-
Autonomous Restructuring of Asteroids into Rotating Space Stations
Authors:
David W. Jensen
Abstract:
Asteroid restructuring uses robotics, self replication, and mechanical automatons to autonomously restructure an asteroid into a large rotating space station. The restructuring process makes structures from asteroid oxide materials; uses productive self-replication to make replicators, helpers, and products; and creates a multiple floor station to support a large population. In an example simulati…
▽ More
Asteroid restructuring uses robotics, self replication, and mechanical automatons to autonomously restructure an asteroid into a large rotating space station. The restructuring process makes structures from asteroid oxide materials; uses productive self-replication to make replicators, helpers, and products; and creates a multiple floor station to support a large population. In an example simulation, it takes 12 years to autonomously restructure a large asteroid into the space station. This is accomplished with a single rocket launch. The single payload contains a base station, 4 robots (spiders), and a modest set of supplies. Our simulation creates 3000 spiders and over 23,500 other pieces of equipment. Only the base station and spiders (replicators) have advanced microprocessors and algorithms. These represent 21st century technologies created and trans-ported from Earth. The equipment and tools are built using in-situ materials and represent 18th or 19th century technologies. The equipment and tools (helpers) have simple mechanical programs to perform repetitive tasks. The resulting example station would be a rotating framework almost 5 kilometers in diameter. Once completed, it could support a population of over 700,000 people. Many researchers identify the high launch costs, the harsh space environment, and the lack of gravity as the key obstacles hindering the development of space stations. The single probe addresses the high launch cost. The autonomous construction eliminates the harsh space environment for construction crews. The completed rotating station provides radiation protection and centripetal gravity for the first work crews and colonists.
△ Less
Submitted 27 November, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Comprehensive Energy Balance Analysis of Photon-Enhanced Thermionic Power Generation Considering Concentrated Solar Absorption Distribution
Authors:
A. N. M. Taufiq Elahi,
Mohammad Ghashami,
Devon Jensen,
Keunhan Park
Abstract:
The present article reports a comprehensive energy balance analysis of a photon-enhanced thermionic emission (PETE) device when it is used for concentrated solar power (CSP) generation. To this end, we consider a realistic PETE device composed of a boron-doped silicon emitter on glass and a phosphorus-doped diamond collector on tungsten separated by the inter-electrode vacuum gap. Depth-dependent…
▽ More
The present article reports a comprehensive energy balance analysis of a photon-enhanced thermionic emission (PETE) device when it is used for concentrated solar power (CSP) generation. To this end, we consider a realistic PETE device composed of a boron-doped silicon emitter on glass and a phosphorus-doped diamond collector on tungsten separated by the inter-electrode vacuum gap. Depth-dependent spectral solar absorption and its photovoltaic and photothermal energy conversion processes are rigorously calculated to predict the PETE power output and energy conversion efficiency. Our calculation predicts that when optimized, the power output of the considered PETE device can reach 1.6 W/cm$^2$ with the energy conversion efficiency of $\sim$18 \% for 100$\times$ solar concentration, which is substantially lower than those predicted in previous works under ideal conditions. In addition, the photon-enhancement ratio is lower than 10 and decreases with the increasing solar concentration due to the photothermal heating of the emitter, suggesting that PETE may be an adequate energy conversion process for low-to-medium CSP below $\sim$100$\times$ concentration. These observations signify the importance of a rigorous energy balance analysis based on spectral and spatial solar absorption distribution for the accurate prediction of PETE power generation.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Review of the First Charged-Particle Transport Coefficient Comparison Workshop
Authors:
P. E. Grabowski,
S. B. Hansen,
M. S. Murillo,
L. G. Stanton,
F. R. Graziani,
A. B. Zylstra,
S. D. Baalrud,
P. Arnault,
A. D. Baczewski,
L. X. Benedict,
C. Blancard,
O. Certik,
J. Clerouin,
L. A. Collins,
S. Copeland,
A. A. Correa,
J. Dai,
J. Daligault,
M. P. Desjarlais,
M. W. C. Dharma-wardana,
G. Faussurier,
J. Haack,
T. Haxhimali,
A. Hayes-Sterbenz,
Y. Hou
, et al. (20 additional authors not shown)
Abstract:
We present the results of the first Charged-Particle Transport Coefficient Code Comparison Workshop, which was held in Albuquerque, NM October 4-6, 2016. In this first workshop, scientists from eight institutions and four countries gathered to compare calculations of transport coefficients including thermal and electrical conduction, electron-ion coupling, inter-ion diffusion, ion viscosity, and c…
▽ More
We present the results of the first Charged-Particle Transport Coefficient Code Comparison Workshop, which was held in Albuquerque, NM October 4-6, 2016. In this first workshop, scientists from eight institutions and four countries gathered to compare calculations of transport coefficients including thermal and electrical conduction, electron-ion coupling, inter-ion diffusion, ion viscosity, and charged particle stopping powers. Here, we give general background on Coulomb coupling and computational expense, review where some transport coefficients appear in hydrodynamic equations, and present the submitted data. Large variations are found when either the relevant Coulomb coupling parameter is large or computational expense causes difficulties. Understanding the general accuracy and uncertainty associated with such transport coefficients is important for quantifying errors in hydrodynamic simulations of inertial confinement fusion and high-energy density experiments.
△ Less
Submitted 29 September, 2020; v1 submitted 1 July, 2020;
originally announced July 2020.
-
The Liquid Argon In A Testbeam (LArIAT) Experiment
Authors:
LArIAT Collaboration,
R. Acciarri,
C. J. Adams,
J. Asaadi,
M. Backfish,
W. Badgett,
B. Baller,
O. Benevides Rodrigues,
F. d. M. Blaszczyk,
R. Bouabid,
C. Bromberg,
R. Carey,
R. Castillo Fernandez,
F. Cavanna,
J. I. Cevallos Aleman,
A. Chatterjee,
P. Dedin Neto,
M. V. Dos Santos,
S. Dytman,
D. Edmunds,
M. Elkins,
C. O. Escobar,
J. Esquivel,
J. Evans,
A. Falcone
, et al. (81 additional authors not shown)
Abstract:
The LArIAT liquid argon time projection chamber, placed in a tertiary beam of charged particles at the Fermilab Test Beam Facility, has collected large samples of pions, muons, electrons, protons, and kaons in the momentum range 300-1400 MeV/c. This paper describes the main aspects of the detector and beamline, and also reports on calibrations performed for the detector and beamline components.
The LArIAT liquid argon time projection chamber, placed in a tertiary beam of charged particles at the Fermilab Test Beam Facility, has collected large samples of pions, muons, electrons, protons, and kaons in the momentum range 300-1400 MeV/c. This paper describes the main aspects of the detector and beamline, and also reports on calibrations performed for the detector and beamline components.
△ Less
Submitted 6 February, 2020; v1 submitted 23 November, 2019;
originally announced November 2019.
-
Revisiting Submicron-Gap Thermionic Power Generation Based on Comprehensive Charge and Thermal Transport Modeling
Authors:
Devon Jensen,
Mohammad Ghashami,
Keunhan Park
Abstract:
Over the past years, thermionic energy conversion (TEC) with a reduced inter-electrode vacuum gap has been studied as an effective way to mitigate a large potential barrier due to space charge accumulation. However, existing theoretical models do not fully consider the fundamental aspects of thermionic emission when the inter-electrode gap shrinks to the nanoscale, which results in underestimation…
▽ More
Over the past years, thermionic energy conversion (TEC) with a reduced inter-electrode vacuum gap has been studied as an effective way to mitigate a large potential barrier due to space charge accumulation. However, existing theoretical models do not fully consider the fundamental aspects of thermionic emission when the inter-electrode gap shrinks to the nanoscale, which results in underestimation of thermionic power generation for such small gaps. The present work addresses this challenge by comprehensively modeling charge and thermal transport processes with specific consideration of nanoscale gap effects, such as image charge perturbation, electron tunneling, and near-field thermal radiation. Carefully conducted energy balance analysis reveals that if optimized, submicron-gap TEC can excel the micron-gap counterpart with $\sim$4 times the power output and ~5-10 % higher energy conversion efficiency. Moreover, the high-temperature collector of the submicron-gap TEC, which is due to thermionic and near-field radiative heat transfer, allows the addition of a bottom-cycle heat engine to further enhance the power and efficiency when combined. Electric field concentration due to engineered surface roughness is also examined as a potential approach to produce an additional increase in power generation. We believe that the present work provides a theoretical framework for submicron-gap thermionic power generation as a promising energy recycling scheme for high-quality heat sources.
△ Less
Submitted 13 July, 2019;
originally announced July 2019.
-
Numerical Methods for the Inverse Problem of Density Functional Theory
Authors:
Daniel Jensen,
Adam Wasserman
Abstract:
The inverse problem of Kohn-Sham density functional theory (DFT) is often solved in an effort to benchmark and design approximate exchange-correlation potentials. The forward and inverse problems of DFT rely on the same equations but the numerical methods for solving each problem are substantially different. We examine both problems in this tutorial with a special emphasis on the algorithms and er…
▽ More
The inverse problem of Kohn-Sham density functional theory (DFT) is often solved in an effort to benchmark and design approximate exchange-correlation potentials. The forward and inverse problems of DFT rely on the same equations but the numerical methods for solving each problem are substantially different. We examine both problems in this tutorial with a special emphasis on the algorithms and error analysis needed for solving the inverse problem. Two inversion methods based on partial differential equation constrained optimization and constrained variational ideas are introduced. We compare and contrast several different inversion methods applied to one-dimensional finite and periodic model systems.
△ Less
Submitted 2 June, 2017; v1 submitted 13 March, 2017;
originally announced March 2017.
-
Measurement of the Multiple-Muon Charge Ratio in the MINOS Far Detector
Authors:
Minos Collaboration,
P. Adamson,
I. Anghel,
A. Aurisano,
G. Barr,
M. Bishai,
A. Blake,
G. J. Bock,
D. Bogert,
S. V. Cao,
T. J. Carroll,
C. M. Castromonte,
R. Chen,
S. Childress,
J. A. B. Coelho,
L. Corwin,
D. Cronin-Hennessy,
J. K. de Jong,
S. De Rijck,
A. V. Devan,
N. E. Devenish,
M. V. Diwan,
C. O. Escobar,
J. J. Evans,
E. Falk
, et al. (96 additional authors not shown)
Abstract:
The charge ratio, $R_μ= N_{μ^+}/N_{μ^-}$, for cosmogenic multiple-muon events observed at an under- ground depth of 2070 mwe has been measured using the magnetized MINOS Far Detector. The multiple-muon events, recorded nearly continuously from August 2003 until April 2012, comprise two independent data sets imaged with opposite magnetic field polarities, the comparison of which allows the systemat…
▽ More
The charge ratio, $R_μ= N_{μ^+}/N_{μ^-}$, for cosmogenic multiple-muon events observed at an under- ground depth of 2070 mwe has been measured using the magnetized MINOS Far Detector. The multiple-muon events, recorded nearly continuously from August 2003 until April 2012, comprise two independent data sets imaged with opposite magnetic field polarities, the comparison of which allows the systematic uncertainties of the measurement to be minimized. The multiple-muon charge ratio is determined to be $R_μ= 1.104 \pm 0.006 {\rm \,(stat.)} ^{+0.009}_{-0.010} {\rm \,(syst.)} $. This measurement complements previous determinations of single-muon and multiple-muon charge ratios at underground sites and serves to constrain models of cosmic ray interactions at TeV energies.
△ Less
Submitted 24 March, 2016; v1 submitted 1 February, 2016;
originally announced February 2016.
-
First measurement of muon-neutrino disappearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68%…
▽ More
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68% confidence level, with two statistically-degenerate best fit points at $\sin^2θ_{23} = $ 0.43 and 0.60. Results for the inverted mass hierarchy are also presented.
△ Less
Submitted 20 January, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
First measurement of electron neutrino appearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. S. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a backg…
▽ More
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a background of $1.07\pm0.14$ (syst.). The $3.3σ$ excess of events observed in the primary analysis disfavors $0.1π< δ_{CP} < 0.5π$ in the inverted mass hierarchy at the 90% C.L.
△ Less
Submitted 2 May, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
The NuMI Neutrino Beam
Authors:
P. Adamson,
K. Anderson,
M. Andrews,
R. Andrews,
I. Anghel,
D. Augustine,
A. Aurisano,
S. Avvakumov,
D. S. Ayres,
B. Baller,
B. Barish,
G. Barr,
W. L. Barrett,
R. H. Bernstein,
J. Biggs,
M. Bishai,
A. Blake,
V. Bocean,
G. J. Bock,
D. J. Boehnlein,
D. Bogert,
K. Bourkland,
S. V. Cao,
C. M. Castromonte,
S. Childress
, et al. (165 additional authors not shown)
Abstract:
This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance,…
▽ More
This paper describes the hardware and operations of the Neutrinos at the Main Injector (NuMI) beam at Fermilab. It elaborates on the design considerations for the beam as a whole and for individual elements. The most important design details of individual components are described. Beam monitoring systems and procedures, including the tuning and alignment of the beam and NuMI long-term performance, are also discussed.
△ Less
Submitted 29 July, 2015; v1 submitted 23 July, 2015;
originally announced July 2015.
-
Precision measurement of the speed of propagation of neutrinos using the MINOS detectors
Authors:
P. Adamson,
I. Anghel,
N. Ashby,
A. Aurisano,
G. Barr,
M. Bishai,
A. Blake,
G. J. Bock,
D. Bogert,
R. Bumgarner,
S. V. Cao,
C. M. Castromonte,
S. Childress,
J. A. B. Coelho,
L. Corwin,
D. Cronin-Hennessy,
J. K. de Jong,
A. V. Devan,
N. E. Devenish,
M. V. Diwan,
C. O. Escobar,
J. J. Evans,
E. Falk,
G. J. Feldman,
B. Fonville
, et al. (98 additional authors not shown)
Abstract:
We report a two-detector measurement of the propagation speed of neutrinos over a baseline of 734 km. The measurement was made with the NuMI beam at Fermilab between the near and far MINOS detectors. The fractional difference between the neutrino speed and the speed of light is determined to be $(v/c-1) = (1.0 \pm 1.1) \times 10^{-6}$, consistent with relativistic neutrinos.
We report a two-detector measurement of the propagation speed of neutrinos over a baseline of 734 km. The measurement was made with the NuMI beam at Fermilab between the near and far MINOS detectors. The fractional difference between the neutrino speed and the speed of light is determined to be $(v/c-1) = (1.0 \pm 1.1) \times 10^{-6}$, consistent with relativistic neutrinos.
△ Less
Submitted 21 August, 2015; v1 submitted 15 July, 2015;
originally announced July 2015.
-
Refining the Semantics of Social Influence
Authors:
Katerina Marazopoulou,
David Arbour,
David Jensen
Abstract:
With the proliferation of network data, researchers are increasingly focusing on questions investigating phenomena occurring on networks. This often includes analysis of peer-effects, i.e., how the connections of an individual affect that individual's behavior. This type of influence is not limited to direct connections of an individual (such as friends), but also to individuals that are connected…
▽ More
With the proliferation of network data, researchers are increasingly focusing on questions investigating phenomena occurring on networks. This often includes analysis of peer-effects, i.e., how the connections of an individual affect that individual's behavior. This type of influence is not limited to direct connections of an individual (such as friends), but also to individuals that are connected through longer paths (for example, friends of friends, or friends of friends of friends). In this work, we identify an ambiguity in the definition of what constitutes the extended neighborhood of an individual. This ambiguity gives rise to different semantics and supports different types of underlying phenomena. We present experimental results, both on synthetic and real networks, that quantify differences among the sets of extended neighbors under different semantics. Finally, we provide experimental evidence that demonstrates how the use of different semantics affects model selection.
△ Less
Submitted 16 December, 2014;
originally announced December 2014.
-
Observation of muon intensity variations by season with the MINOS Near Detector
Authors:
P. Adamson,
I. Anghel,
A. Aurisano,
G. Barr,
M. Bishai,
A. Blake,
G. J. Bock,
D. Bogert,
S. V. Cao,
C. M. Castromonte,
S. Childress,
J. A. B. Coelho,
L. Corwin,
D. Cronin-Hennessy,
J. K. de Jong,
A. V. Devan,
N. E. Devenish,
M. V. Diwan,
C. O. Escobar,
J. J. Evans,
E. Falk,
G. J. Feldman,
T. H. Fields,
M. V. Frohne,
H. R. Gallagher
, et al. (87 additional authors not shown)
Abstract:
A sample of 1.53$\times$10$^{9}$ cosmic-ray-induced single muon events has been recorded at 225 meters-water-equivalent using the MINOS Near Detector. The underground muon rate is observed to be highly correlated with the effective atmospheric temperature. The coefficient $α_{T}$, relating the change in the muon rate to the change in the vertical effective temperature, is determined to be 0.428…
▽ More
A sample of 1.53$\times$10$^{9}$ cosmic-ray-induced single muon events has been recorded at 225 meters-water-equivalent using the MINOS Near Detector. The underground muon rate is observed to be highly correlated with the effective atmospheric temperature. The coefficient $α_{T}$, relating the change in the muon rate to the change in the vertical effective temperature, is determined to be 0.428$\pm$0.003(stat.)$\pm$0.059(syst.). An alternative description is provided by the weighted effective temperature, introduced to account for the differences in the temperature profile and muon flux as a function of zenith angle. Using the latter estimation of temperature, the coefficient is determined to be 0.352$\pm$0.003(stat.)$\pm$0.046(syst.).
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
LArIAT: Liquid Argon In A Testbeam
Authors:
J. Paley,
D. Gastler,
E. Kearns,
R. Linehan,
R. Patterson,
W. Foremen,
J. Ho,
D. Schmitz,
R. Johnson,
J. St. John,
R. Acciarri,
P. Adamson,
M. Backfish,
W. Badgett,
B. Baller,
A. Hahn,
D. Jensen,
T. Junk,
M. Kirby,
T. Kobilarcik,
P. Kryczynski,
H. Lippincott,
A. Marchionni,
K. Nishikawa,
J. Raaf
, et al. (42 additional authors not shown)
Abstract:
Liquid Argon Time Projection Chambers (LArTPCs) are ideal detectors for precision neutrino physics. These detectors, when located deep underground, can also be used for measurements of proton decay, and astrophysical neutrinos. The technology must be completely developed, up to very large mass scales, and fully mastered to construct and operate these detectors for this physics program. As part of…
▽ More
Liquid Argon Time Projection Chambers (LArTPCs) are ideal detectors for precision neutrino physics. These detectors, when located deep underground, can also be used for measurements of proton decay, and astrophysical neutrinos. The technology must be completely developed, up to very large mass scales, and fully mastered to construct and operate these detectors for this physics program. As part of an integrated plan of developing these detectors, accurate measurements in LArTPC of known particle species in the relevant energy ranges are now deemed as necessary. The LArIAT program aims to directly achieve these goals by deploying LArTPC detectors in a dedicated calibration test beam line at Fermilab. The set of measurements envisaged here are significant for both the short-baseline (SBN) and long-baseline (LBN) neutrino oscillation programs in the US, starting with MicroBooNE in the near term and with the adjoint near and far liquid argon detectors in the Booster beam line at Fermilab envisioned in the mid-term, and moving towards deep underground physics such as with the long-baseline neutrino facility (LBNF) in the longer term.
△ Less
Submitted 27 June, 2014; v1 submitted 20 June, 2014;
originally announced June 2014.
-
Learning to Generate Networks
Authors:
James Atwood,
Don Towsley,
Krista Gile,
David Jensen
Abstract:
We investigate the problem of learning to generate complex networks from data. Specifically, we consider whether deep belief networks, dependency networks, and members of the exponential random graph family can learn to generate networks whose complex behavior is consistent with a set of input examples. We find that the deep model is able to capture the complex behavior of small networks, but that…
▽ More
We investigate the problem of learning to generate complex networks from data. Specifically, we consider whether deep belief networks, dependency networks, and members of the exponential random graph family can learn to generate networks whose complex behavior is consistent with a set of input examples. We find that the deep model is able to capture the complex behavior of small networks, but that no model is able capture this behavior for networks with more than a handful of nodes.
△ Less
Submitted 10 November, 2014; v1 submitted 22 May, 2014;
originally announced May 2014.
-
Online Dating Recommendations: Matching Markets and Learning Preferences
Authors:
Kun Tu,
Bruno Ribeiro,
Hua Jiang,
Xiaodong Wang,
David Jensen,
Benyuan Liu,
Don Towsley
Abstract:
Recommendation systems for online dating have recently attracted much attention from the research community. In this paper we proposed a two-side matching framework for online dating recommendations and design an LDA model to learn the user preferences from the observed user messaging behavior and user profile features. Experimental results using data from a large online dating website shows that…
▽ More
Recommendation systems for online dating have recently attracted much attention from the research community. In this paper we proposed a two-side matching framework for online dating recommendations and design an LDA model to learn the user preferences from the observed user messaging behavior and user profile features. Experimental results using data from a large online dating website shows that two-sided matching improves significantly the rate of successful matches by as much as 45%. Finally, using simulated matchings we show that the the LDA model can correctly capture user preferences.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Fragment-based Time-dependent Density-functional Theory
Authors:
Martin A. Mosquera,
Daniel Jensen,
Adam Wasserman
Abstract:
Using the Runge-Gross theorem that establishes the foundation of Time-dependent Density Functional Theory (TDDFT) we prove that for a given electronic Hamiltonian, choice of initial state, and choice of fragmentation, there is a unique single-particle potential (dubbed time-dependent partition potential) which, when added to each of the pre-selected fragment potentials, forces the fragment densiti…
▽ More
Using the Runge-Gross theorem that establishes the foundation of Time-dependent Density Functional Theory (TDDFT) we prove that for a given electronic Hamiltonian, choice of initial state, and choice of fragmentation, there is a unique single-particle potential (dubbed time-dependent partition potential) which, when added to each of the pre-selected fragment potentials, forces the fragment densities to evolve in such a way that their sum equals the exact molecular density at all times. This uniqueness theorem suggests new ways of computing time-dependent properties of electronic systems via fragment-TDDFT calculations. We derive a formally exact relationship between the partition potential and the total density, and illustrate our approach on a simple model system for binary fragmentation in a laser field.
△ Less
Submitted 25 March, 2013;
originally announced March 2013.
-
Neutron energy spectrum from 120 GeV protons on a thick copper target
Authors:
Nobuhiro Shigyo,
Toshiya Sanami,
Tsuyoshi Kajimoto,
Yosuke Iwamoto,
Masayuki Hagiwara,
Kiwamu Saito,
Kenji Ishibashi,
Hiroshi Nakashima,
Yukio Sakamoto,
Hee-Seock Lee,
Erik Ramberg,
Aria A. Meyhoefer,
Rick Coleman,
Doug Jensen,
Anthony F. Leveling,
David J. Boehnlein,
Nikolai V. Mokhov
Abstract:
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high e…
▽ More
Neutron energy spectrum from 120 GeV protons on a thick copper target was measured at the Meson Test Beam Facility (MTBF) at Fermi National Accelerator Laboratory. The data allows for evaluation of neutron production process implemented in theoretical simulation codes. It also helps exploring the reasons for some disagreement between calculation results and shielding benchmark data taken at high energy accelerator facilities, since it is evaluated separately from neutron transport. The experiment was carried out using a 120 GeV proton beam of 3E5 protons/spill. Since the spill duration was 4 seconds, proton-induced events were counted pulse by pulse. The intensity was maintained using diffusers and collimators installed in the beam line to MTBF. The protons hit a copper block target the size of which is 5cm x 5cm x 60 cm long. The neutrons produced in the target were measured using NE213 liquid scintillator detectors, placed about 5.5 m away from the target at 30^{\circ} and 5 m 90^{\circ} with respect to the proton beam axis. The neutron energy was determined by time-of-flight technique using timing difference between the NE213 and a plastic scintillator located just before the target. Neutron detection efficiency of NE213 was determined on basis of experimental data from the high energy neutron beam line at Los Alamos National Laboratory. The neutron spectrum was compared with the results of multi-particle transport codes to validate the implemented theoretical models. The apparatus would be applied to future measurements to obtain a systematic data set for secondary particle production on various target materials.
△ Less
Submitted 7 February, 2012;
originally announced February 2012.
-
BeamLine Design for MINERvA TestBeam Detector
Authors:
C. E. Pérez,
A. M. Gago,
J. Morfin,
D. A. Jensen,
R. Gran
Abstract:
The MINER$ν$A TestBeam Detector calibrations will take place in the MTEST facility at Fermilab. It will use a beam of hadrons between 300 and 1500 MeV/c to analyze the response of the MINERvA detector components. The aim of the present work is to design the beam while considering radiation hazards at the hall. To accomplish this, we are using a Monte Carlo simulation based on Geant4 and actual d…
▽ More
The MINER$ν$A TestBeam Detector calibrations will take place in the MTEST facility at Fermilab. It will use a beam of hadrons between 300 and 1500 MeV/c to analyze the response of the MINERvA detector components. The aim of the present work is to design the beam while considering radiation hazards at the hall. To accomplish this, we are using a Monte Carlo simulation based on Geant4 and actual data taken from measurements of the elements that make up the beamline.
△ Less
Submitted 1 August, 2008;
originally announced August 2008.
-
Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory
Authors:
M. Sullivan,
G. Bowden,
S. Ecklund,
D. Jensen,
M. Nordby,
A. Ringwall,
Z. R. Wolf
Abstract:
We describe the construction of a prototype hybrid permanent magnet dipole and quadruple. The magnet consists of two concentric rings of SmCo magnetic material 5 cm in length. The outer ring is made of 16 uniformly magnetized blocks assembled as a Halbach dipole and the inner ring has 32 blocks oriented in a similar fashion so as to generate a quadruple field. The resultant superimposed field is…
▽ More
We describe the construction of a prototype hybrid permanent magnet dipole and quadruple. The magnet consists of two concentric rings of SmCo magnetic material 5 cm in length. The outer ring is made of 16 uniformly magnetized blocks assembled as a Halbach dipole and the inner ring has 32 blocks oriented in a similar fashion so as to generate a quadruple field. The resultant superimposed field is an offset quadruple field which allows us to center the field on the high-energy beam in the interaction region of the PEPII B factory. The dipole blocks are glued to the inside surface of an outer support collar and the quadruple blocks are held in a fixture that allows radial adjustment of the blocks prior to potting the entire assembly with epoxy. An extensive computer model of the magnet has been made and from this model we developed a tuning algorithm that allowed us to greatly reduce the n=3-17 harmonics of the magnet.
△ Less
Submitted 30 October, 2001;
originally announced October 2001.