-
Topological metasurface: From passive toward active and beyond
Authors:
Jian Wei You,
Zhihao Lan,
Qian Ma,
Zhen Gao,
Yihao Yang,
Fei Gao,
Meng Xiao,
Tie Jun Cui
Abstract:
Metasurfaces are subwavelength structured thin films consisting of arrays of units that allow the controls of polarization, phase and amplitude of light over a subwavelength thickness. The recent developments in topological photonics have greatly broadened the horizon in designing the metasurfaces for novel functional applications. In this review, we summarize recent progress in the research field…
▽ More
Metasurfaces are subwavelength structured thin films consisting of arrays of units that allow the controls of polarization, phase and amplitude of light over a subwavelength thickness. The recent developments in topological photonics have greatly broadened the horizon in designing the metasurfaces for novel functional applications. In this review, we summarize recent progress in the research field of topological metasurfaces, firstly from the perspectives of passive and active in the classical regime, and then in the quantum regime. More specifically, we begin by examining the passive topological phenomena in two-dimensional photonic systems, including both time-reversal broken systems and time-reversal preserved systems. Subsequently, we move to discuss the cutting-edge studies of the active topological metasurfaces, including nonlinear topological metasurfaces and reconfigurable topological metasurfaces. After overviewing the topological metasurfaces in the classical regime, we show how the topological metasurfaces could provide a new platform for quantum information and quantum many-body physics. Finally, we conclude and describe some challenges and future directions of this fast-evolving field.
△ Less
Submitted 29 December, 2022; v1 submitted 25 December, 2022;
originally announced December 2022.
-
Joint Detections of Frequency and Direction of Arrival in Wideband Based on Programmable Metasurface
Authors:
He Li,
Yun Bo Li,
Wang Sheng Hu,
Sheng Jie Huang,
Jia Lin Shen,
Shi Yu Wang,
Tie Jun Cui
Abstract:
We propose to achieve joint detections of frequency and direction of arrival in wideband using single sensor based on an active metasurface with programmable transmission states of pass and stop. By integrating two PIN diodes with the opposite directions into the proposed single-layer and ultrathin meta-atom, the transmission performance with 10 dB difference between the pass and stop states is re…
▽ More
We propose to achieve joint detections of frequency and direction of arrival in wideband using single sensor based on an active metasurface with programmable transmission states of pass and stop. By integrating two PIN diodes with the opposite directions into the proposed single-layer and ultrathin meta-atom, the transmission performance with 10 dB difference between the pass and stop states is realized in the bandwidth from 5.9 GHz to 8.8 GHz using field-circuit co-simulations. Accordingly, random receiving patterns are generated by controlling the programmable metasurface composed of the switchable meta-atoms. Afterwards, the frequency and direction information of sources located in the far field are detected using the modified algorithm of estimating signal parameters via rotational invariance techniques (ESPRIT) and the compressive sensing method, respectively. A sample of the programmable metasurface is fabricated and the voltage control system is built up correspondingly. To entirely verify the validity of the proposed method, we conduct three kinds of experiments with one single source, double sources with different frequencies, and double sources with the same frequency, respectively. In all cases, the source information of frequency and direction has been detected preciously in measurements in the frequency band from 6.2 GHz to 8.8 GHz.
△ Less
Submitted 22 October, 2022;
originally announced October 2022.
-
Directly wireless communication of human minds via non-invasive brain-computer-metasurface platform
Authors:
Qian Ma,
Wei Gao,
Qiang Xiao,
Lingsong Ding,
Tianyi Gao,
Yajun Zhou,
Xinxin Gao,
Tao Yan,
Che Liu,
Ze Gu,
Xianghong Kong,
Qammer H. Abbasi,
Lianlin Li,
Cheng-Wei Qiu,
Yuanqing Li,
Tie Jun Cui
Abstract:
Brain-computer interfaces (BCIs), invasive or non-invasive, have projected unparalleled vision and promise for assisting patients in need to better their interaction with the surroundings. Inspired by the BCI-based rehabilitation technologies for nerve-system impairments and amputation, we propose an electromagnetic brain-computer-metasurface (EBCM) paradigm, regulated by human's cognition by brai…
▽ More
Brain-computer interfaces (BCIs), invasive or non-invasive, have projected unparalleled vision and promise for assisting patients in need to better their interaction with the surroundings. Inspired by the BCI-based rehabilitation technologies for nerve-system impairments and amputation, we propose an electromagnetic brain-computer-metasurface (EBCM) paradigm, regulated by human's cognition by brain signals directly and non-invasively. We experimentally show that our EBCM platform can translate human's mind from evoked potentials of P300-based electroencephalography to digital coding information in the electromagnetic domain non-invasively, which can be further processed and transported by an information metasurface in automated and wireless fashions. Directly wireless communications of the human minds are performed between two EBCM operators with accurate text transmissions. Moreover, several other proof-of-concept mind-control schemes are presented using the same EBCM platform, exhibiting flexibly-customized capabilities of information processing and synthesis like visual-beam scanning, wave modulations, and pattern encoding.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Smart Radio Environments
Authors:
Gabriele Gradoni,
Marco Di Renzo,
Ana Diaz-Rubio,
Sergei Tretyakov,
Christophe Caloz,
Zhen Peng,
Andrea Alu,
Geoffroy Lerosey,
Mathias Fink,
Vincenzo Galdi,
Tie Jun Cui,
Benjamin Frazier,
Steven Anlage,
Marco Salucci,
Andrea Massa,
Qiang Cheng,
Jinghe Wang,
Shi Jin,
Davide Dardari,
Nicolo Decarli,
Okan Yurduseven,
Michail Matthaiou,
Mitchell Kenney,
George Gordon,
Orestis Georgiou
, et al. (5 additional authors not shown)
Abstract:
This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures fo…
▽ More
This Roadmap takes the reader on a journey through the research in electromagnetic wave propagation control via reconfigurable intelligent surfaces. Meta-surface modelling and design methods are reviewed along with physical realisation techniques. Several wireless applications are discussed, including beam-forming, focusing, imaging, localisation, and sensing, some rooted in novel architectures for future mobile communications networks towards 6G.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
The Design of Programmable Transmitarray with Independent Controls of Transmission Amplitude and Phase
Authors:
He Li,
Yun Bo Li,
Chao Yue Gong,
Shu Yue Dong,
Shi Yu Wang,
Hai Peng Wang,
Tie Jun Cui
Abstract:
A design method of programmable transmitarray with independent controls of transmission amplitude and phase is proposed in C-band. The unit cell with cascaded structures mainly consists of four parts, including the receiving antenna, reconfigurable attenuator with PIN diodes, reconfigurable phase shifter with varactors and transmitting antenna. Correspondingly, various manipulations of spatial ele…
▽ More
A design method of programmable transmitarray with independent controls of transmission amplitude and phase is proposed in C-band. The unit cell with cascaded structures mainly consists of four parts, including the receiving antenna, reconfigurable attenuator with PIN diodes, reconfigurable phase shifter with varactors and transmitting antenna. Correspondingly, various manipulations of spatial electromagnetic (EM) fields are achieved by varying the bias voltages of PIN diodes and varactors in the transmitarray. The fabricated unit cell is measured in a standard waveguide, and the whole array with 8*8 unit cells is measured with two horns for calibration of the programmable EM features. The experimental results show that the transmission magnitude can range from -16 dB to -3.6 dB and the transmission phase achieves 270-degree coverage independently under the 16-bit programmable control. To further exhibit the capability and functionality of the proposed transmitarray, the waveform engineering of adaptive beamforming and power-allocation beamforming are separately realized in the experiment. The measured results have good agreements with our theoretical calculations, verifying the validity of our design method.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Reprogrammable plasmonic topological insulators with ultrafast control
Authors:
Jian Wei You,
Qian Ma,
Zhihao Lan,
Qiang Xiao,
Nicolae C. Panoiu,
Tie Jun Cui
Abstract:
Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Developing a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the t…
▽ More
Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Developing a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the topological propagation route can be dynamically steered at nanosecond-level switching time, namely more than 10^7 times faster than the current state-of-the-art. This orders-of-magnitude improvement is achieved by using ultrafast electronic switches in an innovative way to implement the programmability. Due to the flexible programmability, many existing photonic topological functionalities can be integrated into this agile topological platform. Our work brings the current studies of photonic topological insulators to a digital and intelligent era, which could boost the development of intelligent and ultrafast photoelectric devices with built-in topological protection.
△ Less
Submitted 26 December, 2020;
originally announced December 2020.
-
Arbitrary manipulations of dual harmonics and their wave behaviors based on space-time-coding digital metasurface
Authors:
Jun Yan Dai,
Jin Yang,
Wankai Tang,
Ming Zheng Chen,
Jun Chen Ke,
Qiang Cheng,
Shi Jin,
Tie Jun Cui
Abstract:
Space-time modulated metasurfaces have attracted significant attention due to the additional degree of freedom in manipulating the electromagnetic (EM) waves in both space and time domains. However, the existing techniques have limited wave control capabilities, leading to just a few feasible schemes like regulation of only one specific harmonic. Here, we propose to realize independent manipulatio…
▽ More
Space-time modulated metasurfaces have attracted significant attention due to the additional degree of freedom in manipulating the electromagnetic (EM) waves in both space and time domains. However, the existing techniques have limited wave control capabilities, leading to just a few feasible schemes like regulation of only one specific harmonic. Here, we propose to realize independent manipulations of arbitrarily dual harmonics and their wave behaviors using a space-time-coding (STC) digital metasurface. By employing different STC sequences to the reflection phase of the metasurface, independent phase-pattern configurations of two desired harmonics can be achieved simultaneously, which further leads to independent beam shaping at the two harmonic frequencies. An analytical theory is developed to offer the physical insights in the arbitrary dual-harmonic manipulations of spectra and spatial beams, which is verified by experiments with good agreements. The presented STC strategy provides a new way to design multifunctional programmable systems, which will find potential applications such as cognitive radar and multi-user wireless communications.
△ Less
Submitted 26 June, 2020;
originally announced July 2020.
-
How Do Space-Time Digital Metasurfaces Serve to Perform Analog Signal Processing?
Authors:
Hamid Rajabalipanah,
Ali Abdolali,
Shahid Iqbal,
Lei Zhang,
Tie Jun Cui
Abstract:
In the quest to realize analog signal processing using sub-wavelength metasurfaces, in this paper, we demonstrate the first experimental demonstration of programmable time-modulated metasurface processors based on the key properties of spatial Fourier transformation. Exploiting space-time coding strategy enables local, independent, and real-time engineering of not only amplitude but also phase pro…
▽ More
In the quest to realize analog signal processing using sub-wavelength metasurfaces, in this paper, we demonstrate the first experimental demonstration of programmable time-modulated metasurface processors based on the key properties of spatial Fourier transformation. Exploiting space-time coding strategy enables local, independent, and real-time engineering of not only amplitude but also phase profile of the contributing reflective digital meta-atoms at both central and harmonic frequencies. Several illustrative examples are demonstrated to show that the proposed multifunctional calculus metasurface is capable of implementing a large class of useful mathematical operators, including 1st- and 2nd-order spatial differentiation, 1st-order spatial integration, and integro-differential equation solving accompanied by frequency conversions. Unlike the recent proposals, the designed time-modulated signal processor effectively operates for input signals containing wide spatial frequency bandwidths with an acceptable gain level. Proof-of-principle simulations are also reported along with the successful realization of image processing functions like edge detection. This time-varying wave-based computing system can set the direction for future developments of programmable metasurfaces with highly promising applications in ultrafast equation solving, real-time and continuous signal processing, and imaging.
△ Less
Submitted 18 February, 2020; v1 submitted 17 February, 2020;
originally announced February 2020.
-
Metasurface-Assisted Passive Wireless Communication with Commodity Wi-Fi Signals
Authors:
Hanting Zhao,
Ya Shuang,
Menglin Wei,
Tie Jun Cui,
Philipp del Hougne,
Lianlin Li
Abstract:
Wireless communication has become a standard solution to address ever-increasing demands for information transfer in our modern society. Conventional systems work in an active way in the sense that an active carrier signal is mandatorily required to transfer information from Alice to Bob. Especially in the era of 5G6G and with the advent of the Internet of Things (IoT), an exponential growth of us…
▽ More
Wireless communication has become a standard solution to address ever-increasing demands for information transfer in our modern society. Conventional systems work in an active way in the sense that an active carrier signal is mandatorily required to transfer information from Alice to Bob. Especially in the era of 5G6G and with the advent of the Internet of Things (IoT), an exponential growth of users and connectivity confronts conventional systems with important challenges including limited spectrum resources, information security, energy consumption and cost efficiency. Here, we introduce the fundamentally different concept of passive wireless communication (PWC) which has the potential to resolve the above-mentioned issues. PWC transfers digital information by modulating demodulating already existing omnipresent ambient stray electromagnetic waves using a programmable metasurface. We provide a theoretical framework for encoding decoding and modulating demodulating in PWC and build a proof-of-principle prototype system leveraging existing commodity 2.4GHz Wi-Fi signals. We demonstrate information transfer from Alice to Bob with data rates on the order of hundreds of Kbps using distinguishable information-carrying control coding patterns of metasurface, neither necessitating an active carrier signal and its associated radio-frequency chain nor affecting the background active wireless communication. The presented strategy is particularly appealing for green IoT connectivity. At the same time, the concept is applicable to all types of wave phenomena and provides a fundamentally new perspective on the design of future wireless communication architectures.
△ Less
Submitted 30 April, 2020; v1 submitted 26 January, 2020;
originally announced January 2020.
-
Intelligent Electromagnetic Sensing with Learnable Data Acquisition and Processing
Authors:
Hao-Yang Li,
Han-Ting Zhao,
Meng-Lin Wei,
Heng-Xin Ruan,
Ya Shuang,
Tie Jun Cui,
Lianlin Li
Abstract:
Electromagnetic (EM) sensing is a wide-spread contactless examination technique in science, engineering and military. However, conventional sensing systems are mostly lack of intelligence, which not only require expensive hardware and complicated computational algorithms, but also pose important challenges for advanced in-situ sensing. To address this shortcoming, we propose the concept of intelli…
▽ More
Electromagnetic (EM) sensing is a wide-spread contactless examination technique in science, engineering and military. However, conventional sensing systems are mostly lack of intelligence, which not only require expensive hardware and complicated computational algorithms, but also pose important challenges for advanced in-situ sensing. To address this shortcoming, we propose the concept of intelligent sensing by designing a programmable metasurface for data-driven learnable data acquisition, and integrating it into a data-driven learnable data processing pipeline. This strategy allows to learn an optimal sensing chain in systematic sense of variational autoencoder, i.e., to jointly learn an optimal measurement strategy along with matching data post processing schemes. A three-port deep artificial neural network (ANN) is designed to characterize the measurement process, such that an optimal measurement strategy is adaptive to the subject of interest by controlling the programmable metasurface for manipulating the EM illuminations. We design and fabricate a proof-of-principle sensing system in microwave, and demonstrate experimentally its significance on the high-quality imaging and high-accuracy object recognition from a remarkably reduced number of measurements. We faithfully expect that the presented methodology will provide us with a fundamentally new perspective on the design of intelligent sensing architectures at various frequencies, and beyond.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Intelligent Metasurface Imager and Recognizer
Authors:
Lianlin Li,
Ya Shuang,
Qian Ma,
Haoyang Li,
Hanting Zhao,
Menglin Wei1,
Che Liu,
Chenglong Hao,
Cheng-Wei Qiu,
Tie Jun Cui
Abstract:
It is ever-increasingly demanded to remotely monitor people in daily life using radio-frequency probing signals. However, conventional systems can hardly be deployed in real-world settings since they typically require objects to either deliberately cooperate or carry a wireless active device or identification tag. To accomplish the complicated successive tasks using a single device in real time, w…
▽ More
It is ever-increasingly demanded to remotely monitor people in daily life using radio-frequency probing signals. However, conventional systems can hardly be deployed in real-world settings since they typically require objects to either deliberately cooperate or carry a wireless active device or identification tag. To accomplish the complicated successive tasks using a single device in real time, we propose a smart metasurface imager and recognizer simultaneously, empowered by a network of artificial neural networks (ANNs) for adaptively controlling data flow. Here, three ANNs are employed in an integrated hierarchy: transforming measured microwave data into images of whole human body; classifying the specifically designated spots (hand and chest) within the whole image; and recognizing human hand signs instantly at Wi-Fi frequency of 2.4 GHz. Instantaneous in-situ imaging of full scene and adaptive recognition of hand signs and vital signs of multiple non-cooperative people have been experimentally demonstrated. We also show that the proposed intelligent metasurface system work well even when it is passively excited by stray Wi-Fi signals that ubiquitously exist in our daily lives. The reported strategy could open a new avenue for future smart cities, smart homes, human-device interactive interfaces, healthy monitoring, and safety screening free of visual privacy issues.
△ Less
Submitted 2 September, 2019;
originally announced October 2019.
-
Fully-control of OAM vortex beam and realization of retro and negative reflection at oblique incidence using dual-band 2-bit coding metasurface
Authors:
Hamza Ahmad Madni,
Shahid Iqbal,
Shuo Liu,
Lei Zhang,
Tie Jun Cui
Abstract:
This paper addresses a reflection-type dual-band 2-bit coding metasurface (CM) design to achieve the dual-band functionalities in two different operating bands, independently. We are particularly interested to control linearly-polarized incident waves by encoding the propagation / dynamic phase in order to realize and fully control the orbital angular momentum (OAM) vortex beam (VB) for dual-band,…
▽ More
This paper addresses a reflection-type dual-band 2-bit coding metasurface (CM) design to achieve the dual-band functionalities in two different operating bands, independently. We are particularly interested to control linearly-polarized incident waves by encoding the propagation / dynamic phase in order to realize and fully control the orbital angular momentum (OAM) vortex beam (VB) for dual-band, independently. In this regard, we perform digital addition operations to combine the coding sequences of traditional OAM and phase-gradient to construct the proposed CM. The proposed CM generates and steers the OAM-VB with different topological charges in both lower and higher bands, independently. Similarly, the proposed CM is further extended for OAM-VB shaping by combining the coding sequences of traditional OAM and splitting phase unit-cells, and, we discuss two different scenarios. Firstly, OAM-VB splitting is performed to achieve different topological charges in both lower and higher bands, independently. Secondly, quad-beam shaping is realized to verify the proposed concept of this paper. Finally yet importantly, we also examine that the reflected beam directions can be further independently controlled to achieve anomalous, negative and retro-reflection at two different operating bands. The proposed concept will open up possibilities of multi-functional meta-devices and will be useful in many applications such as optical spanners, quantum optics, spatial mode multiplexing for telecommunications, and astronomy etc.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Controlling spectral energies of all harmonics in programmable way using time-domain digital coding metasurface
Authors:
Jie Zhao,
Xi Yang,
Jun Yan Dai,
Qiang Cheng,
Xiang Li,
Ning Hua Qi,
Jun Chen Ke,
Guo Dong Bai,
Shuo Liu,
Shi Jin,
Tie Jun Cui
Abstract:
Modern wireless communication is one of the most important information technologies, but its system architecture has been unchanged for many years. Here, we propose a much simpler architecture for wireless communication systems based on metasurface. We firstly propose a time-domain digital coding metasurface to reach a simple but efficient method to manipulate spectral distributions of harmonics.…
▽ More
Modern wireless communication is one of the most important information technologies, but its system architecture has been unchanged for many years. Here, we propose a much simpler architecture for wireless communication systems based on metasurface. We firstly propose a time-domain digital coding metasurface to reach a simple but efficient method to manipulate spectral distributions of harmonics. Under dynamic modulations of phases on surface reflectivity, we could achieve accurate controls to different harmonics in a programmable way to reach many unusual functions like frequency cloaking and velocity illusion, owing to the temporal gradient introduced by digital signals encoded by '0' and '1' sequences. A theoretical model is presented and experimentally validated to reveal the nonlinear process. Based on the time-domain digital coding metasurface, we propose and realize a new wireless communication system in binary frequency-shift keying (BFSK) frame, which has much more simplified architecture than the traditional BFSK with excellent performance for real-time message transmission. The presented work, from new concept to new system, will find important applications in modern information technologies.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
A novel EM concentrator with open-concentrator region based on multi-folded transformation optics
Authors:
Hamza Ahmad Madni,
Khurram Hussain,
Wei Xiang Jiang,
Shuo Liu,
Asad Aziz,
Shahid Iqbal,
Athar Mahboob,
Tie Jun Cui
Abstract:
Conventional concentrators with inhomogeneous coating materials that fully enclose the destined region pose great challenges for fabrication. In this paper, we propose to design an EM concentrator with homogeneous materials. Distinguished from conventional ones, the elaborately designed EM concentrator features a concentrator region that is open to the outer-world, which is achieved with multi-fol…
▽ More
Conventional concentrators with inhomogeneous coating materials that fully enclose the destined region pose great challenges for fabrication. In this paper, we propose to design an EM concentrator with homogeneous materials. Distinguished from conventional ones, the elaborately designed EM concentrator features a concentrator region that is open to the outer-world, which is achieved with multi-folded transformation optics method by compressing and folding the coating materials to create window(s). Based on this concept, we also investigate open-rotator and open rotational-concentrator devices, which could simultaneously rotate and store the EM waves in the central destined region. Due to the open nature of our proposed designs, we believe they will find potential applications in remote controlling with impressive new functionalities.
△ Less
Submitted 3 July, 2018; v1 submitted 29 April, 2018;
originally announced May 2018.
-
Wideband Bandpass Filters Based on Multipole Resonances of Spoof Localized Surface Plasmons
Authors:
Xuanru Zhang,
Di Bao,
Jun Feng Liu,
Tie Jun Cui
Abstract:
We propose wideband bandpass filters based on multipole resonances of spoof localized surface plasmons (SLSPs). The resonance characteristics and geometric tunability of SLSPs are investigated under microstrip excitations. Strong coupling with interlayer microstrip lines is proposed to join discrete multipole resonances into a continuous and flat passband. The SLSP filters exhibit wide passbands i…
▽ More
We propose wideband bandpass filters based on multipole resonances of spoof localized surface plasmons (SLSPs). The resonance characteristics and geometric tunability of SLSPs are investigated under microstrip excitations. Strong coupling with interlayer microstrip lines is proposed to join discrete multipole resonances into a continuous and flat passband. The SLSP filters exhibit wide passbands in compact sizes and well-balanced shapes, while holding satisfactory spurious rejection bands, group delays, and geometric tunability. This work exposes the SLSPs' application potential in filters as novel resonators.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Large-aperture computational single-sensor microwave imager using 1-bit programmable coding metasurface at single frequency
Authors:
Dapeng Lao,
Lianlin Li,
Jun Ding,
Yun Bo Li,
Tie Jun Cui
Abstract:
The microwave imaging based on inverse scattering strategy holds important promising in the science, engineering, and military applications. Here we present a compressed-sensing (CS) inspired large- aperture computational single-sensor imager using 1-bit programmable coding metasurface for efficient microwave imaging, which is an instance of the coded aperture imaging system. However, unlike a con…
▽ More
The microwave imaging based on inverse scattering strategy holds important promising in the science, engineering, and military applications. Here we present a compressed-sensing (CS) inspired large- aperture computational single-sensor imager using 1-bit programmable coding metasurface for efficient microwave imaging, which is an instance of the coded aperture imaging system. However, unlike a conventional coded aperture imager where elements on random mask are manipulated in the pixel-wised manner, the controllable elements in the proposed scheme are encoded in a column-row-wised manner. As a consequence, this single-sensor imager has a reduced data-acquisition time with improved obtainable temporal and spatial resolutions. Besides, we demonstrate that the proposed computational single-shot imager has a theoretical guarantee on the successful recovery of a sparse or compressible object from its reduced measurements by solving a sparsity-regularized convex optimization problem, which is comparable to that by the conventional pixel-wise coded imaging system. The excellent performance of the proposed imager is validated by both numerical simulations and experiments for the high-resolution microwave imaging.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
Microwave Vortex-Beam Emitter Based on Spoof Surface Plasmon Polaritons
Authors:
Jia Yuan Yin,
Jian Ren,
Lei Zhang,
Haijiang Li,
Tie Jun Cui
Abstract:
Since the orbital angular momentum (OAM) being investigated intensively in the optical region, there are growing interests in employing OAM to solve the problem in wireless communications as a new method. It is found that the independence between different OAM modes is crucial to wireless communications. Motivated by the tremendous potential of OAM in communication systems, we propose a novel meth…
▽ More
Since the orbital angular momentum (OAM) being investigated intensively in the optical region, there are growing interests in employing OAM to solve the problem in wireless communications as a new method. It is found that the independence between different OAM modes is crucial to wireless communications. Motivated by the tremendous potential of OAM in communication systems, we propose a novel method to generate vortex beams by spoof surface plasmon polaritons (SPPs). A looped double-layer spoof SPP waveguide is applied to realize the transmission of electromagnetic waves. Beam emitting is accomplished through a series of circular patches, whose role is not only the radiation units but also resonators giving rise to the phase shifts required by the vortex beam. The proposed method is validated by both numerical calculation and experiment. The measured results show that the spoof SPPs are radiated by the circular patches and the vortex beam carrying different OAM modes are observed at different frequencies. This is the first time to generate the OAM modes by spoof SPPs. The proposed method possesses smaller size and is much easier to be integrated into integrated circuits. The simple structure and design procedure make the proposed method promising in future wireless communication systems.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Spoof Plasmon Hybridization
Authors:
Jingjing Zhang,
Zhen Liao,
Yu Luo,
Xiaopeng Shen,
Stefan A. Maier,
Tie Jun Cui
Abstract:
Plasmon hybridization between closely spaced nanoparticles yields new hybrid modes not found in individual constituents, allowing for the engineering of resonance properties and field enhancement capabilities of metallic nanostructure. Experimental verifications of plasmon hybridization have been thus far mostly limited to optical frequencies, as metals cannot support surface plasmons at longer wa…
▽ More
Plasmon hybridization between closely spaced nanoparticles yields new hybrid modes not found in individual constituents, allowing for the engineering of resonance properties and field enhancement capabilities of metallic nanostructure. Experimental verifications of plasmon hybridization have been thus far mostly limited to optical frequencies, as metals cannot support surface plasmons at longer wavelengths. Here, we introduce the concept of 'spoof plasmon hybridization' in highly conductive metal structures and investigate experimentally the interaction of localized surface plasmon resonances (LSPR) in adjacent metal disks corrugated with subwavelength spiral patterns. We show that the hybridization results in the splitting of spoof plasmon modes into bonding and antibonding resonances analogous to molecular orbital rule and plasmonic hybridization in optical spectrum. These hybrid modes can be manipulated to produce enormous field enhancements (larger than 5000) by tuning the separation between disks or alternatively, the disk size, which effectively changes the relative gap size. The impact of the radiation loss is considered to find out the optimum disk size that maximizes field enhancement capabilities. Our investigation not only extends the range of applicability of the hybridization model, but also provides insightful guidance to exporting the exciting applications associated with plasmon hybridization to lower spectral range.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
Leaky-Wave Radiations by Modulating Surface Impedance on Subwavelength Corrugated Metal Structures
Authors:
Ben Geng Cai,
Yun Bo Li,
Hui Feng Ma,
Wei Xiang Jiang,
Qiang Cheng,
Tie Jun Cui
Abstract:
One-dimensional (1D) subwavelength corrugated metal structures has been described to support spoof surface plasmon polaritons (SPPs). Here we demonstrate that a modulated 1D subwavelength corrugated metal structure can convert spoof SPPs to propagating waves. The structure is fed at the center through a slit with a connected waveguide on the input side. The subwavelength corrugated metal structure…
▽ More
One-dimensional (1D) subwavelength corrugated metal structures has been described to support spoof surface plasmon polaritons (SPPs). Here we demonstrate that a modulated 1D subwavelength corrugated metal structure can convert spoof SPPs to propagating waves. The structure is fed at the center through a slit with a connected waveguide on the input side. The subwavelength corrugated metal structure on the output surface is regarded as metasurface and modulated periodically to realize the leaky-wave radiation at the broadside. The surface impedance of the corrugated metal structure is modulated by using cosine function and triangle-wave function, respectively, to reach the radiation effect. Full wave simulations and measuremental results are presented to validate the proposed design.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Polarization-controlled anisotropic coding metamaterials at terahertz frequencies
Authors:
Shuo Liu,
Tie Jun Cui,
Quan Xu,
Di Bao,
Liangliang Du,
Xiang Wan,
Wen Xuan Tang,
Chunmei Ouyang,
Xiao Yang Zhou,
Hao Yuan,
Hui Feng Ma,
Wei Xiang Jiang,
Jiaguang Han,
Weili Zhang,
Qiang Cheng
Abstract:
Metamaterials based on effective media have achieved a lot of unusual physics (e.g. negative refraction and invisibility cloaking) owing to their abilities to tailor the effective medium parameters that do not exist in nature. Recently, coding metamaterials have been suggested to control electromagnetic waves by designing the coding sequences of digital elements '0' and '1', which possess opposite…
▽ More
Metamaterials based on effective media have achieved a lot of unusual physics (e.g. negative refraction and invisibility cloaking) owing to their abilities to tailor the effective medium parameters that do not exist in nature. Recently, coding metamaterials have been suggested to control electromagnetic waves by designing the coding sequences of digital elements '0' and '1', which possess opposite phase responses. Here, we propose the concept of anisotropic coding metamaterial at terahertz frequencies, in which coding behaviors in different directions are dependent on the polarization status of terahertz waves. We experimentally demonstrate an ultrathin and flexible polarization-controlled anisotropic coding metasurface functioning in the terahertz regime using specially- designed coding elements. By encoding the elements with elaborately-designed digital sequences (in both 1 bit and 2 bits), the x- and y-polarized reflected waves can be deflected or diffused independently in three dimensions. The simulated far-field scattering patterns as well as near-electric-field distributions are given to illustrate the bifunctional performance of the encoded metasurface, which show good agreement to the measurement results. We further demonstrate the abilities of anisotropic coding metasurface to generate beam splitter and realize anomalous reflection and polarization conversion simultaneously, providing powerful controls of differently-polarized terahertz waves. The proposed method enables versatile beam behaviors under orthogonal polarizations using a single metasurface, and hence will promise interesting terahertz devices.
△ Less
Submitted 11 September, 2015;
originally announced September 2015.
-
Second-Harmonic Generation of Spoof Surface Plasmon Polaritons Using Nonlinear Plasmonic Metamaterials
Authors:
Hao Chi Zhang,
Yifeng Fan,
Jian Guo,
Xiaojian Fu,
Lianming Li,
Cheng Qian,
Tie Jun Cui
Abstract:
The second harmonic generation is one of the most important applications of nonlinear effect, which has attracted great interests in nonlinear optics and microwave in the past decades. To the best of our knowledge, however, generating the second harmonics of surface plasmon polaritons (SPPs) has not been reported. Here, we propose to generate the second harmonics of spoof SPPs with high efficiency…
▽ More
The second harmonic generation is one of the most important applications of nonlinear effect, which has attracted great interests in nonlinear optics and microwave in the past decades. To the best of our knowledge, however, generating the second harmonics of surface plasmon polaritons (SPPs) has not been reported. Here, we propose to generate the second harmonics of spoof SPPs with high efficiency at microwave frequencies using subwavelength-scale nonlinear active device integrated on specially designed plasmonic waveguides, which are composed of two ultrathin corrugated metallic strips printed on the top and bottom surfaces of a thin dielectric slab anti-symmetrically. We show that the plasmonic waveguide supports broadband propagations of spoof SPPs with strong subwavelength effect, whose dispersion property can be controlled by changing the geometrical parameters. By loading the nonlinear device made from semiconductors to the intersection of two plasmonic waveguides with different corrugation depths, we experimentally demonstrate the efficient generation of second-harmonic SPPs in broad frequency band. The proposed second-harmonic generator can be directly used as SPP frequency multiplier, and the proposed method can be extended to achieve high-order harmonics and produce SPP mixers, which are essential to SPP integrated circuits and systems.
△ Less
Submitted 13 May, 2015;
originally announced May 2015.
-
Breaking the challenge of signal integrity using time-domain spoof surface plasmon polaritons
Authors:
Hao Chi Zhang,
Tie Jun Cui,
Qian Zhang,
Yifeng Fan,
Xiaojian Fu
Abstract:
In modern integrated circuits and wireless communication systems/devices, three key features need to be solved simultaneously to reach higher performance and more compact size: signal integrity, interference suppression, and miniaturization. However, the above-mentioned requests are almost contradictory using the traditional techniques. To overcome this challenge, here we propose time-domain spoof…
▽ More
In modern integrated circuits and wireless communication systems/devices, three key features need to be solved simultaneously to reach higher performance and more compact size: signal integrity, interference suppression, and miniaturization. However, the above-mentioned requests are almost contradictory using the traditional techniques. To overcome this challenge, here we propose time-domain spoof surface plasmon polaritons (SPPs) as the carrier of signals. By designing a special plasmonic waveguide constructed by printing two narrow corrugated metallic strips on the top and bottom surfaces of a dielectric substrate with mirror symmetry, we show that spoof SPPs are supported from very low frequency to the cutoff frequency with strong subwavelength effects, which can be converted to the time-domain SPPs. When two such plasmonic waveguides are tightly packed with deep-subwavelength separation, which commonly happens in the integrated circuits and wireless communications due to limited space, we demonstrate theoretically and experimentally that SPP signals on such two plasmonic waveguides have better propagation performance and much less mutual coupling than the conventional signals on two traditional microstrip lines with the same size and separation. Hence the proposed method can achieve significant interference suppression in very compact space, providing a potential solution to break the challenge of signal integrity.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
High-order localized spoof surface plasmon resonances and experimental verifications
Authors:
Zhen Liao,
Yu Luo,
Antonio I. Fernández-DomÃnguez,
Xiaopeng Shen,
Stefan A. Maier,
Tie Jun Cui
Abstract:
We theoretically demonstrated and experimentally verified high-order radial spoof localized surface plasmon resonances supported by textured metal particles. Through an effective medium theory and exact numerical simulations, we show the emergence of these geometrically-originated electromagnetic modes at microwave frequencies. The occurrence of high-order radial spoof plasmon resonances is experi…
▽ More
We theoretically demonstrated and experimentally verified high-order radial spoof localized surface plasmon resonances supported by textured metal particles. Through an effective medium theory and exact numerical simulations, we show the emergence of these geometrically-originated electromagnetic modes at microwave frequencies. The occurrence of high-order radial spoof plasmon resonances is experimentally verified in ultrathin disks. Their spectral and near-field properties are characterized experimentally, showing an excellent agreement with theoretical predictions. Our findings shed light into the nature of spoof localized surface plasmons, and open the way to the design of broadband plasmonic devices able to operate at very different frequency regimes.
△ Less
Submitted 16 February, 2015;
originally announced February 2015.
-
Coding Metamaterials, Digital Metamaterials and Programming Metamaterials
Authors:
Tie Jun Cui,
Mei Qing Qi,
Xiang Wan,
Jie Zhao,
Qiang Cheng
Abstract:
As artificial structures, metamaterials are usually described by macroscopic effective medium parameters, which are named as "analog metamaterials". Here, we propose "digital metamaterials" in two steps. Firstly, we present "coding metamaterials" that are composed of only two kinds of unit cells with 0 and Ï€ phase responses, which we name as "0" and "1" elements. By coding "0" and "1" elements wit…
▽ More
As artificial structures, metamaterials are usually described by macroscopic effective medium parameters, which are named as "analog metamaterials". Here, we propose "digital metamaterials" in two steps. Firstly, we present "coding metamaterials" that are composed of only two kinds of unit cells with 0 and π phase responses, which we name as "0" and "1" elements. By coding "0" and "1" elements with controlled sequences (i.e., 1-bit coding), we can manipulate electromagnetic (EM) waves and realize different functionalities. The concept of coding metamaterial can be extended from 1-bit coding to 2-bit or more. In 2-bit coding, four kinds of unit cells with phase responses 0, π/2, π, and 3π/2 are required to mimic "00", "01", "10" and "11" elements, which have larger freedom to control EM waves. Secondly, we propose a unique metamaterial particle which has either "0" or "1" response controlled by a biased diode. Based on the particle, we present "digital metamaterials" with unit cells having either "0" or "1" state. Using the field-programmable gate array, we realize to control the digital metamaterial digitally. By programming different coding sequences, a single digital metamaterial has distinct abilities in manipulating EM waves, realizing the "programming metamaterials". The above concepts and physical phenomena are confirmed by numerical simulations and experiments through metasurfaces.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
Far-field subwavelength imaging from a single broadband antenna in combined with strongly disordered medium
Authors:
Lianlin Li,
Fang Li,
Tie Jun Cui
Abstract:
The far-field subwavlength imaging is a challenging issue. In this letter we demonstrate numerically that the far-field subwavelength imaging of weakly scattering objects can be obtained by processing the data acquired by a single antenna, which benefits from the use of the strongly disordered medium. A mathematical model has been proposed for solving such problem based on the idea of sparse recon…
▽ More
The far-field subwavlength imaging is a challenging issue. In this letter we demonstrate numerically that the far-field subwavelength imaging of weakly scattering objects can be obtained by processing the data acquired by a single antenna, which benefits from the use of the strongly disordered medium. A mathematical model has been proposed for solving such problem based on the idea of sparse reconstruction. Moreover, this study leads to an important conclusion that the strongly disordered medium can serves as an efficient apparatus for the single-antenna compressive measurement, which shifts the complexity of devising compressive sensing (CS) hardware from the design, fabrication and electronic control. The proposed method and associated results can find applications in several imaging disciplines, such as optics, THz, RF or ultrasound imaging.
△ Less
Submitted 15 January, 2014;
originally announced January 2014.
-
Subwavelength imaging of sparse broadband sources surrounded by an open disordered medium from a single antenna
Authors:
Lianlin Li,
Fang Li,
Tie Jun Cui
Abstract:
In this letter we study the subwavelength imaging of sparse broadband sources inside a disordered medium by processing the data acquired by a single antenna. A mathematical model has been developed for solving such problem based on the idea of sparse reconstruction. We show that the strongly disordered medium can serves as an efficient apparatus for compressive measurement, which shifts the comple…
▽ More
In this letter we study the subwavelength imaging of sparse broadband sources inside a disordered medium by processing the data acquired by a single antenna. A mathematical model has been developed for solving such problem based on the idea of sparse reconstruction. We show that the strongly disordered medium can serves as an efficient apparatus for compressive measurement, which shifts the complexity of devising compressive sensing (CS) hardware from the design, fabrication and electronic control. The proposed method and associated results can find applications in several imaging disciplines, such as optics, THz, RF or ultrasound imaging.
△ Less
Submitted 15 January, 2014;
originally announced January 2014.
-
Super-resolution image transfer by a vortex-like metamaterial
Authors:
Hui Yuan Dong,
Jin Wang,
Kin Hung Fung,
Tie Jun Cui
Abstract:
We propose a vortex-like metamaterial device that is capable of transferring image along a spiral route without losing subwavelength information of the image. The super-resolution image can be guided and magnified at the same time with one single design. Our design may provide insights in manipulating super-resolution image in a more flexible manner. Examples are given and illustrated with numeric…
▽ More
We propose a vortex-like metamaterial device that is capable of transferring image along a spiral route without losing subwavelength information of the image. The super-resolution image can be guided and magnified at the same time with one single design. Our design may provide insights in manipulating super-resolution image in a more flexible manner. Examples are given and illustrated with numerical simulations.
△ Less
Submitted 10 April, 2013;
originally announced April 2013.
-
One-way Tamm plasmon-polaritons on the interface of magnetophotonic crystals and conducting metal oxides
Authors:
Hui Yuan Dong,
Jin Wang,
Tie Jun Cui
Abstract:
We demonstrate theoretically the existence of one-way Tamm plasmon-polaritons on the interface between magnetophotonic crystals and conducting metal oxides. In contrast to conventional surface plasmon-polaritons (SPPs), Tamm plasmon-polariton (TPPs) occur at frequencies above the bulk plasma frequency of the conducting materials, provided that the dispersion curves of such surface modes lie outsid…
▽ More
We demonstrate theoretically the existence of one-way Tamm plasmon-polaritons on the interface between magnetophotonic crystals and conducting metal oxides. In contrast to conventional surface plasmon-polaritons (SPPs), Tamm plasmon-polariton (TPPs) occur at frequencies above the bulk plasma frequency of the conducting materials, provided that the dispersion curves of such surface modes lie outside the light cone for the conducting oxides and simultaneously fall into the photonic band gap of the magnetophotonic crystal. The nonreciprocal properties of TPPs are caused by violation of the periodicity and time reversal symmetry in the structure. Calculations on the field distribution and transmission spectra through the structure are employed to confirm the theoretical results, which could potentially impact on a broad range of SPP-related phenomena in applications.
△ Less
Submitted 20 October, 2012;
originally announced October 2012.
-
A class of line-transformed cloaks with easily-realizable constitutive parameters
Authors:
Wei Xiang Jiang,
Hui Feng Ma,
Qiang Cheng,
Tie Jun Cui
Abstract:
We propose a class of line-transformed cylindrical cloaks which have easily-realizable constitutive parameters. The scattering properties of such cloaks have been investigated numerically for both transverse-electric (TE) and transverse-magnetic (TM) incidences of plane waves. A line-transformed invisibility cloak with a perfectly electric conducting (PEC) inner boundary is actually a reshaping…
▽ More
We propose a class of line-transformed cylindrical cloaks which have easily-realizable constitutive parameters. The scattering properties of such cloaks have been investigated numerically for both transverse-electric (TE) and transverse-magnetic (TM) incidences of plane waves. A line-transformed invisibility cloak with a perfectly electric conducting (PEC) inner boundary is actually a reshaping of a PEC line to which the cloaked object is crushed. The numerical results of near-field distributions and far-field scattering properties have verified the above conclusions. We also investigate the relationship between the constitutive parameters of a line-transformed cloak and the length of the corresponding line. The changing range of constitutive parameters is large when the line is short, while the changing range becomes small when the line is long. The above conclusion provides an efficient way to realize the invisibility cloaks using artificial metamaterials.
△ Less
Submitted 12 October, 2009;
originally announced October 2009.
-
An electromagnetic black hole made of metamaterials
Authors:
Qiang Cheng,
Tie Jun Cui,
Wei Xiang Jiang,
Ben Geng Cai
Abstract:
Traditionally, a black hole is a region of space with huge gravitational field, which absorbs everything hitting it. In history, the black hole was first discussed by Laplace under the Newton mechanics, whose event horizon radius is the same as the Schwarzschild's solution of the Einstein's vacuum field equations. If all those objects having such an event horizon radius but different gravitational…
▽ More
Traditionally, a black hole is a region of space with huge gravitational field, which absorbs everything hitting it. In history, the black hole was first discussed by Laplace under the Newton mechanics, whose event horizon radius is the same as the Schwarzschild's solution of the Einstein's vacuum field equations. If all those objects having such an event horizon radius but different gravitational fields are called as black holes, then one can simulate certain properties of the black holes using electromagnetic fields and metamaterials due to the similar propagation behaviours of electromagnetic waves in curved space and in inhomogeneous metamaterials. In a recent theoretical work by Narimanov and Kildishev, an optical black hole has been proposed based on metamaterials, in which the theoretical analysis and numerical simulations showed that all electromagnetic waves hitting it are trapped and absorbed. Here we report the first experimental demonstration of such an electromagnetic black hole in the microwave frequencies. The proposed black hole is composed of non-resonant and resonant metamaterial structures, which can trap and absorb electromagnetic waves coming from all directions spirally inwards without any reflections due to the local control of electromagnetic fields and the event horizon corresponding to the device boundary. It is shown that the absorption rate can reach 99% in the microwave frequencies. We expect that the electromagnetic black hole could be used as the thermal emitting source and to harvest the solar light.
△ Less
Submitted 29 April, 2010; v1 submitted 12 October, 2009;
originally announced October 2009.
-
Compact-sized and broadband carpet cloak and free-space cloak
Authors:
Hui Feng Ma,
Wei Xiang Jiang,
Xin Mi Yang,
Xiao Yang Zhou,
Tie Jun Cui
Abstract:
Recently, invisible cloaks have attracted much attention due to their exciting property of invisibility, which are based on a solid theory of transformation optics and quasi-conformal mapping. Two kinds of cloaks have been proposed: free-space cloaks, which can render objects in free space invisible to incident radiation, and carpet cloaks (or ground cloaks), which can hide objects under the con…
▽ More
Recently, invisible cloaks have attracted much attention due to their exciting property of invisibility, which are based on a solid theory of transformation optics and quasi-conformal mapping. Two kinds of cloaks have been proposed: free-space cloaks, which can render objects in free space invisible to incident radiation, and carpet cloaks (or ground cloaks), which can hide objects under the conducting ground. The first free-space and carpet cloaks were realized in the microwave frequencies using metamaterials. The free-space cloak was composed of resonant metamaterials, and hence had restriction of narrow bandwidth and high loss; the carpet cloak was made of non-resonant metamaterials, which have broad bandwidth and low loss. However, the carpet cloak has a severe restriction of large size compared to the cloaked object. The above restrictions become the bottlenecks to the real applications of free-space and carpet cloaks. Here we report the first experimental demonstration of broadband and low-loss directive free-space cloak and compact-sized carpet cloak based on a recent theoretical study. Both cloaks are realized using non-resonant metamaterials in the microwave frequency, and good invisibility properties have been observed in experiments. This approach represents a major step towards the real applications of invisibility cloaks.
△ Less
Submitted 29 September, 2009;
originally announced September 2009.
-
Moving Targets Virtually Via Composite Optical Transformation
Authors:
Wei Xiang Jiang,
Tie Jun Cui
Abstract:
We propose a composite optical transformation to design an illusion device which can move the image of a target from one place to another place. Enclosed by such an illusion device, an arbitrary object located at one place appears to be at another place virtually. Different from the published shifted-position cloak which is composed of the left-handed materials with simultaneously negative permi…
▽ More
We propose a composite optical transformation to design an illusion device which can move the image of a target from one place to another place. Enclosed by such an illusion device, an arbitrary object located at one place appears to be at another place virtually. Different from the published shifted-position cloak which is composed of the left-handed materials with simultaneously negative permittivity and permeability, the illusion device proposed in this letter has positive permittivity and permeability. Hence proposed illusion device could be realized by artificial metamaterials.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
Illusion Media: Generating Virtual Objects Using Realizable Metamaterials
Authors:
Wei Xiang Jiang,
Hui Feng Ma,
Qiang Cheng,
Tie Jun Cui
Abstract:
We propose a class of optical transformation media, illusion media, which render the enclosed object invisible and generate one or more virtual objects as desired. We apply the proposed media to design a microwave device, which transforms an actual object into two virtual objects. Such an illusion device exhibits unusual electromagnetic behavior as verified by full-wave simulations. Different from…
▽ More
We propose a class of optical transformation media, illusion media, which render the enclosed object invisible and generate one or more virtual objects as desired. We apply the proposed media to design a microwave device, which transforms an actual object into two virtual objects. Such an illusion device exhibits unusual electromagnetic behavior as verified by full-wave simulations. Different from the published illusion devices which are composed of left-handed materials with simultaneously negative permittivity and permeability, the proposed illusion media have finite and positive permittivity and permeability. Hence the designed device could be realizable using artificial metamaterials.
△ Less
Submitted 3 April, 2010; v1 submitted 20 September, 2009;
originally announced September 2009.
-
Fast and accurate simulations of transmission-line metamaterials using transmission-matrix method
Authors:
Hui Feng Ma,
Tie Jun Cui,
Jessie Yao Chin,
Qiang Cheng
Abstract:
Recently, two-dimensional (2D) periodically L and C loaded transmission-line (TL) networks have been applied to represent metamaterials. The commercial Agilent's Advanced Design System (ADS) is a commonly-used tool to simulate the TL metamaterials. However, it takes a lot of time to set up the TL network and perform numerical simulations using ADS, making the metamaterial analysis inefficient, e…
▽ More
Recently, two-dimensional (2D) periodically L and C loaded transmission-line (TL) networks have been applied to represent metamaterials. The commercial Agilent's Advanced Design System (ADS) is a commonly-used tool to simulate the TL metamaterials. However, it takes a lot of time to set up the TL network and perform numerical simulations using ADS, making the metamaterial analysis inefficient, especially for large-scale TL networks. In this paper, we propose transmission-matrix method (TMM) to simulate and analyze the TL-network metamaterials efficiently. Compared to the ADS commercial software, TMM provides nearly the same simulation results for the same networks. However, the model-process and simulation time has been greatly reduced. The proposed TMM can serve as an efficient tool to study the TL-network metamaterials.
△ Less
Submitted 16 July, 2009;
originally announced July 2009.
-
Invisibility cloak without singularity
Authors:
Wei Xiang Jiang,
Tie Jun Cui,
Xin Mi Yang,
Qiang Cheng,
Ruopeng Liu,
David R. Smith
Abstract:
An elliptical invisible cloak is proposed using a coordinate transformation in the elliptical-cylindrical coordinate system, which crushes the cloaked object to a line segment instead of a point. The elliptical cloak is reduced to a nearly-circular cloak if the elliptical focus becomes very small. The advantage of the proposed invisibility cloak is that none of the parameters is singular and the…
▽ More
An elliptical invisible cloak is proposed using a coordinate transformation in the elliptical-cylindrical coordinate system, which crushes the cloaked object to a line segment instead of a point. The elliptical cloak is reduced to a nearly-circular cloak if the elliptical focus becomes very small. The advantage of the proposed invisibility cloak is that none of the parameters is singular and the changing range of all parameters is relatively small.
△ Less
Submitted 25 October, 2008; v1 submitted 13 September, 2008;
originally announced September 2008.
-
Spatial dispersion and energy in strong chiral medium
Authors:
Chao Zhang,
Tie Jun Cui
Abstract:
Since the discovery of backward-wave materials, people have tried to realize strong chiral medium, which is traditionally thought impossible mainly for the reason of energy and spatial dispersion. We compare the two most popular descriptions of chiral medium. After analyzing several possible reasons for the traditional restriction, we show that strong chirality parameter leads to positive energy…
▽ More
Since the discovery of backward-wave materials, people have tried to realize strong chiral medium, which is traditionally thought impossible mainly for the reason of energy and spatial dispersion. We compare the two most popular descriptions of chiral medium. After analyzing several possible reasons for the traditional restriction, we show that strong chirality parameter leads to positive energy without any frequency-band limitation in the weak spatial dispersion. Moreover, strong chirality does not result in a strong spatial dispersion, which occurs only around the traditional limit point. For strong spatial dispersion where higher-order terms of spatial dispersion need to be considered, the energy conversation is also valid. Finally, we show that strong chirality need to be realized from the conjugated type of spatial dispersion.
△ Less
Submitted 25 December, 2006;
originally announced December 2006.
-
Negative reflections of electromagnetic waves in chiral media
Authors:
Chao Zhang,
Tie Jun Cui
Abstract:
We investigate the reflection properties of electromagnetic/optical waves in isotropic chiral media. When the chiral parameter is strong enough, we show that an unusual \emph{negative reflection} occurs at the interface of the chiral medium and a perfectly conducting plane, where the incident wave and one of reflected eigenwaves lie in the same side of the boundary normal. Using such a property,…
▽ More
We investigate the reflection properties of electromagnetic/optical waves in isotropic chiral media. When the chiral parameter is strong enough, we show that an unusual \emph{negative reflection} occurs at the interface of the chiral medium and a perfectly conducting plane, where the incident wave and one of reflected eigenwaves lie in the same side of the boundary normal. Using such a property, we further demonstrate that such a conducting plane can be used for focusing in the strong chiral medium. The related equations under paraxial optics approximation are deduced. In a special case of chiral medium, the chiral nihility, one of the bi-reflections disappears and only single reflected eigenwave exists, which goes exactly opposite to the incident wave. Hence the incident and reflected electric fields will cancel each other to yield a zero total electric field. In another word, any electromagnetic waves entering the chiral nihility with perfectly conducting plane will disappear.
△ Less
Submitted 22 October, 2006;
originally announced October 2006.