Showing 1–19 of 19 results for author: Lidorikis, E

Graphene-perovskite fibre photodetectors

Authors: S. Akhavan, A. Taheri Najafabadi, S. Mignuzzi, M. Abdi Jalebi, A. Ruocco, I. Paradisanos, O. Balci, Z. Andaji-Garmaroudi, I. Goykhman, L. G. Occhipinti, E. Lidorikis, S. D. Stranks, A. C. Ferrari

Abstract: The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepar… ▽ More The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepare fibre PDs combining rolled graphene layers and photoactive perovskites. Conductive fibres ($\sim$500$Ω$/cm) are made by rolling single layer graphene (SLG) around silica fibres, followed by deposition of a dielectric layer (Al$_{2}$O$_{3}$ and parylene C), another rolled SLG as channel, and perovskite as photoactive component. The resulting gate-tunable PDs have response time$\sim$5ms, with an external responsivity$\sim$22kA/W at 488nm for 1V bias. The external responsivity is two orders of magnitude higher and the response time one order of magnitude faster than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up to$\sim$80\% photocurrent is maintained. Washability tests show$\sim$72\% of initial photocurrent after 30 cycles, promising for wearable applications. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Monolayer WS$_2$ electro- and photo-luminescence enhancement by TFSI treatment

Authors: A. R. Cadore, B. L. T. Rosa, I. Paradisanos, S. Mignuzzi, D. De Fazio, E. M. Alexeev, J. E. Muench, G. Kakavelakis, S. M. Shinde, D. Yoon, S. Tongay, K. Watanabe, T. Taniguchi, E. Lidorikis, I. Goykhman, G. Soavi, A. C. Ferrari

Abstract: Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum… ▽ More Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum efficiency as low as$\sim$10$^{-4}$\%. Here, we show that the superacid bis-(triuoromethane)sulfonimide (TFSI) treatment of monolayer WS$_2$-LEDs boosts EL quantum efficiency by over one order of magnitude at room temperature. Non-treated devices emit light mainly from negatively charged excitons, while the emission in treated ones predominantly involves radiative recombination of neutral excitons. This paves the way to tunable and efficient LMH-LEDs △ Less

Submitted 2 May, 2023; originally announced May 2023.

Plasmonic antenna coupling to hyperbolic phonon-polaritons for sensitive and fast mid-infrared photodetection with graphene

Authors: Sebastián Castilla, Ioannis Vangelidis, Varun-Varma Pusapati, Jordan Goldstein, Marta Autore, Tetiana Slipchenko, Khannan Rajendran, Seyoon Kim, Kenji Watanabe, Takashi Taniguchi, Luis Martín-Moreno, Dirk Englund, Klaas-Jan Tielrooij, Rainer Hillenbrand, Elefterios Lidorikis, Frank H. L. Koppens

Abstract: Integrating and manipulating the nano-optoelectronic properties of Van der Waals heterostructures can enable unprecedented platforms for photodetection and sensing. The main challenge of infrared photodetectors is to funnel the light into a small nanoscale active area and efficiently convert it into an electrical signal. Here, we overcome all of those challenges in one device, by efficient couplin… ▽ More Integrating and manipulating the nano-optoelectronic properties of Van der Waals heterostructures can enable unprecedented platforms for photodetection and sensing. The main challenge of infrared photodetectors is to funnel the light into a small nanoscale active area and efficiently convert it into an electrical signal. Here, we overcome all of those challenges in one device, by efficient coupling of a plasmonic antenna to hyperbolic phonon-polaritons in hexagonal-BN to highly concentrate mid-infrared light into a graphene pn-junction. We balance the interplay of the absorption, electrical and thermal conductivity of graphene via the device geometry. This novel approach yields remarkable device performance featuring room temperature high sensitivity (NEP of 82 pW-per-square-root-Hz) and fast rise time of 17 nanoseconds (setup-limited), among others, hence achieving a combination currently not present in the state-of-the-art graphene and commercial mid-infrared detectors. We also develop a multiphysics model that shows excellent quantitative agreement with our experimental results and reveals the different contributions to our photoresponse, thus paving the way for further improvement of these types of photodetectors even beyond mid-infrared range. △ Less

Submitted 30 May, 2020; originally announced June 2020.

Journal ref: Nature Communications 2020

Fast and Sensitive Terahertz Detection Using an Antenna-Integrated Graphene pn Junction

Authors: Sebastián Castilla, Bernat Terrés, Marta Autore, Leonardo Viti, Jian Li, Alexey Y. Nikitin, Ioannis Vangelidis, Kenji Watanabe, Takashi Taniguchi, Elefterios Lidorikis, Miriam S. Vitiello, Rainer Hillenbrand, Klaas-Jan Tielrooij, Frank H. L. Koppens

Abstract: Although the detection of light at terahertz (THz) frequencies is important for a large range of applications, current detectors typically have several disadvantages in terms of sensitivity, speed, operating temperature, and spectral range. Here, we use graphene as a photoactive material to overcome all of these limitations in one device. We introduce a novel detector for terahertz radiation that… ▽ More Although the detection of light at terahertz (THz) frequencies is important for a large range of applications, current detectors typically have several disadvantages in terms of sensitivity, speed, operating temperature, and spectral range. Here, we use graphene as a photoactive material to overcome all of these limitations in one device. We introduce a novel detector for terahertz radiation that exploits the photothermoelectric (PTE) effect, based on a design that employs a dual-gated, dipolar antenna with a gap of 100 nm. This narrow-gap antenna simultaneously creates a pn junction in a graphene channel located above the antenna and strongly concentrates the incoming radiation at this pn junction, where the photoresponse is created. We demonstrate that this novel detector has an excellent sensitivity, with a noise-equivalent power of 80 pW-per-square-root-Hz at room temperature, a response time below 30 ns (setup-limited), a high dynamic range (linear power dependence over more than 3 orders of magnitude) and broadband operation (measured range 1.8-4.2 THz, antenna-limited), which fulfills a combination that is currently missing in the state-of-the-art detectors. Importantly, on the basis of the agreement we obtained between experiment, analytical model, and numerical simulations, we have reached a solid understanding of how the PTE effect gives rise to a THz-induced photoresponse, which is very valuable for further detector optimization. △ Less

Submitted 6 May, 2019; originally announced May 2019.

Comments: 26 pages, 3 main figures and 10 supplementary figures

Journal ref: Nano Letters 2019

Hot electrons modulation of third harmonic generation in graphene

Authors: G. Soavi, G. Wang, H. Rostami, A. Tomadin, O. Balci, I. Paradeisanos, E. A. A. Pogna, G. Cerullo, E. Lidorikis, M. Polini, A. C. Ferrari

Abstract: Hot electrons dominate the ultrafast ($\sim$fs-ps) optical and electronic properties of metals and semiconductors and they are exploited in a variety of applications including photovoltaics and photodetection. We perform power-dependent third harmonic generation measurements on gated single-layer graphene and detect a significant deviation from the cubic power-law expected for a third harmonic gen… ▽ More Hot electrons dominate the ultrafast ($\sim$fs-ps) optical and electronic properties of metals and semiconductors and they are exploited in a variety of applications including photovoltaics and photodetection. We perform power-dependent third harmonic generation measurements on gated single-layer graphene and detect a significant deviation from the cubic power-law expected for a third harmonic generation process. We assign this to the presence of hot electrons. Our results indicate that the performance of nonlinear photonics devices based on graphene, such as optical modulators and frequency converters, can be affected by changes in the electronic temperature, which might occur due to increase of absorbed optical power or Joule heating. △ Less

Submitted 3 March, 2019; originally announced March 2019.

Journal ref: ACS Photonics 6, 2841 (2019)

Surface-Enhanced Raman Spectroscopy of Graphene Integrated in Plasmonic Silicon Platforms with Three-Dimensional Nanotopography

Authors: Maria Kanidi, Alva Dagkli, Nikolaos Kelaidis, Dimitrios Palles, Sigiava Aminalragia-Giamini, Jose Marquez-Velasco, Alan Colli, Athanasios Dimoulas, Elefterios Lidorikis, Maria Kandyla, Efstratios I. Kamitsos

Abstract: Integrating graphene with plasmonic nanostructures results in multifunctional hybrid systems with enhanced performance for numerous applications. In this work, we take advantage of the remarkable mechanical properties of graphene to combine it with scalable 3D plasmonic nanostructured silicon substrates, which enhance the interaction of graphene with electromagnetic radiation. Large areas of femto… ▽ More Integrating graphene with plasmonic nanostructures results in multifunctional hybrid systems with enhanced performance for numerous applications. In this work, we take advantage of the remarkable mechanical properties of graphene to combine it with scalable 3D plasmonic nanostructured silicon substrates, which enhance the interaction of graphene with electromagnetic radiation. Large areas of femtosecond laser-structured arrays of silicon nanopillars, decorated with gold nanoparticles, are integrated with graphene, which conforms to the substrate nanotopography. We obtain Raman spectra at 488, 514, 633, and 785 nm excitation wavelengths, spanning the entire visible range. For all excitation wavelengths, the Raman signal of graphene is enhanced by 2-3 orders of magnitude, similarly to the highest enhancements measured to date, concerning surface-enhanced Raman Spectroscopy (SERS) of graphene on plasmonic substrates. Moreover, in contrast to traditional deposition and lithographic methods, the fabrication method employed here relies on single-step, maskless, cost-effective, rapid laser processing of silicon in water, amenable to large-scale fabrication. Finite-difference time-domain simulations elucidate the advantages of the 3D topography of the substrate. Conformation of graphene to the Au-decorated silicon nanopillars enables graphene to sample near fields from an increased number of nanoparticles. Due to synergistic effects with the nanopillars, different nanoparticles become more active for different wavelengths and locations on the pillars, providing broadband enhancement. Nanostructured plasmonic silicon is a promising platform for integration with graphene and other 2D materials, for next-generation applications of large-area hybrid nanomaterials in the fields of sensing, photonics, optoelectronics, and medical diagnostics. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Journal of Physical Chemistry C 123, 3076 (2019)

Vertically-Illuminated, Resonant-Cavity-Enhanced, Graphene-Silicon Schottky Photodetectors

Authors: M. Casalino, U. Sassi, I. Goykhman, A. Eiden, E. Lidorikis, S. Milana, D. De Fazio, F. Tomarchio, M. Iodice, G. Coppola, A. C. Ferrari

Abstract: We report vertically-illuminated, resonant cavity enhanced, graphene-Si Schottky photodetectors (PDs) operating at 1550nm. These exploit internal photoemission at the graphene-Si interface. To obtain spectral selectivity and enhance responsivity, the PDs are integrated with an optical cavity, resulting in multiple reflections at resonance, and enhanced absorption in graphene. Our devices have wave… ▽ More We report vertically-illuminated, resonant cavity enhanced, graphene-Si Schottky photodetectors (PDs) operating at 1550nm. These exploit internal photoemission at the graphene-Si interface. To obtain spectral selectivity and enhance responsivity, the PDs are integrated with an optical cavity, resulting in multiple reflections at resonance, and enhanced absorption in graphene. Our devices have wavelength-dependent photoresponse with external (internal) responsivity~20mA/W (0.25A/W). The spectral-selectivity may be further tuned by varying the cavity resonant wavelength. Our devices pave the way for developing high responsivity hybrid graphene-Si free-space illuminated PDs for free-space optical communications, coherence optical tomography and light-radars △ Less

Submitted 8 July, 2017; originally announced August 2017.

Journal ref: ACS Nano 11, 10955 (2017)

Graphene-based, mid-infrared, room-temperature pyroelectric bolometers with ultrahigh temperature coefficient of resistance

Authors: U. Sassi, R. Parret, S. Nanot, M. Bruna, S. Borini, S. Milana, D. De Fazio, Z. Zhuang, E. Lidorikis, F. H. L. Koppens, A. C. Ferrari, A. Colli

Abstract: Graphene is ideally suited for photonic and optoelectronic applications, with a variety of photodetectors (PDs) in the visible, near-infrared (NIR), and THz reported to date, as well as thermal detectors in the mid-infrared (MIR). Here, we present a room temperature-MIR-PD where the pyroelectric response of a LiNbO3 crystal is transduced with high gain (up to 200) into resistivity modulation for g… ▽ More Graphene is ideally suited for photonic and optoelectronic applications, with a variety of photodetectors (PDs) in the visible, near-infrared (NIR), and THz reported to date, as well as thermal detectors in the mid-infrared (MIR). Here, we present a room temperature-MIR-PD where the pyroelectric response of a LiNbO3 crystal is transduced with high gain (up to 200) into resistivity modulation for graphene, leading to a temperature coefficient of resistance up to 900%/K, two orders of magnitude higher than the state of the art, for a device area of 300x300um2. This is achieved by fabricating a floating metallic structure that concentrates the charge generated by the pyroelectric substrate on the top-gate capacitor of the graphene channel. This allows us to resolve temperature variations down to 15umK at 1 Hz, paving the way for a new generation of detectors for MIR imaging and spectroscopy △ Less

Submitted 1 August, 2016; originally announced August 2016.

Journal ref: Nature Communications 8, 14311 (2017)

Surface plasmon polariton graphene photodetectors

Authors: T. J. Echtermeyer, S. Milana, U. Sassi, A. Eiden, M. Wu, E. Lidorikis, A. C. Ferrari

Abstract: The combination of plasmonic nanoparticles and graphene enhances the responsivity and spectral selectivity of graphene-based photodetectors. However, the small area of the metal-graphene junction, where the induced electron-hole pairs separate, limits the photoactive region to sub-micron length scales. Here, we couple graphene with a plasmonic grating and exploit the resulting surface plasmon pola… ▽ More The combination of plasmonic nanoparticles and graphene enhances the responsivity and spectral selectivity of graphene-based photodetectors. However, the small area of the metal-graphene junction, where the induced electron-hole pairs separate, limits the photoactive region to sub-micron length scales. Here, we couple graphene with a plasmonic grating and exploit the resulting surface plasmon polaritons to deliver the collected photons to the junction region of a metal-graphene-metal photodetector. This results into a 400% enhancement of responsivity and a 1000% increase in photoactive length, combined with tunable spectral selectivity. The interference between surface plasmon polaritons and the incident wave introduces new functionalities, such as light flux attraction or repulsion from the contact edges, enabling the tailored design of the photodetector's spectral response. This architecture can also be used for surface plasmon bio-sensing with direct-electric- readout, eliminating the need of complicated optics. △ Less

Submitted 25 May, 2015; originally announced May 2015.

Journal ref: Nano Lett. 16, 8 (2016)

Highly Sensitive Gas and Temperature Sensor Based on Conductance Modulation in Graphene with Multiple Magnetic Barriers

Authors: Nojoon Myoung, Elefterios Lidorikis

Abstract: The electronic and transport properties of graphene modulated by magnetic barrier arrays are derived for finite temperature. Prominent conductance gaps, originating from quantum interference effects are found in the periodic array case. When a structural defect is inserted in the array, sharp defect modes of high conductance appear within the conductance gaps. These modes can be shifted by local d… ▽ More The electronic and transport properties of graphene modulated by magnetic barrier arrays are derived for finite temperature. Prominent conductance gaps, originating from quantum interference effects are found in the periodic array case. When a structural defect is inserted in the array, sharp defect modes of high conductance appear within the conductance gaps. These modes can be shifted by local doping in the defect region resulting into sensing of the chemical molecules that adhere on the graphene sheet. In general it is found that sensitivity is strongly dependent on temperature due to smoothing out of the defect-induced peaks and transport gaps. This temperature dependence, however, offers the added capability for sub-mK temperature sensing resolution, and thus an opportunity towards ultra-sensitive combined electrochemical-calorimetric sensing. △ Less

Submitted 29 April, 2015; originally announced April 2015.

Comments: 13 pages, 13 figures

Few-cycle pulses from a graphene mode-locked all-fiber laser

Authors: D. Purdie, D. Popa, V. J. Wittwer, Z. Jiang, G. Bonacchini, F. Torrisi, S. Milana, E. Lidorikis, A. C. Ferrari

Abstract: We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications requiring high temporal resolution. We combine a graphene mode-locked oscillator with an external compressor and achieve~29fs pulses with~52mW average power. This is a simple, low-cost, and robust setup, entirely fiber based, with no free-space optics, for applications requiring high temporal resolution. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Journal ref: Appl. Phys. Lett. 106, 253101 (2015)

Photo-thermoelectric and photoelectric contributions to light detection in metal-graphene-metal photodetectors

Authors: T. J. Echtermeyer, P. S. Nene, M. Trushin, R. V. Gorbachev, A. L. Eiden, S. Milana, Z. Sun, J. Schliemann, E. Lidorikis, K. S. Novoselov, A. C. Ferrari

Abstract: Graphene's high mobility and Fermi velocity, combined with its constant light absorption in the visible to far-infrared range, make it an ideal material to fabricate high-speed and ultra-broadband photodetectors. However, the precise mechanism of photodetection is still debated. Here, we report wavelength and polarization dependent measurements of metal-graphene-metal photodetectors. This allows u… ▽ More Graphene's high mobility and Fermi velocity, combined with its constant light absorption in the visible to far-infrared range, make it an ideal material to fabricate high-speed and ultra-broadband photodetectors. However, the precise mechanism of photodetection is still debated. Here, we report wavelength and polarization dependent measurements of metal-graphene-metal photodetectors. This allows us to quantify and control the relative contributions of both photo-thermo- and photoelectric effects, both contributing to the overall photoresponse. This paves the way for a more efficient photodetector design for ultra-fast operating speeds. △ Less

Submitted 6 February, 2014; originally announced February 2014.

Journal ref: Nano Lett. 14, 3733 (2014)

1.5 GHz Pulse Generation From a Monolithic Waveguide Laser With a Graphene-Film Saturable Output Coupler

Authors: R. Mary, S. J. Beecher, G. Brown, F. Torrisi, S. Milana, D. Popa, T. Hasan, Z. Sun, E. Lidorikis, S. Ohara, A. C. Ferrari, A. K. Kar

Abstract: We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW outp… ▽ More We fabricate a saturable absorber mirror by coating a graphene film on an output coupler mirror. This is then used to obtain Q-switched mode-locking from a diode pumped linear cavity waveguide laser inscribed in Ytterbium-doped Bismuthate Glass, with high slope and optical conversion efficiencies. The laser produces mode-locked pulses at 1039nm, with 1.5GHz repetition rate at an average 202mW output power. This performance is due to the combination of the graphene saturable absorber with the high quality laser glass. △ Less

Submitted 14 December, 2012; originally announced December 2012.

Journal ref: Optics Express 21, 7943 (2013)

Surface Enhanced Raman Spectroscopy of Graphene

Authors: F. Schedin, E. Lidorikis, A. Lombardo, V. G. Kravets, A. K. Geim, A. N. Grigorenko, K. S. Novoselov, A. C. Ferrari

Abstract: Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be… ▽ More Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be made virtually defect-free. We report SERS from graphene, by depositing arrays of Au particles of well defined dimensions on graphene/SiO$_2$(300nm)/Si. We detect significant enhancements at 633nm. To elucidate the physics of SERS, we develop a quantitative analytical and numerical theory. The 2d nature of graphene allows for a closed-form description of the Raman enhancement. This scales with the nanoparticle cross section, the fourth power of the Mie enhancement, and is inversely proportional to the tenth power of the separation between graphene and the nanoparticle. One consequence is that metallic nanodisks are an ideal embodiment for SERS in 2d. △ Less

Submitted 18 May, 2010; originally announced May 2010.

Journal ref: ACS Nano 4, 5617 (2010)

Rayleigh Imaging of Graphene and Graphene Layers

Authors: C. Casiraghi, A. Hartschuh, E. Lidorikis, H. Qian, H. Harutyunyan, T. Gokus, K. S. Novoselov, A. C. Ferrari

Abstract: We investigate graphene and graphene layers on different substrates by monochromatic and white-light confocal Rayleigh scattering microscopy. The image contrast depends sensitively on the dielectric properties of the sample as well as the substrate geometry and can be described quantitatively using the complex refractive index of bulk graphite. For few layers (<6) the monochromatic contrast incr… ▽ More We investigate graphene and graphene layers on different substrates by monochromatic and white-light confocal Rayleigh scattering microscopy. The image contrast depends sensitively on the dielectric properties of the sample as well as the substrate geometry and can be described quantitatively using the complex refractive index of bulk graphite. For few layers (<6) the monochromatic contrast increases linearly with thickness: the samples behave as a superposition of single sheets which act as independent two dimensional electron gases. Thus, Rayleigh imaging is a general, simple and quick tool to identify graphene layers, that is readily combined with Raman scattering, which provides structural identification. △ Less

Submitted 18 May, 2007; originally announced May 2007.

Comments: 8 pages, 9 figures

Journal ref: Nano Lett. 7, 2711 (2007)

Pulse driven switching in one-dimensional nonlinear photonic band gap materials: a numerical study

Authors: E. Lidorikis, C. M. Soukoulis

Abstract: We examine numerically the time-dependent properties of nonlinear bistable multilayer structures for constant wave illumination. We find that our system exhibits both steady-state and self-pulsing solutions. In the steady state regime, we examine the dynamics of driving the system between different transmission states by injecting pulses, and we find the optimal pulse parameters. We repeat this… ▽ More We examine numerically the time-dependent properties of nonlinear bistable multilayer structures for constant wave illumination. We find that our system exhibits both steady-state and self-pulsing solutions. In the steady state regime, we examine the dynamics of driving the system between different transmission states by injecting pulses, and we find the optimal pulse parameters. We repeat this work for the case of a linear periodic system with a nonlinear impurity layer. △ Less

Submitted 7 February, 2000; originally announced February 2000.

Comments: Accepted for publication in Phys. Rev. E

Gap deformation and classical wave localization in disordered two-dimensional photonic band gap materials

Authors: E. Lidorikis, M. M. Sigalas, C. M. Soukoulis, E. N. Economou

Abstract: By using two ab initio numerical methods we study the effects that disorder has on the spectral gaps and on wave localization in two-dimensional photonic band gap materials. We find that there are basically two different responses depending on the lattice realization (solid dielectric cylinders in air or vise versa), the wave polarization, and the particular form under which disorder is introduc… ▽ More By using two ab initio numerical methods we study the effects that disorder has on the spectral gaps and on wave localization in two-dimensional photonic band gap materials. We find that there are basically two different responses depending on the lattice realization (solid dielectric cylinders in air or vise versa), the wave polarization, and the particular form under which disorder is introduced. Two different pictures for the photonic states are employed, the ``nearly free'' photon and the ``strongly localized'' photon. These originate from the two different mechanisms responsible for the formation of the spectral gaps, ie. multiple scattering and single scatterer resonances, and they qualitatively explain our results. △ Less

Submitted 7 February, 2000; originally announced February 2000.

Comments: Accepted for publication in Phys. Rev. B

Tight-binding parameterization for photonic band gap materials

Authors: E. Lidorikis, M. M. Sigalas, C. M. Soukoulis, E. N. Economou

Abstract: The ideas of the linear combination of atomic orbitals (LCAO) method, well known from the study of electrons, is extended to the classical wave case. The Mie resonances of the isolated scatterer in the classical wave case, are analogous to the localized eigenstates in the electronic case. The matrix elements of the two-dimensional tight-binding (TB) Hamiltonian are obtained by fitting to ab init… ▽ More The ideas of the linear combination of atomic orbitals (LCAO) method, well known from the study of electrons, is extended to the classical wave case. The Mie resonances of the isolated scatterer in the classical wave case, are analogous to the localized eigenstates in the electronic case. The matrix elements of the two-dimensional tight-binding (TB) Hamiltonian are obtained by fitting to ab initio results. The transferability of the TB model is tested by reproducing accurately the band structure of different 2D lattices, with and without defects, thus proving that the obtained TB parameters can be used to study other properties of the photonic band gap materials. △ Less

Submitted 31 March, 1998; originally announced March 1998.

Comments: 4 pages, 3 postscript figures, sumbitted to Phys. rev. Lett

Optical Bistability in Colloidal Crystals

Authors: E. Lidorikis, Qiming Li, C. M. Soukoulis

Abstract: We present a one dimensional model for the nonlinear response of a colloidal crystal to intense light illumination along a high symmetry direction. The strong coupling between light and the colloidal lattice, via the electric gradient force acting upon the particles, induces a novel large optical nonlinearity. We obtain bistable behavior when the incident frequency is inside the stopband of the… ▽ More We present a one dimensional model for the nonlinear response of a colloidal crystal to intense light illumination along a high symmetry direction. The strong coupling between light and the colloidal lattice, via the electric gradient force acting upon the particles, induces a novel large optical nonlinearity. We obtain bistable behavior when the incident frequency is inside the stopband of the periodic structure, with decreasing switching intensity as the frequency increases. The transmission characteristics and the magnitude of the switching threshold intensity are also in good agreement with a recent experiment. △ Less

Submitted 9 April, 1997; originally announced April 1997.

Comments: 6 pages, 5 Postscript figures

Journal ref: Phys. Rev. E 55 (1997) 3613-3618