-
Bulk high-temperature superconductivity in the high-pressure tetragonal phase of bilayer La2PrNi2O7
Authors:
Ningning Wang,
Gang Wang,
Xiaoling Shen,
Jun Hou,
Jun Luo,
Xiaoping Ma,
Huaixin Yang,
Lifen Shi,
Jie Dou,
Jie Feng,
Jie Yang,
Yunqing Shi,
Zhian Ren,
Hanming Ma,
Pengtao Yang,
Ziyi Liu,
Yue Liu,
Hua Zhang,
Xiaoli Dong,
Yuxin Wang,
Kun Jiang,
Jiangping Hu,
Stuart Calder,
Jiaqiang Yan,
Jianping Sun
, et al. (4 additional authors not shown)
Abstract:
The Ruddlesden-Popper (R-P) bilayer nickelate, La3Ni2O7, was recently found to show signatures of high-temperature superconductivity (HTSC) at pressures above 14 GPa. Subsequent investigations achieved zero resistance in single- and poly-crystalline samples under hydrostatic pressure conditions. Yet, obvious diamagnetic signals, the other hallmark of superconductors, are still lacking owing to the…
▽ More
The Ruddlesden-Popper (R-P) bilayer nickelate, La3Ni2O7, was recently found to show signatures of high-temperature superconductivity (HTSC) at pressures above 14 GPa. Subsequent investigations achieved zero resistance in single- and poly-crystalline samples under hydrostatic pressure conditions. Yet, obvious diamagnetic signals, the other hallmark of superconductors, are still lacking owing to the filamentary nature with low superconducting volume fraction. The presence of a novel "1313" polymorph and competing R-P phases obscured proper identification of the phase for HTSC. Thus, achieving bulk HTSC and identifying the phase at play are the most prominent tasks at present. Here, we address these issues in the praseodymium (Pr)-doped La2PrNi2O7 polycrystalline samples. We find that the substitutions of Pr for La effectively inhibits the intergrowth of different R-P phases, resulting in nearly pure bilayer structure. For La2PrNi2O7, pressure-induced orthorhombic-to-tetragonal structural transition takes place at Pc ~ 11 GPa, above which HTSC emerges gradually upon further compression. The superconducting transition temperatures at 18-20 GPa reach Tconset = 82.5 K and Tczero = 60 K, which are the highest values among known nickelate superconductors. More importantly, bulk HTSC was testified by detecting clear diamagnetic signals below ~75 K corresponding to an estimated superconducting volume fraction ~ 57(5)% at 20 GPa. Our results not only resolve the existing controversies but also illuminate directions for exploring bulk HTSC in the bilayer nickelates.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Giant Second Harmonic Generation from Wafer-Scale Aligned Chiral Carbon Nanotubes
Authors:
Rui Xu,
Jacques Doumani,
Viktor Labuntsov,
Nina Hong,
Anna-Christina Samaha,
Weiran Tu,
Fuyang Tay,
Elizabeth Blackert,
Jiaming Luo,
Mario El Tahchi,
Weilu Gao,
Jun Lou,
Yohei Yomogida,
Kazuhiro Yanagi,
Riichiro Saito,
Vasili Perebeinos,
Andrey Baydin,
Junichiro Kono,
Hanyu Zhu
Abstract:
Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted…
▽ More
Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted strong second-order nonlinearities for chiral CNTs, but there has been no experimental verification due to the lack of macroscopically ordered assemblies of single-enantiomer chiral CNTs. Here for the first time, we report the synthesis of centimeter-scale films of densely packed and aligned single-enantiomer chiral CNTs that exhibit micro-fabrication compatibility. We observe giant second harmonic generation (SHG) emission from the chiral CNT film, which originates from the intrinsic chirality and inversion symmetry breaking of the atomic structure of chiral CNTs. The observed value of the dominant element of the second-order nonlinear optical susceptibility tensor reaches $1.5\times 10^{3}$ pm/V at a pump wavelength of 1030 nm, corresponding to the lowest-energy excitonic resonance. Our calculations based on many-body theory correctly estimate the spectrum and magnitude of such excitonically enhanced optical nonlinearity. These results are promising for developing scalable chiral-CNT electronics, nonlinear photonics and photonic quantum computing.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Discovering one molecule out of a million: inverse design of molecular hole transporting semiconductors tailored for perovskite solar cells
Authors:
Jianchang Wu,
Luca Torresi,
ManMan Hu,
Patrick Reiser,
Jiyun Zhang,
Juan S. Rocha-Ortiz,
Luyao Wang,
Zhiqiang Xie,
Kaicheng Zhang,
Byung-wook Park,
Anastasia Barabash,
Yicheng Zhao,
Junsheng Luo,
Yunuo Wang,
Larry Lüer,
Lin-Long Deng,
Jens A. Hauch,
Sang Il Seok,
Pascal Friederich,
Christoph J. Brabec
Abstract:
The inverse design of tailored organic molecules for specific optoelectronic devices of high complexity holds an enormous potential, but has not yet been realized1,2. The complexity and literally infinite diversity of conjugated molecular structures present both, an unprecedented opportunity for technological breakthroughs as well as an unseen optimization challenge. Current models rely on big dat…
▽ More
The inverse design of tailored organic molecules for specific optoelectronic devices of high complexity holds an enormous potential, but has not yet been realized1,2. The complexity and literally infinite diversity of conjugated molecular structures present both, an unprecedented opportunity for technological breakthroughs as well as an unseen optimization challenge. Current models rely on big data which do not exist for specialized research films. However, a hybrid computational and high throughput experimental screening workflow allowed us to train predictive models with as little as 149 molecules. We demonstrate a unique closed-loop workflow combining high throughput synthesis and Bayesian optimization that discovers new hole transporting materials with tailored properties for solar cell applications. A series of high-performance molecules were identified from minimal suggestions, achieving up to 26.23% (certified 25.88%) power conversion efficiency in perovskite solar cells. Our work paves the way for rapid, informed discovery in vast molecular libraries, revolutionizing material selection for complex devices. We believe that our approach can be generalized to other emerging fields and indeed accelerate the development of optoelectronic semiconductor devices in general.
△ Less
Submitted 30 June, 2024;
originally announced July 2024.
-
Screening of half-Heuslers with temperature-induced band convergence and enhanced thermoelectric properties
Authors:
Jinyang Xi,
Zirui Dong,
Menghan Gao,
Jun Luo,
Jiong Yang
Abstract:
Enhancing band convergence is an effective way to optimize the thermoelectric (TE) properties of materials. However, the temperature-induced band renormalization is commonly ignored. By employing the recently-developed electron-phonon renormalization (EPR) method, the nature of band renormalization in half-Heusler (HH) compounds TiCoSb and NbFeSb is revealed, and the key factors for temperature-in…
▽ More
Enhancing band convergence is an effective way to optimize the thermoelectric (TE) properties of materials. However, the temperature-induced band renormalization is commonly ignored. By employing the recently-developed electron-phonon renormalization (EPR) method, the nature of band renormalization in half-Heusler (HH) compounds TiCoSb and NbFeSb is revealed, and the key factors for temperature-induced conduction band convergence in HH are found out. Using these as the screening criteria, 3 out of 274 HHs (TiRhBi, TiPtSn, NbPtTl) are then stood out from our MatHub-3d database. Taking TiPtSn as the example, it shows the conduction band convergence at mid-high temperature, and further resulting in enhanced Seebeck coefficient S: e.g., at 600 K with electron concentration 10^20 cm^-3, the predicted S with and without renormalized band is 352.83 uV/K and 289.52 uV/K, respectively. Herein, the former is closer to our measurement value of 338.79 uV/K. Besides, the effective masses obtained from calculation and experiment are both enlarged with temperature, indicating the existence of band convergence. Our work demonstrates for the first time the significance of adding the temperature effect on electronic structure in the design of potential high-performance TE materials.
△ Less
Submitted 29 June, 2024;
originally announced July 2024.
-
Stabilizing Solution-Substrate Interaction of Perovskite Ink on PEDOT:PSS for Scalable Blade Coated Narrow Bandgap Perovskite Solar Modules by Gas Quenching
Authors:
Severin Siegrist,
Johnpaul K. Pious,
Huagui Lai,
Radha K. Kothandaraman,
Jincheng Luo,
Vitor Vlnieska,
Ayodhya N. Tiwari,
Fan Fu
Abstract:
The development of scalable 1.25 eV mixed Pb-Sn perovskite solar modules by blade coating lags behind Pb-based perovskites due to limited understanding of solution-substrate interaction of the perovskite ink on PEDOT:PSS and subsequent gas quenching. To address this challenge, we systematically studied the wet film deposition and quenching process to better understand narrow bandgap perovskite fil…
▽ More
The development of scalable 1.25 eV mixed Pb-Sn perovskite solar modules by blade coating lags behind Pb-based perovskites due to limited understanding of solution-substrate interaction of the perovskite ink on PEDOT:PSS and subsequent gas quenching. To address this challenge, we systematically studied the wet film deposition and quenching process to better understand narrow bandgap perovskite film formation on PEDOT:PSS. We found, the wetting of Pb-Sn perovskite ink on PEDOT:PSS is highly unstable over relevant coating time scales, causing the contact angles to decrease rapidly from 42° to 16° within seconds. This instability leads to localized irregularities in the wet film, resulting in uneven solvent extraction and inhomogeneous nuclei density. As a result, rough perovskite films with voids at the buried interface are obtained. To overcome this problem, we developed a quasi-static wetting process by reducing the blade coating speed, thereby stabilizing the wetting behavior of Pb-Sn perovskite precursor ink on PEDOT:PSS. This optimized process facilitates the deposition of high-quality, void-free Pb-Sn perovskite films with uniform thickness over 8 cm of coating length using moderate (1.4 bar) N2 quenching. We achieved 20 % efficient narrow bandgap perovskite solar cells and mini-modules with 15.8 % active area efficiency on 15.9 cm2.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Nonequilibrium carrier and phonon dynamics in the ferrimagnetic semiconductor Mn$_3$Si$_2$Te$_6$
Authors:
Y. Yang,
X. T. Chen,
Z. L. Li,
J. B. Pan,
F. Jing,
S. S. Zhang,
X. B. Wang,
J. L. Luo
Abstract:
We investigate the ultrafast carrier and phonon dynamics in the ferrimagnetic semiconductor Mn$_3$Si$_2$Te$_6$ using time-resolved optical pump-probe spectroscopy. Our results reveal that the electron-phonon thermalization process with a subpicosecond timescale is prolonged by the hot-phonon bottleneck effect. We identify the subsequent relaxation processes associated with two non-radiative recomb…
▽ More
We investigate the ultrafast carrier and phonon dynamics in the ferrimagnetic semiconductor Mn$_3$Si$_2$Te$_6$ using time-resolved optical pump-probe spectroscopy. Our results reveal that the electron-phonon thermalization process with a subpicosecond timescale is prolonged by the hot-phonon bottleneck effect. We identify the subsequent relaxation processes associated with two non-radiative recombination mechanisms, i.e., phonon-assisted electron-hole recombination and defect-related Shockley-Read-Hall recombination. Temperature-dependent measurements indicate that all three relaxation components show large variation around 175 and 78 K, which is related to the initiation of spin fluctuation and ferrimagnetic order in Mn$_3$Si$_2$Te$_6$. In addition, two pronounced coherent optical phonons are observed, in which the phonon with a frequency of 3.7 THz is attributed to the $A_{1g}$ mode of Te precipitates. Applying the strain pulse propagation model to the coherent acoustic phonons yields a penetration depth of 506 nm and a sound speed of 2.42 km/s in Mn$_3$Si$_2$Te$_6$. Our results develop understanding of the nonequilibrium properties of the ferrimagnetic semiconductor Mn$_3$Si$_2$Te$_6$, and also shed light on its potential applications in optoelectronic and spintronic devices.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Density-wave-like gap evolution in La$_3$Ni$_2$O$_7$ under high pressure revealed by ultrafast optical spectroscopy
Authors:
Yanghao Meng,
Yi Yang,
Hualei Sun,
Sasa Zhang,
Jianlin Luo,
Meng Wang,
Fang Hong,
Xinbo Wang,
Xiaohui Yu
Abstract:
We explore the quasiparticle dynamics in bilayer nickelate La$_3$Ni$_2$O$_7$ crystal using ultrafast optical pump-probe spectroscopy at high pressure up to 34.2 GPa. At ambient pressure, the temperature dependence of relaxation indicates appearance of phonon bottleneck effect due to the opening of density-wave-like gap at 151 K. By analyzing the data with RT model, we identified the energy scale o…
▽ More
We explore the quasiparticle dynamics in bilayer nickelate La$_3$Ni$_2$O$_7$ crystal using ultrafast optical pump-probe spectroscopy at high pressure up to 34.2 GPa. At ambient pressure, the temperature dependence of relaxation indicates appearance of phonon bottleneck effect due to the opening of density-wave-like gap at 151 K. By analyzing the data with RT model, we identified the energy scale of the gap to be 70 meV at ambient pressure. The relaxation bottleneck effect is suppressed gradually by the pressure and disappears around 26 GPa. At high pressure above 29.4 GPa, we discover a new density-wave like order with transition temperature of $\sim$130 K. Our results not only provide the first experimental evidence of the density-wave like gap evolution under high pressure, but also offering insight into the underline interplay between the density wave order and superconductivity in pressured La$_3$Ni$_2$O$_7$.
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Tuning exciton emission via ferroelectric polarization at a heterogeneous interface between a monolayer transition metal dichalcogenide and a perovskite oxide membrane
Authors:
Jaehong Choi,
Kevin J. Crust,
Lizhong Li,
Kihong Lee,
Jialun Luo,
Jae-Pil So,
Kenji Watanabe,
Takashi Taniguchi,
Harold Y. Hwang,
Kin Fai Mak,
Jie Shan,
Gregory D. Fuchs
Abstract:
We demonstrate the integration of a thin BaTiO$_3$ (BTO) membrane with monolayer MoSe$_2$ in a dual gate device that enables in-situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D mate…
▽ More
We demonstrate the integration of a thin BaTiO$_3$ (BTO) membrane with monolayer MoSe$_2$ in a dual gate device that enables in-situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe$_2$ excitons to optically readout the doping level, we find that the relative population of charge carriers in MoSe$_2$ depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generations versatile sensing devices with high sensitivity, fast read-out, and diverse applicability for advanced signal processing.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
The photoinduced hidden metallic phase of monoclinic VO2 driven by local nucleation via a self-amplification process
Authors:
Feng-Wu Guo,
Wen-Hao Liu,
Zhi Wang,
Shu-Shen Li,
Lin-Wang Wang,
Jun-Wei Luo
Abstract:
The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) has garnered extensive attention for its potential applications in ultrafast switches, neuronal network architectures, and storage technologies. However, a significant controversy persists regarding the formation of the IMT, specifically concerning whether a complete structural phase transition from monoclinic (M1) to rutile (R) pha…
▽ More
The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) has garnered extensive attention for its potential applications in ultrafast switches, neuronal network architectures, and storage technologies. However, a significant controversy persists regarding the formation of the IMT, specifically concerning whether a complete structural phase transition from monoclinic (M1) to rutile (R) phase is necessary. Here we employ the real-time time-dependent density functional theory (rt-TDDFT) to track the dynamic evolution of atomic and electronic structures in photoexcited VO2, revealing the emergence of a long-lived monoclinic metal phase (MM) under low electronic excitation. The emergence of the metal phase in the monoclinic structure originates from the dissociation of the local V-V dimer, driven by the self-trapped and self-amplified dynamics of photoexcited holes, rather than by a pure electron-electron correction. On the other hand, the M1-to-R phase transition does appear at higher electronic excitation. Our findings validate the existence of MM phase and provide a comprehensive picture of the IMT in photoexcited VO2.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
A Machine Learning Framework for the Prediction of Grain Boundary Segregation in Chemically Complex Environments
Authors:
Doruk Aksoy,
Jian Luo,
Penghui Cao,
Timothy J. Rupert
Abstract:
The discovery of complex concentrated alloys has unveiled materials with diverse atomic environments, prompting the exploration of solute segregation beyond dilute alloys. Data-driven methods offer promising for modeling segregation in such chemically complex environments, and are employed in this study to understand segregation behavior of a refractory complex concentrated alloy, NbMoTaW. A flexi…
▽ More
The discovery of complex concentrated alloys has unveiled materials with diverse atomic environments, prompting the exploration of solute segregation beyond dilute alloys. Data-driven methods offer promising for modeling segregation in such chemically complex environments, and are employed in this study to understand segregation behavior of a refractory complex concentrated alloy, NbMoTaW. A flexible methodology is developed that uses composable computational modules, with different arrangements of these modules employed to obtain site availabilities at absolute zero and the corresponding density of states beyond the dilute limit, resulting in an extremely large dataset containing 10 million data points. The artificial neural network developed here can rely solely on descriptions of local atomic environments to predict behavior at the dilute limit with very small errors, while the addition of negative segregation instance classification allows any solute concentration from zero up to the equiatomic concentration for ternary or quaternary alloys to be modeled at room temperature. The machine learning model thus achieves a significant speed advantage over traditional atomistic simulations, being four orders of magnitude faster, while only experiencing a minimal reduction in accuracy. This efficiency presents a powerful tool for rapid microstructural and interfacial design in unseen domains. Scientifically, our approach reveals a transition in the segregation behavior of Mo from unfavorable in simple systems to favorable in complex environments. Additionally, increasing solute concentration was observed to cause anti-segregation sites to begin to fill, challenging conventional understanding and highlighting the complexity of segregation dynamics in chemically complex environments.
△ Less
Submitted 10 June, 2024; v1 submitted 9 April, 2024;
originally announced April 2024.
-
Spin-resolved counting statistics as a sensitive probe of spin correlation in transport through a quantum dot spin valve
Authors:
Guanjian Hu,
Shikuan Wang,
Jing Hu,
RuiQiang Li,
Yiying Yan,
JunYan Luo
Abstract:
We investigate the noise in spin transport through a single quantum dot (QD) tunnel coupled to ferromagnetic electrodes with noncollinear magnetizations. Based on a spin-resolved quantum master equation, auto- and cross-correlations of spin-resolved currents are analyzed to reveal the underlying spin transport dynamics and characteristics for various polarizations. We find the currents of majority…
▽ More
We investigate the noise in spin transport through a single quantum dot (QD) tunnel coupled to ferromagnetic electrodes with noncollinear magnetizations. Based on a spin-resolved quantum master equation, auto- and cross-correlations of spin-resolved currents are analyzed to reveal the underlying spin transport dynamics and characteristics for various polarizations. We find the currents of majority and minority spins could be strongly autocorrelated despite uncorrelated charge transfer. The interplay between tunnel coupling and the Coulomb interaction gives rise to an exchange magnetic field, leading to the precession of the accumulated spin in the QD. It strongly suppresses the bunching of spin tunneling events and results in a unique double-peak structure in the noise of the net spin current. The spin autocorrelation is found to be susceptible to magnetization alignments, which may serve as a sensitive tool to measure the magnetization directions between the ferromagnetic electrodes.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Pressure tuning of hydrogen bond ordering in the metal-organic framework [(CH3)2NH2]Mn(HCOO)3
Authors:
Na Su,
Yinina Ma,
Shuang Liu,
Wei Wu,
Jianlin Luo,
Young Sun
Abstract:
The influence of pressure on the hydrogen bond ordering in the perovskite metal-organic framework [(CH3)2NH2]Mn(HCOO)3 has been investigated by dielectric, pyroelectric adn magnetic measurements in a piston-cylinder cell. Under ambient pressure the ordering of hydrogen bonds takes place at TC = 188 K and induces a first-order ferroelectric phase transition. With increasing pressure to p = 3.92 kba…
▽ More
The influence of pressure on the hydrogen bond ordering in the perovskite metal-organic framework [(CH3)2NH2]Mn(HCOO)3 has been investigated by dielectric, pyroelectric adn magnetic measurements in a piston-cylinder cell. Under ambient pressure the ordering of hydrogen bonds takes place at TC = 188 K and induces a first-order ferroelectric phase transition. With increasing pressure to p = 3.92 kbar, the order-disorder transition shifts to a lower temperature and retains the first-order ferroelectric nature. However, under higher pressures, the ordering process of hydrogen bonds is split into two transitions: a broad antiferroelectric transition at high temperature and a first-order ferroelectric transition at low temperature. With increasing pressure, the antiferroelectric phase is enhanced whereas the ferroelectric phase is greatly suppressed, which implies that compression of the perovskite framework favors antiparallel arrangement of the hydrogen bonds. The canted anti-ferromagnetic transition was almost unchanged when pressure up to 10.85 kbar. Our study demonstrated that the perovskite metal-organic frameworks are more sensitive to external pressure than conventional perovskite oxides so that their electric properties can be easily tuned by pressure.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Grain Boundary Segregation Models for High-Entropy Alloys: Theoretical Formulation and Derived Analytical Expressions to Elucidate High-Entropy Grain Boundaries
Authors:
Jian Luo
Abstract:
Grain boundary (GB) segregation models are derived for multi-principal element and high-entropy alloys (MPEAs and HEAs). Differing from classical models where one component is taken as solvent and others are considered solutes, these models are referenced to the bulk composition to enable improved treatments of MPEAs and HEAs with no principal components. An ideal solution model is first formulate…
▽ More
Grain boundary (GB) segregation models are derived for multi-principal element and high-entropy alloys (MPEAs and HEAs). Differing from classical models where one component is taken as solvent and others are considered solutes, these models are referenced to the bulk composition to enable improved treatments of MPEAs and HEAs with no principal components. An ideal solution model is first formulated and solved to obtain analytical expressions that predict GB segregation and GB energy in MPEAs and HEAs. A regular solution model is further derived. The GB composition calculated using the simple analytical expression derived in this study and data from the Materials Project agree well with a prior sphosipcated atomistic simulation for NbMoTaW. The simplicity of the derived analytical expressions makes them useful for not only conveniently predicting GB segregation trends in HEAs, but also analyzing nascent interfacial phenomena in composionally complex GBs. As an application example, the derived models are used to further formulate a set of useful equations to elucidate an emergent concept of high-entropy grain boundaries (HEGBs).
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Noncentrosymmetric Nowotny Chimney Ladder Ferromagnet Cr4Ge7 with a High Curie Temperature of ~ 207 K
Authors:
Zhenhai Yu,
Kaijuan Zhou,
Xiaofei Hou,
Xuejiao Chen,
Zhen Tao,
Yunguan Ye,
Wei Xia,
Zhongyang Li,
Jinggeng Zhao,
Wei Wu,
Ziyi Liu,
Xia Wang,
Na Yu,
Jinguang Cheng,
Jianlin Luo,
Qiang Zhang,
Vladimir Pomjakushin,
Zhicheng Zhong,
Soh Jian Rui,
Xingye Lu,
Yanfeng Guo
Abstract:
Noncentrosymmetric magnets usually host intriguing magnetic interactions inherent the crystal structure with broken inversion symmetry, which can give rise to rich magnetic behaviors. We report herein the high-pressure synthesis, crystal structure, magnetizations and magnetic structure of a so-called Nowotny chimney ladder compound Cr4Ge7. Our analysis on the powder neutron diffraction data revise…
▽ More
Noncentrosymmetric magnets usually host intriguing magnetic interactions inherent the crystal structure with broken inversion symmetry, which can give rise to rich magnetic behaviors. We report herein the high-pressure synthesis, crystal structure, magnetizations and magnetic structure of a so-called Nowotny chimney ladder compound Cr4Ge7. Our analysis on the powder neutron diffraction data revises the crystal structure as a noncentrosymmetric space group (P-4c2, No.116). It exhibits two magnetic orders within the temperature range of 2 - 400 K. The first order at ~ 207 K associated with a small magnetic moment of ~ 0.75 miuB is assigned to a commensurate ferromagnetic structure with a propagation vector k = (0, 0, 0). The weak itinerant ferromagnet nature should be caused by the complex Cr spin orders from different Wyckoff positions. The second order at ~ 18 K is assumed to arise from a competition between the Dzyaloshinskii-Moria and Heisenberg interactions. The results provide an excellent platform for study on intricate interactions between various magnetic exchanges as well as for the exploration of high temperature exotic magnetic properties which host potential applications in next-generation spintronics.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Metasurface spectrometers beyond resolution-sensitivity constraints
Authors:
Feng Tang,
Jingjun Wu,
Tom Albrow-Owen,
Hanxiao Cui,
Fujia Chen,
Yaqi Shi,
Lan Zou,
Jun Chen,
Xuhan Guo,
Yijun Sun,
Jikui Luo,
Bingfeng Ju,
Jing Huang,
Shuangli Liu,
Bo Li,
Liming Yang,
Eric Anthony Munro,
Wanguo Zheng,
Hannah J. Joyce,
Hongsheng Chen,
Lufeng Che,
Shurong Dong,
Tawfique Hasan,
Xin Ye,
Yihao Yang
, et al. (1 additional authors not shown)
Abstract:
Optical spectroscopy plays an essential role across scientific research and industry for non-contact materials analysis1-3, increasingly through in-situ or portable platforms4-6. However, when considering low-light-level applications, conventional spectrometer designs necessitate a compromise between their resolution and sensitivity7,8, especially as device and detector dimensions are scaled down.…
▽ More
Optical spectroscopy plays an essential role across scientific research and industry for non-contact materials analysis1-3, increasingly through in-situ or portable platforms4-6. However, when considering low-light-level applications, conventional spectrometer designs necessitate a compromise between their resolution and sensitivity7,8, especially as device and detector dimensions are scaled down. Here, we report on a miniaturizable spectrometer platform where light throughput onto the detector is instead enhanced as the resolution is increased. This planar, CMOS-compatible platform is based around metasurface encoders designed to exhibit photonic bound states in the continuum9, where operational range can be altered or extended simply through adjusting geometric parameters. This system can enhance photon collection efficiency by up to two orders of magnitude versus conventional designs; we demonstrate this sensitivity advantage through ultra-low-intensity fluorescent and astrophotonic spectroscopy. This work represents a step forward for the practical utility of spectrometers, affording a route to integrated, chip-based devices that maintain high resolution and SNR without requiring prohibitively long integration times.
△ Less
Submitted 1 March, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Optimal design of fast topological pumping
Authors:
Xianggui Ding,
Zongliang Du,
Jiachen Luo,
Hui Chen,
Zhenqun Guan,
Xu Guo
Abstract:
Utilizing synthetic dimensions generated by spatial or temporal modulation, topological pumping enables the exploration of higher-dimensional topological phenomena through lower-dimensional physical systems. In this letter, we propose a rational design paradigm of fast topological pumping based on 1D and 2D time-modulated discrete elastic lattices for the first time. Firstly, the realization of to…
▽ More
Utilizing synthetic dimensions generated by spatial or temporal modulation, topological pumping enables the exploration of higher-dimensional topological phenomena through lower-dimensional physical systems. In this letter, we propose a rational design paradigm of fast topological pumping based on 1D and 2D time-modulated discrete elastic lattices for the first time. Firstly, the realization of topological pumping is ensured by introducing quantitative indicators to drive a transition of the edge or corner state in the lattice spectrum. Meanwhile, with the help of limiting speed for adiabaticity to calculate the modulation time, a mathematical formulation of designing topological pumping with the fastest modulation speed is presented. By applying the proposed design paradigm, topological edge-bulk-edge and corner-bulk-corner energy transport are successfully achieved, with 11.2 and 4.0 times of improvement in modulation speed compared to classical pumping systems in the literature. In addition, applying to 1D and 2D space-modulated systems, the optimized modulation schemes can reduce the number of stacks to 5.3% and 26.8% of the classical systems while ensuring highly concentrated energy transport. This design paradigm is expected to be extended to the rational design of fast topological pumping in other physical fields.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Frustrated metastable-to-equilibrium grain boundary structural transition in NbMoTaW due to segregation and chemical complexity
Authors:
Ian Geiger,
Diran Apelian,
Xiaoqing Pan,
Penghui Cao,
Jian Luo,
Timothy J. Rupert
Abstract:
Grain boundary structural transitions can lead to significant changes in the properties and performance of materials. In multi-principal element alloys, understanding these transitions becomes complex due to phenomena such as local chemical ordering and multi-component segregation. Using atomistic simulations, we explore a metastable-to-equilibrium grain boundary structural transition in NbMoTaW.…
▽ More
Grain boundary structural transitions can lead to significant changes in the properties and performance of materials. In multi-principal element alloys, understanding these transitions becomes complex due to phenomena such as local chemical ordering and multi-component segregation. Using atomistic simulations, we explore a metastable-to-equilibrium grain boundary structural transition in NbMoTaW. The transition, characterized by structural disordering and reduced free volume, shows high sensitivity to its local chemical environment. Most notably, the transition temperature range of the alloy is more than twice that of a pure metal. Differences in composition between coexisting metastable and equilibrium structures highlight the change in local site availability due to structural relaxation. Further examination of grain boundaries with fixed chemical states at varying temperatures reveals that the amount of segregation significantly influences the onset temperature yet has minimal effect on the transition width. These insights underscore the profound effects of chemical complexity and ordering on grain boundary transitions in complex concentrated alloys, marking a meaningful advancement in our understanding of grain boundary behavior at the atomic level.
△ Less
Submitted 12 March, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
Rashba-splitting-induced topological flat band detected by anomalous resistance oscillations beyond the quantum limit in ZrTe$_5$
Authors:
Dong Xing,
Bingbing Tong,
Senyang Pan,
Zezhi Wang,
Jianlin Luo,
Jinglei Zhang,
Cheng-Long Zhang
Abstract:
Topological flat band, on which the kinetic energy of topological electrons is quenched, represents a platform for investigating the topological properties of correlated systems. Recent experimental studies on flattened electronic bands have mainly concentrated on 2-dimensional materials created by van der Waals heterostructure-based engineering. Here, we report the observation of a topological fl…
▽ More
Topological flat band, on which the kinetic energy of topological electrons is quenched, represents a platform for investigating the topological properties of correlated systems. Recent experimental studies on flattened electronic bands have mainly concentrated on 2-dimensional materials created by van der Waals heterostructure-based engineering. Here, we report the observation of a topological flat band formed by polar-distortion-assisted Rashba splitting in a 3-dimensional Dirac material ZrTe$_5$. The polar distortion and resulting Rashba splitting on the band are directly detected by torque magnetometry and the anomalous Hall effect, respectively. The local symmetry breaking further flattens the band, on which we observe resistance oscillations beyond the quantum limit. These oscillations follow the temperature dependence of the Lifshitz-Kosevich formula but are evenly distributed in B instead of 1/B in high magnetic fields. Furthermore, the cyclotron mass anomalously gets enhanced about 10$^2$ times at field ~20 T. These anomalous properties of oscillations originate from a topological flat band with quenched kinetic energy. The topological flat band, realized by polar-distortion-assisted Rashba splitting in the 3-dimensional Dirac system ZrTe$_5$, signifies an intrinsic platform without invoking moiré or order-stacking engineering, and also opens the door for studying topologically correlated phenomena beyond the dimensionality of two.
△ Less
Submitted 25 May, 2024; v1 submitted 22 November, 2023;
originally announced November 2023.
-
Magnetic ground states in kagome YCu$_3$(OH)$_6$[(Cl$_x$Br$_{1-x}$)$_{3-y}$(OH)$_{y}$]
Authors:
Aini Xu,
Qinxin Shen,
Bo Liu,
Zhenyuan Zeng,
Lankun Han,
Liqin Yan,
Jun Luo,
Jie Yang,
Rui Zhou,
Shiliang Li
Abstract:
Quantum spin liquids represent exotic states of spin systems characterized by long-range entanglement and emergent fractionalized quasiparticles. It is generally believed that disorder is hostile to quantum spin liquids. In our study, we investigated the magnetic properties of a kagome system, YCu$_3$(OH)$_6$[(Cl$_x$Br$_{1-x}$)$_{3-y}$(OH)$_{y}$]. Within this system, some of the hexagons exhibit a…
▽ More
Quantum spin liquids represent exotic states of spin systems characterized by long-range entanglement and emergent fractionalized quasiparticles. It is generally believed that disorder is hostile to quantum spin liquids. In our study, we investigated the magnetic properties of a kagome system, YCu$_3$(OH)$_6$[(Cl$_x$Br$_{1-x}$)$_{3-y}$(OH)$_{y}$]. Within this system, some of the hexagons exhibit alternate bonds along the Cu-O-Cu exchange paths, while others remain uniform. We found that a long-range antiferromagnetic order emerges when uniform hexagons dominate. Conversely, possible quantum-spin-liquid state arises when the number of alternate-bond hexagons exceeds about 2/3. Therefore, the alternate-bond hexagons, typically considered as disorders, actually serve as the building blocks of the quantum spin liquid in this system. Notably, the low-temperature properties of the quantum spin liquid are directly associated with the height of the out-of-plane yttrium ions, which may be linked to changes in superexchange energies. Our results suggest that understanding the magnetic ground states in this system lies beyond the theoretical framework of the Heisenberg model constructed on the kagome lattice.
△ Less
Submitted 21 April, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Bound state solutions of the two--dimensional Schrödinger equation with Kratzer--type potentials
Authors:
Roman Ya. Kezerashvili,
Jianning Luo,
Claudio R. Malvino
Abstract:
Exactly solvable models play an extremely important role in many fields of quantum physics. In this study, the Schrödinger equation is applied for a solution of a two--dimensional (2D) problem for two particles interacting via Kratzer, and modified Kratzer potentials. We found the exact bound state solutions of the two--dimensional Schrödinger equation with Kratzer--type potentials and present ana…
▽ More
Exactly solvable models play an extremely important role in many fields of quantum physics. In this study, the Schrödinger equation is applied for a solution of a two--dimensional (2D) problem for two particles interacting via Kratzer, and modified Kratzer potentials. We found the exact bound state solutions of the two--dimensional Schrödinger equation with Kratzer--type potentials and present analytical expressions for the eigenvalues and eigenfunctions. The eigenfunctions are given in terms of the associated Laguerre polynomials.
△ Less
Submitted 19 November, 2023; v1 submitted 5 November, 2023;
originally announced November 2023.
-
Photon-resolved Floquet theory in open quantum systems
Authors:
G. Engelhardt,
JunYan Luo,
V. M. Bastidas,
G. Platero
Abstract:
Photon-resolved Floquet theory keeps track of the photon exchange of a quantum system with a coherent driving field. It thus complements the standard full-counting statistics that counts the number of photons exchanged with incoherent photon modes giving rise to dissipation. In this paper, we introduce a unifying framework describing both situations. We develop methods suitable for an analytical e…
▽ More
Photon-resolved Floquet theory keeps track of the photon exchange of a quantum system with a coherent driving field. It thus complements the standard full-counting statistics that counts the number of photons exchanged with incoherent photon modes giving rise to dissipation. In this paper, we introduce a unifying framework describing both situations. We develop methods suitable for an analytical evaluation of low-order cumulants of photonic probability distributions. Within this framework we analyze the two-mode Jaynes-Cummings model to demonstrate that the Photon-resolved Floquet theory and the standard full-counting statistics make consistent statistical predictions. Interestingly, we find that the photon-flux fluctuations diverge for vanishing dissipation, which can be related to an entanglement effect between the driven matter system and the driving field. To substantiate our results, we use our framework to describe efficient photon up-conversion in an ac-driven lambda system, that is characterized by a high signal-to-noise ratio. As the framework is non-perturbative and predicts fluctuations, it paves the way towards non-perturbative spectroscopy, which will assist to improve metrological methods.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Superconductivity emerging from density-wave-like order in a correlated kagome metal
Authors:
Yi Liu,
Zi-Yi Liu,
Jin-Ke Bao,
Peng-Tao Yang,
Liang-Wen Ji,
Si-Qi Wu,
Qin-Xin Shen,
Jun Luo,
Jie Yang,
Ji-Yong Liu,
Chen-Chao Xu,
Wu-Zhang Yang,
Wan-Li Chai,
Jia-Yi Lu,
Chang-Chao Liu,
Bo-Sen Wang,
Hao Jiang,
Qian Tao,
Zhi Ren,
Xiao-Feng Xu,
Chao Cao,
Zhu-An Xu,
Rui Zhou,
Jin-Guang Cheng,
Guang-Han Cao
Abstract:
Unconventional superconductivity (USC) in a highly correlated kagome system has been theoretically proposed for years, yet the experimental realization is hard to achieve. The recently discovered vanadium-based kagome materials, which exhibit both superconductivity and charge density wave (CDW) orders, are nonmagnetic and weakly correlated, thus unlikely host USC as theories proposed. Here we repo…
▽ More
Unconventional superconductivity (USC) in a highly correlated kagome system has been theoretically proposed for years, yet the experimental realization is hard to achieve. The recently discovered vanadium-based kagome materials, which exhibit both superconductivity and charge density wave (CDW) orders, are nonmagnetic and weakly correlated, thus unlikely host USC as theories proposed. Here we report the discovery of a chromium-based kagome metal, CsCr$_3$Sb$_5$, which is contrastingly characterised by strong electron correlations, frustrated magnetism, and characteristic flat bands close to the Fermi level. Under ambient pressure, it undergoes a concurrent structural and magnetic phase transition at 55 K, accompanying with a stripe-like $4a_0$ structural modulation. At high pressure, the phase transition evolves into two transitions, probably associated with CDW and antiferromagnetic spin-density-wave orderings, respectively. These density-wave (DW)-like orders are gradually suppressed with pressure and, remarkably, a superconducting dome emerges at 3.65-8.0 GPa. The maximum of the superconducting transition temperature, $T_\mathrm{c}^{\mathrm{max}}=$ 6.4 K, appears when the DW-like orders are completely suppressed at 4.2 GPa, and the normal state exhibits a non-Fermi-liquid behaviour, reminiscent of USC and quantum criticality in iron-based superconductors. Our work offers an unprecedented platform for investigating possible USC in a correlated kagome system.
△ Less
Submitted 16 March, 2024; v1 submitted 23 September, 2023;
originally announced September 2023.
-
Layer-dependent exciton polarizability and the brightening of dark excitons in few-layer black phosphorus
Authors:
Yuchen Lei,
Junwei Ma,
Jiaming Luo,
Shenyang Huang,
Boyang Yu,
Chaoyu Song,
Qiaoxia Xing,
Fanjie Wang,
Yuangang Xie,
Jiasheng Zhang,
Lei Mu,
Yixuan Ma,
Chong Wang,
Hugen Yan
Abstract:
The evolution of excitons from 2D to 3D is of great importance in photo-physics, yet the layer-dependent exciton polarizability has not been investigated in 2D semiconductors. Here, we determine the exciton polarizabilities for 3- to 11-layer black phosphorus-a direct bandgap semiconductor regardless of the thickness-through frequency-resolved photocurrent measurements on dual-gate devices and unv…
▽ More
The evolution of excitons from 2D to 3D is of great importance in photo-physics, yet the layer-dependent exciton polarizability has not been investigated in 2D semiconductors. Here, we determine the exciton polarizabilities for 3- to 11-layer black phosphorus-a direct bandgap semiconductor regardless of the thickness-through frequency-resolved photocurrent measurements on dual-gate devices and unveil the carrier screening effect in relatively thicker samples. By taking advantage of the broadband photocurrent spectra, we are also able to reveal the exciton response for higher-index subbands under the gate electrical field. Surprisingly, dark excitons are brightened with intensity even stronger than the allowed transitions above certain electrical field. Our study not only sheds light on the exciton evolution with sample thickness, but also paves a way for optoelectronic applications of few-layer BP in modulators, tunable photodetectors, emitters and lasers.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Creating Continuously Graded Microstructures with Electric Fields via Locally Altering Grain Boundary Complexions
Authors:
Qizhang Yan,
Chongze Hu,
Jian Luo
Abstract:
Tailoring microstructures represents a daunting goal in materials science. Here, an innovative proposition is to utilize grain boundary (GB) complexions (a.k.a. interfacial phases) to manipulate microstructural evolution, which is challenging to control via only temperature and doping. Herein, we use ZnO as a model system to tailor microstructures using applied electric fields as a new knob to con…
▽ More
Tailoring microstructures represents a daunting goal in materials science. Here, an innovative proposition is to utilize grain boundary (GB) complexions (a.k.a. interfacial phases) to manipulate microstructural evolution, which is challenging to control via only temperature and doping. Herein, we use ZnO as a model system to tailor microstructures using applied electric fields as a new knob to control GB structures locally via field-driven stoichiometry (defects) polarization. Specifically, continuously graded microstructures are created under applied electric fields. By employing aberration-corrected scanning transmission electron microscopy (AC STEM) in conjunction with density functional theory (DFT) and ab initio molecular dynamics (AIMD), we discover cation-deficient, oxygen-rich GBs near the anode with enhanced GB diffusivities. In addition, the field-driven redistribution of cation vacancies is deduced from a defect chemistry model, and subsequently verified by spatially resolved photoluminescence spectroscopy. This bulk stoichiometry polarization leads to preferential formation of cation-deficient (oxidized) GBs near the anode to gradually promote grain growth towards the anode. This mechanism can be utilized to create continuously graded microstructures without abnormal grain growth typically observed in prior studies. This study exemplifies a case of tailoring microstructural evolution via altering GB complexions locally with applied electric fields, and it enriches fundamental GB science.
△ Less
Submitted 17 September, 2023;
originally announced September 2023.
-
Direct visualization of electric current induced dipoles of atomic impurities
Authors:
Yaowu Liu,
Zichun Zhang,
Sidan Chen,
Shengnan Xu,
Lichen Ji,
Wei Chen,
Xinyu Zhou,
Jiaxin Luo,
Xiaopen Hu,
Wenhui Duan,
Xi Chen,
Qi-Kun Xue,
Shuai-Hua Ji
Abstract:
Learning the electron scattering around atomic impurities is a fundamental step to fully understand the basic electronic transport properties of realistic conducting materials. Although many efforts have been made in this field for several decades, atomic scale transport around single point-like impurities has yet been achieved. Here, we report the direct visualization of the electric current indu…
▽ More
Learning the electron scattering around atomic impurities is a fundamental step to fully understand the basic electronic transport properties of realistic conducting materials. Although many efforts have been made in this field for several decades, atomic scale transport around single point-like impurities has yet been achieved. Here, we report the direct visualization of the electric current induced dipoles around single atomic impurities in epitaxial bilayer graphene by multi-probe low temperature scanning tunneling potentiometry as the local current density is raised up to around 25 A/m, which is considerably higher than that in previous studies. We find the directions of these dipoles which are parallel or anti-parallel to local current are determined by the charge polarity of the impurities, revealing the direct evidence for the existence of the carrier density modulation effect proposed by Landauer in 1976. Furthermore, by $in$ $situ$ tuning local current direction with contact probes, these dipoles are redirected correspondingly. Our work paves the way to explore the electronic quantum transport phenomena at single atomic impurity level and the potential future electronics toward or beyond the end of Moore's Law.
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Persistence of Monoclinic Crystal Structure in Three-Dimensional Second-Order Topological Insulator Candidate 1T'-MoTe2 Thin Flake without Structural Phase transition
Authors:
Bo Su,
Yuan Huang,
Yan Hui Hou,
Jiawei Li,
Rong Yang,
Yongchang Ma,
Yang Yang,
Guangyu Zhang,
Xingjiang Zhou,
Jianlin Luo,
Zhi-Guo Chen
Abstract:
A van der Waals material, MoTe2 with a monoclinic 1T' crystal structure is a candidate for three-dimensional (3D) second-order topological insulators (SOTIs) hosting gapless hinge states and insulating surface states. However, due to the temperature-induced structural phase transition, the monoclinic 1T' structure of MoTe2 would be transformed into the orthorhombic Td structure as the temperature…
▽ More
A van der Waals material, MoTe2 with a monoclinic 1T' crystal structure is a candidate for three-dimensional (3D) second-order topological insulators (SOTIs) hosting gapless hinge states and insulating surface states. However, due to the temperature-induced structural phase transition, the monoclinic 1T' structure of MoTe2 would be transformed into the orthorhombic Td structure as the temperature is lowered, which hinders the experimental verification and the electronic applications of the predicted SOTI state at low temperatures. Here, we present systematic Raman spectroscopy studies of the exfoliated MoTe2 thin flakes with variable thicknesses at different temperatures. As a spectroscopic signature of the orthorhombic Td structure of MoTe2, the out-of-plane vibration mode D at ~ 125 cm-1 is always visible below a certain temperature in the multilayer flakes thicker than ~ 27.7 nm, but vanishes in the temperature range from 80 K to 320 K when the flake thickness becomes lower than ~ 19.5 nm. The absence of the out-of-plane vibration mode D in the Raman spectra here demonstrates not only the disappearance of the monoclinic-to-orthorhombic phase transition but also the persistence of the monoclinic 1T' structure in the MoTe2 thin flakes thinner than ~ 19.5 nm at low temperatures down to 80 K, which may be caused by the high enough density of the holes introduced during the gold-enhanced exfoliation process and exposure to air. The MoTe2 thin flakes with the low-temperature monoclinic 1T' structure provide a material platform for realizing SOTI states in van der Waals materials at low temperatures, which paves the way for developing a new generation of electronic devices based on SOTIs.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
Tightly-bound and room-temperature-stable excitons in van der Waals degenerate-semiconductor Bi4O4SeCl2 with high charge-carrier density
Authors:
Yueshan Xu,
Junjie Wang,
Bo Su,
Jun Deng,
Cao Peng,
Chunlong Wu,
Qinghua Zhang,
Lin Gu,
Jianlin Luo,
Nan Xu,
Jian-gang Guo,
Zhi-Guo Chen
Abstract:
Excitons, which represent a type of quasi-particles consisting of electron-hole pairs bound by the mutual Coulomb interaction, were often observed in lowly-doped semiconductors or insulators. However, realizing excitons in the semiconductors or insulators with high charge carrier densities is a challenging task. Here, we perform infrared spectroscopy, electrical transport, ab initio calculation, a…
▽ More
Excitons, which represent a type of quasi-particles consisting of electron-hole pairs bound by the mutual Coulomb interaction, were often observed in lowly-doped semiconductors or insulators. However, realizing excitons in the semiconductors or insulators with high charge carrier densities is a challenging task. Here, we perform infrared spectroscopy, electrical transport, ab initio calculation, and angle-resolved-photoemission spectroscopy studies of a van der Waals degenerate-semiconductor Bi4O4SeCl2. A peak-like feature (i.e., alpha peak) is present around ~ 125 meV in the optical conductivity spectra at low temperature T = 8 K and room temperature. After being excluded from the optical excitations of free carriers, interband transitions, localized states and polarons, the alpha peak is assigned as the exciton absorption. Moreover, assuming the existence of weakly-bound excitons--Wannier-type excitons in this material violates the Lyddane-Sachs-Teller relation. Besides, the exciton binding energy of ~ 375 meV, which is about an order of magnitude larger than those of conventional semiconductors, and the charge-carrier concentration of ~ 1.25 * 10^19 cm^-3, which is higher than the Mott density, further indicate that the excitons in this highly-doped system should be tightly bound. Our results pave the way for developing the optoelectronic devices based on the tightly-bound and room-temperature-stable excitons in highly-doped van der Waals degenerate semiconductors.
△ Less
Submitted 27 August, 2023;
originally announced August 2023.
-
The interface states in gate-all-around transistors (GAAFETs)
Authors:
Yue-Yang Liu,
Haoran Lu,
Zirui Wang,
Hui-Xiong Deng,
Lang Zeng,
Zhongming Wei,
Jun-Wei Luo,
Runsheng Wang
Abstract:
The atomic-level structural detail and the quantum effects are becoming crucial to device performance as the emerging advanced transistors, representatively GAAFETs, are scaling down towards sub-3nm nodes. However, a multiscale simulation framework based on atomistic models and ab initio quantum simulation is still absent. Here, we propose such a simulation framework by fulfilling three challengin…
▽ More
The atomic-level structural detail and the quantum effects are becoming crucial to device performance as the emerging advanced transistors, representatively GAAFETs, are scaling down towards sub-3nm nodes. However, a multiscale simulation framework based on atomistic models and ab initio quantum simulation is still absent. Here, we propose such a simulation framework by fulfilling three challenging tasks, i.e., building atomistic all-around interfaces between semiconductor and amorphous gate-oxide, conducting large-scale first-principles calculations on the interface models containing up to 2796 atoms, and finally bridging the state-of-the-art atomic level calculation to commercial TCAD. With this framework, two unnoticed origins of interface states are demonstrated, and their tunability by changing channel size, orientation and geometry is confirmed. The quantitative study of interface states and their effects on device performance explains why the nanosheet channel is preferred in industry. We believe such a bottom-up framework is necessary and promising for the accurate simulation of emerging advanced transistors.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Phases and magnetism at the microscale in compounds containing nominal Pb10-xCux(PO4)6O
Authors:
Chang Liu,
Wenxin Cheng,
Xiaoxiao Zhang,
Juan Xu,
Jiaxin Li,
Qiuyan Shi,
Changhong Yuan,
Li Xu,
Honglin Zhou,
Shilin Zhu,
Jianping Sun,
Wei Wu,
Jianlin Luo,
Kui Jin,
Yangmu Li
Abstract:
Achieving superconductivity at room temperature could lead to substantial advancements in industry and technology. Recently, a compound known as Cu-doped lead-apatite, Pb10-xCux(PO4)6O (0.9 < x < 1.1), referred to as "LK-99", has been reported to exhibit unusual electrical and magnetic behaviors that appear to resemble a superconducting transition above room temperature. In this work we collected…
▽ More
Achieving superconductivity at room temperature could lead to substantial advancements in industry and technology. Recently, a compound known as Cu-doped lead-apatite, Pb10-xCux(PO4)6O (0.9 < x < 1.1), referred to as "LK-99", has been reported to exhibit unusual electrical and magnetic behaviors that appear to resemble a superconducting transition above room temperature. In this work we collected multiphase samples containing the nominal Pb10-xCux(PO4)6O phase (no superconductivity observed in our measured samples), synthesized by three independent groups, and studied their chemical, magnetic, and electrical properties at the microscale to overcome difficulties in bulk measurements. Through the utilization of optical, scanning electron, atomic force, and scanning diamond nitrogen-vacancy microscopy techniques, we are able to establish a link between local magnetic properties and specific microscale chemical phases. Our findings indicate that while the Pb10-xCux(PO4)6O phase seems to have a mixed magnetism contribution, a significant fraction of the diamagnetic response can be attributed to Cu-rich regions (e.g., Cu2S derived from a reagent used in the synthesis). Additionally, our electrical measurements reveal the phenomenon of current path switch and a change in resistance states of Cu2S. This provides a potential explanation for the electrical behavior observed in compounds related to Pb10-xCux(PO4)6O.
△ Less
Submitted 17 August, 2023; v1 submitted 15 August, 2023;
originally announced August 2023.
-
First order transition in Pb$_{10-x}$Cu$_x$(PO$_4$)$_6$O ($0.9<x<1.1$) containing Cu$_2$S
Authors:
Shilin Zhu,
Wei Wu,
Zheng Li,
Jianlin Luo
Abstract:
Lee et al. reported that the compound LK99, with a chemical formula of Pb$_{10-x}$Cu$_x$(PO$_4$)$_6$O ($0.9<x<1.1$), exhibits room-temperature superconductivity under ambient pressure. In this study, we investigated the transport and magnetic properties of pure Cu$_2$S and LK-99 containing Cu$_2$S. We observed a sharp superconducting-like transition and a thermal hysteresis behavior in the resisti…
▽ More
Lee et al. reported that the compound LK99, with a chemical formula of Pb$_{10-x}$Cu$_x$(PO$_4$)$_6$O ($0.9<x<1.1$), exhibits room-temperature superconductivity under ambient pressure. In this study, we investigated the transport and magnetic properties of pure Cu$_2$S and LK-99 containing Cu$_2$S. We observed a sharp superconducting-like transition and a thermal hysteresis behavior in the resistivity and magnetic susceptibility. However, we did not observe zero-resistivity below the transition temperature. We argue that the so-called superconducting behavior in LK-99 is most likely due to a reduction in resistivity caused by the first order structural phase transition of Cu$_2$S at around 385 K, from the $β$ phase at high temperature to the $γ$ phase at low temperature.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
Exact results of one-dimensional repulsive Hubbard model
Authors:
Jia-Jia Luo,
Han Pu,
Xi-Wen Guan
Abstract:
We present analytical results of fundamental properties of one-dimensional (1D) Hubbard model with a repulsive interaction, ranging from fractional excitations to universal thermodynamics, interaction-driven criticality, correlation functions, Contact susceptibilities and quantum cooling. Using the exact solutions of the Bethe Ansatz equations of the Hubbard model, we first rigorously calculate th…
▽ More
We present analytical results of fundamental properties of one-dimensional (1D) Hubbard model with a repulsive interaction, ranging from fractional excitations to universal thermodynamics, interaction-driven criticality, correlation functions, Contact susceptibilities and quantum cooling. Using the exact solutions of the Bethe Ansatz equations of the Hubbard model, we first rigorously calculate the gapless spin and charge excitations, exhibiting exotic features of fractionalized spinons and holons. Based on the analysis on the fractional charge and spin excitations, the spin-incoherent Luttinger liquid with only the charge propagation mode is elucidated by the asymptotic of the two-point correlation functions with the help of the conformal field theory. Near quadruple critical point, we then further analytically obtain the thermodynamical properties, dimensionless ratios and scaling functions near quantum phase transitions in terms of chemical potential, magnetic field and interaction. In particular, we determine additivity rules of spin and charge susceptibilities, and derive explicit forms of thermodynamics of spin-incoherent Luttinger liquid. Finally, in order to capture deeper insight into the Mott insulator and interaction driven criticality, we further study the double occupancy and its associated Contact and Contact susceptibilities through which an adiabatic cooling scheme upon the quantum criticality is introduced.
△ Less
Submitted 29 July, 2023; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Room temperature optically detected magnetic resonance of single spins in GaN
Authors:
Jialun Luo,
Yifei Geng,
Farhan Rana,
Gregory D. Fuchs
Abstract:
Optically detected magnetic resonance (ODMR) is an efficient mechanism to readout the spin of solid-state color centers at room temperature, thus enabling spin-based quantum sensors of magnetic field, electric field, and temperature with high sensitivity and broad commercial applicability. The mechanism of room temperature ODMR is based on spin-dependent relaxation between the optically excited st…
▽ More
Optically detected magnetic resonance (ODMR) is an efficient mechanism to readout the spin of solid-state color centers at room temperature, thus enabling spin-based quantum sensors of magnetic field, electric field, and temperature with high sensitivity and broad commercial applicability. The mechanism of room temperature ODMR is based on spin-dependent relaxation between the optically excited states to the ground states, and thus it is an intrinsic property of a defect center. In this work we report that two distinct defect types exist in GaN based on their ODMR signatures. One group has small negative ODMR based on a spin in a metastable state. The second group has large (up to $\sim$30\%) positive ODMR contrast based on ground-state spin. Because GaN is a mature semiconductor with well-developed electronic technologies already developed, this defect platform is promising for integrated quantum sensing applications.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Large effective magnetic fields from chiral phonons in rare-earth halides
Authors:
Jiaming Luo,
Tong Lin,
Junjie Zhang,
Xiaotong Chen,
Elizabeth R. Blackert,
Rui Xu,
Boris I. Yakobson,
Hanyu Zhu
Abstract:
Time-reversal symmetry (TRS) is pivotal for materials optical, magnetic, topological, and transport properties. Chiral phonons, characterized by atoms rotating unidirectionally around their equilibrium positions, generate dynamic lattice structures that break TRS. Here we report that coherent chiral phonons, driven by circularly polarized terahertz light pulses, can polarize the paramagnetic spins…
▽ More
Time-reversal symmetry (TRS) is pivotal for materials optical, magnetic, topological, and transport properties. Chiral phonons, characterized by atoms rotating unidirectionally around their equilibrium positions, generate dynamic lattice structures that break TRS. Here we report that coherent chiral phonons, driven by circularly polarized terahertz light pulses, can polarize the paramagnetic spins in CeF3 like a quasi-static magnetic field on the order of 1 Tesla. Through time-resolved Faraday rotation and Kerr ellipticity, we found the transient magnetization is only excited by pulses resonant with phonons, proportional to the angular momentum of the phonons, and growing with magnetic susceptibility at cryogenic temperatures, as expected from the spin-phonon coupling model. The time-dependent effective magnetic field quantitatively agrees with that calculated from phonon dynamics. Our results may open a new route to directly investigate mode-specific spin-phonon interaction in ultrafast magnetism, energy-efficient spintronics, and non-equilibrium phases of matter with broken TRS.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Antiferromagnetic spin fluctuations and unconventional superconductivity in topological superconductor candidate YPtBi revealed by $^{195}$Pt-NMR
Authors:
Y. Z. Zhou,
J. Chen,
Z. X. Li,
J. Luo,
J. Yang,
Y. F. Guo,
W. H. Wang,
R. Zhou,
Guo-qing Zheng
Abstract:
We report $^{195}$Pt nuclear magnetic resonance (NMR) measurements on topological superconductor candidate YPtBi which has the broken inversion symmetry and topological non-trivial band structures due to the strong spin-orbit coupling(SOC). In the normal state, we find that Knight shift $K$ is field- and temperature-independent, suggesting that the contribution from the topological bands is very s…
▽ More
We report $^{195}$Pt nuclear magnetic resonance (NMR) measurements on topological superconductor candidate YPtBi which has the broken inversion symmetry and topological non-trivial band structures due to the strong spin-orbit coupling(SOC). In the normal state, we find that Knight shift $K$ is field- and temperature-independent, suggesting that the contribution from the topological bands is very small at low temperatures. However, the spin-lattice relaxation rate 1/$T_1$ divided by temperature ($T$), 1/$T_1T$, increases with decreasing $T$, implying the existence of antiferromagnetic spin fluctuations. In the superconducting state, no Hebel-Slichter coherence peak is seen below $T_{\rm c}$ and 1/$T_1$ follows $T^{3}$ variation, indicating the unconventional superconductivity. The finite spin susceptibility at zero-temperature limit and the anomalous increase of the NMR line width below $T_{\rm c}$ point to a mixed state of spin-singlet and spin-triplet(or spin-septet) pairing.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
An integrated system built for small-molecule semiconductors via high-throughput approaches
Authors:
Jianchang Wu,
Jiyun Zhang,
Manman Hu,
Patrick Reiser,
Luca Torresi,
Pascal Friederich,
Leopold Lahn,
Olga Kasian,
Dirk M. Guldi,
M. Eugenia Pérez-Ojeda,
Anastasia Barabash,
Juan S. Rocha-Ortiz,
Yicheng Zhao,
Zhiqiang Xie,
Junsheng Luo,
Yunuo Wang,
Sang Il Seok,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarit…
▽ More
High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle of Like dissolves like, we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electric properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production.
△ Less
Submitted 13 May, 2023;
originally announced May 2023.
-
Magnetic proximity effect at the interface of two-dimensional materials and magnetic oxide insulators
Authors:
Junxiong Hua,
Jiangbo Luo,
Yuntian Zheng,
Jiayu Chen,
Ganesh Ji Omar,
Andrew Thye Shen Wee,
A. Ariando
Abstract:
Two-dimensional (2D) materials provide a platform for developing novel spintronic devices and circuits for low-power electronics. In particular, inducing magnetism and injecting spins in graphene have promised the emerging field of graphene spintronics. This review focuses on the magnetic proximity effect at the interface of 2D materials and magnetic oxide insulators. We highlight the unique spin-…
▽ More
Two-dimensional (2D) materials provide a platform for developing novel spintronic devices and circuits for low-power electronics. In particular, inducing magnetism and injecting spins in graphene have promised the emerging field of graphene spintronics. This review focuses on the magnetic proximity effect at the interface of 2D materials and magnetic oxide insulators. We highlight the unique spin-related phenomena arising from magnetic exchange interaction and spin-orbital coupling in 2D materials coupled with magnetic oxides. We also describe the fabrication of multifunctional hybrid devices based on spin transport. We conclude with a perspective of the field and highlight challenges for the design and fabrication of 2D spintronic devices and their potential applications in information storage and logic devices.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
Commensurate-to-incommensurate transition of charge-density-wave order and a possible quantum critical point in pressurized kagome metal CsV$_3$Sb$_5$
Authors:
X. Y. Feng,
Z. Zhao,
J. Luo,
J. Yang,
A. F. Fang,
H. T. Yang,
H. J. Gao,
R. Zhou,
Guo-qing Zheng
Abstract:
Clarifying the interplay between charge density waves (CDWs) and superconductivity is important in the kagome metal CsV$_3$Sb$_5$, and pressure ($P$) can play a crucial role. Here, we present $^{121/123}$Sb nuclear quadrupole resonance (NQR) measurements under hydrostatic pressures up to 2.43 GPa in CsV$_3$Sb$_5$ single crystals. We demonstrate that the CDW gradually changes from a commensurate mo…
▽ More
Clarifying the interplay between charge density waves (CDWs) and superconductivity is important in the kagome metal CsV$_3$Sb$_5$, and pressure ($P$) can play a crucial role. Here, we present $^{121/123}$Sb nuclear quadrupole resonance (NQR) measurements under hydrostatic pressures up to 2.43 GPa in CsV$_3$Sb$_5$ single crystals. We demonstrate that the CDW gradually changes from a commensurate modulation with a star-of-David (SoD) pattern to an incommensurate one with a superimposed SoD and Tri-hexagonal (TrH) pattern stacking along the $c$-axis. Moreover, the linewidth $δν$ of $^{121/123}$Sb-NQR spectra increases with cooling down to $T_{\rm CDW}$, indicating the appearance of a short-range CDW order due to CDW fluctuations pinned by quenched disorders. The $δν$ shows a Curie-Weiss temperature dependence and tends to diverge at $P_{\rm c} \sim$ 1.9 GPa, suggesting that a CDW quantum critical point (QCP) exists at $P_{\rm c}$ where $T_{\rm c}$ shows the maximum. For $P > P_{\rm c}$, spin fluctuations are enhanced when the CDW is suppressed. Our results suggest that the maximal $T_{\rm c}$ at $P_{\rm c} \sim$ 1.9 GPa is related to the CDW QCP and the presence of spin fluctuations prevent the $T_{\rm c}$ from a rapid decrease otherwise after the CDW is completely suppressed.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Electrostatic effect due to patch potentials between closely spaced surfaces
Authors:
Jun Ke,
Wen-Can Dong,
Sheng-Hua Huang,
Yu-Jie Tan,
Wen-Hai Tan,
Shan-Qing Yang,
Cheng-Gang Shao,
Jie Luo
Abstract:
The spatial variation and temporal variation in surface potential are important error sources in various precision experiments and deserved to be considered carefully. In the former case, the theoretical analysis shows that this effect depends on the surface potentials through their spatial autocorrelation functions. By making some modification to the quasi-local correlation model, we obtain a rig…
▽ More
The spatial variation and temporal variation in surface potential are important error sources in various precision experiments and deserved to be considered carefully. In the former case, the theoretical analysis shows that this effect depends on the surface potentials through their spatial autocorrelation functions. By making some modification to the quasi-local correlation model, we obtain a rigorous formula for the patch force, where the magnitude is proportional to ${\frac{1}{{{a}^{2}}}{{(\frac{a}{w})}^{β(a/w)+2}}}$ with ${a}$ the distance between two parallel plates, ${w}$ the mean patch size, and $β$ the scaling coefficient from ${-2}$ to ${-4}$. A torsion balance experiment is then conducted, and obtain a 0.4 mm effective patch size and 20 mV potential variance. In the latter case, we apply an adatom diffusion model to describe this mechanism and predicts a ${f^{-3/4}}$ frequency dependence above 0.01 ${\rm mHz}$. This prediction meets well with a typical experimental results. Finally, we apply these models to analyze the patch effect for two typical experiments. Our analysis will help to investigate the properties of surface potentials.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Controlled alignment of supermoiré lattice in double-aligned graphene heterostructures
Authors:
Junxiong Hu,
Junyou Tan,
Mohammed M. Al Ezzi,
Udvas Chattopadhyay,
Jian Gou,
Yuntian Zheng,
Zihao Wang,
Jiayu Chen,
Reshmi Thottathil,
Jiangbo Luo,
Kenji Watanabe,
Takashi Taniguchi,
Andrew Thye Shen Wee,
Shaffique Adam,
Ariando Ariando
Abstract:
The supermoiré lattice, built by stacking two moiré patterns, provides a platform for creating flat mini-bands and studying electron correlations. An ultimate challenge in assembling a graphene supermoiré lattice is in the deterministic control of its rotational alignment, which is made highly aleatory due to the random nature of the edge chirality and crystal symmetry of each component layer. Emp…
▽ More
The supermoiré lattice, built by stacking two moiré patterns, provides a platform for creating flat mini-bands and studying electron correlations. An ultimate challenge in assembling a graphene supermoiré lattice is in the deterministic control of its rotational alignment, which is made highly aleatory due to the random nature of the edge chirality and crystal symmetry of each component layer. Employing the so-called golden rule of three, here we present an experimental strategy to overcome this challenge and realize the controlled alignment of double-aligned hBN/graphene/hBN supermoiré lattice, where graphene is precisely aligned with both top hBN and bottom hBN. Remarkably, we find that the crystallographic edge of neighboring graphite can be used to better guide the stacking alignment, as demonstrated by the controlled production of 20 moiré samples with an accuracy better than 0.2 degree. Finally, we extend our technique to other strongly correlated electron systems, such as low-angle twisted bilayer graphene and ABC-stacked trilayer graphene, providing a strategy for flat-band engineering in these moiré materials.
△ Less
Submitted 22 June, 2023; v1 submitted 28 January, 2023;
originally announced January 2023.
-
Compositionally Complex Perovskite Oxides as a New Class of Li-Ion Solid Electrolytes
Authors:
Shu-Ting Ko,
Tom Lee,
Ji Qi,
Dawei Zhang,
Wei-Tao Peng,
Xin Wang,
Wei-Che Tsai,
Shikai Sun,
Zhaokun Wang,
William J. Bowman,
Shyue Ping Ong,
Xiaoqing Pan,
Jian Luo
Abstract:
Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Usin…
▽ More
Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Using oxide solid electrolytes for all-solid-state batteries as an exemplar, we validate these new strategies via discovering a new class of compositionally complex perovskite oxides (CCPOs) to show the possibility of improving ionic conductivities beyond the limit of conventional doping. As an example (amongst the 28 CCPOs examined), we demonstrate that the ionic conductivity can be improved by >60% in (Li0.375Sr0.4375)(Ta0.375Nb0.375Zr0.125Hf0.125)O3-δ, in comparison with the state-of-art (Li0.375Sr0.4375)(Ta0.75Zr0.25)O3-δ (LSTZ) baseline, via maintaining comparable electrochemical stability. Furthermore, the ionic conductivity can be improved by another >70% via grain boundary (GB) engineering, achieving >270% of the LSTZ baseline. This work suggests transformative new strategies for designing and tailoring HECs and CCCs, thereby opening a new window for discovering materials for energy storage and many other applications.
△ Less
Submitted 27 December, 2022;
originally announced December 2022.
-
High-temperature stable refractory high-entropy nanoalloys with enhanced sinterability
Authors:
Mingde Qin,
Sashank Shivakumar,
Jian Luo
Abstract:
Nanocrystalline alloys (nanoalloys) are prone to grain growth. It is known that grain boundary segregation and precipitation can stabilize nanoalloys, but the stabilization becomes less effective at high temperatures and adding grain growth inhibitors often reduces sinterability. Herein, we have simultaneously achieved improved sinterability and exceptional high-temperature stability for a class o…
▽ More
Nanocrystalline alloys (nanoalloys) are prone to grain growth. It is known that grain boundary segregation and precipitation can stabilize nanoalloys, but the stabilization becomes less effective at high temperatures and adding grain growth inhibitors often reduces sinterability. Herein, we have simultaneously achieved improved sinterability and exceptional high-temperature stability for a class of MoNbTaTiW-based refractory high-entropy nanoalloys (RHENs). Bulk pellets of RHENs were fabricated through planetary ball milling and spark plasma sintering, achieving 93-96% relative densities with 50-100 nm grain sizes for three compositions. For example, Mo17.8Nb17.8Ta17.8Ti17.8W17.8Ni6Zr5 sintered at 1300 °C attained ~96% relative density with ~55 nm mean grain size. Moreover, these RHENs exhibited exceptional stability at 1300 °C. Both Ti17.8Nb17.8Mo17.8Ta17.8W17.8Ni6Zr5 and Mo18.8Nb18.8Ta18.8Ti18.8W18.8Ni6 retained <150 nm grain sizes with >96% of the theoretical densities after five hours annealing at 1300 °C. Notably, the addition of Ni, a well-known sintering aid for activated sintering of refractory metals such as W and Mo, in high-entropy MoNbTaTiW can promote sintering while maintaining high-temperature stability against rapid grain growth, which can be explained by hypothesized effects of high-entropy grain boundaries. These RHENs possess some of the highest temperature stability achieved for nanoalloys and ultrafine-grained metals.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Colossal Nernst power factor in topological semimetal NbSb$_2$
Authors:
Peng Li,
Pengfei Qiu,
Qing Xu,
Jun Luo,
Yifei Xiong,
Jie Xiao,
Niraj Aryal,
Qiang Li,
Lidong Chen,
Xun Shi
Abstract:
Today solid-state cooling technologies below liquid nitrogen boiling temperature (77 K), crucial to quantum information technology and probing quantum state of matter, are greatly limited due to the lack of good thermoelectric and/or thermomagnetic materials. Here, we report the discovery of colossal Nernst power factor of 3800$\times$10$^{-4}$ W m$^{-1}$ K$^{-2}$ under 5 T at 25 K and high Nernst…
▽ More
Today solid-state cooling technologies below liquid nitrogen boiling temperature (77 K), crucial to quantum information technology and probing quantum state of matter, are greatly limited due to the lack of good thermoelectric and/or thermomagnetic materials. Here, we report the discovery of colossal Nernst power factor of 3800$\times$10$^{-4}$ W m$^{-1}$ K$^{-2}$ under 5 T at 25 K and high Nernst figure-of-merit of 71$\times$10$^{-4}$ K$^{-1}$ under 5 T at 20 K in topological semimetal NbSb$_2$ single crystals. The observed high thermomagnetic performance is attributed to large Nernst thermopower and longitudinal electrical conductivity, and relatively low transverse thermal conductivity. The large and unsaturated Nernst thermopower is the result of the combination of highly desirable electronic structures of NbSb$_2$ having compensated high mobility electrons and holes near Fermi level and strong phonon-drag effect. This discovery opens an avenue for exploring material option for the solid-state heat pumping below liquid nitrogen temperature.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Enhanced piezoelectric response of AlN via alloying of transitional metals, and influence of type and distribution of transition metals
Authors:
Xian-Hu Zha,
Xiufang Ma,
Jing-Ting Luo,
Chen Fu
Abstract:
Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, an…
▽ More
Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, and most show higher values of piezoelectric strain modulus d33 than that of AlN. This is because the TM introduces weaker TM-N bonds and locates closer to the centre of three neighbouring N atoms. The location of TM is determined to be significantly correlated with its group number. Alloys of TMxAl1-xN (TM=Sc, Cr, Sr, Mo, Ru and Rh) with varying x are further studied. On basis of the cost of the TMs and piezoelectric performances, the alloy with Mo is more effective in enhancing d33. A high d33 of 12.3 times that of pure AlN is realized in a metastable configuration of Mo0.167Al0.833N. The distribution of Mo plays a key role in the piezoelectric performance. A higher d33 is more likely to appear in MoxAl1-xN with more Al sublayers containing Mo atoms and with fewer dimers of Mo atoms along the z-axis.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Revealing strong coupling of collective modes between superconductivity and pseudogap in cuprate superconductor by terahertz third harmonic generation
Authors:
J. Y. Yuan,
L. Y. Shi,
L. Yue,
B. H. Li,
Z. X. Wang,
S. X. Xu,
T. Q. Xu,
Y. Wang,
Z. Z. Gan,
F. C. Chen,
Z. F. Lin,
X. Wang,
K. Jin,
X. B. Wang,
J. L. Luo,
S. J. Zhang,
Q. Wu,
Q. M. Liu,
T. C. Hu,
R. S. Li,
X. Y. Zhou,
D. Wu,
T. Dong,
N. L. Wang
Abstract:
The study of interaction between different degrees of freedom in solids is of fundamental importance to understand the functionalities of materials. One striking example of such interaction is the intertwined coupling or competition between superconductivity (SC), charge density wave (CDW), pseudogap state (PG), and other exotic phases in cuprate superconductors. Recent emergence of nonlinear Tera…
▽ More
The study of interaction between different degrees of freedom in solids is of fundamental importance to understand the functionalities of materials. One striking example of such interaction is the intertwined coupling or competition between superconductivity (SC), charge density wave (CDW), pseudogap state (PG), and other exotic phases in cuprate superconductors. Recent emergence of nonlinear Terahertz (THz) third harmonic generation (THG) spectroscopy provides a powerful tool for exploring the collective (Higgs) modes of superconductivity order parameters, and its interaction with intertwined/competing phases. In this study, we report on nonlinear THz THG spectroscopy of the YBa$_2$Cu$_3$O$_{6+x}$ (YBCO) thin films with different doping. We identify a characteristic temperature $T_{THG}$, below which third order suscepetility $χ^{(3)}$ emerges. Notably, the $T_{THG}$ is coincident with the crossover temperature $T^*$ of pseudogap in a wide range doping of phase diagram. Upon entering the superconducting state, THG increases sharply but exhibits an abnormal dip feature near $T_c$ which is more clearly seen in optimally doped sample. Strikingly, we observe a beating structure directly in the measured real time waveform of THG signal. Fourier transformation of the time domain waveform gives two separate modes below and above original THG frequency. The observation strongly indicates that an additional mode, presumably Higgs mode, appears at $T_c$ and couples to the mode already developed below $T^*$. The strong coupling effect offers new insight into the interplay between superconductivity and pseudogap. The result unambiguously suggests that the pseudogap phase is not a precursor of superconductivity but represents a distinct order.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Two-dimensional natural hyperbolic materials: From polaritons modulation to applications
Authors:
Guangyi Jia,
Jinxuan Luo,
Huaiwen Wang,
Qiaoyun Ma,
Qinggang Liu,
Haitao Dai,
Reza Asgari
Abstract:
Natural hyperbolic materials (HMs) in two dimensions (2D) have an extraordinarily high anisotropy and a hyperbolic dispersion relation. Some of them can even sustain hyperbolic polaritons with great directional propagation and light compression to deeply sub-wavelength scales due to their inherent anisotropy. Herein, the anisotropic optical features of 2D natural HMs are reviewed. Four hyperbolic…
▽ More
Natural hyperbolic materials (HMs) in two dimensions (2D) have an extraordinarily high anisotropy and a hyperbolic dispersion relation. Some of them can even sustain hyperbolic polaritons with great directional propagation and light compression to deeply sub-wavelength scales due to their inherent anisotropy. Herein, the anisotropic optical features of 2D natural HMs are reviewed. Four hyperbolic polaritons (i.e., phonon polaritons, plasmon polaritons, exciton-polaritons, and shear polaritons) as well as their generation mechanism are discussed in detail. The natural merits of 2D HMs hold promise for practical quantum photonic applications such as valley quantum interference, mid-infrared polarizer, spontaneous emission enhancement, near-field thermal radiation, and a new generation of optoelectronic components, among others. These analyses' conclusion outlines existing issues and potential interesting directions for 2D natural HMs. These findings could spur more interest in anisotropic 2D atomic crystals in the future, as well as the quick generation of natural HMs for new applications.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
Influence of chemistry and structure on interfacial segregation in NbMoTaW with high-throughput atomistic simulations
Authors:
Ian Geiger,
Jian Luo,
Enrique J. Lavernia,
Penghui Cao,
Diran Apelian,
Timothy J. Rupert
Abstract:
Refractory multi-principal element alloys exhibiting promising mechanical properties such as excellent strength retention at elevated temperatures have been attracting increasing attention. Although their inherent chemical complexity is considered a defining feature, a challenge arises in predicting local chemical ordering, particularly in grain boundary regions with enhanced structural disorder.…
▽ More
Refractory multi-principal element alloys exhibiting promising mechanical properties such as excellent strength retention at elevated temperatures have been attracting increasing attention. Although their inherent chemical complexity is considered a defining feature, a challenge arises in predicting local chemical ordering, particularly in grain boundary regions with enhanced structural disorder. In this study, we use atomistic simulations of a large group of bicrystal models to sample a wide variety of interfacial sites (grain boundary) in NbMoTaW and explore emergent trends in interfacial segregation and the underlying structural and chemical driving factors. Sampling hundreds of bicrystals along the [001] symmetric tilt axis and analyzing more than one hundred and thirty thousand grain boundary sites with a variety of local atomic environments, we uncover segregation trends in NbMoTaW. While Nb is the dominant segregant, more notable are the segregation patterns that deviate from expected behavior and mark situations where local structural and chemical driving forces lead to interesting segregation events. For example, incomplete depletion of Ta in low-angle boundaries results from chemical pinning due to favorable local compositional environments associated with chemical short-range ordering. Finally, machine learning models capturing and comparing the structural and chemical features of interfacial sites are developed to weigh their relative importance and contributions to segregation tendency, revealing a significant increase in predictive capability when including local chemical information. Overall, this work, highlighting the complex interplay between local grain boundary structure and chemical short-range ordering, suggest tunable segregation and chemical ordering by tailoring grain boundary structure in multi-principal element alloys.
△ Less
Submitted 24 November, 2022; v1 submitted 11 October, 2022;
originally announced October 2022.
-
High-performance non-Fermi-liquid metallic thermoelectric materials
Authors:
Zirui Dong,
Yubo Zhang,
Jun Luo,
Ying Jiang,
Zhiyang Yu,
Nan Zhao,
Liusuo Wu,
Yurong Ruan,
Fang Zhang,
Kai Guo,
Jiye Zhang,
Wenqing Zhang
Abstract:
Searching for high-performance thermoelectric (TE) materials in the paradigm of narrow-bandgap semiconductors has lasted for nearly 70 years and is obviously hampered by a bottleneck of research now. Here we report on the discovery of a few metallic compounds, TiFexCu2x-1Sb and TiFe1.33Sb, showing the thermopower exceeding many TE semiconductors and the dimensionless figure of merits comparable wi…
▽ More
Searching for high-performance thermoelectric (TE) materials in the paradigm of narrow-bandgap semiconductors has lasted for nearly 70 years and is obviously hampered by a bottleneck of research now. Here we report on the discovery of a few metallic compounds, TiFexCu2x-1Sb and TiFe1.33Sb, showing the thermopower exceeding many TE semiconductors and the dimensionless figure of merits comparable with the state-of-the-art TE materials. A quasi-linear temperature (T) dependence of electrical resistivity in 2 K - 700 K and the logarithmic T-dependent electronic specific heat at low temperature are also observed to coexist with the high thermopower, highlighting the strong intercoupling of the non-Fermi-liquid (NFL) quantum critical behavior of electrons with TE transports. Electronic structure analysis reveals the existence of fluctuating Fe-eg-related local magnetic moments, Fe-Fe antiferromagnetic (AFM) interaction at the nearest 4c-4d sites, and two-fold degenerate eg orbitals antiferromagnetically coupled with the dual-type itinerant electrons close to the Fermi level, all of which infer to a competition between the AFM ordering and Kondo-like spin compensation as well as a parallel two-channel Kondo effect. These effects are both strongly meditated by the structural disorder due to the random filling of Fe/Cu at the equivalent 4c/4d sites of the Heusler crystal lattice. The magnetic susceptibility deviates from ideal antiferromagnetism but can be fitted well by x(T) = 1/(θ + BTα), seemingly being consistent with the quantum critical scenario of strong local correlation as discussed before. Our work not only breaks the dilemma that the promising TE materials should be heavily-doped semiconductors, but also demonstrates the correlation among high TE performance, NFL quantum criticality, and magnetic fluctuation, which opens up new directions for future research.
△ Less
Submitted 9 October, 2022;
originally announced October 2022.
-
Origin of Immediate Damping of Coherent Oscillations in Photoinduced Charge Density Wave Transition
Authors:
Yu-Xiang Gu§,
Wen-Hao Liu§,
Zhi Wang,
Shu-Shen Li,
Lin-Wang Wang,
Jun-Wei Luo
Abstract:
In stark contrast to the conventional charge density wave (CDW) materials, the one-dimensional CDW on the In/Si(111) surface exhibits immediate damping of the CDW oscillation during the photoinduced phase transition. Here, by successfully reproducing the experimentally observed photoinduced CDW transition on the In/Si(111) surface by performing real-time time-dependent density functional theory (r…
▽ More
In stark contrast to the conventional charge density wave (CDW) materials, the one-dimensional CDW on the In/Si(111) surface exhibits immediate damping of the CDW oscillation during the photoinduced phase transition. Here, by successfully reproducing the experimentally observed photoinduced CDW transition on the In/Si(111) surface by performing real-time time-dependent density functional theory (rt-TDDFT) simulations, we demonstrate that photoexcitation promotes valence electrons from Si substrate to empty surface bands composed primarily of the covalent p-p bonding states of the long In-In bonds, generating interatomic forces to shorten the long bonds and in turn drives coherently the structural transition. We illustrate that after the structural transition, the component of these surface bands occurs a switch among different covalent In bonds, causing a rotation of the interatomic forces by about π/6 and thus quickly damping the oscillations in feature CDW modes. These findings provide a deeper understanding of photoinduced phase transitions.
△ Less
Submitted 24 September, 2022;
originally announced September 2022.
-
Compositionally Complex Perovskite Oxides for Solar Thermochemical Water Splitting
Authors:
Dawei Zhang,
Hector A. De Santiago,
Boyuan Xu,
Cijie Liu,
Jamie Trindell,
Wei Li,
Jiyun Park,
Mark A. Rodriguez,
Eric N. Coker,
Josh Sugar,
Anthony McDaniel,
Stephan Lany,
Liang Ma,
Yi Wang,
Gregory Collins,
Hanchen Tian,
Wenyuan Li,
Yue Qi,
Xingbo Liu,
Jian Luo
Abstract:
Solar thermochemical hydrogen generation (STCH) is a promising approach for eco-friendly H2 production, but conventional STCH redox compounds often suffer from thermodynamic and kinetic limitations with limited tunability. Expanding from the nascent high-entropy ceramics field, this study explores a new class of compositionally complex perovskite oxides (La0.8Sr0.2)(Mn(1-x)/3Fe(1-x)/3CoxAl(1-x)/3)…
▽ More
Solar thermochemical hydrogen generation (STCH) is a promising approach for eco-friendly H2 production, but conventional STCH redox compounds often suffer from thermodynamic and kinetic limitations with limited tunability. Expanding from the nascent high-entropy ceramics field, this study explores a new class of compositionally complex perovskite oxides (La0.8Sr0.2)(Mn(1-x)/3Fe(1-x)/3CoxAl(1-x)/3)O3 for STCH. In situ X-ray diffraction demonstrates the phase stability during redox cycling and in situ X-ray photoelectron spectroscopy shows preferential redox of Co. The extent of reduction increases, but the intrinsic kinetics decreases, with increased Co content. Consequently, (La0.8Sr0.2)(Mn0.2Fe0.2Co0.4Al0.2)O3-δ achieves an optimal balance between the thermodynamics and kinetics properties. The combination of a moderate enthalpy of reduction, high entropy of reduction, and preferable surface oxygen exchange kinetics enables a maximum H2 yield of 395 +- 11 μmol g-1 in a short 1-hour redox duration. Entropy stabilization expectedly contributes to the structure stability during redox without phase transformation, which enables an exceptional STCH stability for >50 cycles under harsh interrupted conditions. The underlying redox mechanism is further elucidated by the density functional theory based parallel Monte Carlo computation, which represents a new computation paradigm first established here. This study suggests a new class of non-equimolar compositionally complex ceramics for STCH and chemical looping.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Spin incoherent liquid and interaction-driven criticality in 1D Hubbard model
Authors:
Jia-Jia Luo,
Han Pu,
Xi-Wen Guan
Abstract:
Although the one dimensional (1D) repulsive Fermi-Hubbard model has been intensively studied over many decades, a rigorous understanding of many aspects of the model is still lacking. In this work, based on the solutions to the thermodynamic Bethe ansatz equations, we provide a rigorous study on the following: (1) We calculate the fractional excitations of the system in various phases, from which…
▽ More
Although the one dimensional (1D) repulsive Fermi-Hubbard model has been intensively studied over many decades, a rigorous understanding of many aspects of the model is still lacking. In this work, based on the solutions to the thermodynamic Bethe ansatz equations, we provide a rigorous study on the following: (1) We calculate the fractional excitations of the system in various phases, from which we identify the parameter regime featuring the spin incoherent Luttinger liquid (SILL). We investigate the universal properties and the asymprotic of correlation functions of the SILL. (2) We study the interaction-driven phase transition and the associated criticality, and build up an essential connection between the Contact susceptibilities and the variations of density, magnetization and entropy with respect to the interaction strength. As an application of these concepts, which hold true for higher dimensional systems, we propose a quantum cooling scheme based on the interaction-driven refrigeration cycle.
△ Less
Submitted 11 January, 2023; v1 submitted 17 September, 2022;
originally announced September 2022.