Showing 1–50 of 78 results for author: Sarra, I

Characterization of the PADME positron beam for the X17 measurement

Authors: S. Bertelli, F. Bossi, B. Buonomo, R. De Sangro, C. Di Giulio, E. Di Meco, K. Dimitrova, D. Domenici, F. Ferrarotto, G. Finocchiaro, L. G. Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, P. Gianotti, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Mancini, G. C. Organtini, M. Raggi, I. Sarra, R. Simeonov , et al. (5 additional authors not shown)

Abstract: This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity… ▽ More This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity through a combination of data analysis and Monte Carlo simulations. The results achieved include an absolute precision in the momentum of the beam to within $\sim$ 1-2 MeV$/c$, a relative beam energy spread below 0.25\%, and an absolute precision in the intensity of the beam at the level of 2\% percent. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The Mu2e crystal and SiPM calorimeter: construction status

Authors: Nikolay Atanov, Vladimir Baranov, Leo Borrel, Caterina Bloise, Julian Budagov, Sergio Ceravol, Franco Cervelli, Francesco Colao, Marco Cordelli, Giovanni Corradi, Yuri Davydov, Stefano Di Falco, Eleonora Diociaiuti, Simone Donati, Bertrand Echenard, Carlo Ferrari, Ruben Gargiulo, Antonio Gioiosa, Simona Giovannella, Valerio Giusti, Vladimir Glagolev, Francesco Grancagnolo, Dariush Hampai, Fabio Happacher, David Hitlin , et al. (15 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilitie… ▽ More The Mu2e experiment at Fermilab searches for the neutrino-less conversion of a negative muon into an electron, with a distinctive signature of a mono-energetic electron with energy of 104.967 MeV. The calorimeter is made of two disks of pure CsI crystals, each read out by two custom large area UV-extended SiPMs. It plays a fundamental role in providing excellent particle identification capabilities and an online trigger filter while improving the track reconstruction, requiring better than 10% energy and 500 ps timing resolutions for 100 MeV electrons. In this paper, we present the status of construction and the Quality Control (QC) performed on the produced crystals and photosensors, the development of the rad-hard electronics, and the most important results of the irradiation tests. Construction of the mechanics is also reported. Status and plans for the calorimeter assembly and its first commissioning are described. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 70, NO. 7, 2023

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

True muonium resonant production at $e^+e^-$ colliders with standard crossing angle

Authors: Ruben Gargiulo, Elisa Di Meco, Daniele Paesani, Stefano Palmisano, Eleonora Diociaiuti, Ivano Sarra

Abstract: True muonium ($μ^+μ^-$) is the heaviest and smallest bound state not involving quantum chromodynamics, after true tauonium ($τ^+τ^-$) and mu-tauonium ($μ^\pmτ^\mp$). Unlike atoms containing $τ$ particles, the muon lifetime is long enough to allow observation of true muonium (TM) decays and transitions. One of the proposed methods to observe the spin 1 fundamental state of TM, which has the smalles… ▽ More True muonium ($μ^+μ^-$) is the heaviest and smallest bound state not involving quantum chromodynamics, after true tauonium ($τ^+τ^-$) and mu-tauonium ($μ^\pmτ^\mp$). Unlike atoms containing $τ$ particles, the muon lifetime is long enough to allow observation of true muonium (TM) decays and transitions. One of the proposed methods to observe the spin 1 fundamental state of TM, which has the smallest lifetime among TM spin 1 states, was to build an $e^+e^-$ collider with a large crossing angle ($θ\sim 30^\circ$) in order to provide TM with a large boost and detect its decay vertex in $e^+ e^-$. The following paper will instead show that TM excited states ($n\geq2$) can be observed in relatively large quantities ($\mathcal{O}$(10)/month) at a feasible $e^+e^-$ collider with standard crossing angles, after setting their center-of-mass energy to the TM mass ($\sim2m_μ=211.4$ MeV). △ Less

Submitted 26 January, 2024; v1 submitted 20 September, 2023; originally announced September 2023.

Workshop on a future muon program at FNAL

Authors: S. Corrodi, Y. Oksuzian, A. Edmonds, J. Miller, H. N. Tran, R. Bonventre, D. N. Brown, F. Meot, V. Singh, Y. Kolomensky, S. Tripathy, L. Borrel, M. Bub, B. Echenard, D. G. Hitlin, H. Jafree, S. Middleton, R. Plestid, F. C. Porter, R. Y. Zhu, L. Bottura, E. Pinsard, A. M. Teixeira, C. Carelli, D. Ambrose , et al. (68 additional authors not shown)

Abstract: The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e… ▽ More The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 68 pages, 36 figures

Report number: FERMILAB-CONF-23-464-PPD, CALT-TH-2023-036

Beam test, simulation, and performance evaluation of PbF$_2$ and PWO-UF crystals with SiPM readout for a semi-homogeneous calorimeter prototype with longitudinal segmentation

Authors: C. Cantone, S. Carsi, S. Ceravolo, E. Di Meco, E. Diociaiuti, I. Frank, S. Kholodenko, S. Martellotti, M. Mirra, P. Monti-Guarnieri, M. Moulson, D. Paesani, M. Prest, M. Romagnoni, I. Sarra, F. Sgarbossa, M. Soldani, E. Vallazza

Abstract: Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin develop… ▽ More Crilin (Crystal Calorimeter with Longitudinal Information) is a semi-homogeneous, longitudinally segmented electromagnetic calorimeter based on high-$Z$, ultra-fast crystals with UV-extended SiPM readout. The Crilin design has been proposed as a candidate solution for both a future Muon Collider barrel ECAL and for the Small Angle Calorimeter of the HIKE experiment. As a part of the Crilin development program, we have carried out beam tests of small ($10\times10\times40$~mm$^3$) lead fluoride (PbF$_2$) and ultra-fast lead tungstate (PbWO$_4$, PWO) crystals with 120~GeV electrons at the CERN SPS to study the light yield, timing response, and systematics of light collection with a proposed readout scheme. For a single crystal of PbF$_2$, corresponding to a single Crilin cell, a time resolution of better than 25~ps is obtained for $>$3 GeV of deposited energy. For a single cell of \pwo, a time resolution of better than 45~ps is obtained for the same range of deposited energy. This timing performance fully satisfies the design requirements for the Muon Collider and HIKE experiments. Further optimizations of the readout scheme and crystal surface preparation are expected to bring further improvements. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Status and Prospects of PADME

Authors: Susanna Bertelli, Fabio Bossi, Riccardo De Sangro, Claudio Di Giulio, Elisa Di Meco, Danilo Domenici, Giuseppe Finocchiaro, Luca Gennaro Foggetta, Marco Garattini, Andrea Ghigo, Paola Gianotti, Marco Mancini, Ivano Sarra, Tommaso Spadaro, Eleuterio Spiriti, Clara Taruggi, Elisabetta Vilucchi, Venelin Kozhuharov, Kalina Dimitrova, Simeon Ivanov, Svetoslav Ivanov, Radoslav Simeonov, Georgi Georgiev, Fabio Ferrarotto, Emanuele Leonardi , et al. (6 additional authors not shown)

Abstract: The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI insti… ▽ More The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI institute, the PADME detector has been modified and a new data-taking run has been undertaken to probe the existance of the so-called ``X17" particle △ Less

Submitted 15 May, 2023; originally announced May 2023.

Comments: 6 pages, 12 figures, proceedings from Moriond EW 2023

Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, P. Amedo, J. Anderson, D. A. Andrade , et al. (1294 additional authors not shown)

Abstract: A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics… ▽ More A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $σ(E_ν)$ for charged-current $ν_e$ absorption on argon. In the context of a simulated extraction of supernova $ν_e$ spectral parameters from a toy analysis, we investigate the impact of $σ(E_ν)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $σ(E_ν)$ must be substantially reduced before the $ν_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $σ(E_ν)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $σ(E_ν)$. A direct measurement of low-energy $ν_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level. △ Less

Submitted 7 July, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: 25 pages, 21 figures

Report number: FERMILAB-PUB-23-132-CSAID-LBNF-ND-T

Journal ref: Phys. Rev. D 107, 112012 (2023)

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aimè, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

HIKE, High Intensity Kaon Experiments at the CERN SPS

Authors: E. Cortina Gil, J. Jerhot, N. Lurkin, T. Numao, B. Velghe, V. W. S. Wong, D. Bryman, L. Bician, Z. Hives, T. Husek, K. Kampf, M. Koval, A. T. Akmete, R. Aliberti, V. Büscher, L. Di Lella, N. Doble, L. Peruzzo, M. Schott, H. Wahl, R. Wanke, B. Döbrich, L. Montalto, D. Rinaldi, F. Dettori , et al. (154 additional authors not shown)

Abstract: A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the St… ▽ More A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: Letter of Intent submitted to CERN SPSC. Address all correspondence to hike-eb@cern.ch

Report number: CERN-SPSC-2022-031/SPSC-I-257

Cross-section measurement of two-photon annihilation in-flight of positrons at $\sqrt{s}=20$ MeV with the PADME detector

Authors: F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, A. P. Caricato, G. Chiodini, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, F. Giacchino, P. Gianotti, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Martino, I. Oceano, F. Oliva , et al. (13 additional authors not shown)

Abstract: The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection… ▽ More The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection of the photon pair and one of the most precise for positron energies below 1 GeV. This measurement represents a necessary step to search for dark sector particles and mediators weakly coupled to photons and/or electrons with masses ranging from 1 MeV to 20 MeV with PADME. The measurement agrees with the Next to Leading Order QED prediction within the overall 6% uncertainty. △ Less

Submitted 7 November, 2022; v1 submitted 26 October, 2022; originally announced October 2022.

Comments: Submitted to PRD

An automated QC Station for the Calibration of the Mu2e Calorimeter Readout Units

Authors: E. Sanzani, C. Bloise, S. Ceravolo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, S. Di Falco, E. Diociaiuti, S. Donati, C. Ferrari, R. Gargiulo, A. Gioiosa, S. Giovannella, V. Giusti, D. Hampai, F. Happacher, M. Martini, S. Miscetti, L. Morescalchi, D. Paesani, D. Pasciuto, E. Pedreschi, F. Raffaelli, I. Sarra , et al. (3 additional authors not shown)

Abstract: The Mu2e calorimeter will employ Readout Units, each made of two Silicon Photomultipliers arrays and two Front End Electronics boards. To calibrate them, we have designed, assembled and put in operation an automated Quality Control (QC) station. Gain, collected charge and photon detection efficiency are evaluated for each unit. In this paper, the QC Station is presented, in its hardware and softwa… ▽ More The Mu2e calorimeter will employ Readout Units, each made of two Silicon Photomultipliers arrays and two Front End Electronics boards. To calibrate them, we have designed, assembled and put in operation an automated Quality Control (QC) station. Gain, collected charge and photon detection efficiency are evaluated for each unit. In this paper, the QC Station is presented, in its hardware and software aspects, summarizing also the tests performed on the ROUs and the first measurement results. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: To appear on NIM

Crilin: A CRystal calorImeter with Longitudinal InformatioN for a future Muon Collider

Authors: S. Ceravolo, F. Colao, C. Curatolo, E. Di Meco, E. Diociaiuti, D. Lucchesi, D. Paesani, N. Pastrone, A. Saputi, I. Sarra, L. Sestini, D. Tagnani

Abstract: The measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy jets. In a future Muon Collider, the beam-induced backgrounds (BIB) represent the main challenge in the design of the detectors and of the event reconstruction algorithms. The technology and the design of the calorimeter… ▽ More The measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy jets. In a future Muon Collider, the beam-induced backgrounds (BIB) represent the main challenge in the design of the detectors and of the event reconstruction algorithms. The technology and the design of the calorimeters should be chosen to reduce the effect of the BIB, while keeping good physics performance. Several requirements can be inferred: i) high granularity to reduce the overlap of BIB particles in the same calorimeter cell; ii) excellent timing (of the order of 100 ps) to reduce the out-of-time component of the BIB; iii) longitudinal segmentation to distinguish the signal showers from the fake showers produced by the BIB; iv) good energy resolution (less than 10%/sqrt(E)) to obtain good physics performance, as has been already demonstrated for conceptual particle flow calorimeters. Our proposal consists of a semi-homogeneous electromagnetic calorimeter based on Lead Fluoride Crystals (PbF2) readout by surface-mount UV-extended Silicon Photomultipliers (SiPMs): the Crilin calorimeter. In this paper, the performances of the Crilin calorimeter in the Muon Collider framework for hadron jets reconstruction have been analyzed. We report the single components characterizations together with the development of a small-scale prototype, consisting of 2 layers of 3x3 crystals each. △ Less

Submitted 7 September, 2022; v1 submitted 12 June, 2022; originally announced June 2022.

Commissioning of the PADME experiment with a positron beam

Authors: P. Albicocco, R. Assiro, F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, E. Capitolo, C. Capoccia, A. P. Caricato, S. Ceravolo, G. Chiodini, G. Corradi, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, S. Fiore, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, F. Giacchino, A. Ghigo, P. Gianotti , et al. (31 additional authors not shown)

Abstract: The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ posi… ▽ More The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ positrons-on-target. This paper presents the PADME detector status after commissioning in July 2019. In addition, the software algorithms employed to reconstruct physics objects, such as photons and charged particles, and the calibration procedures adopted are illustrated in detail. The results show that the experimental apparatus reaches the design performance, and is able to identify and measure standard electromagnetic processes, such as positron Bremsstrahlung, electron-positron annihilation into two photons. △ Less

Submitted 20 July, 2022; v1 submitted 6 May, 2022; originally announced May 2022.

Comments: submitted to JINST

The PADME beam line Monte Carlo simulation

Authors: F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, A. P. Caricato, G. Chiodini, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, S. Fiore, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, A. Ghigo, P. Gianotti, F. Iazzi, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Martino , et al. (16 additional authors not shown)

Abstract: The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) of the INFN Laboratory of Frascati is designed to search for invisible decays of dark sector particles produced in electron-positron annihilation events with a positron beam and a thin fixed target, by measuring the missing mass of single-photon final states. The presence of backgrounds originating from beam halo particles can significan… ▽ More The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) of the INFN Laboratory of Frascati is designed to search for invisible decays of dark sector particles produced in electron-positron annihilation events with a positron beam and a thin fixed target, by measuring the missing mass of single-photon final states. The presence of backgrounds originating from beam halo particles can significantly reduce the sensitivity of the experiment. To thoroughly understand the origin of the beam background contribution, a detailed Geant4-based Monte Carlo simulation has been developed, containing a full description of the detector together with the beam line and its optical elements. This simulation allows the full interactions of each particle to be described, both during beam line transport and during detection, a possibility which represents an innovative way to obtain reliable background predictions △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 14 pages 10 figures

A New Charged Lepton Flavor Violation Program at Fermilab

Authors: M. Aoki, R. B. Appleby, M. Aslaninejad, R. Barlow, R. H. Bernstein, C. Bloise, L. Calibbi, F. Cervelli, R. Culbertson, Andre Luiz de Gouvea, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, A. Gaponenko, S. Giovannella, C. Group, F. Happacher, M. T. Hedges, D. G. Hitlin, E. Hungerford, C. Johnstone, D. M. Kaplan, M. Kargiantoulakis , et al. (43 additional authors not shown)

Abstract: The muon has played a central role in establishing the Standard Model of particle physics, and continues to provide valuable information about the nature of new physics. A new complex at Fermilab, the Advanced Muon Facility, would provide the world's most intense positive and negative muon beams by exploiting the full potential of PIP-II and the Booster upgrade. This facility would enable a broad… ▽ More The muon has played a central role in establishing the Standard Model of particle physics, and continues to provide valuable information about the nature of new physics. A new complex at Fermilab, the Advanced Muon Facility, would provide the world's most intense positive and negative muon beams by exploiting the full potential of PIP-II and the Booster upgrade. This facility would enable a broad muon physics program, including studies of charged lepton flavor violation, muonium-antimuonium transitions, a storage ring muon EDM experiment, and muon spin rotation experiments. This document describes a staged realization of this complex, together with a series of next-generation experiments to search for charged lepton flavor violation. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: A Contributed Paper for Snowmass 2021

Simulated Detector Performance at the Muon Collider

Authors: Nazar Bartosik, Karol Krizka, Simone Pagan Griso, Chiara Aimè, Aram Apyan, Mohammed Attia Mahmoud, Alessandro Bertolin, Alessandro Braghieri, Laura Buonincontri, Simone Calzaferri, Massimo Casarsa, Luca Castelli, Maria Gabriella Catanesi, Francesco Giovanni Celiberto, Alessandro Cerri, Grigorios Chachamis, Anna Colaleo, Camilla Curatolo, Giacomo Da Molin, Sridhara Dasu, Dmitri Desinov, Haluk Denizli, Biagio Di Micco, Tommaso Dorigo, Filippo Errico , et al. (46 additional authors not shown)

Abstract: In this paper we report on the current status of studies on the expected performance for a detector designed to operate in a muon collider environment. Beam-induced backgrounds (BIB) represent the main challenge in the design of the detector and the event reconstruction algorithms. The current detector design aims to show that satisfactory performance can be achieved, while further optimizations a… ▽ More In this paper we report on the current status of studies on the expected performance for a detector designed to operate in a muon collider environment. Beam-induced backgrounds (BIB) represent the main challenge in the design of the detector and the event reconstruction algorithms. The current detector design aims to show that satisfactory performance can be achieved, while further optimizations are expected to significantly improve the overall performance. We present the characterization of the expected beam-induced background, describe the detector design and software used for detailed event simulations taking into account BIB effects. The expected performance of charged-particle reconstruction, jets, electrons, photons and muons is discussed, including an initial study on heavy-flavor jet tagging. A simple method to measure the delivered luminosity is also described. Overall, the proposed design and reconstruction algorithms can successfully reconstruct the high transverse-momentum objects needed to carry out a broad physics program. △ Less

Submitted 12 August, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Mu2e-II: Muon to electron conversion with PIP-II

Authors: K. Byrum, S. Corrodi, Y. Oksuzian, P. Winter, L. Xia, A. W. J. Edmonds, J. P. Miller, J. Mott, W. J. Marciano, R. Szafron, R. Bonventre, D. N. Brown, Yu. G. Kolomensky, O. Ning, V. Singh, E. Prebys, L. Borrel, B. Echenard, D. G. Hitlin, C. Hu, D. X. Lin, S. Middleton, F. C. Porter, L. Zhang, R. -Y. Zhu , et al. (83 additional authors not shown)

Abstract: An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for exa… ▽ More An observation of Charged Lepton Flavor Violation (CLFV) would be unambiguous evidence for physics beyond the Standard Model. The Mu2e and COMET experiments, under construction, are designed to push the sensitivity to CLFV in the mu to e conversion process to unprecedented levels. Whether conversion is observed or not, there is a strong case to be made for further improving sensitivity, or for examining the process on additional target materials. Mu2e-II is a proposed upgrade to Mu2e, with at least an additional order of magnitude in sensitivity to the conversion rate over Mu2e. The approach and challenges for this proposal are summarized. Mu2e-II may be regarded as the next logical step in a continued high-intensity muon program at FNAL. △ Less

Submitted 16 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 46 pages 43 figures 7 tables

Report number: 20220310: [CONF-22-123]

The physics case of a 3 TeV muon collider stage

Authors: Jorge De Blas, Dario Buttazzo, Rodolfo Capdevilla, David Curtin, Roberto Franceschini, Fabio Maltoni, Patrick Meade, Federico Meloni, Shufang Su, Eleni Vryonidou, Andrea Wulzer, Chiara Aimè, Aram Apyan, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, Nazar Bartosik, Alessandro Bertolin, Salvatore Bottaro, Laura Buonincontri, Massimo Casarsa, Luca Castelli, Maria Gabriella Catanesi, Francesco Giovanni Celiberto, Alessandro Cerri , et al. (109 additional authors not shown)

Abstract: In the path towards a muon collider with center of mass energy of 10 TeV or more, a stage at 3 TeV emerges as an appealing option. Reviewing the physics potential of such muon collider is the main purpose of this document. In order to outline the progression of the physics performances across the stages, a few sensitivity projections for higher energy are also presented. There are many opportuniti… ▽ More In the path towards a muon collider with center of mass energy of 10 TeV or more, a stage at 3 TeV emerges as an appealing option. Reviewing the physics potential of such muon collider is the main purpose of this document. In order to outline the progression of the physics performances across the stages, a few sensitivity projections for higher energy are also presented. There are many opportunities for probing new physics at a 3 TeV muon collider. Some of them are in common with the extensively documented physics case of the CLIC 3 TeV energy stage, and include measuring the Higgs trilinear coupling and testing the possible composite nature of the Higgs boson and of the top quark at the 20 TeV scale. Other opportunities are unique of a 3 TeV muon collider, and stem from the fact that muons are collided rather than electrons. This is exemplified by studying the potential to explore the microscopic origin of the current $g$-2 and $B$-physics anomalies, which are both related with muons. △ Less

Submitted 27 May, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 73 pages, 28 figures; Contribution to Snowmass 2021

A Measurement of Proton, Deuteron, Triton and Alpha Particle Emission after Nuclear Muon Capture on Al, Si and Ti with the AlCap Experiment

Authors: AlCap Collaboration, Andrew Edmonds, John Quirk, Ming-Liang Wong, Damien Alexander, Robert H. Bernstein, Aji Daniel, Eleonora Diociaiuti, Raffaella Donghia, Ewen L. Gillies, Ed V. Hungerford, Peter Kammel, Benjamin E. Krikler, Yoshitaka Kuno, Mark Lancaster, R. Phillip Litchfield, James P. Miller, Anthony Palladino, Jose Repond, Akira Sato, Ivano Sarra, Stefano Roberto Soleti, Vladimir Tishchenko, Nam H. Tran, Yoshi Uchida , et al. (2 additional authors not shown)

Abstract: Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture o… ▽ More Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. The AlCap experiment measured the yield and energy spectra of protons, deuterons, tritons, and alpha particles emitted after the nuclear capture of muons stopped in Al, Si, and Ti in the low energy range relevant for the muon-to-electron conversion experiments. Individual charged particle types were identified in layered silicon detector packages and their initial energy distributions were unfolded from the observed energy spectra. Detailed information on yields and energy spectra for all observed nuclei are presented in the paper. △ Less

Submitted 1 April, 2022; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: 24 pages, 19 figures

Radiation study of Lead Fluoride crystals

Authors: A. Cemmi, A. Colangeli, B. D'orsi, I. Di Sarcina, E. Diociaiuti, S. Fiore, D. Paesani, M. Pillon, A. Saputi, I. Sarra, D. Tagnani

Abstract: Lead fluoride (PbF$_2$) crystals represent an excellent and relatively innovative choice for high resolution electromagnetic calorimeters with high granularity and fast timing for high intensity environments. For this reason two PbF$_2$ crystals, sized $5\times 5 \times 40 $ mm$^3$, were irradiated with $^{60}$Co photons up to $\sim 4$ Mrad and with 14 MeV neutrons up to a $10^{13}$ n/cm$^2$ total… ▽ More Lead fluoride (PbF$_2$) crystals represent an excellent and relatively innovative choice for high resolution electromagnetic calorimeters with high granularity and fast timing for high intensity environments. For this reason two PbF$_2$ crystals, sized $5\times 5 \times 40 $ mm$^3$, were irradiated with $^{60}$Co photons up to $\sim 4$ Mrad and with 14 MeV neutrons up to a $10^{13}$ n/cm$^2$ total fluence. Their loss in transmittance was evaluated at different steps of the photon and neutron irradiation campaign, resulting in a total of 30% loss above 350 nm. With crystals always kept in dark conditions, natural and thermal annealing, as well as optical bleaching with 400 nm light, were performed on the irradiated specimens, resulting in a partial recovery of their original optical characteristics. △ Less

Submitted 14 April, 2022; v1 submitted 26 July, 2021; originally announced July 2021.

Characterisation and performance of the PADME electromagnetic calorimeter

Authors: P. Albicocco, J. Alexander, F. Bossi, P. Branchini, B. Buonomo, C. Capoccia, E. Capitolo, G. Chiodini, A. P. Caricato, R. de Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, G. Finocchiaro, S. Fiore, L. G. Foggetta, A. Frankenthal, G. Georgiev, A. Ghigo, F. Giacchino, P. Gianotti, S. Ivanov, V. Kozhuharov, E. Leonardi, B. Liberti , et al. (20 additional authors not shown)

Abstract: The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring t… ▽ More The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring the energy and position of the final-state $γ$. The missing four-momentum carried away by the $A'$ can be evaluated from this information and the particle mass inferred. This paper presents the design, construction, and calibration of the PADME's electromagnetic calorimeter. The results achieved in terms of equalisation, detection efficiency and energy resolution during the first phase of the experiment demonstrate the effectiveness of the various tools used to improve the calorimeter performance with respect to earlier prototypes. △ Less

Submitted 21 October, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 15 pages, 15 figures

Mu2e calorimeter readout system

Authors: N. Atanov, V. Baranov, L. Baldini, J. Budagov, D. Caiulo, F. Cei, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, F. D'Errico, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Faetti, S. Giovannella, S. Giudici, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, L. Lazzeri , et al. (21 additional authors not shown)

Abstract: The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to o… ▽ More The Mu2e electromagnetic calorimeter is made of two disks of un-doped parallelepiped CsI crystals readout by SiPM. There are 674 crystals in one disk and each crystal is readout by an array of two SiPM. The readout electronics is composed of two types of modules: 1) the front-end module hosts the shaping amplifier and the high voltage linear regulator; since one front-end module is interfaced to one SiPM, a total of 2696 modules are needed for the entire calorimeter; 2) a waveform digitizer provides a further level of amplification and digitizes the SiPM signal at the sampling frequency of $200\ \text{M}\text{Hz}$ with 12-bits ADC resolution; since one board digitizes the data received from 20 SiPMs, a total of 136 boards are needed. The readout system operational conditions are hostile: ionization dose of $20\ \text{krads}$, neutron flux of $10^{12}\ \mathrm{n}(1\ \text{MeVeq})/\text{cm}^2$, magnetic field of $1\ \text{T}$ and in vacuum level of $10^{-4}\ \text{Torr}$. A description of the readout system and qualification tests is reported. △ Less

Submitted 9 July, 2019; originally announced July 2019.

Journal ref: Nuclear Inst. and Methods in Physics Research, A, 2019

The Mu2e calorimeter: quality assurance of production crystals and SiPMs

Authors: N. Atanov, V. Baranov, J. Budagov, D. Caiulo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi , et al. (12 additional authors not shown)

Abstract: The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples pre… ▽ More The Mu2e calorimeter is composed of two disks each containing 1348 pure CsI crystals, each crystal read out by two arrays of 6x6 mm2 monolithic SiPMs. The experimental requirements have been translated in a series of technical specifications for both crystals and SiPMs. Quality assurance tests, on first crystal and then SiPM production batches, confirm the performances of preproduction samples previously assembled in a calorimeter prototype and tested with an electron beam. The production yield is sufficient to allow the construction of a calorimeter of the required quality in the expected times. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 2 pages, 2 figures, 14th meeting on Advanced Detectors

Characterization and Performance of PADME's Cherenkov-Based Small-Angle Calorimeter

Authors: A. Frankenthal, J. Alexander, B. Buonomo, E. Capitolo, C. Capoccia, C. Cesarotti, R. De Sangro, C. Di Giulio, F. Ferrarotto, L. Foggetta, G. Georgiev, P. Gianotti, M. Hunyadi, V. Kozhuharov, A. Krasznahorkay, E. Leonardi, G. Organtini, G. Piperno, M. Raggi, C. Rella, A. Saputi, I. Sarra, E. Spiriti, C. Taruggi, P. Valente

Abstract: The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter,… ▽ More The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter, a component of PADME's detector dedicated to rejecting 2- and 3-gamma backgrounds. The crucial requirement is a timing resolution of less than 200 ps, which is satisfied by the choice of PbF$_2$ crystals and the newly released Hamamatsu R13478UV photomultiplier tubes (PMTs). We find a timing resolution of 81 ps (with double-peak separation resolution of 1.8 ns) and a single-crystal energy resolution of 5.7%/$\sqrt{E}$ with light yield of 2.07 photo-electrons per MeV, using 100 to 400 MeV electrons at the Beam Test Facility of LNF. We also propose the investigation of a two-PMT solution coupled to a single PbF$_2$ crystal for higher-energy applications, which has potentially attractive features. △ Less

Submitted 22 February, 2019; v1 submitted 27 September, 2018; originally announced September 2018.

Comments: 12 pages, 19 figures. v2: added section on radiation damage studies

Journal ref: Nucl. Instrum. Methods Phys. Res. A 919 (2019) 89-97

An induced annealing technique for SiPMs neutron radiation damage

Authors: M. Cordelli, E. Diociaiuti, A. Ferrari, S. Miscetti, S. Muller, G. Pezzullo, I. Sarra

Abstract: The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that… ▽ More The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that provides a partial recovery of the neutron damage on SiPMs by means of an Electrical Induced Annealing. Tests were performed, at the temperature of 20C, on a sample of three SiPM arrays (2x3) of 6 mm^2 cells with 50 um pixel sizes: two from Hamamatsu and one from SensL. These SiPMs have been exposed to neutrons generated by the Elbe Positron Source facility (Dresden), up to a total fluence of 8x10^11 n1MeV-eq/cm^2. Our techniques allowed to reduced the leakage current of a factor ranging between 15-20 depending on the overbias used and the SiPM vendor. Because, during the process the SiPM current can reach O(100 mA), the sensors need to be operated in a condition that provides thermal dissipation. Indeed, caution must be used when applying this kind of procedures on the SiPMs, because it may damage permanently the device itself. △ Less

Submitted 6 December, 2021; v1 submitted 25 April, 2018; originally announced April 2018.

Quality Assurance on Un-Doped CsI Crystals for the Mu2e Experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceram… ▽ More The Mu2e experiment is constructing a calorimeter consisting of 1,348 undoped CsI crystals in two disks. Each crystal has a dimension of 34 x 34 x 200 mm, and is readout by a large area silicon PMT array. A series of technical specifications was defined according to physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain and Shanghai Institute of Ceramics. We report the quality assurance on crystal's scintillation properties and their radiation hardness against ionization dose and neutrons. With a fast decay time of 30 ns and a light output of more than 100 p.e./MeV measured with a bi-alkali PMT, undoped CsI crystals provide a cost-effective solution for the Mu2e experiment. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 7 pages, 16 figures, published in IEEE TNS NS (2018)

Journal ref: IEEE TRANSACTIONS ON NUCLEAR SCIENCE, VOL. 65, NO. 2, FEBRUARY 2018

Design and status of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous ex… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavour violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive signature of a mono-energetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electro- magnetic calorimeter and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1 T axial magnetic field and in an harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100 MeV electrons and reach at these energies: (a) a time resolution better than 0.5 ns; (b) an energy resolution < 10% and (c) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674 undoped CsI crystals read by two large area arrays of UV-extended SiPMs. We report here the construction and test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: 8 pages, 16 figures, submitted to IEEE

The Mu2e Calorimeter Final Technical Design Report

Authors: N. Atanov, V. Baranov, J. Budagov, S. Ceravolo, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane, Y. Davydov, S. Di Falco, S. Donati, E. Diociaiuti, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi , et al. (15 additional authors not shown)

Abstract: Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout… ▽ More Since the first version of the Mu2e TDR released at the beginning of 2015, the Mu2e Calorimeter system has undergone a long list of changes to arrive to its final design. These changes were primarily caused by two reasons: (i) the technology choice between the TDR proposed solution of BaF2 crystals readout with solar blind Avalanche Photodiodes (APDs) and the backup option of CsI crystals readout with Silicon Photomultipliers (SiPM) has been completed and (ii) the channels numbering, the mechanical system and the readout electronics were substantially modified while proceeding with engineering towards the final project. This document updates the description of the calorimeter system adding the most recent engineering drawings and tecnical progresses. △ Less

Submitted 18 February, 2018; originally announced February 2018.

Comments: TDR

Expression of Interest for Evolution of the Mu2e Experiment

Authors: F. Abusalma, D. Ambrose, A. Artikov, R. Bernstein, G. C. Blazey, C. Bloise, S. Boi, T. Bolton, J. Bono, R. Bonventre, D. Bowring, D. Brown, D. Brown, K. Byrum, M. Campbell, J. -F. Caron, F. Cervelli, D. Chokheli, K. Ciampa, R. Ciolini, R. Coleman, D. Cronin-Hennessy, R. Culbertson, M. A. Cummings, A. Daniel , et al. (103 additional authors not shown)

Abstract: We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the fores… ▽ More We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the foreseeable future. Mu2e-II will use as much of the Mu2e infrastructure as possible, providing, where required, improvements to the Mu2e apparatus to accommodate the increased beam intensity and cope with the accompanying increase in backgrounds. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: 17 pages, 4 figures, 1 table; Submitted to the Fermilab Physics Advisory Committee

Report number: Fermilab-FN-1052

The Mu2e crystal calorimeter

Authors: N. Atanov, J. Budagov, F. Cervelli, F. Colao, Y Davidov, S. Di Falco, E. Diociaiuti, S. Donati, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi, G. Pezzullo, F. Porter, A. Saputi, I. Sarra, F. Spinella, G. Tassielli

Abstract: The Mu2e Experiment at Fermilab will search for coherent, neutrino-less conversion of negative muons into electrons in the field of an Aluminum nucleus, $μ^- + Al \to e^- +Al$. Data collection start is planned for the end of 2021. The dynamics of such charged lepton flavour violating (CLFV) process is well modelled by a two-body decay, resulting in a mono-energetic electron with an energy slight… ▽ More The Mu2e Experiment at Fermilab will search for coherent, neutrino-less conversion of negative muons into electrons in the field of an Aluminum nucleus, $μ^- + Al \to e^- +Al$. Data collection start is planned for the end of 2021. The dynamics of such charged lepton flavour violating (CLFV) process is well modelled by a two-body decay, resulting in a mono-energetic electron with an energy slightly below the muon rest mass. If no events are observed in three years of running, Mu2e will set an upper limit on the ratio between the conversion and the capture rates %\convrate of $\leq 6\ \times\ 10^{-17}$ (@ 90$\%$ C.L.). R$_{μe} = \frac{μ^- + A(Z,N) \to e^- +A(Z,N)}{μ^- + A(Z,N) \to ν_μ ^- +A(Z-1,N)} $ of $\leq 6\ \times\ 10^{-17}$ (@ 90$\%$ C.L.). This will improve the current limit of four order of magnitudes with respect to the previous best experiment. Mu2e complements and extends the current search for $μ\to e γ$ decay at MEG as well as the direct searches for new physics at the LHC. The observation of such CLFV process could be clear evidence for New Physics beyond the Standard Model. Given its sensitivity, Mu2e will be able to probe New Physics at a scale inaccessible to direct searches at either present or planned high energy colliders. To search for the muon conversion process, a very intense pulsed beam of negative muons ($\sim 10^{10} μ/$ sec) is stopped on an Aluminum target inside a very long solenoid where the detector is also located. The Mu2e detector is composed of a straw tube tracker and a CsI crystals electromagnetic calorimeter. An overview of the physics motivations for Mu2e, the current status of the experiment and the required performances and design details of the calorimeter are presented. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: 9 pages

Design, status and perspective of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, E. Diociaiuti, M. Cordelli, G. Corradi, E. Danè, Yu. Davydov, S. Donati, R. Donghia, S. Di Falco, B. Echenard, L. Morescalchi, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μ\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker an… ▽ More The Mu2e experiment at Fermilab will search for the charged lepton flavor violating process of neutrino-less $μ\to e$ coherent conversion in the field of an aluminum nucleus. Mu2e will reach a single event sensitivity of about $2.5\cdot 10^{-17}$ that corresponds to four orders of magnitude improvements with respect to the current best limit. The detector system consists of a straw tube tracker and a crystal calorimeter made of undoped CsI coupled with Silicon Photomultipliers. The calorimeter was designed to be operable in a harsh environment where about 10 krad/year will be delivered in the hottest region and work in presence of 1 T magnetic field. The calorimeter role is to perform $μ$/e separation to suppress cosmic muons mimiking the signal, while providing a high level trigger and a seeding the track search in the tracker. In this paper we present the calorimeter design and the latest R$\&$D results. △ Less

Submitted 18 April, 2018; v1 submitted 9 January, 2018; originally announced January 2018.

Comments: 4 pages, conference proceeding for a presentation held at TIPP'2017. To be published on Springer Proceedings in Physics

The Mu2e undoped CsI crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat, E. Pedreschi, G. Pezzullo , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigg… ▽ More The Mu2e experiment at Fermilab will search for Charged Lepton Flavor Violating conversion of a muon to an electron in an atomic field. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter and an external system, surrounding the solenoid, to veto cosmic rays. The calorimeter plays an important role to provide: a) excellent particle identification capabilities; b) a fast trigger filter; c) an easier tracker track reconstruction. Two disks, located downstream of the tracker, contain 674 pure CsI crystals each. Each crystal is read out by two arrays of UV-extended SiPMs. The choice of the crystals and SiPMs has been finalized after a thorough test campaign. A first small scale prototype consisting of 51 crystals and 102 SiPM arrays has been exposed to an electron beam at the BTF (Beam Test Facility) in Frascati. Although the readout electronics were not the final, results show that the current design is able to meet the timing and energy resolution required by the Mu2e experiment. △ Less

Submitted 22 February, 2018; v1 submitted 7 January, 2018; originally announced January 2018.

Comments: 6 pages, 8 figures, proceedings of the "Calorimetry for the high energy frontier (CHEF17)" conference, 2-6 October 2017, Lyon, France

Report number: FERMILAB-CONF-18-007-E

Journal ref: 2018_JINST_13_C02037

Pre-Production and Quality Assurance of the Mu2e Calorimeter Silicon Photomultipliers

Authors: M. Cordelli, F. Cervelli, E. Diociaiuti, S. Donati, R. Donghia, S. Di Falco, A. Ferrari, S. Giovannella, F. Happacher, M. Martini, L. Morescalchi, S. Miscetti, S. Muller, E. Pedreschi, G. Pezzullo, I. Sarra, F. Spinella

Abstract: The Mu2e electromagnetic calorimeter has to provide precise information on energy, time and position for $\sim$100 MeV electrons. It is composed of 1348 un-doped CsI crystals, each coupled to two large area Silicon Photomultipliers (SiPMs). A modular and custom SiPM layout consisting of a 3$\times$2 array of 6$\times$6 mm$^2$ UV-extended monolithic SiPMs has been developed to fulfill the Mu2e calo… ▽ More The Mu2e electromagnetic calorimeter has to provide precise information on energy, time and position for $\sim$100 MeV electrons. It is composed of 1348 un-doped CsI crystals, each coupled to two large area Silicon Photomultipliers (SiPMs). A modular and custom SiPM layout consisting of a 3$\times$2 array of 6$\times$6 mm$^2$ UV-extended monolithic SiPMs has been developed to fulfill the Mu2e calorimeter requirements and a pre-production of 150 prototypes has been procured by three international firms (Hamamatsu, SensL and Advansid). A detailed quality assurance process has been carried out on this first batch of photosensors: the breakdown voltage, the gain, the quenching time, the dark current and the Photon Detection Efficiency (PDE) have been determined for each monolithic cell of each SiPMs array. One sample for each vendor has been exposed to a neutron fluency up to $\sim$8.5~$\times$~10$^{11}$ 1 MeV (Si) eq. n/cm$^{2}$ and a linear increase of the dark current up to tens of mA has been observed. Others 5 samples for each vendor have undergone an accelerated aging in order to verify a Mean Time To Failure (MTTF) higher than $\sim$10$^{6}$ hours. △ Less

Submitted 13 December, 2017; originally announced December 2017.

Comments: NDIP 2017 - New Developments In Photodetection, 3-7 July 2017, Tours (France)

Quality Assurance on a custom SiPMs array for the Mu2e experiment

Authors: N. Atanov, V. Baranov, J. Budagov, Yu. I. Davydov, V. Glagolev, V. Tereshchenko, Z. Usubov, F. Cervelli, S. Di Falco, S. Donati, L. Morescalchi, E. Pedreschi, G. Pezzullo, F. Raffaelli, F. Spinella, F. Colao, M. Cordelli, G. Corradi, E. Diociaiuti, R. Donghia, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, M. Ricci , et al. (10 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for the coherent $μ\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain… ▽ More The Mu2e experiment at Fermilab will search for the coherent $μ\to e$ conversion on aluminum atoms. The detector system consists of a straw tube tracker and a crystal calorimeter. A pre-production of 150 Silicon Photomultiplier arrays for the Mu2e calorimeter has been procured. A detailed quality assur- ance has been carried out on each SiPM for the determination of its own operation voltage, gain, dark current and PDE. The measurement of the mean-time-to-failure for a small random sample of the pro-production group has been also completed as well as the determination of the dark current increase as a function of the ioninizing and non-ioninizing dose. △ Less

Submitted 20 November, 2017; originally announced November 2017.

Comments: 4 pages, 10 figures, conference proceeding for NSS-MIC 2017

Neutron irradiation test of Hamamatsu, SensL and AdvanSiD UV-extended SiPMs

Authors: M. Cordelli, E. Diociaiuti, R. Donghia, A. Ferrari, S. Miscetti, S. Muller, I. Sarra

Abstract: In this paper, we report the measurement of the neutron radiation hardness of custom Silicon Photomultipliers arrays (SiPMs) manufactured by three companies: Hamamatsu (Japan), AdvanSiD (Italy) and SensL (Ireland). These custom SiPMs consist of a 2 x 3 array of 6 x 6 mm^2 monolithic cells with pixel sizes of respectively 50 um (Hamamatsu and SensL) and 30 um (AdvanSid). A sample from each vendor… ▽ More In this paper, we report the measurement of the neutron radiation hardness of custom Silicon Photomultipliers arrays (SiPMs) manufactured by three companies: Hamamatsu (Japan), AdvanSiD (Italy) and SensL (Ireland). These custom SiPMs consist of a 2 x 3 array of 6 x 6 mm^2 monolithic cells with pixel sizes of respectively 50 um (Hamamatsu and SensL) and 30 um (AdvanSid). A sample from each vendor has been exposed to neutrons generated by the Elbe Positron Source facility (Dresden), up to a total fluence of ~ 8.5 x 10^11 n_(1 MeV)/cm^2. Test results show that the dark current increases almost linearly with the neutron fluence. The room temperature annealing was quantified by measuring the dark current two months after the irradiation test. The dependence of the dark current on the device temperature and on the applied bias have been also evaluated. △ Less

Submitted 15 March, 2018; v1 submitted 17 October, 2017; originally announced October 2017.

Comments: 5 pages, 14 figures

Measurement of the energy and time resolution of a undoped CsI + MPPC array for the Mu2e experiment

Authors: O. Atanova, M. Cordelli, G. Corradi, F. Colao, Yu. I. Davydov, R. Donghia, S. Di Falco, S. Giovannella, F. Happacher, M. Martini, S. Miscetti, L. Morescalchi, P. Murat, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, D. Tagnani, V. Tereshchenko, Z. Usubov

Abstract: This paper describes the measurements of energy and time response and resolution of a 3 x 3 array made of undoped CsI crystals coupled to large area Hamamatsu Multi Pixel Photon Counters. The measurements have been performed using the electron beam of the Beam Test Facility in Frascati (Rome, Italy) in the energy range 80-120 MeV. The measured energy resolution, estimated with the FWHM, at 100 MeV… ▽ More This paper describes the measurements of energy and time response and resolution of a 3 x 3 array made of undoped CsI crystals coupled to large area Hamamatsu Multi Pixel Photon Counters. The measurements have been performed using the electron beam of the Beam Test Facility in Frascati (Rome, Italy) in the energy range 80-120 MeV. The measured energy resolution, estimated with the FWHM, at 100 MeV is 16.4%. This resolution is dominated by the energy leakage due to the small dimensions of the prototype. The time is reconstructed by fitting the leading edge of the digitized signals and applying a digital constant fraction discrimination technique. A time resolution of about 110 ps at 100 MeV is achieved. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Comments: 10 pages, 25 figures

Report number: FERMILAB-TM-2648-E

The calorimeter of the Mu2e experiment at Fermilab

Authors: N. Atanov, V. Baranov, J. Budagov, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dané, Yu. I. Davydov, S. Di Falco, E. Diociaiuti, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (12 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data tak… ▽ More The Mu2e experiment at Fermilab looks for Charged Lepton Flavor Violation (CLFV) improving by 4 orders of magnitude the current experimental sensitivity for the muon to electron conversion in a muonic atom. A positive signal could not be explained in the framework of the current Standard Model of particle interactions and therefore would be a clear indication of new physics. In 3 years of data taking, Mu2e is expected to observe less than one background event mimicking the electron coming from muon conversion. Achieving such a level of background suppression requires a deep knowledge of the experimental apparatus: a straw tube tracker, measuring the electron momentum and time, a cosmic ray veto system rejecting most of cosmic ray background and a pure CsI crystal calorimeter, that will measure time of flight, energy and impact position of the converted electron. The calorimeter has to operate in a harsh radiation environment, in a 10-4 Torr vacuum and inside a 1 T magnetic field. The results of the first qualification tests of the calorimeter components are reported together with the energy and time performances expected from the simulation and measured in beam tests of a small scale prototype. △ Less

Submitted 27 January, 2017; originally announced January 2017.

Comments: 11 pages, 7 figures, proceedings of 14th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD16) 3 - 6 October 2016 Siena, Italy, Journal of Instrumentation, Volume 12, January 2017 http://stacks.iop.org/1748-0221/12/i=01/a=C01061

Irradiation study of UV Silicon Photomultipliers for the Mu2e Calorimeter

Authors: S. Baccaro, A. Cemmi, M. Cordelli, E. Diociaiuti, R. Donghia, A. Ferrari, S. Giovannella, S. Miscetti, S. Müller, M. Pillon, I. Sarra

Abstract: The Mu2e calorimeter is composed of 1400 un-doped CsI crystals, coupled to large area UV extended Silicon Photomultipliers (SiPMs), arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position resolutions. It should also be fast enough to handle the high rate background and it must operate and survive in the high radiation environment. Simulatio… ▽ More The Mu2e calorimeter is composed of 1400 un-doped CsI crystals, coupled to large area UV extended Silicon Photomultipliers (SiPMs), arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position resolutions. It should also be fast enough to handle the high rate background and it must operate and survive in the high radiation environment. Simulation studies estimated that, in the highest irradiated regions, each photo-sensor will absorb a dose of 20 krad and will be exposed to a neutron fluency of 5.5x10^11 n_(1MeV)/cm^2 in three years of running, with a safety factor of 3 included. At the end of 2015, we have concluded an irradiation campaign at the Frascati Neutron Generator (FNG, Frascati, Italy) measuring the response of two different 16 array models from Hamamatsu, which differ for the protection windows and a SiPM from FBK. In 2016, we have carried out two additional irradiation campaigns with neutrons and photons at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR, Dresden, Germany) and at the Calliope gamma irradiation facility at ENEA-Casaccia, respectively. A negligible increment of the leakage current and no gain change have been observed with the dose irradiation. On the other hand, at the end of the neutron irradiation, the gain does not show large changes whilst the leakage current increases by around a factor of 2000. In these conditions, the too high leakage current makes problematic to bias the SiPMs, thus requiring to cool them down to a running temperature of ~0 °C. △ Less

Submitted 23 January, 2017; originally announced January 2017.

Measurement of the running of the fine structure constant below 1 GeV with the KLOE Detector

Authors: The KLOE-2 Collaboration, :, A. Anastasi, D. Babusci, G. Bencivenni, M. Berlowski, C. Bloise, F. Bossi, P. Branchini, A. Budano, L. Caldeira Balkeståhl, B. Cao, F. Ceradini, P. Ciambrone, F. Curciarello, E. Czerwiński, G. D'Agostini, E. Dané, V. De Leo, E. De Lucia, A. De Santis, P. De Simone, A. Di Cicco, A. Di Domenico, R. Di Salvo , et al. (42 additional authors not shown)

Abstract: We have measured the running of the effective QED coupling constant $α(s)$ in the time-like region $0.6<\sqrt s< 0.975$ GeV with the KLOE detector at DA$Φ$NE using the Initial State Radiation process $e^+e^-\toμ^+ μ^-γ$. It represents the first measurement of the running of $α(s)$ in this energy region. Our results show a more than 5$σ$ significance of the hadronic contribution to the running of… ▽ More We have measured the running of the effective QED coupling constant $α(s)$ in the time-like region $0.6<\sqrt s< 0.975$ GeV with the KLOE detector at DA$Φ$NE using the Initial State Radiation process $e^+e^-\toμ^+ μ^-γ$. It represents the first measurement of the running of $α(s)$ in this energy region. Our results show a more than 5$σ$ significance of the hadronic contribution to the running of $α(s)$, which is the strongest direct evidence both in time- and space-like regions achieved in a single measurement. By using the $e^+e^-\toπ^+π^-$ cross section measured by KLOE, the real and imaginary part of the shift $Δα(s)$ has been extracted. By a fit of the real part of $Δα(s)$ and assuming the lepton universality the branching ratio $BR(ω\toμ^+μ^-) = (6.6\pm1.4_{stat}\pm1.7_{syst})\cdot 10^{-5} $ has been determined. △ Less

Submitted 10 April, 2017; v1 submitted 21 September, 2016; originally announced September 2016.

Comments: 19 pages, 8 figures, version accepted for publication in Phys. Lett. B

Design and status of the Mu2e electromagnetic calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Dane', Yu. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic… ▽ More The Mu2e experiment at Fermilab aims at measuring the neutrinoless conversion of a negative muon into an electron and reach a single event sensitivity of 2.5x10^{-17} after three years of data taking. The monoenergetic electron produced in the final state, is detected by a high precision tracker and a crystal calorimeter, all embedded in a large superconducting solenoid (SD) surrounded by a cosmic ray veto system. The calorimeter is complementary to the tracker, allowing an independent trigger and powerful particle identification, while seeding the track reconstruction and contributing to remove background tracks mimicking the signal. In order to match these requirements, the calorimeter should have an energy resolution of O(5)% and a time resolution better than 500 ps at 100 MeV. The baseline solution is a calorimeter composed of two disks of BaF2 crystals read by UV extended, solar blind, Avalanche Photodiode (APDs), which are under development from a JPL, Caltech, RMD consortium. In this paper, the calorimeter design, the R&D studies carried out so far and the status of engineering are described. A backup alternative setup consisting of a pure CsI crystal matrix read by UV extended Hamamatsu MPPC's is also presented. △ Less

Submitted 8 August, 2016; originally announced August 2016.

Comments: 5 pages, 6 figures

Journal ref: Nucl. Instrum. Meth. A 824 (2016) 695

Radiation hardness test of un-doped CsI crystals and Silicon Photomultipliers for the Mu2e calorimeter

Authors: Stefania Baccaro, Alessia Cemmi, Marco Cordelli, Eleonora Diociaiuti, Raffaella Donghia, Simona Giovannella, Stefano Loreti, Stefano Miscetti, Mario Pillon, Ivano Sarra

Abstract: The Mu2e calorimeter is composed by 1400 un-doped CsI crystals coupled to large area UV extended Silicon Photomultipliers arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position. It should also be fast enough to handle the high rate background and it must operate and survive in a high radiation environment. Simulation studies estimated that… ▽ More The Mu2e calorimeter is composed by 1400 un-doped CsI crystals coupled to large area UV extended Silicon Photomultipliers arranged in two annular disks. This calorimeter has to provide precise information on energy, timing and position. It should also be fast enough to handle the high rate background and it must operate and survive in a high radiation environment. Simulation studies estimated that, in the hottest regions, each crystal will absorb a dose of 300 Gy and will be exposed to a neutron fluency of 6 x 10^{11} n/cm^2 in 3 years of running. Test of un-doped CsI crystals irradiated up to 900 Gy and to a neutron fluency up to 9 x 10^{11} n/cm^2 have been performed at CALLIOPE and FNG ENEA facilities in Italy. We present our study on the variation of light yield (LY) and longitudinal response uniformity (LRU) of these crystals after irradiation. The ionization dose does not modify LRU while a 20% reduction in LY is observed at 900 Gy. Similarly, the neutron flux causes an acceptable LY deterioration (<15%). A neutron irradiation test on different types of SIPMs (two different array models from Hamamatsu and one from FBK) have also been carried out by measuring the variation of the leakage current and the charge response to an ultraviolet led. We concluded that, in the experiment, we will need to cool down the SIPMs to 0 C reduce the leakage current to an acceptable level. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: Presented at CALOR 2016, 15-20 May. Submitted to Journal of Physics: Conference Series (JPCS)

Longitudinal uniformity, time performance and irradiation test of pure CsI crystals

Authors: M. Angelucci, O. Atanova, S. Baccaro, A. Cemmi, M. Cordelli, R. Donghia, S. Giovannella, F. Happacher, S. Miscetti, I. Sarra, S. R. Soleti

Abstract: To study an alternative to BaF2, as the crystal choice for the Mu2e calorimeter, thirteen pure CsI crystals from Opto Materials and ISMA producers have been characterized by determining their light yield (LY) and longitudinal response uniformity (LRU), when read with a UV extended PMT. The crystals show a LY of ~ 100 p.e./MeV (~ 150 p.e./MeV) when wrapped with Tyvek and coupled to the PMT without… ▽ More To study an alternative to BaF2, as the crystal choice for the Mu2e calorimeter, thirteen pure CsI crystals from Opto Materials and ISMA producers have been characterized by determining their light yield (LY) and longitudinal response uniformity (LRU), when read with a UV extended PMT. The crystals show a LY of ~ 100 p.e./MeV (~ 150 p.e./MeV) when wrapped with Tyvek and coupled to the PMT without (with) optical grease. The LRU is well represented by a linear slope that is on average around -0.6 %/cm. The timing performances of the Opto Materials crystal, read with a UV extended MPPC, have been evaluated with minimum ionizing particles. A timing resolution of ~ 330 ps (~ 440 ps) is achieved when connecting the photosensor to the MPPC with (without) optical grease. The crystal radiation hardness to a ionization dose has also been studied for one pure CsI crystal from SICCAS. After exposing it to a dose of 900 Gy, a decrease of 33% in the LY is observed while the LRU remains unchanged. △ Less

Submitted 21 June, 2016; originally announced June 2016.

Comments: Presented at Frontier Detectors for Frontier Physics,13th Pisa Meeting on Advanced Detectors, 24-30 May 2015 (2 pages, 4 figures)

Journal ref: NIMA58284, Nuclear Inst. and Methods in Physics Research, A (2016), pp. 678-680

Design, status and test of the Mu2e crystal calorimeter

Authors: N. Atanov, V. Baranov, J. Budagov, R. Carosi, F. Cervelli, F. Colao, M. Cordelli, G. Corradi, E. Danè, Y. I. Davydov, S. Di Falco, S. Donati, R. Donghia, B. Echenard, K. Flood, S. Giovannella, V. Glagolev, F. Grancagnolo, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Murat , et al. (11 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important… ▽ More The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of a aluminum nucleus. The dynamic of such a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important role to provide excellent particle identification capabilities and an online trigger filter while aiding the track reconstruction capabilities. The baseline calorimeter configuration consists of two disks each made with about 700 undoped CsI crystals read out by two large area UV-extended Silicon Photomultipliers. These crystals match the requirements for stability of response, high resolution and radiation hardness. In this paper we present the final calorimeter design. △ Less

Submitted 1 July, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Energy and time resolution for a LYSO matrix prototype of the Mu2e experiment

Authors: N. Atanov, V. Baranov, F. Colao, M. Cordelli, G. Corradi, E. Dane`, Y. I. Davydov, K. Flood, S. Giovannella, V. Glagolev, F. Happacher, D. G. Hitlin, M. Martini, S. Miscetti, T. Miyashita, L. Morescalchi, P. Ott, G. Pezzullo, A. Saputi, I. Sarra, S. R. Soleti, G. Tassielli, V. Tereshchenko, A. Thomas

Abstract: We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. We have measured the performances of a LYSO crystal matrix prototype tested with electron and photon beams in the energy range 60$-$450 MeV. This study has been carried out to determine the achievable energy and time resolutions for the calorimeter of the Mu2e experiment. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Comments: 2 pages, 3 figures, 13th Pisa Meeting on Advanced Detectors

Journal ref: Nucl. Instr. Meth. A 824 (2016) 684

Limit on the production of a new vector boson in $\mathrm{e^+ e^-}\rightarrow {\rm U}γ$, U$\rightarrow π^+π^-$ with the KLOE experiment

Authors: KLOE-2 Collaboration, :, A. Anastasi, D. Babusci, G. Bencivenni, M. Berlowski, C. Bloise, F. Bossi, P. Branchini, A. Budano, L. Caldeira Balkeståhl, B. Cao, F. Ceradini, P. Ciambrone, F. Curciarello, E. Czerwinski, G. D'Agostini, E. Danè, V. De Leo, E. De Lucia, A. De Santis, P. De Simone, A. Di Cicco, A. Di Domenico, R. Di Salvo , et al. (41 additional authors not shown)

Abstract: The recent interest in a light gauge boson in the framework of an extra U(1) symmetry motivates searches in the mass range below 1 GeV. We present a search for such a particle, the dark photon, in ${\rm e^+ e^-}\rightarrow {\rm U}γ$, U$\rightarrow π^+π^-$ based on 28 million $\mathrm{e^+ e^-} \rightarrow π^+ π^-γ$ events collected at DA$Φ$NE by the KLOE experiment. The $π^+ π^-$ production by in… ▽ More The recent interest in a light gauge boson in the framework of an extra U(1) symmetry motivates searches in the mass range below 1 GeV. We present a search for such a particle, the dark photon, in ${\rm e^+ e^-}\rightarrow {\rm U}γ$, U$\rightarrow π^+π^-$ based on 28 million $\mathrm{e^+ e^-} \rightarrow π^+ π^-γ$ events collected at DA$Φ$NE by the KLOE experiment. The $π^+ π^-$ production by initial-state radiation compensates for a loss of sensitivity of previous KLOE ${\rm U} \rightarrow \mathrm{e^+ e^-}$, $μ^+μ^-$ searches due to the small branching ratios in the $ρ-ω$ resonance region. We found no evidence for a signal and set a limit at 90\% CL on the mixing strength between the photon and the dark photon, $\varepsilon^2$, in the U mass range between $527$ and $987$~MeV. Above 700 MeV this new limit is more stringent than previous ones. △ Less

Submitted 19 March, 2016; originally announced March 2016.

Comments: 6 pages, 9 figures, 1 table, submitted to Phys. Lett. B

Journal ref: Physics Letters B 757 (2016) pp. 356-361

Precision measurement of the $η\toπ^+π^-π^0$ Dalitz plot distribution with the KLOE detector

Authors: KLOE-2 Collaboration, :, A. Anastasi, D. Babusci, G. Bencivenni, M. Berlowski, C. Bloise, F. Bossi, P. Branchini, A. Budano, L. Caldeira Balkeståhl, B. Cao, F. Ceradini, P. Ciambrone, F. Curciarello, E. Czerwiński, G. D'Agostini, E. Dané, V. De Leo, E. De Lucia, A. De Santis, P. De Simone, A. Di Cicco, A. Di Domenico, R. Di Salvo , et al. (40 additional authors not shown)

Abstract: Using $1.6$ fb$^{-1}$ of $e^+ e^-\toφ\toηγ$ data collected with the KLOE detector at DA$Φ$NE, the Dalitz plot distribution for the $η\to π^+ π^- π^0$ decay is studied with the world's largest sample of $\sim 4.7 \cdot 10^6$ events. The Dalitz plot density is parametrized as a polynomial expansion up to cubic terms in the normalized dimensionless variables $X$ and $Y$. The experiment is sensitive t… ▽ More Using $1.6$ fb$^{-1}$ of $e^+ e^-\toφ\toηγ$ data collected with the KLOE detector at DA$Φ$NE, the Dalitz plot distribution for the $η\to π^+ π^- π^0$ decay is studied with the world's largest sample of $\sim 4.7 \cdot 10^6$ events. The Dalitz plot density is parametrized as a polynomial expansion up to cubic terms in the normalized dimensionless variables $X$ and $Y$. The experiment is sensitive to all charge conjugation conserving terms of the expansion, including a $gX^2Y$ term. The statistical uncertainty of all parameters is improved by a factor two with respect to earlier measurements. △ Less

Submitted 26 January, 2016; originally announced January 2016.

Comments: 11 pages, 9 figures, supplement: an ascii table