-
A feasibility study of a thorium fueled molten salt micro modular subcritical reactor using an electron accelerator
Authors:
A. Rummana,
R. Barlow,
G. Myneni,
S. M. Saad
Abstract:
We present a design for a small subcritical molten salt thorium breeder reactor driven by an electron accelerator. Such a reactor could provide a safe and simple power source fuelled by thorium, without generating long-lived minor actinides. We use both Geant4 and MCNPX simulations to study the production of photons and photoneutrons, the criticality and the breeding in a simple conceptual design.…
▽ More
We present a design for a small subcritical molten salt thorium breeder reactor driven by an electron accelerator. Such a reactor could provide a safe and simple power source fuelled by thorium, without generating long-lived minor actinides. We use both Geant4 and MCNPX simulations to study the production of photons and photoneutrons, the criticality and the breeding in a simple conceptual design. We show that the concept is on the edge of viability.
△ Less
Submitted 25 March, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
IsoDAR@Yemilab: A Report on the Technology, Capabilities, and Deployment
Authors:
Jose R. Alonso,
Daniel Winklehner,
Joshua Spitz,
Janet M. Conrad,
Seon-Hee Seo,
Yeongduk Kim,
Michael Shaevitz,
Adriana Bungau,
Roger Barlow,
Luciano Calabretta,
Andreas Adelmann,
Daniel Mishins,
Larry Bartoszek,
Loyd H. Waites,
Ki-Mun Bang,
Kang-Soon Park,
Erik A. Voirin
Abstract:
IsoDAR@Yemilab is a novel isotope-decay-at-rest experiment that has preliminary approval to run at the Yemi underground laboratory (Yemilab) in Jeongseon-gun, South Korea. In this technical report, we describe in detail the considerations for installing this compact particle accelerator and neutrino target system at the Yemilab underground facility. Specifically, we describe the caverns being prep…
▽ More
IsoDAR@Yemilab is a novel isotope-decay-at-rest experiment that has preliminary approval to run at the Yemi underground laboratory (Yemilab) in Jeongseon-gun, South Korea. In this technical report, we describe in detail the considerations for installing this compact particle accelerator and neutrino target system at the Yemilab underground facility. Specifically, we describe the caverns being prepared for IsoDAR, and address installation, hielding, and utilities requirements. To give context and for completeness, we also briefly describe the physics opportunities of the IsoDAR neutrino source when paired with the Liquid Scintillator Counter (LSC) at Yemilab, and review the technical design of the neutrino source.
△ Less
Submitted 11 July, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Calculations of neutron fluxes and isotope conversion rates in a thorium-fuelled MYRRHA reactor, using GEANT4 and MCNPX, Nuclear Engineering and Design
Authors:
Asiya Rummana,
Roger John Barlow,
Syed Mohammad Saad
Abstract:
Neutronics calculations have been performed of the MYRRHA ADS Reactor with a thorium-based fuel mixture, using the simulation programs MCNPX (Waters, 2002) and Geant4 (Agostinelli, 2003). Thorium is often considered for ADS systems, and this is the first evaluation of the possibilities for thorium based fuels using a reactor design which has been developed in detail. It also extends the applicatio…
▽ More
Neutronics calculations have been performed of the MYRRHA ADS Reactor with a thorium-based fuel mixture, using the simulation programs MCNPX (Waters, 2002) and Geant4 (Agostinelli, 2003). Thorium is often considered for ADS systems, and this is the first evaluation of the possibilities for thorium based fuels using a reactor design which has been developed in detail. It also extends the application of the widely-used Geant4 program to the geometry of MYRRHA and to thorium. An asymptotic 232Th/233U mixture is considered, together with the standard MOX fuel and a possible 232Th/MOX starter. Neutron fluxes and spectra are calculated at several regions in the core: fuel cells, IPS cells and the two (Mo and Ac) isotope production cells. These are then used for simple calculations of the fuel evolution and of the potential for the incineration of minor actinide waste. Results from the two programs agree and support each other and show that the thorium fuel is viable, and has good evolution/breeding properties, and that minor actinide incineration, though it will not take place on a significant scale, will be demonstrable.
△ Less
Submitted 20 January, 2022;
originally announced January 2022.
-
IsoDAR@Yemilab: A Conceptual Design Report for the Deployment of the Isotope Decay-At-Rest Experiment in Korea's New Underground Laboratory, Yemilab
Authors:
J. R. Alonso,
K. M. Bang,
R. Barlow,
L. Bartoszek,
A. Bungau,
L. Calabretta,
J. M. Conrad,
S. Kayser,
Y. D. Kim,
K. S. Park,
S. H. Seo,
M. H. Shaevitz,
J. Spitz,
L. H. Waites,
D. Winklehner
Abstract:
This Conceptual Design Report addresses the site-specific issues associated with the deployment of the IsoDAR experiment at the Yemilab site. IsoDAR@Yemilab pairs the IsoDAR cyclotron-driven $\barν_e$ source with the proposed Liquid Scintillator Counter (LSC) 2.5 kton detector. This document describes the proposed siting: requirements for the caverns to house the cyclotron, beam transport line, an…
▽ More
This Conceptual Design Report addresses the site-specific issues associated with the deployment of the IsoDAR experiment at the Yemilab site. IsoDAR@Yemilab pairs the IsoDAR cyclotron-driven $\barν_e$ source with the proposed Liquid Scintillator Counter (LSC) 2.5 kton detector. This document describes the proposed siting: requirements for the caverns to house the cyclotron, beam transport line, and target systems; issues associated with transport and assembly of components on the site; electrical power, cooling and ventilation; as well as issues associated with radiation protection of the environment and staff of Yemilab who will be interfacing with IsoDAR during its operational phases. The onset of construction of the IsoDAR area at Yemilab, in tandem with the release of this design report, represents a key step forward in establishing IsoDAR@Yemilab.
△ Less
Submitted 28 December, 2021; v1 submitted 20 October, 2021;
originally announced October 2021.
-
Merlin++, a flexible and feature-rich accelerator physics and particle tracking library
Authors:
Robert Appleby,
Roger Barlow,
Dirk Kruecker,
James Molson,
Haroon Rafique,
Scott Rowan,
Sam Tygier,
Nicholas Walker,
Andrzej Wolski
Abstract:
Merlin++ is a C++ charged-particle tracking library developed for the simulation and analysis of complex beam dynamics within high energy particle accelerators. Accurate simulation and analysis of particle dynamics is an essential part of the design of new particle accelerators, and for the optimization of existing ones. Merlin++ is a feature-full library with focus on long-term tracking studies.…
▽ More
Merlin++ is a C++ charged-particle tracking library developed for the simulation and analysis of complex beam dynamics within high energy particle accelerators. Accurate simulation and analysis of particle dynamics is an essential part of the design of new particle accelerators, and for the optimization of existing ones. Merlin++ is a feature-full library with focus on long-term tracking studies. A user may simulate distributions of protons or electrons in either single particle or sliced macro-particle bunches. The tracking code includes both straight and curvilinear coordinate systems allowing for the simulation of either linear or circular accelerator lattice designs, and uses a fast and accurate explicit symplectic integrator. Physics processes for common design studies have been implemented, including RF cavity acceleration, synchrotron radiation damping, on-line physical aperture checks and collimation, proton scattering, wakefield simulation, and spin-tracking. Merlin++ was written using C++ object orientated design practices and has been optimized for speed using multicore processors. This article presents an account of the program, including its functionality and guidance for use.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
Medical Isotope Production with the IsoDAR Cyclotron
Authors:
Jose R. Alonso,
Roger Barlow,
Janet M. Conrad,
Loyd Hoyt Waites
Abstract:
Authors describe technical advances that will allow the IsoDAR cyclotron -- being developed for neutrino physics research -- to produce medical isotopes more efficiently than existing cyclotrons can.
Authors describe technical advances that will allow the IsoDAR cyclotron -- being developed for neutrino physics research -- to produce medical isotopes more efficiently than existing cyclotrons can.
△ Less
Submitted 19 March, 2020; v1 submitted 17 March, 2020;
originally announced March 2020.
-
Practical Statistics for Particle Physics
Authors:
Roger John Barlow
Abstract:
This is the write-up of a set of lectures given at the Asia Europe Pacific School of High Energy Physics in Quy Nhon, Vietnam in September 2018, to an audience of PhD students in all branches of particle physics They cover the different meanings of 'probability', particularly frequentist and Bayesian, the binomial, Poisson and Gaussian distributions, hypothesis testing, estimation, errors (includi…
▽ More
This is the write-up of a set of lectures given at the Asia Europe Pacific School of High Energy Physics in Quy Nhon, Vietnam in September 2018, to an audience of PhD students in all branches of particle physics They cover the different meanings of 'probability', particularly frequentist and Bayesian, the binomial, Poisson and Gaussian distributions, hypothesis testing, estimation, errors (including asymmetric and systematic errors) and goodness of fit. Several different methods used in setting upper limits are explained, followed by a discussion on why 5 sigma are conventionally required for a 'discovery'.
△ Less
Submitted 2 February, 2021; v1 submitted 29 May, 2019;
originally announced May 2019.
-
What is the Potential Impact of the IsoDAR Cyclotron on Radioisotope Production: A Review
Authors:
Loyd Hoyt Waites,
Jose R Alonso,
Roger Barlow,
Janet Conrad
Abstract:
The IsoDAR collaboration is developing a high-current cyclotron for a neutrino search experiment. Designed to deliver 10 mA of 60 MeV protons, the current and power of this cyclotron far exceed those of existing accelerators, opening new possibilities for the production of radiopharmaceutical isotopes, producing very high-activity samples in very short times. The cyclotron can also be easily confi…
▽ More
The IsoDAR collaboration is developing a high-current cyclotron for a neutrino search experiment. Designed to deliver 10 mA of 60 MeV protons, the current and power of this cyclotron far exceed those of existing accelerators, opening new possibilities for the production of radiopharmaceutical isotopes, producing very high-activity samples in very short times. The cyclotron can also be easily configured to deliver ions other than protons including 1 mA of alpha particles at 240 MeV: this flexibility gives a broad reach into new areas of isotope production. We explain how IsoDAR overcomes the beam limits of commercial cyclotrons, and how it could represent the next step in isotope production rates.
△ Less
Submitted 19 March, 2020; v1 submitted 17 July, 2018;
originally announced July 2018.
-
Status of MERLIN
Authors:
Haroon Rafique,
Robert B Appleby,
Roger J Barlow,
James G Molson,
Sam Tygier,
Alessandra Valloni
Abstract:
MERLIN is an accelerator physics library written in C++ which can be used for a range of accelerator tracking simulations, including collimation in hadron colliders. Recently MERLIN has been upgraded to provide a robust tool for HL-LHC collimation, including the treatment of composite materials, and a hollow electron lens process. We describe the features of MERLIN used in collimation simulations.
MERLIN is an accelerator physics library written in C++ which can be used for a range of accelerator tracking simulations, including collimation in hadron colliders. Recently MERLIN has been upgraded to provide a robust tool for HL-LHC collimation, including the treatment of composite materials, and a hollow electron lens process. We describe the features of MERLIN used in collimation simulations.
△ Less
Submitted 20 March, 2019; v1 submitted 19 December, 2017;
originally announced December 2017.
-
Intensity limits of the PSI Injector II cyclotron
Authors:
Anna Kolano,
Andreas Adelmann,
Roger Barlow,
Christian Baumgarten
Abstract:
We investigate limits on the current of the PSI Injector II high intensity separate-sector isochronous cyclotron, in its present configuration and after a proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino experiments, and medical isotope production all benefit from increases in current, even at the ~ 10% level: the PSI cyclotrons provide relevant experience. As space…
▽ More
We investigate limits on the current of the PSI Injector II high intensity separate-sector isochronous cyclotron, in its present configuration and after a proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino experiments, and medical isotope production all benefit from increases in current, even at the ~ 10% level: the PSI cyclotrons provide relevant experience. As space charge dominates at low beam energy, the injector is critical. Understanding space charge effects and halo formation through detailed numerical modelling gives clues on how to maximise the extracted current. Simulation of a space-charge dominated low energy high intensity (9.5 mA DC) machine, with a complex collimator set up in the central region shaping the bunch, is not trivial. We use the OPAL code, a tool for charged-particle optics calculations in large accelerator structures and beam lines, including 3D space charge. We have a precise model of the present production) Injector II, operating at 2.2 mA current. A simple model of the proposed future (upgraded) configuration of the cyclotron is also investigated.
We estimate intensity limits based on the developed models, supported by fitted scaling laws and measurements. We have been able to perform more detailed analysis of the bunch parameters and halo development than any previous study. Optimisation techniques enable better matching of the simulation set-up with Injector II parameters and measurements. We show that in the production configuration the beam current scales to the power of three with the beam size. However, at higher intensities, 4th power scaling is a better fit, setting the limit of approximately 3 mA. Currents of over 5 mA, higher than have been achieved to date, can be produced if the collimation scheme is adjusted.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
Collimation System
Authors:
R. B. Appleby,
R. Barlow,
A. Bertarelli,
R. Bruce,
F. Carra,
F. Cerutti,
L. Esposito,
A. Faus-Golfe,
H. Garcia Morales,
L. Gentini,
S. M. Gibson,
P. Gradassi,
J. M. Jowett,
R. Kwee-Hinzmann,
L. Lari,
A. Lechner,
T. Markiewicz,
A. Marsili,
J. Molson,
L. J. Nevay,
E. Quaranta,
H. Rafique,
S. Redaelli,
M. Serluca,
E. Skordis
, et al. (3 additional authors not shown)
Abstract:
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Combining Experiments with Systematic Errors
Authors:
Roger John Barlow
Abstract:
We consider fits to two or more datasets for which results from the sa me experiment share a common systematic uncertainty in addition to their individ ual statistical errors. This is important in extracting the maximum information from a set of similar bu t different experiments (or the same experiment under different conditions) an alysing similar but different datasets, as happens at the LHC an…
▽ More
We consider fits to two or more datasets for which results from the sa me experiment share a common systematic uncertainty in addition to their individ ual statistical errors. This is important in extracting the maximum information from a set of similar bu t different experiments (or the same experiment under different conditions) an alysing similar but different datasets, as happens at the LHC and other particle colliders. There are two techniques in use: using the full matrix and using extra paramneters, and we show, for a completely general fit, that for an addit ive uncertainty they are in principle equivalent even though in practice the det ails differ. For a multiplicative error the matrix fit is equivalent to the extra parameter fit if the factor is applied to the data points but not if it is applied to the function: the former leads to biassed estimates and the latter avoids them.
△ Less
Submitted 27 September, 2020; v1 submitted 11 January, 2017;
originally announced January 2017.
-
The Practical Pomeron for High Energy Proton Collimation
Authors:
R. B. Appleby,
R. J. Barlow,
J. G Molson,
M. Serluca,
A. Toader
Abstract:
We present a model which describes proton scattering data from ISR to Tevatron energies, and which can be applied to collimation n high energy accelerators, such as the LHC and FCC. Collimators remove beam halo particles, so that they do not impinge on vulnerable regions of the machine, such as the superconducting magnets and the experimental areas. In simulating the effect of the collimator jaws…
▽ More
We present a model which describes proton scattering data from ISR to Tevatron energies, and which can be applied to collimation n high energy accelerators, such as the LHC and FCC. Collimators remove beam halo particles, so that they do not impinge on vulnerable regions of the machine, such as the superconducting magnets and the experimental areas. In simulating the effect of the collimator jaws it is crucial to model the scattering of protons at small momentum transfer~$t$,as these protons can subsequently survive several turns of the ring before being lost. At high energies these soft processes are well described by Pomeron exchange models. We study the behaviour of elastic and single-diffractive dissociation cross sections over a wide range of energy, and show that the model can be used as a global description of the wide variety of high energy elastic and diffractive data presently available. In particular it models low mass diffraction dissociation, where a rich resonance structure is present, and thus predicts the differential and integrated cross sections in the kinematical range appropriate to the LHC.We incorporate the physics of this model into the beam tracking code MERLIN and use it to simulate the resulting loss maps of the beam halo lost in the collimators in the LHC.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
IsoDAR@KamLAND: A Conceptual Design Report for the Technical Facility
Authors:
M. Abs,
A. Adelmann,
J. R Alonso,
S. Axani,
W. A. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
L. Calabretta,
A. Calanna,
D. Campo,
G. Castro,
L. Celona,
G. H. Collin,
J. M. Conrad,
S. Gammino,
R. Johnson,
G. Karagiorgi,
S. Kayser,
W. Kleeven,
A. Kolano,
F. Labrecque,
W. A. Loinaz,
J. Minervini,
M. H. Moulai
, et al. (15 additional authors not shown)
Abstract:
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation…
▽ More
This conceptual design report describes the technical facility for the IsoDAR electron-antineutrino source at KamLAND. The IsoDAR source will allow an impressive program of neutrino oscillation and electroweak physics to be performed at KamLAND. This report provides information on the physics case, the conceptual design for the subsystems, alternative designs considered, specifics of installation at KamLAND, and identified needs for future development. We discuss the risks we have identified and our approach to mitigating those risks with this design. A substantial portion of the conceptual design is based on three years of experimental efforts and on industry experience. This report also includes information on the conventional facilities.
△ Less
Submitted 16 November, 2015;
originally announced November 2015.
-
The potential for a high power FFAG proton driver for ADS
Authors:
S. L. Sheehy,
C. Johnstone,
R. Barlow,
A. Adelmann
Abstract:
Fixed-field alternating gradient accelerators are promising candidates for next-generation 10 MW-class high power proton drivers. Recent advances in lattice design of non-scaling FFAGs have progressed toward both isochronicity and chromatic correction. The resulting 1 GeV non-scaling FFAG design may be able to support a continuous (CW) beam with far lower peak current than the pulsed alternative.…
▽ More
Fixed-field alternating gradient accelerators are promising candidates for next-generation 10 MW-class high power proton drivers. Recent advances in lattice design of non-scaling FFAGs have progressed toward both isochronicity and chromatic correction. The resulting 1 GeV non-scaling FFAG design may be able to support a continuous (CW) beam with far lower peak current than the pulsed alternative. A 6-cell non-scaling FFAG design is described and recent work in modeling 3D space charge using the OPAL framework is presented, including fixed energy studies and beam dynamics with fast acceleration in the so-called serpentine channel.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.
-
Accelerator system for the PRISM based muon to electron conversion experiment
Authors:
A. Alekou,
R. Appleby,
M. Aslaninejad,
R. J. Barlow,
R. Chudzinski K. M. Hock,
J. Garland,
L. J. Jenner,
D. J. Kelliher,
Y. Kuno,
A. Kurup,
J-B. Lagrange,
M. Lancaster,
S. Machida,
Y. Mori,
B. Muratori,
C. Ohmori,
H. Owen,
J. Pasternak,
T. Planche,
C. Prior,
A. Sato,
Y. Shi,
S. Smith,
Y. Uchida,
H. Witte
, et al. (1 additional authors not shown)
Abstract:
The next generation of lepton flavor violation experiments need high intensity and high quality muon beams. Production of such beams requires sending a short, high intensity proton pulse to the pion production target, capturing pions and collecting the resulting muons in the large acceptance transport system. The substantial increase of beam quality can be obtained by applying the RF phase rotatio…
▽ More
The next generation of lepton flavor violation experiments need high intensity and high quality muon beams. Production of such beams requires sending a short, high intensity proton pulse to the pion production target, capturing pions and collecting the resulting muons in the large acceptance transport system. The substantial increase of beam quality can be obtained by applying the RF phase rotation on the muon beam in the dedicated FFAG ring, which was proposed for the PRISM project.This allows to reduce the momentum spread of the beam and to purify from the unwanted components like pions or secondary protons. A PRISM Task Force is addressing the accelerator and detector issues that need to be solved in order to realize the PRISM experiment. The parameters of the required proton beam, the principles of the PRISM experiment and the baseline FFAG design are introduced. The spectrum of alternative designs for the PRISM FFAG ring are shown. Progress on ring main systems like injection and RF are presented. The current status of the study and its future directions are discussed.
△ Less
Submitted 2 October, 2013;
originally announced October 2013.
-
Whitepaper on the DAEdALUS Program
Authors:
C. Aberle,
A. Adelmann,
J. Alonso,
W. A. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
A. Calanna,
D. Campo,
L. Calabretta,
L. Celona,
G. Collin,
J. M. Conrad,
A. de Gouvea,
Z. Djurcic,
S. Gammino,
D. Garisto,
R. Gutierrez,
R. R. Johnson,
Y. Kamyshkov,
G. Karagiorgi,
A. Kolano,
F. Labrecque,
W. Loinaz,
H. Okuno
, et al. (12 additional authors not shown)
Abstract:
This whitepaper describes the status of the DAEdALUS program for development of high power cyclotrons as of the time of the final meeting of the Division of Particles and Fields 2013 Community Study ("Snowmass"). We report several new results, including a measurement capability between 4 and 12 degrees on the CP violating parameter in the neutrino sector. Past results, including the capability of…
▽ More
This whitepaper describes the status of the DAEdALUS program for development of high power cyclotrons as of the time of the final meeting of the Division of Particles and Fields 2013 Community Study ("Snowmass"). We report several new results, including a measurement capability between 4 and 12 degrees on the CP violating parameter in the neutrino sector. Past results, including the capability of the IsoDAR high Dm^2 antielectron neutrino disappearance search, are reviewed. A discussion of the R&D successes, including construction of a beamline teststand, and future plans are provided. This text incorporates short whitepapers written for subgroups in the Intensity Frontier and Frontier Capabilities Working Groups that are available on the Snowmass website.
△ Less
Submitted 10 July, 2013;
originally announced July 2013.
-
Cost-effective Design Options for IsoDAR
Authors:
A. Adelmann,
J. R. Alonso,
W. Barletta,
R. Barlow,
L. Bartoszek,
A. Bungau,
L. Calabretta,
A. Calanna,
D. Campo,
J. M. Conrad,
Z. Djurcic,
Y. Kamyshkov,
H. Owen,
M. H. Shaevitz,
I. Shimizu,
T. Smidt,
J. Spitz,
M. Toups,
M. Wascko,
L. A. Winslow,
J. J. Yang
Abstract:
This whitepaper reviews design options for the IsoDAR electron antineutrino source. IsoDAR is designed to produce $2.6 \times 10^{22}$ electron antineutrinos per year with an average energy of 6.4 MeV, using isotope decay-at-rest. Aspects which must be balanced for cost-effectiveness include: overall cost; rate and energy distribution of the electron antineutrino flux and backgrounds; low technica…
▽ More
This whitepaper reviews design options for the IsoDAR electron antineutrino source. IsoDAR is designed to produce $2.6 \times 10^{22}$ electron antineutrinos per year with an average energy of 6.4 MeV, using isotope decay-at-rest. Aspects which must be balanced for cost-effectiveness include: overall cost; rate and energy distribution of the electron antineutrino flux and backgrounds; low technical risk; compactness; simplicity of underground construction and operation; reliability; value to future neutrino physics programs; and value to industry. We show that the baseline design outlined here is the most cost effective.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Multimegawatt DAE$δ$ALUS Cyclotrons for Neutrino Physics
Authors:
M. Abs,
A. Adelmann,
J. R. Alonso,
W. A. Barletta,
R. Barlow,
L. Calabretta,
A. Calanna,
D. Campo,
L. Celona,
J. M. Conrad,
S. Gammino,
W. Kleeven,
T. Koeth,
M. Maggiore,
H. Okuno,
L. A. C. Piazza,
M. Seidel,
M. H. Shaevitz,
L. Stingelin,
J. J. Yang,
J. Yeck
Abstract:
DAE$δ$ALUS (Decay-At-rest Experiment for $δ_{CP}$ studies At the Laboratory for Underground Science) provides a new approach to the search for CP violation in the neutrino sector. High-power continuous-wave proton cyclotrons efficiently provide the necessary proton beams with an energy of up to 800 MeV to create neutrinos from pion and muon decay-at-rest. The experiment searches for…
▽ More
DAE$δ$ALUS (Decay-At-rest Experiment for $δ_{CP}$ studies At the Laboratory for Underground Science) provides a new approach to the search for CP violation in the neutrino sector. High-power continuous-wave proton cyclotrons efficiently provide the necessary proton beams with an energy of up to 800 MeV to create neutrinos from pion and muon decay-at-rest. The experiment searches for $\barν_μ \rightarrow \barν_e$ at short baselines corresponding to the atmospheric $Δm^2$ region. The $\barν_e$ will be detected via inverse beta decay. Thus, the cyclotrons will be employed at a future ultra-large gadolinium-doped water or scintillator detector. In this paper we address the most challenging questions regarding a cyclotron-based high-power proton driver in the megawatt range with a kinetic energy of 800 MeV. Aspects of important subsystems like the ion source and injection chain, the magnet design and radio frequency system will be addressed. Precise beam dynamics simulations, including space charge and the $\text{H}_2^+$ stripping process, are the base for the characterization and quantification of the beam halo -- one of the most limiting processes in high-power particle accelerators.
△ Less
Submitted 1 August, 2012; v1 submitted 20 July, 2012;
originally announced July 2012.
-
Target Studies for the Production of Lithium8 for Neutrino Physics Using a Low Energy Cyclotron
Authors:
Adriana Bungau,
Roger Barlow,
Michael Shaevitz,
Janet Conrad,
Joshua Spitz
Abstract:
Lithium 8 is a short lived beta emitter producing a high energy anti-neutrino, which is very suitable for making several measurements of fundamental quantities. It is proposed to produce Lithium 8 with a commercially available 60 MeV cyclotron using protons or alpha particles on a Beryllium 9 target. We have used the GEANT4 program to model these processes, and calculate the anti-neutrino fluxes t…
▽ More
Lithium 8 is a short lived beta emitter producing a high energy anti-neutrino, which is very suitable for making several measurements of fundamental quantities. It is proposed to produce Lithium 8 with a commercially available 60 MeV cyclotron using protons or alpha particles on a Beryllium 9 target. We have used the GEANT4 program to model these processes, and calculate the anti-neutrino fluxes that could be obtained in a practical system. We also calculate the production of undesirable contaminants such as Boron 8, and show that these can be reduced to a very low level.
△ Less
Submitted 25 May, 2012;
originally announced May 2012.
-
Simulations of Pion Production in the DAEδALUS Target
Authors:
Adriana Bungau,
Roger Barlow,
Mike Shaevitz,
Janet Conrad,
Joshua Spitz,
Tess Smidt
Abstract:
DAEδALUS, the Decay At-rest Experiment for δ_{CP} at a Laboratory for Underground Science will look for evidence of CP-violation in the neutrino sector, an ingredient in theories that seek to explain the matter/antimatter asymmetry in our universe. It will make a precision measurement of the oscillations of muon antineutrinos to electron antineutrinos using multiple neutrino sources created by low…
▽ More
DAEδALUS, the Decay At-rest Experiment for δ_{CP} at a Laboratory for Underground Science will look for evidence of CP-violation in the neutrino sector, an ingredient in theories that seek to explain the matter/antimatter asymmetry in our universe. It will make a precision measurement of the oscillations of muon antineutrinos to electron antineutrinos using multiple neutrino sources created by low-cost compact cyclotrons. The experiment utilizes decay-at-rest neutrino beams produced by 800 MeV protons impinging a beam target of graphite and copper. Two well established Monte Carlo codes, MARS and GEANT4, have been used to optimise the design and the performance of the target. A study of the results obtained with these two codes is presented in this paper.
△ Less
Submitted 25 March, 2013; v1 submitted 24 May, 2012;
originally announced May 2012.
-
Absolute luminosity measurements with the LHCb detector at the LHC
Authors:
The LHCb Collaboration,
R. Aaij,
B. Adeva,
M. Adinolfi,
C. Adrover,
A. Affolder,
Z. Ajaltouni,
J. Albrecht,
F. Alessio,
M. Alexander,
G. Alkhazov,
P. Alvarez Cartelle,
A. A. Alves Jr,
S. Amato,
Y. Amhis,
J. Anderson,
R. B. Appleby,
O. Aquines Gutierrez,
F. Archilli,
L. Arrabito,
A. Artamonov,
M. Artuso,
E. Aslanides,
G. Auriemma,
S. Bachmann
, et al. (549 additional authors not shown)
Abstract:
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot…
▽ More
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented.
△ Less
Submitted 11 January, 2012; v1 submitted 13 October, 2011;
originally announced October 2011.
-
Expression of Interest for a Novel Search for CP Violation in the Neutrino Sector: DAEdALUS
Authors:
J. Alonso,
F. T. Avignone,
W. A. Barletta,
R. Barlow,
H. T. Baumgartner,
A. Bernstein,
E. Blucher,
L. Bugel,
L. Calabretta,
L. Camilleri,
R. Carr,
J. M. Conrad,
S. A. Dazeley,
Z. Djurcic,
A. de Gouvea,
P. H. Fisher,
C. M. Ignarra,
B. J. P. Jones,
C. L. Jones,
G. Karagiorgi,
T. Katori,
S. E. Kopp,
R. C. Lanza,
W. A. Loinaz,
P. McIntyre
, et al. (20 additional authors not shown)
Abstract:
DAEdALUS, a Decay-At-rest Experiment for delta_CP studies At the Laboratory for Underground Science, provides a new approach to the search for CP violation in the neutrino sector. The design utilizes low-cost, high-power proton accelerators under development for commercial uses. These provide neutrino beams with energy up to 52 MeV from pion and muon decay-at-rest. The experiment searches for anin…
▽ More
DAEdALUS, a Decay-At-rest Experiment for delta_CP studies At the Laboratory for Underground Science, provides a new approach to the search for CP violation in the neutrino sector. The design utilizes low-cost, high-power proton accelerators under development for commercial uses. These provide neutrino beams with energy up to 52 MeV from pion and muon decay-at-rest. The experiment searches for aninu_mu to antinu_e at short baselines corresponding to the atmospheric Delta m^2 region. The antinu_e will be detected, via inverse beta decay, in the 300 kton fiducial-volume Gd-doped water Cherenkov neutrino detector proposed for the Deep Underground Science and Engineering Laboratory (DUSEL). DAEdALUS opens new opportunities for DUSEL. It provides a high-statistics, low-background alternative for CP violation searches which matches the capability of the conventional long-baseline neutrino experiment, LBNE. Because of the complementary designs, when DAEdALUS antineutrino data are combined with LBNE neutrino data, the sensitivity of the CP-violation search improves beyond any present proposals, including the proposal for Project X. Also, the availability of an on-site neutrino beam opens opportunities for additional physics, both for the presently planned DUSEL detectors and for new experiments at a future 300 ft campus.
△ Less
Submitted 1 June, 2010;
originally announced June 2010.
-
Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype
Authors:
C. Adloff,
Y. Karyotakis,
J. Repond,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson,
J. A. Wilson,
T. Goto,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
J. Apostolakis,
A. Ribon,
V. Uzhinskiy,
M. Benyamna,
C. Cârloganu,
F. Fehr,
P. Gay,
G. C. Blazey,
D. Chakraborty
, et al. (133 additional authors not shown)
Abstract:
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the…
▽ More
A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to 80 GeV. The analysis described here focuses on the interactions of pions in the calorimeter. One of the main objectives of the CALICE program is to validate the Monte Carlo tools available for the design of a full-sized detector. The interactions of pions in the Si-W calorimeter are therefore confronted with the predictions of various physical models implemented in the GEANT4 simulation framework.
△ Less
Submitted 28 April, 2010;
originally announced April 2010.
-
Construction and Commissioning of the CALICE Analog Hadron Calorimeter Prototype
Authors:
C. Adloff,
Y. Karyotakis,
J. Repond,
A. Brandt,
H. Brown,
K. De,
C. Medina,
J. Smith,
J. Li,
M. Sosebee,
A. White,
J. Yu,
T. Buanes,
G. Eigen,
Y. Mikami,
O. Miller,
N. K. Watson,
J. A. Wilson,
T. Goto,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
D. Benchekroun,
A. Hoummada
, et al. (205 additional authors not shown)
Abstract:
An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC.…
▽ More
An analog hadron calorimeter (AHCAL) prototype of 5.3 nuclear interaction lengths thickness has been constructed by members of the CALICE Collaboration. The AHCAL prototype consists of a 38-layer sandwich structure of steel plates and highly-segmented scintillator tiles that are read out by wavelength-shifting fibers coupled to SiPMs. The signal is amplified and shaped with a custom-designed ASIC. A calibration/monitoring system based on LED light was developed to monitor the SiPM gain and to measure the full SiPM response curve in order to correct for non-linearity. Ultimately, the physics goals are the study of hadron shower shapes and testing the concept of particle flow. The technical goal consists of measuring the performance and reliability of 7608 SiPMs. The AHCAL was commissioned in test beams at DESY and CERN. The entire prototype was completed in 2007 and recorded hadron showers, electron showers and muons at different energies and incident angles in test beams at CERN and Fermilab.
△ Less
Submitted 12 March, 2010;
originally announced March 2010.
-
Computation of Resistive Wakefields
Authors:
Adina M Toader,
Roger J Barlow
Abstract:
We evaluate longitudinal resistive wakefields for cylindrical beam pipes numerically and compare the results with existing approximate formulæ. We consider an ultra-relativistic bunch traversing a cylindrical, metallic tube for a model in which the wall conductivity is taken to be first independent and second dependent on frequency, and we show how these can be included simply and efficiently in…
▽ More
We evaluate longitudinal resistive wakefields for cylindrical beam pipes numerically and compare the results with existing approximate formulæ. We consider an ultra-relativistic bunch traversing a cylindrical, metallic tube for a model in which the wall conductivity is taken to be first independent and second dependent on frequency, and we show how these can be included simply and efficiently in particle tracking simulations. We also extend this to higher order modes, and to the transverse wakes. This full treatment can be necessary in the design of modern nano-beam accelerators.
△ Less
Submitted 7 January, 2009;
originally announced January 2009.
-
Design and Electronics Commissioning of the Physics Prototype of a Si-W Electromagnetic Calorimeter for the International Linear Collider
Authors:
CALICE Collaboration,
J. Repond,
J. Yu,
C. M. Hawkes,
Y. Mikami,
O. Miller,
N. K. Watson,
J. A. Wilson,
G. Mavromanolakis,
M. A. Thomson,
D. R. Ward,
W. Yan,
F. Badaud,
D. Boumediene,
C. Carloganu,
R. Cornat,
P. Gay,
Ph. Gris,
S. Manen,
F. Morisseau,
L. Royer,
G. C. Blazey,
D. Chakraborty,
A. Dyshkant,
K. Francis
, et al. (92 additional authors not shown)
Abstract:
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting…
▽ More
The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The absorber thickness totals 24 radiation lengths. It has been exposed in 2006 and 2007 to electron and hadron beams at the DESY and CERN beam test facilities, using a wide range of beam energies and incidence angles. In this paper, the prototype and the data acquisition chain are described and a summary of the data taken in the 2006 beam tests is presented. The methods used to subtract the pedestals and calibrate the detector are detailed. The signal-over-noise ratio has been measured at 7.63 +/- 0.01. Some electronics features have been observed; these lead to coherent noise and crosstalk between pads, and also crosstalk between sensitive and passive areas. The performance achieved in terms of uniformity and stability is presented.
△ Less
Submitted 5 August, 2008; v1 submitted 29 May, 2008;
originally announced May 2008.
-
A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components
Authors:
M. Woods,
R. Erickson,
J. Frisch,
C. Hast,
R. K. Jobe,
L. Keller,
T. Markiewicz,
T. Maruyama,
D. McCormick,
J. Nelson,
T. Nelson,
N. Phinney,
T. Raubenheimer,
M. Ross,
A. Seryi,
S. Smith,
Z. Szalata,
P. Tenenbaum,
M. Woodley,
D. Angal-Kalinin,
C. Beard,
C. Densham,
J. Greenhalgh,
F. Jackson,
A. Kalinin
, et al. (36 additional authors not shown)
Abstract:
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe…
▽ More
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.
△ Less
Submitted 24 May, 2005;
originally announced May 2005.
-
Asymmetric Statistical Errors
Authors:
Roger Barlow
Abstract:
Asymmetric statistical errors arise for experimental results obtained by Maximum Likelihood estimation, in cases where the number of results is finite and the log likelihood function is not a symmetric parabola. This note discusses how separate asymmetric errors on a single result should be combined, and how several results with asymmetric errors should be combined to give an overall measurement…
▽ More
Asymmetric statistical errors arise for experimental results obtained by Maximum Likelihood estimation, in cases where the number of results is finite and the log likelihood function is not a symmetric parabola. This note discusses how separate asymmetric errors on a single result should be combined, and how several results with asymmetric errors should be combined to give an overall measurement. In the process it considers several methods for parametrising curves that are approximately parabolic.
△ Less
Submitted 24 June, 2004;
originally announced June 2004.
-
A note on Delta ln L = -1/2 Errors
Authors:
Roger Barlow
Abstract:
The points at which the log likelihood falls by 1/2 from its maximum value are often used to give the `errors' on a result, i.e. the 68% central confidence interval. The validity of this is examined for two simple cases: a lifetime measurement and a Poisson measurement. Results are compared with the exact Neyman construction and with the simple Bartlett approximation. It is shown that the accura…
▽ More
The points at which the log likelihood falls by 1/2 from its maximum value are often used to give the `errors' on a result, i.e. the 68% central confidence interval. The validity of this is examined for two simple cases: a lifetime measurement and a Poisson measurement. Results are compared with the exact Neyman construction and with the simple Bartlett approximation. It is shown that the accuracy of the log likelihood method is poor, and the Bartlett construction explains why it is flawed.
△ Less
Submitted 5 March, 2004;
originally announced March 2004.
-
Asymmetric Errors
Authors:
Roger Barlow
Abstract:
Errors quoted on results are often given in asymmetric form. An account is given of the two ways these can arise in an analysis, and the combination of asymmetric errors is discussed. It is shown that the usual method has no basis and is indeed wrong. For asymmetric systematic errors, a consistent method is given, with detailed examples. For asymmetric statistical errors a general approach is ou…
▽ More
Errors quoted on results are often given in asymmetric form. An account is given of the two ways these can arise in an analysis, and the combination of asymmetric errors is discussed. It is shown that the usual method has no basis and is indeed wrong. For asymmetric systematic errors, a consistent method is given, with detailed examples. For asymmetric statistical errors a general approach is outlined.
△ Less
Submitted 9 January, 2004;
originally announced January 2004.
-
Introduction to Statistical Issues in Particle Physics
Authors:
Roger Barlow
Abstract:
An account is given of the methods of working of Experimental High Energy Particle Physics, from the viewpoint of statisticians and others unfamiliar with the field. Current statistical problems, techniques, and hot topics are introduced and discussed.
An account is given of the methods of working of Experimental High Energy Particle Physics, from the viewpoint of statisticians and others unfamiliar with the field. Current statistical problems, techniques, and hot topics are introduced and discussed.
△ Less
Submitted 20 November, 2003;
originally announced November 2003.
-
Asymmetric Systematic Errors
Authors:
Roger Barlow
Abstract:
Asymmetric systematic errors arise when there is a non-linear dependence of a result on a nuisance parameter. Their combination is traditionally done by adding positive and negative deviations separately in quadrature. There is no sound justification for this, and it is shown that indeed it is sometimes clearly inappropriate. Consistent techniques are given for this combination of errors, and al…
▽ More
Asymmetric systematic errors arise when there is a non-linear dependence of a result on a nuisance parameter. Their combination is traditionally done by adding positive and negative deviations separately in quadrature. There is no sound justification for this, and it is shown that indeed it is sometimes clearly inappropriate. Consistent techniques are given for this combination of errors, and also for evaluating $χ^2$, and for forming weighted sums.
△ Less
Submitted 18 June, 2003;
originally announced June 2003.
-
Use of the European Data Grid software in the framework of the BaBar distributed computing model
Authors:
D. Boutigny,
D. H. Smith,
E. Antonioli,
C. Bozzi,
E. Luppi,
P. Veronesi G. Grosdidier,
D. Colling,
J. Martyniak,
R. Walker,
R. Barlow,
A. Forti,
A. McNab,
P. Elmer,
T. Adye,
B. Bense,
R. D. Cowles,
A. Hasan,
D. A. Smith
Abstract:
We present an evaluation of the European Data Grid software in the framework of the BaBar experiment. Two kinds of applications have been considered: first, a typical data analysis on real data producing physics n-tuples, and second, a distributed Monte-Carlo production on a computational grid. Both applications will be crucial in a near future in order to make an optimal use of the distributed…
▽ More
We present an evaluation of the European Data Grid software in the framework of the BaBar experiment. Two kinds of applications have been considered: first, a typical data analysis on real data producing physics n-tuples, and second, a distributed Monte-Carlo production on a computational grid. Both applications will be crucial in a near future in order to make an optimal use of the distributed computing resources available throughout the collaboration.
△ Less
Submitted 10 June, 2003;
originally announced June 2003.
