-
Multi-task Photonic Reservoir Computing: Wavelength Division Multiplexing for Parallel Computing with a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Nowadays, as the ever-increasing demand for more powerful computing resources continues, alternative advanced computing paradigms are under extensive investigation. Significant effort has been made to deviate from conventional Von Neumann architectures. In-memory computing has emerged in the field of electronics as a possible solution to the infamous bottleneck between memory and computing process…
▽ More
Nowadays, as the ever-increasing demand for more powerful computing resources continues, alternative advanced computing paradigms are under extensive investigation. Significant effort has been made to deviate from conventional Von Neumann architectures. In-memory computing has emerged in the field of electronics as a possible solution to the infamous bottleneck between memory and computing processors, which reduces the effective throughput of data. In photonics, novel schemes attempt to collocate the computing processor and memory in a single device. Photonics offers the flexibility of multiplexing streams of data not only spatially and in time, but also in frequency or, equivalently, in wavelength, which makes it highly suitable for parallel computing. Here, we numerically show the use of time and wavelength division multiplexing (WDM) to solve four independent tasks at the same time in a single photonic chip, serving as a proof of concept for our proposal. The system is a time-delay reservoir computing (TDRC) based on a microring resonator (MRR). The addressed tasks cover different applications: Time-series prediction, waveform signal classification, wireless channel equalization, and radar signal prediction. The system is also tested for simultaneous computing of up to 10 instances of the same task, exhibiting excellent performance. The footprint of the system is reduced by using time-division multiplexing of the nodes that act as the neurons of the studied neural network scheme. WDM is used for the parallelization of wavelength channels, each addressing a single task. By adjusting the input power and frequency of each optical channel, we can achieve levels of performance for each of the tasks that are comparable to those quoted in state-of-the-art reports focusing on single-task operation...
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
Memory Capacity Analysis of Time-delay Reservoir Computing Based on Silicon Microring Resonator Nonlinearities
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Francesco Da Ros
Abstract:
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide…
▽ More
Silicon microring resonators (MRRs) have shown strong potential in acting as the nonlinear nodes of photonic reservoir computing (RC) schemes. By using nonlinearities within a silicon MRR, such as the ones caused by free-carrier dispersion (FCD) and thermo-optic (TO) effects, it is possible to map the input data of the RC to a higher dimensional space. Furthermore, by adding an external waveguide between the through and add ports of the MRR, it is possible to implement a time-delay RC (TDRC) with enhanced memory. The input from the through port is fed back into the add port of the ring with the delay applied by the external waveguide effectively adding memory. In a TDRC, the nodes are multiplexed in time, and their respective time evolutions are detected at the drop port. The performance of MRR-based TDRC is highly dependent on the amount of nonlinearity in the MRR. The nonlinear effects, in turn, are dependent on the physical properties of the MRR as they determine the lifetime of the effects. Another factor to take into account is the stability of the MRR response, as strong time-domain discontinuities at the drop port are known to emerge from FCD nonlinearities due to self-pulsing (high nonlinear behaviour). However, quantifying the right amount of nonlinearity that RC needs for a certain task in order to achieve optimum performance is challenging. Therefore, further analysis is required to fully understand the nonlinear dynamics of this TDRC setup. Here, we quantify the nonlinear and linear memory capacity of the previously described microring-based TDRC scheme, as a function of the time constants of the generated carriers and the thermal of the TO effects. We analyze the properties of the TDRC dynamics that generate the parameter space, in terms of input signal power and frequency detuning range, over which conventional RC tasks can be satisfactorily performed by the TDRC scheme.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Multi-Task Wavelength-Multiplexed Reservoir Computing Using a Silicon Microring Resonator
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on…
▽ More
Among the promising advantages of photonic computing over conventional computing architectures is the potential to increase computing efficiency through massive parallelism by using the many degrees of freedom provided by photonics. Here, we numerically demonstrate the simultaneous use of time and frequency (equivalently wavelength) multiplexing to solve three independent tasks at the same time on the same photonic circuit. In particular, we consider a microring-based time-delay reservoir computing (TDRC) scheme that simultaneously solves three tasks: Time-series prediction, classification, and wireless channel equalization. The scheme relies on time-division multiplexing to avoid the necessity of multiple physical nonlinear nodes, while the tasks are parallelized using wavelength division multiplexing (WDM). The input data modulated on each optical channel is mapped to a higher dimensional space by the nonlinear dynamics of the silicon microring cavity. The carrier wavelength and input power assigned to each optical channel have a high influence on the performance of its respective task. When all tasks operate under the same wavelength/power conditions, our results show that the computing nature of each task is the deciding factor of the level of performance achievable. However, it is possible to achieve good performance for all tasks simultaneously by optimizing the parameters of each optical channel. The variety of applications covered by the tasks shows the versatility of the proposed photonic TDRC scheme. Overall, this work provides insight into the potential of WDM-based schemes for improving the computing capabilities of reservoir computing schemes.
△ Less
Submitted 27 April, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Effects of cavity nonlinearities and linear losses on silicon microring-based reservoir computing
Authors:
Bernard J. Giron Castro,
Christophe Peucheret,
Darko Zibar,
Francesco Da Ros
Abstract:
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series t…
▽ More
Microring resonators (MRRs) are promising devices for time-delay photonic reservoir computing, but the impact of the different physical effects taking place in the MRRs on the reservoir computing performance is yet to be fully understood. We numerically analyze the impact of linear losses as well as thermo-optic and free-carrier effects relaxation times on the prediction error of the time-series task NARMA-10. We demonstrate the existence of three regions, defined by the input power and the frequency detuning between the optical source and the microring resonance, that reveal the cavity transition from linear to nonlinear regimes. One of these regions offers very low error in time-series prediction under relatively low input power and number of nodes while the other regions either lack nonlinearity or become unstable. This study provides insight into the design of the MRR and the optimization of its physical properties for improving the prediction performance of time-delay reservoir computing.
△ Less
Submitted 22 December, 2023; v1 submitted 13 October, 2023;
originally announced October 2023.
-
Polarized microwave emission from space particles in the upper atmosphere of the Earth
Authors:
Jennifer López-Viejobueno,
Leire Beitia-Antero,
Ana I. Gómez de Castro
Abstract:
Tons of space particles enter the Earth atmosphere every year, being detected when they produce fireballs, meteor showers, or when they impact the Earth surface. Particle detection in the showers could also be attempted from space using satellites in low Earth orbit. Measuring the polarization would provide extra crucial information on the dominant alignment mechanisms and the properties of the me…
▽ More
Tons of space particles enter the Earth atmosphere every year, being detected when they produce fireballs, meteor showers, or when they impact the Earth surface. Particle detection in the showers could also be attempted from space using satellites in low Earth orbit. Measuring the polarization would provide extra crucial information on the dominant alignment mechanisms and the properties of the meteor families. In this article, we evaluate the expected signal to aid in the design of space probes for this purpose. We have used the RADMC-3D code to simulate the polarized microwave emission of aligned dust particles with different compositions: silicates, carbonates and irons. We have assumed a constant spatial particle density distribution of 0.22 cm$^{-3}$, based on particle density measurements carried during meteor showers. Four different grain size distributions with power indices ranging from $-3.5$ to $-2.0$ and dust particles with radius ranging from 0.01 $\mathrmμ$m to 1 cm have been considered for the simulations. Silicates and carbonates align their minor axis with the direction of the solar radiation field; during the flight time into the Earth atmosphere, iron grains get oriented with the Earth's magnetic field depending on their size. Alignment direction is reflected in the $Q$-Stokes parameter and in the polarization variation along the orbit. Polarization depends on the composition and on the size distribution of the particles. The simulations show that some specific particle populations might be detectable even with a small probe equipped with high sensitivity, photon-counting microwave detectors operating in low Earth orbit.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
On error-based step size control for discontinuous Galerkin methods for compressible fluid dynamics
Authors:
Hendrik Ranocha,
Andrew R. Winters,
Hugo Guillermo Castro,
Lisandro Dalcin,
Michael Schlottke-Lakemper,
Gregor J. Gassner,
Matteo Parsani
Abstract:
We study temporal step size control of explicit Runge-Kutta methods for compressible computational fluid dynamics (CFD), including the Navier-Stokes equations and hyperbolic systems of conservation laws such as the Euler equations. We demonstrate that error-based approaches are convenient in a wide range of applications and compare them to more classical step size control based on a Courant-Friedr…
▽ More
We study temporal step size control of explicit Runge-Kutta methods for compressible computational fluid dynamics (CFD), including the Navier-Stokes equations and hyperbolic systems of conservation laws such as the Euler equations. We demonstrate that error-based approaches are convenient in a wide range of applications and compare them to more classical step size control based on a Courant-Friedrichs-Lewy (CFL) number. Our numerical examples show that error-based step size control is easy to use, robust, and efficient, e.g., for (initial) transient periods, complex geometries, nonlinear shock capturing approaches, and schemes that use nonlinear entropy projections. We demonstrate these properties for problems ranging from well-understood academic test cases to industrially relevant large-scale computations with two disjoint code bases, the open source Julia packages Trixi.jl with OrdinaryDiffEq.jl and the C/Fortran code SSDC based on PETSc.
△ Less
Submitted 16 February, 2023; v1 submitted 15 September, 2022;
originally announced September 2022.
-
The Flexible Plasma Trap (FPT) for the production of overdense plasmas
Authors:
S. Gammino,
L. Celona,
D. Mascali,
G. Castro,
G. Torrisi,
L. Neri,
M. Mazzaglia,
G. Sorbello,
O. Leonardi,
L. Allegra,
G. Calabrese,
F. Chines,
G. Gallo,
S. Passerello
Abstract:
Electron Cyclotron Resonance Ion Sources are currently the most efficient ion sources among those used in facilities dedicated to nuclear physics. The need for a more flexible magnetic field and RF injection system suggested to design and develop a different type of plasma trap, named Flexible Plasma Trap (FPT). The magnetic field of FPT is generated by means of three coils while microwaves in the…
▽ More
Electron Cyclotron Resonance Ion Sources are currently the most efficient ion sources among those used in facilities dedicated to nuclear physics. The need for a more flexible magnetic field and RF injection system suggested to design and develop a different type of plasma trap, named Flexible Plasma Trap (FPT). The magnetic field of FPT is generated by means of three coils while microwaves in the range 4-7 GHz can be injected by three different inputs, one placed along the axis and two placed radially. FPT can work in different plasma heating schemes so it will be an ideal tool for studies of plasma and multidisciplinary physics. Moreover, a microwave launcher has been designed and installed to the FPT for launching microwaves with a variable tilt angle with respect to the magnetic field. This paper describes the characteristics of the FPT along with the preliminary results of plasma diagnostics.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Numerical and Experimental Characterization of RF Waves Propagation in Ion Sources Magnetoplasmas
Authors:
G. Torrisi,
D. Mascali,
G. Sorbello,
G. Castro,
L. Celona,
S. Gammino
Abstract:
This paper describes three-dimensional numerical simulations and Radio Frequency (RF) measurements of wave propagation in microwave-heated magnetized plasmas of ion sources. Full-wave solution of Maxwell's equations has been addressed through the Finite Element Method (FEM) commercial software COMSOL. Our numerical model takes into account the strongly inhomogeneous and anisotropic magnetized "col…
▽ More
This paper describes three-dimensional numerical simulations and Radio Frequency (RF) measurements of wave propagation in microwave-heated magnetized plasmas of ion sources. Full-wave solution of Maxwell's equations has been addressed through the Finite Element Method (FEM) commercial software COMSOL. Our numerical model takes into account the strongly inhomogeneous and anisotropic magnetized "cold" plasma medium. The simulations reproduce the main features of the wave-plasma interaction of the Flexible Plasma Trap (FPT) that recently came into operations at INFN-LNS. A two-pins RF probe has been ad-hoc developed and used as a plasmaimmersed antenna for measuring local wave electric fields in the FPT device. The measurements of plasma electron density and RF electric field, performed for different external magnetic field configuration, allowed a direct comparison with the assumed simulation model.
△ Less
Submitted 3 January, 2022; v1 submitted 31 December, 2021;
originally announced December 2021.
-
Pile-Up Mitigation using Attention
Authors:
Benedikt Maier,
Siddharth M. Narayanan,
Gianfranco de Castro,
Maxim Goncharov,
Christoph Paus,
Matthias Schott
Abstract:
Particle production from secondary proton-proton collisions, commonly referred to as pile-up, impair the sensitivity of both new physics searches and precision measurements at LHC experiments. We propose a novel algorithm, PUMA, for identifying pile-up objects with the help of deep neural networks based on sparse transformers. These attention mechanisms were developed for natural language processi…
▽ More
Particle production from secondary proton-proton collisions, commonly referred to as pile-up, impair the sensitivity of both new physics searches and precision measurements at LHC experiments. We propose a novel algorithm, PUMA, for identifying pile-up objects with the help of deep neural networks based on sparse transformers. These attention mechanisms were developed for natural language processing but have become popular in other applications. In a realistic detector simulation, our method outperforms classical benchmark algorithms for pile-up mitigation in key observables. It provides a perspective for mitigating the effects of pile-up in the high luminosity era of the LHC, where up to 200 proton-proton collisions are expected to occur simultaneously.
△ Less
Submitted 2 November, 2022; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Spin dependent analysis of homogeneous and inhomogeneous exciton decoherence in magnetic fields
Authors:
V. Laurindo Jr.,
E. D. Guarin Castro,
G. M. Jacobsen,
E. R. C. de Oliveira,
J. F. M. Domenegueti,
B. Alén,
Yu. I. Mazur,
G. J. Salamo,
G. E. Marques,
E. Marega Jr.,
M. D. Teodoro,
V. Lopez-Richard
Abstract:
This paper discusses the combined effects of optical excitation power, interface roughness, lattice temperature, and applied magnetic fields on the spin-coherence of excitonic states in GaAs/AlGaAs multiple quantum wells. For low optical powers, at lattice temperatures between 4 K and 50 K, the scattering with acoustic phonons and short-range interactions appear as the main decoherence mechanisms.…
▽ More
This paper discusses the combined effects of optical excitation power, interface roughness, lattice temperature, and applied magnetic fields on the spin-coherence of excitonic states in GaAs/AlGaAs multiple quantum wells. For low optical powers, at lattice temperatures between 4 K and 50 K, the scattering with acoustic phonons and short-range interactions appear as the main decoherence mechanisms. Statistical fluctuations of the band-gap however become also relevant in this regime and we were able to deconvolute them from the decoherence contributions. The circularly polarized magneto-photoluminescence unveils a non-monotonic tuning of the coherence for one of the spin components at low magnetic fields. This effect has been ascribed to the competition between short-range interactions and spin-flip scattering, modulated by the momentum relaxation time.
△ Less
Submitted 4 January, 2022; v1 submitted 5 July, 2021;
originally announced July 2021.
-
A new amplification structure for time projection chambers based on electroluminescence
Authors:
D. González-Díaz,
M. Fontaíña,
D. García Castro,
B. Mehl,
R. de Oliveira,
S. Williams,
F. Monrabal,
M. Querol,
V. Álvarez
Abstract:
A simple hole-type secondary scintillation structure (2 mm-hole, 5 mm-pitch, 5 mm-thickness) is introduced and its operation demonstrated in pure xenon in the pressure range 2-10 bar. The new device, characteristically translucent, has been manufactured through a collaboration between IGFAE and the CERN workshop, and relies entirely on radiopure materials (acrylic and copper), being extremely rugg…
▽ More
A simple hole-type secondary scintillation structure (2 mm-hole, 5 mm-pitch, 5 mm-thickness) is introduced and its operation demonstrated in pure xenon in the pressure range 2-10 bar. The new device, characteristically translucent, has been manufactured through a collaboration between IGFAE and the CERN workshop, and relies entirely on radiopure materials (acrylic and copper), being extremely rugged in the presence of sparks, mechanically robust, and easily scalable, yet made through a relatively simple process. With an overall figure (at 10 bar) characterized by an energy resolution of 18.9%(FWHM) for $^{55}$Fe x-rays, an optical gain of m$_γ$ = 500 ph/e, and a stable operation at reduced fields more than twice those of some of the presently running experiments ($E_{EL}=3$ kV/cm/bar), this family of structures seems to show great promise for electroluminescence readouts on large scale detectors. As argued below, further improvements have the potential of bringing the energy resolution close to the Fano factor and increasing the optical gain.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
TRAGALDABAS. First results on cosmic ray studies and their relation with the solar activity, the Earth magnetic field and the atmospheric properties
Authors:
J. A. Garzón,
J. Collazo,
J. Cuenca-García,
D. Garcí a Castro,
J. Otero,
M. Yermo,
J. J. Blanco,
T. Kurtukian,
A. Morozova,
M. A. Pais,
A. Blanco,
P. Fonte,
L. Lopes,
G. Kornakov,
H. Álvarez-Pol,
P. Cabanelas,
A. Pazos,
M. Seco,
I. Riádigos,
V. Pérez Muñuzuri,
A. Gómez-Tato,
J. C. Mouriño,
P. Rey,
J. Taboada
Abstract:
Cosmic rays originating from extraterrestrial sources are permanently arriving at Earth atmosphere, where they produce up to billions of secondary particles. The analysis of the secondary particles reaching to the surface of the Earth may provide a very valuable information about the Sun activity, changes in the geomagnetic field and the atmosphere, among others. In this article, we present the fi…
▽ More
Cosmic rays originating from extraterrestrial sources are permanently arriving at Earth atmosphere, where they produce up to billions of secondary particles. The analysis of the secondary particles reaching to the surface of the Earth may provide a very valuable information about the Sun activity, changes in the geomagnetic field and the atmosphere, among others. In this article, we present the first preliminary results of the analysis of the cosmic rays measured with a high resolution tracking detector, TRAGALDABAS, located at the Univ. of Santiago de Compostela, in Spain.
△ Less
Submitted 25 January, 2017;
originally announced January 2017.
-
IsoDAR@KamLAND: A Conceptual Design Report for the Technical Facility
Authors:
M. Abs,
A. Adelmann,
J. R Alonso,
S. Axani,
W. A. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
L. Calabretta,
A. Calanna,
D. Campo,
G. Castro,
L. Celona,
G. H. Collin,
J. M. Conrad,
S. Gammino,
R. Johnson,
G. Karagiorgi,
S. Kayser,
W. Kleeven,
A. Kolano,
F. Labrecque,
W. A. Loinaz,
J. Minervini,
M. H. Moulai
, et al. (15 additional authors not shown)
Abstract:
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation…
▽ More
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation at KamLAND, and identified needs for future development. We discuss the risks we have identified and our approach to mitigating those risks with this design. A substantial portion of the conceptual design is based on three years of experimental efforts and on industry experience. This report also includes information on the conventional facilities.
△ Less
Submitted 16 November, 2015;
originally announced November 2015.
-
The IsoDAR High Intensity H$_2^+$ Transport and Injection Tests
Authors:
Jose Alonso,
Spencer Axani,
Luciano Calabretta,
Daniela Campo,
Luigi Celona,
Janet M. Conrad,
Alexandra Day,
Giuseppe Castro,
Francis Labrecque,
Daniel Winklehner
Abstract:
This technical report reviews the tests performed at the Best Cyclotron Systems, Inc. facility in regards to developing a cost effective ion source, beam line transport system, and acceleration system capable of high H$_2^+$ current output for the IsoDAR (Isotope Decay At Rest) experiment. We begin by outlining the requirements for the IsoDAR experiment then provide overview of the Versatile Ion S…
▽ More
This technical report reviews the tests performed at the Best Cyclotron Systems, Inc. facility in regards to developing a cost effective ion source, beam line transport system, and acceleration system capable of high H$_2^+$ current output for the IsoDAR (Isotope Decay At Rest) experiment. We begin by outlining the requirements for the IsoDAR experiment then provide overview of the Versatile Ion Source, Low Energy Beam Transport system, spiral inflector, and cyclotron. The experimental measurements are then discussed and the results are compared with a thorough set of simulation studies. Of particular importance we note that the Versatile Ion Source (VIS) proved to be a reliable ion source capable of generating a large amount of H$_2^+$ current. The results suggest that with further upgrades, the VIS could potentially be a suitable candidate for IsoDAR. The conclusion outlines the key results from our tests and introduces the forthcoming work this technical report has motivated.
△ Less
Submitted 16 August, 2015;
originally announced August 2015.
-
A Study on the Effect of Exit Widths and Crowd Sizes in the Formation of Arch in Clogged Crowds
Authors:
Francisco Enrique Vicente G. Castro,
Jaderick P. Pabico
Abstract:
The arching phenomenon is an emergent pattern formed by a $c$-sized crowd of intelligent, goal-oriented, autonomous, heterogeneous individuals moving towards a $w$-wide exit along a long $W$-wide corridor, where $W>w$. We collected empirical data from microsimulations to identify the combination effects of~$c$ and~$w$ to the time~$T$ of the onset of and the size~$S$ of the formation of the arch. T…
▽ More
The arching phenomenon is an emergent pattern formed by a $c$-sized crowd of intelligent, goal-oriented, autonomous, heterogeneous individuals moving towards a $w$-wide exit along a long $W$-wide corridor, where $W>w$. We collected empirical data from microsimulations to identify the combination effects of~$c$ and~$w$ to the time~$T$ of the onset of and the size~$S$ of the formation of the arch. The arch takes on the form of the perimeter of a half ellipse halved along the minor axis. We measured the~$S$ with respect to the lengths of the major~$M$ and minor~$m$ axes of the ellipse, respectively. The mathematical description of the formation of this phenomenon will be an important information in the design of walkways to control and easily direct the flow of large crowds, especially during panic egress conditions.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Microsimulations of Arching, Clogging, and Bursty Exit Phenomena in Crowd Dynamics
Authors:
Francisco Enrique Vicente G. Castro,
Jaderick P. Pabico
Abstract:
We present in this paper the behavior of an artificial agent who is a member of a crowd. The behavior is based on the social comparison theory, as well as the trajectory mapping towards an agent's goal considering the agent's field of vision. The crowd of artificial agents were able to exhibit arching, clogging, and bursty exit rates. We were also able to observe a new phenomenon we called double…
▽ More
We present in this paper the behavior of an artificial agent who is a member of a crowd. The behavior is based on the social comparison theory, as well as the trajectory mapping towards an agent's goal considering the agent's field of vision. The crowd of artificial agents were able to exhibit arching, clogging, and bursty exit rates. We were also able to observe a new phenomenon we called double arching, which happens towards the end of the simulation, and whose onset is exhibited by a "calm" density graph within the exit passage. The density graph is usually bursty at this area. Because of these exhibited phenomena, we can use these agents with high confidence to perform microsimulation studies for modeling the behavior of humans and objects in very realistic ways.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Simultaneous Surface Plasmon Resonance and X-ray Absorption Spectroscopy
Authors:
A. Serrano,
O. Rodríguez de la Fuente,
V. Collado,
J. Rubio-Zuazo,
C. Monton,
G. Castro,
M. A. García
Abstract:
We present here an experimental set-up to perform simultaneously measurements of surface plasmon resonance (SPR) and X-ray absorption spectroscopy (XAS) in a synchrotron beamline. The system allows measuring in situ and in real time the effect of X-ray irradiation on the SPR curves to explore the interaction of X-rays with matter. It is also possible to record XAS spectra while exciting SPR in ord…
▽ More
We present here an experimental set-up to perform simultaneously measurements of surface plasmon resonance (SPR) and X-ray absorption spectroscopy (XAS) in a synchrotron beamline. The system allows measuring in situ and in real time the effect of X-ray irradiation on the SPR curves to explore the interaction of X-rays with matter. It is also possible to record XAS spectra while exciting SPR in order to detect the changes in the electronic configuration of thin films induced by the excitation of surface plasmons. Combined experiments recording simultaneously SPR and XAS curves while scanning different parameters can be carried out. The relative variations in the SPR and XAS spectra that can be detected with this set-up ranges from 10-3 to 10-5, depending on the particular experiment.
△ Less
Submitted 6 June, 2012; v1 submitted 19 April, 2012;
originally announced April 2012.
-
Origin of the submillimeter radio emission during the time-extended phase of a solar flare
Authors:
G. Trottet,
J. -P. Raulin,
G. Giménez de Castro,
T. Lüthi,
A. Caspi,
C. H. Mandrini,
M. L. Luoni,
P. Kaufmann
Abstract:
Solar flares observed in the 200-400 GHz radio domain may exhibit a slowly varying and time-extended component which follows a short (few minutes) impulsive phase and which lasts for a few tens of minutes to more than one hour. The few examples discussed in the literature indicate that such long-lasting submillimeter emission is most likely thermal bremsstrahlung. We present a detailed analysis of…
▽ More
Solar flares observed in the 200-400 GHz radio domain may exhibit a slowly varying and time-extended component which follows a short (few minutes) impulsive phase and which lasts for a few tens of minutes to more than one hour. The few examples discussed in the literature indicate that such long-lasting submillimeter emission is most likely thermal bremsstrahlung. We present a detailed analysis of the time-extended phase of the 2003 October 27 (M6.7) flare, combining 1-345 GHz total-flux radio measurements with X-ray, EUV, and Hα observations. We find that the time-extended radio emission is, as expected, radiated by thermal bremsstrahlung. Up to 230 GHz, it is entirely produced in the corona by hot and cool materials at 7-16 MK and 1-3 MK, respectively. At 345 GHz, there is an additional contribution from chromospheric material at a few 10^4 K. These results, which may also apply to other millimeter-submillimeter radio events, are not consistent with the expectations from standard semi-empirical models of the chromosphere and transition region during flares, which predict observable radio emission from the chromosphere at all frequencies where the corona is transparent.
△ Less
Submitted 26 September, 2011;
originally announced September 2011.
-
Calibration of the Transport Parameters of a Local Problem of Water Quality in Igapó I Lake
Authors:
Neyva M. L. Romeiro,
Rigoberto G. S. Castro,
Eliandro R. Cirilo,
Paulo L. Natti
Abstract:
The calibration of a model refers to the process by which one can estimate some parameters by comparisons with observed data. Due to the dynamical nature of the environment, variations between predicted and observed values occur. Thus, the environmental parameters may vary due to random temperature changes, time of discharge flow, time of the day, and other conditions. Such variations can be minim…
▽ More
The calibration of a model refers to the process by which one can estimate some parameters by comparisons with observed data. Due to the dynamical nature of the environment, variations between predicted and observed values occur. Thus, the environmental parameters may vary due to random temperature changes, time of discharge flow, time of the day, and other conditions. Such variations can be minimized by identifying and optimizing some parameters of the transport model, like the values of diffusion coefficients in x and y directions and the kinetic parameter that describes the process of removing pollutants. This paper presents results concerning the calibration of transport parameters for two-dimensional problems of water quality (fecal coliform control) at Igapó I Lake, located in Londrina, Paraná, Brazil. Thus, the convection-diffusion-reaction equation, which describes mathematically the process studied in this work, is resolved by a semidiscrete finite element method (SUPG) which combines finite differences in time and finite elements in space.
△ Less
Submitted 13 January, 2011;
originally announced January 2011.
