Showing 1–28 of 28 results for author: Zou, B

Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography

Authors: Baptiste Gault, Aparna Saksena, Xavier Sauvage, Paul Bagot, Leonardo S. Aota, Jonas Arlt, Lisa T. Belkacemi, Torben Boll, Yi-Sheng Chen, Luke Daly, Milos B. Djukic, James O. Douglas, Maria J. Duarte, Peter J. Felfer, Richard G. Forbes, Jing Fu, Hazel M. Gardner, Ryota Gemma, Stephan S. A. Gerstl, Yilun Gong, Guillaume Hachet, Severin Jakob, Benjamin M. Jenkins, Megan E. Jones, Heena Khanchandani , et al. (20 additional authors not shown)

Abstract: As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enab… ▽ More As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enabling H mapping, including local hydrogen concentration analyses at specific microstructural features, is essential for understanding the multiple ways that H affect the properties of materials, including for instance embrittlement mechanisms and their synergies, but also spatial mapping and quantification of hydrogen isotopes is essential to accurately predict tritium inventory of future fusion power plants, ensuring their safe and efficient operation for example. Atom probe tomography (APT) has the intrinsic capabilities for detecting hydrogen (H), and deuterium (D), and in principle the capacity for performing quantitative mapping of H within a material's microstructure. Yet the accuracy and precision of H analysis by APT remain affected by the influence of residual hydrogen from the ultra-high vacuum chamber that can obscure the signal of H from within the material, along with a complex field evaporation behavior. The present article reports the essence of discussions at a focused workshop held at the Max-Planck Institute for Sustainable Materials in April 2024. The workshop was organized to pave the way to establishing best practices in reporting APT data for the analysis of H. We first summarize the key aspects of the intricacies of H analysis by APT and propose a path for better reporting of the relevant data to support interpretation of APT-based H analysis in materials. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Topologically Variable and Volumetric Morphing of 3D Architected Materials with Shape Locking

Authors: Kai Xiao, Yuhao Wang, Chao Song, Bihui Zou, Zihe Liang, Heeseung Han, Yilin Du, Hanqing Jiang, Jaehyung Ju

Abstract: The morphing of 3D structures is suitable for i) future tunable material design for customizing material properties and ii) advanced manufacturing tools for fabricating 3D structures on a 2D plane. However, there is no inverse design method for topologically variable and volumetric morphing or morphing with shape locking, which limits practical engineering applications. In this study, we construct… ▽ More The morphing of 3D structures is suitable for i) future tunable material design for customizing material properties and ii) advanced manufacturing tools for fabricating 3D structures on a 2D plane. However, there is no inverse design method for topologically variable and volumetric morphing or morphing with shape locking, which limits practical engineering applications. In this study, we construct a general inverse design method for 3D architected materials for topologically variable and volumetric morphing, whose shapes are lockable in the morphed states, which can contribute to future tunable materials, design, and advanced manufacturing. Volumetric mapping of bistable unit cells onto any 3D morphing target geometry with kinematic and kinetic modifications can produce flat-foldable and volumetric morphing structures with shape-locking. This study presents a generalized inverse design method for 3D metamaterial morphing that can be used for structural applications with shape locking. Topologically variable morphing enables the manufacture of volumetric structures on a 2D plane, saving tremendous energy and materials compared with conventional 3D printing. Volumetric morphing can significantly expand the design space with tunable physical properties without limiting the selection of base materials. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Electrical Control of Two-Dimensional Electron-Hole Fluids in the Quantum Hall Regime

Authors: Bo Zou, Yongxin Zeng, A. H. MacDonald, Artem Strashko

Abstract: We study the influence of quantizing perpendicular magnetic fields on the ground state of a bilayer with electron and hole fluids separated by an opaque tunnel barrier. In the absence of a field, the ground state at low carrier densities is a condensate of s-wave excitons that has spontaneous interlayer phase coherence. We find that a series of phase transitions emerge at strong perpendicular fiel… ▽ More We study the influence of quantizing perpendicular magnetic fields on the ground state of a bilayer with electron and hole fluids separated by an opaque tunnel barrier. In the absence of a field, the ground state at low carrier densities is a condensate of s-wave excitons that has spontaneous interlayer phase coherence. We find that a series of phase transitions emerge at strong perpendicular fields between condensed states and incompressible incoherent states with full electron and hole Landau levels. When the electron and hole densities are unequal, condensation can occur in higher angular momentum electron-hole pair states and, at weak fields, break rotational symmetry. We explain how this physics is expressed in dual-gate phase diagrams, and predict transport and capacitively-probed thermodynamic signatures that distinguish different states. △ Less

Submitted 27 December, 2023; v1 submitted 8 September, 2023; originally announced September 2023.

Deep learning-based computational method for soft matter dynamics: Deep Onsager-Machlup method

Authors: Zhihao Li, Boyi Zou, Haiqin Wang, Jian Su, Dong Wang, Xinpeng Xu

Abstract: A deep learning-based computational method has been proposed for soft matter dynamics -- the deep Onsager-Machlup method (DOMM), which combines the brute forces of deep neural networks (DNNs) with the fundamental physics principle -- Onsager-Machlup variational principle (OMVP). In the DOMM, the trial solution to the dynamics is constructed by DNNs that allow us to explore a rich and complex set o… ▽ More A deep learning-based computational method has been proposed for soft matter dynamics -- the deep Onsager-Machlup method (DOMM), which combines the brute forces of deep neural networks (DNNs) with the fundamental physics principle -- Onsager-Machlup variational principle (OMVP). In the DOMM, the trial solution to the dynamics is constructed by DNNs that allow us to explore a rich and complex set of admissible functions. It outperforms the Ritz-type variational method where one has to impose carefully-chosen trial functions. This capability endows the DOMM with the potential to solve rather complex problems in soft matter dynamics that involve multiple physics with multiple slow variables, multiple scales, and multiple dissipative processes. Actually, the DOMM can be regarded as an extension of the deep Ritz method constructed using variational formulations of physics models to solve static problems in physics as discussed in our former work [Wang et al, Soft Matter, 2022, 18, 6015-6031]. In this work, as the first step, we focus on the validation of the DOMM as a useful computational method by using it to solve several typical soft matter dynamic problems: particle diffusion in dilute solutions, and two-phase dynamics with and without hydrodynamics. The predicted results agree very well with the analytical solution or numerical solution from traditional computational methods. These results show the accuracy and convergence of DOMM and justify it as an alternative computational method for solving soft matter dynamics. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 15 pages, 6 figures

Tuning the Interlayer Microstructure and Residual Stress of Buffer-Free Direct Bonding GaN/Si Heterostructures

Authors: Yan Zhou, Shi Zhou, Shun Wan, Bo Zou, Yuxia Feng, Rui Mei, Heng Wu, Pingheng Tan, Naoteru Shigekawa, Jianbo Liang, Martin Kuball

Abstract: The direct integration of GaN with Si can boost great potential for low-cost, large-scale, and high-power device applications. However, it is still challengeable to directly grow GaN on Si without using thick strain relief buffer layers due to their large lattice and thermal-expansion-coefficient mismatches. In this work, a GaN/Si heterointerface without any buffer layer is successfully fabricated… ▽ More The direct integration of GaN with Si can boost great potential for low-cost, large-scale, and high-power device applications. However, it is still challengeable to directly grow GaN on Si without using thick strain relief buffer layers due to their large lattice and thermal-expansion-coefficient mismatches. In this work, a GaN/Si heterointerface without any buffer layer is successfully fabricated at room temperature via surface activated bonding (SAB). The residual stress states and interfacial microstructures of GaN/Si heterostructures were systematically investigated through micro-Raman spectroscopy and transmission electron microscopy. Compared to the large compressive stress that existed in GaN layers grown-on-Si by MOCVD, a significantly relaxed and uniform small tensile stress was observed in GaN layers bonded-to-Si by SAB; this is mainly ascribed to the amorphous layer formed at the bonding interface. In addition, the interfacial microstructure and stress states of bonded GaN/Si heterointerfaces was found can be significantly tuned by appropriate thermal annealing. This work moves an important step forward directly integrating GaN to the present Si CMOS technology with high quality thin interfaces, and brings great promises for wafer-scale low-cost fabrication of GaN electronics. △ Less

Submitted 2 February, 2023; originally announced February 2023.

Comments: 15 pages, 3 figures

Synthesis and Superconductivity in yttrium superhydrides under high pressure

Authors: Yingying Wang, Kui Wang, Yao Sun, Liang Ma, Yanchao Wang, Bo Zou, Guangtao Liu, Mi Zhou, Hongbo Wang

Abstract: The flourishing rare earth superhydrides are a class of recently discovered materials that possess near-room-temperature superconductivity at high pressures, opening a new era of superconductivity research at high pressures. Among these superhydrides, yttrium superhydrides attracted great interest owing to their abundance of stoichiometries and excellent superconductivities. Here, we carried out a… ▽ More The flourishing rare earth superhydrides are a class of recently discovered materials that possess near-room-temperature superconductivity at high pressures, opening a new era of superconductivity research at high pressures. Among these superhydrides, yttrium superhydrides attracted great interest owing to their abundance of stoichiometries and excellent superconductivities. Here, we carried out a comprehensive study of yttrium superhydrides in a wide pressure range of 145-300 GPa. We successfully synthesized a series of superhydrides with the compositions of YH4, YH6, YH7, and YH9, and reported their superconducting transition temperatures of 82 K at 167 GPa, 218 K at 165 GPa, 29 K at 162 GPa, and 230 K at 300 GPa, respectively, which were evidenced by a sharp drop of resistivity. The structure and superconductivity of YH4, which was taken as a representative example, were also examined by X-ray diffraction measurements and the suppression of the superconductivity under external magnetic fields, respectively. Clathrate YH10 as a candidate of room-temperature superconductor was not synthesized within the studied pressure and temperature ranges of up to 300 GPa and 2000 K, respectively. The current work created a detailed platform for further searching room-temperature superconductors in polynary yttrium-based superhydrides. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Magneto-thermomechanically triggered active mechanical metamaterials -- untethered, reversible, reprogrammable transformations with shape locking

Authors: Bihui Zou, Zihe Liang, Zhiming Cui, Kai Xiao, Shuang Shao, Jaehyung Ju

Abstract: Future active metamaterials for reconfigurable structural applications require fast, untethered, reversible, and reprogrammable (multimodal) transformability with shape locking. Herein, we aim to construct and demonstrate a magneto-thermomechanical tool that enables a single material system to transform with untethered, reversible, low-powered reprogrammable deformations and shape locking via the… ▽ More Future active metamaterials for reconfigurable structural applications require fast, untethered, reversible, and reprogrammable (multimodal) transformability with shape locking. Herein, we aim to construct and demonstrate a magneto-thermomechanical tool that enables a single material system to transform with untethered, reversible, low-powered reprogrammable deformations and shape locking via the application of magneto-thermomechanically triggered prestress on a shape memory polymer and structural instability with asymmetric magnetic torque. We demonstrate the mutual assistance of two physics concepts - magnetic control combined with the thermomechanical behavior of shape memory polymers, without requiring new materials synthesis and high-power energy for reprogramming. Our approach can open a new path of active metamaterials, flexible yet stiff soft robots, and multimodal morphing structures, where we can design them in reversible and reprogrammable ways. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Journal ref: Adv. Mater. 35 (2023) 2207349

Emergence of Interlayer Coherence in Twist-Controlled Graphene Double Layers

Authors: Kenneth Lin, Nitin Prasad, G. William Burg, Bo Zou, Keiji Ueno, Kenji Watanabe, Takashi Taniguchi, Allan H. MacDonald, Emanuel Tutuc

Abstract: We report enhanced interlayer tunneling with reduced linewidth at zero interlayer bias in a twist-controlled double monolayer graphene heterostructure in the quantum Hall regime, when the top ($ν_{\mathrm{T}}$) and bottom ($ν_{\mathrm{B}}$) layer filling factors are near $ν_{\mathrm{T}}=\pm1/2, \pm3/2$ and $ν_{\mathrm{B}}=\pm1/2, \pm3/2$, and the total filling factor $ν= \pm1$ or $\pm3$. The zero-… ▽ More We report enhanced interlayer tunneling with reduced linewidth at zero interlayer bias in a twist-controlled double monolayer graphene heterostructure in the quantum Hall regime, when the top ($ν_{\mathrm{T}}$) and bottom ($ν_{\mathrm{B}}$) layer filling factors are near $ν_{\mathrm{T}}=\pm1/2, \pm3/2$ and $ν_{\mathrm{B}}=\pm1/2, \pm3/2$, and the total filling factor $ν= \pm1$ or $\pm3$. The zero-bias interlayer conductance peaks are stable against variations of layer filling factor, and signal the emergence of interlayer phase coherence. Our results highlight twist control as a key attribute in revealing interlayer coherence using tunneling. △ Less

Submitted 21 November, 2022; v1 submitted 23 June, 2022; originally announced June 2022.

Comments: 5 pages, 4 figures, includes supplementary material

Reliable and Broad-range Layer Identification of Au-assisted Exfoliated Large Area MoS$_2$ and WS$_2$ Using Reflection Spectroscopic Fingerprints

Authors: Bo Zou, Yu Zhou, Yan Zhou, Yanyan Wu, Yang He, Xiaonan Wang, Jinfeng Yang, Lianghui Zhang, Yuxiang Chen, Shi Zhou, Huaixin Guo, Huarui Sun

Abstract: The emerging Au-assisted exfoliation technique provides a wealth of large-area and high-quality ultrathin two-dimensional (2D) materials compared with traditional tape-based exfoliation. Fast, damage-free, and reliable determination of the layer number of such 2D films is essential to study layer-dependent physics and promote device applications. Here, an optical method has been developed for simp… ▽ More The emerging Au-assisted exfoliation technique provides a wealth of large-area and high-quality ultrathin two-dimensional (2D) materials compared with traditional tape-based exfoliation. Fast, damage-free, and reliable determination of the layer number of such 2D films is essential to study layer-dependent physics and promote device applications. Here, an optical method has been developed for simple, high throughput, and accurate determination of the layer number for Au-assisted exfoliated MoS$_2$ and WS$_2$ films in a broad thickness range. The method is based on quantitative analysis of layer-dependent white light reflection spectra, revealing that the reflection peak intensity can be used as a clear indicator for determining the layer number. The simple yet robust method will facilitate the fundamental study on layer-dependent optical, electrical, and thermal properties and device applications of 2D materials. The technique can also be readily combined with photoluminescence and Raman spectroscopies to study other layer-dependent physical properties of 2D materials. △ Less

Submitted 10 May, 2022; v1 submitted 4 May, 2022; originally announced May 2022.

Variational methods and deep Ritz method for active elastic solids

Authors: Haiqin Wang, Boyi Zou, Jian Su, Dong Wang, Xinpeng Xu

Abstract: Variational methods have been widely used in soft matter physics for both static and dynamic problems. These methods are mostly based on two variational principles: the variational principle of minimum free energy (MFEVP) and Onsager's variational principle (OVP). Our interests lie in the applications of these variational methods to active matter physics. In our former work [Soft Matter, 2021, 17,… ▽ More Variational methods have been widely used in soft matter physics for both static and dynamic problems. These methods are mostly based on two variational principles: the variational principle of minimum free energy (MFEVP) and Onsager's variational principle (OVP). Our interests lie in the applications of these variational methods to active matter physics. In our former work [Soft Matter, 2021, 17, 3634], we have explored the applications of OVP-based variational methods for the modeling of active matter dynamics. In the present work, we explore variational (or energy) methods that are based on MFEVP for static problems in active elastic solids. We show that MFEVP can be used not only to derive equilibrium equations, but also to develop approximate solution methods, such as Ritz method, for active solid statics. Moreover, the power of Ritz-type method can be further enhanced using deep learning methods if we use deep neural networks to construct the trial solutions of the variational problems. We then apply these variational methods and the deep Ritz method to study the spontaneous bending and contraction of a thin active circular plate that is induced by internal asymmetric active contraction. The circular plate is found to be bent towards its contracting side. The study of such a simple toy system gives implications for understanding the morphogenesis of solid-like confluent cell monolayers. In addition, we introduce a so-called activogravity length to characterize the importance of gravitational forces relative to internal active contraction in driving the bending of the active plate. When the lateral plate dimension is larger than the activogravity length (about 100 micron), gravitational forces become important. Such gravitaxis behaviors at multicellular scales may play significant roles in the morphogenesis and in the up-down symmetry broken during tissue development. △ Less

Submitted 26 June, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Comments: 19 pages, 8 figures

Journal ref: Soft Matter, 2022

Critical magnetic fields and electron-pairing in magic-angle twisted bilayer graphene

Authors: Wei Qin, Bo Zou, Allan H. MacDonald

Abstract: The velocities of the quasiparticles that form Cooper pairs in a superconductor are revealed by the upper critical magnetic field. Here we use this property to assess superconductivity in magic-angle twisted bilayer graphene (MATBG), which has been observed over a range of moiré band filling, twist angle, and screening environment conditions. We find that for pairing mechanisms that are unrelated… ▽ More The velocities of the quasiparticles that form Cooper pairs in a superconductor are revealed by the upper critical magnetic field. Here we use this property to assess superconductivity in magic-angle twisted bilayer graphene (MATBG), which has been observed over a range of moiré band filling, twist angle, and screening environment conditions. We find that for pairing mechanisms that are unrelated to correlations within the MATBG flat bands, minima in an average Fermi velocity $v_F^* \equiv k_B T_c \ell_c /\hbar $, where $\ell_c$ is the magnetic length at the critical perpendicular magnetic field, are always coincident with transition temperature maxima. Both extrema occur near flat-band van Hove singularities. Since no such association is present in MATBG experimental data, we conclude that electronic correlations that yield a band-filling-dependent pairing glue must play a crucial role in MATBG superconductivity. △ Less

Submitted 20 February, 2021; originally announced February 2021.

Comments: MS: 6 pages, 4 figures, SM: 13 pages, 7 figures

Ultrafast photomechanical transduction through thermophoretic implosion

Authors: Nikita Kavokine, Shuangyang Zou, Ruibin Liu, Antoine Niguès, Bingsuo Zou, Lydéric Bocquet

Abstract: Since the historical experiments of Crookes, the direct manipulation of matter by light has been both a challenge and a source of scientific debate. Here we show that laser illumination allows to displace a vial of nanoparticle solution over centimetre-scale distances. Cantilever-based force measurements show that the movement is due to millisecond long force spikes, which are synchronised with a… ▽ More Since the historical experiments of Crookes, the direct manipulation of matter by light has been both a challenge and a source of scientific debate. Here we show that laser illumination allows to displace a vial of nanoparticle solution over centimetre-scale distances. Cantilever-based force measurements show that the movement is due to millisecond long force spikes, which are synchronised with a sound emission. We observe that the nanoparticles undergo negative thermophoresis, while ultrafast imaging reveals that the force spikes are followed by the explosive growth of a bubble in the solution. We propose a mechanism accounting for the propulsion based on a thermophoretic instability of the nanoparticle cloud, analogous to the Jeans instability that occurs in gravitational systems. Our experiments demonstrate a new type of laser propulsion, and a remarkably violent actuation of soft matter, reminiscent of the strategy used by certain plants to propel their spores. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Journal ref: Nature Communications 11, 50 (2020)

Transition metal nitride thin films deposited at CMOS compatible temperatures for tunable optoelectronic and plasmonic devices

Authors: Ryan Bower, Daniel A. L. Loch, Andrey Berenov, Bin Zou, Papken Eh. Hovsepian, Arutiun P. Ehiasarian, Peter K. Petrov

Abstract: Transition metal nitrides have received significant interest for use within plasmonic and optoelectronic devices. However, deposition temperature remains a significant barrier to the integration of transition metal nitrides as plasmonic materials within CMOS fabrication processes. Binary, ternary and layered transition metal nitride thin films based on titanium and niobium nitride are deposited us… ▽ More Transition metal nitrides have received significant interest for use within plasmonic and optoelectronic devices. However, deposition temperature remains a significant barrier to the integration of transition metal nitrides as plasmonic materials within CMOS fabrication processes. Binary, ternary and layered transition metal nitride thin films based on titanium and niobium nitride are deposited using High Power Impulse Magnetron Sputtering (HIPIMS). The increased plasma densities achieved in the HIPIMS process allow high quality plasmonic thin films to be deposited at CMOS compatible temperatures of less than 300°C. Thin films are deposited on a range of industrially relevant substrates and display tunable plasma frequencies in the ultraviolet to visible spectral ranges. The thin film quality, combined with the scalability of the deposition process, indicates that HIPIMS deposition of nitride films is an industrially viable technique and can pave the way towards the fabrication of next generation plasmonic and optoelectronic devices. △ Less

Submitted 11 May, 2020; originally announced May 2020.

The anomalous Hall effect in non-collinear antiferromagnetic Mn$_{3}$NiN thin films

Authors: David Boldrin, Ilias Samathrakis, Jan Zemen, Andrei Mihai, Bin Zou, Bryan Esser, Dave McComb, Peter Petrov, Hongbin Zhang, Lesley F. Cohen

Abstract: We have studied the anomalous Hall effect (AHE) in strained thin films of the frustrated antiferromagnet Mn$_{3}$NiN. The AHE does not follow the conventional relationships with magnetization or longitudinal conductivity and is enhanced relative to that expected from the magnetization in the antiferromagnetic state below $T_{\mathrm{N}} = 260$\,K. This enhancement is consistent with origins from t… ▽ More We have studied the anomalous Hall effect (AHE) in strained thin films of the frustrated antiferromagnet Mn$_{3}$NiN. The AHE does not follow the conventional relationships with magnetization or longitudinal conductivity and is enhanced relative to that expected from the magnetization in the antiferromagnetic state below $T_{\mathrm{N}} = 260$\,K. This enhancement is consistent with origins from the non-collinear antiferromagnetic structure, as the latter is closely related to that found in Mn$_{3}$Ir and Mn$_{3}$Pt where a large AHE is induced by the Berry curvature. As the Berry phase induced AHE should scale with spin-orbit coupling, yet larger AHE may be found in other members of the chemically flexible Mn$_{3}A$N structure. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Journal ref: Phys. Rev. Materials 3, 094409 (2019)

Multiphase strontium molybdate thin films for plasmonic local heating applications

Authors: Matthew P. Wells, Bin Zou, Andrei P. Mihai, Ryan Bower, Anna Regoutz, Sarah Fearn, Stefan A. Maier, Neil McN. Alford, Peter K. Petrov

Abstract: In the search for alternative plasmonic materials SrMoO3 has recently been identified as possessing a number of desirable optical properties. Owing to the requirement for many plasmonic devices to operate at elevated temperatures however, it is essential to characterize the degradation of these properties upon heating. Here, SrMoO3 thin films are annealed in air at temperatures ranging from 75 - 5… ▽ More In the search for alternative plasmonic materials SrMoO3 has recently been identified as possessing a number of desirable optical properties. Owing to the requirement for many plasmonic devices to operate at elevated temperatures however, it is essential to characterize the degradation of these properties upon heating. Here, SrMoO3 thin films are annealed in air at temperatures ranging from 75 - 500° C. Characterizations by AFM, XRD, and spectroscopic ellipsometry after each anneal identify a loss of metallic behaviour after annealing at 500° C, together with the underlying mechanism. Moreover, it is shown that by annealing the films in nitrogen following deposition, an additional crystalline phase of SrMoO4 is induced at the film surface, which suppresses oxidation at elevated temperatures. △ Less

Submitted 8 March, 2018; originally announced March 2018.

Stability of Thin Film Refractory Plasmonic Materials Taken to High Temperatures in Air

Authors: Matthew P. Wells, Gomathi Gobalakrichenane, Ryan Bower, Bin Zou, Rebecca Kilmurray, Andrei P. Mihai, Neil McN. Alford, Rupert F. M. Oulton, Lesley F. Cohen, Stefan A. Maier, Anatoly V. Zayats, Peter K. Petrov

Abstract: Materials such as W, TiN, and SrRuO3 (SRO) have been suggested as promising alternatives to Au and Ag in plasmonic applications owing to their refractory properties. However, investigation of the reproducibility of the optical properties after thermal cycling at high operational temperatures is so far lacking. Here, thin films of W, Mo, Ti, TiN, TiON, Ag, Au, and SrRuO3 are investigated to assess… ▽ More Materials such as W, TiN, and SrRuO3 (SRO) have been suggested as promising alternatives to Au and Ag in plasmonic applications owing to their refractory properties. However, investigation of the reproducibility of the optical properties after thermal cycling at high operational temperatures is so far lacking. Here, thin films of W, Mo, Ti, TiN, TiON, Ag, Au, and SrRuO3 are investigated to assess their viability for robust refractory plasmonic applications. Films ranging in thickness from 50 - 180 nm are deposited on MgO and Si substrates by RF magnetron sputtering and, in the case of SrRuO3, pulsed laser deposition, prior to characterisation by means of AFM, XRD, spectroscopic ellipsometry, and DC resistivity. Measurements are conducted before and after annealing in air at temperatures ranging from 300 - 1000° C for one hour, to establish the maximum cycling temperature and potential longevity at temperature for each material. It is found that SrRuO3 retains metallic behaviour after annealing at 800° C, however, importantly, the optical properties of TiN and TiON are degraded as a result of oxidation. Nevertheless, both TiN and TiON may be better suited than Au or SRO for high temperature applications operating under vacuum conditions. △ Less

Submitted 24 November, 2017; originally announced November 2017.

Comments: 15 pages, 4 Figures, 3 Tables

Titanium oxynitride thin films with tunable double epsilon-near-zero behaviour

Authors: Laurentiu Braic, Nikolaos Vasilantonakis, Andrei P. Mihai, Ignacio J. Villar Garcia, Sarah Fearn, Bin Zou, Brock Doiron, Rupert F. Oulton, Lesley Cohen, Stefan A. Maier, Neil McN. Alford, Anatoly V. Zayats, Peter K. Petrov

Abstract: Titanium Oxynitride (TiOxNy) thin films are fabricated using reactive magnetron sputtering. The mechanism of their growth formation is explained and their optical properties are presented. The films grown when the level of residual Oxygen in the background vacuum was between 5E-9Torr to 20E-9Torr exhibit double Epsilon-Near-Zero (2-ENZ) behaviour with ENZ1 and ENZ2 wavelengths tunable in the 700-8… ▽ More Titanium Oxynitride (TiOxNy) thin films are fabricated using reactive magnetron sputtering. The mechanism of their growth formation is explained and their optical properties are presented. The films grown when the level of residual Oxygen in the background vacuum was between 5E-9Torr to 20E-9Torr exhibit double Epsilon-Near-Zero (2-ENZ) behaviour with ENZ1 and ENZ2 wavelengths tunable in the 700-850 nm and in the 1100-1350 nm spectral ranges, respectively. Samples fabricated when the level of residual Oxygen in the background vacuum was above 2E-8Torr exhibit non-metallic behaviour, while the layers deposited when the level of residual Oxygen in the background vacuum was below 5E-9Torr, show metallic behaviour with a single ENZ value. The double ENZ phenomenon is related to the level of residual Oxygen in the background vacuum and is attributed to the mixture of TiN and TiOxNy/TiOx phases in the films. Varying the partial pressure of nitrogen during the deposition can further control the amount of TiN, TiOx and TiOxNy compounds in the films and, therefore, tune the screened plasma wavelength. A good approximation of the ellipsometric behaviour is achieved with Maxwell-Garnett theory for a composite film formed by a mixture of TiO2 and TiN phases suggesting that double ENZ TiOxNy films are formed by inclusions of TiN within a TiO2 matrix. These oxynitride compounds could be considered as new materials exhibiting double ENZ in the visible and near-IR spectral ranges. △ Less

Submitted 28 March, 2017; originally announced March 2017.

EMP Lasing from Mn doped lead bromide perovskites nanorods

Authors: Shuangyang Zou, Zhihong Gong, Lipeng Hou, Ruibin Liu, Haizheng Zhong, Bingsuo Zou

Abstract: Diluted magnetic semiconductor (DMS) nanostructures are promising platform to modulate carriers and spins for new information devices. Here we report that the high quality pure CH3NH3PbBr3 nanorods and Mn doped CH3NH3PbBr3 nanorods have been prepared by solution method and in which the exciton magnetic polarons (EMP) formed in Mn doped NRs, and a single mode lasing phenomenon from collective EMP i… ▽ More Diluted magnetic semiconductor (DMS) nanostructures are promising platform to modulate carriers and spins for new information devices. Here we report that the high quality pure CH3NH3PbBr3 nanorods and Mn doped CH3NH3PbBr3 nanorods have been prepared by solution method and in which the exciton magnetic polarons (EMP) formed in Mn doped NRs, and a single mode lasing phenomenon from collective EMP in single NR have been detected when excited by fs pulse laser. This finding helps to understand the exciton and spin interactions and pave ways to the realization of new type of bosonic laser. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Comments: this manscript have 4 pagers, 4 figures

Tunable, Low Optical Loss Strontium Molybdate Thin Films for Plasmonic Applications

Authors: Matthew P. Wells, Bin Zou, Brock Doiron, Rebecca Kilmurray, Andrei P. Mihai, Rupert F. M. Oulton, Lesley F. Cohen, Stefan A. Maier, Neil McN. Alford, Peter K. Petrov

Abstract: Strontium molybdate (SrMoO3) thin films are shown to exhibit plasmonic behaviour with a zero crossover wavelength of the real part of the dielectric permittivity tunable between 600 and 950 nm (2.05 eV and 1.31 eV). The films are grown epitaxially on strontium titanate (SrTiO3), magnesium oxide (MgO), and lanthanum aluminate (LaAlO3) substrates by pulsed laser deposition. SrMoO3 is shown to have o… ▽ More Strontium molybdate (SrMoO3) thin films are shown to exhibit plasmonic behaviour with a zero crossover wavelength of the real part of the dielectric permittivity tunable between 600 and 950 nm (2.05 eV and 1.31 eV). The films are grown epitaxially on strontium titanate (SrTiO3), magnesium oxide (MgO), and lanthanum aluminate (LaAlO3) substrates by pulsed laser deposition. SrMoO3 is shown to have optical losses lower than those of gold at the point at which the real part of the dielectric permittivity is equal to -2, while possessing low electrical resistivity of 100E-6 Ohm cm at room temperature. Spectroscopic ellipsometry measurements reveal that SrMoO3 shows plasmonic behaviour, moreover we demonstrate that the epsilon near zero (ENZ) wavelength is tunable by engineering the residual strain in the films. The relatively broadband ENZ behaviour observed in SrMoO3 demonstrates its potential suitability for transformation optics along with plasmonic applications in the visible to near infrared spectral range. △ Less

Submitted 10 November, 2016; v1 submitted 4 November, 2016; originally announced November 2016.

Comments: 13 pages, 5 figures

Pressure-induced reversible phase transition and amorphization of CH$_3$NH$_3$PbI$_3$

Authors: Kai Wang, Ran Liu, Yuancun Qiao, Jinxing Cui, Bo Song, Bingbing Liu, Bo Zou

Abstract: Recent advances of highly efficient solar cells based on organic-inorganic halide perovskites have triggered intense research efforts to establish the fundamental properties of these materials. In this work, we utilized diamond anvil cell to investigate the pressure-induced structural and electronic transformations in methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) up to 7 GPa at room temperature… ▽ More Recent advances of highly efficient solar cells based on organic-inorganic halide perovskites have triggered intense research efforts to establish the fundamental properties of these materials. In this work, we utilized diamond anvil cell to investigate the pressure-induced structural and electronic transformations in methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) up to 7 GPa at room temperature. The synchrotron X-ray diffraction experiment show that the sample transformed from tetragonal to orthorhombic phase at 0.3 GPa and amorphized above 4 GPa. Further high pressure IR spectroscopy experiments illustrated the high pressure behavior of organic (CH$_3$NH$_3$)$^+$ cations. We also analyzed the pressure dependence of the band gap energy based on the optical absorption and photoluminescence (PL) results. Moreover, all the observed changes were fully reversible when the pressure was completely released. Our in situ high pressure studies provide essential information for the intrinsic properties and stability of organic-inorganic halide perovskites, which significantly affect the performance of perovskite solar cells. △ Less

Submitted 12 September, 2015; originally announced September 2015.

Comments: 24 pages, 7 figures

Suppression of space broadening of exciton polariton beams by Bloch oscillation effects

Authors: Xudong Duan, Bingsuo Zou, Yongyou Zhang

Abstract: We theoretically study the transport of exciton polaritons under different applied photon potentials. The relation between the photon potentials and the thickness of the cavity layer is calculated by the finite element simulation. The theoretical analysis and numerical calculation indicate that the cavity photon potential is proportional to the thickness of the cavity layer with the coefficient be… ▽ More We theoretically study the transport of exciton polaritons under different applied photon potentials. The relation between the photon potentials and the thickness of the cavity layer is calculated by the finite element simulation. The theoretical analysis and numerical calculation indicate that the cavity photon potential is proportional to the thickness of the cavity layer with the coefficient being about $1.8$ meV/nm. Further, the periodic and linear photon potentials are considered to control the transport of the exciton polaritons in weak- and strong-field pump situations. In both situations the periodic potential cannot by itself effectively suppress the scatterings of the disorder potentials of the cavity photons and excitons and the nonlinear exciton-exciton interaction. When the linear potential is added to the cavity photons, the polariton transport exhibits the Bloch oscillation behavior. Importantly, the polariton Bloch oscillation can strongly suppress the space broadening due to the disorder potentials and nonlinear exciton-exciton interaction, which is beneficial for designing the polariton circuits. △ Less

Submitted 30 May, 2015; v1 submitted 21 May, 2015; originally announced May 2015.

Comments: 7 pages, 8 figures

Nonlocal coupling effects on single-photon transmission in a one-dimensional waveguide interacted with a side optical cavity

Authors: Yongyou Zhang, Bingsuo Zou

Abstract: The nonlocal coupling effect between a one-dimensional waveguide (1DW) and a side optical cavity (SOC) is studied. We first find the real-space Hamiltonian of the nonlocal-coupling system of the 1DW and SOC, and then derive out an equation determining the energy of the hybridization state between the 1DW and SOC modes and an analytic formula for the single-photon transmission. Through them, we rec… ▽ More The nonlocal coupling effect between a one-dimensional waveguide (1DW) and a side optical cavity (SOC) is studied. We first find the real-space Hamiltonian of the nonlocal-coupling system of the 1DW and SOC, and then derive out an equation determining the energy of the hybridization state between the 1DW and SOC modes and an analytic formula for the single-photon transmission. Through them, we recognize that the single-photon transmission-dip position can be changed by adjusting the SOC size and the coupling strength between the 1DW and SOC. The transmission spectra strongly depends on the nonlocal-coupling function between the 1DW and SOC, and holds an asymmetry line shape. At last, we simulate the asymmetry of the single-photon transmission by a gold-based waveguide coupled with a rectangular SOC. △ Less

Submitted 29 April, 2014; originally announced May 2014.

Comments: 8 pages, 6 figures

Mechano-freezing of the ambient water

Authors: Xi Zhang, Tingting Yan, Bo Zou, Chang Q Sun

Abstract: Raman spectroscopy examination of the 25 deg-C water freezing under compression revealed transition from 1.35 GPa to 0.86 GPa upon ice being formed at continued volume change. The transition is associated with a slight blue shift of the high-frequency phonon (omiga_H ~ 3120 cm-1) and creation of the low-frequency phonons (Omiga_L ~ 200 cm-1). In the liquid and in the solid phase, the increased pre… ▽ More Raman spectroscopy examination of the 25 deg-C water freezing under compression revealed transition from 1.35 GPa to 0.86 GPa upon ice being formed at continued volume change. The transition is associated with a slight blue shift of the high-frequency phonon (omiga_H ~ 3120 cm-1) and creation of the low-frequency phonons (Omiga_L ~ 200 cm-1). In the liquid and in the solid phase, the increased pressure softens the Omiga_H and stiffens the Omida_L, which indicates the presence of the inter-electron-pair repulsion in both liquid and solid water. △ Less

Submitted 5 October, 2013; originally announced October 2013.

The study of high pressure structural stability of CeO2 nanoparticles

Authors: Bo Liu, Ran Liu, Quan-Jun Li, Ming-Guang Yao, Bo Zou, Tian Cui, Bing-Bing Liu

Abstract: In situ high pressure XRD diffraction and Raman spectroscopy have been performed on 12 nm CeO2 nanoparticles. Surprisingly, under quasihydrostatic condition, 12 nm CeO2 nanoparticles maintain the fluorite-type structure in the whole pressure range (0-51 GPa) during the experiments, much more stable than the bulk counterpart (PT=31 GPa). In contrast, they experienced phase transition at pressure as… ▽ More In situ high pressure XRD diffraction and Raman spectroscopy have been performed on 12 nm CeO2 nanoparticles. Surprisingly, under quasihydrostatic condition, 12 nm CeO2 nanoparticles maintain the fluorite-type structure in the whole pressure range (0-51 GPa) during the experiments, much more stable than the bulk counterpart (PT=31 GPa). In contrast, they experienced phase transition at pressure as low as 26 GPa under non-hydrostatic condition (adopting CsCl as pressure medium). Additionally, 32-36 nm CeO2 nanoparticles exhibit an onset pressure of phase transition at 35GPa under quasihydrostatic condition, and this onset pressure is much lower than our result. Further analysis shows both the experimental condition (i.e., quasihydrostatic or non-hydrostatic) and grain size effect have a significant impact on the high pressure behaviors of CeO2 nanomaterials. △ Less

Submitted 14 May, 2013; originally announced May 2013.

Comments: 10 pages,7 figures, Chinese Physics C

Pressure-induced amorphization and polyamorphism in one-dimensional single crystal TiO2 nanomaterials

Authors: Quanjun Li, Bingbing Liu, Lin Wang, Dongmei Li, Ran Liu, Bo Zou, Tian Cui, Guangtian Zou, Yue Meng, Ho-kwang Mao, Zhenxian Liu, Jing Liu, Jixue Li

Abstract: The structural phase transitions of single crystal TiO2-B nanoribbons were investigated in-situ at high-pressure using the synchrotron X-ray diffraction and the Raman scattering. Our results have shown a pressure-induced amorphization (PIA) occurred in TiO2-B nanoribbons upon compression, resulting in a high density amorphous (HDA) form related to the baddeleyite structure. Upon decompression, the… ▽ More The structural phase transitions of single crystal TiO2-B nanoribbons were investigated in-situ at high-pressure using the synchrotron X-ray diffraction and the Raman scattering. Our results have shown a pressure-induced amorphization (PIA) occurred in TiO2-B nanoribbons upon compression, resulting in a high density amorphous (HDA) form related to the baddeleyite structure. Upon decompression, the HDA form transforms to a low density amorphous (LDA) form while the samples still maintain their pristine nanoribbon shape. HRTEM imaging reveals that the LDA phase has an α-PbO2 structure with short range order. We propose a homogeneous nucleation mechanism to explain the pressure-induced amorphous phase transitions in the TiO2-B nanoribbons. Our study demonstrates for the first time that PIA and polyamorphism occurred in the one-dimensional (1D) TiO2 nanomaterials and provides a new method for preparing 1D amorphous nanomaterials from crystalline nanomaterials. △ Less

Submitted 16 January, 2012; originally announced January 2012.

Comments: 4 figures

Journal ref: Journal of Physical Chemistry Letters, 2010, 1, 309-314

Ethylene glycol-mediated synthesis of nanoporous anatase TiO2 rods and rutile TiO2 self-assembly chrysanthemums

Authors: Quanjun Li, Bingbing Liu, Yingai Li, Ran Liu, Xianglin Li, Shidan Yu, Dedi Liu, Peng Wang, Bo Zou, Tian Cui, Guangtian Zou

Abstract: Nanoporous anatase TiO2 rods and rutile TiO2 chrysanthemums were successfully synthesized via a simple ethylene glycol-mediated synthesis route. Their morphologies, phase compositions and components were characterized by SEM, TEM, Raman and IR, respectively. The results show that a self-assembly growth takes place in the calcination under vacuum, which makes the titanium glycolate rods transform i… ▽ More Nanoporous anatase TiO2 rods and rutile TiO2 chrysanthemums were successfully synthesized via a simple ethylene glycol-mediated synthesis route. Their morphologies, phase compositions and components were characterized by SEM, TEM, Raman and IR, respectively. The results show that a self-assembly growth takes place in the calcination under vacuum, which makes the titanium glycolate rods transform into rutile TiO2/C chrysanthemums rather than anatase TiO2 rods. It also indicates that the carbon plays an important role in the phase transition process which promotes the phase transition to rutile TiO2 at a lower temperature (400 oC). It provides a new approach to prepare nanoporous rutile TiO2 nanomaterials under low temperature. △ Less

Submitted 18 March, 2012; v1 submitted 21 December, 2011; originally announced December 2011.

Journal ref: Journal of Alloys and Compounds,Volume 471, Issues 1-2, 5 March 2009, Pages 477-480

Strong Visible Absorption and Photoluminescence of Titanic Acid Nanotubes by Hydrothermal Method

Authors: Baoli Tian, Xing Zhang, Shuxi Dai, Ke Cheng, Zhensheng Jin, Yabin Huang, Zuliang Du, Guangtian Zou, Bingsuo Zou

Abstract: Titanic acid nanotubes (with a chemical formula H2Ti2O4(OH)2, abbreviated as TANTs) were synthesized by the hydrothermal method using commercial TiO2 nanoparticle powder (P25, Degussa, Germany) including anatase and rutile phase as a starting material. Conversion from nanoparticles to nanotubes was achieved by treating the nanoparticle powder with 10 M NaOH aqueous solution. Absorption and photolu… ▽ More Titanic acid nanotubes (with a chemical formula H2Ti2O4(OH)2, abbreviated as TANTs) were synthesized by the hydrothermal method using commercial TiO2 nanoparticle powder (P25, Degussa, Germany) including anatase and rutile phase as a starting material. Conversion from nanoparticles to nanotubes was achieved by treating the nanoparticle powder with 10 M NaOH aqueous solution. Absorption and photoluminescence (PL) data indicate that the nanotubes obtained under slow and suitable drying and heating conditions had very strong and stable visible absorption with three peaks at 515, 575, and 675 nm and photoluminescence at room temperature in air. △ Less

Submitted 13 June, 2011; originally announced June 2011.

Comments: 4 pages, 6 figures

Journal ref: Journal of physical chemistry. C , 2008, vol. 112, no14, pp. 5361-5364

Physical origin of superconductivity in EuFe2As1.4P0.6 and EuFe2As2: pressure-induce valence change of europium

Authors: Liling Sun, Jing Guo, Genfu Chen, Xianhui Chen, Xiaoli Dong, Wei Lu, Chao Zhang, Zheng Jiang, Bo Zou, Yuying Huang, Qi Wu, Xi Dai, Zhongxian Zhao

Abstract: Superconductivity can be realized in Eu-containing pnictides by application of chemical (internal) and physical (external) pressure, the intrinsic physical mechanism of which attracts much attention in physics community. Here we present the experimental evidence for the valence change of europium in compounds of EuFe2As1.4P0.6 exposed to ambient pressure and EuFe2As2 to high pressure by x-ray abso… ▽ More Superconductivity can be realized in Eu-containing pnictides by application of chemical (internal) and physical (external) pressure, the intrinsic physical mechanism of which attracts much attention in physics community. Here we present the experimental evidence for the valence change of europium in compounds of EuFe2As1.4P0.6 exposed to ambient pressure and EuFe2As2 to high pressure by x-ray absorption measurements on L3-Eu edge. We find that the absorption spectrum of EuFe2As1.4P0.6 at ambient pressure shows clear spectra weight transfer from a divalent to a trivalent state. Furthermore, application of pressure on EuFe2As2 using a diamond anvil cell shows a similar behavior of valence transition as EuFe2As1.4P0.6. These findings are the first observation of superconductivity mechanized by valence change in pnictides superconductors and elucidate the intrinsic physical origin of superconductivity in EuFe2As1.4P0.6 and compressed EuFe2As2. △ Less

Submitted 19 May, 2010; originally announced May 2010.

Comments: 13 pages, 3 fifures

Journal ref: Phys. Rev .B, 82 (2010) 134509