-
On-chip transfer of ultrashort graphene plasmon wavepackets using terahertz electronics
Authors:
Katsumasa Yoshioka,
Guillaume Bernard,
Taro Wakamura,
Masayuki Hashisaka,
Ken-ichi Sasaki,
Satoshi Sasaki,
Kenji Watanabe,
Takashi Taniguchi,
Norio Kumada
Abstract:
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulat…
▽ More
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulating, and reading out terahertz graphene plasmon-polariton wavepackets on-chip. By injecting an electrical pulse into graphene via an ohmic contact, we achieve coherent conversion of the pulse into a plasmon wavepacket exhibiting a pulse duration of 1.2 ps and extreme three-dimensional spatial confinement within a volume of $2.1 \times 10^{-18} m^3$. We reveal the transport properties of plasmons along graphene ribbons in different dielectric environments, providing a basis for designing graphene plasmonic circuits. Furthermore, we find that the conversion efficiency between the electrical pulses and plasmon wavepackets reaches ~30% thanks to the absence of a momentum mismatch. With unprecedented controllability, our platform represents a significant advance in on-chip handling of plasmonic signals in various van der Waals heterostructures.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
Determination of Complex Refractive Index using Maximum Deviation Angle through Prism
Authors:
Shosuke Sasaki
Abstract:
Light-absorbing materials are widely used, and their optical properties are an important factor. Snell's law does not hold in materials that partially absorb light. Hence, the optical path in refraction is calculated from Maxwell's law. We used it to obtain the deviation angle when a light passes through a prism made of light absorbing material. As a result, the deviation angle has a local maximum…
▽ More
Light-absorbing materials are widely used, and their optical properties are an important factor. Snell's law does not hold in materials that partially absorb light. Hence, the optical path in refraction is calculated from Maxwell's law. We used it to obtain the deviation angle when a light passes through a prism made of light absorbing material. As a result, the deviation angle has a local maximum point. The deviation angle near the local maximum is sensitive to the real and imaginary parts of the refractive index. The local maximum deviation angle and its incident angle are used to determine the complex index of refraction. This measurement has the same advantages as measuring the minimum deviation angle of a transparent prism. That is, when the optical bench is slightly rotated and the measurement light is observed, the moving direction of the light-spot is reversed at the extreme value. The detection is easy. Then, it is necessary to determine the complex refractive index from the measured local maximum deviation angle and its incident angle. These two angles are plotted parametrically by varying the real part of the refractive index under a fixed imaginary part. The similar curves are drawn under the fixed real parts. Each curve has a fixed value for the real or imaginary parts of the refractive index. Drawings of these many curves are made prior to measurement. Then we select the four curves that are closest to the local maximum deviation angle and its incident angle. Four fixed values attached to each of the four curves determine the complex index of refraction. Various liquids can be put in a prism container made of parallel plate glass and their local maximum deviation angles are measured. The method in this paper can easily determine the complex refractive index and can be used for material identification
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Determination of Complex Refractive Index using Prism composed of Absorbing Medium
Authors:
Shosuke Sasaki
Abstract:
In light refraction between two transparent media, Snell's law describes the relationship between the incident angle and refraction angle. The refractive index is usually determined from Snell's law using the minimum deviation angle through a prism. A medium that partially absorbs light has complex permittivity (or permeability), and its refractive index has an imaginary part. Because of the imagi…
▽ More
In light refraction between two transparent media, Snell's law describes the relationship between the incident angle and refraction angle. The refractive index is usually determined from Snell's law using the minimum deviation angle through a prism. A medium that partially absorbs light has complex permittivity (or permeability), and its refractive index has an imaginary part. Because of the imaginary part, Snell's law does not hold for light-absorbing media. Accordingly, other methods is required to determine the complex value of the refractive index in a light-absorbing medium. The exact solution of Maxwell's equations was obtained for light passing through a prism composed of a light-absorbing medium. Thereby the optical path was determined. The difference of optical paths between light-absorbing medium and transparent medium was calculated numerically. The difference is very large in the neighborhood of perfect reflection area of transparent medium. We found two methods to determine the complex value of the refractive index using the optical path. Both methods analyzed the solutions in detail for two specific incident angles. The deviation angles corresponding to the two incident angles determined the complex value of the prism's refractive index. The obtained refractive index is independent of the apex angle of the prism.
△ Less
Submitted 9 January, 2022; v1 submitted 26 December, 2021;
originally announced December 2021.
-
Analysis of Rotational Motion based on Rolling Friction Torque
Authors:
Shosuke Sasaki,
Yohe Namba,
Tadao Iwanari,
Yasuyuki Kitano
Abstract:
In the problem of cylinder rolling without slipping on a horizontal floor, both the cylinder and floor are generally treated as rigid bodies in normal textbooks. When the air resistance is ignored, the equation of motion has a solution with a constant velocity. However, in the real world, permanent motion does not occur. The difficulty cannot be solved only by the horizontal force, because a horiz…
▽ More
In the problem of cylinder rolling without slipping on a horizontal floor, both the cylinder and floor are generally treated as rigid bodies in normal textbooks. When the air resistance is ignored, the equation of motion has a solution with a constant velocity. However, in the real world, permanent motion does not occur. The difficulty cannot be solved only by the horizontal force, because a horizontal force opposite the translational direction increases the angular velocity of rotation around the center. Therefore other mechanisms need to be examined. There are two main reasons for this result. 1) Both a cylinder and a floor are not perfect circle and perfect plane, but have uneven surfaces. The micro bumps on the surface yield small collisions in the direction perpendicular to the floor. The collisions generate a rolling friction torque around the center. 2) A strong force acts on the contact part which is deformed. The high-speed deformation produces a history effect on the relationship between stress and strain, because the compressed wave in the contact part diffuses to the outside at the speed of sound. Therefore a rolling friction torque is also generated. Both torques are caused by forces perpendicular to the floor. The rolling friction torque eliminates the discrepancy between the textbook results and reality by solving the simultaneous differential equations of rotation and translation. This method is useful for studying rolling systems such as trains and cars.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Parity-dependent shot noise and spin-flip relaxation process in a hybrid superconductor-nanowire quantum dot
Authors:
Keiko Takase,
Yasuhiro Utsumi,
Yamato Ashikawa,
Guoqiang Zhang,
Kouta Tateno,
Yuma Okazaki,
Satoshi Sasaki
Abstract:
We report shot noise measurements for a quantum dot formed in an InAs nanowire suspended between superconducting electrodes. We find a clear alternation for the shot noise value in the Coulomb blockade regime between even and odd electron occupation in the dot, indicating that super-Poissonian (Poissonian) shot noise with the Fano factor reaching around 2 (1) occurs for even (odd) parity. With inc…
▽ More
We report shot noise measurements for a quantum dot formed in an InAs nanowire suspended between superconducting electrodes. We find a clear alternation for the shot noise value in the Coulomb blockade regime between even and odd electron occupation in the dot, indicating that super-Poissonian (Poissonian) shot noise with the Fano factor reaching around 2 (1) occurs for even (odd) parity. With increasing magnetic field, the parity effect disappears and all the regimes show the Fano factor of around 1. The whole observation in our experiments quantitatively agrees with simulation obtained from full-counting statistics of cotunneling including spin-flip relaxation process, which corresponds to modelling electron motion in a quantum dot with strong spin-orbit interaction.
△ Less
Submitted 29 July, 2021;
originally announced July 2021.
-
Electrical tuning of the spin-orbit interaction in nanowire by transparent ZnO gate grown by atomic layer deposition
Authors:
Keiko Takase,
Kouta Tateno,
Satoshi Sasaki
Abstract:
We develop an InAs nanowire gate-all-around field-effect transistor using a transparent conductive zinc oxide (ZnO) gate electrode, which is in-situ atomic layer deposited after growth of gate insulator of Al2O3. We perform magneto-transport measurements and find a crossover from weak localization to weak antilocalization effect with increasing gate voltage, which demonstrates that the Rashba spin…
▽ More
We develop an InAs nanowire gate-all-around field-effect transistor using a transparent conductive zinc oxide (ZnO) gate electrode, which is in-situ atomic layer deposited after growth of gate insulator of Al2O3. We perform magneto-transport measurements and find a crossover from weak localization to weak antilocalization effect with increasing gate voltage, which demonstrates that the Rashba spin-orbit coupling is tuned by the gate electrode. The efficiency of the gate tuning of the spin-orbit interaction is higher than those obtained for two-dimensional electron gas, and as high as that for a gate-all-around nanowire metal-oxide-semiconductor field-effect transistor that was previously reported. The spin-orbit interaction is discussed in line with not only conventionally used one-dimensional model but also recently proposed model that considers effects of microscopic band structures of materials.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Active spatial control of terahertz graphene plasmons by tailoring carrier density profile
Authors:
Ngoc Han Tu,
Katsumasa Yoshioka,
Satoshi Sasaki,
Makoto Takamura,
Koji Muraki,
Norio Kumada
Abstract:
Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic b…
▽ More
Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic boundaries induced by a zinc-oxide-based dual gate, which is designed to minimize the dielectric modulation. Using Fourier-transform infrared spectroscopy, we show that the plasmon reflection can be varied continuously with the carrier density difference between the adjacent regions. By utilizing this functionality, we show the ability to control size, position, and frequency of plasmon cavities. Our approach can be applied to various types of plasmonic devices, paving the way for implementing a programmable plasmonic circuit.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Beryllium Polyhydride Be4H8(H2)2 Synthesized at HP/HT
Authors:
Takahiro Matsuoka,
Hiroshi Fujihisa,
Takahiro Ishikawa,
Takaya Nakagawa,
Keiji Kuno,
Naohisa Hirao,
Yasuo Ohishi,
Katsuya Shimizu,
Shigeo Sasaki
Abstract:
We report the XRD and Raman scattering measurements in combination with DFT calculations that reveal the formation of beryllium polyhydride Be4H8(H2)2 by laser heating Be/H2 mixture to above 1700 K at pressures between 5 GPa and 8 GPa. The Be4H8(H2)2 crystallizes in a P6_3/mmc structure and consists of corner-sharing BeH4 tetrahedrons and H2 molecules that are in an interstitial site. The Be4H8(H2…
▽ More
We report the XRD and Raman scattering measurements in combination with DFT calculations that reveal the formation of beryllium polyhydride Be4H8(H2)2 by laser heating Be/H2 mixture to above 1700 K at pressures between 5 GPa and 8 GPa. The Be4H8(H2)2 crystallizes in a P6_3/mmc structure and consists of corner-sharing BeH4 tetrahedrons and H2 molecules that are in an interstitial site. The Be4H8(H2)2 is stable at least to 14 GPa on compression and stable down to 4 GPa at room temperature. Our ab-initio calculations suggest that the Be4H8(H2)2 is a meta-stable phase of Be-H system.
△ Less
Submitted 10 July, 2020; v1 submitted 4 November, 2019;
originally announced November 2019.
-
Hydrogen-Storing Salt NaCl(H$_2$) Synthesized at High Pressure and High Temperature
Authors:
Takahiro Matsuoka,
Shu Muraoka,
Takahiro Ishikawa,
Ken Niwa,
Kenji Ohta,
Naohisa Hirao,
Saori Kawaguchi,
Yasuo Ohishi,
Katsuya Shimizu,
Shigeo Sasaki
Abstract:
X-ray diffraction and Raman scattering measurements, and first-principles calculations are performed to search for the formation of NaCl-hydrogen compound. When NaCl and H$_{2}$ mixture is laser-heated to above 1500 K at pressures exceeding 40 GPa, we observed the formation of NaClH$_{\textit{x}}$ with $\textit{P}$6$_{3}$/$\textit{mmc}$ structure which accommodates H$_{2}$ molecules in the interst…
▽ More
X-ray diffraction and Raman scattering measurements, and first-principles calculations are performed to search for the formation of NaCl-hydrogen compound. When NaCl and H$_{2}$ mixture is laser-heated to above 1500 K at pressures exceeding 40 GPa, we observed the formation of NaClH$_{\textit{x}}$ with $\textit{P}$6$_{3}$/$\textit{mmc}$ structure which accommodates H$_{2}$ molecules in the interstitial sites of NaCl lattice forming ABAC stacking. Upon the decrease of pressure at 300 K, NaClH$_\textit{x}$ remains stable down to 17 GPa. Our calculations suggest the observed NaClH$_{\textit{x}}$ is NaCl(H$_{2}$). Besides, a hydrogen-richer phase NaCl(H$_{2}$)$_{4}$ is predicted to become stable at pressures above 40 GPa.
△ Less
Submitted 29 August, 2019; v1 submitted 16 July, 2019;
originally announced July 2019.
-
Measurement of the $ν_μ$ charged-current cross sections on water, hydrocarbon, iron, and their ratios with the T2K on-axis detectors
Authors:
K. Abe,
R. Akutsu,
A. Ali,
C. Andreopoulos,
L. Anthony,
M. Antonova,
S. Aoki,
A. Ariga,
Y. Ashida,
Y. Awataguchi,
Y. Azuma,
S. Ban,
M. Barbi,
G. J. Barker,
G. Barr,
C. Barry,
M. Batkiewicz-Kwasniak,
F. Bench,
V. Berardi,
S. Berkman,
R. M. Berner,
L. Berns,
S. Bhadra,
S. Bienstock,
A. Blondely
, et al. (292 additional authors not shown)
Abstract:
We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817…
▽ More
We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817$\pm 0.007$(stat.)$^{+0.11}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, and $σ^{\rm{Fe}}_{\rm{CC}}$ = (0.859$\pm 0.003$(stat.) $^{+0.12}_{-0.10}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon respectively, for a restricted phase space of induced muons: $θ_μ<45^{\circ}$ and $p_μ>$0.4 GeV/$c$ in the laboratory frame. The measured cross section ratios are ${σ^{\rm{H_{2}O}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.028$\pm 0.016$(stat.)$\pm 0.053$(syst.), ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{H_{2}O}}_{\rm{CC}}}$ = 1.023$\pm 0.012$(stat.)$\pm 0.058$(syst.), and ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.049$\pm 0.010$(stat.)$\pm 0.043$(syst.). These results, with an unprecedented precision for the measurements of neutrino cross sections on water in the studied energy region, show good agreement with the current neutrino interaction models used in the T2K oscillation analyses.
△ Less
Submitted 21 April, 2019;
originally announced April 2019.
-
Neural-network Kohn-Sham exchange-correlation potential and its out-of-training transferability
Authors:
Ryo Nagai,
Ryosuke Akashi,
Shu Sasaki,
Shinji Tsuneyuki
Abstract:
We incorporate in the Kohn-Sham self consistent equation a trained neural-network projection from the charge density distribution to the Hartree-exchange-correlation potential $n \rightarrow V_{\rm Hxc}$ for possible numerical approach to the exact Kohn-Sham scheme. The potential trained through a newly developed scheme enables us to evaluate the total energy without explicitly treating the formul…
▽ More
We incorporate in the Kohn-Sham self consistent equation a trained neural-network projection from the charge density distribution to the Hartree-exchange-correlation potential $n \rightarrow V_{\rm Hxc}$ for possible numerical approach to the exact Kohn-Sham scheme. The potential trained through a newly developed scheme enables us to evaluate the total energy without explicitly treating the formula of the exchange-correlation energy. With a case study of a simple model we show that the well-trained neural-network $V_{\rm Hxc}$ achieves accuracy for the charge density and total energy out of the model parameter range used for the training, indicating that the property of the elusive ideal functional form of $V_{\rm Hxc}$ can approximately be encapsulated by the machine-learning construction. We also exemplify a factor that crucially limits the transferability--the boundary in the model parameter space where the number of the one-particle bound states changes--and see that this is cured by setting the training parameter range across that boundary. The training scheme and insights from the model study apply to more general systems, opening a novel path to numerically efficient Kohn-Sham potential.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Twisted Radiation by Electrons in Spiral Motion
Authors:
M. Katoh,
M. Fujimoto,
N. S. Mirian,
T. Konomi,
Y. Taira,
T. Kaneyasu,
M. Hosaka,
N. Yamamoto,
A. Mochihashi,
Y. Takashima,
K. Kuroda,
A. Miyamoto,
K. Miyamoto,
S. Sasaki
Abstract:
We theoretically show that a single free electron in circular/spiral motion radiates an electromagnetic wave possessing helical phase structure and carrying orbital angular momentum. We experimentally demonstrate it by double-slit diffraction on radiation from relativistic electrons in spiral motion. We show that twisted photons should be created naturally by cyclotron/synchrotron radiations or Co…
▽ More
We theoretically show that a single free electron in circular/spiral motion radiates an electromagnetic wave possessing helical phase structure and carrying orbital angular momentum. We experimentally demonstrate it by double-slit diffraction on radiation from relativistic electrons in spiral motion. We show that twisted photons should be created naturally by cyclotron/synchrotron radiations or Compton scatterings in various situations in cosmic space. We propose promising laboratory vortex photon sources in various wavelengths ranging from radio wave to gamma-rays.
△ Less
Submitted 15 September, 2016; v1 submitted 12 September, 2016;
originally announced September 2016.
-
Design of a silica-aerogel-based cosmic dust collector for the Tanpopo mission aboard the International Space Station
Authors:
Makoto Tabata,
Eiichi Imai,
Hajime Yano,
Hirofumi Hashimoto,
Hideyuki Kawai,
Yuko Kawaguchi,
Kensei Kobayashi,
Hajime Mita,
Kyoko Okudaira,
Satoshi Sasaki,
Hikaru Yabuta,
Shin-ichi Yokobori,
Akihiko Yamagishi
Abstract:
We are developing a silica-aerogel-based cosmic dust collector for use in the Tanpopo experiment to be conducted on the International Space Station. The mass production of simple two-layer hydrophobic aerogels was undertaken in a contamination-controlled environment, yielding more than 100 undamaged products. The collector, comprising an aerogel tile and holder panel, was designed to resist launch…
▽ More
We are developing a silica-aerogel-based cosmic dust collector for use in the Tanpopo experiment to be conducted on the International Space Station. The mass production of simple two-layer hydrophobic aerogels was undertaken in a contamination-controlled environment, yielding more than 100 undamaged products. The collector, comprising an aerogel tile and holder panel, was designed to resist launch vibration and to conform to an exposure attachment. To this end, a box-framing aerogel with inner and outer densities of 0.01 and 0.03 g/cm$^3$, respectively, was fabricated. The aerogel mounted in the panel passed random vibration tests at the levels of the acceptance and qualification tests for launch. It also withstood the pressure changes expected in the airlock on the International Space Station.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Excitation of Resonators by Electron Beams
Authors:
E. G. Bessonov,
Yukio Shibata,
Satoshi Sasaki,
Kimihiro Ishi,
Mikihiko Ikezawa
Abstract:
Elements of a vector theory of open resonators and experiments on excitation of a fundamental mode with transverse and longitudinal polarization in such resonators are discussed.
Elements of a vector theory of open resonators and experiments on excitation of a fundamental mode with transverse and longitudinal polarization in such resonators are discussed.
△ Less
Submitted 14 December, 2001;
originally announced December 2001.
-
Excitation of resonators by electron beams
Authors:
Yukio Shibata,
Satoshi Sasaki,
Kimihiro Ishi,
Mikihiko Ikezawa,
E. G. Bessonov
Abstract:
In this paper the main consequences of the vector theory of excitation of resonators by particle beams are presented. Some features of excitation of broadband radiation in longitudinal modes of the enclosed and open resonators are discussed.
In this paper the main consequences of the vector theory of excitation of resonators by particle beams are presented. Some features of excitation of broadband radiation in longitudinal modes of the enclosed and open resonators are discussed.
△ Less
Submitted 16 March, 2000;
originally announced March 2000.