-
Reinforcement Learning Optimizes Power Dispatch in Decentralized Power Grid
Authors:
Yongsun Lee,
Hoyun Choi,
Laurent Pagnier,
Cook Hyun Kim,
Jongshin Lee,
Bukyoung Jhun,
Heetae Kim,
Juergen Kurths,
B. Kahng
Abstract:
Effective frequency control in power grids has become increasingly important with the increasing demand for renewable energy sources. Here, we propose a novel strategy for resolving this challenge using graph convolutional proximal policy optimization (GC-PPO). The GC-PPO method can optimally determine how much power individual buses dispatch to reduce frequency fluctuations across a power grid. W…
▽ More
Effective frequency control in power grids has become increasingly important with the increasing demand for renewable energy sources. Here, we propose a novel strategy for resolving this challenge using graph convolutional proximal policy optimization (GC-PPO). The GC-PPO method can optimally determine how much power individual buses dispatch to reduce frequency fluctuations across a power grid. We demonstrate its efficacy in controlling disturbances by applying the GC-PPO to the power grid of the UK. The performance of GC-PPO is outstanding compared to the classical methods. This result highlights the promising role of GC-PPO in enhancing the stability and reliability of power systems by switching lines or decentralizing grid topology.
△ Less
Submitted 21 July, 2024;
originally announced July 2024.
-
Restoring Original Signal From Pile-up Signal using Deep Learning
Authors:
C. H. Kim,
S. Ahn,
K. Y. Chae,
J. Hooker,
G. V. Rogachev
Abstract:
Pile-up signals are frequently produced in experimental physics. They create inaccurate physics data with high uncertainty and cause various problems. Therefore, the correction to pile-up signals is crucially required. In this study, we implemented a deep learning method to restore the original signals from the pile-up signals. We showed that a deep learning model could accurately reconstruct the…
▽ More
Pile-up signals are frequently produced in experimental physics. They create inaccurate physics data with high uncertainty and cause various problems. Therefore, the correction to pile-up signals is crucially required. In this study, we implemented a deep learning method to restore the original signals from the pile-up signals. We showed that a deep learning model could accurately reconstruct the original signal waveforms from the pile-up waveforms. By substituting the pile-up signals with the original signals predicted by the model, the energy and timing resolutions of the data are notably enhanced. The model implementation significantly improved the quality of the particle identification plot and particle tracks. This method is applicable to similar problems, such as separating multiple signals or correcting pile-up signals with other types of noises and backgrounds.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Classification of magnetic order from electronic structure by using machine learning
Authors:
Yerin Jang,
Choong H. Kim,
Ara Go
Abstract:
Identifying the magnetic state of materials is of great interest in a wide range of applications, but direct identification is not always straightforward due to limitations in neutron scattering experiments. In this work, we present a machine-learning approach using decision-tree algorithms to identify magnetism from the spin-integrated excitation spectrum, such as the density of states. The datas…
▽ More
Identifying the magnetic state of materials is of great interest in a wide range of applications, but direct identification is not always straightforward due to limitations in neutron scattering experiments. In this work, we present a machine-learning approach using decision-tree algorithms to identify magnetism from the spin-integrated excitation spectrum, such as the density of states. The dataset was generated by Hartree-Fock mean-field calculations of candidate antiferromagnetic orders on a Wannier Hamiltonian, extracted from first-principle calculations targeting BaOsO$_3$. Our machine learning model was trained using various types of spectral data, including local density of states, momentum-resolved density of states at high-symmetry points, and the lowest excitation energies from the Fermi level. Although the density of states shows good performance for machine learning, the broadening method had a significant impact on the model's performance. We improved the model's performance by designing the excitation energy as a feature for machine learning, resulting in excellent classification of antiferromagnetic order, even for test samples generated by different methods from the training samples used for machine learning.
△ Less
Submitted 22 August, 2023; v1 submitted 26 February, 2023;
originally announced February 2023.
-
Prediction and mitigation of nonlocal cascading failures using graph neural networks
Authors:
Bukyoung Jhun,
Hoyun Choi,
Yongsun Lee,
Jongshin Lee,
Cook Hyun Kim,
B. Kahng
Abstract:
Cascading failures (CFs) in electrical power grids propagate nonlocally; After a local disturbance, the second failure may be distant. To study the avalanche dynamics and mitigation strategy of nonlocal CFs, numerical simulation is necessary; however, computational complexity is high. Here, we first propose an avalanche centrality (AC) of each node, a measure related to avalanche size, based on th…
▽ More
Cascading failures (CFs) in electrical power grids propagate nonlocally; After a local disturbance, the second failure may be distant. To study the avalanche dynamics and mitigation strategy of nonlocal CFs, numerical simulation is necessary; however, computational complexity is high. Here, we first propose an avalanche centrality (AC) of each node, a measure related to avalanche size, based on the Motter and Lai model. Second, we train a graph neural network (GNN) with the AC in small networks. Next, the trained GNN predicts the AC ranking in much larger networks and real-world electrical grids. This result can be used effectively for avalanche mitigation. The framework we develop can be implemented in other complex processes that are computationally costly to simulate in large networks.
△ Less
Submitted 29 July, 2022;
originally announced August 2022.
-
Validation of e$^+$e$^-$ Pair Production Total Cross Sections for Monte Carlo Particle Transport
Authors:
Tulio Basaglia,
Marcia Begalli,
Chansoo Choi,
Min Cheol Han,
Gabriela Hoff,
Chan Hyeong Kim,
Maria Grazia Pia,
Paolo Saracco
Abstract:
Several sources of total cross sections for e$^+$e$^-$ pair production by photon interaction with matter, used by major Monte Carlo codes for particle transport, are quantitatively evaluated with respect to experimental measurements collected from the literature. They include data libraries deriving from theoretical calculations and analytical formulae representing empirical fits to tabulations. A…
▽ More
Several sources of total cross sections for e$^+$e$^-$ pair production by photon interaction with matter, used by major Monte Carlo codes for particle transport, are quantitatively evaluated with respect to experimental measurements collected from the literature. They include data libraries deriving from theoretical calculations and analytical formulae representing empirical fits to tabulations. Although most of these sources of cross sections are based on one theoretical reference, the statistical data analysis documented in the paper highlights differences in their compatibility with experiment. The cross sections collected in the 1997 version of the Evaluated Photon Data Library (EPDL) exhibit the lowest incompatibility with experiment; the paper details the validation results for all the examined cross section sources. The scarcity of experimental data does not allow the validation process to discern pair production in the field of the nucleus and in the field of atomic electrons; nevertheless, the paper documents relevant clues regarding the contribution of the latter to reproduce experimental measurements.
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Link overlap influences opinion dynamics on multiplex networks: spin model approach
Authors:
Cook Hyun Kim,
Minjae Jo,
J. S. Lee,
G. Bianconi,
B. Kahng
Abstract:
Consider a multiplex network formed by two layers indicating social interactions: the first layer is a friendship network and the second layer is a network of business relations. In this duplex network each pair of individuals can be connected in different ways: they can be connected by a friendship but not connected by a business relation, they can be connected by a business relation without bein…
▽ More
Consider a multiplex network formed by two layers indicating social interactions: the first layer is a friendship network and the second layer is a network of business relations. In this duplex network each pair of individuals can be connected in different ways: they can be connected by a friendship but not connected by a business relation, they can be connected by a business relation without being friends, or they can be simultaneously friends and in a business relation. In the latter case we say that the links in different layers overlap. These three types of connections are called multilinks and the multidegree indicates the sum of multilinks of a given type that are incident to a given node. Previous models of opinion formation on multilayer networks have mostly neglected the effect of link overlap. Here we show that link overlap can have important effects in opinion formation. Indeed, emerging pattern of opinion formation can be significantly influenced by the statistical properties of multilinks, and in particular by the multidegree distribution. To quantitatively address this problem, we study a simple spin model, called the Ashkin-Teller model including 2-body and 4-body interactions between nodes in different layers. Here we fully investigate the rich phase diagram of this model which includes a large variety of phase transitions (PTs). Indeed the phase digram or the model displays continuous, discontinuous, successive discontinuous, and hybrid PTs.
△ Less
Submitted 24 November, 2021; v1 submitted 25 June, 2021;
originally announced June 2021.
-
A Silicon Beam Tracker
Authors:
J. H. Han,
H. S. Ahn,
J. B. Bae,
H. J. Hyun,
S. W. Jung,
D. H. Kah,
C. H. Kim,
H. J. Kim,
K. C. Kim,
M. H. Lee,
L. Lutz,
A. Malinin,
H. Park,
S. Ryu,
E. S. Seo,
P. Walpole,
J. Wu,
J. H. Yoo,
Y. S. Yoon,
S. Y. Zinn
Abstract:
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calori…
▽ More
When testing and calibrating particle detectors in a test beam, accurate tracking information independent of the detector being tested is extremely useful during the offline analysis of the data. A general-purpose Silicon Beam Tracker (SBT) was constructed with an active area of 32.0 x 32.0 mm2 to provide this capability for the beam calibration of the Cosmic Ray Energetics And Mass (CREAM) calorimeter. The tracker consists of two modules, each comprised of two orthogonal layers of 380 μm thick silicon strip sensors. In one module each layer is a 64-channel AC-coupled single-sided silicon strip detector (SSD) with a 0.5 mm pitch. In the other, each layer is a 32-channel DC-coupled single-sided SSD with a 1.0 mm pitch. The signals from the 4 layers are read out using modified CREAM hodoscope front-end electronics with a USB 2.0 interface board to a Linux DAQ PC. In this paper, we present the construction of the SBT, along with its performance in radioactive source tests and in a CERN beam test in October 2006.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Development of Slow Control Package for the Belle II Calorimeter Trigger System
Authors:
C. H. Kim,
S. H. Kim,
I. S. Lee,
H. E Cho,
Y. J. Kim,
J. K. Ahn,
E. J. Jang,
S. K. Choi,
Y. Unno,
B. G. Cheon
Abstract:
The Belle II experiment at the SuperKEKB e+e- collider in KEK, Japan does start physics data-taking from early of 2018 with primary physics goal that is to probe the New Physics effect using heavy quark and lepton weak decays. During trigger and DAQ operation upon beam collision, it is important that Belle II detector (Fig. 1) status have to be monitored in a process of data-taking against an unex…
▽ More
The Belle II experiment at the SuperKEKB e+e- collider in KEK, Japan does start physics data-taking from early of 2018 with primary physics goal that is to probe the New Physics effect using heavy quark and lepton weak decays. During trigger and DAQ operation upon beam collision, it is important that Belle II detector (Fig. 1) status have to be monitored in a process of data-taking against an unexpected situation. Slow control system, built in the Control System Studio (CSS) which is a GUI window design tool based on Eclipse, is one of monitoring and controlling systems in Belle II operation. Database and archiver servers are connected to slow control system. Experimental parameters are downloaded to Belle II main database server which is based on PostgreSQL. Real-time results are stored in archiver server which is based on EPICS (The Experimental Physics and Industrial Control System) archiver appliances and tomcat which is open-source java servlet container. In this study, we report the development of slow control system for the Belle II electromagnetic calorimeter (ECL) trigger system.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Progress on the Electromagnetic Calorimeter Trigger Simulation at the Belle II Experiment
Authors:
I. S. Lee,
S. H. Kim,
C. H. Kim,
H. E Cho,
Y. J. Kim,
J. K. Ahn,
E. J. Jang,
S. K. Choi,
Y. Unno,
B. G. Cheon
Abstract:
The Belle II experiment at KEK in Japan has started real data taking from April 2018 to probe a New Physics beyond the Standard Model by measuring CP violation precisely and rare weak decays of heavy quark and lepton. The experiment is performed at the high luminosity SuperKEKB e^+ e^- collider with 80 x 10^34 cm^-2 s^-1 as an ultimate instantaneous luminosity. In order to develop and test an appr…
▽ More
The Belle II experiment at KEK in Japan has started real data taking from April 2018 to probe a New Physics beyond the Standard Model by measuring CP violation precisely and rare weak decays of heavy quark and lepton. The experiment is performed at the high luminosity SuperKEKB e^+ e^- collider with 80 x 10^34 cm^-2 s^-1 as an ultimate instantaneous luminosity. In order to develop and test an appropriate trigger algorithm under much higher luminosity and beam background environment than previous KEKB collider, a detail simulation study of the Belle II calorimeter trigger system is very crucial to operate Belle II Trigger and DAQ system in stable. We report preliminary results on various trigger logics and their efficiencies using physics and beam background Monte Carlo events with a Belle II Geant4-based analysis framework called Basf2.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Quantitative Test of the Evolution of Geant4 Electron Backscattering Simulation
Authors:
Tullio Basaglia,
Min Cheol Han,
Gabriela Hoff,
Chan Hyeong Kim,
Sung Hun Kim,
Maria Grazia Pia,
Paolo Saracco
Abstract:
Evolutions of Geant4 code have affected the simulation of electron backscattering with respect to previously published results. Their effects are quantified by analyzing the compatibility of the simulated electron backscattering fraction with a large collection of experimental data for a wide set of physics configuration options available in Geant4. Special emphasis is placed on two electron scatt…
▽ More
Evolutions of Geant4 code have affected the simulation of electron backscattering with respect to previously published results. Their effects are quantified by analyzing the compatibility of the simulated electron backscattering fraction with a large collection of experimental data for a wide set of physics configuration options available in Geant4. Special emphasis is placed on two electron scattering implementations first released in Geant4 version 10.2: the Goudsmit-Saunderson multiple scattering model and a single Coulomb scattering model based on Mott cross section calculation. The new Goudsmit-Saunderson multiple scattering model appears to perform equally or less accurately than the model implemented in previous Geant4 versions, depending on the electron energy. The new Coulomb scattering model was flawed from a physics point of view, but computationally fast in Geant4 version 10.2; the physics correction released in Geant4 version 10.2p01 severely degrades its computational performance. Evolutions in the Geant4 geometry domain have addressed physics problems observed in electron backscattering simulation in previous publications.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Optimizing spectral distribution character of the LEDs to decrease discoloring of the collections in museum
Authors:
Chang Ho Kim,
Hong Wei Liang,
Sung Hyok Han,
Ju Yong Kim,
Ki Won Ryang,
Chol Kim
Abstract:
For white LEDs used for lighting museums, it is possible to reduce their effects on the discoloration of exhibits to a great extent by regulating their spectral distribution so that less lights with 420~470 nm of wavelength which acts on increasing the span of preservation of exhibits, such as pictures, color paper and color cloth. For same illumination of radiation of 5000 lx of white LEDs with d…
▽ More
For white LEDs used for lighting museums, it is possible to reduce their effects on the discoloration of exhibits to a great extent by regulating their spectral distribution so that less lights with 420~470 nm of wavelength which acts on increasing the span of preservation of exhibits, such as pictures, color paper and color cloth. For same illumination of radiation of 5000 lx of white LEDs with different color temperature of about 3000, 3200, 4200 and 6500 K, the density of radiation energy of 420 nm was 34.2, 71.8, 83.1 and 268.3 μW/cm2, respectively. The discoloration experiment shows that the effects of discoloration of cold white LEDs was much greater than those of warm white LEDs.
△ Less
Submitted 27 September, 2016; v1 submitted 29 March, 2016;
originally announced April 2016.
-
Validation of cross sections for Monte Carlo simulation of the photoelectric effect
Authors:
Min Cheol Han,
Han Sung Kim,
Maria Grazia Pia,
Tullio Basaglia,
Matej Batic,
Gabriela Hoff,
Chan Hyeong Kim,
Paolo Saracco
Abstract:
Several total and partial photoionization cross section calculations, based on both theoretical and empirical approaches, are quantitatively evaluated with statistical analyses using a large collection of experimental data retrieved from the literature to identify the state of the art for modeling the photoelectric effect in Monte Carlo particle transport. Some of the examined cross section models…
▽ More
Several total and partial photoionization cross section calculations, based on both theoretical and empirical approaches, are quantitatively evaluated with statistical analyses using a large collection of experimental data retrieved from the literature to identify the state of the art for modeling the photoelectric effect in Monte Carlo particle transport. Some of the examined cross section models are available in general purpose Monte Carlo systems, while others have been implemented and subjected to validation tests for the first time to estimate whether they could improve the accuracy of particle transport codes. The validation process identifies Scofield's 1973 non-relativistic calculations, tabulated in the Evaluated Photon Data Library(EPDL), as the one best reproducing experimental measurements of total cross sections. Specialized total cross section models, some of which derive from more recent calculations, do not provide significant improvements. Scofield's non-relativistic calculations are not surpassed regarding the compatibility with experiment of K and L shell photoionization cross sections either, although in a few test cases Ebel's parameterization produces more accurate results close to absorption edges. Modifications to Biggs and Lighthill's parameterization implemented in Geant4 significantly reduce the accuracy of total cross sections at low energies with respect to its original formulation. The scarcity of suitable experimental data hinders a similar extensive analysis for the simulation of the photoelectron angular distribution, which is limited to a qualitative appraisal.
△ Less
Submitted 25 January, 2016;
originally announced January 2016.
-
Practical biological spread-out Bragg peak design of carbon beam
Authors:
Chang Hyeuk Kim,
Hwa-Ryun Lee,
Seduk Chang,
Hong Suk Jang,
Jeong Hwan Kim,
Dong Wook Park,
Won Taek Hwang,
Tea-Keun Yang
Abstract:
The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Ge…
▽ More
The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Geant4 based Monte Carlo simulation code. The various Bragg peak profiles and LET was calculated for each slice at the target region. To generate appropriate biological SOBP, a set of weighting factor, which is a power function in terms of energy step, was applied to the obtained each physical dose. The designed biological SOBP showed 1.34 % of uniformity.
△ Less
Submitted 16 July, 2015;
originally announced July 2015.
-
Investigation of Geant4 Simulation of Electron Backscattering
Authors:
Tullio Basaglia,
Min Cheol Han,
Gabriela Hoff,
Chan Hyeong Kim,
Sung Hun Kim,
Maria Grazia Pia,
Paolo Saracco
Abstract:
A test of Geant4 simulation of electron backscattering recently published in this journal prompted further investigation into the causes of the observed behaviour. An interplay between features of geometry and physics algorithms implemented in Geant4 is found to significantly affect the accuracy of backscattering simulation in some physics configurations.
A test of Geant4 simulation of electron backscattering recently published in this journal prompted further investigation into the causes of the observed behaviour. An interplay between features of geometry and physics algorithms implemented in Geant4 is found to significantly affect the accuracy of backscattering simulation in some physics configurations.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Validation Test of Geant4 Simulation of Electron Backscattering
Authors:
Sung Hun Kim,
Maria Grazia Pia,
Tullio Basaglia,
Min Cheol Han,
Gabriela Hoff,
Chan Hyeong Kim,
Paolo Saracco
Abstract:
Backscattering is a sensitive probe of the accuracy of electron scattering algorithms implemented in Monte Carlo codes. The capability of the Geant4 toolkit to describe realistically the fraction of electrons backscattered from a target volume is extensively and quantitatively evaluated in comparison with experimental data retrieved from the literature. The validation test covers the energy range…
▽ More
Backscattering is a sensitive probe of the accuracy of electron scattering algorithms implemented in Monte Carlo codes. The capability of the Geant4 toolkit to describe realistically the fraction of electrons backscattered from a target volume is extensively and quantitatively evaluated in comparison with experimental data retrieved from the literature. The validation test covers the energy range between approximately 100 eV and 20 MeV, and concerns a wide set of target elements. Multiple and single electron scattering models implemented in Geant4, as well as preassembled selections of physics models distributed within Geant4, are analyzed with statistical methods. The evaluations concern Geant4 versions from 9.1 to 10.1. Significant evolutions are observed over the range of Geant4 versions, not always in the direction of better compatibility with experiment. Goodness-of-fit tests complemented by categorical analysis tests identify a configuration based on Geant4 Urban multiple scattering model in Geant4 version 9.1 and a configuration based on single Coulomb scattering in Geant4 10.0 as the physics options best reproducing experimental data above a few tens of keV. At lower energies only single scattering demonstrates some capability to reproduce data down to a few keV. Recommended preassembled physics configurations appear incapable of describing electron backscattering compatible with experiment. With the support of statistical methods, a correlation is established between the validation of Geant4-based simulation of backscattering and of energy deposition.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Geant4 and beyond: recent progress in precision physics modeling
Authors:
Matej Batic,
Marcia Begalli,
Min Cheol Han,
Steffen Hauf,
Gabriela Hoff,
Chan Hyeong Kim,
Han Sung Kim,
Sung Hun Kim,
Markus Kuster,
Maria Grazia Pia,
Paolo Saracco,
Georg Weidenspointner
Abstract:
This extended abstract briefly summarizes ongoing research activity on the evaluation and experimental validation of physics methods for photon and electron transport. The analysis includes physics models currently implemented in Geant4 as well as modeling methods used in other Monte Carlo codes, or not yet considered in general purpose Monte Carlo simulation systems. The validation of simulation…
▽ More
This extended abstract briefly summarizes ongoing research activity on the evaluation and experimental validation of physics methods for photon and electron transport. The analysis includes physics models currently implemented in Geant4 as well as modeling methods used in other Monte Carlo codes, or not yet considered in general purpose Monte Carlo simulation systems. The validation of simulation models is performed with the support of rigorous statistical methods, which involve goodness-of-fit tests followed by categorical analysis. All results are quantitative, and are fully documented.
△ Less
Submitted 22 July, 2014;
originally announced July 2014.
-
Physics Methods for the Simulation of Photoionisation
Authors:
Tullio Basaglia,
Matej Batic,
Min Cheol Han,
Gabriela Hoff,
Chan Hyeong Kim,
Han Sung Kim,
Maria Grazia Pia,
Paolo Saracco
Abstract:
Several physics methods for the simulation of the photoelectric effect are quantitatively evaluated with respect to a large collection of experimental data retrieved from the literature. They include theoretical and empirical calculations of total and partial cross sections, and calculations of the photoelectron angular distribution. Some of these models are currently implemented in general purpos…
▽ More
Several physics methods for the simulation of the photoelectric effect are quantitatively evaluated with respect to a large collection of experimental data retrieved from the literature. They include theoretical and empirical calculations of total and partial cross sections, and calculations of the photoelectron angular distribution. Some of these models are currently implemented in general purpose Monte Carlo systems; some have been implemented and evaluated for possible use in Monte Carlo particle transport for the first time in this study.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
-
Negative Improvements, Relative Validity and Elusive Goodness
Authors:
Matej Batic,
Gabriela Hoff,
Chan Hyeong Kim,
Sung Hun Kim,
Maria Grazia Pia,
Paolo Saracco,
Georg Weidenspointner
Abstract:
Various issues related to the complexity of apprais- ing the capabilities of physics models implemented in Monte Carlo simulation codes and the evolution of the functional quality the associated software are considered, such as the dependence on the experimental environment where the software operates and its sensitivity to detector characteristics. The concept of software validity as relative to…
▽ More
Various issues related to the complexity of apprais- ing the capabilities of physics models implemented in Monte Carlo simulation codes and the evolution of the functional quality the associated software are considered, such as the dependence on the experimental environment where the software operates and its sensitivity to detector characteristics. The concept of software validity as relative to the environment is illustrated by means of a real-life experimental test case. Methods and techniques to mitigate the risk of deteriorating the quality of the software are critically discussed: they concern various disciplines of the software development process. Quantitative validation of physics models is advocated as a method to appraise their capabilities objectively and to monitor the evolution of their associated software behavior.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
-
Algorithms and parameters for improved accuracy in physics data libraries
Authors:
M. Batic,
M. Han,
S. Hauf,
G. Hoff,
C. H. Kim,
M. Kuster,
M. G. Pia,
P. Saracco,
H. Seo
Abstract:
Recent efforts for the improvement of the accuracy of physics data libraries used in particle transport are summarized. Results are reported about a large scale validation analysis of atomic parameters used by major Monte Carlo systems (Geant4, EGS, MCNP, Penelope etc.); their contribution to the accuracy of simulation observables is documented. The results of this study motivated the development…
▽ More
Recent efforts for the improvement of the accuracy of physics data libraries used in particle transport are summarized. Results are reported about a large scale validation analysis of atomic parameters used by major Monte Carlo systems (Geant4, EGS, MCNP, Penelope etc.); their contribution to the accuracy of simulation observables is documented. The results of this study motivated the development of a new atomic data management software package, which optimizes the provision of state-of-the-art atomic parameters to physics models. The effect of atomic parameters on the simulation of radioactive decay is illustrated. Ideas and methods to deal with physics models applicable to different energy ranges in the production of data libraries, rather than at runtime, are discussed.
△ Less
Submitted 26 September, 2012;
originally announced September 2012.
-
Refactoring, reengineering and evolution: paths to Geant4 uncertainty quantification and performance improvement
Authors:
M. Batic,
M. Begalli,
M. Han,
S. Hauf,
G. Hoff,
C. H. Kim,
M. Kuster,
M. G. Pia,
P. Saracco,
H. Seo,
G. Weidenspointner,
A. Zoglauer
Abstract:
Ongoing investigations for the improvement of Geant4 accuracy and computational performance resulting by refactoring and reengineering parts of the code are discussed. Issues in refactoring that are specific to the domain of physics simulation are identified and their impact is elucidated. Preliminary quantitative results are reported.
Ongoing investigations for the improvement of Geant4 accuracy and computational performance resulting by refactoring and reengineering parts of the code are discussed. Issues in refactoring that are specific to the domain of physics simulation are identified and their impact is elucidated. Preliminary quantitative results are reported.
△ Less
Submitted 26 September, 2012;
originally announced September 2012.
-
Quantifying the unknown: issues in simulation validation and their experimental impact
Authors:
M. G. Pia,
M. Batic,
G. Hoff,
P. Saracco,
M. Begalli,
M. Han,
C. H Kim,
H. Seo,
S. Hauf,
M. Kuster,
L. Quintieri,
G. Weidenspointner,
A. Zoglauer
Abstract:
The assessment of the reliability of Monte Carlo simulations is discussed, with emphasis on uncertainty quantification and the related impact on experimental results. Methods and techniques to account for epistemic uncertainties, i.e. for intrinsic knowledge gaps in physics modeling, are discussed with the support of applications to concrete experimental scenarios. Ongoing projects regarding the i…
▽ More
The assessment of the reliability of Monte Carlo simulations is discussed, with emphasis on uncertainty quantification and the related impact on experimental results. Methods and techniques to account for epistemic uncertainties, i.e. for intrinsic knowledge gaps in physics modeling, are discussed with the support of applications to concrete experimental scenarios. Ongoing projects regarding the investigation of epistemic uncertainties in the Geant4 simulation toolkit are reported.
△ Less
Submitted 9 November, 2011;
originally announced November 2011.
-
Ionization cross sections for low energy electron transport
Authors:
Hee Seo,
Maria Grazia Pia,
Paolo Saracco,
Chan Hyeong Kim
Abstract:
Two models for the calculation of ionization cross sections by electron impact on atoms, the Binary-Encouter-Bethe and the Deutsch-Maerk models, have been implemented; they are intended to extend and improve Geant4 simulation capabilities in the energy range below 1 keV. The physics features of the implementation of the models are described, and their differences with respect to the original formu…
▽ More
Two models for the calculation of ionization cross sections by electron impact on atoms, the Binary-Encouter-Bethe and the Deutsch-Maerk models, have been implemented; they are intended to extend and improve Geant4 simulation capabilities in the energy range below 1 keV. The physics features of the implementation of the models are described, and their differences with respect to the original formulations are discussed. Results of the verification with respect to the original theoretical sources and of extensive validation with respect to experimental data are reported. The validation process also concerns the ionization cross sections included in the Evaluated Electron Data Library used by Geant4 for low energy electron transport. Among the three cross section options, the Deutsch-Maerk model is identified as the most accurate at reproducing experimental data over the energy range subject to test.
△ Less
Submitted 11 October, 2011;
originally announced October 2011.
-
Evaluation of atomic electron binding energies for Monte Carlo particle transport
Authors:
Maria Grazia Pia,
Hee Seo,
Matej Batic,
Marcia Begalli,
Chan Hyeong Kim,
Lina Quintieri,
Paolo Saracco
Abstract:
A survey of atomic binding energies used by general purpose Monte Carlo systems is reported. Various compilations of these parameters have been evaluated; their accuracy is estimated with respect to experimental data. Their effects on physics quantities relevant to Monte Carlo particle transport are highlighted: X-ray fluorescence emission, electron and proton ionization cross sections, and Dopple…
▽ More
A survey of atomic binding energies used by general purpose Monte Carlo systems is reported. Various compilations of these parameters have been evaluated; their accuracy is estimated with respect to experimental data. Their effects on physics quantities relevant to Monte Carlo particle transport are highlighted: X-ray fluorescence emission, electron and proton ionization cross sections, and Doppler broadening in Compton scattering. The effects due to different binding energies are quantified with respect to experimental data. The results of the analysis provide quantitative ground for the selection of binding energies to optimize the accuracy of Monte Carlo simulation in experimental use cases. Recommendations on software design dealing with these parameters and on the improvement of data libraries for Monte Carlo simulation are discussed.
△ Less
Submitted 27 September, 2011;
originally announced September 2011.
-
Ionisation Models for Nano-Scale Simulation
Authors:
H. Seo,
M. G. Pia,
P. Saracco,
C. H. Kim
Abstract:
Two theory-driven models of electron ionization cross sections, the Binary-Encounter-Bethe model and the Deutsch-Märk model, have been design and implemented; they are intended to extend the simulation capabilities of the Geant4 toolkit. The resulting values, along with the cross sections included in the EEDL data library, have been compared to an extensive set of experimental data, covering more…
▽ More
Two theory-driven models of electron ionization cross sections, the Binary-Encounter-Bethe model and the Deutsch-Märk model, have been design and implemented; they are intended to extend the simulation capabilities of the Geant4 toolkit. The resulting values, along with the cross sections included in the EEDL data library, have been compared to an extensive set of experimental data, covering more than 50 elements over the whole periodic table.
△ Less
Submitted 8 December, 2010;
originally announced December 2010.
-
Atomic Parameters for Monte Carlo Transport Simulation: Survey, Validation and Induced Systematic Effects
Authors:
H. Seo,
M. G. Pia,
L. Quintieri,
M. Begalli,
P. Saracco,
C. H. Kim
Abstract:
A wide survey has been performed, concerning atomic binding energies and ionization energies used by well- known general purpose Monte Carlo codes and a few specialized electromagnetic models for track structure simulation. Validation results are reported.
A wide survey has been performed, concerning atomic binding energies and ionization energies used by well- known general purpose Monte Carlo codes and a few specialized electromagnetic models for track structure simulation. Validation results are reported.
△ Less
Submitted 8 December, 2010;
originally announced December 2010.
-
Design, development and validation of electron ionisation models for nano-scale simulation
Authors:
H. Seo,
M. G. Pia,
P. Saracco,
C. H. Kim
Abstract:
Two theory-driven models of electron ionization cross sections, the Binary-Encounter-Bethe model and the Deutsch-Märk model, have been design and implemented; they are intended to extend the simulation capabilities of the Geant4 toolkit. The resulting values, along with the cross sections included in the EEDL data library, have been compared to an extensive set of experimental data, covering more…
▽ More
Two theory-driven models of electron ionization cross sections, the Binary-Encounter-Bethe model and the Deutsch-Märk model, have been design and implemented; they are intended to extend the simulation capabilities of the Geant4 toolkit. The resulting values, along with the cross sections included in the EEDL data library, have been compared to an extensive set of experimental data, covering more than 50 elements over the whole periodic table.
△ Less
Submitted 3 December, 2010;
originally announced December 2010.
-
New Physics Data Libraries for Monte Carlo Transport
Authors:
M. Augelli,
S. Hauf,
M. Kuster,
M. Han,
C. H. Kim,
M. G. Pia,
L. Quintieri,
H. Seo,
P. Saracco,
G. Weidenspointner,
A. Zoglauer
Abstract:
The role of data libraries as a collaborative tool across Monte Carlo codes is discussed. Some new contributions in this domain are presented; they concern a data library of proton and alpha ionization cross sections, the development in progress of a data library of electron ionization cross sections and proposed improvements to the EADL (Evaluated Atomic Data Library), the latter resulting from a…
▽ More
The role of data libraries as a collaborative tool across Monte Carlo codes is discussed. Some new contributions in this domain are presented; they concern a data library of proton and alpha ionization cross sections, the development in progress of a data library of electron ionization cross sections and proposed improvements to the EADL (Evaluated Atomic Data Library), the latter resulting from an extensive data validation process.
△ Less
Submitted 1 December, 2010;
originally announced December 2010.
-
Physics Data Management Tools for Monte Carlo Transport: Computational Evolutions and Benchmarks
Authors:
Mincheol Han,
Maria Grazia Pia,
Hee Seo,
Lorenzo Moneta,
Chan Hyeong Kim
Abstract:
The development of a package for the management of physics data is described: its design, implementation and computational benchmarks. This package improves the data management tools originally developed for Geant4 physics models based on the EADL, EEDL and EPDL97 data libraries. The implementation exploits recent evolutions of the C++ libraries appearing in the C++0x draft, which are intended for…
▽ More
The development of a package for the management of physics data is described: its design, implementation and computational benchmarks. This package improves the data management tools originally developed for Geant4 physics models based on the EADL, EEDL and EPDL97 data libraries. The implementation exploits recent evolutions of the C++ libraries appearing in the C++0x draft, which are intended for inclusion in the next C++ ISO Standard. The new tools improve the computational performance of physics data management.
△ Less
Submitted 1 December, 2010;
originally announced December 2010.
-
Environmental Adaptability and Mutants: Exploring New Concepts in Particle Transport for Multi-Scale Simulation
Authors:
M. Augelli,
M. Begalli,
M. Han,
S. Hauf,
C. H. Kim,
M. Kuster,
M. G. Pia,
P. Queiroz Filho,
L. Quintieri,
P. Saracco,
H. Seo,
D. Souza Santos,
G. Weidenspointner,
A. Zoglauer
Abstract:
Ongoing investigations to introduce software techniques suitable to support new experimental requirements for multi-scale simulation are discussed.
Ongoing investigations to introduce software techniques suitable to support new experimental requirements for multi-scale simulation are discussed.
△ Less
Submitted 30 November, 2010;
originally announced November 2010.
-
Design and performance evaluations of generic programming techniques in a R&D prototype of Geant4 physics
Authors:
M. G. Pia,
P. Saracco,
M. Sudhakar,
A. Zoglauer,
M. Augelli,
E. Gargioni,
C. H. Kim,
L. Quintieri,
P. P. de Queiroz Filho,
D. de Souza Santos,
G. Weidenspointner,
M. Begalli
Abstract:
A R&D project has been recently launched to investigate Geant4 architectural design in view of addressing new experimental issues in HEP and other related physics disciplines. In the context of this project the use of generic programming techniques besides the conventional object oriented is investigated. Software design features and preliminary results from a new prototype implementation of Gea…
▽ More
A R&D project has been recently launched to investigate Geant4 architectural design in view of addressing new experimental issues in HEP and other related physics disciplines. In the context of this project the use of generic programming techniques besides the conventional object oriented is investigated. Software design features and preliminary results from a new prototype implementation of Geant4 electromagnetic physics are illustrated. Performance evaluations are presented. Issues related to quality assurance in Geant4 physics modelling are discussed.
△ Less
Submitted 15 January, 2010;
originally announced January 2010.
-
R&D on co-working transport schemes in Geant4
Authors:
M. G. Pia,
P. Saracco,
M. Sudhakar,
A. Zoglauer,
M. Augelli,
E. Gargioni,
C. H. Kim,
L. Quintieri,
P. P. de Queiroz Filho,
D. de Souza Santos,
G. Weidenspointner,
M. Begalli
Abstract:
A research and development (R&D) project related to the extension of the Geant4 toolkit has been recently launched to address fundamental methods in radiation transport simulation. The project focuses on simulation at different scales in the same experimental environment; this problem requires new methods across the current boundaries of condensed-random-walk and discrete transport schemes. The…
▽ More
A research and development (R&D) project related to the extension of the Geant4 toolkit has been recently launched to address fundamental methods in radiation transport simulation. The project focuses on simulation at different scales in the same experimental environment; this problem requires new methods across the current boundaries of condensed-random-walk and discrete transport schemes. The new developments have been motivated by experimental requirements in various domains, including nanodosimetry, astronomy and detector developments for high energy physics applications.
△ Less
Submitted 15 January, 2010;
originally announced January 2010.
-
Geant4-related R&D for new particle transport methods
Authors:
M. Augelli,
M. Begalli,
T. Evans,
E. Gargioni,
S. Hauf,
C. H. Kim,
M. Kuster,
M. G. Pia,
P. Queiroz Filho,
L. Quintieri,
P. Saracco,
D. Souza Santos,
G. Weidenspointner,
A. Zoglauer
Abstract:
A R&D project has been launched in 2009 to address fundamental methods in radiation transport simulation and revisit Geant4 kernel design to cope with new experimental requirements. The project focuses on simulation at different scales in the same experimental environment: this set of problems requires new methods across the current boundaries of condensed-random-walk and discrete transport sche…
▽ More
A R&D project has been launched in 2009 to address fundamental methods in radiation transport simulation and revisit Geant4 kernel design to cope with new experimental requirements. The project focuses on simulation at different scales in the same experimental environment: this set of problems requires new methods across the current boundaries of condensed-random-walk and discrete transport schemes. An exploration is also foreseen about exploiting and extending already existing Geant4 features to apply Monte Carlo and deterministic transport methods in the same simulation environment. An overview of this new R&D associated with Geant4 is presented, together with the first developments in progress.
△ Less
Submitted 9 December, 2009;
originally announced December 2009.
-
Research in Geant4 electromagnetic physics design, and its effects on computational performance and quality assurance
Authors:
M. Augelli,
M. Begalli,
S. Hauf,
C. H. Kim,
M. Kuster,
M. G. Pia,
P. Queiroz Filho,
L. Quintieri,
P. Saracco,
D. Souza Santos,
G. Weidenspointner,
A. Zoglauer
Abstract:
The Geant4 toolkit offers a rich variety of electromagnetic physics models; so far the evaluation of this Geant4 domain has been mostly focused on its physics functionality, while the features of its design and their impact on simulation accuracy, computational performance and facilities for verification and validation have not been the object of comparable attention yet, despite the critical ro…
▽ More
The Geant4 toolkit offers a rich variety of electromagnetic physics models; so far the evaluation of this Geant4 domain has been mostly focused on its physics functionality, while the features of its design and their impact on simulation accuracy, computational performance and facilities for verification and validation have not been the object of comparable attention yet, despite the critical role they play in many experimental applications. A new project is in progress to study the application of new design concepts and software techniques in Geant4 electromagnetic physics, and to evaluate how they can improve on the current simulation capabilities. The application of a policy-based class design is investigated as a means to achieve the objective of granular decomposition of processes; this design technique offers various advantages in terms of flexibility of configuration and computational performance. The current Geant4 physics models have been re-implemented according to the new design as a pilot project. The main features of the new design and first results of performance improvement and testing simplification are presented; they are relevant to many Geant4 applications, where computational speed and the containment of resources invested in simulation production and quality assurance play a critical role.
△ Less
Submitted 9 December, 2009;
originally announced December 2009.
-
A fast programmable trigger for isolated cluster counting in the BELLE experiment
Authors:
H. J. Kim,
S. K. Kim,
S. H. Lee,
T. W. Hur,
C. H. Kim,
F. Wang,
I. C. Park,
Hee Jong Kim,
B. G. Cheon,
E. Won
Abstract:
We have developed a fast programmable trigger processor board based on a field programmable gate array and a complex programmable logic device for use in the BELLE experiment. The trigger board accommodates 144 ECL input signals, 2 NIM input signals, 24 ECL output signals, and the VME bus specification. An asynchronous trigger logic for counting isolated clusters is used. We have obtained trigge…
▽ More
We have developed a fast programmable trigger processor board based on a field programmable gate array and a complex programmable logic device for use in the BELLE experiment. The trigger board accommodates 144 ECL input signals, 2 NIM input signals, 24 ECL output signals, and the VME bus specification. An asynchronous trigger logic for counting isolated clusters is used. We have obtained trigger latency of 50 ns with a full access to input and output signals via a VME interface. The trigger logic can be modified at any time depending on the experimental conditions.
△ Less
Submitted 23 November, 1999;
originally announced November 1999.