Surface Acoustic Waves

We demonstrate a simple and efficient device for the continuous label-free separation of microparticles using travelling surface acoustic waves (TSAW). A focusing interdigitated unidirectional transducer released high frequency (133.3 MHz) TSAW normal to the fluid flow direction to segregate 3 mm particles from 10 mm particles with a separation efficiency of 100%. The TSAW based separator does not necessitate a tight alignment of the PDMS microchannel with the transducer.

Acoustic force patterning is an emerging technology that provides a platform to control the spatial location of cells in a rapid, accurate, yet contactless manner. However, very few studies have been reported on the usage of acoustic force patterning for the rapid arrangement of biological objects, such as cells, in a three-dimensional (3D) environment. In this study, we report on a bio-acoustic force patterning technique, which uses surface acoustic waves (SAWs) for the rapid arrangement of cells within an extracellular matrix (ECM)-based hydrogel such as gelatin methacryloyl (GelMA). A proof-of-principle was achieved through both simulations and experiments based on the in-house fabricated piezoelectric SAW transducers, which enabled us to explore the effects of various parameters on the performance of the built construct. The SAWs were applied in a fashion that generated standing SAWs (SSAWs) on the substrate, the energy of which subsequently was transferred into the gel, creating a rapid, yet contactless alignment of the cells (< 10 seconds, based on the experimental conditions). Following UV radiation induced photo-crosslinking of the cell encapsulated GelMA pre-polymer solution, the patterned cardiac cells readily spread after alignment in the GelMA hydrogel and demonstrated beating activity in 5-7 days. The described acoustic force assembly method can be utilized not only to control the spatial distribution of the cells inside a 3D construct, but can also preserve the viability and functionality of the patterned cells (e.g. beating rates of cardiac cells). This platform can be potentially employed in a diverse range of applications, whether it is for tissue engineering, in vitro cell studies, or creating 3D biomimetic tissue structures.

We report an experimental technique that integrates high-frequency surface acoustic waves ͑SAWs͒ with high-frequency electron paramagnetic resonance ͑HFEPR͒ spectroscopy in order to measure spin dynamics on fast time scales in single-molecule magnets. After the system is driven out of equilibrium by triggering magnetic avalanches, or simply by heating with short SAW pulses, the evolution of the spin populations within fixed energy levels is measured using HFEPR spectroscopy.