Showing 1–50 of 53 results for author: Kern, P

TOI-269 b: An eccentric sub-Neptune transiting a M2 dwarf revisited with ExTrA

Authors: M. Cointepas, J. M. Almenara, X. Bonfils, F. Bouchy, N. Astudillo-Defru, F. Murgas, J. F. Otegi, A. Wyttenbach, D. R. Anderson, E. Artigau, B. L. Canto Martins, D. Charbonneau, K. A. Collins, K. I. Collins, J-J. Correia, S. Curaba, A. Delboulbe, X. Delfosse, R. F. Diaz, C. Dorn, R. Doyon, P. Feautrier, P. Figueira, T. Forveille, G. Gaisne , et al. (37 additional authors not shown)

Abstract: We present the confirmation of a new sub-Neptune close to the transition between super-Earths and sub-Neptunes transiting the M2 dwarf TOI- 269 (TIC 220479565, V = 14.4 mag, J = 10.9 mag, Rstar = 0.40 Rsun, Mstar = 0.39 Msun, d = 57 pc). The exoplanet candidate has been identified in multiple TESS sectors, and validated with high-precision spectroscopy from HARPS and ground-based photometric follo… ▽ More We present the confirmation of a new sub-Neptune close to the transition between super-Earths and sub-Neptunes transiting the M2 dwarf TOI- 269 (TIC 220479565, V = 14.4 mag, J = 10.9 mag, Rstar = 0.40 Rsun, Mstar = 0.39 Msun, d = 57 pc). The exoplanet candidate has been identified in multiple TESS sectors, and validated with high-precision spectroscopy from HARPS and ground-based photometric follow-up from ExTrA and LCO-CTIO. We determined mass, radius, and bulk density of the exoplanet by jointly modeling both photometry and radial velocities with juliet. The transiting exoplanet has an orbital period of P = 3.6977104 +- 0.0000037 days, a radius of 2.77 +- 0.12 Rearth, and a mass of 8.8 +- 1.4 Mearth. Since TOI-269 b lies among the best targets of its category for atmospheric characterization, it would be interesting to probe the atmosphere of this exoplanet with transmission spectroscopy in order to compare it to other sub-Neptunes. With an eccentricity e = 0.425+0.082-0.086, TOI-269 b has one of the highest eccentricities of the exoplanets with periods less than 10 days. The star being likely a few Gyr old, this system does not appear to be dynamically young. We surmise TOI-269 b may have acquired its high eccentricity as it migrated inward through planet-planet interactions. △ Less

Submitted 30 April, 2021; originally announced April 2021.

Comments: 23 pages, 16 figures, Accepted for publication in A&A

Journal ref: A&A 650, A145 (2021)

Spectrographs for astrophotonics

Authors: N. Blind, E. Le Coarer, P. Kern, S. Gousset

Abstract: The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, is planned to begin operation in the next decade and promises new challenges in the development of instruments since the instrument size increases in proportion to the telescope diameter D, and the cost as D2 or faster. The growing field of astrophotonics (the use of photonic technologies in astronomy) could s… ▽ More The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, is planned to begin operation in the next decade and promises new challenges in the development of instruments since the instrument size increases in proportion to the telescope diameter D, and the cost as D2 or faster. The growing field of astrophotonics (the use of photonic technologies in astronomy) could solve this problem by allowing mass production of fully integrated and robust instruments combining various optical functions, with the potential to reduce the size, complexity and cost of instruments. Astrophotonics allows for a broad range of new optical functions, with applications ranging from sky background filtering, high spatial and spectral resolution imaging and spectroscopy. In this paper, we want to provide astronomers with valuable keys to understand how photonics solutions can be implemented (or not) according to the foreseen applications. The paper introduces first key concepts linked to the characteristics of photonics technologies, placed in the framework of astronomy and spectroscopy. We then describe a series of merit criteria that help us determine the potential of a given micro-spectrograph technology for astronomy applications, and then take an inventory of the recent developments in integrated micro-spectrographs with potential for astronomy. We finally compare their performance, to finally draw a map of typical science requirements and pin the identified integrated technologies on it. We finally emphasize the necessary developments that must support micro-spectrograph in the coming years. △ Less

Submitted 6 July, 2017; originally announced July 2017.

Comments: 29 pages, 17 figures; accepted for publication in Optics Express, feature issue "Recent Advances in Astrophotonics"

A detector interferometric calibration experiment for high precision astrometry

Authors: A. Crouzier, F. Malbet, F. Henault, A. Leger, C. Cara, J. M. LeDuigou, O. Preis, P. Kern, A. Delboulbe, G. Martin, P. Feautrier, E. Stadler, S. Lafrasse, S. Rochat, C. Ketchazo, M. Donati, E. Doumayrou, P. O. Lagage, M. Shao, R. Goullioud, B. Nemati, C. Zhai, E. Behar, S. Potin, M. Saint-Pe , et al. (1 additional authors not shown)

Abstract: Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precisio… ▽ More Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precision calibration of the detector. Aims: We present a way to calibrate a detector for high accuracy astrometry. An experimental testbed combining an astrometric simulator and an interferometric calibration system is used to validate both the hardware needed for the calibration and the signal processing methods. The objective is an accuracy of 5e-6 pixel on the location of a Nyquist sampled polychromatic point spread function. Methods: The interferometric calibration system produced modulated Young fringes on the detector. The Young fringes were parametrized as products of time and space dependent functions, based on various pixel parameters. The minimization of func- tion parameters was done iteratively, until convergence was obtained, revealing the pixel information needed for the calibration of astrometric measurements. Results: The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than five pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached. △ Less

Submitted 8 September, 2016; originally announced September 2016.

Journal ref: A&A 595, A108 (2016)

The latest results from DICE (Detector Interferometric Calibration Experiment)

Authors: A. Crouzier, F. Malbet, F. Henault, A. Leger, C. Cara, J. M. LeDuigou, O. Preis, P. Kern, A. Delboulbe, G. Martin, P. Feautrier, E. Stadler, S. Lafrasse, S. Rochat, C. Ketchazo, M. Donati, E. Doumayrou, P. O. Lagage, M. Shao, R. Goullioud, B. Nemati, C. Zhai, E. Behar, S. Potin, M. Saint-Pe , et al. (1 additional authors not shown)

Abstract: Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times N… ▽ More Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The Theia consortium is operating a testbed in vacuum in order to achieve 1e-5 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the Theia spacecraft. The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the latest experiments conducted and the results obtained after a series of upgrades on the testbed was completed. The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than 5 pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached. △ Less

Submitted 1 August, 2016; originally announced August 2016.

ExTrA: Exoplanets in Transit and their Atmospheres

Authors: X. Bonfils, J. M. Almenara, L. Jocou, A. Wunsche, P. Kern, A. Delboulbé, X. Delfosse, P. Feautrier, T. Forveille, L. Gluck, S. Lafrasse, Y. Magnard, D. Maurel, T. Moulin, F. Murgas, P. Rabou, S. Rochat, A. Roux, E. Stadler

Abstract: The ExTrA facility, located at La Silla observatory, will consist of a near-infrared multi-object spectrograph fed by three 60-cm telescopes. ExTrA will add the spectroscopic resolution to the traditional differential photometry method. This shall enable the fine correction of color-dependent systematics that would otherwise hinder ground-based observations. With both this novel method and an infr… ▽ More The ExTrA facility, located at La Silla observatory, will consist of a near-infrared multi-object spectrograph fed by three 60-cm telescopes. ExTrA will add the spectroscopic resolution to the traditional differential photometry method. This shall enable the fine correction of color-dependent systematics that would otherwise hinder ground-based observations. With both this novel method and an infrared-enabled efficiency, ExTrA aims to find transiting telluric planets orbiting in the habitable zone of bright nearby M dwarfs. It shall have the versatility to do so by running its own independent survey and also by concurrently following-up on the space candidates unveiled by K2 and TESS. The exoplanets detected by ExTrA will be amenable to atmospheric characterisation with VLTs, JWST, and ELTs and could give our first peek into an exo-life laboratory. △ Less

Submitted 26 August, 2015; originally announced August 2015.

Comments: 15 pages, 11 figures, SPIE 2015

Astrophotonic micro-spectrographs in the era of ELTs

Authors: N. Blind, E. Le Coarer, P. Kern, J. Bland-Hawthorn

Abstract: The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, will start opera- tion in the next decade and promises new challenges in the development of instruments. The growing field of astrophotonics (the use of photonic technologies in astronomy) can partly solve this problem by allowing mass production of fully integrated and robust instruments combining various opt… ▽ More The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, will start opera- tion in the next decade and promises new challenges in the development of instruments. The growing field of astrophotonics (the use of photonic technologies in astronomy) can partly solve this problem by allowing mass production of fully integrated and robust instruments combining various optical functions, with the potential to reduce the size, complexity and cost of instruments. In this paper, we focus on developments in integrated micro-spectrographs and their potential for ELTs. We take an inventory of the identified technologies currently in development, and compare the performance of the different concepts. We show that in the current context of single-mode instruments, integrated spectrographs making use of, e.g., a photonic lantern can be a solution to reach the desired performance. However, in the longer term, there is a clear need to develop multimode devices to improve overall the throughput and sensitivity, while decreasing the instrument complexity. △ Less

Submitted 6 August, 2014; originally announced August 2014.

Comments: 9 pages. 2 figures. Proceeding of SPIE 9147 "Ground-based and Airborne Instrumentation for Astronomy V"

Metrology calibration and very high accuracy centroiding with the NEAT testbed

Authors: A. Crouzier, F. Malbet, O. Preis, F. Henault, P. Kern, G. Martin, P. Feautrier, E. Stadler, S. Lafrasse, A. Delboulbe, E. Behar, M. Saint-Pe, J. Dupont, S. Potin, C. Cara, M. Donati, E. Doumayrou, P. O. Lagage, A. Léger, J. M. LeDuigou, M. Shao, R. Goullioud

Abstract: NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL… ▽ More NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the experiments conducted and the results obtained since July 2013 when we had the first light on both the metrology and pseudo stars. We explain the data reduction procedures we used. △ Less

Submitted 5 July, 2014; originally announced July 2014.

First experimental results of very high accuracy centroiding measurements for the neat astrometric mission

Authors: A. Crouzier, F. Malbet, O. Preis, F. Henault, P. Kern, G. Martin, P. Feautrier, E. Stadler, S. Lafrasse, A. Delboulbe, E. Behar, M. Saint-Pe, J. Dupont, S. Potin, C. Cara, M. Donati, E. Doumayrou, P. O. Lagage, A. Leger, J. M. LeDuigou, M. Shao, R. Goullioud

Abstract: NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL… ▽ More NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. NEAT requires the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 2e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we present the metrology and the pseudo stellar sources sub-systems, we present a performance model and an error budget of the experiment and we report the present status of the demonstration. Finally we also present our first results: the experiment had its first light in July 2013 and a first set of data was taken in air. The analysis of this first set of data showed that we can already measure the pixel positions with an accuracy of about 1e-4 pixel. △ Less

Submitted 18 September, 2013; v1 submitted 13 September, 2013; originally announced September 2013.

Comments: SPIE conference proceedings

An experimental testbed for NEAT to demonstrate micro-pixel accuracy

Authors: A. Crouzier, F. Malbet, O. Preis, F. Henault, P. Kern, G. Martin, P. Feautrier, c. Cara, P. Lagage, A. Leger, J. M. LeDuigou, M. Shao, R. Goullioud

Abstract: NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 4e-5 pixel at Nyquist sampling. Simulations sh… ▽ More NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5e-6 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 4e-5 pixel at Nyquist sampling. Simulations showed that a precision of 2 micro-pixels can be reached, if intra and inter pixel quantum efficiency variations are calibrated and corrected for by a metrology system. The European part of the NEAT consortium is designing and building a testbed in vacuum in order to achieve 5e-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we give the basic relations and trade-offs that come into play for the design of a centroid testbed and its metrology system. We detail the different conditions necessary to reach the targeted precision, present the characteristics of our current design and describe the present status of the demonstration. △ Less

Submitted 30 August, 2012; v1 submitted 1 August, 2012; originally announced August 2012.

Comments: SPIE proceedings

Journal ref: SPIE Proceedings 2012 Vol. 8445

Advances in the Development of Mid-Infrared Integrated Devices for Interferometric Arrays

Authors: L. Labadie, Guillermo Martin, Airan Rodenas, Norman C. Anheier, Brahim Arezki, Robert R. Thomson, Hong A. Qiao, Pierre Kern, Ajoy K. Kar, Bruce E. Bernacki

Abstract: This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed. This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and analyzed. △ Less

Submitted 19 July, 2012; originally announced July 2012.

Comments: 12 pages, 9 figures, SPIE Astronomical Telescopes and Instrumentation

PIONIER: a status report

Authors: J. -B. Le Bouquin, J. -P. Berger, G. Zins, B. Lazareff, L. Jocou, P. Kern, R. Millan-Gabet, W. Traub, P. Haguenauer, O. Absil, J. -C. Augereau, M. Benisty, N. Blind, A. Delboulbe, P. Feautrier, M. Germain, D. Gillier, P. Gitton, M. Kiekebusch, J. Knudstrup, J. -L Lizon, Y. Magnard, F. Malbet, D. Maurel, F. Menard , et al. (11 additional authors not shown)

Abstract: The visitor instrument PIONIER provides VLTI with improved imaging capabilities and sensitivity. The instrument started routinely delivering scientific data in November 2010, that is less than 12 months after being approved by the ESO Science and Technical Committee. We recall the challenges that had to be tackled to design, built and commission PIONIER. We summarize the typical performances and s… ▽ More The visitor instrument PIONIER provides VLTI with improved imaging capabilities and sensitivity. The instrument started routinely delivering scientific data in November 2010, that is less than 12 months after being approved by the ESO Science and Technical Committee. We recall the challenges that had to be tackled to design, built and commission PIONIER. We summarize the typical performances and some astrophysical results obtained so far. We conclude this paper by summarizing lessons learned. △ Less

Submitted 10 July, 2012; originally announced July 2012.

Comments: To appear in the proceedings of the 2012 SPIE Conference "Astronomical Telescopes and Instrumentation"

Three-Dimensional Mid-Infrared Photonics: Recent Progress in Ultrafast Laser Writing of Waveguides

Authors: Airan Rodenas, Robert R. Thomson, Guillermo Martin, Pierre Kern, Ajoy K. Kar

Abstract: We present here our recent progress in the three-dimensional (3D) direct laser writing (DLW) of step-index core waveguides inside diverse technologically relevant dielectric substrates, with specific emphasis on the demonstration of DLW mid-infrared waveguiding in the whole transparency range of these materials. We present here our recent progress in the three-dimensional (3D) direct laser writing (DLW) of step-index core waveguides inside diverse technologically relevant dielectric substrates, with specific emphasis on the demonstration of DLW mid-infrared waveguiding in the whole transparency range of these materials. △ Less

Submitted 7 June, 2012; originally announced June 2012.

Comments: 3 pages, 6 figures

Searching for faint companions with VLTI/PIONIER. I. Method and first results

Authors: Olivier Absil, Jean-Baptiste Le Bouquin, Jean-Philippe Berger, Anne-Marie Lagrange, Gaël Chauvin, Bernard Lazareff, Gérard Zins, Pierre Haguenauer, Laurent Jocou, Pierre Kern, Rafael Millan-Gabet, Sylvain Rochat, Wes Traub

Abstract: Context. A new four-telescope interferometric instrument called PIONIER has recently been installed at VLTI. It provides improved imaging capabilities together with high precision. Aims. We search for low-mass companions around a few bright stars using different strategies, and determine the dynamic range currently reachable with PIONIER. Methods. Our method is based on the closure phase, which is… ▽ More Context. A new four-telescope interferometric instrument called PIONIER has recently been installed at VLTI. It provides improved imaging capabilities together with high precision. Aims. We search for low-mass companions around a few bright stars using different strategies, and determine the dynamic range currently reachable with PIONIER. Methods. Our method is based on the closure phase, which is the most robust interferometric quantity when searching for faint companions. We computed the chi^2 goodness of fit for a series of binary star models at different positions and with various flux ratios. The resulting chi^2 cube was used to identify the best-fit binary model and evaluate its significance, or to determine upper limits on the companion flux in case of non detections. Results. No companion is found around Fomalhaut, tau Cet and Regulus. The median upper limits at 3 sigma on the companion flux ratio are respectively of 2.3e-3 (in 4 h), 3.5e-3 (in 3 h) and 5.4e-3 (in 1.5 h) on the search region extending from 5 to 100 mas. Our observations confirm that the previously detected near-infrared excess emissions around Fomalhaut and tau Cet are not related to a low-mass companion, and instead come from an extended source such as an exozodiacal disk. In the case of del Aqr, in 30 min of observation, we obtain the first direct detection of a previously known companion, at an angular distance of about 40 mas and with a flux ratio of 2.05e-2 \pm 0.16e-2. Due to the limited u,v plane coverage, its position can, however, not be unambiguously determined. Conclusions. After only a few months of operation, PIONIER has already achieved one of the best dynamic ranges world-wide for multi-aperture interferometers. A dynamic range up to about 1:500 is demonstrated, but significant improvements are still required to reach the ultimate goal of directly detecting hot giant extrasolar planets. △ Less

Submitted 6 October, 2011; originally announced October 2011.

Comments: 11 pages, 6 figures, accepted for publication in A&A

PIONIER: a 4-telescope visitor instrument at VLTI

Authors: Jean-Baptiste Le Bouquin, J. -P. Berger, B. Lazareff, G. Zins, P. Haguenauer, L. Jocou, P. Kern, R. Millan-Gabet, W. Traub, O. Absil, J. -C. Augereau, M. Benisty, N. Blind, X. Bonfils, P. Bourget, A. Delboulbe, P. Feautrier, M. Germain, P. Gitton, D. Gillier, M. Kiekebusch, J. Kluska, J. Knudstrup, P. Labeye, J. -L. Lizon , et al. (21 additional authors not shown)

Abstract: PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific ob… ▽ More PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific observations since November 2010. In this paper, we detail the instrumental concept, we describe the standard operational modes and the data reduction strategy. We present the typical performance and discuss how to improve them. This paper is based on laboratory data obtained during the integrations at IPAG, as well as on-sky data gathered during the commissioning at VLTI. We illustrate the imaging capability of PIONIER on the binaries deltaSco and HIP11231. PIONIER provides 6 visibilities and 3 independent closure phases in the H band, either in a broadband mode or with a low spectral dispersion (R=40), using natural light (i.e. unpolarized). The limiting magnitude is Hmag=7 in dispersed mode under median atmospheric conditions (seeing<1", tau0>3ms) with the 1.8m Auxiliary Telescopes. We demonstrate a precision of 0.5deg on the closure phases. The precision on the calibrated visibilities ranges from 3 to 15% depending on the atmospheric conditions. PIONIER has been installed and successfully tested as a visitor instrument for the VLTI. It permits high angular resolution imaging studies at an unprecedented level of sensitivity. The successful combination of the four 8m Unit Telescopes in March 2011 demonstrates that VLTI is ready for 4-telescope operation. △ Less

Submitted 9 September, 2011; originally announced September 2011.

First fringes with an integrated-optics beam combiner at 10 um - A new step towards instrument miniaturization for mid-infrared interferometry

Authors: Lucas Labadie, Guillermo Martin, Norman C. Anheier, Brahim Arezki, H. A. Qiao, Bruce Bernacki, Pierre Kern

Abstract: Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a si… ▽ More Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a simplification of these instruments if we want to combine the light from a large number of telescopes. Integrated-optics appears as an alternative to the current conventional designs, especially if its use can be extended to a higher number of astronomical bands. This article reports for the first time the experimental demonstration of the feasibility of an integrated-optics approach to mid-infrared beam combination for single-mode stellar interferometry. We have fabricated a 2-telescope beam combiner prototype integrated on a substrate of chalcogenide glasses, a material transparent from 1 to 14 um. We have developed laboratory tools to characterize the modal properties and the interferometric capabilities of our device. We obtain fringes at 10 um and measure a mean contrast V=0.981 \pm 0.001 with high repeatability over one week and high stability over 5h. We show experimentally - as well as on the basis of modeling considerations - that the component has a single-mode behavior at this wavelength, which is essential to achieve high-accuracy interferometry. From previous studies, the propagation losses are estimated to 0.5 dB/cm for such components. We also discuss possible issues that may impact the interferometric contrast. The IO beam combiner performs well at 10. We also anticipate the requirement of a better matching between the numerical apertures of the component and the (de)coupling optics to optimize the total throughput. The next step foreseen is the achievement of wide-band interferograms. △ Less

Submitted 14 April, 2011; originally announced April 2011.

Comments: Accepted in A&A; 7 pages; 7 figures

First astronomical unit scale image of the GW Ori triple. Direct detection of a new stellar companion

Authors: J. -P. Berger, J. D. Monnier, R. Millan-Gabet, S. Renard, E. Pedretti, W. Traub, C. Bechet, M. Benisty, N. Carleton, P. Haguenauer, P. Kern, P. Labeye, F. Longa, M. Lacasse, F. Malbet, K. Perraut, S. Ragland, P. Schloerb, P. A. Schuller, E. Thiébaut

Abstract: Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is… ▽ More Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is one such system. It is one of the brightest young T Tauri stars and is surrounded by a massive disk. Our goal is to probe the GW Orionis multiplicity at angular scales at which we can spatially resolve the orbit. We used the IOTA/IONIC3 interferometer to probe the environment of GW Orionis with an astronomical unit resolution in 2003, 2004, and 2005. By measuring squared visibilities and closure phases with a good UV coverage we carry out the first image reconstruction of GW Ori from infrared long-baseline interferometry. We obtain the first infrared image of a T Tauri multiple system with astronomical unit resolution. We show that GW Orionis is a triple system, resolve for the first time the previously known inner pair (separation $ρ\sim$1.4 AU) and reveal a new more distant component (GW Ori C) with a projected separation of $\sim$8 AU with direct evidence of motion. Furthermore, the nearly equal (2:1) H-band flux ratio of the inner components suggests that either GW Ori B is undergoing a preferential accretion event that increases its disk luminosity or that the estimate of the masses has to be revisited in favour of a more equal mass-ratio system that is seen at lower inclination. Accretion disk models of GW Ori will need to be completely reconsidered because of this outer companion C and the unexpected brightness of companion B. △ Less

Submitted 20 March, 2011; originally announced March 2011.

Comments: 5 pages, 9 figures, accepted Astronomy and Astrophysics Letters. 2011

PIONIER: a visitor instrument for the VLTI

Authors: J. -P. Berger, G. Zins, B. Lazareff, J. -B. Lebouquin, L. Jocou, P. Kern, R. Millan-Gabet, W. Traub, P. Haguenauer, O. Absil, J. -C. Augereau, M. Benisty, N. Blind, X. Bonfils, A. Delboulbe, P. Feautrier, M. Germain, D. Gillier, P. Gitton, M. Kiekebusch, J. Knudstrup, J. -L Lizon, Y. Magnard, F. Malbet, D. Maurel , et al. (13 additional authors not shown)

Abstract: PIONIER is a 4-telescope visitor instrument for the VLTI, planned to see its first fringes in 2010. It combines four ATs or four UTs using a pairwise ABCD integrated optics combiner that can also be used in scanning mode. It provides low spectral resolution in H and K band. PIONIER is designed for imaging with a specific emphasis on fast fringe recording to allow closure-phases and visibilities to… ▽ More PIONIER is a 4-telescope visitor instrument for the VLTI, planned to see its first fringes in 2010. It combines four ATs or four UTs using a pairwise ABCD integrated optics combiner that can also be used in scanning mode. It provides low spectral resolution in H and K band. PIONIER is designed for imaging with a specific emphasis on fast fringe recording to allow closure-phases and visibilities to be precisely measured. In this work we provide the detailed description of the instrument and present its updated status. △ Less

Submitted 31 August, 2010; originally announced August 2010.

Comments: Proceedings of SPIE conference Optical and Infrared Interferometry II (Conference 7734) San Diego 2010

The Planar Optics Phase Sensor: a study for the VLTI 2nd Generation Fringe Tracker

Authors: Nicolas Blind, Jean-Baptiste LeBouquin, Olivier Absil, Mazen Alamir, Jean-Philippe Berger, Denis Defrère, Philippe Feautrier, Franois Hénault, Laurent Jocou, Pierre Kern, Thomas Laurent, Fabien Malbet, Denis Mourard, Karine Rousselet-Perrault, Alain Sarlette, Jean Surdej, Nassima Tarmoul, Eric Tatulli, Lionel Vincent

Abstract: In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has prop… ▽ More In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design. △ Less

Submitted 25 August, 2010; originally announced August 2010.

Journal ref: Proc. SPIE, Vol. 7734, 773424 (2010)

Phase closure nulling of HD 59717 with AMBER/VLTI . Detection of the close faint companion

Authors: G. Duvert, A. Chelli, F. Malbet, P. Kern

Abstract: Aims: The detection of close and faint companions is an essential step in many astrophysical fields, including the search for planetary companions. A new method called "phase closure nulling" has been proposed for the detection of such faint and close companions based on interferometric observations when the system visibility amplitude is close to zero due to the large diameter of the primary st… ▽ More Aims: The detection of close and faint companions is an essential step in many astrophysical fields, including the search for planetary companions. A new method called "phase closure nulling" has been proposed for the detection of such faint and close companions based on interferometric observations when the system visibility amplitude is close to zero due to the large diameter of the primary star. We aim at demonstrating this method by analyzing observations obtained on the spectroscopic binary HD 59717. Methods: Using the AMBER/VLTI instrument in the K-band with ~1500 spectral resolution, we record the spectrally dispersed closures phases of the SB1 binary HD 59717 with a three-baseline combination adequate for applying phase closure methods. After a careful data reduction, we fit the primary diameter, the binary flux ratio, and the separation using the phase closure data. Results: We detect the 5-mag fainter companion of HD 59717 at a distance of 4 stellar radii from the primary. We determine the diameter of the primary, infer the secondary's spectral type and determine the masses and sizes of the stars in the binary system. This is one of the highest contrasts detected by interferometry between a companion and its parent star. Based on observations collected at the European Southern Observatory, Paranal, Chile, within the commissioning programme 60.A-9054(A). △ Less

Submitted 27 January, 2010; originally announced January 2010.

Journal ref: Astronomy and Astrophysics509:66, 2010

Infrared Detection and Characterization of Debris Disks, Exozodiacal Dust, and Exoplanets: The FKSI Mission Concept

Authors: W. C. Danchi, R. K. Barry, B. Lopez, S. Rinehart, O. Absil, J. -C. Augereau, H. Beust, X. Bonfils, P. Borde, Denis Defrere, Pierre Kern, P. Lawson, A. Leger, J. -L. Monin, D. Mourard, M. Ollivier, R. Petrov, W. Traub, S. Unwin, F. Vakili

Abstract: The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a nulling interferometer for the near-to-mid-infrared spectral region. FKSI is conceived as a mid-sized strategic or Probe class mission. FKSI has been endorsed by the Exoplanet Community Forum 2008 as such a mission and has been costed to be within the expected budget. The current design of FKSI is a two-element nulling i… ▽ More The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a nulling interferometer for the near-to-mid-infrared spectral region. FKSI is conceived as a mid-sized strategic or Probe class mission. FKSI has been endorsed by the Exoplanet Community Forum 2008 as such a mission and has been costed to be within the expected budget. The current design of FKSI is a two-element nulling interferometer. The two telescopes, separated by 12.5 m, are precisely pointed (by small steering mirrors) on the target star. The two path lengths are accurately controlled to be the same to within a few nanometers. A phase shifter/beam combiner (Mach-Zehnder interferometer) produces an output beam consisting of the nulled sum of the target planet's light and the host star's light. When properly oriented, the starlight is nulled by a factor of 10^-4, and the planet light is undiminished. Accurate modeling of the signal is used to subtract the residual starlight, permitting the detection of planets much fainter than the host star. The current version of FKSI with 0.5-m apertures and waveband 3-8 microns has the following main capabilities: (1) detect exozodiacal emission levels to that of our own solar system (1 Solar System Zodi) around nearby F, G, and K, stars; (2) characterize spectroscopically the atmospheres of a large number of known non-transiting planets; (3) survey and characterize nearby stars for planets down to 2 Earth radii from just inside the habitable zone and inward. An enhanced version of FKSI with 1-m apertures separated by 20 m and cooled to 40 K, with science waveband 5-15 microns, allows for the detection and characterization of 2 Earth-radius super-Earths and smaller planets in the habitable zone around stars within about 30 pc. △ Less

Submitted 14 December, 2009; originally announced December 2009.

Comments: Pathways Conference, 6 pages, 7 figures

Phase closure nulling. Application to the spectroscopy of faint companions

Authors: A. Chelli, G. Duvert, F. Malbet, P. Kern

Abstract: We provide a complete theory of the phase closure of a binary system in which a small, feeble, and unresolved companion acts as a perturbing parameter on the spatial frequency spectrum of a dominant, bright, resolved source. We demonstrate that the influence of the companion can be measured with precision by measuring the phase closure of the system near the nulls of the primary visibility funct… ▽ More We provide a complete theory of the phase closure of a binary system in which a small, feeble, and unresolved companion acts as a perturbing parameter on the spatial frequency spectrum of a dominant, bright, resolved source. We demonstrate that the influence of the companion can be measured with precision by measuring the phase closure of the system near the nulls of the primary visibility function. In these regions of phase closure nulling, frequency intervals always exist where the phase closure signature of the companion is larger than any systematic error and can then be measured.We show that this technique allows retrieval of many astrophysically relevant properties of faint and close companions such as flux, position, and in favorable cases, spectrum. We conclude by a rapid study of the potentialities of phase closure nulling observations with current interferometers and explore the requirements for a new type of dedicated instrument. △ Less

Submitted 16 February, 2009; originally announced February 2009.

An integrated optics beam combiner for the second generation VLTI instruments

Authors: M. Benisty, J-P. Berger, L. Jocou, P. Labeye, F. Malbet, K. Perraut, P. Kern

Abstract: The very recent years have seen a promising start in scientific publications making use of images produced by near-infrared long-baseline interferometry. The technique has reached, at last, a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. The Very Large Telescope Interferometer (VLTI) is on the path to be equ… ▽ More The very recent years have seen a promising start in scientific publications making use of images produced by near-infrared long-baseline interferometry. The technique has reached, at last, a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. The Very Large Telescope Interferometer (VLTI) is on the path to be equipped with instruments capable to combine between four to six telescopes. In the framework of the VLTI second generation instruments Gravity and VSI, we propose a new beam combining concept using Integrated Optics (IO) technologies with a novel ABCD-like fringe encoding scheme. Our goal is to demonstrate that IO-based combination brings considerable advantages in terms of instrumental design and performance. We therefore aim at giving a full characterization of an IO beam combiner to establish its performances and check its compliance with the specifications of an imaging instrument. Laboratory measurements were made in the H band with a dedicated testbed. We studied the beam combiners through the analysis of throughput, instrumental visibilities, phases and closure phases in wide band as well as with spectral dispersion. Study of the polarization properties is also done. We obtain competitive throughput, high and stable instrumental contrasts, stable but non-zero closure phases which we attribute to internal well calibrable optical path differences. We validate a new static and achromatic phase shifting IO function close to the nominal 90deg value. All these observables show limited chromaticity over the H band range. Our results demonstrate that such ABCD-like beam combiners are particularly well suited to achieve aperture synthesis imaging. This opens the way to extend to all near infrared wavelengths and in particular, the K band. △ Less

Submitted 2 March, 2009; v1 submitted 14 February, 2009; originally announced February 2009.

Comments: 13 pages, 11 figures, 13 tables; Accepted by A&A

On-chip spectro-detection for fully integrated coherent beam combiners

Authors: Pierre Kern, Etienne Le Coärer, Pierre Benech

Abstract: This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection princip… ▽ More This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection principle aimed at directly sampling and extracting the spectral information of an input signal together with its flux level measurement. The so-called SWIFTS demonstrated concept that stands for Stationary-Wave Integrated Fourier Transform Spectrometer, provides full spectral and spatial information recorded simultaneously thanks to a motionless detecting device. Due to some newly available detection principles considered for the implementation of the SWIFTS concept, some technologies can even provide photo-counting operation that brought a significant extension of the interferometry domain of investigation in astrophysics . The proposed concept is applicable to most of the interferometric instrumental modes including fringe tracking, fast and sensitive detection, Fourier spectral reconstruction and also to manage a large number of incoming beams. The paper presents three practical implementations, two dealing with pair-wise integrated optics beam combinations and the third one with an all-in-one 8 beam combination. In all cases the principles turned into a pair wise baseline coding after proper data processing. △ Less

Submitted 10 February, 2009; originally announced February 2009.

Comments: 12 pages, 6 figures, part of the Optics Express special issue dedicated to Astrophotonics

Journal ref: Opt.Express 17:1976-1987,2009

Astrophotonics: a new era for astronomical instruments

Authors: J. Bland-Hawthorn, Pierre Kern

Abstract: Astrophotonics lies at the interface of astronomy and photonics. This burgeoning field -- now formally recognized by the optics community -- has emerged over the past decade in response to the increasing demands of astronomical instrumentation. Early successes include: (i) planar waveguides to combine signals from widely spaced telescopes in stellar interferometry; (ii) frequency combs for ultra… ▽ More Astrophotonics lies at the interface of astronomy and photonics. This burgeoning field -- now formally recognized by the optics community -- has emerged over the past decade in response to the increasing demands of astronomical instrumentation. Early successes include: (i) planar waveguides to combine signals from widely spaced telescopes in stellar interferometry; (ii) frequency combs for ultra-high precision spectroscopy to detect planets around nearby stars; (iii) ultra-broadband fibre Bragg gratings to suppress unwanted background; (iv) photonic lanterns that allow single-mode behaviour within a multimode fibre; (v) planar waveguides to miniaturize astronomical spectrographs; (vi) large mode area fibres to generate artificial stars in the upper atmosphere for adaptive optics correction; (vii) liquid crystal polymers in optical vortex coronographs and adaptive optics systems. Astrophotonics, a field that has already created new photonic capabilities, is now extending its reach down to the Rayleigh scattering limit at ultraviolet wavelengths, and out to mid infrared wavelengths beyond 2500nm. △ Less

Submitted 2 February, 2009; originally announced February 2009.

Comments: 5 pages, Editorial for the Focus Issue on Astrophotonics (Optics Express); all 12 papers are free to air at http://www.opticsinfobase.org/oe/Issue.cfm

Journal ref: Opt.Express 17:1880,2009

Characterization of integrated optics components for the second generation of VLTI instruments

Authors: S. Lacour, L. Jocou, T. Moulin, P. R. Labeye, M. Benisty, J. -P. Berger, A. Delboulbe, X. Haubois, E. Herwats, P. Y. Kern, F. Malbet, K. Rousselet-Perraut, G. Perrin

Abstract: Two of the three instruments proposed to ESO for the second generation instrumentation of the VLTI would use integrated optics for beam combination. Several design are studied, including co-axial and multi-axial recombination. An extensive quantity of combiners are therefore under test in our laboratories. We will present the various components, and the method used to validate and compare the di… ▽ More Two of the three instruments proposed to ESO for the second generation instrumentation of the VLTI would use integrated optics for beam combination. Several design are studied, including co-axial and multi-axial recombination. An extensive quantity of combiners are therefore under test in our laboratories. We will present the various components, and the method used to validate and compare the different combiners. Finally, we will discuss the performances and their implication for both VSI and Gravity VLTI instruments. △ Less

Submitted 10 August, 2008; originally announced August 2008.

Comments: SPIE Astronomical Instrumentation 2008 in Marseille, France -- Equation (7) updated

AMBER Task Force February 2008 run report

Authors: F. Malbet, G. Duvert, A. Chelli, P. Kern

Abstract: AMBER was installed in March 2004 in the VLTI focal lab of the VLT observatory in Cerro Paranal run by ESO. Since then, there have been 4 commissioning runs and additional VLTI infrastructure installed (IRIS, FINITO and ATs,...), but AMBER is not yet fulfilling all its initial specifications and some important primary science objectives cannot be achieved. At the consortium level, an action plan… ▽ More AMBER was installed in March 2004 in the VLTI focal lab of the VLT observatory in Cerro Paranal run by ESO. Since then, there have been 4 commissioning runs and additional VLTI infrastructure installed (IRIS, FINITO and ATs,...), but AMBER is not yet fulfilling all its initial specifications and some important primary science objectives cannot be achieved. At the consortium level, an action plan has been decided in Oct 2007 that created an AMBER Task Force (ATF) to understand and possibly cure the eventual technical issues. The objectives of the February 2008 run was mainly to bring AMBER into contractual specifications the accuracy of the absolute visibility, of the differential and of the closure phase through a fundamental analysis of the instrument status and limitations. This report is the official report of the AMBER Task Force. △ Less

Submitted 8 August, 2008; originally announced August 2008.

Comments: 56 pages

Report number: ESO Doc No. VLT-TRE-AMB-15830-7120, issue 1.2, dated 16/04/2008

Optical configuration and analysis of the AMBER/VLTI instrument

Authors: S. Robbe-Dubois, S. Lagarde, R. G. Petrov, F. Lisi, U. Beckmann, P. Antonelli, Y. Bresson, G. Martinot-Lagarde, A. Roussel, P. Salinari, M. Vannier, A. Chelli, M. Dugue, G. Duvert, S. Gennari, L. Gluck, P. Kern, E. LeCoarer, F. Malbet, F. Millour, K. Perraut, P. Puget, F. Rantakyro, E. Tatulli, G. Weigelt , et al. (1 additional authors not shown)

Abstract: This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the i… ▽ More This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics. The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute. △ Less

Submitted 23 July, 2008; originally announced July 2008.

Comments: 14 pages

Journal ref: Astron.Astrophys.464:13-27,2007

System overview of the VLTI Spectro-Imager

Authors: L. Jocou, J. P. Berger, F. Malbet, P. Kern, U. Beckmann, D. Lorenzetti, L. Corcione, G. Li Causi, D. Buscher, J. Young, M. Gai, G. Weigelt, G. Zins, G. Duvert, K. Perraut, P. Labeye, O. Absil, P. Garcia, D. Loreggia, J. Lima, J. Rebordao, S. Ligori, A. Amorim, P. Rabou, J. B. Le Bouquin , et al. (8 additional authors not shown)

Abstract: The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolutio… ▽ More The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described. △ Less

Submitted 22 July, 2008; originally announced July 2008.

Near-IR Spectrograph for VSI (VLTI Spectro Imager): dispersing the light from an integrated optics beam-combiner

Authors: D. Lorenzetti, G. Li Causi, R. Speziali, F. Vitali, D. Loreggia, C. Baffa, P. Kern, L. Jocou, F. Malbet, P. Rabou

Abstract: We present the optical and cryo-mechanical solutions for the Spectrograph of VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K bands) interferometric instrument for the VLTI. The peculiarity of this spectrograph is represented by the Integrated Optics (IO) beam-combiner, a small and delicate component which is located inside the cryostat and makes VSI capable to coherent… ▽ More We present the optical and cryo-mechanical solutions for the Spectrograph of VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K bands) interferometric instrument for the VLTI. The peculiarity of this spectrograph is represented by the Integrated Optics (IO) beam-combiner, a small and delicate component which is located inside the cryostat and makes VSI capable to coherently combine 4, 6 or even 8 telescopes. The optics have been specifically designed to match the IO combiner output with the IR detector still preserving the needed spatial and spectral sampling, as well as the required fringe spacing. A compact device that allows us to interchange spectral resolutions (from R=200 to R=12000), is also presented. △ Less

Submitted 10 July, 2008; originally announced July 2008.

Comments: 12 pages, 11 figures, SPIE Conference - Marseille 2008

VSI: the VLTI spectro-imager

Authors: F. Malbet, D. Buscher, G. Weigelt, P. Garcia, M. Gai, D. Lorenzetti, J. Surdej, J. Hron, R. Neuhaeuser, P. Kern, L. Jocou, J. -P. Berger, O. Absil, U. Beckmann, L. Corcione, G. Duvert, M. Filho, P. Labeye, E. Le Coarer, G. Li Causi, J. Lima, K. Perraut, E. Tatulli, E. Thiebaut, J. Young , et al. (29 additional authors not shown)

Abstract: The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combinat… ▽ More The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return. △ Less

Submitted 7 July, 2008; originally announced July 2008.

Comments: 12 pages, to be published in Proc. SPIE conference 7013 "Optical and Infrared Interferometry", Schoeller, Danchi, and Delplancke, F. (eds.). See also http://vsi.obs.ujf-grenoble.fr

Milli-arcsecond astrophysics with VSI, the VLTI spectro-imager in the ELT era

Authors: F. Malbet, D. Buscher, G. Weigelt, P. Garcia, M. Gai, D. Lorenzetti, J. Surdej, J. Hron, R. Neuhäuser, P. Kern, L. Jocou, J. -P. Berger, O. Absil, U. Beckmann, L. Corcione, G. Duvert, M. Filho, P. Labeye, E. Le Coarer, G. Li Causi, J. Lima, K. Perraut, E. Tatulli, E. Thiébaut, J. Young , et al. (27 additional authors not shown)

Abstract: Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and sp… ▽ More Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes. △ Less

Submitted 17 January, 2008; originally announced January 2008.

Comments: 8 pages. To be published in the proceedings of the ESO workshop "Science with the VLT in the ELT Era", held in Garching (Germany) on 8-12 October 2007, A. Moorwood editor

Transmission behaviors of single mode hollow metallic waveguides dedicated to mid-infrared nulling interferometry

Authors: Laetitia Abel-Tiberini, Lucas Labadie, Brahim Arezki, Pierre Kern, Romain Grille, Pierre Labeye, Jean-Emmanuel Broquin

Abstract: This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect abs… ▽ More This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect absorption in addition to the roughness of the waveguide metallic walls. The input and output coupling efficiency of our samples has been improved by adding tapers to minimize the impedance mismatch. A proper distinction between propagation losses and coupling losses is presented. Despite their elevate propagation losses, HMW show excellent spatial filtering capabilities in a spectral range where photonics technologies are only emerging. △ Less

Submitted 15 January, 2008; originally announced January 2008.

Comments: This paper was published in Optics Express and can be found at http://www.opticsinfobase.org/abstract.cfm?URI=oe-15-26-18005

Technology challenges for space interferometry: the option of mid-infrared integrated optics

Authors: L. Labadie, P. Kern, P. Labeye, E. Le Coarer, C. Vigreux-Bercovici, A. Pradel, J. -E. Broquin, V. Kirschner

Abstract: Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these mis… ▽ More Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these missions, the question of the beam combination and wavefront filtering has an important place. A single-mode integrated optics (IO) beam combiner could support both the functions of filtering and the interferometric combination, simplifying the instrumental design. Such a perspective has been explored in this work within the project Integrated Optics for Darwin (IODA), which aims at developing a first IO combiner in the mid-infrared. The solutions reviewed here to manufacture the combiner are based on infrared dielectric materials on one side, and on metallic conductive waveguides on the other side. With this work, additional inputs are offered to pursue the investigation on mid-infrared photonics devices. △ Less

Submitted 11 July, 2007; originally announced July 2007.

Comments: Accepted in Adv. in Space Research

Journal ref: Adv.Space Res.41:1975-1982,2008

Mid-infrared laser light nulling experiment using single-mode conductive waveguides

Authors: L. Labadie, E. Le Coarer, R. Maurand, P. Labeye, P. Kern, B. Arezki, J. -E. Broquin

Abstract: Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift u… ▽ More Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift using a translating mirror, dynamic and static measurements of the nulling ratio are performed in the two cases where modal filtering is implemented and suppressed. No additional active control of the wavefront errors is involved. Results: We achieve on average a statistical nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null of 5.6e-5 is obtained in static mode. At the moment, the impact of external vibrations limits our ability to maintain the null to 10 to 20 seconds.; Conclusions: A positive effect of SM conductive waveguide on modal filtering has been observed in this study. Further improvement of the null should be possible with proper mechanical isolation of the setup. △ Less

Submitted 1 May, 2007; originally announced May 2007.

Comments: Accepted in A&A, 7 pages, 5 figures

Physical Orbit for Lambda Virginis and a Test of Stellar Evolution Models

Authors: M. Zhao, J. D. Monnier, G. Torres, A. F. Boden, A. Claret, R. Millan-Gabet, E. Pedretti, J. -P. Berger, W. A. Traub, F. P. Schloerb, N. P. Carleton, P. Kern, M. G. Lacasse, F. Malbet, K. Perraut

Abstract: Lambda Virginis (LamVir) is a well-known double-lined spectroscopic Am binary with the interesting property that both stars are very similar in abundance but one is sharp-lined and the other is broad-lined. We present combined interferometric and spectroscopic studies of LamVir. The small scale of the LamVir orbit (~20 mas) is well resolved by the Infrared Optical Telescope Array (IOTA), allowin… ▽ More Lambda Virginis (LamVir) is a well-known double-lined spectroscopic Am binary with the interesting property that both stars are very similar in abundance but one is sharp-lined and the other is broad-lined. We present combined interferometric and spectroscopic studies of LamVir. The small scale of the LamVir orbit (~20 mas) is well resolved by the Infrared Optical Telescope Array (IOTA), allowing us to determine its elements as well as the physical properties of the components to high accuracy. The masses of the two stars are determined to be 1.897 Msun and 1.721 Msun, with 0.7% and 1.5% errors respectively, and the two stars are found to have the same temperature of 8280 +/- 200 K. The accurately determined properties of LamVir allow comparisons between observations and current stellar evolution models, and reasonable matches are found. The best-fit stellar model gives LamVir a subsolar metallicity of Z=0.0097, and an age of 935 Myr. The orbital and physical parameters of LamVir also allow us to study its tidal evolution time scales and status. Although currently atomic diffusion is considered to be the most plausible cause of the Am phenomenon, the issue is still being actively debated in the literature. With the present study of the properties and evolutionary status of LamVir, this system is an ideal candidate for further detailed abundance analyses that might shed more light on the source of the chemical anomalies in these A stars. △ Less

Submitted 5 December, 2006; originally announced December 2006.

Comments: 43 Pages, 13 figures. Accepted for publication in ApJ

Journal ref: Astrophys.J.659:626-641,2007

Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations

Authors: F. Millour, R. G. Petrov, O. Chesneau, D. Bonneau, L. Dessart, C. Bechet, I. Tallon-Bosc, M. Tallon, E. Thiébaut, F. Vakili, F. Malbet, D. Mourard, G. Zins, A. Roussel, S. Robbe-Dubois, P. Puget, K. Perraut, F. Lisi, E. Le Coarer, S. Lagarde, P. Kern, L. Glück, G. Duvert, A. Chelli, Y. Bresson , et al. (73 additional authors not shown)

Abstract: In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret thes… ▽ More In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1&plusmn;0.9mas and 66&plusmn;15&deg; respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11&deg;. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc. △ Less

Submitted 31 October, 2006; originally announced October 2006.

M-lines characterization of selenide and telluride waveguides for mid-infrared interferometry

Authors: Lucas Labadie, Caroline Vigreux-Bercovici, Annie Pradel, Pierre Kern, Brahim Arezki, Jean-Emmanuel Broquin

Abstract: Nulling interferometry is an astronomical technique that combines equal wavefronts to achieve a deep rejection ratio of an on-axis star, and that could permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns. Similarly to what is done in the near-infrared, high frequencies spatial filtering of the incoming beams can be achieved using single-mode waveguides operating in the m… ▽ More Nulling interferometry is an astronomical technique that combines equal wavefronts to achieve a deep rejection ratio of an on-axis star, and that could permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns. Similarly to what is done in the near-infrared, high frequencies spatial filtering of the incoming beams can be achieved using single-mode waveguides operating in the mid-infrared. An appreciable reduction of the instrumental complexity is also possible using integrated optics (IO) devices in this spectral range. The relative lack of single-mode guided optics in the mid-infrared has motivated the present technological study to demonstrate the feasibility of dielectric waveguides functioning at longer wavelengths. We propose to use selenide and telluride components to pursue the development of more complex IO functions. △ Less

Submitted 9 August, 2006; originally announced August 2006.

Comments: accepted in OSA Optics Express, 11 pages, 4 figures

No Expanding Fireball: Resolving the Recurrent Nova RS Ophiuchi with Infrared Interferometry

Authors: J. D. Monnier, R. K. Barry, W. A. Traub, B. F. Lane, R. L. Akeson, S. Ragland, P. A. Schuller, H. Le Coroller, J. P. Berger, R. Millan-Gabet, E. Pedretti, F. P. Schloerb, C. Koresko, N. P. Carleton, M. G. Lacasse, P. Kern, F. Malbet, K. Perraut, M. J. Kuchner, M. W. Muterspaugh

Abstract: Following the recent outburst of the recurrent nova RS Oph on 2006 Feb 12, we measured its near-infrared size using the IOTA, Keck, and PTI Interferometers at multiple epochs. The characteristic size of ~3 milliarcseconds hardly changed over the first 60 days of the outburst, ruling out currently-popular models whereby the near-infrared emission arises from hot gas in the expanding shock. The em… ▽ More Following the recent outburst of the recurrent nova RS Oph on 2006 Feb 12, we measured its near-infrared size using the IOTA, Keck, and PTI Interferometers at multiple epochs. The characteristic size of ~3 milliarcseconds hardly changed over the first 60 days of the outburst, ruling out currently-popular models whereby the near-infrared emission arises from hot gas in the expanding shock. The emission was also found to be significantly asymmetric, evidenced by non-zero closure phases detected by IOTA. The physical interpretation of these data depend strongly on the adopted distance to RS Oph. Our data can be interpreted as the first direct detection of the underlying RS Oph binary, lending support to the recent ``reborn red giant'' models of Hachisu & Kato. However, this result hinges on an RS Oph distance of ~< 540 pc, in strong disagreement with the widely-adopted distance of ~1.6 kpc. At the farther distance, our observations imply instead the existence of a non-expanding, dense and ionized circumbinary gaseous disk or reservoir responsible for the bulk of the near-infrared emission. Longer-baseline infrared interferometry is uniquely suited to distinguish between these models and to ultimately determine the distance, binary orbit, and component masses for RS Oph, one of the closest-known (candidate) SNIa progenitor systems. △ Less

Submitted 17 July, 2006; originally announced July 2006.

Comments: Accepted by Astrophysical Journal Letters

Journal ref: Astrophys.J.647:L127-L130,2006

VSI: a milli-arcsec spectro-imager for the VLTI

Authors: Fabien Malbet, Pierre Kern, Jean-Philippe Berger, Laurent Jocou, Paulo Garcia, David Buscher, Karine Rousselet-Perraut, Gerd Weigelt, Mario Gai, Jean Surdej, Josef Hron, Ralph Neuhäuser, Etienne Le Coarer, Pierre Labeye, Jean-Baptiste Le Bouquin, Myriam Benisty, Emilie Herwats

Abstract: VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to… ▽ More VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A. △ Less

Submitted 13 July, 2006; originally announced July 2006.

Comments: 12 pages

Journal ref: Advances in Stellar Interferometry, États-Unis d'Amérique (2006)

First Surface-resolved Results with the IOTA Imaging Interferometer: Detection of Asymmetries in AGB stars

Authors: S. Ragland, W. A. Traub, J. -P. Berger, W. C. Danchi, J. D. Monnier, L. A. Willson, N. P. Carleton, M. G. Lacasse, R. Millan-Gabet, E. Pedretti, F. P. Schloerb, W. D. Cotton, C. H. Townes, M. Brewer, P. Haguenauer, P. Kern, P. Labeye, F. Malbet, D. Malin, M. Pearlman, K. Perraut, K. Souccar, G. Wallace

Abstract: We have measured non-zero closure phases for about 29% of our sample of 56 nearby Asymptotic Giant Branch (AGB) stars, using the 3-telescope Infrared Optical Telescope Array (IOTA) interferometer at near-infrared wavelengths (H band) and with angular resolutions in the range 5-10 milliarcseconds. These nonzero closure phases can only be generated by asymmetric brightness distributions of the tar… ▽ More We have measured non-zero closure phases for about 29% of our sample of 56 nearby Asymptotic Giant Branch (AGB) stars, using the 3-telescope Infrared Optical Telescope Array (IOTA) interferometer at near-infrared wavelengths (H band) and with angular resolutions in the range 5-10 milliarcseconds. These nonzero closure phases can only be generated by asymmetric brightness distributions of the target stars or their surroundings. We discuss how these results were obtained, and how they might be interpreted in terms of structures on or near the target stars. We also report measured angular sizes and hypothesize that most Mira stars would show detectable asymmetry if observed with adequate angular resolution. △ Less

Submitted 7 July, 2006; originally announced July 2006.

Comments: Accepted by ApJ

Journal ref: Astrophys.J.652:650-660,2006

Bright Localized Near-Infrared Emission at 1-4 AU in the AB Aurigae Disk Revealed by IOTA Closure Phases

Authors: R. Millan-Gabet, J. D. Monnier, J. -P. Berger, W. A. Traub, F. P. Schloerb, E. Pedretti, M. Benisty, N. P. Carleton, P. Haguenauer, P. Kern, P. Labeye, M. G. Lacasse, F. Malbet, K. Perraut, M. Pearlman, N. Thureau

Abstract: We report on the detection of localized off-center emission at 1-4 AU in the circumstellar environment of the young stellar object AB Aurigae. We used closure phase measurements in the near-infrared made at the long baseline interferometer IOTA, the first obtained on a young stellar object using this technique. When probing sub-AU scales, all closure phases are close to zero degrees, as expected… ▽ More We report on the detection of localized off-center emission at 1-4 AU in the circumstellar environment of the young stellar object AB Aurigae. We used closure phase measurements in the near-infrared made at the long baseline interferometer IOTA, the first obtained on a young stellar object using this technique. When probing sub-AU scales, all closure phases are close to zero degrees, as expected given the previously-determined size of the AB Aurigae inner dust disk. However, a clear closure phase signal of -3.5 +/- 0.5 degrees is detected on one triangle containing relatively short baselines, requiring a high degree of non-point symmetry from emission at larger (AU-sized) scales in the disk. We have not identified any alternative explanation for these closure phase results and demonstrate that a ``disk hot spot'' model can fit our data. We speculate that such asymmetric near-infrared emission detected might arise as a result of localized viscous heating due to a gravitational instability in the AB Aurigae disk, or to the presence of a close stellar companion or accreting sub-stellar object. △ Less

Submitted 2 June, 2006; originally announced June 2006.

Comments: Accepted by Astrophysical Journal Letters

Journal ref: Astrophys.J. 645 (2006) L77-L80

Few Skewed Disks Found in First Closure-Phase Survey of Herbig Ae/Be stars

Authors: J. D. Monnier, J. -P. Berger, R. Millan-Gabet, W. Traub, F. P. Schloerb, E. Pedretti, M. Benisty, N. P. Carleton, P. Haguenauer, P. Kern, P. Labeye, M. G. Lacasse, F. Malbet, K. Perraut, M. Pearlman, M. Zhao

Abstract: Using the 3-telescope IOTA interferometer on Mt. Hopkins, we report results from the first near-infrared (lambda=1.65 mu) closure-phase survey of Young Stellar Objects (YSOs). These closure phases allow us to unambiguously detect departures from centrosymmetry (i.e., skew) in the emission pattern from YSO disks on the scale of ~4 milliarcseconds, expected from generic ``flared disk'' models. Six… ▽ More Using the 3-telescope IOTA interferometer on Mt. Hopkins, we report results from the first near-infrared (lambda=1.65 mu) closure-phase survey of Young Stellar Objects (YSOs). These closure phases allow us to unambiguously detect departures from centrosymmetry (i.e., skew) in the emission pattern from YSO disks on the scale of ~4 milliarcseconds, expected from generic ``flared disk'' models. Six of fourteen targets showed small, yet statistically-significant, non-zero closure phases, with largest values from the young binary system MWC 361-A and the (pre-main sequence?) Be star HD 45677. Our observations are quite sensitive to the vertical structure of the inner disk and we confront the predictions of the ``puffed-up inner wall'' models of Dullemond, Dominik, and Natta (DDN). Our data support disks models with curved inner rims because the expected emission appear symmetrically-distributed around the star over a wide range of inclination angles. In contrast, our results are incompatible with the models possessing vertical inner walls because they predict extreme skewness (i.e., large closure phases) from the near-IR disk emission that is not seen in our data. In addition, we also present the discovery of mysterious H-band ``halos'' (~5-10% of light on scales 0.01-0.50 arcsec) around a few objects, a preliminary ``parametric imaging'' study for HD 45677, and the first astrometric orbit for the young binary MWC 361-A. △ Less

Submitted 2 June, 2006; originally announced June 2006.

Comments: Accepted for publication in Astrophysical Journal

Journal ref: Astrophys.J.647:444-463,2006

Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band

Authors: Jean-Baptiste Le Bouquin, Pierre Labeye, Fabien Malbet, Laurent Jocou, Fatemeh Zabihian, Karine Rousselet-Perraut, Jean-Philippe Berger, Alain Delboulbe, Pierre Kern, Andreas Glindemann, Markus Schoeller

Abstract: Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device a… ▽ More Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects. △ Less

Submitted 21 December, 2005; originally announced December 2005.

Modal Filtering for Nulling Interferometry-First Single-Mode Conductive Waveguides in the Mid-Infrared

Authors: L. Labadie, P. Labeye, P. Kern, I. Schanen, B. Arezki, J. -E. Broquin

Abstract: This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented he… ▽ More This paper presents the work achieved for the manufacturing and characterization of first single-mode waveguides to be used as modal filters for nulling interferometry in the mid-infrared range [4-20 um]. As very high dynamic range is mandatory for detection of Earth-like planets, modal filtering is one of the most stringent instrumental aspects. The hollow metallic waveguides (HMW) presented here are manufactured using micro-machining techniques. Single-mode behavior has been investigated in laboratory through a technique of polarization analysis while transmission features have been measured using flux relative comparison. The single-mode behavior have been assessed at lambda=10.6 um for rectangular waveguides with dimensions a=10 um and b<5.3 um with an accuracy of ~2.5 %. The tests have shown that a single-polarization state can be maintained in the waveguide. A comparison with results on multi-mode HMW is proposed. Excess losses of 2.4 dB (~ 58 % transmission) have been measured for a single-mode waveguide. In particular, the importance of coupling conditions into the waveguide is emphasized here. The goal of manufacturing and characterizing the first single-mode HMW for the mid-infrared has been achieved. This opens the road to the use of integrated optics for interferometry in the mentioned spectral range. △ Less

Submitted 10 November, 2005; originally announced November 2005.

Comments: 10 pages, 6 figures, accepted in A&A

First AMBER/VLTI observations of hot massive stars

Authors: R. G. Petrov, F. Millour, O. Chesneau, G. Weigelt, D. Bonneau, Ph. Stee, S. Kraus, D. Mourard, A. Meilland, F. Malbet, F. Lisi, P. Kern, U. Beckmann, S. Lagarde, S. Gennari, E. Lecoarer, Th. Driebe, M. Accardo, S. Robbe-Dubois, K. Ohnaka, S. Busoni, A. Roussel, G. Zins, J. Behrend, D. Ferruzi , et al. (23 additional authors not shown)

Abstract: AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstella… ▽ More AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae. △ Less

Submitted 8 September, 2005; originally announced September 2005.

Planar Integrated Optics and astronomical interferometry

Authors: Pierre Kern, Jean-Philippe Berger, Pierre Haguenauer, Fabien Malbet, Karine Perraut

Abstract: Integrated optics (IO) is an optical technology that allows to reproduce optical circuits on a planar substrate. Since 1996, we have investigated the potentiality of IO in the framework of astronomical single mode interferometry. We review in this paper the principles of IO, the requirements for interferometry and the corresponding solutions offered by IO, the results of component characterizati… ▽ More Integrated optics (IO) is an optical technology that allows to reproduce optical circuits on a planar substrate. Since 1996, we have investigated the potentiality of IO in the framework of astronomical single mode interferometry. We review in this paper the principles of IO, the requirements for interferometry and the corresponding solutions offered by IO, the results of component characterization and the possible fields of application. △ Less

Submitted 1 August, 2005; originally announced August 2005.

Comments: 16 pages

Journal ref: C.R.Acad.Sci.IV Phys.Astrophys. 1 (2001) 111-124

VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution

Authors: Fabien Malbet, Jean-Philippe Berger, Paulo Garcia, Pierre Kern, Karine Perraut, Myriam Benisty, Laurent Jocou, Emilie Herwats, Jean-Baptiste Lebouquin, Pierre Labeye, Etienne Le Coarer, Olivier Preis, Eric Tatulli, Eric Thiébaut

Abstract: The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide inter… ▽ More The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program. △ Less

Submitted 10 July, 2005; originally announced July 2005.

Comments: In "The Power of Optical/IR Interferometry: Recent Scientific Results and 2nd Generation VLTI Instrumentation", Allemagne (2005) in press

Infrared Imaging of Capella with the IOTA Closure Phase Interferometer

Authors: S. Kraus, F. P. Schloerb, W. A. Traub, N. P. Carleton, M. Lacasse, M. Pearlman, J. D. Monnier, R. Millan-Gabet, J. -P. Berger, P. Haguenauer, K. Perraut, P. Kern, F. Malbet, P. Labeye

Abstract: We present infrared aperture synthesis maps produced with the upgraded IOTA interferometer. Michelson interferograms on the close binary system Capella (Alpha Aur) were obtained in the H-band between 2002 November 12 and 16 using the IONIC3 beam combiner. With baselines of 15m < B < 38m, we were able to determine the relative position of the binary components with milliarcsecond (mas) precision… ▽ More We present infrared aperture synthesis maps produced with the upgraded IOTA interferometer. Michelson interferograms on the close binary system Capella (Alpha Aur) were obtained in the H-band between 2002 November 12 and 16 using the IONIC3 beam combiner. With baselines of 15m < B < 38m, we were able to determine the relative position of the binary components with milliarcsecond (mas) precision and to track their movement along the approx. 14 degree arc covered by our observation run. We briefly describe the algorithms used for visibility and closure phase estimation. Three different Hybrid Mapping and Bispectrum Fitting techniques were implemented within one software framework and used to reconstruct the source brightness distribution. By dividing our data into subsets, the system could be mapped at three epochs, revealing the motion of the stars. The precise position of the binary components was also determined with model fits, which in addition revealed I_Aa/I_Ab=1.49 +/- 0.10 and apparent stellar uniform-disk (UD) diameters of Theta_Aa=8.9 +/- 0.6 mas and Theta_Ab=5.8 +/- 0.8 mas. To improve the u, v-plane coverage, we compensated this orbital motion by applying a rotation-compensating coordinate transformation. The resulting model-independent map with a beam size of 5.4 x 2.6 mas allows the resolution of the stellar surfaces of the Capella giants themselves. △ Less

Submitted 21 April, 2005; originally announced April 2005.

Comments: Accepted by the Astronomical Journal (2005-03-21)

Journal ref: Astron.J.130:246-255,2005

LP 349-25: a new tight M8V binary

Authors: T. Forveille, J. -L. Beuzit, P. Delorme, D. Ségransan, X. Delfosse, G. Chauvin, T. Fusco, A. -M. Lagrange, M. Mayor, G. Montagnier, D. Mouillet, C. Perrier, S. Udry, J. Charton, P. Gigan, J. -M. Conan, P. Kern, G. Michet

Abstract: We present the discovery of a tight M8V binary, with a separation of only 1.2 astronomical units, obtained with the PUEO and NACO adaptive optics systems, respectively at the CFHT and VLT telescopes. The estimated period of LP 349-25 is approximately 5 years, and this makes it an excellent candidate for a precise mass measurement. We present the discovery of a tight M8V binary, with a separation of only 1.2 astronomical units, obtained with the PUEO and NACO adaptive optics systems, respectively at the CFHT and VLT telescopes. The estimated period of LP 349-25 is approximately 5 years, and this makes it an excellent candidate for a precise mass measurement. △ Less

Submitted 28 March, 2005; originally announced March 2005.

Comments: Accepted by Astronomy and Astrophysics Letters

First results with the IOTA3 imaging interferometer: The spectroscopic binaries lambda Vir and WR 140

Authors: J. D. Monnier, W. Traub, F. P. Schloerb, R. Millan-Gabet, J. -P. Berger, E. Pedretti, N. Carleton, S. Kraus, M. Lacasse, M. Brewer, S. Ragland, A. Ahearn, C. Coldwell, P. Haguenauer, P. Kern, P. Labeye, L. Lagny, F. Malbet, D. Malin, P. Maymounkov, S. Morel, C. Papaliolios, K. Perraut, M. Pearlman, I. Porro , et al. (4 additional authors not shown)

Abstract: We report the first spatially-resolved observations of the spectroscopic binaries lambda Vir and WR 140, which includes the debut of aperture-synthesis imaging with the upgraded three-telescope IOTA interferometer. Using IONIC-3, a new integrated optics beam combiner capable of precise closure phase measurement, short observations were sufficient to extract the angular separation and orientation… ▽ More We report the first spatially-resolved observations of the spectroscopic binaries lambda Vir and WR 140, which includes the debut of aperture-synthesis imaging with the upgraded three-telescope IOTA interferometer. Using IONIC-3, a new integrated optics beam combiner capable of precise closure phase measurement, short observations were sufficient to extract the angular separation and orientation of each binary system and the component brightness ratio. Most notably, the underlying binary in the prototypical colliding-wind source WR 140 (WC7 + O4/5) was found to have a separation of ~13 milli-arcseconds with a position angle consistent with the images of the 2001 dust shell ejection only if the Wolf-Rayet star is fainter than the O star at 1.65 microns. We also highlight lambda Vir whose peculiar stellar properties of the Am star components will permit direct testing of current theories of tidal evolution when the full orbit is determined. △ Less

Submitted 19 January, 2004; v1 submitted 14 January, 2004; originally announced January 2004.

Comments: To appear in ApJ Letters (13 pages, 2 tables, 3 figures)

Journal ref: Astrophys.J. 602 (2004) L57-L60