-
Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map
Authors:
Ivan Alonso,
Cristiano Alpigiani,
Brett Altschul,
Henrique Araujo,
Gianluigi Arduini,
Jan Arlt,
Leonardo Badurina,
Antun Balaz,
Satvika Bandarupally,
Barry C Barish Michele Barone,
Michele Barsanti,
Steven Bass,
Angelo Bassi,
Baptiste Battelier,
Charles F. A. Baynham,
Quentin Beaufils,
Aleksandar Belic,
Joel Berge,
Jose Bernabeu,
Andrea Bertoldi,
Robert Bingham,
Sebastien Bize,
Diego Blas,
Kai Bongs,
Philippe Bouyer
, et al. (224 additional authors not shown)
Abstract:
We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, a…
▽ More
We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Supersymmetry Parameter Analysis: SPA Convention and Project
Authors:
J. A. Aguilar-Saavedra,
A. Ali,
B. C. Allanach,
R. Arnowitt,
H. A. Baer,
J. A. Bagger,
C. Balazs,
V. Barger,
M. Barnett,
A. Bartl,
M. Battaglia,
P. Bechtle,
G. Belanger,
A. Belyaev,
E. L. Berger,
G. Blair,
E. Boos,
M. Carena,
S. Y. Choi,
F. Deppisch,
A. De Roeck,
K. Desch,
M. A. Diaz,
A. Djouadi,
B. Dutta
, et al. (100 additional authors not shown)
Abstract:
High-precision analyses of supersymmetry parameters aim at reconstructing the fundamental supersymmetric theory and its breaking mechanism. A well defined theoretical framework is needed when higher-order corrections are included. We propose such a scheme, Supersymmetry Parameter Analysis SPA, based on a consistent set of conventions and input parameters. A repository for computer programs is pr…
▽ More
High-precision analyses of supersymmetry parameters aim at reconstructing the fundamental supersymmetric theory and its breaking mechanism. A well defined theoretical framework is needed when higher-order corrections are included. We propose such a scheme, Supersymmetry Parameter Analysis SPA, based on a consistent set of conventions and input parameters. A repository for computer programs is provided which connect parameters in different schemes and relate the Lagrangian parameters to physical observables at LHC and high energy e+e- linear collider experiments, i.e., masses, mixings, decay widths and production cross sections for supersymmetric particles. In addition, programs for calculating high-precision low energy observables, the density of cold dark matter (CDM) in the universe as well as the cross sections for CDM search experiments are included. The SPA scheme still requires extended efforts on both the theoretical and experimental side before data can be evaluated in the future at the level of the desired precision. We take here an initial step of testing the SPA scheme by applying the techniques involved to a specific supersymmetry reference point.
△ Less
Submitted 7 December, 2005; v1 submitted 30 November, 2005;
originally announced November 2005.
-
The CMS Event Builder
Authors:
V. Brigljevic,
G. Bruno,
E. Cano,
S. Cittolin,
A. Csilling,
D. Gigi,
F. Glege,
R. Gomez-Reino,
M. Gulmini,
J. Gutleber,
C. Jacobs,
M. Kozlovszky,
H. Larsen,
I. Magrans de Abril,
F. Meijers,
E. Meschi,
S. Murray,
A. Oh,
L. Orsini,
L. Pollet,
A. Racz,
D. Samyn,
P. Scharff-Hansen,
C. Schwick,
P. Sphicas
, et al. (10 additional authors not shown)
Abstract:
The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation.
This paper describes…
▽ More
The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation.
This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented.
The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragments of 8 data sources. The second stage combines the 64 super-fragments into full events. This architecture allows installation of the second stage of the event builder in steps, with the overall throughput scaling linearly with the number of switches in the second stage. Possible implementations of the components of the event builder are discussed and the expected performance of the full event builder is outlined.
△ Less
Submitted 20 June, 2003;
originally announced June 2003.
-
Run Control and Monitor System for the CMS Experiment
Authors:
M. Bellato,
L. Berti,
V. Brigljevic,
G. Bruno,
E. Cano,
S. Cittolin,
A. Csilling,
S. Erhan,
D. Gigi,
F. Glege,
R. Gomez-Reino,
M. Gulmini,
J. Gutleber,
C. Jacobs,
M. Kozlovszky,
H. Larsen,
I. Magrans,
G. Maron,
F. Meijers,
E. Meschi,
S. Murray,
A. Oh,
L. Orsini,
L. Pollet,
A. Racz
, et al. (8 additional authors not shown)
Abstract:
The Run Control and Monitor System (RCMS) of the CMS experiment is the set of hardware and software components responsible for controlling and monitoring the experiment during data-taking. It provides users with a "virtual counting room", enabling them to operate the experiment and to monitor detector status and data quality from any point in the world. This paper describes the architecture of t…
▽ More
The Run Control and Monitor System (RCMS) of the CMS experiment is the set of hardware and software components responsible for controlling and monitoring the experiment during data-taking. It provides users with a "virtual counting room", enabling them to operate the experiment and to monitor detector status and data quality from any point in the world. This paper describes the architecture of the RCMS with particular emphasis on its scalability through a distributed collection of nodes arranged in a tree-based hierarchy. The current implementation of the architecture in a prototype RCMS used in test beam setups, detector validations and DAQ demonstrators is documented. A discussion of the key technologies used, including Web Services, and the results of tests performed with a 128-node system are presented.
△ Less
Submitted 18 June, 2003;
originally announced June 2003.
-
Using XDAQ in Application Scenarios of the CMS Experiment
Authors:
L. Berti,
V. Brigljevic,
G. Bruno,
E. Cano,
A. Csilling,
S. Cittolin,
F. Drouhin,
S. Erhan,
D. Gigi,
F. Glege,
M. Gulmini,
J. Gutleber,
C. Jacobs,
M. Kozlowski,
H. Larsen,
I. Magrans,
G. Maron,
F. Meijers,
E. Meschi,
L. Mirabito,
S. Murray,
V. O? Dell,
A. Oh,
L. Orsini,
L. Pollet
, et al. (9 additional authors not shown)
Abstract:
XDAQ is a generic data acquisition software environment that emerged from a rich set of of use-cases encountered in the CMS experiment. They cover not the deployment for multiple sub-detectors and the operation of different processing and networking equipment as well as a distributed collaboration of users with different needs. The use of the software in various application scenarios demonstrate…
▽ More
XDAQ is a generic data acquisition software environment that emerged from a rich set of of use-cases encountered in the CMS experiment. They cover not the deployment for multiple sub-detectors and the operation of different processing and networking equipment as well as a distributed collaboration of users with different needs. The use of the software in various application scenarios demonstrated the viability of the approach. We discuss two applications, the tracker local DAQ system for front-end commissioning and the muon chamber validation system. The description is completed by a brief overview of XDAQ.
△ Less
Submitted 26 May, 2003;
originally announced May 2003.
-
High Transverse Momentum Physics at the Large Hadron Collider
Authors:
The ATLAS Collaboration,
the CMS Collaboration,
J. G. Branson,
D. Denegri,
I. Hinchliffe,
F. Gianotti,
F. E. Paige,
P. Sphicas
Abstract:
This note summarizes many detailed physics studies done by the ATLAS and CMS Collaborations for the LHC, concentrating on processes involving the production of high mass states. These studies show that the LHC should be able to elucidate the mechanism of electroweak symmetry breaking and to study a variety of other topics related to physics at the TeV scale. In particular, a Higgs boson with cou…
▽ More
This note summarizes many detailed physics studies done by the ATLAS and CMS Collaborations for the LHC, concentrating on processes involving the production of high mass states. These studies show that the LHC should be able to elucidate the mechanism of electroweak symmetry breaking and to study a variety of other topics related to physics at the TeV scale. In particular, a Higgs boson with couplings given by the Standard Model is observable in several channels over the full range of allowed masses. Its mass and some of its couplings will be determined. If supersymmetry is relevant to electroweak interactions, it will be discovered and the properties of many supersymmetric particles elucidated. Other new physics, such as the existence of massive gauge bosons and extra dimensions can be searched for extending existing limits by an order of magnitude or more.
△ Less
Submitted 1 October, 2001;
originally announced October 2001.
-
Extracting $α$ from the CP Asymmetry in $B^0 \to π^+ π^-$ Decays
Authors:
F. DeJongh,
P. Sphicas
Abstract:
The extraction of the CKM angle $α$ from the asymmetry in $B^0 \to π^+π^-$ vs ${\bar B^0} \to π^+π^-$ suffers from a currently unknown penguin contribution. Experimentally, one can determine the magnitude and phase of the CP asymmetry from a time-dependent analysis of tagged events, and the average rate for $B^0$ and $\bar{B}^0$ decays to $π^+π^-$ from untagged events. These measurements, togeth…
▽ More
The extraction of the CKM angle $α$ from the asymmetry in $B^0 \to π^+π^-$ vs ${\bar B^0} \to π^+π^-$ suffers from a currently unknown penguin contribution. Experimentally, one can determine the magnitude and phase of the CP asymmetry from a time-dependent analysis of tagged events, and the average rate for $B^0$ and $\bar{B}^0$ decays to $π^+π^-$ from untagged events. These measurements, together with the magnitudes and relative phase of the tree and penguin diagrams, can in principle completely determine $α$, free of discrete ambiguities. We perform an error analysis on $α$ given assumptions on the values and uncertainties of both the measurements and theoretical inputs.
△ Less
Submitted 27 July, 1995;
originally announced July 1995.
