Showing 1–50 of 87 results for author: Roberts, A

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. Alonso-González, D. W. P. Amaral, J. Anczarski, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, C. Bathurst, R. Bhattacharyya, A. J. Biffl, P. L. Brink, M. Buchanan, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, J. -H. Chen , et al. (117 additional authors not shown)

Abstract: This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon k… ▽ More This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved. △ Less

Submitted 18 July, 2024; v1 submitted 10 July, 2024; originally announced July 2024.

Comments: 7 pages + title and references, 4 figures, and 1 table

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Metasurfaces for infrared multi-modal microscopy: phase contrast and bright field

Authors: Shaban B. Sulejman, Lukas Wesemann, Mikkaela McCormack, Jiajun Meng, James A. Hutchison, Niken Priscilla, Gawain McColl, Katrina Read, Wilson Sim, Andrey A. Sukhorukov, Kenneth B. Crozier, Ann Roberts

Abstract: Different imaging modalities are used to extract the diverse information carried in an optical field. Two prominent modalities include bright field and phase contrast microscopy that can visualize the amplitude and phase features of a sample, respectively. However, capturing both of these images on the same camera typically requires interchanging optical components. Metasurfaces are ultra-thin nan… ▽ More Different imaging modalities are used to extract the diverse information carried in an optical field. Two prominent modalities include bright field and phase contrast microscopy that can visualize the amplitude and phase features of a sample, respectively. However, capturing both of these images on the same camera typically requires interchanging optical components. Metasurfaces are ultra-thin nanostructures that can merge both of these operations into a single miniaturized device. Here, a silicon-based metasurface that supports a Mie resonance is demonstrated to perform near-infrared phase contrast and bright field multi-modal microscopy that can be tuned by changing the polarization of the illumination. We performed experiments using optical fields with phase variations synthesized by a spatial light modulator and introduced by propagation through semi-transparent samples, including C. elegans, unstained human prostate cancer cells and breast tissue. The results demonstrate the potential of metasurfaces for label-free point-of-care testing. △ Less

Submitted 9 June, 2024; v1 submitted 6 June, 2024; originally announced June 2024.

Comments: Main text 18 pages, 5 main figures, Supplementary information 19 pages, 19 supplementary figures, 2 supplementary videos

A new hybrid gadolinium nanoparticles-loaded polymeric material for neutron detection in rare event searches

Authors: DarkSide-20k Collaboration, :, F. Acerbi, P. Adhikari, P. Agnes, I. Ahmad, S. Albergo, I. F. Albuquerque, T. Alexander, A. K. Alton, P. Amaudruz, M. Angiolilli, E. Aprile, R. Ardito, M. Atzori Corona, D. J. Auty, M. Ave, I. C. Avetisov, O. Azzolini, H. O. Back, Z. Balmforth, A. Barrado Olmedo, P. Barrillon, G. Batignani, P. Bhowmick , et al. (290 additional authors not shown)

Abstract: Experiments aimed at direct searches for WIMP dark matter require highly effective reduction of backgrounds and control of any residual radioactive contamination. In particular, neutrons interacting with atomic nuclei represent an important class of backgrounds due to the expected similarity of a WIMP-nucleon interaction, so that such experiments often feature a dedicated neutron detector surround… ▽ More Experiments aimed at direct searches for WIMP dark matter require highly effective reduction of backgrounds and control of any residual radioactive contamination. In particular, neutrons interacting with atomic nuclei represent an important class of backgrounds due to the expected similarity of a WIMP-nucleon interaction, so that such experiments often feature a dedicated neutron detector surrounding the active target volume. In the context of the development of DarkSide-20k detector at INFN Gran Sasso National Laboratory (LNGS), several R&D projects were conceived and developed for the creation of a new hybrid material rich in both hydrogen and gadolinium nuclei to be employed as an essential element of the neutron detector. Thanks to its very high cross-section for neutron capture, gadolinium is one of the most widely used elements in neutron detectors, while the hydrogen-rich material is instrumental in efficiently moderating the neutrons. In this paper results from one of the R&Ds are presented. In this effort the new hybrid material was obtained as a poly(methyl methacrylate) (PMMA) matrix, loaded with gadolinium oxide in the form of nanoparticles. We describe its realization, including all phases of design, purification, construction, characterization, and determination of mechanical properties of the new material. △ Less

Submitted 29 April, 2024; originally announced April 2024.

A 3-D Full-Wave Model to Study the Impact of Soybean Components and Structure on L-Band Backscatter

Authors: Kaiser Niknam, Jasmeet Judge, A. Kaleo Roberts, Alejandro Monsivais-Huertero, Robert Moore, Kamal Sarabandi, Jiayi Wu

Abstract: Microwave remote sensing offers a powerful tool for monitoring the growth of short, dense vegetation like soybean. As the plants mature, changes in their biomass and 3-D structure impact the electromagnetic (EM) backscatter signal. This backscatter information holds valuable insights into crop health and yield, prompting the need for a comprehensive understanding of how structural and biophysical… ▽ More Microwave remote sensing offers a powerful tool for monitoring the growth of short, dense vegetation like soybean. As the plants mature, changes in their biomass and 3-D structure impact the electromagnetic (EM) backscatter signal. This backscatter information holds valuable insights into crop health and yield, prompting the need for a comprehensive understanding of how structural and biophysical properties of soybeans as well as soil characteristics contribute to the overall backscatter signature. In this study, a full-wave model is developed for simulating L-band backscatter from soybean fields. Leveraging the ANSYS High-Frequency Structure Simulator (HFSS) framework, the model solves for the scattering of EM waves from realistic 3-D structural models of soybean, explicitly incorporating the interplant scattering effects. The model estimates of backscatter match well with the field observations from the SMAPVEX16-MicroWEX and SMAPVEX12, with average differences of 1-2 dB for co-pol and less than 4 dB for cross-pol. Furthermore, the model effectively replicates the temporal dynamics of crop backscatter throughout the growing season. The HFSS analysis revealed that the stems and pods are the primary contributors to HH-pol backscatter, while the branches contribute to VV-pol, and leaves impact the cross-pol signatures. In addition, a sensitivity study with 3-D bare soil surface resulted in an average variation of 8 dB in co- and cross-pol, even when the root mean square height and correlation length were held constant. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Scintillation of Ar/CF$_4$ mixtures: glass-THGEM characterization with 1% CF$_4$ at 1-1.5 bar

Authors: P. Amedo, R. Hafeji, A. Roberts, A. Lowe, S. Ravinthiran, S. Leardini, K. Majumdar, K. Mavrokoridis, D. González-Díaz

Abstract: Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contr… ▽ More Argon gas doped with 1% wavelength-shifter (CF$_4$) has been employed in an optical time projection chamber (OTPC) to image cosmic radiation. We present results obtained during the system commissioning, performed with two stacked glass-THGEMs and an EMCCD camera at 1 bar. Preliminary estimates indicate that the combined optical gain was of the order of 10$^6$ (ph/e), producing sharp and high-contrast raw images without resorting to any filtering or post-processing. A first assessment of the impact of pressurization showed no change in the attainable gains when operating at 1.5 bar △ Less

Submitted 8 April, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: Added reference with DOI, fixed error with axis label in plot

Reconfigurable Image Processing Metasurfaces with Phase-Change Materials

Authors: Michele Cotrufo, Shaban B. Sulejman, Lukas Wesemann, Md. Ataur Rahman, Madhu Bhaskaran, Ann Roberts, Andrea Alù

Abstract: Optical metasurfaces have been enabling reduced footprint and power consumption, as well as faster speeds, in the context of analog computing and image processing. While various image processing and optical computing functionalities have been recently demonstrated using metasurfaces, most of the considered devices are static and lack reconfigurability. Yet, the ability to dynamically reconfigure p… ▽ More Optical metasurfaces have been enabling reduced footprint and power consumption, as well as faster speeds, in the context of analog computing and image processing. While various image processing and optical computing functionalities have been recently demonstrated using metasurfaces, most of the considered devices are static and lack reconfigurability. Yet, the ability to dynamically reconfigure processing operations is key for metasurfaces to be able to compete with practical computing systems. Here, we demonstrate a passive edge-detection metasurface operating in the near-infrared regime whose image processing response can be drastically modified by temperature variations smaller than 10° C around a CMOS-compatible temperature of 65° C. Such reconfigurability is achieved by leveraging the insulator-to-metal phase transition of a thin buried layer of vanadium dioxide which, in turn, strongly alters the nonlocal response of the metasurface. Importantly, this reconfigurability is accompanied by performance metrics - such as high numerical aperture, high efficiency, isotropy, and polarization-independence - close to optimal, and it is combined with a simple geometry compatible with large-scale manufacturing. Our work paves the way to a new generation of ultra-compact, tunable, passive devices for all-optical computation, with potential applications in augmented reality, remote sensing and bio-medical imaging. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: Main text (18 pages, 5 figures), followed by high-resolution vector-graphic versions of the figures and by the Supplementary Information

Directionality of nuclear recoils in a liquid argon time projection chamber

Authors: The DarkSide-20k Collaboration, :, P. Agnes, I. Ahmad, S. Albergo, I. F. M. Albuquerque, T. Alexander, A. K. Alton, P. Amaudruz, M. Atzori Corona, M. Ave, I. Ch. Avetisov, O. Azzolini, H. O. Back, Z. Balmforth, A. Barrado-Olmedo, P. Barrillon, A. Basco, G. Batignani, V. Bocci, W. M. Bonivento, B. Bottino, M. G. Boulay, J. Busto, M. Cadeddu , et al. (243 additional authors not shown)

Abstract: The direct search for dark matter in the form of weakly interacting massive particles (WIMP) is performed by detecting nuclear recoils (NR) produced in a target material from the WIMP elastic scattering. A promising experimental strategy for direct dark matter search employs argon dual-phase time projection chambers (TPC). One of the advantages of the TPC is the capability to detect both the scint… ▽ More The direct search for dark matter in the form of weakly interacting massive particles (WIMP) is performed by detecting nuclear recoils (NR) produced in a target material from the WIMP elastic scattering. A promising experimental strategy for direct dark matter search employs argon dual-phase time projection chambers (TPC). One of the advantages of the TPC is the capability to detect both the scintillation and charge signals produced by NRs. Furthermore, the existence of a drift electric field in the TPC breaks the rotational symmetry: the angle between the drift field and the momentum of the recoiling nucleus can potentially affect the charge recombination probability in liquid argon and then the relative balance between the two signal channels. This fact could make the detector sensitive to the directionality of the WIMP-induced signal, enabling unmistakable annual and daily modulation signatures for future searches aiming for discovery. The Recoil Directionality (ReD) experiment was designed to probe for such directional sensitivity. The TPC of ReD was irradiated with neutrons at the INFN Laboratori Nazionali del Sud, and data were taken with 72 keV NRs of known recoil directions. The direction-dependent liquid argon charge recombination model by Cataudella et al. was adopted and a likelihood statistical analysis was performed, which gave no indications of significant dependence of the detector response to the recoil direction. The aspect ratio R of the initial ionization cloud is estimated to be 1.037 +/- 0.027 and the upper limit is R < 1.072 with 90% confidence level △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 20 pages, 10 figures, submitted to Eur. Phys. J. C

Journal ref: Eur. Phys. J. C 84:24 (2024)

First measurement of the nuclear-recoil ionization yield in silicon at 100 eV

Authors: M. F. Albakry, I. Alkhatib, D. Alonso, D. W. P. Amaral, P. An, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, P. S. Barbeau, C. Bathurst, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott , et al. (115 additional authors not shown)

Abstract: We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for furthe… ▽ More We measured the nuclear--recoil ionization yield in silicon with a cryogenic phonon-sensitive gram-scale detector. Neutrons from a mono-energetic beam scatter off of the silicon nuclei at angles corresponding to energy depositions from 4\,keV down to 100\,eV, the lowest energy probed so far. The results show no sign of an ionization production threshold above 100\,eV. These results call for further investigation of the ionization yield theory and a comprehensive determination of the detector response function at energies below the keV scale. △ Less

Submitted 3 March, 2023; originally announced March 2023.

Journal ref: Physical Review Letters 131.9 (2023): 091801

ARIADNE+: Large scale demonstration of fast optical readout for dual-phase LArTPCs at the CERN Neutrino Platform

Authors: Adam Lowe, Pablo Amedo, Diego González-Díaz, Alexander Deisting, Krishanu Majumdar, Konstantinos Mavrokoridis, Marzio Nessi, Barney Philippou, Francesco Pietropaolo, Sudikshan Ravinthiran, Filippo Resnati, Adam Roberts, Angela Saá Hernández, Christos Touramanis, Jared Vann

Abstract: Optical readout of large scale dual-phase liquid Argon TPCs is an attractive alternative to charge readout and has been successfully demonstrated on a 2x2m active region within the CERN protoDUNE cold box. ARIADNE+ uses four Timepix3 cameras imaging the S2 light produced by 16 novel, patent pending, glass THGEMs. ARIADNE+ takes advantage of the raw Timepix3 data coming natively 3D and zero suppres… ▽ More Optical readout of large scale dual-phase liquid Argon TPCs is an attractive alternative to charge readout and has been successfully demonstrated on a 2x2m active region within the CERN protoDUNE cold box. ARIADNE+ uses four Timepix3 cameras imaging the S2 light produced by 16 novel, patent pending, glass THGEMs. ARIADNE+ takes advantage of the raw Timepix3 data coming natively 3D and zero suppressed with a 1.6ns timing resolution. Three of the four THGEM quadrants implement readout in the visible light range through wavelength shifting, with the fourth featuring a VUV light intensifier, thus removing the need for wavelength shifting altogether. Cosmic ray reconstruction and energy calibration was performed. Presented is a summary of the detector setup and experimental run, preliminary analysis of the run data and future outlook for the ARIADNE program. △ Less

Submitted 25 August, 2023; v1 submitted 6 January, 2023; originally announced January 2023.

Comments: Proceedings for NuFACT2022

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Two novel families of multiscale staggered patch schemes efficiently simulate large-scale, weakly damped, linear waves

Authors: J. Divahar, A. J. Roberts, Trent W. Mattner, J. E. Bunder, Ioannis G. Kevrekidis

Abstract: Many multiscale wave systems exhibit macroscale emergent behaviour, for example, the fluid dynamics of floods and tsunamis. Resolving a large range of spatial scales typically requires a prohibitively high computational cost. The small dissipation in wave systems poses a significant challenge to further developing multiscale modelling methods in multiple dimensions. This article develops and evalu… ▽ More Many multiscale wave systems exhibit macroscale emergent behaviour, for example, the fluid dynamics of floods and tsunamis. Resolving a large range of spatial scales typically requires a prohibitively high computational cost. The small dissipation in wave systems poses a significant challenge to further developing multiscale modelling methods in multiple dimensions. This article develops and evaluates two families of equation-free multiscale methods on novel 2D staggered patch schemes, and demonstrates the power and utility of these multiscale schemes for weakly damped linear waves. A detailed study of sensitivity to numerical roundoff errors establishes the robustness of developed staggered patch schemes. Comprehensive eigenvalue analysis over a wide range of parameters establishes the stability, accuracy, and consistency of the multiscale schemes. Analysis of the computational complexity shows that the measured compute times of the multiscale schemes may be 10^5 times smaller than the compute time for the corresponding full-domain computation. This work provides the essential foundation for efficient large-scale simulation of challenging nonlinear multiscale waves. △ Less

Submitted 27 October, 2022; originally announced October 2022.

Comments: 35 pages, 12 figures, and 6 tables

CompF5: End User Analysis Topical Group Report

Authors: Gavin S. Davies, Peter Onyisi, Amy Roberts

Abstract: This report summarizes the work of the Computational Frontier topical group on end user analysis for Snowmass 2021. End User Analysis refers to the extraction of physics results from reconstructed and simulated experimental data. High energy physics experiments produce systems that perform common reconstruction, calibration, and simulation tasks, resulting in shared data samples. These detailed da… ▽ More This report summarizes the work of the Computational Frontier topical group on end user analysis for Snowmass 2021. End User Analysis refers to the extraction of physics results from reconstructed and simulated experimental data. High energy physics experiments produce systems that perform common reconstruction, calibration, and simulation tasks, resulting in shared data samples. These detailed data samples are then reduced to create a range of analysis samples, often optimized for a particular physics topic by a trigger or data object selection. End users (analyzers) then analyze those samples to produce physics results. Community discussions converged on categorizing the end user analysis ensemble into Analysis Ecosystems, Analysis Models, Dataset Bookkeeping and Formats, Collaborative Software, and Training. We present findings and recommendations based on these key areas that impact end user analysis. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Comments: Report of the Computational Frontier Topical Group on End User Analysis for Snowmass 2021

Thin film notch filters as platforms for biological image processing

Authors: Shaban B. Sulejman, Niken Priscilla, Lukas Wesemann, Wendy S. L. Lee, Jieqiong Lou, Elizabeth Hinde, Timothy J. Davis, Ann Roberts

Abstract: Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical… ▽ More Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical cancer cells. This work demonstrates the potential of non-local, non-interferometric approaches to image processing for uses in label-free biological cell imaging and dynamical monitoring. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: manuscript 14 pages, 5 figures, supplementary material 7 pages, 4 supplementary figures

Sensitivity projections for a dual-phase argon TPC optimized for light dark matter searches through the ionization channel

Authors: P. Agnes, I. Ahmad, S. Albergo, I. F. M. Albuquerque, T. Alexander, A. K. Alton, P. Amaudruz, M. Atzori Corona, D. J. Auty, M. Ave, I. Ch. Avetisov, R. I. Avetisov, O. Azzolini, H. O. Back, Z. Balmforth, V. Barbarian, A. Barrado Olmedo, P. Barrillon, A. Basco, G. Batignani, E. Berzin, A. Bondar, W. M. Bonivento, E. Borisova, B. Bottino , et al. (274 additional authors not shown)

Abstract: Dark matter lighter than 10 GeV/c$^2$ encompasses a promising range of candidates. A conceptual design for a new detector, DarkSide-LowMass, is presented, based on the DarkSide-50 detector and progress toward DarkSide-20k, optimized for a low-threshold electron-counting measurement. Sensitivity to light dark matter is explored for various potential energy thresholds and background rates. These stu… ▽ More Dark matter lighter than 10 GeV/c$^2$ encompasses a promising range of candidates. A conceptual design for a new detector, DarkSide-LowMass, is presented, based on the DarkSide-50 detector and progress toward DarkSide-20k, optimized for a low-threshold electron-counting measurement. Sensitivity to light dark matter is explored for various potential energy thresholds and background rates. These studies show that DarkSide-LowMass can achieve sensitivity to light dark matter down to the solar neutrino floor for GeV-scale masses and significant sensitivity down to 10 MeV/c$^2$ considering the Migdal effect or interactions with electrons. Requirements for optimizing the detector's sensitivity are explored, as are potential sensitivity gains from modeling and mitigating spurious electron backgrounds that may dominate the signal at the lowest energies. △ Less

Submitted 20 June, 2023; v1 submitted 2 September, 2022; originally announced September 2022.

Journal ref: Phys. Rev. D 107, 112006 (2023)

Staggered grids for multidimensional multiscale modelling

Authors: J. Divahar, A. J. Roberts, Trent W. Mattner, J. E. Bunder, Ioannis G. Kevrekidis

Abstract: Numerical schemes for wave-like systems with small dissipation are often inaccurate and unstable due to truncation errors and numerical roundoff errors. Hence, numerical simulations of wave-like systems lacking proper handling of these numerical issues often fail to represent the physical characteristics of wave phenomena. This challenge gets even more intricate for multiscale modelling, especiall… ▽ More Numerical schemes for wave-like systems with small dissipation are often inaccurate and unstable due to truncation errors and numerical roundoff errors. Hence, numerical simulations of wave-like systems lacking proper handling of these numerical issues often fail to represent the physical characteristics of wave phenomena. This challenge gets even more intricate for multiscale modelling, especially in multiple dimensions. When using the usual collocated grid, about two-thirds of the resolved wave modes are incorrect with significant dispersion. But, numerical schemes on staggered grids (with alternating variable arrangement) are significantly less dispersive and preserve much of the wave characteristics. Also, the group velocity of the energy propagation in the numerical waves on a staggered grid is in the correct direction, in contrast to the collocated grid. For high accuracy and to preserve much of the wave characteristics, this article extends the concept of staggered grids in full-domain modelling to multidimensional multiscale modelling. Specifically, this article develops 120 multiscale staggered grids and demonstrates their stability, accuracy, and wave-preserving characteristic for equation-free multiscale modelling of weakly damped linear waves. But most characteristics of the developed multiscale staggered grids must also hold in general for multiscale modelling of many complex spatio-temporal physical phenomena such as the general computational fluid dynamics. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: 42 pages, 13 figures, and 1 table

Intrinsic Fano factor of nuclear recoils for dark matter searches

Authors: M. Matheny, A. Roberts, A. Srinivasan, A. N. Villano

Abstract: Nuclear recoils in germanium and silicon are shown to have much larger variance in electron-hole production than their electron-recoil counterparts for recoil energies between 10 and 200\,keV. This effect--owing primarily to deviations in the amount of energy given to the crystal lattice in response to a nuclear recoil of a given energy--has been predicted by the Lindhard model. We parameterize th… ▽ More Nuclear recoils in germanium and silicon are shown to have much larger variance in electron-hole production than their electron-recoil counterparts for recoil energies between 10 and 200\,keV. This effect--owing primarily to deviations in the amount of energy given to the crystal lattice in response to a nuclear recoil of a given energy--has been predicted by the Lindhard model. We parameterize the variance in terms of an intrinsic nuclear recoil Fano factor which is 24.3$\pm$0.2 and 26$\pm$8 at around 25\,keV for silicon and germanium respectively. The variance has important effects on the expected signal shapes for experiments utilizing low-energy nuclear recoils such as direct dark matter searches and coherent neutrino-nucleus scattering measurements. △ Less

Submitted 12 December, 2022; v1 submitted 27 June, 2022; originally announced June 2022.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev. D 106, 123009 (2022)

A Pseudo-Two-Dimensional (P2D) Model for FeS2 Conversion Cathode Batteries

Authors: Jeffrey S. Horner, Grace Whang, Igor V. Kolesnichenko, Timothy N. Lambert, Bruce S. Dunn, Scott A. Roberts

Abstract: Conversion cathode materials are gaining interest for secondary batteries due to their high theoretical energy and power density. However, practical application as a secondary battery material is currently limited by practical issues such as poor cyclability. To better understand these materials, we have developed a pseudo-two-dimensional model for conversion cathodes. We apply this model to FeS2… ▽ More Conversion cathode materials are gaining interest for secondary batteries due to their high theoretical energy and power density. However, practical application as a secondary battery material is currently limited by practical issues such as poor cyclability. To better understand these materials, we have developed a pseudo-two-dimensional model for conversion cathodes. We apply this model to FeS2 - a material that undergoes intercalation followed by conversion during discharge. The model is derived from the half-cell Doyle-Fuller-Newman model with additional loss terms added to reflect the converted shell resistance as the reaction progresses. We also account for polydisperse active material particles by incorporating a variable active surface area and effective particle radius. Using the model, we show that the leading loss mechanisms for FeS2 are associated with solid-state diffusion and electrical transport limitations through the converted shell material. The polydisperse simulations are also compared to a monodisperse system, and we show that polydispersity has very little effect on the intercalation behavior yet leads to capacity loss during the conversion reaction. We provide the code as an open-source Python Battery Mathematical Modelling (PyBaMM) model that can be used to identify performance limitations for other conversion cathode materials. △ Less

Submitted 16 July, 2022; v1 submitted 1 June, 2022; originally announced June 2022.

Journal ref: Journal of Power Sources Volume 544, 1 October 2022, 231893

Investigating the sources of low-energy events in a SuperCDMS-HVeV detector

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (104 additional authors not shown)

Abstract: Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS… ▽ More Recent experiments searching for sub-GeV/$c^2$ dark matter have observed event excesses close to their respective energy thresholds. Although specific to the individual technologies, the measured excess event rates have been consistently reported at or below event energies of a few-hundred eV, or with charges of a few electron-hole pairs. In the present work, we operated a 1-gram silicon SuperCDMS-HVeV detector at three voltages across the crystal (0 V, 60 V and 100 V). The 0 V data show an excess of events in the tens of eV region. Despite this event excess, we demonstrate the ability to set a competitive exclusion limit on the spin-independent dark matter--nucleon elastic scattering cross section for dark matter masses of $\mathcal{O}(100)$ MeV/$c^2$, enabled by operation of the detector at 0 V potential and achievement of a very low $\mathcal{O}(10)$ eV threshold for nuclear recoils. Comparing the data acquired at 0 V, 60 V and 100 V potentials across the crystal, we investigated possible sources of the unexpected events observed at low energy. The data indicate that the dominant contribution to the excess is consistent with a hypothesized luminescence from the printed circuit boards used in the detector holder. △ Less

Submitted 11 October, 2022; v1 submitted 17 April, 2022; originally announced April 2022.

A Strategy for Low-Mass Dark Matter Searches with Cryogenic Detectors in the SuperCDMS SNOLAB Facility

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, R. Bhattacharyya, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeno, Y. -Y. Chang, M. Chaudhuri, R. Chen, N. Chott, J. Cooley , et al. (103 additional authors not shown)

Abstract: The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-ba… ▽ More The SuperCDMS Collaboration is currently building SuperCDMS SNOLAB, a dark matter search focused on nucleon-coupled dark matter in the 1-5 GeV/c$^2$ mass range. Looking to the future, the Collaboration has developed a set of experience-based upgrade scenarios, as well as novel directions, to extend the search for dark matter using the SuperCDMS technology in the SNOLAB facility. The experienced-based scenarios are forecasted to probe many square decades of unexplored dark matter parameter space below 5 GeV/c$^2$, covering over 6 decades in mass: 1-100 eV/c$^2$ for dark photons and axion-like particles, 1-100 MeV/c$^2$ for dark-photon-coupled light dark matter, and 0.05-5 GeV/c$^2$ for nucleon-coupled dark matter. They will reach the neutrino fog in the 0.5-5 GeV/c$^2$ mass range and test a variety of benchmark models and sharp targets. The novel directions involve greater departures from current SuperCDMS technology but promise even greater reach in the long run, and their development must begin now for them to be available in a timely fashion. The experienced-based upgrade scenarios rely mainly on dramatic improvements in detector performance based on demonstrated scaling laws and reasonable extrapolations of current performance. Importantly, these improvements in detector performance obviate significant reductions in background levels beyond current expectations for the SuperCDMS SNOLAB experiment. Given that the dominant limiting backgrounds for SuperCDMS SNOLAB are cosmogenically created radioisotopes in the detectors, likely amenable only to isotopic purification and an underground detector life-cycle from before crystal growth to detector testing, the potential cost and time savings are enormous and the necessary improvements much easier to prototype. △ Less

Submitted 1 April, 2023; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021; v2 updated (assorted corrections and improvements to forecasts) October 2022; v3 updated (corrected SuperCDMS SNOLAB sensitivity curves in upgrade forecast plots in body of text) April 2023

Dark-matter And Neutrino Computation Explored (DANCE) Community Input to Snowmass

Authors: Amy Roberts, Christopher Tunnell, Belina von Krosigk, Tyler Anderson, Jason Brodsky, Micah Buuck, Tina Cartaro, Melissa Cragin, Gavin S. Davies, Miriam Diamond, Alden Fan, Aaron Higuera, Valerio Ippolito, Chris Jillings, Scott Kravitz, Luke Krezko, Ivy Li, Maria Elena Monzani, Igor Ostrovskiy, Fernanda Psihas, Andrew Renshaw, Quentin Riffard, Joel Sander, Samuele Sangiorgio, Reto Trappitsch , et al. (1 additional authors not shown)

Abstract: This paper summarizes the needs of the dark matter and neutrino communities as it relates to computation. The scope includes data acquisition, triggers, data management and processing, data preservation, simulation, machine learning, data analysis, software engineering, career development, and equity and inclusion. Beyond identifying our community needs, we propose actions that can be taken to str… ▽ More This paper summarizes the needs of the dark matter and neutrino communities as it relates to computation. The scope includes data acquisition, triggers, data management and processing, data preservation, simulation, machine learning, data analysis, software engineering, career development, and equity and inclusion. Beyond identifying our community needs, we propose actions that can be taken to strengthen this community and to work together to overcome common challenges. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Needs identified during DANCE Workshop series. Submitted to Snowmass. 33 pages and 1 picture

Snowmass2021 Cosmic Frontier: Modeling, statistics, simulations, and computing needs for direct dark matter detection

Authors: Yonatan Kahn, Maria Elena Monzani, Kimberly J. Palladino, Tyler Anderson, Deborah Bard, Daniel Baxter, Micah Buuck, Concetta Cartaro, Juan I. Collar, Miriam Diamond, Alden Fan, Simon Knapen, Scott Kravitz, Rafael F. Lang, Benjamin Nachman, Ibles Olcina Samblas, Igor Ostrovskiy, Aditya Parikh, Quentin Riffard, Amy Roberts, Kelly Stifter, Matthew Szydagis, Christopher Tunnell, Belina von Krosigk, Dennis Wright , et al. (12 additional authors not shown)

Abstract: This paper summarizes the modeling, statistics, simulation, and computing needs of direct dark matter detection experiments in the next decade. This paper summarizes the modeling, statistics, simulation, and computing needs of direct dark matter detection experiments in the next decade. △ Less

Submitted 27 December, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Ionization yield measurement in a germanium CDMSlite detector using photo-neutron sources

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (104 additional authors not shown)

Abstract: Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yie… ▽ More Two photo-neutron sources, $^{88}$Y$^{9}$Be and $^{124}$Sb$^{9}$Be, have been used to investigate the ionization yield of nuclear recoils in the CDMSlite germanium detectors by the SuperCDMS collaboration. This work evaluates the yield for nuclear recoil energies between 1 keV and 7 keV at a temperature of $\sim$ 50 mK. We use a Geant4 simulation to model the neutron spectrum assuming a charge yield model that is a generalization of the standard Lindhard model and consists of two energy dependent parameters. We perform a likelihood analysis using the simulated neutron spectrum, modeled background, and experimental data to obtain the best fit values of the yield model. The ionization yield between recoil energies of 1 keV and 7 keV is shown to be significantly lower than predicted by the standard Lindhard model for germanium. There is a general lack of agreement among different experiments using a variety of techniques studying the low-energy range of the nuclear recoil yield, which is most critical for interpretation of direct dark matter searches. This suggests complexity in the physical process that many direct detection experiments use to model their primary signal detection mechanism and highlights the need for further studies to clarify underlying systematic effects that have not been well understood up to this point. △ Less

Submitted 27 June, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. D 105, 122002 (2022)

Ultrahigh quality infrared polaritonic resonators based on bottom-up-synthesized van der Waals nanoribbons

Authors: Shang-Jie Yu, Yue Jiang, John A. Roberts, Markus A. Huber, Helen Yao, Xinjian Shi, Hans A. Bechtel, Stephanie N. Gilbert Corder, Tony F. Heinz, Xiaolin Zheng, Jonathan A. Fan

Abstract: van der Waals nanomaterials supporting phonon polariton quasiparticles possess unprecedented light confinement capabilities, making them ideal systems for molecular sensing, thermal emission, and subwavelength imaging applications, but they require defect-free crystallinity and nanostructured form factors to fully showcase these capabilities. We introduce bottom-up-synthesized α-MoO3 structures as… ▽ More van der Waals nanomaterials supporting phonon polariton quasiparticles possess unprecedented light confinement capabilities, making them ideal systems for molecular sensing, thermal emission, and subwavelength imaging applications, but they require defect-free crystallinity and nanostructured form factors to fully showcase these capabilities. We introduce bottom-up-synthesized α-MoO3 structures as nanoscale phonon polaritonic systems that feature tailorable morphologies and crystal qualities consistent with bulk single crystals. α-MoO3 nanoribbons serve as low-loss hyperbolic Fabry-Pérot nanoresonators, and we experimentally map hyperbolic resonances over four Reststrahlen bands spanning the far- and mid-infrared spectral range, including resonance modes beyond the tenth order. The measured quality factors are the highest from phonon polaritonic van der Waals structures to date. We anticipate that bottom-up-synthesized polaritonic van der Waals nanostructures will serve as an enabling high-performance and low-loss platform for infrared optical and optoelectronic applications. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Electrically Driven Hyperbolic Nanophotonic Resonators as High Speed, Spectrally Selective Thermal Radiators

Authors: John Andris Roberts, Po-Hsun Ho, Shang-Jie Yu, Jonathan A. Fan

Abstract: We introduce and experimentally demonstrate a new class of electrically driven thermal emitter based on globally aligned carbon nanotube metamaterials patterned as nanoscale ribbons. The metamaterial ribbons exhibit electronic and photonic properties with extreme anisotropy, which enable low loss, wavelength-compressed hyperbolic photonic modes along one axis and high electrical resistivity and ef… ▽ More We introduce and experimentally demonstrate a new class of electrically driven thermal emitter based on globally aligned carbon nanotube metamaterials patterned as nanoscale ribbons. The metamaterial ribbons exhibit electronic and photonic properties with extreme anisotropy, which enable low loss, wavelength-compressed hyperbolic photonic modes along one axis and high electrical resistivity and efficient Joule heating along the other axis. Devices batch-fabricated on a single chip emit linearly polarized thermal radiation with peak wavelengths dictated by their hyperbolic resonances, and their low thermal mass yields infrared radiation modulation rates as high as one megahertz. As a proof-of-concept demonstration, we show that two sets of thermal emitters on a single chip, each operating with different spectral peak positions and modulation rates, can be used to sense carbon dioxide with a single detector. We anticipate that the combination of batch fabrication, wide modulation bandwidth, and customized spectral tuning with hyperbolic chip-based thermal emitters will enable new modalities in multiplexed infrared sources for sensing, imaging, and metrology applications. △ Less

Submitted 7 January, 2022; originally announced January 2022.

Journal ref: Nano Letters 2022, 22, 14, 5832-5840

An unstructured CD-grid variational formulation for sea ice dynamics

Authors: Giacomo Capodaglio, Mark R. Petersen, Adrian K. Turner, Andrew F. Roberts

Abstract: For the numerical simulation of earth system models, Arakawa grids are largely employed. A quadrilateral mesh is assumed for their classical definition, and different types of grids are identified depending on the location of the discretized quantities. The B-grid has both velocity components at the center of a cell, the C-grid places the velocity components on the edges in a staggered fashion, an… ▽ More For the numerical simulation of earth system models, Arakawa grids are largely employed. A quadrilateral mesh is assumed for their classical definition, and different types of grids are identified depending on the location of the discretized quantities. The B-grid has both velocity components at the center of a cell, the C-grid places the velocity components on the edges in a staggered fashion, and the D-grid is a ninety-degree rotation of a C-grid. Historically, B-grid formulations of sea ice dynamics have been dominant because they have matched the grid type used by ocean models. In recent years, as ocean models have increasingly progressed to C-grids, sea ice models have followed suit on quadrilateral meshes, but few if any implementations of unstructured C-grid sea ice models have been developed. In this work, we present an unstructured CD-grid type formulation of the elastic-viscous-plastic rheology, where the velocity unknowns are located at the edges, rather than at the vertices, as in the B-grid. The notion of a CD-grid has been recently introduced and assumes that the velocity components are co-located at the edges. The mesh cells in our analysis have $n$ sides, with $n$ greater than or equal to four. Numerical results are included to investigate the features of the proposed method. Our framework of choice is the Model for Prediction Across Scales (MPAS) within E3SM, the climate model of the U.S. Department of Energy, although our approach is general and could be applied to other models as well. While MPAS-Seaice is currently defined on a B-grid, MPAS-Ocean runs on a C-grid, hence interpolation operators are heavily used when coupled simulations are performed. The discretization introduced here aims at transitioning the dynamics of MPAS-Seaice to a CD-grid, to ultimately facilitate improved coupling with MPAS-Ocean and reduce numerical errors associated with this communication. △ Less

Submitted 6 July, 2022; v1 submitted 30 December, 2021; originally announced December 2021.

Report number: LA-UR-21-32250

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Real time phase imaging with an asymmetric transfer function metasurface

Authors: Lukas Wesemann, Jon Rickett, Timothy J. Davis, Ann Roberts

Abstract: The conversion of phase variations in an optical wavefield into intensity information is of fundamental importance for optical imaging technology including microscopy of biological cells. While conventional approaches to phase-imaging commonly rely on bulky optical components or computational post processing, meta-optical devices have recently demonstrated all-optical, ultracompact image processin… ▽ More The conversion of phase variations in an optical wavefield into intensity information is of fundamental importance for optical imaging technology including microscopy of biological cells. While conventional approaches to phase-imaging commonly rely on bulky optical components or computational post processing, meta-optical devices have recently demonstrated all-optical, ultracompact image processing methods. Here we describe a metasurface that exploits photonic spin-orbit coupling to create an asymmetric optical transfer function for real time phase-imaging. The effect of the asymmetry on transmission through the device is demonstrated experimentally with the generation of high contrast pseudo-3D intensity images of phase variations in an optical wavefield without the need for post-processing. This non-interferometric method has potential applications in biological live cell imaging and real-time wavefront sensing. △ Less

Submitted 9 November, 2021; originally announced November 2021.

Comments: manuscript 11 pages, supplement 7 pages

Report number: UOM-1676159

Journal ref: ACS Photonics 9 2022 1803-1807

A Novel Manufacturing Process for Glass THGEMs and First Characterisation in an Optical Gaseous Argon TPC

Authors: Adam Lowe, Krishanu Majumdar, Konstantinos Mavrokoridis, Barney Philippou, Adam Roberts, Christos Touramanis

Abstract: This paper details a novel, patent pending, abrasive machining manufacturing process for the formation of sub-millimetre holes in THGEMs, with the intended application in gaseous and dual-phase TPCs. Abrasive machining favours a non-ductile substrate such as glasses or ceramics. This innovative manufacturing process allows for unprecedented versatility in THGEM substrates, electrodes, and hole geo… ▽ More This paper details a novel, patent pending, abrasive machining manufacturing process for the formation of sub-millimetre holes in THGEMs, with the intended application in gaseous and dual-phase TPCs. Abrasive machining favours a non-ductile substrate such as glasses or ceramics. This innovative manufacturing process allows for unprecedented versatility in THGEM substrates, electrodes, and hole geometry and pattern. Consequently, THGEMs produced via abrasive machining can be tailored for specific properties, for example: high stiffness, low total thickness variation, radiopurity, moisture absorption/outgassing and/or carbonisation resistance. This paper specifically focuses on three glass substrate THGEMs (G-THGEMs) made from Schott Borofloat 33 and Fused Silica. Circular and hexagonal hole shapes are also investigated. The G-THGEM electrodes are made from Indium Tin Oxide (ITO), with a resistivity of 150 $Ω$/Sq. All G-THGEMs were characterised in an optical (EMCCD) readout GArTPC, and compared to a traditionally manufactured FR4 THGEM, with their charging and secondary scintillation (S2) light production behaviour analysed. △ Less

Submitted 10 November, 2021; v1 submitted 7 September, 2021; originally announced September 2021.

Electrochemical Modeling of GITT Measurements for Improved Solid-State Diffusion Coefficient Evaluation

Authors: Jeffrey S. Horner, Grace Whang, David S. Ashby, Igor V. Kolesnichenko, Timothy N. Lambert, Bruce S. Dunn, A. Alec Talin, Scott A. Roberts

Abstract: Galvanostatic Intermittent Titration Technique (GITT) is widely used to evaluate solid-state diffusion coefficients in electrochemical systems. However, the existing analysis methods for GITT data require numerous assumptions, and the derived diffusion coefficients typically are not independently validated. To investigate the validity of the assumptions and derived diffusion coefficients, we emplo… ▽ More Galvanostatic Intermittent Titration Technique (GITT) is widely used to evaluate solid-state diffusion coefficients in electrochemical systems. However, the existing analysis methods for GITT data require numerous assumptions, and the derived diffusion coefficients typically are not independently validated. To investigate the validity of the assumptions and derived diffusion coefficients, we employ a direct pulse fitting method for interpreting GITT data that involves numerically fitting an electrochemical pulse and subsequent relaxation to a one-dimensional, single-particle, electrochemical model coupled with non-ideal transport to directly evaluate diffusion coefficients that are independently verified through cycling predictions. Extracted from GITT measurements of the intercalation regime of FeS2 and used to predict the discharge behavior, our non-ideal diffusion coefficients prove to be two orders of magnitude more accurate than ideal diffusion coefficients extracted using conventional methods. We further extend our model to a polydisperse set of particles to show the validity of a single-particle approach when the modeled radius is proportional to the total volume-to-surface-area ratio of the system. △ Less

Submitted 22 October, 2021; v1 submitted 13 July, 2021; originally announced July 2021.

Journal ref: ACS Appl. Energy Mater. 2021

Why is AI hard and Physics simple?

Authors: Daniel A. Roberts

Abstract: We discuss why AI is hard and why physics is simple. We discuss how physical intuition and the approach of theoretical physics can be brought to bear on the field of artificial intelligence and specifically machine learning. We suggest that the underlying project of machine learning and the underlying project of physics are strongly coupled through the principle of sparsity, and we call upon theor… ▽ More We discuss why AI is hard and why physics is simple. We discuss how physical intuition and the approach of theoretical physics can be brought to bear on the field of artificial intelligence and specifically machine learning. We suggest that the underlying project of machine learning and the underlying project of physics are strongly coupled through the principle of sparsity, and we call upon theoretical physicists to work on AI as physicists. As a first step in that direction, we discuss an upcoming book on the principles of deep learning theory that attempts to realize this approach. △ Less

Submitted 31 March, 2021; originally announced April 2021.

Comments: written for a special issue of Machine Learning: Science and Technology as an invited perspective piece

Report number: MIT-CTP/5269

Constraints on Lightly Ionizing Particles from CDMSlite

Authors: SuperCDMS Collaboration, I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (93 additional authors not shown)

Abstract: The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the v… ▽ More The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) achieved efficient detection of very small recoil energies in its germanium target, resulting in sensitivity to Lightly Ionizing Particles (LIPs) in a previously unexplored region of charge, mass, and velocity parameter space. We report first direct-detection limits calculated using the optimum interval method on the vertical intensity of cosmogenically-produced LIPs with an electric charge smaller than $e/(3\times10^5$), as well as the strongest limits for charge $\leq e/160$, with a minimum vertical intensity of $1.36\times10^{-7}$\,cm$^{-2}$s$^{-1}$sr$^{-1}$ at charge $e/160$. These results apply over a wide range of LIP masses (5\,MeV/$c^2$ to 100\,TeV/$c^2$) and cover a wide range of $βγ$ values (0.1 -- $10^6$), thus excluding non-relativistic LIPs with $βγ$ as small as 0.1 for the first time. △ Less

Submitted 19 February, 2022; v1 submitted 18 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Lett. 127, 081802 (2021)

Optical Readout of the ARIADNE LArTPC using a Timepix3-based Camera

Authors: Adam Lowe, Krishanu Majumdar, Konstantinos Mavrokoridis, Barney Philippou, Adam Roberts, Christos Touramanis, Jared Vann

Abstract: The ARIADNE Experiment, utilising a 1-ton dual-phase Liquid Argon Time Projection Chamber (LArTPC), aims to develop and mature optical readout technology for large scale LAr detectors. This paper describes the characterisation, using cosmic muons, of a Timepix3-based camera mounted on the ARIADNE detector. The raw data from the camera are natively 3D and zero suppressed, allowing for straightforwa… ▽ More The ARIADNE Experiment, utilising a 1-ton dual-phase Liquid Argon Time Projection Chamber (LArTPC), aims to develop and mature optical readout technology for large scale LAr detectors. This paper describes the characterisation, using cosmic muons, of a Timepix3-based camera mounted on the ARIADNE detector. The raw data from the camera are natively 3D and zero suppressed, allowing for straightforward event reconstruction, and a gallery of reconstructed LAr interaction events is presented. Taking advantage of the 1.6 ns time resolution of the readout, the drift velocity of the ionised electrons in LAr was determined to be 1.608 \pm 0.005 mm/μs at 0.54 kV/cm. Energy calibration and resolution were determined using through-going muons. The energy resolution was found to be approximately 11 % for the presented dataset. A preliminary study of the energy deposition (dE/dx) as a function of distance has also been performed for two stopping muon events, and comparison to GEANT4 simulation shows good agreement. The results presented demonstrate the capabilities of this technology, and its application is discussed in the context of the future kiloton-scale dual-phase LAr detectors that will be used in the DUNE programme. △ Less

Submitted 1 December, 2020; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: Paper published to MDPI Instruments

Linking Machine Learning with Multiscale Numerics: Data-Driven Discovery of Homogenized Equations

Authors: Hassan Arbabi, Judith E. Bunder, Giovanni Samaey, Anthony J. Roberts, Ioannis G. Kevrekidis

Abstract: The data-driven discovery of partial differential equations (PDEs) consistent with spatiotemporal data is experiencing a rebirth in machine learning research. Training deep neural networks to learn such data-driven partial differential operators requires extensive spatiotemporal data. For learning coarse-scale PDEs from computational fine-scale simulation data, the training data collection process… ▽ More The data-driven discovery of partial differential equations (PDEs) consistent with spatiotemporal data is experiencing a rebirth in machine learning research. Training deep neural networks to learn such data-driven partial differential operators requires extensive spatiotemporal data. For learning coarse-scale PDEs from computational fine-scale simulation data, the training data collection process can be prohibitively expensive. We propose to transformatively facilitate this training data collection process by linking machine learning (here, neural networks) with modern multiscale scientific computation (here, equation-free numerics). These equation-free techniques operate over sparse collections of small, appropriately coupled, space-time subdomains ("patches"), parsimoniously producing the required macro-scale training data. Our illustrative example involves the discovery of effective homogenized equations in one and two dimensions, for problems with fine-scale material property variations. The approach holds promise towards making the discovery of accurate, macro-scale effective materials PDE models possible by efficiently summarizing the physics embodied in "the best" fine-scale simulation models available. △ Less

Submitted 24 August, 2020; originally announced August 2020.

MSC Class: 35B27

Journal ref: JOM 2020

Light Dark Matter Search with a High-Resolution Athermal Phonon Detector Operated Above Ground

Authors: I. Alkhatib, D. W. P. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, R. Chen , et al. (99 additional authors not shown)

Abstract: We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matte… ▽ More We present limits on spin-independent dark matter-nucleon interactions using a $10.6$ $\mathrm{g}$ Si athermal phonon detector with a baseline energy resolution of $σ_E=3.86 \pm 0.04$ $(\mathrm{stat.})^{+0.19}_{-0.00}$ $(\mathrm{syst.})$ $\mathrm{eV}$. This exclusion analysis sets the most stringent dark matter-nucleon scattering cross-section limits achieved by a cryogenic detector for dark matter particle masses from $93$ to $140$ $\mathrm{MeV}/c^2$, with a raw exposure of $9.9$ $\mathrm{g}\cdot\mathrm{d}$ acquired at an above-ground facility. This work illustrates the scientific potential of detectors with athermal phonon sensors with eV-scale energy resolution for future dark matter searches. △ Less

Submitted 12 October, 2021; v1 submitted 21 July, 2020; originally announced July 2020.

Comments: 7 pages, 4 figures, this version includes ancillary files from official data release

Journal ref: Phys. Rev. Lett. 127, 061801 (2021)

Equation-free patch scheme for efficient computational homogenisation via self-adjoint coupling

Authors: J. E. Bunder, I. G. Kevrekidis, A. J. Roberts

Abstract: Equation-free macroscale modelling is a systematic and rigorous computational methodology for efficiently predicting the dynamics of a microscale system at a desired macroscale system level. In this scheme, the given microscale model is computed in small patches spread across the space-time domain, with patch coupling conditions bridging the unsimulated space. For accurate simulations, care must b… ▽ More Equation-free macroscale modelling is a systematic and rigorous computational methodology for efficiently predicting the dynamics of a microscale system at a desired macroscale system level. In this scheme, the given microscale model is computed in small patches spread across the space-time domain, with patch coupling conditions bridging the unsimulated space. For accurate simulations, care must be taken in designing the patch coupling conditions. Here we construct novel coupling conditions which preserve translational invariance, rotational invariance, and self-adjoint symmetry, thus guaranteeing that conservation laws associated with these symmetries are preserved in the macroscale simulation. Spectral and algebraic analyses of the proposed scheme in both one and two dimensions reveal mechanisms for further improving the accuracy of the simulations. Consistency of the patch scheme's macroscale dynamics with the original microscale model is proved. This new self-adjoint patch scheme provides an efficient, flexible, and accurate computational homogenisation in a wide range of multiscale scenarios of interest to scientists and engineers. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Multiple Tunable Hyperbolic Resonances in Broadband Infrared Carbon-Nanotube Metamaterials

Authors: John Andris Roberts, Po-Hsun Ho, Shang-Jie Yu, Xiangjin Wu, Yue Luo, William L. Wilson, Abram L. Falk, Jonathan A. Fan

Abstract: Aligned, densely-packed carbon nanotube metamaterials prepared using vacuum filtration are an emerging infrared nanophotonic material. We report multiple hyperbolic plasmon resonances, together spanning the mid-infrared, in individual resonators made from aligned and densely-packed carbon nanotubes. In the first near-field scanning optical microscopy (NSOM) imaging study of nanotube metamaterial r… ▽ More Aligned, densely-packed carbon nanotube metamaterials prepared using vacuum filtration are an emerging infrared nanophotonic material. We report multiple hyperbolic plasmon resonances, together spanning the mid-infrared, in individual resonators made from aligned and densely-packed carbon nanotubes. In the first near-field scanning optical microscopy (NSOM) imaging study of nanotube metamaterial resonators, we observe distinct deeply-subwavelength field profiles at the fundamental and higher-order resonant frequencies. The wafer-scale area of the nanotube metamaterials allows us to combine this near-field imaging with a systematic far-field spectroscopic study of the scaling properties of many resonator arrays. Thorough theoretical modeling agrees with these measurements and identifies the resonances as higher-order Fabry-Pérot (FP) resonances of hyperbolic waveguide modes. Nanotube resonator arrays show broadband extinction from 1.5-10 μm and reversibly switchable extinction in the 3-5 μm atmospheric transparency window through the coexistence of multiple modes in individual ribbons. Broadband carbon nanotube metamaterials supporting multiple resonant modes are a promising candidate for ultracompact absorbers, tunable thermal emitters, and broadband sensors in the mid-infrared. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. Applied 14, 044006 (2020)

Thermal Conductivity Measurement of Supported Thin Film Materials Using the 3$ω$ method

Authors: Daxi Zhang, Amir Behbahanian, Nicholas A. Roberts

Abstract: In this article, we are proposing a thorough analysis of the cross, and the in-plane thermal conductivity of thin-film materials based on the 3$ω$ method. The analysis accommodates a 2D mathematical heat transfer model of a semi-infinite body and the details of the sample preparation followed by the measurement process. The presented mathematical model for the system considers a two-dimensional sp… ▽ More In this article, we are proposing a thorough analysis of the cross, and the in-plane thermal conductivity of thin-film materials based on the 3$ω$ method. The analysis accommodates a 2D mathematical heat transfer model of a semi-infinite body and the details of the sample preparation followed by the measurement process. The presented mathematical model for the system considers a two-dimensional space for its solution. It enables the calculation of the cross-plane thermal conductivity with a single frequency measurement, the derived equation opens new opportunities for frequency-based and penetration-depth dependent thermal conductivity analysis. The derived equation for the in-plane thermal conductivity is dependent on the cross-plane thermal conductivity. Both in and cross-plane thermal conductivities enable the measurements in two steps of measurements, the resistance-temperature slope measurement and another set of measures that extracts the third harmonic of the voltage signal. We evaluated the methodology in two sets of samples, silicon nitride and boron nitride, both on silicon wafers. We observed anisotropic thermal conductivity in the cross and the in-plane direction, despite the isotropic nature of the thin films, which we relate to the total anisotropy of the thin film-substrate system. The technique is conducive to the thermal analysis of next-generation nanoelectronic devices. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: 12 pages, 10 figures

Constraints on low-mass, relic dark matter candidates from a surface-operated SuperCDMS single-charge sensitive detector

Authors: SuperCDMS Collaboration, D. W. Amaral, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S. Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, R. Chen, N. Chott, J. Cooley , et al. (94 additional authors not shown)

Abstract: This article presents an analysis and the resulting limits on light dark matter inelastically scattering off of electrons, and on dark photon and axion-like particle absorption, using a second-generation SuperCDMS high-voltage eV-resolution detector. The 0.93 gram Si detector achieved a 3 eV phonon energy resolution; for a detector bias of 100 V, this corresponds to a charge resolution of 3% of a… ▽ More This article presents an analysis and the resulting limits on light dark matter inelastically scattering off of electrons, and on dark photon and axion-like particle absorption, using a second-generation SuperCDMS high-voltage eV-resolution detector. The 0.93 gram Si detector achieved a 3 eV phonon energy resolution; for a detector bias of 100 V, this corresponds to a charge resolution of 3% of a single electron-hole pair. The energy spectrum is reported from a blind analysis with 1.2 gram-days of exposure acquired in an above-ground laboratory. With charge carrier trapping and impact ionization effects incorporated into the dark matter signal models, the dark matter-electron cross section $\barσ_{e}$ is constrained for dark matter masses from 0.5--$10^{4} $MeV$/c^{2}$; in the mass range from 1.2--50 eV$/c^{2}$ the dark photon kinetic mixing parameter $\varepsilon$ and the axioelectric coupling constant $g_{ae}$ are constrained. The minimum 90% confidence-level upper limits within the above mentioned mass ranges are $\barσ_{e}\,=\,8.7\times10^{-34}$ cm$^{2}$, $\varepsilon\,=\,3.3\times10^{-14}$, and $g_{ae}\,=\,1.0\times10^{-9}$. △ Less

Submitted 29 January, 2021; v1 submitted 28 May, 2020; originally announced May 2020.

Comments: 5 pages + title and references, 3 figures and 1 table

Journal ref: Phys. Rev. D 102, 091101 (2020)

Large-scale simulation of shallow water waves with computation only on small staggered patches

Authors: J. E. Bunder, J. Divahar, Ioannis G. Kevrekidis, Trent W. Mattner, A. J. Roberts

Abstract: The multiscale patch scheme is built from given small micro-scale simulations of complicated physical processes to empower large macro-scale simulations. By coupling small patches of simulations over unsimulated spatial gaps, large savings in computational time are possible. Here we discuss generalising the patch scheme to the case of wave systems on staggered grids in 2D space. Classic macro-scal… ▽ More The multiscale patch scheme is built from given small micro-scale simulations of complicated physical processes to empower large macro-scale simulations. By coupling small patches of simulations over unsimulated spatial gaps, large savings in computational time are possible. Here we discuss generalising the patch scheme to the case of wave systems on staggered grids in 2D space. Classic macro-scale interpolation provides a generic coupling between patches that achieves arbitrarily high order consistency between the emergent macro-scale simulation and the underlying micro-scale dynamics. Eigen-analysis indicates that the resultant scheme empowers feasible computation of large macro-scale simulations of wave systems even with complicated underlying physics. As examples we use the scheme to simulate some wave scenarios via a turbulent shallow water model. △ Less

Submitted 16 December, 2019; originally announced December 2019.

Measures of Scale Dependent Alfvénicity in the First PSP Solar Encounter

Authors: T. N. Parashar, M. L. Goldstein, B. A. Maruca, W. H. Matthaeus, D. Ruffolo, R. Bandyopadhyay, R. Chhiber, A. Chasapis, R. Qudsi, D. Vech, D. A. Roberts, S. D. Bale, J. W. Bonnell, T. Dudok de Wit, K. Goetz, P. R. Harvey, R. J. MacDowall, D. Malaspina, M. Pulupa, J. C. Kasper, K. E. Korreck, A. W. Case, M. Stevens, P. Whittlesey, D. Larson , et al. (3 additional authors not shown)

Abstract: The solar wind shows periods of highly Alfvénic activity, where velocity fluctuations and magnetic fluctuations are aligned or anti-aligned with each other. It is generally agreed that solar wind plasma velocity and magnetic field fluctuations observed by Parker Solar Probe (PSP) during the first encounter are mostly highly Alfvénic. However, quantitative measures of Alfvénicity are needed to unde… ▽ More The solar wind shows periods of highly Alfvénic activity, where velocity fluctuations and magnetic fluctuations are aligned or anti-aligned with each other. It is generally agreed that solar wind plasma velocity and magnetic field fluctuations observed by Parker Solar Probe (PSP) during the first encounter are mostly highly Alfvénic. However, quantitative measures of Alfvénicity are needed to understand how the characterization of these fluctuations compares with standard measures from prior missions in the inner and outer heliosphere, in fast wind and slow wind, and at high and low latitudes. To investigate this issue, we employ several measures to quantify the extent of Alfvénicity -- the Alfvén ratio $r_A$, {normalized} cross helicity $σ_c$, {normalized} residual energy $σ_r$, and the cosine of angle between velocity and magnetic fluctuations $\cosθ_{vb}$. We show that despite the overall impression that the Alfvénicity is large in the solar wind sampled by PSP during the first encounter, during some intervals the cross helicity starts decreasing at very large scales. These length-scales (often $> 1000 d_i$) are well inside inertial range, and therefore, the suppression of cross helicity at these scales cannot be attributed to kinetic physics. This drop at large scales could potentially be explained by large-scale shears present in the inner heliosphere sampled by PSP. In some cases, despite the cross helicity being constant down to the noise floor, the residual energy decreases with scale in the inertial range. These results suggest that it is important to consider all these measures to quantify Alfvénicity. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Comments: Submitted to special issue of ApJ for Parker Solar Probe

Constraints on dark photons and axion-like particles from SuperCDMS Soudan

Authors: SuperCDMS Collaboration, T. Aralis, T. Aramaki, I. J. Arnquist, E. Azadbakht, W. Baker, S. Banik, D. Barker, C. Bathurst, D. A. Bauer, L. V. S Bezerra, R. Bhattacharyya, T. Binder, M. A. Bowles, P. L. Brink, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, J. Cooley, H. Coombes, J. Corbett , et al. (82 additional authors not shown)

Abstract: We present an analysis of electron recoils in cryogenic germanium detectors operated during the SuperCDMS Soudan experiment. The data are used to set new constraints on the axioelectric coupling of axion-like particles and the kinetic mixing parameter of dark photons, assuming the respective species constitutes all of the galactic dark matter. This study covers the mass range from 40 eV/$c^2$ to 5… ▽ More We present an analysis of electron recoils in cryogenic germanium detectors operated during the SuperCDMS Soudan experiment. The data are used to set new constraints on the axioelectric coupling of axion-like particles and the kinetic mixing parameter of dark photons, assuming the respective species constitutes all of the galactic dark matter. This study covers the mass range from 40 eV/$c^2$ to 500 eV/$c^2$ for both candidates, excluding previously untested parameter space for masses below ~1 keV/$c^2$. For the kinetic mixing of dark photons, values below $10^{-15}$ are reached for particle masses around 100 eV/$c^2$; for the axioelectric coupling of axion-like particles, values below $10^{-12}$ are reached for particles with masses in the range of a few-hundred eV/$c^2$. △ Less

Submitted 18 January, 2021; v1 submitted 26 November, 2019; originally announced November 2019.

Comments: 14 pages, 10 figures, 1 page correction included with 3 figures

Journal ref: Phys. Rev. D 101, 052008 (2020)

ARIADNE -- A Novel Optical LArTPC: Technical Design Report and Initial Characterisation using a Secondary Beam from the CERN PS and Cosmic Muons

Authors: D. Hollywood, K. Majumdar, K. Mavrokoridis, K. J. McCormick, B. Philippou, S. Powell, A. Roberts, N. A. Smith, G. Stavrakis, C. Touramanis, J. Vann

Abstract: ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is… ▽ More ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is demonstrated. Optical readout has the potential to be a cost effective alternative to charge readout in future LArTPCs. In this paper, the technical design of the detector is detailed. Results of mixed particle detection using a secondary beam from the CERN PS (representing the first ever optical images of argon interactions in a dual-phase LArTPC at a beamline) and cosmic muon detection at the University of Liverpool are also presented. △ Less

Submitted 3 March, 2020; v1 submitted 8 October, 2019; originally announced October 2019.

Comments: 58 pages, 40 figures. Changes from previous version based on pre-publication review: improved quality of various figures, improved clarity of some definitions and reduced longer sentences for better readability, fixed typos and formatting errors

Journal ref: JINST 15 (2020) P03003

Magnetic and Electric Mie-Exciton Polaritons in Silicon Nanodisks

Authors: Francesco Todisco, Radu Malureanu, Christian Wolff, P. A. D. Gonçalves, Alexander S. Roberts, N. Asger Mortensen, Christos Tserkezis

Abstract: Light-matter interactions at the nanoscale constitute a fundamental ingredient for engineering applications in nanophotonics and quantum optics. To this regard electromagnetic Mie resonances excited in high-refractive index dielectric nanoparticles have recently attracted interest because of their lower losses and better control over the scattering patterns compared to their plasmonic metallic cou… ▽ More Light-matter interactions at the nanoscale constitute a fundamental ingredient for engineering applications in nanophotonics and quantum optics. To this regard electromagnetic Mie resonances excited in high-refractive index dielectric nanoparticles have recently attracted interest because of their lower losses and better control over the scattering patterns compared to their plasmonic metallic counterparts. The emergence of several resonances in those systems results in an overall high complexity, where the electric and magnetic dipoles have significant overlap in the case of spherical symmetry, thus concealing the contributions of each resonance separately. Here we show, experimentally and theoretically, the emergence of strong light-matter coupling between the magnetic and electric-dipole resonances of individual silicon nanodisks coupled to a J-aggregated organic semiconductor resonating at optical frequencies, evidencing how the different properties of the two resonances results in two different coupling strengths. The energy splittings observed are of the same order of magnitude as in similar plasmonic systems, thus confirming dielectric nanoparticles as promising alternatives for localized strong coupling studies. The coupling of both the electric and magnetic dipole resonances can offer interesting possibilities for the control of directional light scattering in the strong-coupling regime and the dynamic tuning of nanoscale light-matter coupled states by external fields. △ Less

Submitted 24 June, 2019; originally announced June 2019.

Journal ref: Nanophotonics 9, 803 (2020)

Deformable Slice-to-Volume Registration for Motion Correction in Fetal Body MRI

Authors: Alena Uus, Tong Zhang, Laurence H. Jackson, Thomas A. Roberts, Mary A. Rutherford, Joseph V. Hajnal, Maria Deprez

Abstract: In in-utero MRI, motion correction for fetal body and placenta poses a particular challenge due to the presence of local non-rigid transformations of organs caused by bending and stretching. The existing slice-to-volume registration (SVR) reconstruction methods are widely employed for motion correction of fetal brain that undergoes only rigid transformation. However, for reconstruction of fetal bo… ▽ More In in-utero MRI, motion correction for fetal body and placenta poses a particular challenge due to the presence of local non-rigid transformations of organs caused by bending and stretching. The existing slice-to-volume registration (SVR) reconstruction methods are widely employed for motion correction of fetal brain that undergoes only rigid transformation. However, for reconstruction of fetal body and placenta, rigid registration cannot resolve the issue of misregistrations due to deformable motion, resulting in degradation of features in the reconstructed volume. We propose a Deformable SVR (DSVR), a novel approach for non-rigid motion correction of fetal MRI based on a hierarchical deformable SVR scheme to allow high resolution reconstruction of the fetal body and placenta. Additionally, a robust scheme for structure-based rejection of outliers minimises the impact of registration errors. The improved performance of DSVR in comparison to SVR and patch-to-volume registration (PVR) methods is quantitatively demonstrated in simulated experiments and 20 fetal MRI datasets from 28-31 weeks gestational age (GA) range with varying degree of motion corruption. In addition, we present qualitative evaluation of 100 fetal body cases from 20-34 weeks GA range. △ Less

Submitted 28 February, 2020; v1 submitted 20 June, 2019; originally announced June 2019.

Acceleration of the Power Method with Dynamic Mode Decomposition

Authors: Jeremy A. Roberts, Leidong Xu, Rabab Elzohery, Mohammad Abdo

Abstract: Presented is an algorithm based on dynamic mode decomposition (DMD) for acceleration of the power method (PM). The power method is a simple technique for determining the dominant eigenmode of an operator $\mathbf{A}$, and variants of the power method are widely used in reactor analysis. Dynamic mode decomposition is an algorithm for decomposing a time-series of spatially-dependent data and produci… ▽ More Presented is an algorithm based on dynamic mode decomposition (DMD) for acceleration of the power method (PM). The power method is a simple technique for determining the dominant eigenmode of an operator $\mathbf{A}$, and variants of the power method are widely used in reactor analysis. Dynamic mode decomposition is an algorithm for decomposing a time-series of spatially-dependent data and producing an explicit-in-time reconstruction for that data. By viewing successive power-method iterates as snapshots of a time-varying system tending toward a steady state, DMD can be used to predict that steady state using (a sometime surprisingly small) $n$ iterates. The process of generating snapshots with the power method and extrapolating forward with DMD can be repeated. The resulting restarted, DMD-accelerated power method (or DMD-PM($n$)) was applied to the two-dimensional IAEA diffusion benchmark and compared to the unaccelerated power method and Arnoldi's method. Results indicate that DMD-PM($n$) can reduce the number of power iterations required by approximately a factor of 5. However, Arnoldi's method always outperformed DMD-PM($n$) for an equivalent number of matrix-vector products $\mathbf{Av}$. In other words, DMD-PM($n$) cannot compete with leading eigensolvers if one is not limited to snapshots produced by the power method. Contrarily, DMD-PM($n$) can be readily applied as a post process to existing power-method applications for which Arnoldi and similar methods are not directly applicable. A slight variation of the method was also found to produce reasonable approximations to the first and second harmonics without substantially affecting convergence of the dominant mode. △ Less

Submitted 20 April, 2019; originally announced April 2019.

Comments: 5 figures

MSC Class: 65F15

Tunable Hyperbolic Metamaterials Based on Self-Assembled Carbon Nanotubes

Authors: John Andris Roberts, Shang-Jie Yu, Po-Hsun Ho, Stefan Schoeche, Abram L. Falk, Jonathan A. Fan

Abstract: We show that packed, horizontally aligned films of single-walled carbon nanotubes are hyperbolic metamaterials with ultra-subwavelength unit cells and dynamic tunability. Using Mueller-matrix ellipsometry, we characterize the films' doping-level dependent optical properties and find a broadband hyperbolic region tunable in the mid-infrared. To characterize the dispersion of in-plane hyperbolic pla… ▽ More We show that packed, horizontally aligned films of single-walled carbon nanotubes are hyperbolic metamaterials with ultra-subwavelength unit cells and dynamic tunability. Using Mueller-matrix ellipsometry, we characterize the films' doping-level dependent optical properties and find a broadband hyperbolic region tunable in the mid-infrared. To characterize the dispersion of in-plane hyperbolic plasmon modes, we etch the nanotube films into nanoribbons with differing widths and orientations relative to the nanotube axis, and we observe that the hyperbolic modes support strong light localization. Agreement between the experiments and theoretical models using the ellipsometry data indicates that the packed carbon nanotubes support bulk anisotropic responses at the nanoscale. Self-assembled films of carbon nanotubes are well suited for applications in thermal emission and photodetection, and they serve as model systems for studying light-matter interactions in the deep subwavelength regime. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Near-perfect absorber as a subwavelength thickness spatial frequency filter for optical image processing

Authors: Lukas Wesemann, Evgeniy Panchenko, Kalpana Singh, Enrico Della Gaspera, Daniel E. Gomez, Timothy J. Davis, Ann Roberts

Abstract: Spatial frequency filtering is a fundamental enabler of information processing methods in biological and technical imaging. Most filtering methods, however, require either bulky and expensive optical equipment or some degree of computational processing. Here we experimentally demonstrate on-chip, all-optical spatial frequency filtering using a thin-film perfect absorber structure. We give examples… ▽ More Spatial frequency filtering is a fundamental enabler of information processing methods in biological and technical imaging. Most filtering methods, however, require either bulky and expensive optical equipment or some degree of computational processing. Here we experimentally demonstrate on-chip, all-optical spatial frequency filtering using a thin-film perfect absorber structure. We give examples of edge enhancement in an amplitude image as well as conversion of a phase gradient in a wave field into an intensity modulation. △ Less

Submitted 14 February, 2019; originally announced February 2019.

Comments: 9 pages, 7 figures

MSC Class: 78-05

Monitoring Reactor Anti-Neutrinos Using a Plastic Scintillator Detector in a Mobile Laboratory

Authors: J. Carroll, J. Coleman, G. Davies, M. Lockwood, C. Metelko, R. Mills, M. Murdoch, A. Roberts, Y. Schnellbach, C. Touramanis

Abstract: Technology developed for the T2K electromagnetic calorimeter has been adapted to make a small footprint, reliable, segmented detector to characterise anti-neutrinos emitted by nuclear reactors. The device has been developed and demonstrated by the University of Liverpool and underwent field tests at the Wylfa Magnox Reactor on Anglesey, UK. It was situated in a 20\,ft ISO shipping container, above… ▽ More Technology developed for the T2K electromagnetic calorimeter has been adapted to make a small footprint, reliable, segmented detector to characterise anti-neutrinos emitted by nuclear reactors. The device has been developed and demonstrated by the University of Liverpool and underwent field tests at the Wylfa Magnox Reactor on Anglesey, UK. It was situated in a 20\,ft ISO shipping container, above ground, roughly 60\,m from the 1.5\,\GWt\ reactor core. Based on the design of the T2K Near Detector ECal, the device detects anti-neutrinos through the distinctive delayed coincidence signal of inverse $β$-decay interactions using extruded plastic scintillator and Hamamatsu Multi-Pixel Photon Counters. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Ultra-thin titanium nitride films for refractory spectral selectivity

Authors: Alexander S. Roberts, Manohar Chirumamilla, Deyong Wang, Liqiong An, Kjeld Pedersen, N. Asger Mortensen, Sergey I. Bozhevolnyi

Abstract: We demonstrate a selectively emitting optical Fabry-Pérot resonator based on a few-nm-thin continuous metallic titanium nitride film, separated by a dielectric spacer from an optically thick titanium nitride back-reflector, which exhibits excellent stability at 1070 K against chemical degradation, thin-film instabilities and melting point depression. The structure paves the way to the design and f… ▽ More We demonstrate a selectively emitting optical Fabry-Pérot resonator based on a few-nm-thin continuous metallic titanium nitride film, separated by a dielectric spacer from an optically thick titanium nitride back-reflector, which exhibits excellent stability at 1070 K against chemical degradation, thin-film instabilities and melting point depression. The structure paves the way to the design and fabrication of refractory thermal emitters using the well-established processes known from the field of multilayer and rugate optical filters. We demonstrate that a few-nanometer thick films of titanium nitride can be stable under operation at temperatures exceeding 1070 K. This type of selective emitter provides a means towards near-infrared thermal emission that could potentially be tailored to the accuracy level known from rugate optical filters. △ Less

Submitted 29 October, 2018; originally announced October 2018.

Comments: 16 pages, 6 figures

Journal ref: Optical Materials Express 8, 3717 (2018)