-
Dynamic Jahn-Teller effect in the strong spin-orbit coupling regime
Authors:
Ivica Zivkovic,
Jian-Rui Soh,
Oleg Malanyuk,
Ravi Yadav,
Federico Pisani,
Aria M. Tehrani,
Davor Tolj,
Jana Pasztorova,
Daigorou Hirai,
Yuan Wei,
Wenliang Zhang,
Carlos Galdino,
Tianlun Yu,
Kenji Ishii,
Albin Demuer,
Oleg V. Yazyev,
Thorsten Schmitt,
Henrik M. Ronnow
Abstract:
Exotic quantum phases, arising from a complex interplay of charge, spin, lattice and orbital degrees of freedom, are of immense interest to a wide research community. A well-known example of such an entangled behavior is the Jahn-Teller effect, where the lifting of orbital degeneracy proceeds through lattice distortions, often accompanied by ordering of spins and metal-insulator transitions. Stati…
▽ More
Exotic quantum phases, arising from a complex interplay of charge, spin, lattice and orbital degrees of freedom, are of immense interest to a wide research community. A well-known example of such an entangled behavior is the Jahn-Teller effect, where the lifting of orbital degeneracy proceeds through lattice distortions, often accompanied by ordering of spins and metal-insulator transitions. Static distortions, including cooperative behavior, have been associated with colossal magneto-resistance, multiferroicity, high-$T_\mathrm{C}$ superconductivity and other correlated phenomena. Realizations of the dynamic Jahn-Teller effect, on the other hand, are scarce since the preservation of vibronic symmetries requires subtle tuning of the local environment. Here we demonstrate that a highly-symmetrical 5d$^1$ double perovskite Ba$_2$MgReO$_6$, comprising of a 3D array of isolated ReO$_6$ octahedra, fulfils these requirements, resulting in a unique case of a dynamic Jahn-Teller system with strong spin-orbit coupling. Thermodynamic and resonant inelastic x-ray scattering experiments undoubtedly show that the Jahn-Teller instability leads to a ground-state doublet, invoking a paradigm shift for this family of compounds. The restoration of vibronic degrees of freedom arises from a quantum-mechanical zero-point motion, as revealed by detailed quantum chemistry calculations. The dynamic state of ReO$_6$ octahedra persists down to the lowest temperatures, where a multipolar order sets in, allowing for investigations of the interplay between a dynamic JT effect and strongly correlated electron behavior.
△ Less
Submitted 2 September, 2024;
originally announced September 2024.
-
Non-Reciprocal Transport of Thermally-Generated Magnons
Authors:
M. Cosset-Chéneau,
S. H. Tirion,
X. Y. Wei,
J. Ben Youssef,
B. J. van Wees
Abstract:
We demonstrate the non-reciprocity of electrically and thermally-generated incoherent magnon transport using the magnetization direction of a Py wire placed on top of an ultrathin YIG film. We show that the transport properties of thermally-generated magnons under a Py wire depends on the relative orientation between the temperature gradient and the Py-magnetization direction. The symmetries of th…
▽ More
We demonstrate the non-reciprocity of electrically and thermally-generated incoherent magnon transport using the magnetization direction of a Py wire placed on top of an ultrathin YIG film. We show that the transport properties of thermally-generated magnons under a Py wire depends on the relative orientation between the temperature gradient and the Py-magnetization direction. The symmetries of this non-reciprocal magnon transport match with those predicted by the remote dipolar interaction between YIG and Py magnons, controlled by the chirality of the YIG magnon dipolar stray fields. We also show that the directional magnon generation by the spin Seebeck effect from the Py wire displays the symmetries expected from the chiral spin Seebeck effect.
△ Less
Submitted 28 August, 2024;
originally announced August 2024.
-
First-principles investigation of elastic, vibrational, and thermodynamic properties of kagome metals CsM$_3$Te$_5$ (M = Ti, Zr, Hf)
Authors:
Yifan Wei,
Arjyama Bordoloi,
Chaon-En,
Chuang,
Sobhit Singh
Abstract:
Kagome metals are a unique class of quantum materials characterized by their distinct atomic lattice arrangement, featuring interlocking triangles and expansive hexagonal voids. These lattice structures impart exotic properties, including superconductivity, interaction-driven topological many-body phenomena, and magnetism, among others. The kagome metal CsM3Te5 (where M = Ti, Zr, or Hf) exhibits b…
▽ More
Kagome metals are a unique class of quantum materials characterized by their distinct atomic lattice arrangement, featuring interlocking triangles and expansive hexagonal voids. These lattice structures impart exotic properties, including superconductivity, interaction-driven topological many-body phenomena, and magnetism, among others. The kagome metal CsM3Te5 (where M = Ti, Zr, or Hf) exhibits both superconductivity and nontrivial topological electronic properties, offering a promising platform for exploring topological superconductivity. This study employs first-principles density functional theory calculations to systematically analyze the elastic, mechanical, vibrational, thermodynamic, and electronic properties of CsM3Te5 (M = Ti, Zr, Hf). Our calculations reveal that the studied compounds - CsTi3Te5, CsZr3Te5, and CsHf3Te5 - are ductile metals with elastic properties akin to the hexagonal Bi and Sb, with average elastic constants, including a bulk modulus of 27 GPa, a shear modulus of 11 GPa, and Young's modulus of 29 GPa. We observe peculiar dispersionless, flat, phonon branches in the vibrational spectra of these metals. Additionally, we thoroughly analyze the symmetries of the zone-center phonon eigenvectors and predict vibrational fingerprints of the Raman- and infrared-active phonon modes. The analysis of thermodynamic properties reveals the Einstein temperature for CsTi3Te5, CsZr3Te5, and CsHf3Te5 to be 66, 54, and 53 K, respectively. Our orbital-decomposed electronic structure calculations reveal significant in-plane steric interactions and multiple Dirac band crossings near the Fermi level. We further investigate the role of spin-orbit coupling effect on the studied properties. This theoretical investigation sheds light on the intriguing quantum behaviour of kagome metals and provides valuable insights for their potential applications in future technologies.
△ Less
Submitted 20 August, 2024;
originally announced August 2024.
-
Layer-dependent electromechanical response in twisted graphene moiré superlattices
Authors:
Hanhao Zhang,
Yuanhao Wei,
Yuhao Li,
Shengsheng Lin,
Jiarui Wang,
Takashi Taniguchi,
Kenji Watanabe,
Jiangyu Li,
Yi Shi,
Xinran Wang,
Yan Shi,
Zaiyao Fei
Abstract:
The coupling of mechanical deformation and electrical stimuli at the nanoscale has been a subject of intense investigation in the realm of materials science. Recently, twisted van der Waals (vdW) materials have emerged as a platform to explore exotic quantum states. These states are intimately tied to the formation of moiré superlattices, which can be visualized directly exploiting the electromech…
▽ More
The coupling of mechanical deformation and electrical stimuli at the nanoscale has been a subject of intense investigation in the realm of materials science. Recently, twisted van der Waals (vdW) materials have emerged as a platform to explore exotic quantum states. These states are intimately tied to the formation of moiré superlattices, which can be visualized directly exploiting the electromechanical response. However, the origin of the response, even in twisted bilayer graphene (tBLG), remains unsettled. Here, employing lateral piezoresponse force microscopy (LPFM), we investigate the electromechanical responses of marginally twisted graphene moiré superlattices with different layer thicknesses. We observe distinct LPFM amplitudes and spatial profiles in tBLG and twisted monolayer-bilayer graphene (tMBG), exhibiting effective in-plane piezoelectric coefficients of 0.05 pm/V and 0.35 pm/V, respectively. Force tuning experiments further underscore a marked divergence in their responses. The contrasting behaviors suggest different electromechanical couplings in tBLG and tMBG. In tBLG, the response near the domain walls is attributed to the flexoelectric effect, while in tMBG, the behaviors can be comprehended within the context of piezoelectric effect. Our results not only provide insights to electromechanical and corporative effects in twisted vdW materials with different stacking symmetries, but may also show their potential for engineering them at the nanoscale.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Rayleigh surface waves of extremal elastic materials
Authors:
Yu Wei,
Yi Chen,
Wen Cheng,
Xiaoning Liu,
Gengkai Hu
Abstract:
Extremal elastic materials here refer to a specific class of elastic materials whose elastic matrices exhibit one or more zero eigenvalues, resulting in soft deformation modes that, in principle, cost no energy. They can be approximated through artificially designed solid microstructures. Extremal elastic materials have exotic bulk wave properties unavailable with conventional solids due to the so…
▽ More
Extremal elastic materials here refer to a specific class of elastic materials whose elastic matrices exhibit one or more zero eigenvalues, resulting in soft deformation modes that, in principle, cost no energy. They can be approximated through artificially designed solid microstructures. Extremal elastic materials have exotic bulk wave properties unavailable with conventional solids due to the soft modes, offering unprecedented opportunities for manipulating bulk waves, e.g., acting as phonon polarizers for elastic waves or invisibility cloaks for underwater acoustic waves. Despite their potential, Rayleigh surface waves, crucially linked to bulk wave behaviors of such extremal elastic materials, have largely remained unexplored so far. In this paper, we theoretically investigate the propagation of Rayleigh waves in extremal elastic materials based on continuum theory and verify our findings with designed microstructure metamaterials based on pantographic structures. Dispersion relations and polarizations of Rayleigh waves in extremal elastic materials are derived, and the impact of higher order gradient effects is also investigated by using strain gradient theory. This study provides a continuum model for exploring surface waves in extremal elastic materials and may stimulate applications of extremal elastic materials for controlling surface waves.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Spin chirality engineering induced giant topological Hall effect in a kagome magnet
Authors:
Wei Xia,
Shihao Zhang,
Jian Yuan,
Yurui Wei,
Haonan Wang,
Hong Du,
Xiangqi Liu,
Jiangteng Guo,
Zicheng Tao,
Ke Qu,
Xia Wang,
Xuerong Liu,
Wenbo Wang,
Jinguang Cheng,
Yulin Chen,
Jianpeng Liu,
Ruidan Zhong,
Xuewen Fu,
Zhenzhong Yang,
Yanfeng Guo
Abstract:
The ferrimagnet TbMn6Sn6 has attracted vast attention, because its pristine Mn kagome lattice with strong spin-orbit coupling and out-of-plane Tb-Mn exchange supports quantum-limit Chern topological magnetism which can be described by the simple spinless Haldane model. We unveil herein that engineering the pristine kagome lattice through partial replacement of Mn by nonmagnetic Cr which tends to c…
▽ More
The ferrimagnet TbMn6Sn6 has attracted vast attention, because its pristine Mn kagome lattice with strong spin-orbit coupling and out-of-plane Tb-Mn exchange supports quantum-limit Chern topological magnetism which can be described by the simple spinless Haldane model. We unveil herein that engineering the pristine kagome lattice through partial replacement of Mn by nonmagnetic Cr which tends to concentrate into the single Mn1 layer in a unit cell breaks the collinear configuration of Mn spins and reduces the D6h point group symmetry to the C2 one. The nearly isolated Tb networks result in easily polarized Tb spins even under a weak magnetic field, and simultaneously, different spin chirality of the Tb-Mn1-Mn1 and Mn1-Mn1-Mn1. Such a peculiar spin structure leads to a plateau-like topological Hall effect with a record resistivity of 19.1 μOhm cm among bulk systems. Our direct visualization of the domain-wall structure and its evolution under external magnetic field fully support the picture, thus highlighting the pivotal role of broken kagome lattice symmetry in generating the peculiar spin chirality in real space. Our results set a paradigm for exploration of exotic properties in kagome topological magnets and would be a proof-of-principle strategy for investigating the correlation between magnetism and exotic topological properties in kagome lattice.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Spin-orbital excitations encoding the magnetic phase transition in the van der Waals antiferromagnet FePS$_{3}$
Authors:
Yuan Wei,
Yi Tseng,
Hebatalla Elnaggar,
Wenliang Zhang,
Teguh Citra Asmara,
Eugenio Paris,
Gabriele Domaine,
Vladimir N. Strocov,
Luc Testa,
Virgile Favre,
Mario Di Luca,
Mitali Banerjee,
Andrew R. Wildes,
Frank M. F. de Groot,
Henrik M. Ronnow,
Thorsten Schmitt
Abstract:
In the rich phases of van der Waals (vdW) materials featuring intertwined electronic order and collective phenomena, characterizing elementary dynamics that entail the low-energy Hamiltonian and electronic degrees of freedom is of paramount importance. Here we performed resonant inelastic X-ray scattering (RIXS) to elaborate the spin-orbital ground and excited states of the vdW antiferromagnetic i…
▽ More
In the rich phases of van der Waals (vdW) materials featuring intertwined electronic order and collective phenomena, characterizing elementary dynamics that entail the low-energy Hamiltonian and electronic degrees of freedom is of paramount importance. Here we performed resonant inelastic X-ray scattering (RIXS) to elaborate the spin-orbital ground and excited states of the vdW antiferromagnetic insulator FePS$_{3}$, as well as their relation to magnetism. We observed the spectral enhancement of spin-orbital multiplet transitions about $\sim$ 100 and $\sim$ 220 meV, as well as quasielastic response, when entering the zig-zag antiferromagnetic phase, where the spectral changes develop an order-parameter-like evolution with temperature. By comparing with ligand field theory calculations, we discovered the essential role of trigonal lattice distortion and negative metal-ligand charge-transfer to account for these emergent excitations. Such spectral profiles are further examined upon confinement by mechanical exfoliation. We reveal their spectral robustness down to the few atomic layer limit, in accordance with the persistent antiferromagnetic state previously reported in optical measurements. Our study demonstrates the versatile RIXS capability that resolves magneto-crystalline anisotropy and charge-transfer energetics. These provide the crucial insight to understand how the spontaneous magnetic symmetry-breaking stabilizes in the quasi-two-dimensional limit for the vdW magnet FePS$_{3}$.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Direct visualization of the impurity occupancy roadmap in Ni-substituted van der Waals ferromagnet Fe3GaTe2
Authors:
Jian Yuan,
Haonan Wang,
Xiaofei Hou,
Binshuo Zhang,
Yurui Wei,
Jiangteng Guo,
Lu Sun,
Zhenhai Yu,
Zhikai Li,
Xiangqi Liu,
Wei Xia,
Xia Wang,
Xuerong Liu,
Yulin Chen,
Shihao Zhang,
Xuewen Fu,
Ke Qu,
Zhenzhong Yang,
Yanfeng Guo
Abstract:
Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadma…
▽ More
Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadmap for Ni substitution in Fe3GaTe2, a van der Waals ferromagnet with the Curie temperature TC even reaching ~ 380 K. The results unambiguously reveal that in (Fe1-xNix)3GaTe2, Ni atoms initially form an van der Waals interlayer gap Ni3 sites when x < 0.1, and then gradually occupy the Fe2 sites. After replacing the Fe2 sites at x of ~ 0.75, they start to substitute for the Fe1 sites and eventually realize a full occupation at x = 1.0. Accordingly, TC and saturation magnetic moments of (Fe1-xNix)3GaTe2 both show nonlinear decrease, which is tightly tied to the Ni occupancy order as well as the different roles of Ni3, Fe1 and Fe2 sites in the spin Hamiltonian. The results not only yield fruitful insights into the essential roles of different Fe sites in producing the above room temperature high TC, but also set a paradigm for future impurity substitution study on other quantum materials.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
3D deep learning for enhanced atom probe tomography analysis of nanoscale microstructures
Authors:
Jiwei Yu,
Zhangwei Wang,
Aparna Saksena,
Shaolou Wei,
Ye Wei,
Timoteo Colnaghi,
Andreas Marek,
Markus Rampp,
Min Song,
Baptiste Gault,
Yue Li
Abstract:
Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineering materials. Atom probe tomography (APT), known for its exceptional combination of chemical sensitivity and sub-nanometer resolution, primaril…
▽ More
Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineering materials. Atom probe tomography (APT), known for its exceptional combination of chemical sensitivity and sub-nanometer resolution, primarily identifies microstructures through compositional segregations. However, this fails when there is no significant segregation, as can be the case for LCOs and stacking faults. Here, we introduce a 3D deep learning approach, AtomNet, designed to process APT point cloud data at the single-atom level for nanoscale microstructure extraction, simultaneously considering compositional and structural information. AtomNet is showcased in segmenting L12-type nanoprecipitates from the matrix in an AlLiMg alloy, irrespective of crystallographic orientations, which outperforms previous methods. AtomNet also allows for 3D imaging of L10-type LCOs in an AuCu alloy, a challenging task for conventional analysis due to their small size and subtle compositional differences. Finally, we demonstrate the use of AtomNet for revealing 2D stacking faults in a Co-based superalloy, without any defected training data, expanding the capabilities of APT for automated exploration of hidden microstructures. AtomNet pushes the boundaries of APT analysis, and holds promise in establishing precise quantitative microstructure-property relationships across a diverse range of metallic materials.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Quantum geometric tensor and the topological characterization of the extended Su-Schrieffer-Heeger model
Authors:
Xiang-Long Zeng,
Wen-Xi Lai,
Yi-Wen Wei,
Yu-Quan Ma
Abstract:
We investigate the quantum metric and topological Euler number in a cyclically modulated Su-Schrieffer-Heeger (SSH) model with long-range hopping terms. By computing the quantum geometry tensor, we derive exactly expressions for the quantum metric and Berry curvature of the energy band electrons, and we obtain the phase diagram of the model marked by the first Chern number. Furthermore, we also ob…
▽ More
We investigate the quantum metric and topological Euler number in a cyclically modulated Su-Schrieffer-Heeger (SSH) model with long-range hopping terms. By computing the quantum geometry tensor, we derive exactly expressions for the quantum metric and Berry curvature of the energy band electrons, and we obtain the phase diagram of the model marked by the first Chern number. Furthermore, we also obtain the topological Euler number of the energy band based on the Gauss-Bonnet theorem on the topological characterization of the closed Bloch states manifold in the first Brillouin zone. However, some regions where the Berry curvature is identically zero in the first Brillouin zone results in the degeneracy of the quantum metric, which leads to ill-defined non-integer topological Euler numbers. Nevertheless, the non-integer "Euler number" provides valuable insights and provide an upper bound for absolute values of the Chern numbers.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Multipartite edge modes and tensor networks
Authors:
Chris Akers,
Ronak M. Soni,
Annie Y. Wei
Abstract:
Holographic tensor networks model AdS/CFT, but so far they have been limited by involving only systems that are very different from gravity. Unfortunately, we cannot straightforwardly discretize gravity to incorporate it, because that would break diffeomorphism invariance. In this note, we explore a resolution. In low dimensions gravity can be written as a topological gauge theory, which can be di…
▽ More
Holographic tensor networks model AdS/CFT, but so far they have been limited by involving only systems that are very different from gravity. Unfortunately, we cannot straightforwardly discretize gravity to incorporate it, because that would break diffeomorphism invariance. In this note, we explore a resolution. In low dimensions gravity can be written as a topological gauge theory, which can be discretized without breaking gauge-invariance. However, new problems arise. Foremost, we now need a qualitatively new kind of "area operator," which has no relation to the number of links along the cut and is instead topological. Secondly, the inclusion of matter becomes trickier. We successfully construct a tensor network both including matter and with this new type of area. Notably, while this area is still related to the entanglement in "edge mode" degrees of freedom, the edge modes are no longer bipartite entangled pairs. Instead they are highly multipartite. Along the way, we calculate the entropy of novel subalgebras in a particular topological gauge theory. We also show that the multipartite nature of the edge modes gives rise to non-commuting area operators, a property that other tensor networks do not exhibit.
△ Less
Submitted 19 June, 2024; v1 submitted 4 April, 2024;
originally announced April 2024.
-
Emergence of interfacial magnetism in strongly-correlated nickelate-titanate superlattices
Authors:
Teguh Citra Asmara,
Robert J. Green,
Andreas Suter,
Yuan Wei,
Wenliang Zhang,
Grant Harris,
Yi Tseng,
Tianlun Yu,
Davide Betto,
Mirian Garcia-Fernandez,
Stefano Agrestini,
Yannick Maximilian Klein,
Neeraj Kumar,
Carlos William Galdino,
Zaher Salman,
Thomas Prokscha,
Marisa Medarde,
Elisabeth Müller,
Yona Soh,
Nicholas B. Brookes,
Ke-Jin Zhou,
Milan Radovic,
Thorsten Schmitt
Abstract:
Strongly-correlated transition-metal oxides are widely known for their various exotic phenomena. This is exemplified by rare-earth nickelates such as LaNiO$_{3}$, which possess intimate interconnections between their electronic, spin, and lattice degrees of freedom. Their properties can be further enhanced by pairing them in hybrid heterostructures, which can lead to hidden phases and emergent phe…
▽ More
Strongly-correlated transition-metal oxides are widely known for their various exotic phenomena. This is exemplified by rare-earth nickelates such as LaNiO$_{3}$, which possess intimate interconnections between their electronic, spin, and lattice degrees of freedom. Their properties can be further enhanced by pairing them in hybrid heterostructures, which can lead to hidden phases and emergent phenomena. An important example is the LaNiO$_{3}$/LaTiO$_{3}$ superlattice, where an interlayer electron transfer has been observed from LaTiO$_{3}$ into LaNiO$_{3}$ and is predicted to result in a high-spin state. However, macroscopic emergence of magnetic order has so far not been observed. Here, by using muon spin rotation, x-ray absorption, and resonant inelastic x-ray scattering, we present direct evidence of an emergent antiferromagnetic order with high magnon energy and exchange interactions at the LaNiO$_{3}$/LaTiO$_{3}$ interface. As the magnetism is purely interfacial, a single LaNiO$_{3}$/LaTiO$_{3}$ interface can essentially behave as an atomically thin quasi-two-dimensional antiferromagnet, potentially allowing its technological utilisation in advanced spintronic devices. Furthermore, its strong quasi-two-dimensional magnetic correlations and orbitally-polarized planar ligand holes make its electronic and magnetic configurations resemble the precursor states of superconducting cuprates and nickelates, but with an S $\rightarrow$ 1 spin state instead.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Roadmap on Data-Centric Materials Science
Authors:
Stefan Bauer,
Peter Benner,
Tristan Bereau,
Volker Blum,
Mario Boley,
Christian Carbogno,
C. Richard A. Catlow,
Gerhard Dehm,
Sebastian Eibl,
Ralph Ernstorfer,
Ádám Fekete,
Lucas Foppa,
Peter Fratzl,
Christoph Freysoldt,
Baptiste Gault,
Luca M. Ghiringhelli,
Sajal K. Giri,
Anton Gladyshev,
Pawan Goyal,
Jason Hattrick-Simpers,
Lara Kabalan,
Petr Karpov,
Mohammad S. Khorrami,
Christoph Koch,
Sebastian Kokott
, et al. (36 additional authors not shown)
Abstract:
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) a…
▽ More
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research.
△ Less
Submitted 1 May, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Rational Design of Molybdenum Transition-Metal subnanoclusters catalysts with Particle Swarm Optimization
Authors:
Yao Wei,
Alejandro Santana-Bonilla,
Lev Kantorovich
Abstract:
The development of novel sub-nanometer clusters (SNCs) catalysts with superior catalytic performance depends on the precise control of clusters' atomistic sizes, shapes, and accurate deposition onto surfaces. Recent advancements in manufacturing and characterization techniques have paved the way for the production and atomic resolution characterization of transition-metal SNCs catalysts, positioni…
▽ More
The development of novel sub-nanometer clusters (SNCs) catalysts with superior catalytic performance depends on the precise control of clusters' atomistic sizes, shapes, and accurate deposition onto surfaces. Recent advancements in manufacturing and characterization techniques have paved the way for the production and atomic resolution characterization of transition-metal SNCs catalysts, positioning them as a promising new class of materials for this application. Nevertheless, the intrinsic complexity of the adsorption process complicates the ability to achieve an atomistic understanding of the most relevant structure-reactivity relationships hampering the rational design of novel catalytic materials. In most cases, existing computational approaches rely on just a few structures to conclude clusters' reactivity thereby neglecting the complexity of the existing energy landscapes thus leading to insufficient sampling and, most likely, unreliable predictions. Moreover, modelling of the actual experimental procedure that is responsible for the deposition of SNCs on surfaces is often not done even though in some cases this procedure may enhance the significance of certain (e.g., metastable) adsorption geometries. This study proposes a novel approach that utilizes particle swarm optimization (PSO) method, in conjunction with ab-initio calculations, to predict the most relevant SNCs structures on a surface in beam experiments, and consequently their reactivity. To illustrate the main steps of our approach, we consider the deposition of Molybdenum SNC of 6 Mo atoms on a free-standing graphene surface, as well as their catalytic properties concerning the CO molecule dissociation reaction. This study demonstrates the feasibility of the PSO technique for studying catalyst transition-metal SNCs and establishes a reliable procedure for performing theoretical rational design predictions.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Aperiodic-quasiperiodic-periodic properties and topological transitions in twisted nested Moiré patterns
Authors:
Peng Peng,
Yuchen Peng,
Aoqian Shi,
Xiaogen Yi,
Yizhou Wei,
Jianjun Liu
Abstract:
The Moiré patterns generated by altering the structural parameters in a two or more layers of periodic materials, including single-layer structure, interlayer stacking, and twisting parameters, exhibit prosperous topological physical properties. However, the intricate characteristics of twisted nested Moiré patterns and their relationship with topological transitions remain unclear. In this Letter…
▽ More
The Moiré patterns generated by altering the structural parameters in a two or more layers of periodic materials, including single-layer structure, interlayer stacking, and twisting parameters, exhibit prosperous topological physical properties. However, the intricate characteristics of twisted nested Moiré patterns and their relationship with topological transitions remain unclear. In this Letter, based on the proposed twisted nested photonic crystal (TNPC), we derive its spatial geometric functions (SGFs), aperiodic-quasiperiodic-periodic properties in twisted nested Moiré patterns, and the SSHφ Hamiltonian. We reveal the intrinsic correlation between twisted nested Moiré patterns and topological transitions, obtaining higher-order topological states (HOTSs) with C2z symmetry. This work will provide theoretical references for the design and application of twisted topological PC and their devices.
△ Less
Submitted 17 February, 2024; v1 submitted 28 January, 2024;
originally announced January 2024.
-
Nematic charge-density-wave correlations in FeSe$_{1-x}$S$_{x}$
Authors:
Ruixian Liu,
Wenliang Zhang,
Yuan Wei,
Zhen Tao,
Teguh C. Asmara,
Vladimir N. Strocov,
Thorsten Schmitt,
Xingye Lu
Abstract:
The occurrence of charge-density-wave (CDW) order is a common thread in the phase diagram of cuprate high-transition-temperature ($T_c$) superconductors. In iron-based superconductors (FeSCs), nematic order and fluctuations play a decisive role in driving other emergent orders. CDW order has been observed by scanning tunneling microscopy for various FeSCs such as FeSe thin films, uniaxially strain…
▽ More
The occurrence of charge-density-wave (CDW) order is a common thread in the phase diagram of cuprate high-transition-temperature ($T_c$) superconductors. In iron-based superconductors (FeSCs), nematic order and fluctuations play a decisive role in driving other emergent orders. CDW order has been observed by scanning tunneling microscopy for various FeSCs such as FeSe thin films, uniaxially strained LiFeAs, and tetragonal FeSe$_{0.81}$S$_{0.19}$. However, it remains elusive if the CDW in these materials is a bulk phenomenon as well as if and how it intertwines with the electronic nematicity. Using energy-resolved resonant X-ray scattering at the Fe-L$_3$ edge, we report the discovery of a local-strain-induced incommensurate isotropic CDW order in FeSe$_{0.82}$S$_{0.18}$. A highly anisotropic CDW response under uniaxial strain unambiguously manifests that the CDW is directly coupled to the nematicity. Transforming part of Fe$^{2+}$ to Fe$^{3+}$ on the surface of FeSe$_{1-x}$S$_{x}$ reveals that the same isotropic CDW can be induced, enhanced, and stabilized in the whole nematic regime measured ($x=0-0.19$). As Fe$^{3+}$ can create local lattice distortions on the surface, the CDW could arise from the interaction between the local strain around Fe$^{3+}$ and the nematic electron correlations. Our experimental observation of a local-strain-induced CDW gives vital information for understanding the interplay between electron correlations and the electronic nematicity in FeSCs.
△ Less
Submitted 21 December, 2023; v1 submitted 19 December, 2023;
originally announced December 2023.
-
Tensor network renormalization: application to dynamic correlation functions and non-hermitian systems
Authors:
Ying-Jie Wei,
Zheng-Cheng Gu
Abstract:
In recent years, tensor network renormalization (TNR) has emerged as an efficient and accurate method for studying (1+1)D quantum systems or 2D classical systems using real-space renormalization group (RG) techniques. One notable application of TNR is its ability to extract central charge and conformal scaling dimensions for critical systems. In this paper, we present the implementation of the Loo…
▽ More
In recent years, tensor network renormalization (TNR) has emerged as an efficient and accurate method for studying (1+1)D quantum systems or 2D classical systems using real-space renormalization group (RG) techniques. One notable application of TNR is its ability to extract central charge and conformal scaling dimensions for critical systems. In this paper, we present the implementation of the Loop-TNR algorithm, which allows for the computation of dynamical correlation functions. Our algorithm goes beyond traditional approaches by not only calculating correlations in the spatial direction, where the separation is an integer, but also in the temporal direction, where the time difference can contain decimal values. Our algorithm is designed to handle both imaginary-time and real-time correlations, utilizing a tensor network representation constructed from a path-integral formalism. Additionally, we highlight that the Loop-TNR algorithm can also be applied to investigate critical properties of non-Hermitian systems, an area that was previously inaccessible using density matrix renormalization group(DMRG) and matrix product state(MPS) based algorithms.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
Spectral evidence for Dirac spinons in a kagome lattice antiferromagnet
Authors:
Zhenyuan Zeng,
Chengkang Zhou,
Honglin Zhou,
Lankun Han,
Runze Chi,
Kuo Li,
Maiko Kofu,
Kenji Nakajima,
Yuan Wei,
Wenliang Zhang,
Daniel G. Mazzone,
Zi Yang Meng,
Shiliang Li
Abstract:
Emergent quasiparticles with a Dirac dispersion in condensed matter systems can be described by the Dirac equation for relativistic electrons, in analogy with Dirac particles in high-energy physics. For example, electrons with a Dirac dispersion have been intensively studied in electronic systems such as graphene and topological insulators. However, charge is not a prerequisite for Dirac fermions,…
▽ More
Emergent quasiparticles with a Dirac dispersion in condensed matter systems can be described by the Dirac equation for relativistic electrons, in analogy with Dirac particles in high-energy physics. For example, electrons with a Dirac dispersion have been intensively studied in electronic systems such as graphene and topological insulators. However, charge is not a prerequisite for Dirac fermions, and the emergence of Dirac fermions without charge degree of freedom has been theoretically predicted to be realized in Dirac quantum spin liquids. These quasiparticles carry a spin of 1/2 but are charge-neutral, and so are called spinons. Here we show that the spin excitations of a kagome antiferromagnet, YCu$_3$(OD)$_6$Br$_2$[Br$_{0.33}$(OD)$_{0.67}$], are conical with a spin continuum inside, which is consistent with the convolution of two Dirac spinons. The predictions of a Dirac spin liquid model with a spinon velocity obtained from the spectral measurements are in agreement with the low-temperature specific heat of the sample. Our results thus provide spectral evidence for the Dirac quantum spin liquid state emerging in this kagome lattice antiferromagnet. However, the locations of the conical spin excitations differ from those calculated by the nearest neighbor Heisenberg model, suggesting the Dirac spinons have an unexpected origin.
△ Less
Submitted 21 May, 2024; v1 submitted 17 October, 2023;
originally announced October 2023.
-
A comprehensive exploration of structural and electronic properties of Molybdenum clusters
Authors:
Yao Wei,
Lev Kantorovich
Abstract:
Molybdenum clusters, characterised by their unique structure and intriguing catalytic properties, have gained significant attention in recent years. In several existing studies density functional theory (DFT) methods have been used to find the lowest energy Mo clusters and explore their electronic and magnetic structure. In all cases, with the exception of a single recent study, where a genetic al…
▽ More
Molybdenum clusters, characterised by their unique structure and intriguing catalytic properties, have gained significant attention in recent years. In several existing studies density functional theory (DFT) methods have been used to find the lowest energy Mo clusters and explore their electronic and magnetic structure. In all cases, with the exception of a single recent study, where a genetic algorithm was employed, initial geometries of the clusters, prior to geometry optimisation, were chosen using heuristic approaches based on symmetry considerations and known structures. DFT calculations were performed using different types of pseudopotentials, from hard to soft, and different types of basis sets. However, no comprehensive study has yet been done in which a DFT method with the best control on its precision would be complemented by a reliable global minimum search method to find the lowest energy Mo clusters. In this work, we employ a combination of a plane wave-based DFT method and \emph{ab initio} random structure searching (AIRSS) technique to find the lowest energy clusters of up to 10 Mo atoms. In each case, the search has been performed for clusters with different spin multiplicities, which enabled us to explore their magnetic structure. The results are compared for both hard and soft pseudopotentials stressing the importance of treating more electrons explicitly, in agreement with some of the previous studies. For most of the low-energy magnetic structures found, we investigate the distribution of their spin densities, and for all low energy clusters, we confirm their stability by calculating their phonon structure. Finally, free energies of the Mo clusters, within the quasi-harmonic approximation, are also calculated and discussed.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
Petz recovery from subsystems in conformal field theory
Authors:
Shreya Vardhan,
Annie Y. Wei,
Yijian Zou
Abstract:
We probe the multipartite entanglement structure of the vacuum state of a CFT in 1+1 dimensions, using recovery operations that attempt to reconstruct the density matrix in some region from its reduced density matrices on smaller subregions. We use an explicit recovery channel known as the twirled Petz map, and study distance measures such as the fidelity, relative entropy, and trace distance betw…
▽ More
We probe the multipartite entanglement structure of the vacuum state of a CFT in 1+1 dimensions, using recovery operations that attempt to reconstruct the density matrix in some region from its reduced density matrices on smaller subregions. We use an explicit recovery channel known as the twirled Petz map, and study distance measures such as the fidelity, relative entropy, and trace distance between the original state and the recovered state. One setup we study in detail involves three contiguous intervals $A$, $B$ and $C$ on a spatial slice, where we can view these quantities as measuring correlations between $A$ and $C$ that are not mediated by the region $B$ that lies between them. We show that each of the distance measures is both UV finite and independent of the operator content of the CFT, and hence depends only on the central charge and the cross-ratio of the intervals. We evaluate these universal quantities numerically using lattice simulations in critical spin chain models, and derive their analytic forms in the limit where $A$ and $C$ are close using the OPE expansion. In the case where $A$ and $C$ are far apart, we find a surprising non-commutativity of the replica trick with the OPE limit. For all values of the cross-ratio, the fidelity is strictly better than a general information-theoretic lower bound in terms of the conditional mutual information. We also compare the mutual information between various subsystems in the original and recovered states, which leads to a more qualitative understanding of the differences between them. Further, we introduce generalizations of the recovery operation to more than three adjacent intervals, for which the fidelity is again universal with respect to the operator content.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Nematic spin correlations pervading the phase diagram of FeSe$_{1-x}$S$_{x}$
Authors:
Ruixian Liu,
Wenliang Zhang,
Yuan Wei,
Zhen Tao,
Teguh C. Asmara,
Yi Li,
Vladimir N. Strocov,
Rong Yu,
Qimiao Si,
Thorsten Schmitt,
Xingye Lu
Abstract:
We use resonant inelastic X-ray scattering (RIXS) at the Fe-L$_3$ edge to study the spin excitations of uniaxial-strained and unstrained FeSe$_{1-x}$S$_{x}$ ($0\leq x\leq0.21$) samples. The measurements on unstrained samples reveal dispersive spin excitations in all doping levels, which show only minor doping dependence in energy dispersion, lifetime, and intensity, indicating that high-energy spi…
▽ More
We use resonant inelastic X-ray scattering (RIXS) at the Fe-L$_3$ edge to study the spin excitations of uniaxial-strained and unstrained FeSe$_{1-x}$S$_{x}$ ($0\leq x\leq0.21$) samples. The measurements on unstrained samples reveal dispersive spin excitations in all doping levels, which show only minor doping dependence in energy dispersion, lifetime, and intensity, indicating that high-energy spin excitations are only marginally affected by sulfur doping. RIXS measurements on uniaxial-strained samples reveal that the high-energy spin-excitation anisotropy observed previously in FeSe is also present in the doping range $0< x\leq0.21$ of FeSe$_{1-x}$S$_{x}$. The spin-excitation anisotropy persists to a high temperature up to $T>200$ K in $x=0.18$ and reaches a maximum around the nematic quantum critical doping ($x_c\approx0.17$). Since the spin-excitation anisotropy directly reflects the existence of nematic spin correlations, our results indicate that high-energy nematic spin correlations pervade the regime of nematicity in the phase diagram and are enhanced by the nematic quantum criticality. These results emphasize the essential role of spin fluctuations in driving electronic nematicity and open the door for uniaxial strain tuning of spin excitations in quantum materials hosting strong magnetoelastic coupling and electronic nematicity.
△ Less
Submitted 16 July, 2023;
originally announced July 2023.
-
Linear displacement current solely driven by the quantum metric
Authors:
Longjun Xiang,
Bin Wang,
Yadong Wei,
Zhenhua Qiao,
Jian Wang
Abstract:
Quantum metric and Berry curvature are the real part and imaginary part of the quantum geometric tensor, respectively. The T-odd (T: time-reversal) nonlinear Hall effect driven by the quantum metric dipole, recently confirmed in Science 381, 181 (2023) and Nature 621, 487 (2023), established the geometric duality to the T-even nonlinear Hall effect that driven by the Berry curvature dipole. Intere…
▽ More
Quantum metric and Berry curvature are the real part and imaginary part of the quantum geometric tensor, respectively. The T-odd (T: time-reversal) nonlinear Hall effect driven by the quantum metric dipole, recently confirmed in Science 381, 181 (2023) and Nature 621, 487 (2023), established the geometric duality to the T-even nonlinear Hall effect that driven by the Berry curvature dipole. Interestingly, a similar geometric duality between the quantum metric and the Berry curvature, particularly for the linear response of Bloch electrons, has not been established, although the T-odd linear intrinsic anomalous Hall effect (IAHE) solely driven by the Berry curvature has been known for a long time. Herein, we develop the quantum theory for displacement current under an AC electric field. Particularly, we show that the T-even component of the linear displacement current conductivity (LDCC) is solely determined by the quantum metric, by both the response theory and the semiclassical theory. Notably, with symmetry analysis we find that the T-even LDCC can contribute a Hall current in T-invariant systems but with low symmetry, while its longitudinal component is immune to symmetry. Furthermore, employing the Dirac Hamiltonian, we arrive at a $1/μ$ ($μ$: chemical potential) experimental observable enhancement of the displacement current owing to the divergent behavior of quantum metric near Dirac point, similar to the IAHE at Weyl point. Our work reveals the band geometric origin of the linear displacement current and establishes, together with the IAHE, the geometric duality for the linear response of Bloch electrons. Additionally, our work offers the very first intrinsic Hall effect in T-invariant materials, which can not be envisioned in DC transport in both linear and nonlinear regimes.
△ Less
Submitted 6 February, 2024; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Bond polarizability as a probe of local crystal fields in hybrid lead-halide perovskites
Authors:
Yujing Wei,
Artem G. Volosniev,
Dusan Lorenc,
Ayan A. Zhumekenov,
Osman M. Bakr,
Mikhail Lemeshko,
Zhanybek Alpichshev
Abstract:
A rotating organic cation and a dynamically disordered soft inorganic cage are the hallmark features of hybrid organic-inorganic lead-halide perovskites. Understanding the interplay between these two subsystems is a challenging problem but it is this coupling that is widely conjectured to be responsible for the unique behavior of photo-carriers in these materials. In this work, we use the fact tha…
▽ More
A rotating organic cation and a dynamically disordered soft inorganic cage are the hallmark features of hybrid organic-inorganic lead-halide perovskites. Understanding the interplay between these two subsystems is a challenging problem but it is this coupling that is widely conjectured to be responsible for the unique behavior of photo-carriers in these materials. In this work, we use the fact that the polarizability of the organic cation strongly depends on the ambient electrostatic environment to put the molecule forward as a sensitive probe of local crystal fields inside the lattice cell. We measure the average polarizability of the C/N--H bond stretching mode by means of infrared spectroscopy, which allows us to deduce the character of the motion of the cation molecule, find the magnitude of the local crystal field and place an estimate on the strength of the hydrogen bond between the hydrogen and halide atoms. Our results pave the way for understanding electric fields in lead-halide perovskites using infrared bond spectroscopy.
△ Less
Submitted 5 September, 2023; v1 submitted 27 April, 2023;
originally announced April 2023.
-
Gate Electrostatic Controllability Enhancement in Nanotube Gate all Around Field Effect Transistor
Authors:
Laixiang Qin,
Chunlai Li,
Ziang Xie,
Yiqun Wei,
Jin He
Abstract:
Recently, short channel effects (SCE) and power consumption dissipation problems pose big challenges which need imperative actions to be taken to deal with for field effect transistor to further scale down as semiconductor technology enters into sub-10nm technology node. From 3nm technology node and beyond, gate all around field effect transistor steps onto the history stage attributed to its impr…
▽ More
Recently, short channel effects (SCE) and power consumption dissipation problems pose big challenges which need imperative actions to be taken to deal with for field effect transistor to further scale down as semiconductor technology enters into sub-10nm technology node. From 3nm technology node and beyond, gate all around field effect transistor steps onto the history stage attributed to its improved SCE suppressing ability thanks to surrounding gate structure. Herein, we demonstrate the super electrostatic control ability of a double-gated nanotube gate all around field effect transistor (DG NT GAAFET) in comparison with nanotube (NT GAAFET) and nanowire gate all around field effect transistor (NW GAAFET) with the same device parameters designed. Ion boosts of 62% and 57% have been obtained in DG NT GAAFET in comparison with those of NT GAAFET and NW GAAFET. Besides, substantially suppressed SCEs have been obtained in DG NT GAAFET due to enhanced electrostatic control, which are certificated by improved Ioff, SS, and Ion/Ioff ratio obtained. On the other hand, the Ion of NT GAAFET is comparable with that of NW GAA-FET. Whereas, its Ioff is 1 order smaller, and SS is almost 2 times smaller compared with those of NW GAA-FET, manifesting the meliority of nanotube channel structure. In the end, the robustness of nanotube channel structure, especially double gated one, against Lg scaling has been verified with TCAD simulation study.
△ Less
Submitted 30 March, 2023;
originally announced April 2023.
-
Machine learning-enabled tomographic imaging of chemical short-range atomic ordering
Authors:
Yue Li,
Timoteo Colnaghi,
Yilun Gong,
Huaide Zhang,
Yuan Yu,
Ye Wei,
Bin Gan,
Min Song,
Andreas Marek,
Markus Rampp,
Siyuan Zhang,
Zongrui Pei,
Matthias Wuttig,
Jörg Neugebauer,
Zhangwei Wang,
Baptiste Gault
Abstract:
In solids, chemical short-range order (CSRO) refers to the self-organisation of atoms of certain species occupying specific crystal sites. CSRO is increasingly being envisaged as a lever to tailor the mechanical and functional properties of materials. Yet quantitative relationships between properties and the morphology, number density, and atomic configurations of CSRO domains remain elusive. Here…
▽ More
In solids, chemical short-range order (CSRO) refers to the self-organisation of atoms of certain species occupying specific crystal sites. CSRO is increasingly being envisaged as a lever to tailor the mechanical and functional properties of materials. Yet quantitative relationships between properties and the morphology, number density, and atomic configurations of CSRO domains remain elusive. Herein, we showcase how machine learning-enhanced atom probe tomography (APT) can mine the near-atomically resolved APT data and jointly exploit the technique's high elemental sensitivity to provide a 3D quantitative analysis of CSRO in a CoCrNi medium-entropy alloy. We reveal multiple CSRO configurations, with their formation supported by state-of-the-art Monte-Carlo simulations. Quantitative analysis of these CSROs allows us to establish relationships between processing parameters and physical properties. The unambiguous characterization of CSRO will help refine strategies for designing advanced materials by manipulating atomic-scale architectures.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Atomtronic superconducting quantum interference device in synthetic dimensions
Authors:
Wenxi Lai,
Yu-Quan Ma,
Yi-Wen Wei
Abstract:
We propose atomtronic counterpart of superconducting quantum interference device (SQUID) in synthetic $2$-dimensional space. The system is composed of Bose-Einstein condensate (BEC) in two neighboring optical wells which is coupled to an external coherent light. Furthermore, availability of controllable atomtronic flux qubit in the synthetic dimensions is demonstrated with this system. Control par…
▽ More
We propose atomtronic counterpart of superconducting quantum interference device (SQUID) in synthetic $2$-dimensional space. The system is composed of Bose-Einstein condensate (BEC) in two neighboring optical wells which is coupled to an external coherent light. Furthermore, availability of controllable atomtronic flux qubit in the synthetic dimensions is demonstrated with this system. Control parameter for the qubit is naturally provided by artificial magnetic flux originated from the coherent atom-light coupling. Comparing with traditional SQUID which requires at least $2$-dimensional circuits, the synthetic dimensional SQUID can be realized only in $1$-dimensional circuits. It should be a great advantage for the scalability and integration feature of quantum logic gates.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Realization of valley-spin polarized current via parametric pump in monolayer $\rm MoS_2$
Authors:
Kai-Tong Wang,
Hui Wang,
Fuming Xu,
Yunjin Yu,
Yadong Wei
Abstract:
Monolayer $MoS_2$ is a typical valleytronic material with valley-spin locked valence bands. We numerically investigate the valley-spin polarized current in monolayer $\rm MoS_2$ via adiabatic electron pumping. By introducing an exchange field to break the energy degeneracy of monolayer $MoS_2$, the top of its valence bands is valley-spin polarized and tunable by the exchange field. A device with s…
▽ More
Monolayer $MoS_2$ is a typical valleytronic material with valley-spin locked valence bands. We numerically investigate the valley-spin polarized current in monolayer $\rm MoS_2$ via adiabatic electron pumping. By introducing an exchange field to break the energy degeneracy of monolayer $MoS_2$, the top of its valence bands is valley-spin polarized and tunable by the exchange field. A device with spin-up polarized left lead, spin-down polarized right lead, and untuned central region is constructed through applying different exchange fields in the corresponding regions. Then, equal amount of pumped currents with opposite valley-spin polarization are simultaneously generated in the left and right leads when periodically varying two pumping potentials. Numerical results show that the phase difference between the pumping potentials can change the direction and hence polarization of the pumped currents. It is found that the pumped current exhibits resonant behavior in the valley-spin locked energy window, which depends strongly on the system size and is enhanced to resonant current peaks at certain system lengths. More importantly, the pumped current periodically oscillates as a function of the system length, which is closely related to the oscillation of transmission. The effects of other system parameters, such as the pumping amplitude and the static potential, are also thoroughly discussed.
△ Less
Submitted 27 January, 2023;
originally announced January 2023.
-
Investigating the Electromechanical Behavior of Unconventionally Ferroelectric $Hf_{0.5}Zr_{0.5}O_{2}$-based Capacitors Through Operando Nanobeam X-ray Diffraction
Authors:
Evgenios Stylianidis,
Pranav Surabhi,
Ruben Hamming-Green,
Mart Salverda,
Yingfen Wei,
Arjan Burema,
Sylvia Matzen,
Tamalika Banerjee,
Alexander Björling,
Binayak Mukherjee,
Sangita Dutta,
Hugo Aramberri,
Jorge Íñiguez,
Beatriz Noheda,
Dina Carbone,
Pavan Nukala
Abstract:
Understanding various aspects of ferroelectricity in hafnia-based nanomaterials is of vital importance for the development of future non-volatile memory and logic devices. Here, the unconventional and weak electromechanical response of epitaxial $La_{0.67}Sr_{0.33}MnO_{3}$/$Hf_{0.5}Zr_{0.5}O_{2}$/$La_{0.67}Sr_{0.33}MnO_{3}$ ferroelectric capacitors is investigated, via the sensitivity offered by n…
▽ More
Understanding various aspects of ferroelectricity in hafnia-based nanomaterials is of vital importance for the development of future non-volatile memory and logic devices. Here, the unconventional and weak electromechanical response of epitaxial $La_{0.67}Sr_{0.33}MnO_{3}$/$Hf_{0.5}Zr_{0.5}O_{2}$/$La_{0.67}Sr_{0.33}MnO_{3}$ ferroelectric capacitors is investigated, via the sensitivity offered by nanobeam X-ray diffraction experiments during application of electrical bias. It is shown that the pristine rhombohedral phase exhibits a negative linear piezoelectric effect with piezoelectric coefficient ($d_{33}$) ~ -0.5 to -0.8 pm$V^{-1}$. First-principles calculations support an intrinsic negative piezoresponse. In addition, it is found that the piezoelectric response is suppressed above the coercive voltage. For higher voltages, and with the onset of DC conductivity throughout the capacitor, a second-order effect is observed. The electromechanical response observed in this work is clearly different from that of normal ferroelectrics, again underlining the unconventional nature of polarization switching in the samples.
△ Less
Submitted 3 December, 2022;
originally announced December 2022.
-
Quantum Scars in Quantum Field Theory
Authors:
Jordan Cotler,
Annie Y. Wei
Abstract:
We develop the theory of quantum scars for quantum fields. By generalizing the formalisms of Heller and Bogomolny from few-body quantum mechanics to quantum fields, we find that unstable periodic classical solutions of the field equations imprint themselves in a precise manner on bands of energy eigenfunctions. This indicates a breakdown of thermalization at certain energy scales, in a manner that…
▽ More
We develop the theory of quantum scars for quantum fields. By generalizing the formalisms of Heller and Bogomolny from few-body quantum mechanics to quantum fields, we find that unstable periodic classical solutions of the field equations imprint themselves in a precise manner on bands of energy eigenfunctions. This indicates a breakdown of thermalization at certain energy scales, in a manner that can be characterized via semiclassics. As an explicit example, we consider time-periodic non-topological solitons in complex scalar field theories. We find that an unstable variant of Q-balls, called Q-clouds, induce quantum scars. Some technical contributions of our work include methods for characterizing moduli spaces of periodic orbits in field theories, which are essential for formulating our quantum scar formula. We further discuss potential connections with quantum many-body scars in Rydberg atom arrays.
△ Less
Submitted 3 December, 2022;
originally announced December 2022.
-
Nonreciprocal Charge and Spin Transport Induced by Non-Hermitian Skin Effect in Mesoscopic Heterojunctions
Authors:
H. Geng,
J. Y. Wei,
M. H. Zou,
L. Sheng,
Wei Chen,
D. Y. Xing
Abstract:
The pursuit of the non-Hermitian skin effect (NHSE) in various physical systems is of great research interest. Compared with recent progress in non-electronic systems, the implementation of the NHSE in condensed matter physics remains elusive. Here, we show that the NHSE can be engineered in the mesoscopic heterojunctions (system plus reservoir) in which electrons in two channels of the system mov…
▽ More
The pursuit of the non-Hermitian skin effect (NHSE) in various physical systems is of great research interest. Compared with recent progress in non-electronic systems, the implementation of the NHSE in condensed matter physics remains elusive. Here, we show that the NHSE can be engineered in the mesoscopic heterojunctions (system plus reservoir) in which electrons in two channels of the system moving towards each other have asymmetric coupling to those of the reservoir. This makes electrons in the system moving forward and in the opposite direction have unequal lifetimes, and so gives rise to a point-gap spectral topology. Accordingly, the electron eigenstates exhibit NHSE under the open boundary condition, consistent with the description of the generalized Brillouin zone. Such a reservoir-engineered NHSE visibly manifests itself as the nonreciprocal charge current that can be probed by the standard transport measurements. Further, we generalize the scenario to the spin-resolved NHSE, which can be probed by the nonreciprocal spin transport. Our work opens a new research avenue for implementing and detecting the NHSE in electronic mesoscopic systems, which will lead to interesting device applications.
△ Less
Submitted 19 January, 2023; v1 submitted 21 September, 2022;
originally announced September 2022.
-
Magnetic detection under high pressures using designed silicon vacancy centers in silicon carbide
Authors:
Jun-Feng Wang,
Lin Liu,
Xiao-Di Liu,
Qiang Li,
Jin-Ming Cui,
Di-Fan Zhou,
Ji-Yang Zhou,
Yu Wei,
Hai-An Xu,
Wan Xu,
Wu-Xi Lin,
Jin-Wei Yan,
Zhen-Xuan He,
Zheng-Hao Liu,
Zhi-He Hao,
Hai-Ou Li,
Wen Liu,
Jin-Shi Xu,
Eugene Gregoryanz,
Chuan-Feng Li,
Guang-Can Guo
Abstract:
Pressure-induced magnetic phase transition is attracting interest due to its ability to detect superconducting behaviour at high pressures in diamond anvil cells. However, detection of the local sample magnetic properties is a great challenge due to the small sample chamber volume. Recently, optically detected magnetic resonance (ODMR) of nitrogen vacancy (NV) centers in diamond have been used for…
▽ More
Pressure-induced magnetic phase transition is attracting interest due to its ability to detect superconducting behaviour at high pressures in diamond anvil cells. However, detection of the local sample magnetic properties is a great challenge due to the small sample chamber volume. Recently, optically detected magnetic resonance (ODMR) of nitrogen vacancy (NV) centers in diamond have been used for in-situ pressure-induced phase transition detection. However, owing to their four orientation axes and temperature-dependent zero-field-splitting, interpreting the observed ODMR spectra of NV centers remain challenging. Here, we study the optical and spin properties of implanted silicon vacancy defects in 4H-SiC, which is single-axis and temperature-independent zero-field-splitting. Using this technique, we observe the magnetic phase transition of Nd2Fe14B at about 7 GPa and map the critical temperature-pressure phase diagram of the superconductor YBa2Cu3O6.6. These results highlight the potential of silicon vacancy-based quantum sensors for in-situ magnetic detection at high pressures.
△ Less
Submitted 13 February, 2023; v1 submitted 28 August, 2022;
originally announced August 2022.
-
Direct observation of quantum anomalous vortex in Fe(Se,Te)
Authors:
Y. S. Lin,
S. Y. Wang,
X. Zhang,
Y. Feng,
Y. P. Pan,
H. Ru,
J. J. Zhu,
B. K. Xiang,
K. Liu,
C. L. Zheng,
L. Y. Wei,
M. X. Wang,
Z. K. Liu,
L. Chen,
K. Jiang,
Y. F. Guo,
Ziqiang Wang,
Y. H. Wang
Abstract:
Vortices are topological defects of type-II superconductors in an external magnetic field. In a similar fashion to a quantum anomalous Hall insulator, quantum anomalous vortex (QAV) spontaneously nucleates due to orbital-and-spin exchange interaction between vortex core states and magnetic impurity moment, breaking time-reversal symmetry (TRS) of the vortex without an external field. Here, we used…
▽ More
Vortices are topological defects of type-II superconductors in an external magnetic field. In a similar fashion to a quantum anomalous Hall insulator, quantum anomalous vortex (QAV) spontaneously nucleates due to orbital-and-spin exchange interaction between vortex core states and magnetic impurity moment, breaking time-reversal symmetry (TRS) of the vortex without an external field. Here, we used scanning superconducting quantum interference device microscopy (sSQUID) to search for its signatures in iron-chalcogenide superconductor Fe(Se,Te). Under zero magnetic field, we found a stochastic distribution of isolated anomalous vortices and antivortices with flux quanta $Φ_0$. By applying a small local magnetic field under the coil of the nano-SQUID device, we observed hysteretic flipping of the vortices reminiscent of the switching of ferromagnetic domains, suggesting locally broken-TRS. We further showed vectorial rotation of a flux line linking a paired vortex-antivortex with the local field. These unique properties of the anomalous vortices satisfied the defining criteria of QAV. Our observation suggests a quantum vortex phase with spontaneous broken-TRS in a high-temperature superconductor.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Interface Engineering Enabled Low Temperature Growth of Magnetic Insulator on Topological Insulator
Authors:
Nirjhar Bhattacharjee,
Krishnamurthy Mahalingam,
Alexandria Will-Cole,
Yuyi Wei,
Adrian Fedorko,
Cynthia T. Bowers,
Michael Page,
Michael McConney,
Don Heiman,
Nian Xiang Sun
Abstract:
Combining topological insulators (TIs) and magnetic materials in heterostructures is crucial for advancing spin-based electronics. Magnetic insulators (MIs) can be deposited on TIs using the spin-spray process, which is a unique non-vacuum, low-temperature growth process. TIs have highly reactive surfaces that oxidize upon exposure to atmosphere, making it challenging to grow spin-spray ferrites o…
▽ More
Combining topological insulators (TIs) and magnetic materials in heterostructures is crucial for advancing spin-based electronics. Magnetic insulators (MIs) can be deposited on TIs using the spin-spray process, which is a unique non-vacuum, low-temperature growth process. TIs have highly reactive surfaces that oxidize upon exposure to atmosphere, making it challenging to grow spin-spray ferrites on TIs. In this work, it is demonstrated that a thin titanium capping layer on TI, followed by oxidation in atmosphere to produce a thin TiOx interfacial layer, protects the TI surface, without significantly compromising spin transport from the magnetic material across the TiOx to the TI surface states. First, it was demonstrated that in Bi2Te3/TiOx/Ni80Fe20 heterostructures that TiOx provided an excellent barrier against diffusion of magnetic species, yet maintained a large spin-pumping effect. Second, the TiOx was also used as a protective capping layer on Bi2Te3, followed by the spin-spray growth of the MI, NixZnyFe2O4 (NZFO). For the thinnest TiOx barriers, Bi2Te3/TiOx/NZFO samples had AFM disordered interfacial layer because of diffusion. With increasing TiOx barrier thickness, the diffusion was reduced, but still maintained strong interfacial spin-pumping interaction. These experimental results demonstrate a novel method of low-temperature growth of magnetic insulators on TIs enabled by interface engineering.
△ Less
Submitted 31 July, 2022;
originally announced August 2022.
-
A mechanically strong and ductile soft magnet with extremely low coercivity
Authors:
Liuliu Han,
Fernando Maccari,
Isnaldi R. Souza Filho,
Nicolas J. Peter,
Ye Wei,
Baptiste Gault,
Oliver Gutfleisch,
Zhiming Li,
Dierk Raabe
Abstract:
Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is cruc…
▽ More
Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is crucial3. Yet, meeting this target alone is not enough: SMMs in electrical engines must withstand severe mechanical loads, i.e., the alloys need high strength and ductility4. This is a fundamental design challenge, as most methods that enhance strength introduce stress fields that can pin magnetic domains, thus increasing coercivity and hysteretic losses5. Here, we introduce an approach to overcome this dilemma. We have designed a Fe-Co-Ni-Ta-Al multicomponent alloy with ferromagnetic matrix and paramagnetic coherent nanoparticles (~91 nm size, ~55% volume fraction). They impede dislocation motion, enhancing strength and ductility. Their small size, low coherency and small magnetostatic energy create an interaction volume below the magnetic domain wall width, leading to minimal domain wall pinning, thus maintaining the soft magnetic properties. The alloy has a tensile strength of 1336 MPa at 54% tensile elongation, extremely low coercivity of 78 A/m (<1 Oe), moderate saturation magnetization of 100 Am2/kg, and high electrical resistivity of 103 μΩ u Ohm cm.
△ Less
Submitted 2 June, 2022;
originally announced July 2022.
-
Atomistic simulations of nanoindentation in single crystalline tungsten: The role of interatomic potentials
Authors:
F. J. Dominguez-Gutierrez,
P. Grigorev,
A. Naghdi,
Q. Q. Xu,
J. Byggmastar,
G. Y. Wei,
T. D. Swinburne,
S. Papanikolaou,
M. J. Alava
Abstract:
Computational modeling is usually applied to aid experimental exploration of advanced materials to better understand the fundamental plasticity mechanisms during mechanical testing. In this work, we perform Molecular dynamics (MD) simulations to emulate experimental room temperature spherical-nanoindentation of crystalline W matrices by different interatomic potentials: EAM, modified EAM, and a re…
▽ More
Computational modeling is usually applied to aid experimental exploration of advanced materials to better understand the fundamental plasticity mechanisms during mechanical testing. In this work, we perform Molecular dynamics (MD) simulations to emulate experimental room temperature spherical-nanoindentation of crystalline W matrices by different interatomic potentials: EAM, modified EAM, and a recently developed machine learned based tabulated Gaussian approximation potential (tabGAP) for describing the interaction of W-W. Results show similarities between load displacements and stress-strain curves, regardless of the numerical model. However, a discrepancy is observed at early stages of the elastic to plastic deformation transition showing different mechanisms for dislocation nucleation and evolution, that is attributed to the difference of Burgers vector magnitudes, stacking fault and dislocation glide energies. Besides, contact pressure is investigated by considering large indenters sizes that provides a detailed analysis of screw and edge dislocations during loading process. Furthermore, the glide barrier of this kind of dislocations are reported for all the interatomic potentials showing that tabGAP model presents the most accurate results with respect to density functional theory calculations and a good qualitative agreement with reported experimental data
△ Less
Submitted 11 December, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Discovery of an electronic crystal in a cuprate Mott insulator
Authors:
Mingu Kang,
Charles Zhang,
Enrico Schierle,
Stephen McCoy,
Jiarui Li,
Ronny Sutarto,
Feizhou He,
Andreas Suter,
Thomas Prokscha,
Zaher Salman,
Eugen Weschke,
Shane Cybart,
John Y. T. Wei,
Riccardo Comin
Abstract:
Copper oxide high temperature superconductors universally exhibit multiple forms of electronically ordered phases that break the native translational symmetry of the CuO2 planes. The interplay between these orders and the superconducting ground state, as well as how they arise through doping a Mott insulator, is essential to decode the mechanisms of high-temperature superconductivity. Over the yea…
▽ More
Copper oxide high temperature superconductors universally exhibit multiple forms of electronically ordered phases that break the native translational symmetry of the CuO2 planes. The interplay between these orders and the superconducting ground state, as well as how they arise through doping a Mott insulator, is essential to decode the mechanisms of high-temperature superconductivity. Over the years, various forms of electronic liquid crystal phases including charge/spin stripes and incommensurate charge-density-waves (CDWs) were found to emerge out of a correlated metallic ground state in underdoped cuprates. Early theoretical studies also predicted the emergence of a Coulomb-frustrated 'charge crystal' phase in the very lightly-doped, insulating limit of the CuO2 planes. Here, we use resonant X-ray scattering, electron transport, and muon spin rotation measurements to fully resolve the electronic and magnetic ground state and search for signatures of charge order in very lightly hole-doped cuprates from the RBa2Cu3O7-d family (RBCO; R: Y or rare earth). X-ray scattering data from RBCO films reveal a breaking of translational symmetry more pervasive than was previously known, extending down to the Mott limit. The ordering vector of this charge crystal state is linearly connected to the charge-density-waves of underdoped RBCO, suggesting that the former phase is a precursor to the latter as hole doping is increased. Most importantly, the coexistence of charge and spin order in RBCO suggests that this electronic symmetry-breaking state is common to the CuO2 planes in the very lightly-doped regime. These findings bridge the gap between the Mott insulating state and the underdoped metallic state and underscore the prominent role of Coulomb-frustrated electronic phase separation among all cuprates.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Machine learning-enabled high-entropy alloy discovery
Authors:
Ziyuan Rao,
PoYen Tung,
Ruiwen Xie,
Ye Wei,
Hongbin Zhang,
Alberto Ferrari,
T. P. C. Klaver,
Fritz Körmann,
Prithiv Thoudden Sukumar,
Alisson Kwiatkowski da Silva,
Yao Chen,
Zhiming Li,
Dirk Ponge,
Jörg Neugebauer,
Oliver Gutfleisch,
Stefan Bauer,
Dierk Raabe
Abstract:
High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of…
▽ More
High-entropy alloys are solid solutions of multiple principal elements, capable of reaching composition and feature regimes inaccessible for dilute materials. Discovering those with valuable properties, however, relies on serendipity, as thermodynamic alloy design rules alone often fail in high-dimensional composition spaces. Here, we propose an active-learning strategy to accelerate the design of novel high-entropy Invar alloys in a practically infinite compositional space, based on very sparse data. Our approach works as a closed-loop, integrating machine learning with density-functional theory, thermodynamic calculations, and experiments. After processing and characterizing 17 new alloys (out of millions of possible compositions), we identified 2 high-entropy Invar alloys with extremely low thermal expansion coefficients around 2*10-6 K-1 at 300 K. Our study thus opens a new pathway for the fast and automated discovery of high-entropy alloys with optimal thermal, magnetic and electrical properties.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Exploring the Effect of the Number of Hydrogen Atoms on the Properties of Lanthanide Hydrides by DMFT
Authors:
Yao Wei,
Elena Chachkarova,
Evgeny Plekhanov,
Nicola Bonini,
Cedric Weber
Abstract:
Lanthanide hydrogen-rich materials have long been considered as one of the candidates with high-temperature superconducting properties in condensed matter physics, and have attracted great interest. Attempts to investigate the effects of different compositions of lanthanide hydrogen-rich materials are ongoing, with predictions and experimental studies in recent years having shown that substances s…
▽ More
Lanthanide hydrogen-rich materials have long been considered as one of the candidates with high-temperature superconducting properties in condensed matter physics, and have attracted great interest. Attempts to investigate the effects of different compositions of lanthanide hydrogen-rich materials are ongoing, with predictions and experimental studies in recent years having shown that substances such as LaH 10 , CeH 9 , and LaH 16 exhibit extremely high superconducting temperatures between 150-250 GPa. In particular, researchers have noted that in those materials an increase in the f character at the Fermi level leads to an increase in the superconducting temperature. Here, we further elaborate on the effect of the ratios of lanthanide to hydrogen in these substances with the aim to bring more clarity to the study of superhydrides in these extreme cases by comparing a variety of lanthanide hydrogen-rich materials with different ratios using the DMFT method, and provide ideas for later structural predictions and material property studies.
△ Less
Submitted 30 March, 2022; v1 submitted 23 February, 2022;
originally announced February 2022.
-
Exploring Native Atomic Defects in NiTe2
Authors:
Wen-Xiao Wang,
Kaihui Li,
Xiaoshan Dong,
Hao Xie,
Jinglan Qiu,
Chunqiang Xu,
Kai Liu,
Juntao Song,
Yi-Wen Wei,
Ke-Ke Bai,
Xiaofeng Xu,
Ying Liu
Abstract:
Nickel ditelluride (NiTe2), a new discovered type-II Dirac semimetal whose Dirac node lies close to its Fermi level, is expected to exhibit exotic phenomena including Lifshitz transition and superconductivity. As we know, defects are inevitable for transition metal dichalcogenides and have significant impacts on the optical and electronic properties. However, the systematic study of defects in NiT…
▽ More
Nickel ditelluride (NiTe2), a new discovered type-II Dirac semimetal whose Dirac node lies close to its Fermi level, is expected to exhibit exotic phenomena including Lifshitz transition and superconductivity. As we know, defects are inevitable for transition metal dichalcogenides and have significant impacts on the optical and electronic properties. However, the systematic study of defects in NiTe2 is still lack. Here, by using high-resolution scanning tunneling microscopy combined with first-principles calculations, the point defects including the vacancy, intercalation and antisite defects in NiTe2 are systematically investigated. We identified five main types native defects and revealed that the growth condition could affect the type of native defects. By controlling the ratio of ingredient during synthesis, the types of point defects are expected to be manipulated, especially antisite defects. Additionally, we find native defects could slightly dope the topological surface states. Our results provide a facile way to manipulate defects for future optimizing the electronic properties of NiTe2 and other related materials.
△ Less
Submitted 2 January, 2022;
originally announced January 2022.
-
Giant dynamical electron-magnon coupling in metal-metal-ferromagnetic insulator heterostructure
Authors:
Gaoyang Li,
Hao Jin,
Yadong Wei,
Jian Wang
Abstract:
Magnon-mediated spin transport across nonmagnetic metal (NM) and ferromagnetic insulator (FI) interface depends critically on electron-magnon coupling. We propose a novel route to enhance electron-magnon coupling dynamically from transport viewpoint. Using non-equilibrium Green's function a theoretical formalism for magnon-mediated spin current is developed. In the language of transport, the effec…
▽ More
Magnon-mediated spin transport across nonmagnetic metal (NM) and ferromagnetic insulator (FI) interface depends critically on electron-magnon coupling. We propose a novel route to enhance electron-magnon coupling dynamically from transport viewpoint. Using non-equilibrium Green's function a theoretical formalism for magnon-mediated spin current is developed. In the language of transport, the effective electron-magnon coupling at NM/FI interface is determined by self-energy of FI lead, which is proportional to density of states (DOS) at NM/FI interface due to nonlinear process of electron-magnon conversion. By modifying interfacial DOS, the spin conductance of 2D and 3D NM/FI systems can be increased by almost three orders of magnitude, setting up a new platform of manipulating dynamical electron-magnon coupling.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Degradation Mechanism of Perovskite under High Charge Carrier Density Condition
Authors:
Guohui Li,
Huihui Pi,
Yanfu Wei,
Bolin Zhou,
Ya Gao,
Rong Wen,
Yuying Hao,
Han Zhang,
Beng S. Ong,
Yanxia Cui
Abstract:
Extensive studies have focused on degradation of perovskite at low charge carrier density (<10^16 cm^-3), but few have surveyed the degradation mechanism at high charge carrier density (~10^18 cm^-3). Here, we investigate the degradation mechanisms of perovskite under high charge carrier conditions. Unlike the observations in previous works, we find that MAPbI3 degradation starts at surface defect…
▽ More
Extensive studies have focused on degradation of perovskite at low charge carrier density (<10^16 cm^-3), but few have surveyed the degradation mechanism at high charge carrier density (~10^18 cm^-3). Here, we investigate the degradation mechanisms of perovskite under high charge carrier conditions. Unlike the observations in previous works, we find that MAPbI3 degradation starts at surface defects and progressing from the surface defects towards neighboring regions under high charge carrier density condition. By using PbI2 passivation, the defect-initiated degradation is significantly suppressed and the nanoplatelet degrades in a layer-by-layer way, enabling the MAPbI3 laser sustain for 4500 s (2.7*10^7 pulses), which is almost 3 times longer than that of the nanoplatelet laser without passivation. Meanwhile, the PbI2 passivated MAPbI3 nanoplatelet laser with the nanoplatelet cavity displaying a maximum quality factor up to ~7800, the highest reported for all MAPbI3 nanoplatelet cavities. Furthermore, a high stability MAPbI3 nanoplatelet laser that can last for 8500 s (5.1*10^7 pulses) is demonstrated based on a dual passivation strategy, by retarding the defect-initiated degradation and surface-initiated degradation, simultaneously. This work provides in-depth insights for understanding the degradation of perovskite at high charge carrier density.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
High temperature superconductivity in the lanthanide hydrides at extreme pressures
Authors:
Yao Wei,
Francesco Macheda,
Zelong Zhao,
Terence Tse,
Evgeny Plekhanov,
Nicola Bonini,
Cedric Weber
Abstract:
Hydrogen-rich superhydrides are promising high-Tc superconductors, with superconductivity experimentally observed near room temperature, as shown in recently discovered lanthanide superhydrides at very high pressures, e.g. LaH10 at 170 GPa and CeH9 at 150 GPa. Superconductivity is believed to be closely related with the high vibrational modes of the bound hydrogen ions. Here we study the limit of…
▽ More
Hydrogen-rich superhydrides are promising high-Tc superconductors, with superconductivity experimentally observed near room temperature, as shown in recently discovered lanthanide superhydrides at very high pressures, e.g. LaH10 at 170 GPa and CeH9 at 150 GPa. Superconductivity is believed to be closely related with the high vibrational modes of the bound hydrogen ions. Here we study the limit of extreme pressures (above 200 GPa) where lanthanide hydrides with large hydrogen content have been reported. We focus on LaH16 and CeH16, two prototype candidates for achieving a large electronic contribution from hydrogen in the electron-phonon coupling. In this work, we propose a first principles calculation platform with the inclusion of many-body corrections to evaluate the detailed physical properties of the Ce-H and La-H systems and to understand the structure, stability and superconductivity of these systems at ultra-high pressure. We provide a practical approach to further investigate conventional superconductivity in hydrogen rich superhydrides. We report that density functional theory provides accurate structure and phonon frequencies, but many-body corrections lead to an increase of the critical temperature, that is associated with spectral weight transfer of the f-states.
△ Less
Submitted 13 January, 2022; v1 submitted 13 December, 2021;
originally announced December 2021.
-
Transport features of topological corner states in honeycomb lattice with multihollow structure
Authors:
Kai-Tong Wang,
Fuming Xu,
Bin Wang,
Yunjin Yu,
Yadong Wei
Abstract:
Higher-order topological phase in 2-dimensional (2D) systems is characterized by in-gap corner states, which are hard to detect and utilize. We numerically investigate transport properties of topological corner states in 2D honeycomb lattice, where the second-order topological phase is induced by an in-plane Zeeman field in the conventional Kane-Mele model. Through engineering multihollow structur…
▽ More
Higher-order topological phase in 2-dimensional (2D) systems is characterized by in-gap corner states, which are hard to detect and utilize. We numerically investigate transport properties of topological corner states in 2D honeycomb lattice, where the second-order topological phase is induced by an in-plane Zeeman field in the conventional Kane-Mele model. Through engineering multihollow structures with appropriate boundaries in honeycomb lattice, multiple corner states emerge, which greatly increases the probability to observe them. A typical two-probe setup is built to study the transport features of a diamond-shaped system with multihollow structures. Numerical results reveal the existence of global resonant states in bulk insulator, which corresponds to the resonant tunneling of multiple corner states and occupies the entire scattering region. Furthermore, based on the well separated energy levels of multiple corner states, a single-electron source is constructed.
△ Less
Submitted 20 December, 2021; v1 submitted 25 November, 2021;
originally announced November 2021.
-
Chlorine doping of MoSe2 flakes by ion implantation
Authors:
Slawomir Prucnal,
Arsalan Hashemi,
Mahdi Ghorbani-Asl,
René Hübner,
Juanmei Duan,
Yidan Wei,
Divanshu Sharma,
Dietrich R. T. Zahn,
René Ziegenrücker,
Ulrich Kentsch,
Arkady V. Krasheninnikov,
Manfred Helm,
Shengqiang Zhou
Abstract:
The efficient integration of transition metal dichalcogenides (TMDs) into the current electronic device technology requires mastering the techniques of effective tuning of their optoelectronic properties. Specifically, controllable doping is essential. For conventional bulk semiconductors, ion implantation is the most developed method offering stable and tunable doping. In this work, we demonstrat…
▽ More
The efficient integration of transition metal dichalcogenides (TMDs) into the current electronic device technology requires mastering the techniques of effective tuning of their optoelectronic properties. Specifically, controllable doping is essential. For conventional bulk semiconductors, ion implantation is the most developed method offering stable and tunable doping. In this work, we demonstrate n-type doping in MoSe2 flakes realized by low-energy ion implantation of Cl+ ions followed by millisecond-range flash lamp annealing (FLA). We further show that FLA for 3 ms with a peak temperature of about 1000 °C is enough to recrystallize implanted MoSe2. The Cl distribution in few-layer-thick MoSe2 is measured by secondary ion mass spectrometry. An increase in the electron concentration with increasing Cl fluence is determined from the softening and red shift of the Raman-active A_1g phonon mode due to the Fano effect. The electrical measurements confirm the n-type doping of Cl-implanted MoSe2. A comparison of the results of our density functional theory calculations and experimental temperature-dependent micro-Raman spectroscopy data indicates that Cl atoms are incorporated into the atomic network of MoSe2 as substitutional donor impurities.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Realization of Qi-Wu-Zhang model in spin-orbit-coupled ultracold fermions
Authors:
Ming-Cheng Liang,
Yu-Dong Wei,
Long Zhang,
Xu-Jie Wang,
Han Zhang,
Wen-Wei Wang,
Wei Qi,
Xiong-Jun Liu,
Xibo Zhang
Abstract:
Based on the optical Raman lattice technique, we experimentally realize the Qi-Wu-Zhang model for quantum anomalous Hall phase in ultracold fermions with two-dimensional (2D) spin-orbit (SO) coupling. We develop a novel protocol of pump-probe quench measurement to probe, with minimal heating, the resonant spin flipping on particular quasi-momentum subspace called band-inversion surfaces. With this…
▽ More
Based on the optical Raman lattice technique, we experimentally realize the Qi-Wu-Zhang model for quantum anomalous Hall phase in ultracold fermions with two-dimensional (2D) spin-orbit (SO) coupling. We develop a novel protocol of pump-probe quench measurement to probe, with minimal heating, the resonant spin flipping on particular quasi-momentum subspace called band-inversion surfaces. With this protocol we demonstrate the first Dirac-type 2D SO coupling in a fermionic system, and detect non-trivial band topology by observing the change of band-inversion surfaces as the two-photon detuning varies. The non-trivial band topology is also observed by slowly loading the atoms into optical Raman lattices and measuring the spin textures. Our results show solid evidence for the realization of the minimal SO-coupled quantum anomalous Hall model, which can provide a feasible platform to investigate novel topological physics including the correlation effects with SO-coupled ultracold fermions.
△ Less
Submitted 20 July, 2022; v1 submitted 18 September, 2021;
originally announced September 2021.
-
Computational Materials Discovery for Lanthanide Hydrides at high pressure: predicting High Temperature superconductivity
Authors:
Evgeny Plekhanov,
Zelong Zhao,
Francesco Macheda,
Yao Wei,
Nicola Bonini,
Cedric Weber
Abstract:
Hydrogen-rich superhydrides are believed to be very promising high-T$_c$ superconductors, with experimentally observed critical temperatures near room temperature, as shown in recently discovered lanthanide superhydrides at very high pressures, e.g. LaH$_{10}$ at 170 GPa and CeH$_9$ at 150 GPa. With the motivation of discovering new hydrogen-rich high-T$_c$ superconductors at lowest possible press…
▽ More
Hydrogen-rich superhydrides are believed to be very promising high-T$_c$ superconductors, with experimentally observed critical temperatures near room temperature, as shown in recently discovered lanthanide superhydrides at very high pressures, e.g. LaH$_{10}$ at 170 GPa and CeH$_9$ at 150 GPa. With the motivation of discovering new hydrogen-rich high-T$_c$ superconductors at lowest possible pressure, quantitative theoretical predictions are needed. In these promising compounds, superconductivity is mediated by the highly energetic lattice vibrations associated with hydrogen and their interplay with the electronic structure, requiring fine descriptions of the electronic properties, notoriously challenging for correlated $f$ systems. In this work, we propose a first-principles calculation platform with the inclusion of many-body corrections to evaluate the detailed physical properties of the Ce-H system and to understand the structure, stability and superconductivity of CeH$_9$ at high pressure. We report how the prediction of T$_c$ is affected by the hierarchy of many-body corrections, and obtain a compelling increase of T$_c$ at the highest level of theory, which goes in the direction of experimental observations. Our findings shed a significant light on the search for superhydrides in close similarity with atomic hydrogen within a feasible pressure range. We provide a practical platform to further investigate and understand conventional superconductivity in hydrogen rich superhydrides.
△ Less
Submitted 7 September, 2021; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Revealing in-plane grain boundary composition features through machine learning from atom probe tomography data
Authors:
Xuyang Zhou,
Ye Wei,
Markus Kühbach,
Huan Zhao,
Florian Vogel,
Reza Darvishi Kamachali,
Gregory B. Thompson,
Dierk Raabe,
Baptiste Gault
Abstract:
Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a t…
▽ More
Grain boundaries (GBs) are planar lattice defects that govern the properties of many types of polycrystalline materials. Hence, their structures have been investigated in great detail. However, much less is known about their chemical features, owing to the experimental difficulties to probe these features at the atomic length scale inside bulk material specimens. Atom probe tomography (APT) is a tool capable of accomplishing this task, with an ability to quantify chemical characteristics at near-atomic scale. Using APT data sets, we present here a machine-learning-based approach for the automated quantification of chemical features of GBs. We trained a convolutional neural network (CNN) using twenty thousand synthesized images of grain interiors, GBs, or triple junctions. Such a trained CNN automatically detects the locations of GBs from APT data. Those GBs are then subjected to compositional mapping and analysis, including revealing their in-plane chemical decoration patterns. We applied this approach to experimentally obtained APT data sets pertaining to three case studies, namely, Ni-P, Pt-Au, and Al-Zn-Mg-Cu alloys. In the first case, we extracted GB-specific segregation features as a function of misorientation and coincidence site lattice character. Secondly, we revealed interfacial excesses and in-plane chemical features that could not have been found by standard compositional analyses. Lastly, we tracked the temporal evolution of chemical decoration from early-stage solute GB segregation in the dilute limit to interfacial phase separation, characterized by the evolution of complex composition patterns. This machine-learning-based approach provides quantitative, unbiased, and automated access to GB chemical analyses, serving as an enabling tool for new discoveries related to interface thermodynamics, kinetics, and the associated chemistry-structure-property relations.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Electric field induced injection and shift currents in zigzag graphene nanoribbons
Authors:
Yadong Wei,
Weiqi Li,
Yongyuan Jiang,
Jinluo Cheng
Abstract:
We theoretically investigate the one-color injection currents and shift currents in zigzag graphene nanoribbons with applying a static electric field across the ribbon, which breaks the inversion symmetry to generate nonzero second order optical responses by dipole interaction. These two types of currents can be separately excited by specific light polarization, circularly polarized lights for inj…
▽ More
We theoretically investigate the one-color injection currents and shift currents in zigzag graphene nanoribbons with applying a static electric field across the ribbon, which breaks the inversion symmetry to generate nonzero second order optical responses by dipole interaction. These two types of currents can be separately excited by specific light polarization, circularly polarized lights for injection currents and linearly polarized lights for shift currents. Based on a tight binding model formed by carbon 2p$_z$ orbitals, we numerically calculate the spectra of injection coefficients and shift conductivities, as well as their dependence on the static field strength and ribbon width. The spectra show many peaks associated with the optical transition between different subbands, and the positions and amplitudes of these peaks can be effectively controlled by the static electric field. By constructing a simple two band model, the static electric fields are found to modify the edge states in a nonperturbative way, and their associated optical transitions dominate the current generation at low photon energies. For typical parameters, such as a static field 10$^6$ V/m and light intensity 0.1 GW/cm$^2$, the magnitude of the injection and shift currents for a ribbon with width 5 nm can be as large as the order of 1 $μ$A. Our results provide a physical basis for realizing passive optoelectronic devices based on graphene nanoribbons.
△ Less
Submitted 9 June, 2021;
originally announced June 2021.
-
Evidence of topological edge states in a superconducting nonsymmorphic nodal-line semimetal
Authors:
L. X. Xu,
Y. Y. Y. Xia,
S. Liu,
Y. W. Li,
L. Y. Wei,
H. Y. Wang,
C. W. Wang,
H. F. Yang,
A. J. Liang,
K. Huang,
T. Deng,
W. Xia,
X. Zhang,
H. J. Zheng,
Y. J. Chen,
L. X. Yang,
M. X. Wang,
Y. F. Guo,
G. Li,
Z. K. Liu,
Y. L. Chen
Abstract:
Topological materials host fascinating low dimensional gapless states at the boundary. As a prominent example, helical topological edge states (TESs) of two-dimensional topological insulators (2DTIs) and their stacked three-dimensional (3D) equivalent, weak topological insulators (WTIs), have sparked research enthusiasm due to their potential application in the next generation of electronics/spint…
▽ More
Topological materials host fascinating low dimensional gapless states at the boundary. As a prominent example, helical topological edge states (TESs) of two-dimensional topological insulators (2DTIs) and their stacked three-dimensional (3D) equivalent, weak topological insulators (WTIs), have sparked research enthusiasm due to their potential application in the next generation of electronics/spintronics with low dissipation. Here, we propose layered superconducting material CaSn as a WTI with nontrivial Z2 as well as nodal line semimetal protected by crystalline non-symmorphic symmetry. Our systematic angle-resolved photoemission spectroscopy (ARPES) investigation on the electronic structure exhibits excellent agreement with the calculation. Furthermore, scanning tunnelling microscopy/spectroscopy (STM/STS) at the surface step edge shows signatures of the expected TES. These integrated evidences from ARPES, STM/STS measurement and corresponding ab initio calculation strongly support the existence of TES in the non-symmorphic nodal line semimetal CaSn, which may become a versatile material platform to realize multiple exotic electronic states as well as topological superconductivity.
△ Less
Submitted 9 May, 2021; v1 submitted 7 May, 2021;
originally announced May 2021.
-
Microstructure evolution under the space-time variational solidification conditions in a melt pool: A multi-scale simulation study
Authors:
Fengyi Yu,
Yanhong Wei,
Qiaodan Hu,
Jianguo Li
Abstract:
The properties of welded components are dominated by the microstructure evolution in the pool, where the solidification conditions are space-time variational. To represent the variational solidification conditions in the pool, the multi-scale simulation is carried out in this paper, combining the microscopic Phase-Field (PF) equations with the macroscopic thermal processes. Firstly, two different…
▽ More
The properties of welded components are dominated by the microstructure evolution in the pool, where the solidification conditions are space-time variational. To represent the variational solidification conditions in the pool, the multi-scale simulation is carried out in this paper, combining the microscopic Phase-Field (PF) equations with the macroscopic thermal processes. Firstly, two different models, the GR model and TF model, are employed to simulate the single crystal solidification at a local region of the pool. Results suggest the TF model is more suitable to reflect the variational conditions than the GR model. Secondly, the single-crystal solidification and poly-crystal solidification at the whole region of the pool are performed through the TF model. The results demonstrate the space-time variabilities of the solidification conditions across the melt pool. Meanwhile, the variational conditions affect the microstructure evolution significantly, including the onset of initial instability at the epitaxial growth stage and the directional evolutions of the converging grain boundaries (GBs) and diverging GBs at the competitive growth stage. Moreover, the formation of axial grain structures is observed, which can be regarded as the competition between the grains along the axial direction and radial direction. This study indicates the necessity of considering the variational conditions in a pool. Meanwhile, the PF model can simulate microstructure evolution under the variational conditions accurately, which has a great potential for investigating solidification dynamics in the melt pool.
△ Less
Submitted 15 September, 2022; v1 submitted 22 March, 2021;
originally announced March 2021.