-
Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation
Authors:
Camilo Florian,
Yasser Fuentes-Edfuf,
Evangelos Skoulas,
Emmanuel Stratakis,
Santiago Sanchez-Cortes,
Javier Solis,
Jan Siegel
Abstract:
The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there a…
▽ More
The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and μ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Single-step fabrication of high performance extraordinary transmission plasmonic metasurfaces employing ultrafast lasers
Authors:
Carlota Ruiz de Galarreta,
Noemi Casquero,
Euan Humphreys,
Jacopo Bertolotti,
Javier Solis,
C. David Wright,
Jan Siegel
Abstract:
Plasmonic metasurfaces based on the extraordinary optical transmission effect (EOT) can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in im-portant technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT m…
▽ More
Plasmonic metasurfaces based on the extraordinary optical transmission effect (EOT) can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in im-portant technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT metasurfaces are nowadays fabricated with nano- and micro-lithographic techniques, requiring many processing steps and carried out in expensive cleanroom environments. In this work, we propose and experimentally demonstrate a novel, single-step process for the rapid fabrication of high performance mid- and long-wave infrared EOT metasurfaces employing ultrafast direct laser writing (DLW). Micro-hole arrays composing extraordinary transmission metasurfaces were fabricated over areas of 4 mm2 in timescales of units of minutes, employing single pulse ablation of 40 nm thick Au films on dielectric substrates mounted on a high-precision motorized stage. We show how by carefully characterizing the influence of only three key experimental pa-rameters on the processed micro-morphologies (namely laser pulse energy, scan velocity and beam shaping slit), we can have on-demand control of the optical characteristics of the extraordinary transmission effect in terms of transmission wavelength, quality factor and polarization sensitivity of the resonances. To illustrate this concept, a set of EOT metasurfaces having different performances and operating in different spectral regimes has been successfully designed, fabricated and tested. Comparison between transmittance measurements and numerical simulations have revealed that all the fabricated devices behave as expected, thus demonstrating the high performance, flexibility and reliability of the proposed fabrication method.
△ Less
Submitted 25 January, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Multiscale ultrafast laser texturing of marble for reduced surface wetting
Authors:
Rocio Ariza,
Miguel Alvarez-Alegria,
Gloria Costas,
Leo Tribaldo,
Agustin R. Gonzalez Elipe,
Jan Siegel,
Javier Solis
Abstract:
The modification of the wetting properties of marble surfaces upon multi-scale texturing induced by ultrafast laser processing (340 fs pulse duration, 1030 nm wavelength) has been investigated with the aim of evaluating its potential for surface protection. The contact angle (CA) of a water drop placed on the surface was used to assess the wettability of the processed areas. Although the surfaces…
▽ More
The modification of the wetting properties of marble surfaces upon multi-scale texturing induced by ultrafast laser processing (340 fs pulse duration, 1030 nm wavelength) has been investigated with the aim of evaluating its potential for surface protection. The contact angle (CA) of a water drop placed on the surface was used to assess the wettability of the processed areas. Although the surfaces are initially hydrophilic upon laser treatment, after a few days they develop a strong hydrophobic behavior. Marble surfaces have been irradiated with different scan line separations to elucidate the relative roles of multi-scale roughness (nano- and micro-texture) and chemical changes at the surface. The time evolution of the contact angle has been then monitored up to 11 months after treatment. A short and a long-term evolution, associated to the combined effect of multi-scale roughness and the attachment of chemical species at the surface over the time, have been observed. XPS and ATR measurements are consistent with the progressive hydroxylation of the laser treated surfaces although the additional contribution of hydrocarbon adsorbates to the wettability evolution cannot be ruled-out. The robustness of the results has been tested by CA measurements after cleaning in different conditions with very positive results.
△ Less
Submitted 28 September, 2021; v1 submitted 19 July, 2021;
originally announced August 2021.
-
Laser engineering of biomimetic surfaces
Authors:
E. Stratakis,
J. Bonse,
J. Heitz,
J. Siegel,
G. D. Tsibidis,
E. Skoulas,
A. Papadopoulos,
A. Mimidis,
A. -C. Joel,
P. Comanns,
J. Krüger,
C. Florian,
Y. Fuentes-Edfuf,
J. Solis,
W. Baumgartner
Abstract:
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineerin…
▽ More
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineering, including phenomena of adhesion, friction, wear, lubrication, wetting phenomena, self-cleaning, antifouling, antibacterial phenomena, thermoregulation and optics. Lasers are increasingly proving to be promising tools for the precise and controlled structuring of materials at micro- and nano-scales. When ultrashort-pulsed lasers are used, the optimal interplay between laser and material parameters enables structuring down to the nanometer scale. Besides this, a unique aspect of laser processing technology is the possibility for material modifications at multiple (hierarchical) length scales, leading to the complex biomimetic micro- and nano-scale patterns, while adding a new dimension to structure optimization. This article reviews the current state of the art of laser processing methodologies, which are being used for the fabrication of bioinspired artificial surfaces to realize extraordinary wetting, optical, mechanical, and biological-active properties for numerous applications. The innovative aspect of laser functionalized biomimetic surfaces for a wide variety of current and future applications is particularly demonstrated and discussed. The article concludes with illustrating the wealth of arising possibilities and the number of new laser micro/nano fabrication approaches for obtaining complex high-resolution features, which prescribe a future where control of structures and subsequent functionalities are beyond our current imagination.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Deep UV laser induced periodic surface structures on silicon formed by self-organization of nanoparticles
Authors:
Raul Zazo,
Javier Solis,
José A. Sanchez-Gil,
Rocio Ariza,
Rosalia Serna,
Jan Siegel
Abstract:
We have investigated the formation of laser-induced periodic surface structures (LIPSS or ripples) on silicon upon excitation with p-polarized excimer laser pulses in the deep ultraviolet region (wavelength = 193 nm, pulse duration = 20 ns). Well-pronounced ripples with a period close to the laser wavelength were observed for pulse numbers N = 100 or higher, and the ripple period increased with th…
▽ More
We have investigated the formation of laser-induced periodic surface structures (LIPSS or ripples) on silicon upon excitation with p-polarized excimer laser pulses in the deep ultraviolet region (wavelength = 193 nm, pulse duration = 20 ns). Well-pronounced ripples with a period close to the laser wavelength were observed for pulse numbers N = 100 or higher, and the ripple period increased with the angle of incidence. While these results seem to be qualitatively consistent with the standard Sipe-theory, we observed a fundamentally different ripple formation mechanism and ripple morphology. At low pulse numbers, isolated nanoparticles with a size of a few tens of nanometers are observed at the silicon surface, which then start to agglomerate in 2D and self-organize to form ripples with a very shallow modulation depth as the pulse number increases. Employing a recently developed plasmonic model based on the propagation of a surface plasmon polariton on a rough surface, we demonstrate excellent quantitative agreement of the evolution of the ripple period with incidence angle. Finally, we show that surface regions exposed to lower laser fluence feature micro- and nanopores, which give rise to pronounced photoluminescence (PL) emission in the visible spectral region, as opposed to the nanoparticle-based ripples not showing PL.
△ Less
Submitted 27 October, 2020;
originally announced November 2020.
-
Tuning the period of femtosecond laser induced surface structures in steel: from angled incidence to quill writing
Authors:
Yasser Fuentes-Edfuf,
José A. Sánchez-Gil,
Marina Garcia Pardo,
Rosalía Serna,
George D. Tsibidis,
Vincenzo Giannini,
Javier Solis,
Jan Siegel
Abstract:
Exposure of metal surfaces to multiple ultrashort laser pulses under certain conditions leads to the formation of well-defined periodic surface structures. We show how the period of such structures in steel can be tuned over a wide range by controlling the complex interaction mechanisms triggered in the material. Amongst the different irradiation parameters that influence the properties of the ind…
▽ More
Exposure of metal surfaces to multiple ultrashort laser pulses under certain conditions leads to the formation of well-defined periodic surface structures. We show how the period of such structures in steel can be tuned over a wide range by controlling the complex interaction mechanisms triggered in the material. Amongst the different irradiation parameters that influence the properties of the induced structures, the angle of incidence of the laser beam occupies a prominent role. We present an experimental and theoretical investigation of this angle dependence in steel upon irradiation with laser pulses of 120 fs duration and 800 nm wavelength, while moving the sample at constant speed. Our findings can be grouped into two blocks. First, we observe the spatial coexistence of two different ripple periods at the steel surface, both featuring inverse scaling upon angle increase, which are related to forward and backward propagation of surface plasmon polaritons. To understand the underlying physical phenomena, we extend a recently developed model that takes into account quantitative properties of the surface roughness to the case of absorbing metals (large imaginary part of the dielectric function), and obtain an excellent match with the experimentally observed angle dependence. As second important finding, we observe a quill writing effect, also termed non-reciprocal writing, in form of a significant change of the ripple period upon reversing the sample movement direction. This remarkable phenomenon has been observed so far only inside dielectric materials and our work underlines its importance also in laser surface processing. We attribute the origin of symmetry breaking to the non-symmetric micro- and nanoscale roughness induced upon static multiple pulse irradiation, leading to non-symmetric modification of the wavevector of the coupled surface plasmon polariton.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Ionic Structure and Decay Length in Highly-Concentrated Confined Electrolytes
Authors:
Nasim Anousheh,
Francisco J. Solis,
Vikram Jadhao
Abstract:
We use molecular dynamics simulations of the primitive model of electrolytes to study the ionic structure in aqueous monovalent electrolyte solutions confined by charged planar interfaces over a wide range of electrolyte concentration, interfacial separation, surface charge density, and ion size. The investigations are inspired by recent experiments that have directly measured the increase in the…
▽ More
We use molecular dynamics simulations of the primitive model of electrolytes to study the ionic structure in aqueous monovalent electrolyte solutions confined by charged planar interfaces over a wide range of electrolyte concentration, interfacial separation, surface charge density, and ion size. The investigations are inspired by recent experiments that have directly measured the increase in the decay length for highly-concentrated electrolytes with increase in concentration. The behavior of ions in the nanoconfinement created by the interfaces is probed by evaluating the ionic density profiles, net charge densities, screening factors, and decay length associated with the screening of the charged interface. Results show the presence of two distinct regimes of screening behavior as the concentration is changed from 0.1 M to 2.5 M for a wide range of electrolyte systems generated by tuning the interfacial separation, surface charge density, and ionic size. For low concentrations, the screening factor exhibits a monotonic decay to 0 with a decay length that decreases sharply with increasing concentration. For high concentrations ($\gtrsim 1$ M), the screening factor has a non-monotonic behavior signaling charge inversion and formation of structured layers of ions near the interfaces. The decay length under these conditions rises with increasing concentration, exhibiting a power-law behavior. To complement the simulation results, a variational approach is developed that produces charge densities with characteristics consistent with those observed in simulations. The results demonstrate the relation between the rise in the strength of steric correlations and the changes in the screening behavior.
△ Less
Submitted 5 September, 2020;
originally announced September 2020.
-
Surface plasmon polaritons on rough metal surfaces: Understanding the formation of laser induced periodic surface structures in metals
Authors:
Y. Fuentes-Edfuf,
J. A. Sanchez-Gil,
C. Florian,
V. Giannini,
J. Solis,
J. Siegel
Abstract:
The formation of self-organized laser induced periodic surface structures (LIPSS) in metals, semiconductors and dielectrics upon pulsed laser irradiation is a well-known phenomenon, receiving increased attention due to its huge technological potential. For the case of metals, a major role in this process is played by surface plasmon polaritons (SPPs) propagating at the interface of the metal with…
▽ More
The formation of self-organized laser induced periodic surface structures (LIPSS) in metals, semiconductors and dielectrics upon pulsed laser irradiation is a well-known phenomenon, receiving increased attention due to its huge technological potential. For the case of metals, a major role in this process is played by surface plasmon polaritons (SPPs) propagating at the interface of the metal with the medium of incidence. Yet, simple and advanced models based on SPP propagation sometimes fail to explain experimental results, even of basic features as the LIPSS period. We experimentally demonstrate, for the particular case of LIPSS on Cu, that significant deviations of the structure period from the predictions of the standard model are observed, which are very pronounced for elevated angles of laser incidence. In order to explain this deviation, we introduce a model based on the propagation of a SPP on a rough surface that takes into account the influence of the specific roughness properties on the SPP wave vector. Good agreement of the modelling results with the experimental data is observed, which highlights the potential of this model for the general understanding of LIPSS in other metals.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Mid-infrared surface plasmon polariton chemical sensing on fiber-coupled ITO coated glass
Authors:
Javier Martinez,
Airan Rodenas,
Magdalena Aguilo,
Toney Fernandez,
Javier Solis,
Francesc Diaz
Abstract:
A novel fiber-coupled ITO coated glass slide sensor for performing surface plasmon polariton chemical monitoring in the 3.5 um mid-IR range is reported. Efficient mid-IR fiber coupling is achieved with 3D laser written waveguides, and the coupling of glass waveguide modes to ITO SPPs is driven by the varying phase matching conditions of different aqueous analytes across the anomalous dispersion ra…
▽ More
A novel fiber-coupled ITO coated glass slide sensor for performing surface plasmon polariton chemical monitoring in the 3.5 um mid-IR range is reported. Efficient mid-IR fiber coupling is achieved with 3D laser written waveguides, and the coupling of glass waveguide modes to ITO SPPs is driven by the varying phase matching conditions of different aqueous analytes across the anomalous dispersion range determined by their molecular fingerprints. By means of using both a mid-IR fiber supercontinuum source and a diode laser the excitation of SPPs is demonstrated. The efficient optical monitoring of mid-IR SPPs in smart glass could have a broad range of applications in biological and chemical sensing.
△ Less
Submitted 19 April, 2016;
originally announced April 2016.
-
Optical channel waveguides written by high repetition rate femtosecond laser irradiation in Li-Zn fluoroborate glass
Authors:
Sunil Thomas,
T. Toney Fernandez,
Javier Solis,
P. R. Biju,
N. V. Unnikrishnan
Abstract:
Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500 kHz, 1 MHz and 2 MHz laser repetition rates, showing a refractive index contrast in the range of 3-6 x 10-3 depending on various fluences. Dependence of experim…
▽ More
Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500 kHz, 1 MHz and 2 MHz laser repetition rates, showing a refractive index contrast in the range of 3-6 x 10-3 depending on various fluences. Dependence of experimental parameters such as average laser power, pulse repetition rate and writing speed on the properties of fabricated waveguides has been discussed. The comparison of optical and compositional characterization techniques evidences an enrichment of B and Zn in the guiding region, while F migrates to the heat diffused region of the written structure.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
Dual regimes of ion migration in high repetition rate femtosecond laser inscribed waveguides
Authors:
T. Toney Fernandez,
B. Sotillo,
J. del Hoyo,
J. A Valles,
R. Martinez Vazquez,
P. Fernandez,
J. Solis
Abstract:
Ion migration in high repetition rate femtosecond laser inscribed waveguides is currently being reported in different optical glasses. For the first time we discuss and experimentally demonstrate the presence of two regimes of ion migration found in laser written waveguides. Regime-I, corresponds to the initial waveguide formation mainly via light element migration (in our case atomic weight < 31u…
▽ More
Ion migration in high repetition rate femtosecond laser inscribed waveguides is currently being reported in different optical glasses. For the first time we discuss and experimentally demonstrate the presence of two regimes of ion migration found in laser written waveguides. Regime-I, corresponds to the initial waveguide formation mainly via light element migration (in our case atomic weight < 31u), whereas regime-II majorly corresponds to the movement of heavy elements. This behavior brings attention to a problem which has never been analyzed before and that affects laser written active waveguides in which active ions migrate changing their local spectroscopic properties. The migration of active ions may in fact detune the pre-designed optimal values of active photonic devices. This paper experimentally evidences this problem and provides solutions to avert it.
△ Less
Submitted 13 May, 2015; v1 submitted 18 December, 2014;
originally announced December 2014.
-
Controlling plasma distributions as driving forces for ion migration during fs laser writing
Authors:
Toney Teddy Fernandez,
Jan Siegel,
Jesus Hoyo,
Belen Sotillo,
Paloma Fernandez,
Javier Solis
Abstract:
The properties of structures written inside dielectrics with high repetition rate femtosecond lasers are known to depend strongly on the complex interplay of a large number of writing parameters. Recently, ion migration within the laser-excited volume has been identified as a powerful mechanism for changing the local element distribution and producing efficient optical waveguides. In this work it…
▽ More
The properties of structures written inside dielectrics with high repetition rate femtosecond lasers are known to depend strongly on the complex interplay of a large number of writing parameters. Recently, ion migration within the laser-excited volume has been identified as a powerful mechanism for changing the local element distribution and producing efficient optical waveguides. In this work it is shown that the transient plasma distribution induced during laser irradiation is a reliable monitor for predicting the final refractive index distribution of the waveguide caused by ion migration. By performing in-situ plasma emission microscopy during the writing process inside a La-phosphate glass it is found that the long axis of the plasma distribution determines the axis of ion migration, being responsible for the local refractive index increase. This observation is also valid when strong positive or negative spherical aberration is induced, greatly deforming the focal volume and inverting the index profile. Even subtle changes in the writing conditions, such as an inversion of the writing direction (quill writing effect), show up in the form of a modified plasma distribution, which manifests as a modified index distribution. Finally, it is shown that the superior control over the waveguide properties employing the slit shaping technique is caused by the more confined plasma distribution produced. The underlying reasons for this unexpected result are discussed in terms of non-linear propagation and heat accumulation.
△ Less
Submitted 14 April, 2015; v1 submitted 25 November, 2014;
originally announced November 2014.
-
Transient Newton rings in dielectrics upon fs laser ablation
Authors:
Mario Garcia-Lechuga,
Jan Siegel,
Javier Hernandez-Rueda,
Javier Solis
Abstract:
We report the appearance of transient Newton rings in dielectrics (sapphire and lead-oxide glass) during ablation with single fs laser pulses. Employing femtosecond microscopy with 800 nm excitation and 400 nm illumination, we observe a characteristic ring pattern that dynamically changes for increasing delay times between pump and probe pulse. Such transient Newton rings have been previously obse…
▽ More
We report the appearance of transient Newton rings in dielectrics (sapphire and lead-oxide glass) during ablation with single fs laser pulses. Employing femtosecond microscopy with 800 nm excitation and 400 nm illumination, we observe a characteristic ring pattern that dynamically changes for increasing delay times between pump and probe pulse. Such transient Newton rings have been previously observed in metals and semiconductors at fluences above the ablation threshold and were related to optical interference of the probe beam reflected at the front surface of the ablating layer and at the interface of the non-ablating substrate. Yet, it had been generally assumed that this phenomenon cannot be (and has not been) observed in dielectrics due to the different ablation mechanism and optical properties of dielectrics. The fact that we are able to observe them has important consequences for the comprehension of the ablation mechanisms in dielectrics and provides a new method for investigating these mechanisms in more detail.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
Generating true minima in constrained variational formulations via modified Lagrange multipliers
Authors:
Francisco J. Solis,
Vikram Jadhao,
Monica Olvera de la Cruz
Abstract:
Variational principles are important in the investigation of large classes of physical systems. They can be used both as analytical methods as well as starting points for the formulation of powerful computational techniques such as dynamical optimization methods. Systems with charged objects in dielectric media and systems with magnetically active particles are important examples. In these example…
▽ More
Variational principles are important in the investigation of large classes of physical systems. They can be used both as analytical methods as well as starting points for the formulation of powerful computational techniques such as dynamical optimization methods. Systems with charged objects in dielectric media and systems with magnetically active particles are important examples. In these examples and other important cases, the variational principles describing the system are required to obey a number of constraints. These constraints are implemented within the variational formulation by means of Lagrange multipliers. Such constrained variational formulations are in general not unique. For the application of efficient simulation methods, one must find specific formulations that satisfy a number of important conditions. An often required condition is that the functional be positive-definite, in other words, its extrema be actual minima. In this article, we present a general approach to attack the problem of finding, among equivalent variational functionals, those that generate true minima. The method is based on the modification of the Lagrange multiplier which allows us to generate large families of effective variational formulations associated with a single original constrained variational principle. We demonstrate its application to different examples and, in particular, to the important cases of Poisson and Poisson-Boltzmann equations. We show how to obtain variational formulations for these systems with extrema that are always minima.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.