-
Double helical plasmonic antennas
Authors:
Aleksei Tsarapkin,
Luka Zurak,
Krzysztof Maćkosz,
Ivo Utke,
Thorsten Feichtner,
Katja Höflich
Abstract:
Plasmonic double helical antennas are a means to funnel circularly polarized states of light down to the nanoscale. Here, an existing design tool for single helices is extended to the case of double helices and used to design antennas that combine large chiroptical interaction strength with highly directional light emission. Full-field numerical modeling underpins the design and provides additiona…
▽ More
Plasmonic double helical antennas are a means to funnel circularly polarized states of light down to the nanoscale. Here, an existing design tool for single helices is extended to the case of double helices and used to design antennas that combine large chiroptical interaction strength with highly directional light emission. Full-field numerical modeling underpins the design and provides additional insight into surface charge distributions and resonance widths. The experimentally realized double helical antennas were studied regarding their polarization-dependent transmission behavior resulting in a large and broadband dissymmetry factor in the visible range. Since the polarization of light is an important tool for implementing logic functionality in photonic and quantum photonic devices, these helices are potential building blocks for future nanophotonic circuits, but also for chiral metamaterials or phase plates.
△ Less
Submitted 20 July, 2024;
originally announced July 2024.
-
Direct electron beam writing of silver using a $β$-diketonate precursor: first insights
Authors:
Katja Höflich,
Krzysztof Mackosz,
Chinmai S. Jureddy,
Aleksei Tsarapkin,
Ivo Utke
Abstract:
Direct electron beam writing is a powerful tool for fabricating complex nanostructures in a single step. The electron beam locally cleaves the molecules of an adsorbed gaseous precursor to form a deposit, similar to 3D printing but without the need for a resist or development step. Here, we employ for the first time a silver $β$-diketonate precursor for focused electron beam induced deposition (FE…
▽ More
Direct electron beam writing is a powerful tool for fabricating complex nanostructures in a single step. The electron beam locally cleaves the molecules of an adsorbed gaseous precursor to form a deposit, similar to 3D printing but without the need for a resist or development step. Here, we employ for the first time a silver $β$-diketonate precursor for focused electron beam induced deposition (FEBID). The used compound (hfac)AgPMe$_3$ operates at an evaporation temperature of 70 - 80°C and is compatible with commercially available gas injection systems used in any standard scanning electron microscope. Growth of smooth 3D geometries could be demonstrated for tightly focused electron beams, albeit with low silver contents in the deposit volume. The electron beam induced deposition proved sensitive to the irradiation conditions leading to varying compositions of the deposit and internal inhomogeneities such as the formation of a layered structure consisting of a pure silver layer at the interface to the substrate covered by a deposit layer with low silver content. Imaging after the deposition process revealed morphological changes such as the growth of silver particles on the surface. While these effects complicate the application for 3D printing, the unique deposit structure with a thin, compact silver film beneath the deposit body is interesting from a fundamental point of view and may offer additional opportunities for applications.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Chiral and directional optical emission from a dipole source coupled to a helical plasmonic antenna
Authors:
Lilli Kuen,
Lorenz Löffler,
Aleksei Tsarapkin,
Lin Zschiedrich,
Thorsten Feichtner,
Sven Burger,
Katja Höflich
Abstract:
Plasmonic antennas with helical geometry are capable transducers between linearly polarized dipole emission and purely circular polarized far-fields. Besides large Purcell enhancements they possess a wide tunability due to the geometry dependence of their resonant modes. Here, the coupling of a dipole emitter embedded in a thin film to plasmonic single and double helices is numerically studied. Us…
▽ More
Plasmonic antennas with helical geometry are capable transducers between linearly polarized dipole emission and purely circular polarized far-fields. Besides large Purcell enhancements they possess a wide tunability due to the geometry dependence of their resonant modes. Here, the coupling of a dipole emitter embedded in a thin film to plasmonic single and double helices is numerically studied. Using a higher-order finite element method (FEM) the wavelength dependent Purcell enhancement of a dipole with different positions and orientations is calculated and the far-fields with respect to their chirality and radiation patterns are analyzed. Both single and double helices demonstrate highly directional and circularly polarized far-fields for resonant excitation but with significantly improved directional radiation for the case of double helices.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Area Selective Chemical Vapor Deposition of Gold by Electron Beam Seeding
Authors:
Aleksei Tsarapkin,
Krzysztof Maćkosz,
Chinmai Sai Jureddy,
Ivo Utke,
Katja Höflich
Abstract:
Chemical vapour deposition (CVD) is an established method for producing high-purity thin films, but it typically necessitates the pre- and post-processing of a mask to produce structures. This paper presents a novel maskless patterning technique that enables area selective CVD of gold. A focused electron beam is used to decompose the metal-organic precursor Au(acac)Me$_2$ locally, thereby creating…
▽ More
Chemical vapour deposition (CVD) is an established method for producing high-purity thin films, but it typically necessitates the pre- and post-processing of a mask to produce structures. This paper presents a novel maskless patterning technique that enables area selective CVD of gold. A focused electron beam is used to decompose the metal-organic precursor Au(acac)Me$_2$ locally, thereby creating an autocatalytically active seed layer for subsequent CVD with the same precursor. The procedure can be included in the same CVD cycle without the need for clean room lithographic processing. Moreover, it operates at low temperatures of 80 °C, over 200 K lower than standard CVD temperatures for this precursor, reducing thermal load on the specimen. Given that electron beam seeding operates on any even moderately conductive surface, the process does not constrain device design. This is demonstrated by the example of vertical nanostructures with high aspect ratios of around 40:1 and more. Written using a focused electron beam and the same precursor, these nanopillars exhibit catalytically active nuclei on their surface. Furthermore, they allow for the first time the precise determination of the local temperature increase caused by the writing of nanostructures with an electron beam.
△ Less
Submitted 16 April, 2024; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Towards tunable graphene phononic crystals
Authors:
Yuefeng Yu,
Jan N. Kirchhof,
Aleksei Tsarapkin,
Victor Deinhart,
Oguzhan Yucel,
Bianca Höfer,
Katja Höflich,
Kirill I. Bolotin
Abstract:
Phononic crystals (PnCs) are artificially patterned media exhibiting bands of allowed and forbidden zones for phonons. Many emerging applications of PnCs from solid-state simulators to quantum memories could benefit from the on-demand tunability of the phononic band structure. Here, we demonstrate the fabrication of suspended graphene PnCs in which the phononic band structure is controlled by mech…
▽ More
Phononic crystals (PnCs) are artificially patterned media exhibiting bands of allowed and forbidden zones for phonons. Many emerging applications of PnCs from solid-state simulators to quantum memories could benefit from the on-demand tunability of the phononic band structure. Here, we demonstrate the fabrication of suspended graphene PnCs in which the phononic band structure is controlled by mechanical tension applied electrostatically. We show signatures of a mechanically tunable phononic band gap. The experimental data supported by simulation suggest a phononic band gap at 28$-$33 MHz in equilibrium, which upshifts by 9 MHz under a mechanical tension of 3.1 Nm$^{-1}$. This is an essential step towards tunable phononics paving the way for more experiments on phononic systems based on 2D materials.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
