article

A CNTFET-C first order all pass filter

Authors:

Muhammad I. Masud,

Nasir Shaikh-HusinAuthors Info & Claims

Analog Integrated Circuits and Signal Processing, Volume 100, Issue 2

Pages 257 - 268

https://doi.org/10.1007/s10470-018-1361-8

Published: 01 August 2019 Publication History

Abstract

A compact, low voltage, low power and high frequency voltage mode first order all-pass-filter (APF) topology is presented using carbon nanotube field effect transistor (CNTFET) based inverting voltage buffer. The proposed resistor-less APF topology uses only one capacitor and two N-type CNTFETs. Adding one CNTFET based voltage controlled resistor to the proposed first order APF results into an electronically controlled first order APF with a tuneable frequency range between 1.913 and 40.2 GHz. The proposed circuits are potential candidate for low voltage analog applications as it uses only two transistors between its supply rails. Moreover, both the proposed topologies do not have any passive component matching constraint. The realized filter circuit performance is verified with HSPICE simulations, using well known Deng's CNTFET model at 16 nm technology node with supply voltage of 0.7 V. The simulation results substantiate the theoretical predictions.

References

[1]

Pandey, N., Arora, P., Kapur, S., & Malhotra, S. (2011). First order voltage mode MO-CCCCTA based all pass filter. In Proceedings of the international conference on communications and signal processing. ICCSP 2011, Calicut, India (pp. 535---537).

[2]

Herencsar, N., Koton, J., Vrba, K., & Minaei, S. (2011). Electronically tunable MOSFET-C voltage-mode all-pass filter based on universal voltage conveyor. In Proceedings of the 3rd international conference on communication software and networks. ICCSN 2011, Xi'an, China (pp. 442---445).

[3]

Herencsar, N., Koton, J., Jerabek, J., Vrba, K., & Cicekoglu, O. (2011). Voltage-mode all-pass filters using universal voltage conveyor and MOSFET-based electronic resistors. Radioengineering,20(1), 10---18.

[4]

Herencsar, N., Koton, J., & Vrba, K. (2009). A new electronically tunable voltage-mode active-C phase shifter using UVC and OTA. IEICE Electron. Express,6(17), 1212---1218.

[5]

Minaei, S., & Yuce, E. (2010). Novel voltage-mode all-pass filter based on using DVCCs. Circuits Syst. Signal Process.,29(3), 391---402.

[6]

Horng, J.-W. (2010). DVCCs based high input impedance voltage-mode first-order allpass, highpass and lowpass filters employing grounded capacitor and resistor. Radioengineering,19(4), 653---656.

[7]

Minaei, S., & Cicekoglu, O. (2006). A resistorless realization of the first-order all-pass filter. Int. J. Electron.,93(03), 177---183.

[8]

Kumar, P., Keskin, A., & Pal, K. (2007). Wide-band resistorless all-pass sections with single element tuning. Int. J. Electron.,94(6), 597---604.

[9]

Biolkova, V., Kolka, Z., & Biolek, D. (2011). Dual-output all-pass filter employing fully-differential operational amplifier and current-controlled current conveyor. In Proceedings of the 7th international conference on electrical and electronics engineering-ELECO, 2011, Bursa, Turkey (pp. 340---344).

[10]

Metin, B., Pal, K., & Cicekoglu, O. (2011). All-pass filters using DDCC-and MOSFET-based electronic resistor. Int. J. Circuit Theory Appl.,39(8), 881---891.

Digital Library

[11]

Metin, B., & Pal, K. (2010). New all-pass filter circuit compensating for C-CDBA non-idealities. J. Circuits Syst. Comput.,19(02), 381---391.

[12]

Kumngern, M., Chanwutitum, J., & Dejhan, K. (2008). Electronically tunable voltage-mode all-pass filter using simple CMOS OTAs. In Proceedings of the 2008 international symposium on communications and information technologies. ISCIT, 2008, Lao, China (pp. 1---5).

[13]

Tanaphatsiri, C., Jaikla, W., & Siripruchyanun, M. (2008). An electronically controllable voltage-mode first-order all-pass filter using only single CCCDTA. In Proceedings of the 2008 international symposium on communications and information technologies. ISCIT, 2008, Lao, China (pp. 305---309).

[14]

Herencsar, N., Koton, J., Vrba, K., & Metin, B. (2011). Novel voltage conveyor with electronic tuning and its application to resistorless all-pass filter. In Proceedings of the 34th international Conference on Telecommunications and Signal processing. TSP, 2011, Budapest, Hungary (pp. 265---268).

[15]

Metin, B., Pal, K., & Cicekoglu, O. (2011). CMOS-controlled inverting CDBA with a new all-pass filter application. Int. J. Circuit Theory Appl.,39(4), 417---425.

Digital Library

[16]

Metin, B., Herencsar, N., & Cicekoglu, O. (2013). A low-voltage electronically tunable MOSFET-C voltage-mode first-order all-pass filter design. Radioengineering,22(4), 985---994.

[17]

Yuce, E., & Minaei, S. (2012). Derivation of low-power first-order low-pass, high-pass and all-pass filters. Analog Integr. Circuits Signal Process.,70(1), 151---156.

Digital Library

[18]

Yuce, E., & Minaei, S. (2010). A novel phase shifter using two NMOS transistors and passive elements. Analog Integr. Circuits Signal Process.,62(1), 77.

Digital Library

[19]

Maundy, B. J., & Aronhime, P. (2002). A novel CMOS first-order all-pass filter. Int. J. Electron.,89(9), 739---743.

[20]

Metin, B., & Cicekoglu, O. (2008). Tunable all-pass filter with a single inverting voltage buffer. In Proceedings of the 2008 Ph.D. research in microelectronics and electronics-PRIME, 2008, Istanbul, Turkey (pp. 261---263).

[21]

Yuce, E. (2010). A novel CMOS-based voltage-mode first-order phase shifter employing a grounded capacitor. Circuits Syst. Signal Process.,29(2), 235---245.

[22]

Toker, A., & Özo?uz, S. (2003). Tunable allpass filter for low voltage operation. Electron. Lett.,39(2), 175---176.

[23]

Herencsar, N., Minaei, S., Koton, J., Yuce, E., & Vrba, K. (2013). New resistorless and electronically tunable realization of dual-output VM all-pass filter using VDIBA. Analog Integr. Circuit Signal Process.,74(1), 141---154.

Digital Library

[24]

Yücel, F., & Yuce, E. (2016). A new electronically tunable first-order all-pass filter using only three NMOS transistors and a capacitor. Turk. J. Electr. Eng. Comput. Sci.,24(4), 3286---3292.

[25]

Minaei, S., & Yuce, E. (2012). High input impedance NMOS-based phase shifter with minimum number of passive elements. Circuits Syst. Signal Process.,31(1), 51---60.

[26]

Herencsar, N., Minaei, S., Koton, J., & Vrba, K. (2015). Voltage-mode all-pass filter design using simple CMOS transconductor: Non-ideal case study. In Proceedings of the 38th international conference on telecommunications and signal processing. TSP, 2015, Prague, Czech Republic (pp. 677---681).

[27]

Frank, D. J., Dennard, R. H., Nowak, E., Solomon, P. M., Taur, Y., & Wong, H.-S. P. (2001). Device scaling limits of Si MOSFETs and their application dependencies. Proceedings of the IEEE,89(3), 259---288.

[28]

Kuhn, K. J. (2012). Considerations for ultimate CMOS scaling. IEEE Transactions on Electron Devices,59(7), 1813---1828.

[29]

Schröter, M., Claus, M., Hermann, S., Tittman-Otto, J., Haferlach, M., Mothes, S., et al. (2016). CNTFET-based RF electronics--State-of-the-art and future prospects. In IEEE 16th topical meeting on silicon monolithic integrated circuits in RF systems. SiRF, 2016, Austin, USA (pp. 97---100).

[30]

Voinigescu, S. P., Tomkins, A., Dacquay, E., Chevalier, P., Hasch, J., Chantre, A., et al. (2013). A study of SiGe HBT signal sources in the 220---330-GHz range. IEEE Journal of Solid-State Circuits,48(9), 2011---2021.

[31]

Hayat, K., Cheema, H., & Shamim, A. (2013). Potential of carbon nanotube field effect transistors for analogue circuits. The Journal of Engineering. https://doi.org/10.1049/joe.2013.0067.

[32]

Imran, A., Hasan, M., Islam, A., & Abbasi, S. A. (2012). Optimized design of a 32-nm CNFET-based low-power ultrawideband CCII. IEEE Transactions on Nanotechnology,11(6), 1100---1109.

Digital Library

[33]

Tripathi, S., Ansari, M. S., & Joshi, A. M. (2017). Low-noise tunable band-pass filter for ISM 2.4 GHz bluetooth transceiver in?±?0.7 V 32 nm CNFET technology. In Proceedings of the 2017 international conference on data engineering and communication technology, 2017, Singapore (pp. 435---443).

[34]

Nizamuddin, M., Loan, S. A., Alamoud, A. R., & Abbassi, S. A. (2015). Design, simulation and comparative analysis of CNT based cascode operational transconductance amplifiers. Nanotechnology,26(39), 395201.

[35]

Loan, S. A., Nizamuddin, M., Alamoud, A. R., & Abbasi, S. A. (2015). Design and comparative analysis of high performance carbon nanotube-based operational transconductance amplifiers. NANO,10(03), 1550039.

[36]

Sharma, J., Ansari, M. S., & Sharma, J. (2014). Current-mode electronically tunable resistor-less universal filter in?±?0.5 V 32 Nm CNFET. In Proceedings of the 2014 international conference on devices, circuits and communications. ICDCCom, 2014, Ranchi, India (pp. 1---6).

[37]

Sharma, J., Ansari, M. S., & Sharma, J. (2014). Electronically tunable resistor-less universal filter in?±?0.5 V 32 nm CNFET. In Proceedings of the 2014 international symposium on electronic system design. ISED, 2014, Surathkal, India (pp. 206---207).

[38]

Natori, K., Kimura, Y., & Shimizu, T. (2005). Characteristics of a carbon nanotube field-effect transistor analyzed as a ballistic nanowire field-effect transistor. Journal of Applied Physics,97(3), 034306.

[39]

Guo, J., Lundstrom, M., & Datta, S. (2002). Performance projections for ballistic carbon nanotube field-effect transistors. Applied Physics Letters,80(17), 3192---3194.

[40]

Deng, J., & Wong, H.-S. P. (2007). A compact SPICE model for carbon-nanotube field-effect transistors including nonidealities and its application--Part I: Model of the intrinsic channel region. IEEE Transactions on Electron Devices,54(12), 3186---3194.

[41]

Deng, J., & Wong, H.-S. P. (2007). A compact SPICE model for carbon-nanotube field-effect transistors including nonidealities and its application--Part II: Full device model and circuit performance benchmarking. IEEE Transactions on Electron Devices,54(12), 3195---3205.

[42]

Sun, Y., & Kursun, V. (2011). N-type carbon-nanotube MOSFET device profile optimization for very large scale integration. Transactions on Electrical and Electronic Materials,12(2), 43---50.

Cited By

Masud MA’ain AKhan IShaikh-Husin N(2021)CNTFET based Voltage Mode MISO Active only Biquadratic Filter for Multi-GHz Frequency ApplicationsCircuits, Systems, and Signal Processing10.1007/s00034-021-01699-540:10(4721-4740)Online publication date: 1-Oct-2021
https://dl.acm.org/doi/10.1007/s00034-021-01699-5

Index Terms

A CNTFET-C first order all pass filter
1. Hardware
2. Networks
  1. Network types
    1. Ad hoc networks
      1. Mobile ad hoc networks

Index terms have been assigned to the content through auto-classification.

Recommendations

First-order voltage-mode all-pass filter employing one active element and one grounded capacitor

A new circuit topology of first-order voltage-mode all-pass filter providing high-input and low-output impedances is described. The filter consists of only one grounded capacitor and one active element, namely VD-DIBA (Voltage Differencing-Differential ...
A 71---76 GHz wideband receiver front-end for phased array applications in 0.13 μm SiGe BiCMOS technology

This paper presents the design of a millimeter-wave wideband receiver front-end in a 0.13 $$\upmu$$ým SiGe BiCMOS technology for phased array applications. The receiver front-end is suitable for a phased array time-division duplexing communication ...
Voltage mode third order quadrature oscillators using OTRAs

In this paper, the authors present two topologies of voltage mode third order quadrature oscillator circuit using operational transresistance amplifier (OTRA). The first circuit is based on low-pass filter and integrator combination, whereas the second ...

Comments

Information & Contributors

Information

Published In

cover image Analog Integrated Circuits and Signal Processing

Analog Integrated Circuits and Signal Processing Volume 100, Issue 2

August 2019

258 pages

ISSN:0925-1030

Issue’s Table of Contents

Copyright © Copyright © 2019 Springer Science+Business Media, LLC, part of Springer Nature.

Publisher

Kluwer Academic Publishers

United States

Publication History

Published: 01 August 2019

Author Tags

Qualifiers

Article

Contributors

Other Metrics

View Article Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

1
Total Citations
View Citations
0
Total Downloads

Downloads (Last 12 months)0
Downloads (Last 6 weeks)0

Reflects downloads up to 03 Sep 2024

Other Metrics

View Author Metrics

Citations

Cited By

Masud MA’ain AKhan IShaikh-Husin N(2021)CNTFET based Voltage Mode MISO Active only Biquadratic Filter for Multi-GHz Frequency ApplicationsCircuits, Systems, and Signal Processing10.1007/s00034-021-01699-540:10(4721-4740)Online publication date: 1-Oct-2021
https://dl.acm.org/doi/10.1007/s00034-021-01699-5

View Options

View options

Get Access

Login options

Check if you have access through your login credentials or your institution to get full access on this article.

Full Access

Get this Publication

Media

Figures

Other

Tables

View Issue’s Table of Contents