In this report a circuit laboratory will be developed where the design and resolution of two voltage sources using different types of diodes will be performed. The above mentioned will be promoted through the practice of the knowledge and... more
In this report a circuit laboratory will be developed where the design and resolution of two voltage sources using different types of diodes will be performed. The above mentioned will be promoted through the practice of the knowledge and tools learned in class such as: theory of diode approximation, theory and components of signal rectification circuits and zener diode theory; In turn, the knowledge acquired in previous courses will also be used, some examples of these are the methods of nodes and meshes, Kirchoff's current law, Kirchoff's voltage law, ohm law, format approximation, voltage and current divider. And finally, both the analysis by simulation with the Multisim program and the assembly of the circuits in the laboratory will be carried out in order to make a comparison of these values with those obtained theoretically, this through the calculation of the error.
Se muestra como diseñar una fuente de voltaje estabilizada con Zener, a partir de un rectificador de onda completa tipo puente, con filtro capacitivo, cómo seleccionar resistencia limitadora y condensador de filtro, entre otros datos.
