-
Non-linearity in the system of quasiparticles of a superconducting resonator
Authors:
M. Vignati,
C. Bellenghi,
L. Cardani,
N. Casali,
I. Colantoni,
A. Cruciani
Abstract:
We observed a strong non-linearity in the system of quasiparticles of a superconducting aluminum resonator, due to the Cooper-pair breaking from the absorbed readout power. We observed both negative and positive feedback effects, controlled by the detuning of the readout frequency, which are able to alter the relaxation time of quasiparticles by a factor greater than 10. We estimate that the (70+/…
▽ More
We observed a strong non-linearity in the system of quasiparticles of a superconducting aluminum resonator, due to the Cooper-pair breaking from the absorbed readout power. We observed both negative and positive feedback effects, controlled by the detuning of the readout frequency, which are able to alter the relaxation time of quasiparticles by a factor greater than 10. We estimate that the (70+/-5) % of the total non-linearity of the device is due to quasiparticles.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Reducing the impact of radioactivity on quantum circuits in a deep-underground facility
Authors:
Laura Cardani,
Francesco Valenti,
Nicola Casali,
Gianluigi Catelani,
Thibault Charpentier,
Massimiliano Clemenza,
Ivan Colantoni,
Angelo Cruciani,
Luca Gironi,
Lukas Grünhaupt,
Daria Gusenkova,
Fabio Henriques,
Marc Lagoin,
Maria Martinez,
Giorgio Pettinari,
Claudia Rusconi,
Oliver Sander,
Alexey V. Ustinov,
Marc Weber,
Wolfgang Wernsdorfer,
Marco Vignati,
Stefano Pirro,
Ioan M. Pop
Abstract:
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of…
▽ More
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of broken Cooper pairs, so-called quasiparticles. Here, we show that environmental radioactivity is a significant source of nonequilibrium quasiparticles. Moreover, ionizing radiation introduces time-correlated quasiparticle bursts in resonators on the same chip, further complicating quantum error correction. Operating in a deep-underground lead-shielded cryostat decreases the quasiparticle burst rate by a factor fifty and reduces dissipation up to a factor four, showcasing the importance of radiation abatement in future solid-state quantum hardware.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Phonon traps reduce the quasiparticle density in superconducting circuits
Authors:
Fabio Henriques,
Francesco Valenti,
Thibault Charpentier,
Marc Lagoin,
Clement Gouriou,
Maria Martínez,
Laura Cardani,
Marco Vignati,
Lukas Grünhaupt,
Daria Gusenkova,
Julian Ferrero,
Sebastian T. Skacel,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Gianluigi Catelani,
Oliver Sander,
Ioan M. Pop
Abstract:
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. Th…
▽ More
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. The cyclic process of recombination and generation of QPs implies the exchange of phonons between the superconducting thin film and the underlying substrate. Reducing the number of substrate phonons with frequencies exceeding the spectral gap of the superconductor should result in a reduction of QPs. Indeed, we demonstrate that surrounding high impedance resonators made of granular aluminum (grAl) with lower gapped thin film aluminum islands increases the internal quality factors of the resonators in the single photon regime, suppresses the noise, and reduces the rate of observed QP bursts. The aluminum islands are positioned far enough from the resonators to be electromagnetically decoupled, thus not changing the resonator frequency, nor the loading. We therefore attribute the improvements observed in grAl resonators to phonon trapping at frequencies close to the spectral gap of aluminum, well below the grAl gap.
△ Less
Submitted 20 August, 2019; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Measurements and simulations of athermal phonon transmission from silicon absorbers to aluminium sensors
Authors:
M. Martinez,
L. Cardani,
N. Casali,
A. Cruciani,
G. Pettinari,
M. Vignati
Abstract:
Phonon reflection and transmission at the interfaces plays a fundamental role in cryogenic particle detectors, in which the optimization of the phonon signal at the sensor (in case of phonon-mediated detectors) or the minimization of the heat transmission (when the detection occurs in the sensor itself) is of primary importance to improve sensitivity. Nevertheless, the mechanisms governing the pho…
▽ More
Phonon reflection and transmission at the interfaces plays a fundamental role in cryogenic particle detectors, in which the optimization of the phonon signal at the sensor (in case of phonon-mediated detectors) or the minimization of the heat transmission (when the detection occurs in the sensor itself) is of primary importance to improve sensitivity. Nevertheless, the mechanisms governing the phonon physics at the interfaces are still not completely understood. The two more successful models, the acoustic mismatch model (AMM) and diffuse mismatch model (DMM) are not able to explain all the accumulated experimental data and the measurement of the transmission coefficients between the materials remains a challenge. Here, we use measurements of the athermal phonon flux in aluminium Kinetic Inductance Detectors (KID) deposited on silicon substrates following a particle interaction to validate a Monte Carlo (MC) phonon simulation. We apply the Mattis-Bardeen theory to derive the phonon pulse energy and timing from the KID signal and compare the results with the MC for both AMM and DMM models, finding a remarkable good agreement for AMM, while diffuse reflection is clearly disfavored. For an aluminum film of 60 nm and a silicon substrate of 380~$μ$m, we obtain transmission coefficients Si-Al in the range [0.3-0.55] and Si-Teflon in the range [0.1-0.15].
△ Less
Submitted 13 June, 2019; v1 submitted 7 May, 2018;
originally announced May 2018.
-
Low Energy Neutron Production by Inverse-beta decay in Metallic Hydride Surfaces
Authors:
S. Ciuchi,
L. Maiani,
A. D. Polosa,
V. Riquer,
G. Ruocco,
M. Vignati
Abstract:
It has been recently argued that inverse-beta nuclear transmutations might occur at an impressively high rate in a thin layer at the metallic hydride surface under specific conditions. In this note we present a calculation of the transmutation rate which shows that there is little room for such a remarkable effect.
It has been recently argued that inverse-beta nuclear transmutations might occur at an impressively high rate in a thin layer at the metallic hydride surface under specific conditions. In this note we present a calculation of the transmutation rate which shows that there is little room for such a remarkable effect.
△ Less
Submitted 28 September, 2012;
originally announced September 2012.
-
Production of high purity TeO2 single crystals for the study of neutrinoless double beta decay
Authors:
C. Arnaboldi,
C. Brofferio,
A. Bryant,
C. Bucci,
L. Canonica,
S. Capelli,
M. Carrettoni,
M. Clemenza,
I. Dafinei,
S. Di Domizio,
F. Ferroni,
E. Fiorini,
Z. Ge,
A. Giachero,
L. Gironi,
A. Giuliani,
P. Gorla,
E. Guardincerri,
R. Kadel,
K. Kazkaz,
L. Kogler,
Y. Kolomensky,
J. Larsen,
M. Laubenstein,
Y. Li
, et al. (21 additional authors not shown)
Abstract:
High purity TeO2 crystals are produced to be used for the search for the neutrinoless double beta decay of 130Te. Dedicated production lines for raw material synthesis, crystal growth and surface processing were built compliant with radio-purity constraints specific to rare event physics experiments. High sensitivity measurements of radio-isotope concentrations in raw materials, reactants, consuma…
▽ More
High purity TeO2 crystals are produced to be used for the search for the neutrinoless double beta decay of 130Te. Dedicated production lines for raw material synthesis, crystal growth and surface processing were built compliant with radio-purity constraints specific to rare event physics experiments. High sensitivity measurements of radio-isotope concentrations in raw materials, reactants, consumables, ancillaries and intermediary products used for TeO2 crystals production are reported. Production and certification protocols are presented and resulting ready-to-use TeO2 crystals are described.
△ Less
Submitted 20 May, 2010;
originally announced May 2010.
