- Chemical Physics, Quantum Chemistry, Theoretical Chemistry, Density-functional theory, Computational Chemistry, Condensed Matter Physics, and 7 moreSoft Condensed Matter Physics, Theoretical Condensed Matter Physics, Experimental Physics, Magnetism and Magnetic Materials, Nanotechnology, Nanoparticles, and Nanoscienceedit
AuxFe1−x nanophase thin films of different compositions and thicknesses were prepared by co-deposition magnetron sputtering. Complex morpho-structural and magnetic investigations of the films were performed by X-ray Diffraction,... more
AuxFe1−x nanophase thin films of different compositions and thicknesses were prepared by co-deposition magnetron sputtering. Complex morpho-structural and magnetic investigations of the films were performed by X-ray Diffraction, cross-section Transmission Electron Microscopy, Selected Area Electron Diffraction, Magneto Optical Kerr Effect, Superconducting Quantum Interference Device magnetometry and Conversion Electron Mössbauer Spectroscopy. It was proven that depending on the preparation conditions, different configurations of defect α-Fe magnetic clusters, i.e., randomly distributed or auto-assembled in lamellar or filiform configurations, can be formed in the Au matrix. A close relationship between the Fe clustering process and the type of the crystalline structure of the Au matrix was underlined, with the stabilization of a hexagonal phase at a composition close to 70 at. % of Au and at optimal thickness. Due to different types of inter-cluster magnetic interactions and spin an...
Research Interests:
A convenient and low-cost sol–gel approach for the one-step synthesis of ZnO–P2O5–rGO nanostructures with tuned bandgap and fluorescence was investigated. The obtained hybrid nanostructures exploit the properties of zinc oxide, graphene... more
A convenient and low-cost sol–gel approach for the one-step synthesis of ZnO–P2O5–rGO nanostructures with tuned bandgap and fluorescence was investigated. The obtained hybrid nanostructures exploit the properties of zinc oxide, graphene oxide and phosphorous oxide as promising candidates for a wide range of optoelectronic applications. A predominant amorphous structure, ZnO–P2O5–rGO, containing ZnO nanorods was evidenced by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). The estimated size of the ZnO nanorods in nanostructures with P2O5 was noticed to decrease when the P2O5/ZnO ratio was increased. The presence of ZnO, P2O5 and rGO was confirmed by Fourier-transform infrared spectroscopy (FTIR) and Raman investigation. P2O5 was noticed to tune the bandgap and the fluorescence emissions of the nanostructured films, as estimated by UV–Vis–NIR and fluorescence spectroscopy, respectively. The electrical measurements performed at room temperature showed that the ...
Research Interests:
Multifunctional magnetic nanocomposites are among those heterogeneous nanosized systems where at least one phase component is magnetic and can act as an intermediate of either the actuation or the response of the overall system. The main... more
Multifunctional magnetic nanocomposites are among those heterogeneous nanosized systems where at least one phase component is magnetic and can act as an intermediate of either the actuation or the response of the overall system. The main advantage of heterogeneous nanosystems is the possibility of combining and inter-influencing the electronic properties of constituent interfaced nanophases. Consequently, unique physico-chemical properties of the hybrid materials of interest in various applications can be obtained. This Special Issue of Nanomaterials highlights the most advanced processing and characterization tools of some multifunctional magnetic nanocomposites and heterogeneous systems of interest in various applications, from biomedicine to sensoristics and energy-saving materials.
Research Interests:
Magnetic perovskite films have promising properties for use in energy-efficient spintronic devices and magnetic refrigeration. Here, an epitaxial ferromagnetic La0.67Ba0.33Mn0.95Ti0.05O3 (LBMTO-5) thin film was grown on SrTiO3(001) single... more
Magnetic perovskite films have promising properties for use in energy-efficient spintronic devices and magnetic refrigeration. Here, an epitaxial ferromagnetic La0.67Ba0.33Mn0.95Ti0.05O3 (LBMTO-5) thin film was grown on SrTiO3(001) single crystal substrate by pulsed laser deposition. High-resolution X-ray diffraction proved the high crystallinity of the film with tetragonal symmetry. The magnetic, magnetocaloric and magnetoresistance properties at different directions of the applied magnetic field with respect to the ab plane of the film were investigated. An in-plane uni-axial magnetic anisotropy was evidenced. The LBMTO-5 epilayer exhibits a second-order ferromagnetic-paramagnetic phase transition around 234 K together with a metal–semiconductor transition close to this Curie temperature (TC). The magnetic entropy variation under 5 T induction of a magnetic field applied parallel to the film surface reaches a maximum of 17.27 mJ/cm3 K. The relative cooling power is 1400 mJ/cm3 K (...
Research Interests:
The manipulation of magnetic anisotropy represents the fundamental prerequisite for the application of magnetic materials. Here we present the vectorial magnetic properties of nanostructured systems and thin films of Fe and FeCo prepared... more
The manipulation of magnetic anisotropy represents the fundamental prerequisite for the application of magnetic materials. Here we present the vectorial magnetic properties of nanostructured systems and thin films of Fe and FeCo prepared on linearly trenched Mo templates with thermally controlled periodicity. The magnetic properties of the nanosystems are engineered by tuning the shape, size, thickness, and composition parameters of the thin films. Thus, we control coercivity, magnetization, orientation of the easy axis of magnetization, and the long-range magnetic order of the system in the function of the temperature. We distinguish magnetic components that emerge from the complex morpho-structural features of the undulating Fe or FeCo nanostructured films on trenched Mo templates: (i) assembly of magnetic nanowires and (ii) assembly of magnetic islands/clusters. Uniaxial anisotropy at room temperature was proven, characterized, and explained in the case of all systems. Our work c...
Research Interests:
Fe-B based compounds are of high interest due to their special properties and the wide range of involved applications. While B is the element that facilitates the increase in the hardness and the degree of wear resistance, it is also an... more
Fe-B based compounds are of high interest due to their special properties and the wide range of involved applications. While B is the element that facilitates the increase in the hardness and the degree of wear resistance, it is also an effective glass former, controlling the formation of a much-desired amorphous structure with specific magnetic properties. Major difficulties related to the proper engineering of Fe-B thin films lay especially in their preparation under well-defined compositions, which in turn, should be accurately determined. The present study closely analyzes the morpho-structural and magnetic properties of thin coatings of Fe-B of approximately 100 nm thickness and with the nominal B content ranging from 5 at. % to 50 at. %. The comparison between films obtained by two preparation methods, namely, the thermionic vacuum arc and the magnetron sputtering is envisaged. Morpho-structural properties were highlighted using X-ray diffraction supplemented with X-ray reflec...
Research Interests:
Epitaxial La0.7Sr0.3MnO3 films with different thicknesses (9–90 nm) were deposited on SrTiO3 (0 0 1) substrates by pulsed laser deposition. The films have been investigated with respect to morpho-structural, magnetic, and... more
Epitaxial La0.7Sr0.3MnO3 films with different thicknesses (9–90 nm) were deposited on SrTiO3 (0 0 1) substrates by pulsed laser deposition. The films have been investigated with respect to morpho-structural, magnetic, and magneto-transport properties, which have been proven to be thickness dependent. Magnetic contributions with different switching mechanisms were evidenced, depending on the perovskite film thickness. The Curie temperature increases with the film thickness. In addition, colossal magnetoresistance effects of up to 29% above room temperature were evidenced and discussed in respect to the magnetic behavior and film thickness.
Research Interests:
Issues related to the optimization of heat transfer mechanisms dominated by superparamagnetic relaxation are considered in the case of AC (alternating current) magnetic field hyperthermia procedures. The key role in the conversion of... more
Issues related to the optimization of heat transfer mechanisms dominated by superparamagnetic relaxation are considered in the case of AC (alternating current) magnetic field hyperthermia procedures. The key role in the conversion of electromagnetic energy to the thermal one via the superparamagnetic relaxation mechanism is played by the magnetic anisotropy of nanoparticles, easily to be controlled via the shape anisotropy component. The optimization process has been discussed in the case of magnetite (Fe 3 O 4 ) ellipsoidal nanoparticles with dominant shape anisotropy dispersed in different media. Nanoparticles of different sizes and aspect ratios have been considered in correlation with those specific parameters of the actuating AC magnetic field which respect an established biological safely criterion. It has been proven that the dissipated power can be maximized for a given set of biological compatible RF (radiofrequency) field parameters (frequency and field amplitude at the sample space) only for specific pairs of particle sizes and aspect ratios. For instance, it has been shown that ellipsoidal magnetite nanoparticles with 10 nm equatorial size and aspect ratio of 2 are optimal for a maximum transferred power under radiofrequency excitations of 250 kHz and field amplitude of 20 kA/m, if high viscosity dispersion media are used. The methodology for deriving the optimal shape (geometrical) parameters of a specific type of nanoparticles in conditions of using available radiofrequency excitations, or vice versa, for deriving the optimal radiofrequency working parameters in the case of ferrofluids with specific nanoparticles (type and geometry) is described and discussed in detail.
Research Interests:
Nanoscale thermometers with high sensitivity are needed in domains which study quantum and classical effects at cryogenic temperatures. Here, we present a micrometer sized and nanometer thick chromium selenide cryogenic temperature sensor... more
Nanoscale thermometers with high sensitivity are needed in domains which study quantum and classical effects at cryogenic temperatures. Here, we present a micrometer sized and nanometer thick chromium selenide cryogenic temperature sensor capable of measuring a large domain of cryogenic temperatures down to tenths of K. Hexagonal Cr-Se flakes were obtained by a simple physical vapor transport method and investigated using scanning electron microscopy, energy dispersive X-ray spectrometry and X-ray photoelectron spectroscopy measurements. The flakes were transferred onto Au contacts using a dry transfer method and resistivity measurements were performed in a temperature range from 7 K to 300 K. The collected data have been fitted by exponential functions. The excellent fit quality allowed for the further extrapolation of resistivity values down to tenths of K. It has been shown that the logarithmic sensitivity of the sensor computed over a large domain of cryogenic temperature is hig...
Research Interests:
MoO2-Fe2O3 nanoparticle systems were successfully synthesized by mechanochemical activation of MoO2 and α-Fe2O3 equimolar mixtures throughout 0–12 h of ball-milling. The role of the long-range ferromagnetism of MoO2 on a fraction of more... more
MoO2-Fe2O3 nanoparticle systems were successfully synthesized by mechanochemical activation of MoO2 and α-Fe2O3 equimolar mixtures throughout 0–12 h of ball-milling. The role of the long-range ferromagnetism of MoO2 on a fraction of more defect hematite nanoparticles supporting a defect antiferromagnetic phase down to the lowest temperatures was investigated in this work. The structure and the size evolution of the nanoparticles were investigated by X-ray diffraction, whereas the magnetic properties were investigated by SQUID magnetometry. The local electronic structure and the specific phase evolution in the analyzed system versus the milling time were investigated by temperature-dependent Mössbauer spectroscopy. The substantially shifted magnetic hysteresis loops were interpreted in terms of the unidirectional anisotropy induced by pinning the long-range ferromagnetic order of the local net magnetic moments in the defect antiferromagnetic phase, as mediated by the diluted magnetic...
Research Interests:
We report the facile and low-cost preparation as well as detailed characterization of dense arrays of passivated ferromagnetic nickel (Ni) nanotubes (NTs) vertically-supported onto solid Au-coated Si substrates. The proposed fabrication... more
We report the facile and low-cost preparation as well as detailed characterization of dense arrays of passivated ferromagnetic nickel (Ni) nanotubes (NTs) vertically-supported onto solid Au-coated Si substrates. The proposed fabrication method relies on electrochemical synthesis within the nanopores of a supported anodic aluminum oxide (AAO) template and allows for fine tuning of the NTs ferromagnetic walls just by changing the cathodic reduction potential during the nanostructures’ electrochemical growth. Subsequently, the experimental platform allowed further passivation of the Ni NTs with the formation of ultra-thin antiferromagnetic layers of nickel oxide (NiO). Using adequately adapted magnetic measurements, we afterwards demonstrated that the thickness of the NT walls and of the thin antiferromagneticNiO layer, strongly influences the magnetic behavior of the dense array of exchange-coupled Ni/NiO NTs. The specific magnetic properties of these hybrid ferromagnetic/antiferromag...
Research Interests:
Research Interests:
“Vinca” Institute of Nuclear Sciences MAGBIOVIN project Conference: "Magnetic nanoparticles and their applications in medicine" Date: April 4-5, 2019. Venue: Rectorate of the University of Belgrade, Studentski Trg 1, Belgrade Conference organizer: Project MAGBIOVIN, “Vinca” Institute of Nuclear Sciemore
Biomedical Applications of Radionuclide-Labelled Magnetic Nanoparticles Quentin A. Pankhurst Healthcare Biomagnetics Laboratory, University College London, London W1S 4BS q.pankhurst@ucl.ac.uk ‘Healthcare Biomagnetics’ – the sensing,... more
Biomedical Applications of Radionuclide-Labelled Magnetic Nanoparticles Quentin A. Pankhurst Healthcare Biomagnetics Laboratory, University College London, London W1S 4BS q.pankhurst@ucl.ac.uk ‘Healthcare Biomagnetics’ – the sensing, moving and heating of magnetic nanoparticles in vitro or in the human body – offers the potential for safe and convenient alternatives for many therapeutic and diagnostic applications. This is leading to the development of products such as remote sensors, mechanical actuators, and therapeutic heat sources. In this lecture a selection of recent examples of this work will be presented and discussed, with a particular focus on applications involving the use of radionuclide-labelled magnetic nanoparticles.
This work investigates the structural, magnetic and magneto-optical properties of a new zinc phosphate-tellurite glass belonging to the 45ZnO-10Al2O3-40P2O5-5TeO2 system. The glass was prepared by a wet method of processing the starting... more
This work investigates the structural, magnetic and magneto-optical properties of a new zinc phosphate-tellurite glass belonging to the 45ZnO-10Al2O3-40P2O5-5TeO2 system. The glass was prepared by a wet method of processing the starting reagents followed by suitable melting–stirring–quenching–annealing steps. Specific parameters such as density, average molecular mass, molar volume, oxygen packaging density, refractive index, molar refractivity, electronic polarizability, reflection loss, optical transmission, band gap and optical basicity have been reported together with thermal, magnetic and magneto-optical characteristics. Absorption bands appear in the blue and red visible region, while over 600 nm the glass becomes more transparent. FTIR and Raman spectra evidenced phosphate-tellurite vibration modes proving the P2O5 and TeO2 network forming role. Magnetic measurements reveal the diamagnetic character of the Te-doped glass with an additional weak ferromagnetic signal, specific ...
Research Interests:
A facile and cheap surfactant-assisted hydrothermal method was used to prepare mesoporous cobalt ferrite nanosystems with BET surface area up to 151 m2/g. These mesostructures with high BET surface areas and pore sizes are made from... more
A facile and cheap surfactant-assisted hydrothermal method was used to prepare mesoporous cobalt ferrite nanosystems with BET surface area up to 151 m2/g. These mesostructures with high BET surface areas and pore sizes are made from assemblies of nanoparticles (NPs) with average sizes between 7.8 and 9.6 nm depending on the initial pH conditions. The pH proved to be the key factor for controlling not only NP size, but also the phase purity and the porosity properties of the mesostructures. At pH values lower than 7, a parasite hematite phase begins to form. The sample obtained at pH = 7.3 has magnetization at saturation Ms = 38 emu/g at 300 K (54.3 emu/g at 10 K) and BET surface area SBET = 151 m2/g, whereas the one obtained at pH = 8.3 has Ms = 68 emu/g at 300 K (83.6 emu/g at 10 K) and SBET = 101 m2/g. The magnetic coercive field values at 10 K are high at up to 12,780 Oe, with a maximum coercive field reached for the sample obtained at pH = 8.3. Decreased magnetic performances ar...
Research Interests:
Magnetic iron oxide particles are used for in vitro diagnostics for nearly 40 years. Due to their unique physical, chemical, thermal and mechanical properties, as well as biocompatibility and low toxicity in the human body, iron oxide... more
Magnetic iron oxide particles are used for in vitro diagnostics for nearly 40 years. Due to their unique physical, chemical, thermal and mechanical properties, as well as biocompatibility and low toxicity in the human body, iron oxide nanoparticles have been used in many biomedical applications, such as contrast agents for magnetic resonance imaging, carriers for controlled drug delivery and immunoassays, but also in magnetic hyperthermia. Our aim is to investigate the effect of pressure and temperature on the structural, thermal and magnetic properties of iron oxide nanomaterials prepared by hydrothermal synthesis. Iron oxide nanoparticles were synthesized at temperatures of 100-200°C and pressures of 20-1000 bar. It has been found that pressure influences the type of iron oxide crystalline phase. Thus, for lower pressure values (< 100 bar), iron oxide is predominantly formed as hematite, while at pressures > 100 bar, the major crystalline phase is goethite. The complex therm...
Research Interests:
A critical discussion on the presently available models for the relaxation time of magnetic nanoparticles approaching the superparamagnetic regime in the presence of interparticle dipolar interactions is considered. The direct... more
A critical discussion on the presently available models for the relaxation time of magnetic nanoparticles approaching the superparamagnetic regime in the presence of interparticle dipolar interactions is considered. The direct implications of such interactions for magnetic fluid hyperthermia therapy through susceptibility loss mechanisms give rise to an indirect method for their study via specific absorption rate measurements performed on ferrofluids of different volume fractions. The theoretical support for the specific evolution of the relaxation time constant and the anisotropy energy barrier versus the interparticle interactions in a perturbation approach of the simple Néel expression for the relaxation time is provided via static and time-dependent micromagnetic simulations.
Research Interests:
Epitaxial La0.67Ba0.33Ti0.02Mn0.98O3 (denoted as LBTMO hereafter) thin films of approximately 95 nm thickness were deposited by a pulsed laser deposition technique onto SrTiO3 (STO) (001) substrates.
Research Interests:
Research Interests:
We present a 57Fe Mo¨ssbauer spectral study of the RFe11.5Ta0.5 compounds, with R = Tb, Dy, Ho, Er and Lu. The Mo¨ssbauer spectra have been analyzed with a model that considers both the distribution of the tantalum atom in the... more
We present a 57Fe Mo¨ssbauer spectral study of the RFe11.5Ta0.5 compounds, with R = Tb, Dy, Ho, Er and Lu. The Mo¨ssbauer spectra have been analyzed with a model that considers both the distribution of the tantalum atom in the near-neighbor environment of the iron atoms and the influence of the easy magnetization direction. The assignment of the hyperfine fields
Research Interests:
Research Interests:
Research Interests:
FeatC) nanoparticles have been successfully synthesized using the laser pyrolysis method and variable nozzle geometries. At large nozzle diameters, XRD and SAED analysis clearly identified distinct alpha-Fe and Fe3C phases. TEM and HRTEM... more
FeatC) nanoparticles have been successfully synthesized using the laser pyrolysis method and variable nozzle geometries. At large nozzle diameters, XRD and SAED analysis clearly identified distinct alpha-Fe and Fe3C phases. TEM and HRTEM indicated that these Fe-based nanoparticles have an average grain size of 3.5-10.2 nm. Temperature dependent Mössbauer spectra further confirm their distinct nanophases. By using a multi-step reduction
Research Interests:
Research Interests:
Research Interests:
Research Interests:
A Mössbauer and magnetic study of FeRh has been undertaken in order to understand better the remarkable properties of both melt-spun BCC and ball-milled FCC-phases of the anti-invar FeRh alloy.
Research Interests:
Research Interests:
Research Interests:
Research Interests:
Research Interests:
Research Interests:
The frustration of the trinuclear clusters with antiferromagnetic intracluster interaction was investigated at low temperature and in applied magnetic field, by Mössbauer, susceptibility and magnetisation measurements. The spin... more
The frustration of the trinuclear clusters with antiferromagnetic intracluster interaction was investigated at low temperature and in applied magnetic field, by Mössbauer, susceptibility and magnetisation measurements. The spin configuration and the electronic state are described as a function of the temperature and the intensity of the applied field. The values of the exchange integrals are provided.
Research Interests:
Research Interests:
Arrays of magnetic Ni-Cu alloy nanowires with different compositions were prepared by a template-replication technique using electrochemical deposition into polycarbonate nanoporous membranes. Photolithography was employed for obtaining... more
Arrays of magnetic Ni-Cu alloy nanowires with different compositions were prepared by a template-replication technique using electrochemical deposition into polycarbonate nanoporous membranes. Photolithography was employed for obtaining interdigitated metallic electrode systems of Ti/Au onto SiO/Si substrates and subsequent electron beam lithography was used for contacting single nanowires in order to investigate their galvano-magnetic properties. The results of the magnetoresistance measurements made on single Ni-Cu alloy nanowires of different compositions have been reported and discussed in detail. A direct methodology for transforming the magnetoresistance data into the corresponding magnetic hysteresis loops was proposed, opening new possibilities for an easy magnetic investigation of single magnetic nanowires in the peculiar cases of Stoner-Wohlfarth-like magnetization reversal mechanisms. The magnetic parameters of single Ni-Cu nanowires of different Ni content have been esti...
ABSTRACT
Research Interests:
Research Interests:
ABSTRACT The aim of this paper is to present a reliable procedure for the experimental determination of the specific absorption rate (SAR) in case of superparamagnetic Fe oxide nanoparticles dispersed in liquid environments. It is based... more
ABSTRACT The aim of this paper is to present a reliable procedure for the experimental determination of the specific absorption rate (SAR) in case of superparamagnetic Fe oxide nanoparticles dispersed in liquid environments. It is based on the acquisition of consecutive steps of time-temperature dependences along of both heating and cooling processes. Linear fitting of these recorded steps provides the heating and cooling speeds at different temperatures, which finally allow the determination of the heating profile in adiabatic-like conditions over a broad temperature range. The presented methodology represents on one hand, a useful alternative tool for the experimental evaluation of the heating capability of nanoparticulate systems for magnetic hyperthermia applications and on the other hand, gives support for a more accurate modeling of bio-heat transfer phenomena.
Research Interests:
Research Interests:
The simultaneous discharge of Fe (or Co) and, respectively, Cu metal sources via thermionic vacuum arc (TVA) was used as a new processing method to obtain granular magneto-resistive films. The nano-structured films with thicknesses of 120... more
The simultaneous discharge of Fe (or Co) and, respectively, Cu metal sources via thermionic vacuum arc (TVA) was used as a new processing method to obtain granular magneto-resistive films. The nano-structured films with thicknesses of 120 ± 1 nm and 250 ± 1 nm were obtained in definite conditions and subsequently characterized via electrical measurements at room temperature, in applied magnetic field. The paper reveals the importance of different specific factors (from size and dispersion effects to annealing influence) on the magnetoresistance behavior. A special contribution of the Mössbauer Spectroscopy, concerning the local structure and interactions as well as the magnetic phase characterization, was emphasized.
Research Interests:
Fe and Fe-Cr-Al thin films, both as sputtered on Si substrates as well as after subsequent annealing treatments in hydrogen atmosphere, have been investigated by means of X-ray reflectometry, magneto-optic Kerr effect and Mössbauer... more
Fe and Fe-Cr-Al thin films, both as sputtered on Si substrates as well as after subsequent annealing treatments in hydrogen atmosphere, have been investigated by means of X-ray reflectometry, magneto-optic Kerr effect and Mössbauer spectroscopy with respect to structural and related magnetic characteristics. The as deposited films are showing chemically disordered bcc structures, assigned to Fe-Si and Fe-Cr-Al-Si phases, respectively, with soft magnetism and magnetic texture, both influenced by the presence of Si, Cr and Al atoms. The softness of the films as well as the magnetic texture are strongly modified via hydrogenation treatments. In addition, such treatments induce the expulsion of Si, Cr and Al atoms from the as deposited phases, providing almost pure Fe films of much well crystallized bcc structure.
Research Interests:
Research Interests:
Double perovskite Sr2FeMoO6 type compounds show special properties, such as magnetoresistance response at relatively small-applied fields and at rather high temperatures (ca. 400 K). Perovskite precursors were obtained unconventionally,... more
Double perovskite Sr2FeMoO6 type compounds show special properties, such as magnetoresistance response at relatively small-applied fields and at rather high temperatures (ca. 400 K). Perovskite precursors were obtained unconventionally, in liquid phase, using oxalic acid as complexing agent, in the presence of ethylene glycol as polymerization agent. Ordering control concerning the magnetic properties is predictable to be strongly influenced by the synthesis route. The thermal stability of the precursors and the phase transitions of the oxide samples were analyzed by thermal analysis method, IR spectroscopy, Mossbauer spectroscopy, X-ray diffraction method and magnetic measurements. The experimental data for the perovskite compounds prepared by using oxalic acid as complexing agent revealed a double perovskite structure of analyzed samples, convenient magnetorezistive response (3.51 µ B /f.u), in good agreement with the Mossbauer spectra. Moreover, Mossbauer spectreoscopy allows the...