-
Direct numerical simulation of transition under free-stream turbulence and the influence of large integral length scales
Authors:
Kristina Đurović,
Ardeshir Hanifi,
Philipp Schlatter,
Kenzo Sasaki,
Dan S. Henningson
Abstract:
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location…
▽ More
Under action of free-stream turbulence (FST), elongated streamwise streaky structures are generated inside the boundary layer, and their amplitude and wavelength are crucial for the transition onset. While turbulence intensity is strongly correlated with the transitional Reynolds number, characteristic length scales of the FST are often considered to have a slight impact on the transition location. However, a recent experiment by Fransson & Shahinfar (2020} shows significant effects of FST scales. They found that, for higher free-stream turbulence levels and larger integral length scales, an increase in the length scale postpones transition, contrary to established literature. Here, we aim at understanding these results by performing a series of high-fidelity simulations. These results provide understanding why the FST integral length scale affects the transition location differently. These integral length scales are so large that the wide streaks introduced in the boundary layer have substantially lower growth in the laminar region upstream of the transition to turbulence, than streaks induced by smaller integral length scales. The energy in the boundary layer subsequently propagate to smaller spanwise scales as a result of the non-linear interaction. When the energy has reached smaller spanwise scales larger amplitude streaks results in regions where the streak growth are larger. It takes longer for the energy from the wider streaks to propagate to the spanwise scales associated with the breakdown to turbulence, than for the those with smaller spanwise scales. Thus there is a faster transition for FST with lower integral length scales in this case.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Investigations of optical aberration on quantum diamond microscopy toward high spatial resolution and sensitivity
Authors:
Shunsuke Nishimura,
Moeta Tsukamoto,
Kento Sasaki,
Kensuke Kobayashi
Abstract:
Quantum diamond microscopy (QDM), which employs nitrogen-vacancy (NV) center ensembles, is a promising approach to quantitatively imaging magnetic fields with both high resolution that approaches the diffraction limit and a wide field of view. The commonly adopted setups of QDM capture the photoluminescence through transparent diamonds, which inevitably entail aberrations -- optical errors that de…
▽ More
Quantum diamond microscopy (QDM), which employs nitrogen-vacancy (NV) center ensembles, is a promising approach to quantitatively imaging magnetic fields with both high resolution that approaches the diffraction limit and a wide field of view. The commonly adopted setups of QDM capture the photoluminescence through transparent diamonds, which inevitably entail aberrations -- optical errors that degrade the optical resolution and contrast of the obtainable image. In this study, we delve into the impact of optical aberrations, focusing on their dependence on diamond thickness. We first introduce a rigorous model [Richards et al., Braat et al.] of diffraction that incorporates aberrations, producing the NV center optical image. We confirm that this model accurately reproduces the confocal images of single NV centers obtained at various depths in diamonds. Extending this model to a wide-field microscope, we find that the model also accurately reproduces the USAF 1951 resolution test chart obtained through diamonds of various thicknesses. Based on these investigations, we quantitatively assess the consequent resolution constraints and propose thinning the diamond as a viable solution. We present a robust method to quantitatively ascertain resolution in optical systems influenced by aberrations caused by ray transmission through diamonds. For instance, for a typical microscope with an objective lens of NA = 0.7, the diffraction limit is achievable through diamonds that are 30 μm thick, and a resolution of 1 μm is obtained through diamonds that are 100 μm thick. Those results opens up avenues for enhanced performance in QDM.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Chirality enhancement using topology-designed 3D nanophotonic antennas
Authors:
Atsushi Taguchi,
Yamato Fukui,
Keiji Sasaki
Abstract:
We explore chiroptical phenomena in 3D chiral nano-gap antennas using topology optimization. The characteristic helical geometries of the topology-designed antennas exhibit giant chiral dissymmetry (g=-1.70) considering the gap intensity, circular-to-linear polarization conversion, and circularly polarized light emission from a linear dipole coupled with the antenna. We observed that the spin angu…
▽ More
We explore chiroptical phenomena in 3D chiral nano-gap antennas using topology optimization. The characteristic helical geometries of the topology-designed antennas exhibit giant chiral dissymmetry (g=-1.70) considering the gap intensity, circular-to-linear polarization conversion, and circularly polarized light emission from a linear dipole coupled with the antenna. We observed that the spin angular momentum of light, flowing into the nanogap with opposite signs, locally amplifies optical chirality. These findings carry profound implications for the nanoscale control of complex light-matter interactions with structured light.
△ Less
Submitted 18 February, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
Improved convergence of the spectral proper orthogonal decomposition through time shifting
Authors:
Diego C. P. Blanco,
Eduardo Martini,
Kenzo Sasaki,
André V. G. Cavalieri
Abstract:
Spectral proper orthogonal decomposition (SPOD) is an increasingly popular modal analysis method in the field of fluid dynamics due to its specific properties: a linear system forced with white noise should have SPOD modes identical to response modes from resolvent analysis. The SPOD, coupled with the Welch method for spectral estimation, may require long time-resolved data sets. In this work, a l…
▽ More
Spectral proper orthogonal decomposition (SPOD) is an increasingly popular modal analysis method in the field of fluid dynamics due to its specific properties: a linear system forced with white noise should have SPOD modes identical to response modes from resolvent analysis. The SPOD, coupled with the Welch method for spectral estimation, may require long time-resolved data sets. In this work, a linearised Ginzburg-Landau model is considered in order to study the method's convergence. SPOD modes of the white-noise forced equation are computed and compared with corresponding response resolvent modes. The quantified error is shown to be related to the time length of Welch blocks (spectral window size) normalised by a convective time. Subsequently, an algorithm based on a temporal data shift is devised to further improve SPOD convergence and is applied to the Ginzburg-Landau system. Next, its efficacy is demonstrated in a numerical database of a boundary layer subject to bypass transition. The proposed approach achieves substantial improvement in mode convergence with smaller spectral window sizes with respect to the standard method. Furthermore, SPOD modes display growing wall-normal and span-wise velocity components along the stream-wise direction, a feature which had not yet been observed and is also predicted by a global resolvent calculation. The shifting algorithm for the SPOD opens the possibility for using the method on datasets with time series of moderate duration, often produced by large simulations.
△ Less
Submitted 19 February, 2024; v1 submitted 10 December, 2023;
originally announced December 2023.
-
Demonstration of highly-sensitive wideband microwave sensing using ensemble nitrogen-vacancy centers
Authors:
Kensuke Ogawa,
Shunsuke Nishimura,
Kento Sasaki,
Kensuke Kobayasahi
Abstract:
Microwave magnetometry is essential for the advancement of microwave technologies. We demonstrate a broadband microwave sensing protocol using the AC Zeeman effect with ensemble nitrogen-vacancy (NV) centers in diamond. A widefield microscope can visualize the frequency characteristics of the microwave resonator and the spatial distribution of off-resonant microwave amplitude. Furthermore, by comb…
▽ More
Microwave magnetometry is essential for the advancement of microwave technologies. We demonstrate a broadband microwave sensing protocol using the AC Zeeman effect with ensemble nitrogen-vacancy (NV) centers in diamond. A widefield microscope can visualize the frequency characteristics of the microwave resonator and the spatial distribution of off-resonant microwave amplitude. Furthermore, by combining this method with dynamical decoupling, we achieve the microwave amplitude sensitivity of $5.2 \, \mathrm{μT} / \sqrt{\mathrm{Hz}}$, which is 7.7 times better than $40.2 \, \mathrm{μT} / \sqrt{\mathrm{Hz}}$ obtained using the protocol in previous research over a sensing volume of $2.77 \, \mathrm{μm} \times 2.77 \, \mathrm{μm} \times 30 \, \mathrm{nm}$. Our achievement is a concrete step in adapting ensemble NV centers for wideband and widefield microwave imaging.
△ Less
Submitted 26 November, 2023;
originally announced November 2023.
-
On-chip transfer of ultrashort graphene plasmon wavepackets using terahertz electronics
Authors:
Katsumasa Yoshioka,
Guillaume Bernard,
Taro Wakamura,
Masayuki Hashisaka,
Ken-ichi Sasaki,
Satoshi Sasaki,
Kenji Watanabe,
Takashi Taniguchi,
Norio Kumada
Abstract:
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulat…
▽ More
Steering transport of ultrashort polariton wavepackets is essential for achieving on-chip integrated nanocircuits with tightly confined electromagnetic fields towards ultrafast information processing. However, conventional optical techniques have struggled to integrate the necessary components for transferring polariton signals. Here, we address this challenge by electrically generating, manipulating, and reading out terahertz graphene plasmon-polariton wavepackets on-chip. By injecting an electrical pulse into graphene via an ohmic contact, we achieve coherent conversion of the pulse into a plasmon wavepacket exhibiting a pulse duration of 1.2 ps and extreme three-dimensional spatial confinement within a volume of $2.1 \times 10^{-18} m^3$. We reveal the transport properties of plasmons along graphene ribbons in different dielectric environments, providing a basis for designing graphene plasmonic circuits. Furthermore, we find that the conversion efficiency between the electrical pulses and plasmon wavepackets reaches ~30% thanks to the absence of a momentum mismatch. With unprecedented controllability, our platform represents a significant advance in on-chip handling of plasmonic signals in various van der Waals heterostructures.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
STRAW-b (STRings for Absorption length in Water-b): the second pathfinder mission for the Pacific Ocean Neutrino Experiment
Authors:
Kilian Holzapfel,
Christian Spannfellner,
Omid Aghaei,
Andrew Baron,
Jeanette Bedard,
Michael Böhmer,
Jeff Bosma,
Nathan Deis,
Christopher Fink,
Christian Fruck,
Andreas Gärtner,
Roman Gernhäuser,
Felix Henningsen,
Ryan Hotte,
Reyna Jenkyns,
Martina Karl,
Natasha Khera,
Nikhita Khera,
Ian Kulin,
Alex Lam,
Tim Lavallee,
Klaus Leismüller,
Laszlo Papp,
Benoit Pirenne,
Emily Price
, et al. (14 additional authors not shown)
Abstract:
Since 2018, the potential for a high-energy neutrino telescope, named the Pacific Ocean Neutrino Experiment (P-ONE), has been thoroughly examined by two pathfinder missions, STRAW and STRAW-b, short for short for Strings for Absorption Length in Water. The P-ONE project seeks to install a neutrino detector with a one cubic kilometer volume in the Cascadia Basin's deep marine surroundings, situated…
▽ More
Since 2018, the potential for a high-energy neutrino telescope, named the Pacific Ocean Neutrino Experiment (P-ONE), has been thoroughly examined by two pathfinder missions, STRAW and STRAW-b, short for short for Strings for Absorption Length in Water. The P-ONE project seeks to install a neutrino detector with a one cubic kilometer volume in the Cascadia Basin's deep marine surroundings, situated near the western shores of Vancouver Island, Canada. To assess the environmental conditions and feasibility of constructing a neutrino detector of that scale, the pathfinder missions, STRAW and STRAW-b, have been deployed at a depth of 2.7 km within the designated site for P-ONE and were connected to the NEPTUNE observatory, operated by Ocean Networks Canada (ONC). While STRAW focused on analyzing the optical properties of water in the Cascadia Basin, \ac{strawb} employed cameras and spectrometers to investigate the characteristics of bioluminescence in the deep-sea environment. This report introduces the STRAW-b concept, covering its scientific objectives and the instrumentation used. Furthermore, it discusses the design considerations implemented to guarantee a secure and dependable deployment process of STRAW-b. Additionally, it showcases the data collected by battery-powered loggers, which monitored the mechanical stress on the equipment throughout the deployment. The report also offers an overview of STRAW-b's operation, with a specific emphasis on the notable advancements achieved in the data acquisition (DAQ) system and its successful integration with the server infrastructure of ONC.
△ Less
Submitted 6 February, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Optical-power-dependent splitting of magnetic resonance in nitrogen-vacancy centers in diamond
Authors:
Shuji Ito,
Moeta Tsukamoto,
Kensuke Ogawa,
Tokuyuki Teraji,
Kento Sasaki,
Kensuke Kobayashi
Abstract:
Nitrogen-vacancy (NV) centers in diamonds are a powerful tool for accurate magnetic field measurements. The key is precisely estimating the field-dependent splitting width of the optically detected magnetic resonance (ODMR) spectra of the NV centers. In this study, we investigate the optical power dependence of the ODMR spectra using NV ensemble in nanodiamonds (NDs) and a single-crystal bulk diam…
▽ More
Nitrogen-vacancy (NV) centers in diamonds are a powerful tool for accurate magnetic field measurements. The key is precisely estimating the field-dependent splitting width of the optically detected magnetic resonance (ODMR) spectra of the NV centers. In this study, we investigate the optical power dependence of the ODMR spectra using NV ensemble in nanodiamonds (NDs) and a single-crystal bulk diamond. We find that the splitting width exponentially decays and is saturated as the optical power increases. Comparison between NDs and a bulk sample shows that while the decay amplitude is sample-dependent, the optical power at which the decay saturates is almost sample-independent. We propose that this unexpected phenomenon is an intrinsic property of the NV center due to non-axisymmetry deformation or impurities. Our finding indicates that diamonds with less deformation are advantageous for accurate magnetic field measurements.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Magnetic field imaging by hBN quantum sensor nanoarray
Authors:
Kento Sasaki,
Yuki Nakamura,
Hao Gu,
Moeta Tsukamoto,
Shu Nakaharai,
Takuya Iwasaki,
Kenji Watanabe,
Takashi Taniguchi,
Shinichi Ogawa,
Yukinori Morita,
Kensuke Kobayashi
Abstract:
Placing a sensor close to the target at the nano-level is a central challenge in quantum sensing. We demonstrate high-spatial-resolution magnetic field imaging with a boron vacancy (V$_\text{B}^-$) defects array in hexagonal boron nitride with a few 10 nm thickness. V$_\text{B}^-$ sensor spots with a size of (100 nm)$^2$ are arranged periodically with nanoscale precision using a helium ion microsc…
▽ More
Placing a sensor close to the target at the nano-level is a central challenge in quantum sensing. We demonstrate high-spatial-resolution magnetic field imaging with a boron vacancy (V$_\text{B}^-$) defects array in hexagonal boron nitride with a few 10 nm thickness. V$_\text{B}^-$ sensor spots with a size of (100 nm)$^2$ are arranged periodically with nanoscale precision using a helium ion microscope and attached tightly to a gold wire. The sensor array allows us to visualize the magnetic field induced by the current in the wire with a spatial resolution beyond the diffraction limit. Each sensor exhibits a practical sensitivity of $73.6~μ\text{T/Hz}^{0.5}$, suitable for quantum materials research. Our technique of arranging V$_\text{B}^-$ quantum sensors periodically and tightly on measurement targets will maximize their potential.
△ Less
Submitted 16 June, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
-
Lock-in thermography using diamond quantum sensors
Authors:
Kensuke Ogawa,
Moeta Tsukamoto,
Kento Sasaki,
Kensuke Kobayashi
Abstract:
Precise measurement of temperature distribution and thermal behavior in microscopic regions is critical in many research fields. We demonstrate lock-in thermography using nitrogen-vacancy centers in diamond nanoparticles. We successfully visualize thermal diffusion in glass coverslip and Teflon with micrometer resolution and deduce their thermal diffusivity. By spreading diamond nanoparticles over…
▽ More
Precise measurement of temperature distribution and thermal behavior in microscopic regions is critical in many research fields. We demonstrate lock-in thermography using nitrogen-vacancy centers in diamond nanoparticles. We successfully visualize thermal diffusion in glass coverslip and Teflon with micrometer resolution and deduce their thermal diffusivity. By spreading diamond nanoparticles over the sample surface, temperature variation can be measured directly without any physical contact, such as lead wires, making it possible to visualize the micrometer-scale thermal behavior of various materials.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Enhanced energy deposition and carrier generation in silicon induced by two-color intense femtosecond laser pulses
Authors:
Mizuki Tani,
Kakeru Sasaki,
Yasushi Shinohara,
Kenichi L. Ishikawa
Abstract:
We theoretically investigate the optical energy absorption of crystalline silicon subject to dual-color femtosecond laser pulses, using the time-dependent density functional theory (TDDFT). We employ the modified Becke-Johnson (mBJ) exchange-correlation potential which reproduces the experimental direct bandgap energy $E_g$. We consider situations where the one color is in the ultraviolet (UV) ran…
▽ More
We theoretically investigate the optical energy absorption of crystalline silicon subject to dual-color femtosecond laser pulses, using the time-dependent density functional theory (TDDFT). We employ the modified Becke-Johnson (mBJ) exchange-correlation potential which reproduces the experimental direct bandgap energy $E_g$. We consider situations where the one color is in the ultraviolet (UV) range above $E_g$ and the other in the infrared (IR) range below it. The energy deposition is examined as a function of mixing ratio $η$ of the two colors with the total pulse energy conserved. Energy transfer from the laser pulse to the electronic system in silicon is dramatically enhanced by simultaneous dual-color irradiation and maximized at $η\sim 0.5$. Increased is the number of generated carriers, not the absorbed energy per carrier. The effect is more efficient for lower IR photon energy, or equivalently, larger vector-potential amplitude. As the underlying mechanism is identified the interplay between intraband electron motion in the {\it valence} band (before excitation) driven by the IR component and resonant valence-to-conduction interband excitation (carrier injection) induced by the UV component. The former increases excitable electrons which pass through the $k$ points of resonant transitions. The effect of different multiphoton absorption paths or intraband motion of carriers generated in the conduction band play a minor role.
△ Less
Submitted 1 November, 2022; v1 submitted 31 May, 2022;
originally announced May 2022.
-
R&D works for Superconducting Magnet for Future Accelerator Applications in Japan
Authors:
Toru Ogitsu,
Tatsushi Nakamoto,
Ken-ichi Sasaki,
Michinaka Sugano,
Masami Iio,
Kento Suzuki,
Makoto Yoshida,
Satoshi Awaji,
Naoyuki Amemiya
Abstract:
KEK cryogenics science center is developing superconducting magnet technology for future accelerator science. Three major technological categories are focused; 1) high precision 3D magnetic field technology based on the g-2/EDM magnet developments, 2) rad-hard superconducting magnet technology based on the COMET magnet developments, and 3) high magnetic field superconducting magnet technology for…
▽ More
KEK cryogenics science center is developing superconducting magnet technology for future accelerator science. Three major technological categories are focused; 1) high precision 3D magnetic field technology based on the g-2/EDM magnet developments, 2) rad-hard superconducting magnet technology based on the COMET magnet developments, and 3) high magnetic field superconducting magnet technology for future colliders based on the LHC MQXA and HL-LHC D1 magnet developments. Extensive studies including Nb3Sn conductor and magnet developments for high field magnets and HTS for rad-hard superconducting magnets are ongoing with various collaboration programs such as the US-Japan research collaboration.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Superconducting detector magnets for high energy physics
Authors:
Matthias Mentink,
Ken-ichi Sasaki,
Benoit Cure,
Nikkie Deelen,
Alexey Dudarev,
Mitsushi Abe,
Masami Iio,
Yasuhiro Makida,
Takahiro Okamura,
Toru Ogitsu,
Naoyuki Sumi,
Akira Yamamoto,
Makoto Yoshida,
Hiromi Iinuma
Abstract:
Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transpare…
▽ More
Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transparent vacuum vessel, quench protection scheme using pure aluminum strips and so on. The detector solenoids design study is in progress for future big projects in Japan and Europe, that is, ILC, FCC and CLIC, based on the technologies established over many years. The combination of good mechanical properties and keeping a high RRR is a key point for the development of Al-stabilized conductor. The present concern for the detector solenoid development is to have been gradually losing the key technologies and experiences, because large-scale detector magnets with Al-stabilized conductor has not been fabricated after the success of CMS and ATLAS-CS in LHC. Complementary efforts are needed to resume an equivalent level of expertise, to extend the effort on research and to develop these technologies and apply them to future detector magnet projects. Especially, further effort is necessary for the industrial technology of Al-stabilized superconductor production. The worldwide collaboration with relevant institutes and industries will be critically important to re-realize and validate the required performances. Some detector solenoids for mid-scale experiment wound with conventional copper-stabilized Nb-Ti conductor require precise control of magnetic field distribution. The development efforts are on-going in terms of the magnetic field design technology with high precision simulation, coil fabrication technology and control method of magnetic field distribution.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Causality in the shock wave/turbulent boundary layer interaction
Authors:
Kenzo Sasaki,
Diogo C. Barros,
André V. G. Cavalieri,
Lionel Larchevêque
Abstract:
The mechanisms governing the low-frequency unsteadiness in the shock wave/turbulent boundary layer interaction at Mach 2 are considered. The investigation is conducted based on the numerical database issued from large-eddy simulations covering approximately 300 cycles of the low-frequency shock fluctuations. The evaluation of the spectrum in the interaction zone indicates that the broadband low-fr…
▽ More
The mechanisms governing the low-frequency unsteadiness in the shock wave/turbulent boundary layer interaction at Mach 2 are considered. The investigation is conducted based on the numerical database issued from large-eddy simulations covering approximately 300 cycles of the low-frequency shock fluctuations. The evaluation of the spectrum in the interaction zone indicates that the broadband low-frequency unsteadiness is predominantly two-dimensional, and can be isolated via spanwise averaging. Empirically derived transfer functions are computed using the averaged flow field, and indicate the occurrence of a feedback mechanism between downstream flow regions and shock fluctuations. The transfer functions are also used as an estimation tool to predict the shock motion accurately; for the largest streamwise separation between input and output signals, correlations above 0.6 are observed between predicted and LES data. Computation of spectral proper orthogonal decomposition (SPOD) modes confirms the existence of upstream traveling waves in the leading spectral mode. Finally, the spectral modes obtained using selected flow regions downstream of the shock enable the reconstruction of a significant portion of the energy in the interaction zone. The current results shed further light on the physical mechanisms driving the shock motion, pointing towards a causal behavior between downstream areas and the characteristic unsteady fluctuations at the approximate shock position.
△ Less
Submitted 6 December, 2020;
originally announced December 2020.
-
Human Exposure to Radiofrequency Energy above 6 GHz: Review of Computational Dosimetry Studies
Authors:
Akimasa Hirata,
Sachiko Kodera,
Kensuke Sasaki,
Jose Gomez-Tames,
Ilkka Laakso,
Andrew Wood,
Soichi Watanabe,
Kenneth R. Foster
Abstract:
International guidelines/standards for human protection from electromagnetic fields have been revised recently, especially for frequencies above 6 GHz where new wireless communication systems have been deployed. Above this frequency a new physical quantity "absorbed/epithelia power density" has been adopted as a dose metric. Then, the permissible level of external field strength/power density is d…
▽ More
International guidelines/standards for human protection from electromagnetic fields have been revised recently, especially for frequencies above 6 GHz where new wireless communication systems have been deployed. Above this frequency a new physical quantity "absorbed/epithelia power density" has been adopted as a dose metric. Then, the permissible level of external field strength/power density is derived for practical assessment. In addition, a new physical quantity, fluence or absorbed energy density, is introduced for protection from brief pulses (especially for shorter than 10 sec). These limits were explicitly designed to avoid excessive increases in tissue temperature, based on electromagnetic and thermal modeling studies but supported by experimental data where available. This paper reviews the studies on the computational modeling/dosimetry which are related to the revision of the guidelines/standards. The comparisons with experimental data as well as an analytic solution are also been presented. Future research needs and additional comments on the revision will also be mentioned.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Rabi-Oscillation Spectroscopy of the Hyperfine Structure of Muonium Atoms
Authors:
S. Nishimura,
H. A. Torii,
Y. Fukao,
T. U. Ito,
M. Iwasaki,
S. Kanda,
K. Kawagoe,
D. Kawall,
N. Kawamura,
N. Kurosawa,
Y. Matsuda,
T. Mibe,
Y. Miyake,
N. Saito,
K. Sasaki,
Y. Sato,
S. Seo,
P. Strasser,
T. Suehara,
K. S. Tanaka,
T. Tanaka,
J. Tojo,
A. Toyoda,
Y. Ueno,
T. Yamanaka
, et al. (4 additional authors not shown)
Abstract:
As a new method to determine the resonance frequency, Rabi-oscillation spectroscopy has been developed. In contrast to the conventional spectroscopy which draws the resonance curve, Rabi-oscillation spectroscopy fits the time evolution of the Rabi oscillation. By selecting the optimized frequency, it is shown that the precision is twice as good as the conventional spectroscopy with a frequency swe…
▽ More
As a new method to determine the resonance frequency, Rabi-oscillation spectroscopy has been developed. In contrast to the conventional spectroscopy which draws the resonance curve, Rabi-oscillation spectroscopy fits the time evolution of the Rabi oscillation. By selecting the optimized frequency, it is shown that the precision is twice as good as the conventional spectroscopy with a frequency sweep. Furthermore, the data under different conditions can be treated in a unified manner, allowing more efficient measurements for systems consisting of a limited number of short-lived particles produced by accelerators such as muons. We have developed a fitting function that takes into account the spatial distribution of muonium and the spatial distribution of the microwave intensity to apply the new method to ground-state muonium hyperfine structure measurements at zero field. This was applied to the actual measurement data and the resonance frequencies were determined under various conditions. The result of our analysis gives $ν_{\rm HFS}=4\ 463\ 301.61 \pm 0.71\ {\rm kHz}$, which is the world's highest precision under zero field conditions.
△ Less
Submitted 12 February, 2021; v1 submitted 24 July, 2020;
originally announced July 2020.
-
J-PARC Neutrino Beamline Upgrade Technical Design Report
Authors:
K. Abe,
H. Aihara,
A. Ajmi,
C. Alt,
C. Andreopoulos,
M. Antonova,
S. Aoki,
Y. Asada,
Y. Ashida,
A. Atherton,
E. Atkin,
S. Ban,
F. C. T. Barbato,
M. Barbi,
G. J. Barker,
G. Barr,
M. Batkiewicz,
A. Beloshapkin,
V. Berardi,
L. Berns,
S. Bhadra,
J. Bian,
S. Bienstock,
A. Blondel,
S. Bolognesi
, et al. (360 additional authors not shown)
Abstract:
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut…
▽ More
In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described.
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
Selective excitation of multipolar spoof plasmons using orbital angular momentum of light
Authors:
Takashi Arikawa,
Tomoki Hiraoka,
Shohei Morimoto,
Francois Blanchard,
Shuntaro Tani,
Tomoko Tanaka,
Kyosuke Sakai,
Hiroki Kitajima,
Keiji Sasaki,
Koichiro Tanaka
Abstract:
The nature of light-matter interaction is governed by the spatial-temporal structures of a light field and material wavefunctions. The emergence of the light beam with transverse phase vortex, or equivalently orbital angular momentum (OAM) has been providing intriguing possibilities to induce unconventional optical transitions beyond the framework of the electric dipole interaction. The uniqueness…
▽ More
The nature of light-matter interaction is governed by the spatial-temporal structures of a light field and material wavefunctions. The emergence of the light beam with transverse phase vortex, or equivalently orbital angular momentum (OAM) has been providing intriguing possibilities to induce unconventional optical transitions beyond the framework of the electric dipole interaction. The uniqueness stems from the OAM transfer from light to material, as demonstrated using the bound electron of a single trapped ion. However, many aspects of the vortex light-matter interaction are still unexplored especially in solids with extended electronic states. Here, we unambiguously visualized dipole-forbidden multipolar excitations in a solid-state electron system; spoof localized surface plasmon, selectively induced by the terahertz vortex beam. The results obey the selection rules governed by the conservation of the total angular momentum, which is numerically confirmed by the electromagnetic field analysis. Our results show light's OAM can be efficiently transferred to an elementary excitation in solids.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
A realizable data-driven approach to delay bypass transition with control theory
Authors:
Pierluigi Morra,
Kenzo Sasaki,
Ardeshir Hanifi,
André V. G. Cavalieri,
Dan S. Henningson
Abstract:
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured…
▽ More
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence via active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer via a high level of free-stream turbulence (FST). The occurring disturbances are measured via localized wall sensors and damped via near-wall actuators resembling plasma actuators. The time-varying amplitude of the signal of each actuator is computed by processing signals from the sensors. This processing is the result of two control laws: the Linear Quadratic Gaussian regulator (LQG) and the Inverse Feed-Forward Control technique (IFFC). The use of the first, LQG, requires a state-space representation of the system dynamics, so the flow is described via an operator that captures only the most relevant information of the dynamics and results in a reduced order model (ROM). The ROM is computed via the eigensystem realization algorithm, based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering FST because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, in a data-driven approach that would be realizable in experiments. Finally, the effectiveness of the technique in delaying bypass transition is shown. The work (i) presents a systematic way to deal with high dimensional disturbances to build ROMs for a control technique, and (ii) shows that even when considering constraints such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in literature.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the role of actuation for the control of streaky structures in boundary layers
Authors:
Kenzo Sasaki,
Pierluigi Morra,
André V G. Cavalieri,
Ardeshir Hanifi,
Dan S. Henningson
Abstract:
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial sup…
▽ More
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence in a zero-pressure gradient, transitional boundary layer, by means of localized sensors and actuators. A linear quadratic gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial supports, corresponding to a baseline shape with only vertical forcing, and to two other shapes obtained by different optimization procedures. A computationally efficient method is derived to obtain an actuator which aims to induce the exact structures which are inside the boundary layer, given in terms of their first spectral proper orthogonal decomposition mode, and an actuator that maximizes the energy of induced downstream structures. Two free-stream turbulence levels were evaluated, corresponding to 3.0% and 3.5%, and closed-loop control is applied in large-eddy simulations of transitional boundary layers. All three actuators lead to significant delays in the transition to turbulence and were shown to be robust to mild variations in the free-stream turbulence levels. Differences are understood in terms of the SPOD of actuation and FST-induced fields along with the causality of the control scheme. The actuator optimized to generate the leading downstream SPOD mode, representing the streaks in the open-loop flow, leads to the highest transition delay, which can be understood due to its capability of closely cancelling structures in the boundary layer. However, it is shown that even with the actuator located downstream of the input measurement it may become impossible to cancel incoming disturbances in a causal way, depending on the wall-normal position of the output and on the actuator considered, which limits sensor and actuator placement capable of good closed-loop performance.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment
Authors:
M. Abe,
S. Bae,
G. Beer,
G. Bunce,
H. Choi,
S. Choi,
M. Chung,
W. da Silva,
S. Eidelman,
M. Finger,
Y. Fukao,
T. Fukuyama,
S. Haciomeroglu,
K. Hasegawa,
K. Hayasaka,
N. Hayashizaki,
H. Hisamatsu,
T. Iijima,
H. Iinuma,
K. Inami,
H. Ikeda,
M. Ikeno,
K. Ishida,
T. Itahashi,
M. Iwasaki
, et al. (71 additional authors not shown)
Abstract:
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon…
▽ More
This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$.
△ Less
Submitted 10 March, 2019; v1 submitted 10 January, 2019;
originally announced January 2019.
-
COMET Phase-I Technical Design Report
Authors:
The COMET Collaboration,
R. Abramishvili,
G. Adamov,
R. R. Akhmetshin,
A. Allin,
J. C. Angélique,
V. Anishchik,
M. Aoki,
D. Aznabayev,
I. Bagaturia,
G. Ban,
Y. Ban,
D. Bauer,
D. Baygarashev,
A. E. Bondar,
C. Cârloganu,
B. Carniol,
T. T. Chau,
J. K. Chen,
S. J. Chen,
Y. E. Cheung,
W. da Silva,
P. D. Dauncey,
C. Densham,
G. Devidze
, et al. (170 additional authors not shown)
Abstract:
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is…
▽ More
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is $3.1\times10^{-15}$, or 90 % upper limit of branching ratio of $7\times 10^{-15}$, which is a factor of 100 improvement over the existing limit. The expected number of background events is 0.032. To achieve the target sensitivity and background level, the 3.2 kW 8 GeV proton beam from J-PARC will be used. Two types of detectors, CyDet and StrECAL, will be used for detecting the \mue conversion events, and for measuring the beam-related background events in view of the Phase-II experiment, respectively. Results from simulation on signal and background estimations are also described.
△ Less
Submitted 19 May, 2020; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Pt, Ni and Ti Schottky barrier contacts to \{beta}-(Al0.19Ga0.81)2O3 grown by Molecular Beam Epitaxy on Sn doped \{beta}-Ga2O3 substrate
Authors:
Abhishek Vaidya,
K. Sasaki,
A. Kuramata,
T. Masui,
Uttam Singisetti
Abstract:
A comprehensive current-voltage (I-V) characterization is performed for three different Schottky contacts; Pt, Ni and Ti, to unintentionally doped (UID) \{beta}-(Al0.19Ga0.81)2O3 grown by molecular beam epitaxy (MBE) on \{beta}-Ga2O3 for temperatures ranging between 25C -300C. Reciprocal space mapping shows the (Al0.19Ga0.81)2O3 films are strained and lattice matched to the substrate. Schottky Bar…
▽ More
A comprehensive current-voltage (I-V) characterization is performed for three different Schottky contacts; Pt, Ni and Ti, to unintentionally doped (UID) \{beta}-(Al0.19Ga0.81)2O3 grown by molecular beam epitaxy (MBE) on \{beta}-Ga2O3 for temperatures ranging between 25C -300C. Reciprocal space mapping shows the (Al0.19Ga0.81)2O3 films are strained and lattice matched to the substrate. Schottky Barrier Height (SBH), ideality factor (n), and series resistance (Rs) are extracted from the I-V characteristics for the three types of metals and temperatures. Room temperature capacitance-voltage (C-V) measurements revealed fully depleted \{beta}-(Al0.19Ga0.81)2O3 layer. Extracted room temperature SBHs after zero field correction for Pt, Ni and Ti were 2.39 eV, 2.21 eV, and 1.22 eV respectively. Variation of SBHs with metal clearly indicates the dependence on work function.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
Insertion Magnets
Authors:
G. Ambrosio,
M. Anerella,
R. Bossert,
D. Cheng,
G. Chlachidze,
D. Dietderich,
D Duarte Ramos,
P. Fabbricatore,
S. Farinon,
H. Felice,
P. Ferracin,
P. Fessia,
J. Garcia Matos,
A. Ghosh,
P. Hagen,
S. Izquierdo Bermudez,
M. Juchno,
S. Krave,
M. Marchevsky,
T. Nakamoto,
T. Ogitsu,
J. C. Perez,
H. Prin,
J. M. Rifflet,
G. L. Sabbi
, et al. (12 additional authors not shown)
Abstract:
Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector
Authors:
K. Abe,
N. Abgrall,
Y. Ajima,
H. Aihara,
J. B. Albert,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
D. Autiero,
A. Badertscher,
M. Barbi,
G. J. Barker,
G. Barr,
M. Bass,
M. Batkiewicz,
F. Bay,
S. Bentham,
V. Berardi,
B. E. Berger
, et al. (407 additional authors not shown)
Abstract:
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o…
▽ More
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
J-PARC MUSE H-line optimization for the g-2 and MuHFS experiments
Authors:
A. Toyoda,
Y. Fujiwara,
Y. Fukao,
O. Kamigaito,
N. Kawamura,
Y. Matsuda,
T. Mibe,
T. Ogitsu,
N. Saito,
K. Sasaki,
K. Shimomura,
M. Sugano,
K. Tanaka,
D. Tomono,
H. A. Torii
Abstract:
Significant deviation of the anomalous magnetic moment value (g-2) observed by the muon g-2 experiment should be confirmed by the other experiment. This value is experimentally determined by frequency difference observed by the g-2/EDM experiment and muon magnetic moment observed by the muonium hyperfine splitting experiment (MuHFS). Both two experiments are planned to be performed at H-line of th…
▽ More
Significant deviation of the anomalous magnetic moment value (g-2) observed by the muon g-2 experiment should be confirmed by the other experiment. This value is experimentally determined by frequency difference observed by the g-2/EDM experiment and muon magnetic moment observed by the muonium hyperfine splitting experiment (MuHFS). Both two experiments are planned to be performed at H-line of the J-PARC/MUSE under construction. We optimized the beamline layout for each experiment with G4beamline. For both experiments, statistics is the most important, thus beamline transmission efficiency should be maximized. Especially for the g-2, the purpose of the present effort is to compromise between small beam size and small leakage field. For the MuHFS, it is crucial to minimize leakage field at around final focus position, and to get all stopped muons within good field region of MuHFS magnet. Conceptual design of the several final focusing systems will be presented. contribution (or invited paper) to NUFACT 11, XIIIth International Workshop on Neutrino Factories, Super beams and Beta beams, 1-6 August 2011, CERN and University of Geneva
△ Less
Submitted 5 October, 2011;
originally announced October 2011.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Quantum-Gravity Phenomenology and the DSR Ether Theories
Authors:
Kenneth M. Sasaki
Abstract:
Guided primarily by versions of a theoretical framework called Doubly Special Relativity, or DSR, that are supposed to entail speeds of light that vary with energy while preserving the relativity of inertial frames, quantum-gravity phenomenologists have recently been seeking clues to quantum gravity, in hoped-for differing times of arrival, for light of differing energies, from cosmologically dist…
▽ More
Guided primarily by versions of a theoretical framework called Doubly Special Relativity, or DSR, that are supposed to entail speeds of light that vary with energy while preserving the relativity of inertial frames, quantum-gravity phenomenologists have recently been seeking clues to quantum gravity, in hoped-for differing times of arrival, for light of differing energies, from cosmologically distant sources. However, it has long been known that signals, of arbitrarily high speed in opposing directions, could be used to observe the translational state of (absolute) rest, as could signals of a fixed speed different from c. Consequently, the above versions of DSR are nonviable.
△ Less
Submitted 20 September, 2010;
originally announced September 2010.
-
Motion of the Tippe Top : Gyroscopic Balance Condition and Stability
Authors:
Takahiro Ueda,
Ken Sasaki,
Shinsuke Watanabe
Abstract:
We reexamine a very classical problem, the spinning behavior of the tippe top on a horizontal table. The analysis is made for an eccentric sphere version of the tippe top, assuming a modified Coulomb law for the sliding friction, which is a continuous function of the slip velocity $\vec v_P$ at the point of contact and vanishes at $\vec v_P=0$. We study the relevance of the gyroscopic balance co…
▽ More
We reexamine a very classical problem, the spinning behavior of the tippe top on a horizontal table. The analysis is made for an eccentric sphere version of the tippe top, assuming a modified Coulomb law for the sliding friction, which is a continuous function of the slip velocity $\vec v_P$ at the point of contact and vanishes at $\vec v_P=0$. We study the relevance of the gyroscopic balance condition (GBC), which was discovered to hold for a rapidly spinning hard-boiled egg by Moffatt and Shimomura, to the inversion phenomenon of the tippe top. We introduce a variable $ξ$ so that $ξ=0$ corresponds to the GBC and analyze the behavior of $ξ$. Contrary to the case of the spinning egg, the GBC for the tippe top is not fulfilled initially. But we find from simulation that for those tippe tops which will turn over, the GBC will soon be satisfied approximately. It is shown that the GBC and the geometry lead to the classification of tippe tops into three groups: The tippe tops of Group I never flip over however large a spin they are given. Those of Group II show a complete inversion and the tippe tops of Group III tend to turn over up to a certain inclination angle $θ_f$ such that $θ_f<π$, when they are spun sufficiently rapidly. There exist three steady states for the spinning motion of the tippe top. Giving a new criterion for stability, we examine the stability of these states in terms of the initial spin velocity $n_0$. And we obtain a critical value $n_c$ of the initial spin which is required for the tippe top of Group II to flip over up to the completely inverted position.
△ Less
Submitted 28 July, 2005;
originally announced July 2005.
-
Ion acceleration during internal magnetic reconnection events in TST-2
Authors:
Hiroyuki Hoshika,
H. Zushi,
M. Aramasu,
H. Idei,
A. Iyomasa,
A. Ejiri,
S. Ohara,
H. Kasahara,
Y. Kamada,
S. Kawasaki,
M. Sakamoto,
K. Sasaki,
K. Sato,
S. Shiraiwa,
Y. Takagi,
Y. Takase,
H. Nakashima,
K. Nakamura,
M. Hasegawa,
K. Hanada,
A. Higashijima,
T. Yamada
Abstract:
Characteristics of ion acceleration in the internal magnetic reconnection events (IRE) have been studied by means of a neutral particle energy analyzer (NPA) in Tokyo Spherical Tokamak (TST-2). The major and minor radii are 0.38 m and 0.25m, respectively. The magnetic field strength is 0.3T and the maximum plasma current is up to 140 kA. The electron and ion temperatures are 0.4-0.5 keV and 0.1…
▽ More
Characteristics of ion acceleration in the internal magnetic reconnection events (IRE) have been studied by means of a neutral particle energy analyzer (NPA) in Tokyo Spherical Tokamak (TST-2). The major and minor radii are 0.38 m and 0.25m, respectively. The magnetic field strength is 0.3T and the maximum plasma current is up to 140 kA. The electron and ion temperatures are 0.4-0.5 keV and 0.1 keV, respectively and the electron density is ~1x1019 m-3. The NPA can be scanned toroidally from q = 74° (cw) to q = 114° (ccw), where q = 90° corresponds to the perpendicular sightline. The direction of the plasma current is cw. The NPA signals are digitized at every 50 ms. The NPA is calibrated in the energy range of 0.1 keV < E < 8.4 keV. When the IRE occurs, it is observed that the plasma current increases by ~ 20% and the loop voltage drops from 0.6 V to-5 V for ~ 0.1 ms. The enhanced charge exchange flux is observed by more than one order of magnitude at ~ 1 keV for this reconnection phase. The ion temperature increases by 80 eV at IREs. The angle q dependence of increment of Ti shows that DTi (q = 74°) is higher than that for q = 114°. This observation suggests that an ion is accelerated initially in the direction of magnetic field lines. The time evolution of the ion distribution function is simulated with a Fokker-Planck code taking into account the electric field effects.
△ Less
Submitted 23 October, 2004;
originally announced October 2004.
-
Transport barrier formation by LHCD on TRIAM-1M
Authors:
K. Hanada,
A. Iyomasa,
H. Zushi,
M. Hasegawa,
K. Sasaki,
H. Hoshika,
K. Nakamura,
M. Sakamoto,
K. N. Sato,
H. Idei,
S. Kawasaki,
H. Nakashima,
A. Higashijima
Abstract:
Internal transport barrier (ITB) has been obtained in full lower hybrid current driven (LHCD) plasmas on a superconducting tokamak, TRIMA-1M (R=0.84m, a x b=0.12mx0.18m, BT<8T). The formation of ITB depends on the current density profile, j(r), varied by the power deposition of the lower hybrid (LH). The plasma with ITB can be maintained by the LH power deposited around the foot point of ITB up…
▽ More
Internal transport barrier (ITB) has been obtained in full lower hybrid current driven (LHCD) plasmas on a superconducting tokamak, TRIMA-1M (R=0.84m, a x b=0.12mx0.18m, BT<8T). The formation of ITB depends on the current density profile, j(r), varied by the power deposition of the lower hybrid (LH). The plasma with ITB can be maintained by the LH power deposited around the foot point of ITB up to 25 sec, which corresponds to more than 100 times of current diffusion time, $τ$L/R. ITB is terminated by the reduction of current drive efficiency caused by metal impurities accumulation. In some condition, self-organized slow sawtooth oscillations (SSSO) of plasma current, density, temperature, and so on with the period comparable to the current diffusion time have been also observed during ITB discharge. The oscillation has the capability of particle exhaust, as the result, it may play an role in the avoidance of the impurity accumulation and the dilution in the future steady state fusion plasma with ITB, as the edge-localized mode in H-mode.
△ Less
Submitted 20 October, 2004;
originally announced October 2004.
-
Spinning eggs--which end will rise?
Authors:
Ken Sasaki
Abstract:
We examine the spinning behavior of egg-shaped axisymmetric bodies whose cross sections are described by several oval curves similar to real eggs with thin and fat ends. We use the gyroscopic balance condition of Moffatt and Shimomura and analyze the slip velocity of the bodies at the point of contact as a function of $θ$, the angle between the axis of symmetry and the vertical axis, and find th…
▽ More
We examine the spinning behavior of egg-shaped axisymmetric bodies whose cross sections are described by several oval curves similar to real eggs with thin and fat ends. We use the gyroscopic balance condition of Moffatt and Shimomura and analyze the slip velocity of the bodies at the point of contact as a function of $θ$, the angle between the axis of symmetry and the vertical axis, and find the existence of the critical angle $θ_c$. When the bodies are spun with an initial angle $θ_{\rm initial}>θ_c$, $θ$ will increase to $π$, implying that the body will spin at the thin end. Alternatively, if $θ_{\rm initial}<θ_c$, then $θ$ will decrease. For some oval curves, $θ$ will reduce to 0 and the corresponding bodies will spin at the fat end. For other oval curves, a fixed point at $θ_f$ is predicted, where $0 <θ_f< θ_c$. Then the bodies will spin not at the fat end, but at a new stable point with $θ_f$. The empirical fact that eggs more often spin at the fat than at the thin end is explained.
△ Less
Submitted 31 October, 2003;
originally announced October 2003.
-
Realization of a resonant non-linear phase flip in cavity quantum electrodynamics
Authors:
Holger F. Hofmann,
Kunihiro Kojima,
Shigeki Takeuchi,
Keiji Sasaki
Abstract:
Optical nonlinearities sensitive to individual photons may be extremely useful as elements in quantum logic circuits for photonic qubits. A much cited example is the work of Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)], in which a phase shift of about 10 degrees was reported. To improve this result, we propose a single sided cavity geometry with minimal cavity losses. It should then be po…
▽ More
Optical nonlinearities sensitive to individual photons may be extremely useful as elements in quantum logic circuits for photonic qubits. A much cited example is the work of Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)], in which a phase shift of about 10 degrees was reported. To improve this result, we propose a single sided cavity geometry with minimal cavity losses. It should then be possible to achieve a nonlinear phase shift of 180 degrees.
△ Less
Submitted 27 September, 2002;
originally announced September 2002.
-
Optimized phase switching using a single atom nonlinearity
Authors:
Holger F. Hofmann,
Kunihiro Kojima,
Shigeki Takeuchi,
Keiji Sasaki
Abstract:
We show that a nonlinear phase shift of pi can be obtained by using a single two level atom in a one sided cavity with negligible losses. This result implies that the use of a one sided cavity can significantly improve the pi/18 phase shift previously observed by Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)].
We show that a nonlinear phase shift of pi can be obtained by using a single two level atom in a one sided cavity with negligible losses. This result implies that the use of a one sided cavity can significantly improve the pi/18 phase shift previously observed by Turchette et al. [Phys. Rev. Lett. 75, 4710 (1995)].
△ Less
Submitted 17 March, 2003; v1 submitted 6 August, 2002;
originally announced August 2002.