-
Buffer gas cooling of carbon atoms
Authors:
Takashi Sakamoto,
Kohei Suzuki,
Kosuke Yoshioka
Abstract:
We demonstrate buffer gas cooling of carbon atoms to cryogenic temperatures. By employing pulsed two-photon excitation followed by vacuum ultraviolet fluorescence detection, we measured the arrival time distribution of the ablated carbon atoms to the detection volume at various helium buffer gas densities. The experimental data, corroborated by Monte Carlo simulations, reveal a rapid decrease in t…
▽ More
We demonstrate buffer gas cooling of carbon atoms to cryogenic temperatures. By employing pulsed two-photon excitation followed by vacuum ultraviolet fluorescence detection, we measured the arrival time distribution of the ablated carbon atoms to the detection volume at various helium buffer gas densities. The experimental data, corroborated by Monte Carlo simulations, reveal a rapid decrease in the local temperature of the carbon atom gas to approximately 10~K within tens of microseconds. The findings establish a major step towards novel research utilizing cold and ultracold carbon atoms.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
On-chip transfer of ultrashort graphene plasmon wavepackets using terahertz electronics
Authors:
Katsumasa Yoshioka,
Guillaume Bernard,
Taro Wakamura,
Masayuki Hashisaka,
Ken-ichi Sasaki,
Satoshi Sasaki,
Kenji Watanabe,
Takashi Taniguchi,
Norio Kumada
Abstract:
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulat…
▽ More
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulating, and reading out terahertz graphene plasmon-polariton wavepackets on-chip. By injecting an electrical pulse into graphene via an ohmic contact, we achieve coherent conversion of the pulse into a plasmon wavepacket exhibiting a pulse duration of 1.2 ps and extreme three-dimensional spatial confinement within a volume of $2.1 \times 10^{-18} m^3$. We reveal the transport properties of plasmons along graphene ribbons in different dielectric environments, providing a basis for designing graphene plasmonic circuits. Furthermore, we find that the conversion efficiency between the electrical pulses and plasmon wavepackets reaches ~30% thanks to the absence of a momentum mismatch. With unprecedented controllability, our platform represents a significant advance in on-chip handling of plasmonic signals in various van der Waals heterostructures.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
Laser cooling of positronium
Authors:
K. Shu,
Y. Tajima,
R. Uozumi,
N. Miyamoto,
S. Shiraishi,
T. Kobayashi,
A. Ishida,
K. Yamada,
R. W. Gladen,
T. Namba,
S. Asai,
K. Wada,
I. Mochizuki,
T. Hyodo,
K. Ito,
K. Michishio,
B. E. O'Rourke,
N. Oshima,
K. Yoshioka
Abstract:
When laser radiation is skilfully applied, atoms and molecules can be cooled allowing precise measurements and control of quantum systems. This is essential in fundamental studies of physics as well as practical applications such as precision spectroscopy, quantum-statistical-property manifesting ultracold gases, and quantum computing. In laser cooling, repeated cycles of laser photon absorption a…
▽ More
When laser radiation is skilfully applied, atoms and molecules can be cooled allowing precise measurements and control of quantum systems. This is essential in fundamental studies of physics as well as practical applications such as precision spectroscopy, quantum-statistical-property manifesting ultracold gases, and quantum computing. In laser cooling, repeated cycles of laser photon absorption and direction-independent spontaneous emission can slow atoms and molecules to otherwise unattainable velocities. Simple systems can provide a rigorous testing ground for fundamental theories of physics; one such system is the purely leptonic positronium, an exotic atom of an electron and its antiparticle, the positron. However, the cooling of positronium has hitherto remained unrealised. Here, we demonstrate laser cooling of positronium. A novel laser system of a train of broadband pulses with successively increasing central frequencies was used to overcome major challenges presented by the short lifetime of positronium and the significant Doppler broadening and recoil as a consequence of its very light mass. One-dimensional chirp cooling of the dilute positronium gas in a counter-propagating configuration gave a final velocity distribution corresponding to approximately 1 K in a short time of 100 ns. This study on a pure leptonic system is a major step in the field of low-temperature fundamental physics of antimatter, and is complementary to the laser cooling of antihydrogen, a hadron-containing exotic atom. Progress in this field is vital in elucidating the origin of the matter-antimatter asymmetry in the universe. The application of laser cooling to positronium may afford a unique opportunity to rigorously test bound-state quantum electrodynamics. Moreover, laser cooling of positronium is key to the realisation of Bose-Einstein condensation in this matter-antimatter system.
△ Less
Submitted 15 October, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Development of an optimal laser for chirp cooling of positronium based on chirped pulse-train generator
Authors:
Kenji Shu,
Naoki Miyamoto,
Yuto Motohashi,
Ryosuke Uozumi,
Yohei Tajima,
Kosuke Yoshioka
Abstract:
We report the development and characterization of a pulsed 243 nm laser that is optimal for the cooling of positronium (Ps). The laser, which is based on the recent chirped pulse-train generator (CPTG) demonstrated by K. Yamada et al. (Phys. Rev. Appl. 16, 014009 (2021)), was designed to output a train of pulses with linewidths of 10 GHz, and with the center frequency of each pulse shifting upward…
▽ More
We report the development and characterization of a pulsed 243 nm laser that is optimal for the cooling of positronium (Ps). The laser, which is based on the recent chirped pulse-train generator (CPTG) demonstrated by K. Yamada et al. (Phys. Rev. Appl. 16, 014009 (2021)), was designed to output a train of pulses with linewidths of 10 GHz, and with the center frequency of each pulse shifting upward (up-chirped) in time by $4.9\times10^2\,\mathrm{GHz\,μs^{-1}}$. These parameters were determined by the mechanism of chirp cooling, which is the best scheme for cooling many Ps atoms to the recoil temperature of laser cooling. To achieve the designed performance, we drove an optical phase modulator in the CPTG with a deep modulation depth based on the operating principle of the cooling laser. Time-resolved spectroscopic measurements confirmed that the developed laser satisfied the chirp rate and linewidth requirements for efficient chirp cooling. Combined with pulse energy of hundreds of microjoules, we believe that the experimental demonstration of Ps laser cooling has become possible using realistic methods for the generation and velocity measurement of Ps.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Dual optical frequency combs with ultra-low relative phase jitters from 550 nm to 1020 nm for precision spectroscopy
Authors:
Eunmi Chae,
Kota Nakashima,
Kosuke Yoshioka
Abstract:
Here, ultra-low relative phase jitters over a wide optical spectrum were achieved for dual Ti:Sapphire optical frequency combs. The two optical frequency combs were independently phase-locked to a Sr optical lattice clock laser delivered through a commercial optical fiber network. We confirmed that the relative phase jitters between the two combs integrated from 8.3 mHz to 200 kHz were below 1 rad…
▽ More
Here, ultra-low relative phase jitters over a wide optical spectrum were achieved for dual Ti:Sapphire optical frequency combs. The two optical frequency combs were independently phase-locked to a Sr optical lattice clock laser delivered through a commercial optical fiber network. We confirmed that the relative phase jitters between the two combs integrated from 8.3 mHz to 200 kHz were below 1 rad, corresponding to a relative linewidth of below 8.3 mHz, over the entire wavelength of the optical frequency combs ranging from 550 nm to 1020 nm. Our work paves the way for ultrahigh-precision dual-comb spectroscopy covering a wide optical spectral range with a simple setup, and provides an absolute optical frequency reference with great stability over a wide range of wavelengths.
△ Less
Submitted 18 March, 2022;
originally announced March 2022.
-
Ultrafast intrinsic optical-to-electrical conversion dynamics in graphene photodetector
Authors:
Katsumasa Yoshioka,
Taro Wakamura,
Masayuki Hashisaka,
Kenji Watanabe,
Takashi Taniguchi,
Norio Kumada
Abstract:
Optical-to-electrical (O-E) conversion in graphene is a central phenomenon for realizing anticipated ultrafast and low-power-consumption information technologies. However, revealing its mechanism and intrinsic time scale require uncharted terahertz (THz) electronics and device architectures. Here, we succeeded in resolving O-E conversion processes in high-quality graphene by on-chip electrical rea…
▽ More
Optical-to-electrical (O-E) conversion in graphene is a central phenomenon for realizing anticipated ultrafast and low-power-consumption information technologies. However, revealing its mechanism and intrinsic time scale require uncharted terahertz (THz) electronics and device architectures. Here, we succeeded in resolving O-E conversion processes in high-quality graphene by on-chip electrical readout of ultrafast photothermoelectric current. By suppressing the RC time constant using a resistive zinc oxide top gate, we constructed a gate-tunable graphene photodetector with a bandwidth of up to 220 GHz. By measuring nonlocal photocurrent dynamics, we found that the photocurrent extraction from the electrode is instantaneous without a measurable carrier transit time across several-micrometer-long graphene, following the Shockley-Ramo theorem. The time for photocurrent generation is exceptionally tunable from immediate to > 4 ps, and its origin is identified as Fermi-level-dependent intraband carrier-carrier scattering. Our results bridge the gap between ultrafast optical science and device engineering, accelerating ultrafast graphene optoelectronic applications.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
A compact green Ti:Sapphire astro-comb with 43-GHz repetition frequency
Authors:
Eunmi Chae,
Eiji Kambe,
Kentaro Motohara,
Hideyuki Izumiura,
Mamoru Doi,
Kosuke Yoshioka
Abstract:
A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linew…
▽ More
A compact green astro-comb with 43-GHz repetition rate is developed based on a Ti:Sapphire optical frequency comb (OFC) and a mode-selecting cavity. The OFC's large repetition rate of 1.6 GHz eases the requirements for the mode-selecting cavity. Unnecessary frequency-modes of the OFC are suppressed down to $5 \times 10^{-4}$ at 535 nm - 550 nm using a single mode-selecting cavity with 70-MHz linewidth. The radial velocity precision $σ\sim 1.4$ m/s is achieved at the High Dispersion Echelle Spectrosraph for the Okayama 188-cm telescope of the National Astronomical Observatory of Japan using our astro-comb. With further improvements of the mode-selecting cavity and removal of fiber modal noises, our system will provide a simple, compact, and precise astro-comb setup in visible wavelength region.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.
-
Demonstration of wideband metal mesh filters for submillimeter astrophysics using flexible printed circuits
Authors:
Shinsuke Uno,
Tatsuya Takekoshi,
Tai Oshima,
Keisuke Yoshioka,
Kah Wuy Chin,
Kotaro Kohno
Abstract:
We developed a wideband quasi-optical band-pass filter covering 170-520 GHz by exploiting the recent advancements in commercially available flexible printed circuit (FPC) fabrication technologies. We designed and fabricated a three-layered stack of loaded hexagonal grid metal meshes using a copper pattern with a narrowest linewidth of $50~μ\mathrm{m}$ on a polyimide substrate. The measured frequen…
▽ More
We developed a wideband quasi-optical band-pass filter covering 170-520 GHz by exploiting the recent advancements in commercially available flexible printed circuit (FPC) fabrication technologies. We designed and fabricated a three-layered stack of loaded hexagonal grid metal meshes using a copper pattern with a narrowest linewidth of $50~μ\mathrm{m}$ on a polyimide substrate. The measured frequency pass-band shape was successfully reproduced through a numerical simulation using a set of parameters consistent with the dimensions of the fabricated metal meshes. FPC-based metal mesh filters will provide a new pathway toward the on-demand development of millimeter/submillimeter-wave quasi-optical filters at low cost and with a short turnaround time.
△ Less
Submitted 30 March, 2020;
originally announced March 2020.
-
Active spatial control of terahertz graphene plasmons by tailoring carrier density profile
Authors:
Ngoc Han Tu,
Katsumasa Yoshioka,
Satoshi Sasaki,
Makoto Takamura,
Koji Muraki,
Norio Kumada
Abstract:
Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic b…
▽ More
Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic boundaries induced by a zinc-oxide-based dual gate, which is designed to minimize the dielectric modulation. Using Fourier-transform infrared spectroscopy, we show that the plasmon reflection can be varied continuously with the carrier density difference between the adjacent regions. By utilizing this functionality, we show the ability to control size, position, and frequency of plasmon cavities. Our approach can be applied to various types of plasmonic devices, paving the way for implementing a programmable plasmonic circuit.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Geometrical analysis of Kerr-lens mode-locking for high-peak-power ultrafast oscillators
Authors:
Peiyu Xia,
Makoto Kuwata-Gonokami,
Kosuke Yoshioka
Abstract:
Ultrashort pulses from Kerr-lens mode-locked oscillators have inspired a variety of applications. The design and alignment of these laser resonators have thus far been theoretically supported by the conventional analysis of beam propagation. However, the well-established theoretical framework is sometimes beyond the scope of high-peak-power oscillators. In this paper, we analyze the geometry of ri…
▽ More
Ultrashort pulses from Kerr-lens mode-locked oscillators have inspired a variety of applications. The design and alignment of these laser resonators have thus far been theoretically supported by the conventional analysis of beam propagation. However, the well-established theoretical framework is sometimes beyond the scope of high-peak-power oscillators. In this paper, we analyze the geometry of ring resonators by extending the ABCD-matrix method to a high-peak-power regime. The guidelines to achieving stable Kerr-lens mode-locking is provided for high-peak-power pulses.
△ Less
Submitted 21 March, 2020; v1 submitted 5 October, 2019;
originally announced October 2019.
-
Direct Phase Locking of a Ti:Sapphire Optical Frequency Comb to a Remote Optical Frequency Standard
Authors:
Eunmi Chae,
Kota Nakashima,
Takuya Ikeda,
Kei Sugiyama,
Kosuke Yoshioka
Abstract:
We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the Ti:Sapphire optical frequency comb eliminates the need for a local reference high-finesse cavity. The relative fractional frequency instability of the optical…
▽ More
We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the Ti:Sapphire optical frequency comb eliminates the need for a local reference high-finesse cavity. The relative fractional frequency instability of the optical frequency comb with respect to the remote optical reference was $6.7(1) \times 10^{-18}$ at 1 s and $1.05(3) \times 10^{-19}$ at 1,000 s including a 2.9 km-long fiber network. This ensured the optical frequency comb had the same precision as the optical standard. Our result paves the way for ultrahigh-precision spectroscopy and conversion of the highly precise optical frequency to radio frequencies in a simpler setup.
△ Less
Submitted 2 April, 2019; v1 submitted 19 July, 2018;
originally announced July 2018.
-
The OVAL experiment: A new experiment to measure vacuum magnetic birefringence using high repetition pulsed magnets
Authors:
Xing Fan,
Shusei Kamioka,
Toshiaki Inada,
Takayuki Yamazaki,
Toshio Namba,
Shoji Asai,
Junko Omachi,
Kosuke Yoshioka,
Makoto Kuwata-Gonokami,
Akira Matsuo,
Koushi Kawaguchi,
Koichi Kindo,
Hiroyuki Nojiri
Abstract:
A new experiment to measure vacuum magnetic birefringence (VMB), the OVAL experiment, is reported. We developed an original pulsed magnet that has a high repetition rate and applies the strongest magnetic field among VMB experiments. The vibration isolation design and feedback system enable the direct combination of the magnet with a Fabry-Pérot cavity. To ensure the searching potential, a calibra…
▽ More
A new experiment to measure vacuum magnetic birefringence (VMB), the OVAL experiment, is reported. We developed an original pulsed magnet that has a high repetition rate and applies the strongest magnetic field among VMB experiments. The vibration isolation design and feedback system enable the direct combination of the magnet with a Fabry-Pérot cavity. To ensure the searching potential, a calibration measurement with dilute nitrogen gas and a prototype search for vacuum magnetic birefringence are performed. Based on the results, a strategy to observe vacuum magnetic birefringence is reported.
△ Less
Submitted 19 May, 2017; v1 submitted 1 May, 2017;
originally announced May 2017.
-
Study on Cooling of Positronium for Bose-Einstein Condensation
Authors:
Kenji Shu,
Xing Fan,
Takayuki Yamazaki,
Toshio Namba,
Shoji Asai,
Kosuke Yoshioka,
Makoto Kuwata-Gonokami
Abstract:
A new method of cooling positronium down is proposed to realize Bose-Einstein condensation of positronium. We perform detail studies about three processes (1) thermalization processes between positronium and silica walls of a cavity, (2) Ps-Ps scatterings and (3) Laser cooling. The thermalization process is shown to be not sufficient for BEC. Ps-Ps collision is also shown to make a big effect on t…
▽ More
A new method of cooling positronium down is proposed to realize Bose-Einstein condensation of positronium. We perform detail studies about three processes (1) thermalization processes between positronium and silica walls of a cavity, (2) Ps-Ps scatterings and (3) Laser cooling. The thermalization process is shown to be not sufficient for BEC. Ps-Ps collision is also shown to make a big effect on the cooling performance. We combine both methods and establish an efficient cooling for BEC. We also propose a new optical laser system for the cooling.
△ Less
Submitted 16 February, 2016; v1 submitted 24 November, 2015;
originally announced November 2015.