-
Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation
Authors:
Camilo Florian,
Yasser Fuentes-Edfuf,
Evangelos Skoulas,
Emmanuel Stratakis,
Santiago Sanchez-Cortes,
Javier Solis,
Jan Siegel
Abstract:
The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there a…
▽ More
The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and μ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Laser engineering of biomimetic surfaces
Authors:
E. Stratakis,
J. Bonse,
J. Heitz,
J. Siegel,
G. D. Tsibidis,
E. Skoulas,
A. Papadopoulos,
A. Mimidis,
A. -C. Joel,
P. Comanns,
J. Krüger,
C. Florian,
Y. Fuentes-Edfuf,
J. Solis,
W. Baumgartner
Abstract:
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineerin…
▽ More
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineering, including phenomena of adhesion, friction, wear, lubrication, wetting phenomena, self-cleaning, antifouling, antibacterial phenomena, thermoregulation and optics. Lasers are increasingly proving to be promising tools for the precise and controlled structuring of materials at micro- and nano-scales. When ultrashort-pulsed lasers are used, the optimal interplay between laser and material parameters enables structuring down to the nanometer scale. Besides this, a unique aspect of laser processing technology is the possibility for material modifications at multiple (hierarchical) length scales, leading to the complex biomimetic micro- and nano-scale patterns, while adding a new dimension to structure optimization. This article reviews the current state of the art of laser processing methodologies, which are being used for the fabrication of bioinspired artificial surfaces to realize extraordinary wetting, optical, mechanical, and biological-active properties for numerous applications. The innovative aspect of laser functionalized biomimetic surfaces for a wide variety of current and future applications is particularly demonstrated and discussed. The article concludes with illustrating the wealth of arising possibilities and the number of new laser micro/nano fabrication approaches for obtaining complex high-resolution features, which prescribe a future where control of structures and subsequent functionalities are beyond our current imagination.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Polarization dependent spike formation on black silicon via ultrafast laser structuring
Authors:
Evangelos Skoulas,
Alexandros Mimidis,
Ioanna Demeridou,
George D. Tsibidis,
Emmanuel Stratakis
Abstract:
A comparative experimental and theoretical investigation is presented that centres on the effects of structuring black silicon surfaces with linearly, circularly and azimuthally polarized laser pulses under SF6 ambient atmosphere. It is shown that the asymmetric elliptical micro-cone formations induced by linearly polarized beams result in variable light absorption due to their spatial asymmetry.…
▽ More
A comparative experimental and theoretical investigation is presented that centres on the effects of structuring black silicon surfaces with linearly, circularly and azimuthally polarized laser pulses under SF6 ambient atmosphere. It is shown that the asymmetric elliptical micro-cone formations induced by linearly polarized beams result in variable light absorption due to their spatial asymmetry. By contrast, the use of azimuthally polarized beams leads to an omni-directionality of the elliptical cone orientation which is dependent on the local electric field during laser scanning. The locally variant electric field state that is azimuthally polarized leads to a selective conical orientation for the induced structures. The omni-directional conical distribution induced by azimuthal polarization produces similar, angle-independent absorption in the visible spectrum with the symmetrical conical structures that could only be realized with circularly polarized beams.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Biomimetic Omnidirectional Anti-reflective Glass via Direct Ultrafast Laser Nanostructuring
Authors:
Antonis Papadopoulos,
Evangelos Skoulas,
Alexandros Mimidis,
George Perrakis,
George Kenanakis,
George D. Tsibidis,
Emmanuel Stratakis
Abstract:
We report on a single-step, biomimetic approach for the realization of omnidirectional transparent antireflective glass. In particular, it is shown that circularly polarized ultrashort laser pulses produce self-organized nanopillar structures on fused silica (SiO2). The laser induced nanostructures are selectively textured on the glass surface in order to mimic the spatial randomness, pillar-like…
▽ More
We report on a single-step, biomimetic approach for the realization of omnidirectional transparent antireflective glass. In particular, it is shown that circularly polarized ultrashort laser pulses produce self-organized nanopillar structures on fused silica (SiO2). The laser induced nanostructures are selectively textured on the glass surface in order to mimic the spatial randomness, pillar-like morphology, as well as the remarkable anti-reflection properties found on the wings of the glasswing butterfly, Greta oto[1] and various Cicada species[2]. The artificial structures exhibit impressive anti-reflective properties, both in the visible and infrared frequency range. Accordingly, the laser-processed glass surfaces show reflectivity smaller than 1% for various angles of incidence in the visible spectrum for S-P linearly polarized configurations. While, in the near infrared spectrum, the laser-textured glass shows higher transmittance compared to the pristine. It is envisaged that our current results will revolutionize the technology of anti-reflective transparent surfaces and impact numerous applications from glass displays to optoelectronic devices.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Predictive modeling approaches in laser-based material processing
Authors:
Maria Christina Velli,
George D. Tsibidis,
Alexandros Mimidis,
Evangelos Skoulas,
Yannis Pantazis,
Emmanuel Stratakis
Abstract:
Predictive modelling represents an emerging field that combines existing and novel methodologies aimed to rapidly understand physical mechanisms and concurrently develop new materials, processes and structures. In the current study, previously-unexplored predictive modelling in a key-enabled technology, the laser-based manufacturing, aims to automate and forecast the effect of laser processing on…
▽ More
Predictive modelling represents an emerging field that combines existing and novel methodologies aimed to rapidly understand physical mechanisms and concurrently develop new materials, processes and structures. In the current study, previously-unexplored predictive modelling in a key-enabled technology, the laser-based manufacturing, aims to automate and forecast the effect of laser processing on material structures. The focus is centred on the performance of representative statistical and machine learning algorithms in predicting the outcome of laser processing on a range of materials. Results on experimental data showed that predictive models were able to satisfactorily learn the mapping between the laser input variables and the observed material structure. These results are further integrated with simulation data aiming to elucidate the multiscale physical processes upon laser-material interaction. As a consequence, we augmented the adjusted simulated data to the experimental and substantially improved the predictive performance, due to the availability of increased number of sampling points. In parallel, a metric to identify and quantify the regions with high predictive uncertainty, is presented, revealing that high uncertainty occurs around the transition boundaries. Our results can set the basis for a systematic methodology towards reducing material design, testing and production cost via the replacement of expensive trial-and-error based manufacturing procedure with a precise pre-fabrication predictive tool.
△ Less
Submitted 13 June, 2020;
originally announced June 2020.
-
Formation of periodic surface structures on dielectrics after irradiation with laser beams of spatially variant polarisation: a comparative study
Authors:
Antonis Papadopoulos,
Evangelos Skoulas,
George D. Tsibidis,
Emmanuel Stratakis
Abstract:
A comparative study is performed to explore the periodic structure formation upon intense femtosecond pulsed irradiation of dielectrics with radially and azimuthally polarised beams. Laser conditions have been selected appropriately to produce excited carriers with densities below the optical breakdown threshold in order to highlight the role of phase transitions in surface modification mechanisms…
▽ More
A comparative study is performed to explore the periodic structure formation upon intense femtosecond pulsed irradiation of dielectrics with radially and azimuthally polarised beams. Laser conditions have been selected appropriately to produce excited carriers with densities below the optical breakdown threshold in order to highlight the role of phase transitions in surface modification mechanisms. The frequency of the laser induced structures is calculated based on a theoretical model that comprises estimation of electron density excitation, heat transfer, relaxation processes, and hydrodynamics-related mass transport. The influence of the laser wavelength in the periodicity of the structures is also unveiled. The decreased energy absorption for azimuthally polarised beams yields periodic structures with smaller frequencies which are more pronounced as the number of laser pulses applied to the irradiation spot increases. Similar results are obtained for laser pulses of larger photon energy and higher fluences. All induced periodic structures are oriented parallel to the laser beam polarisation.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
