to be lifted owing to their vanishing magnetization and net zero topological charge, promising room-temperature, ultrasmall skyrmions, fast dynamics, and insensitivity to external magnetic fields. While room-temperature AF spin textures have been recently demonstrated, the observation and controlled nucleation of AF skyrmions operable at room temperature in industry-compatible synthetic antiferromagnetic (SAF) material systems is still lacking. Here we demonstrate that isolated skyrmions can be stabilized at zero field and room temperature in a fully compensated SAF. Using X-ray microscopy techniques, we are able to observe the skyrmions in the different SAF layers and demonstrate their antiparallel alignment. The results are substantiated by micromagnetic simulations and analytical models using experimental parameters, which confirm the chiral SAF skyrmion spin texture and allow the identification of the physical mechanisms that control the SAF skyrmion size and stability. We also demonstrate the local nucleation of SAF skyrmions via local current injection as well as ultrafast laser excitations at zero field. These results will enable the utilization of SAF skyrmions in skyrmion-based devices.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Roadmap on Spin-Wave Computing
Authors:
A. V. Chumak,
P. Kabos,
M. Wu,
C. Abert,
C. Adelmann,
A. Adeyeye,
J. Åkerman,
F. G. Aliev,
A. Anane,
A. Awad,
C. H. Back,
A. Barman,
G. E. W. Bauer,
M. Becherer,
E. N. Beginin,
V. A. S. V. Bittencourt,
Y. M. Blanter,
P. Bortolotti,
I. Boventer,
D. A. Bozhko,
S. A. Bunyaev,
J. J. Carmiggelt,
R. R. Cheenikundil,
F. Ciubotaru,
S. Cotofana
, et al. (91 additional authors not shown)
Abstract:
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the…
▽ More
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the academic domain, the scientific and technological challenges of the field are being extensively investigated, and many proof-of-concept prototypes have already been realized in laboratories. This roadmap is a product of the collective work of many authors that covers versatile spin-wave computing approaches, conceptual building blocks, and underlying physical phenomena. In particular, the roadmap discusses the computation operations with Boolean digital data, unconventional approaches like neuromorphic computing, and the progress towards magnon-based quantum computing. The article is organized as a collection of sub-sections grouped into seven large thematic sections. Each sub-section is prepared by one or a group of authors and concludes with a brief description of the current challenges and the outlook of the further development of the research directions.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Faraday rotation study of plasma bubbles in GeV wakefield accelerators
Authors:
Y. Y. Chang,
X. Cheng,
A. Hannasch,
M. LaBerge,
J. M. Shaw,
K. Weichman,
J. Welch,
A. Bernstein,
W. Henderson,
R. Zgadzaj,
M. C. Downer
Abstract:
We visualize plasma bubbles driven by 0.67 PW laser pulses in plasma of density $n_e \approx 5\times10^{17}$ ${\rm cm}^{-3}$ by imaging Faraday rotation patterns imprinted on linearly-polarized probe pulses of wavelength $λ_{pr} = 1.05 μ$m and duration $τ_{pr} = 2$ ps or $1$ ps that cross the bubble's path at right angles. When the bubble captures and accelerates tens to hundreds of pC of electron…
▽ More
We visualize plasma bubbles driven by 0.67 PW laser pulses in plasma of density $n_e \approx 5\times10^{17}$ ${\rm cm}^{-3}$ by imaging Faraday rotation patterns imprinted on linearly-polarized probe pulses of wavelength $λ_{pr} = 1.05 μ$m and duration $τ_{pr} = 2$ ps or $1$ ps that cross the bubble's path at right angles. When the bubble captures and accelerates tens to hundreds of pC of electron charge, we observe two parallel streaks of length $cτ_{pr}$ straddling the drive pulse propagation axis, separated by $\sim45$ $μ$m, in which probe polarization rotates by $0.3^\circ$ to more than $5^\circ$ in opposite directions. Accompanying simulations show that they result from Faraday rotation within portions of dense bubble side walls that are pervaded by the azimuthal magnetic field of accelerating electrons during the probe transit across the bubble. Analysis of the width of the streaks shows that quasi-monoenergetic high-energy electrons and trailing lower energy electrons inside the bubble contribute distinguishable portions of the observed signals, and that relativistic flow of sheath electrons suppresses Faraday rotation from the rear of the bubble. The results demonstrate favorable scaling of Faraday rotation diagnostics to $40\times$ lower plasma density than previously demonstrated.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
Mineral Processing and Metal Extraction on the Lunar Surface -- Challenges and Opportunities
Authors:
Matthew G. Shaw,
Matthew S. Humbert,
Geoffrey A. Brooks,
Akbar Rhamdhani,
Alan R. Duffy,
Mark I. Pownceby
Abstract:
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper we review the metals available for extraction and conditions at the lunar surface, and analyse the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the…
▽ More
The lunar surface is extremely harsh and current mineral processing and metal extraction technologies are not adequately equipped to address this environment. In this paper we review the metals available for extraction and conditions at the lunar surface, and analyse the challenges associated with comminution, beneficiation, and metal extraction operations. The potential beneficial effects of the natural lunar conditions are also evaluated. This investigation concludes that process plant design on the lunar surface will favour lightweight, schematically simple flow sheets that enable automation, and that utilise the local environment wherever possible. The elimination of traditional comminution and beneficiation stages and their replacement with basic classification could be economically favourable. The most promising metal reduction pathways are identified as molten regolith electrolysis, and vacuum thermal dissociation, other processes with merit are hydrogen reduction, carbothermal reduction, and solid electrolysis. Finally, it is identified that a significant research effort in all areas of astrometallurgy will be required before industrial-sized extra-terrestrial mineral processing and metal extraction operations will be viable.
△ Less
Submitted 5 September, 2021;
originally announced September 2021.
-
Impedance-matched differential superconducting nanowire detectors
Authors:
Marco Colangelo,
Boris Korzh,
Jason P. Allmaras,
Andrew D. Beyer,
Andrew S. Mueller,
Ryan M. Briggs,
Bruce Bumble,
Marcus Runyan,
Martin J. Stevens,
Adam N. McCaughan,
Di Zhu,
Stephen Smith,
Wolfgang Becker,
Lautaro Narváez,
Joshua C. Bienfang,
Simone Frasca,
Angel E. Velasco,
Cristián H. Peña,
Edward E. Ramirez,
Alexander B. Walter,
Ekkehart Schmidt,
Emma E. Wollman,
Maria Spiropulu,
Richard Mirin,
Sae Woo Nam
, et al. (2 additional authors not shown)
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Brillouin Light Scattering from Quantized Spin Waves in Nanowires with Antisymmetric Exchange Interactions
Authors:
Jun-Wen Xu,
Grant A. Riley,
Justin M. Shaw,
Hans T. Nembach,
Andrew D. Kent
Abstract:
Antisymmetric exchange interactions lead to non-reciprocal spin-wave propagation. As a result, spin waves confined in a nanostructure are not standing waves; they have a time-dependent phase, because counter-propagating waves of the same frequency have different wavelengths. We report on a Brillouin light scattering (BLS) study of confined spin waves in Co/Pt nanowires with strong Dzyaloshinskii-M…
▽ More
Antisymmetric exchange interactions lead to non-reciprocal spin-wave propagation. As a result, spin waves confined in a nanostructure are not standing waves; they have a time-dependent phase, because counter-propagating waves of the same frequency have different wavelengths. We report on a Brillouin light scattering (BLS) study of confined spin waves in Co/Pt nanowires with strong Dzyaloshinskii-Moriya interactions (DMI). Spin-wave quantization in narrow ($\lesssim 200$ nm width) wires dramatically reduces the frequency shift between BLS Stokes and anti-Stokes lines associated with the scattering of light incident transverse to the nanowires. In contrast, the BLS frequency shift associated with the scattering of spin waves propagating along the nanowire length is independent of nanowire width. A model that considers the chiral nature of modes captures this physics and predicts a dramatic reduction in frequency shift of light scattered from higher energy spin waves in narrow wires, which is confirmed by our experiments.
△ Less
Submitted 28 July, 2022; v1 submitted 21 July, 2021;
originally announced July 2021.
-
A mutually beneficial approach to electricity network pricing in the presence of large amounts of solar power and community-scale energy storage
Authors:
B. C. P. Sturmberg,
M. E. Shaw,
C. P. Mediwaththe,
H. Ransan-Cooper,
B. Weise,
M. Thomas,
L. Blackhall
Abstract:
Electricity distribution networks that contain large photovoltaic solar systems can experience power flows between customers. These may create both technical and socio-economic challenges. This paper establishes how these challenges can be addressed through the combined deployment of Community-scale Energy Storage (CES) and local network tariffs. Our study simulates the operation of a CES under a…
▽ More
Electricity distribution networks that contain large photovoltaic solar systems can experience power flows between customers. These may create both technical and socio-economic challenges. This paper establishes how these challenges can be addressed through the combined deployment of Community-scale Energy Storage (CES) and local network tariffs. Our study simulates the operation of a CES under a range of local network tariff models, using current Australian electricity prices and current network prices as a reference. We assess the financial outcomes for solar and non-solar owning customers and the distribution network operator. We find that tariff settings exist that create mutual benefits for all stakeholders. Such tariffs all apply a discount of greater than 50\% to energy flows within the local network, relative to regular distribution network tariffs. The policy implication of these findings is that the, historically contentious, issue of network tariff reform in the presence of local solar power generation can be resolved with a mutually beneficial arrangement of local network tariffs and CES. Furthermore, the challenge of setting appropriate tariffs is eased through clear and intuitive conditions on local network tariff pricing.
△ Less
Submitted 5 September, 2021; v1 submitted 10 June, 2021;
originally announced July 2021.
-
Extendability and the $\overline \partial$ Operator on the Hartogs Triangle
Authors:
Almut Burchard,
Joshua Flynn,
Guozhen Lu,
Mei-Chi Shaw
Abstract:
In this paper it is shown that the Hartogs triangle $\mathbf T$ in $\mathbf C^2$ is a uniform domain. This implies that the Hartogs triangle is a Sobolev extension domain. Furthermore, the weak and strong maximal extensions of the Cauchy-Riemann operator agree on the Hartogs triangle. These results have numerous applications. Among other things, they are used to study the Dolbeault cohomology grou…
▽ More
In this paper it is shown that the Hartogs triangle $\mathbf T$ in $\mathbf C^2$ is a uniform domain. This implies that the Hartogs triangle is a Sobolev extension domain. Furthermore, the weak and strong maximal extensions of the Cauchy-Riemann operator agree on the Hartogs triangle. These results have numerous applications. Among other things, they are used to study the Dolbeault cohomology groups with Sobolev coefficients on the complement of $\mathbf T$.
△ Less
Submitted 27 January, 2022; v1 submitted 17 June, 2021;
originally announced June 2021.
-
How fast do microdroplets generated during liquid-liquid phase separation move in a confined 2D space?
Authors:
Gilmar F. Arends,
John M. Shaw,
Xuehua Zhang
Abstract:
How liquid transport occurs in confined spaces is relevant to many industrial and lab-scale processes, ranging from enhanced oil recovery to drug delivery systems. In this work, we investigate propelling microdroplets that form from liquid-liquid phase separation in a quasi-2D chamber, focusing on the direction and speed of microdroplets in response to local composition gradients. The confined ter…
▽ More
How liquid transport occurs in confined spaces is relevant to many industrial and lab-scale processes, ranging from enhanced oil recovery to drug delivery systems. In this work, we investigate propelling microdroplets that form from liquid-liquid phase separation in a quasi-2D chamber, focusing on the direction and speed of microdroplets in response to local composition gradients. The confined ternary solution in our experiments comprises a model oil, a good solvent (ethanol) and a poor solvent (water). Depending on the initial solution composition, water-rich or oil-rich microdroplets, form and move spontaneously as the ternary solution mixes with and is displaced by water diffusing from a deep side channel. Microdroplet movement is followed in situ using high-speed bright-field imaging or fluorescence imaging when the solution is doped with a dye. Local ethanol composition gradients are estimated from the variation of fluorescence intensity in the local continuous liquid surrounding the mobile microdroplets. From phase separation of the ternary solution with high oil concentration, mobile oil-rich microdroplets form in a water-rich zone, accompanying the formation of water-rich microdroplets in an oil-rich zone. The fast movement of oil-rich microdroplets induces directional flow transport that mobilizes water-rich microdroplets close to the water-rich zone. The average microdroplet speed increases with the initial oil concentration in the ternary solution. The fastest speed of oil-rich microdroplets observed in our experiments is ~150 $μ$m/s along the surface of a hydrophobic wall. The presence of a sharp ethanol composition gradient is the primary driving force for the fast movement of oil-rich microdroplets in confinement. Our results demonstrate the potential of enhancing liquid transport in confinement through composition gradients arising from phase separation.
△ Less
Submitted 13 June, 2021;
originally announced June 2021.
-
Autonomous object harvesting using synchronized optoelectronic microrobots
Authors:
Christopher Bendkowski,
Laurent Mennillo,
Tao Xu,
Mohamed Elsayed,
Filip Stojic,
Harrison Edwards,
Shuailong Zhang,
Cindi Morshead,
Vijay Pawar,
Aaron R. Wheeler,
Danail Stoyanov,
Michael Shaw
Abstract:
Optoelectronic tweezer-driven microrobots (OETdMs) are a versatile micromanipulation technology based on the use of light induced dielectrophoresis to move small dielectric structures (microrobots) across a photoconductive substrate. The microrobots in turn can be used to exert forces on secondary objects and carry out a wide range of micromanipulation operations, including collecting, transportin…
▽ More
Optoelectronic tweezer-driven microrobots (OETdMs) are a versatile micromanipulation technology based on the use of light induced dielectrophoresis to move small dielectric structures (microrobots) across a photoconductive substrate. The microrobots in turn can be used to exert forces on secondary objects and carry out a wide range of micromanipulation operations, including collecting, transporting and depositing microscopic cargos. In contrast to alternative (direct) micromanipulation techniques, OETdMs are relatively gentle, making them particularly well suited to interacting with sensitive objects such as biological cells. However, at present such systems are used exclusively under manual control by a human operator. This limits the capacity for simultaneous control of multiple microrobots, reducing both experimental throughput and the possibility of cooperative multi-robot operations. In this article, we describe an approach to automated targeting and path planning to enable open-loop control of multiple microrobots. We demonstrate the performance of the method in practice, using microrobots to simultaneously collect, transport and deposit silica microspheres. Using computational simulations based on real microscopic image data, we investigate the capacity of microrobots to collect target cells from within a dissociated tissue culture. Our results indicate the feasibility of using OETdMs to autonomously carry out micromanipulation tasks within complex, unstructured environments.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Enhanced displacement of phase separating liquid mixtures in 2D confined spaces
Authors:
Gilmar F. Arends,
Jae Bem You,
John M. Shaw,
Xuehua Zhang
Abstract:
Displacing liquid in a confined space is important for technological processes, ranging from porous membrane separation to CO$_{2}$ sequestration. The liquid to be displaced usually consists of multiple components with different solubilities in the displacing liquid. Phase separation and chemical composition gradients in the liquids can influence the displacement rate. In this work, we investigate…
▽ More
Displacing liquid in a confined space is important for technological processes, ranging from porous membrane separation to CO$_{2}$ sequestration. The liquid to be displaced usually consists of multiple components with different solubilities in the displacing liquid. Phase separation and chemical composition gradients in the liquids can influence the displacement rate. In this work, we investigate the effects of liquid composition on the displacement process of ternary liquid mixtures in a quasi-2D microchannel where liquid-liquid phase separation occurs concurrently. We focused on model ternary mixtures containing 1-octanol, ethanol, and water. These mixtures are displaced with water or with ethanol aqueous solution. The spatial distribution of subphases arising from phase separation and the displacement rates of the solution are impacted by the initial ternary solution composition. The boundary between the solution and displacing liquid changes from a defined interface to a diffusive interface as the initial 1-octanol composition in the solution is reduced. The displacement rate also varies non-linearly with the initial 1-octanol composition. The slowest displacement rate arises in the intermediate 1-octanol concentration, where a stable three-zone configuration forms at the boundary. At very low 1-octanol concentration, the displacement rate is fast, associated with droplet formation and motion driven by the chemical concentration gradients formed during phase separation. The excessive energy provided from phase separation may contribute to the enhanced displacement at intermediate to high 1-octanol concentrations, but not at the low 1-octanol concentration with enhancement from induced flow in confinement. The knowledge gained from this study highlights the importance of manipulating phase separation to enhance mass transport in confinement for a wide range of separation processes.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Strong coupling of Fe-Co alloy with ultralow damping to superconducting co-planar waveguide resonators
Authors:
I. W. Haygood,
M. R. Pufall,
E. R. J. Edwards,
Justin M. Shaw,
W. H. Rippard
Abstract:
We report on the strong coupling between a metallic ferromagnetic Fe75Co25 thin film patterned element and a range of superconducting Nb half-wavelength co-planar waveguide (CPW) resonators. By varying the volume of the ferromagnet we demonstrate that the coupling rate scales linearly with the square root of the number of spins and achieve a coupling rate over 700 MHz, approaching the ultrastrong…
▽ More
We report on the strong coupling between a metallic ferromagnetic Fe75Co25 thin film patterned element and a range of superconducting Nb half-wavelength co-planar waveguide (CPW) resonators. By varying the volume of the ferromagnet we demonstrate that the coupling rate scales linearly with the square root of the number of spins and achieve a coupling rate over 700 MHz, approaching the ultrastrong coupling regime. Experiments varying the center conductor width while maintaining constant magnetic volume verify that decreasing the center conductor width increases coupling and cooperativity. Our results show that the frequency dependence of the coupling rate is linear with the fundamental and higher order odd harmonics of the CPW, but with differing efficiencies. The results show promise for scaling planar superconducting resonator/magnetic hybrid systems to smaller dimensions.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.