Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    GSM Based Monthly Electricity Energy Meter Billing With Sms and Display To The User

    Uploaded by

    Rahul Parmar
    This project involves developing an energy meter that can monitor monthly electricity usage and send billing information via SMS and display readings. The energy meter is connected to a microcontroller via an optocoupler that counts pulses from the meter. The microcontroller then displays readings on an LCD and sends the data to the user's phone through a GSM modem. It uses common electronic components like a transformer, rectifier, regulator, and microcontroller to power the system and process the meter readings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    GSM Based Monthly Electricity Energy Meter Billing With Sms and Display To The User

    Uploaded by

    Rahul Parmar
    31 views2 pages
    This project involves developing an energy meter that can monitor monthly electricity usage and send billing information via SMS and display readings. The energy meter is connected to a microcontroller via an optocoupler that counts pulses from the meter. The microcontroller then displays readings on an LCD and sends the data to the user's phone through a GSM modem. It uses common electronic components like a transformer, rectifier, regulator, and microcontroller to power the system and process the meter readings.

    Original Title

    147

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This project involves developing an energy meter that can monitor monthly electricity usage and send billing information via SMS and display readings. The energy meter is connected to a microcontroller via an optocoupler that counts pulses from the meter. The microcontroller then displays readings on an LCD and sends the data to the user's phone through a GSM modem. It uses common electronic components like a transformer, rectifier, regulator, and microcontroller to power the system and process the meter readings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    GSM Based Monthly Electricity Energy Meter Billing With Sms and Display To The User

    Uploaded by

    Rahul Parmar
    This project involves developing an energy meter that can monitor monthly electricity usage and send billing information via SMS and display readings. The energy meter is connected to a microcontroller via an optocoupler that counts pulses from the meter. The microcontroller then displays readings on an LCD and sends the data to the user's phone through a GSM modem. It uses common electronic components like a transformer, rectifier, regulator, and microcontroller to power the system and process the meter readings.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Project Serial No: 147

    GSM BASED MONTHLY ELECTRICITY ENERGY METER BILLING WITH SMS AND DISPLAY TO THE USER
    Abstract:
    The main objective of the project is to develop an energy meter to know the exact billing that each load is going to consumed with wireless technology. For this research work we had taken a energy meter and is connected to an Optocoupler, which counts the led that glows (depending upon the requirement we can increase the led glowing on/off time pulses), so its gives an interrupt after every time set by us is given to a programmable micro controller of 8051 family, The microcontroller takes the reading from the energy meter via an Opto-isolator and displays the reading on the LCD duly interface to a microcontroller. The reading of the energy meter is also sent to the cell phone of the user by a message through GSM modem being fed from the microcontroller via level shifter IC and RS232 link. The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components.

    Project Serial No: 147

    BLOCK DIAGRAM

    HARDWARE REQUIREMENTS: Microcontroller (AT89C52/S52), Max232, GSM module, LCD(16x2), LED, Crystal Oscillator, Resistors, Capacitors, Diodes, Transformer, Regulator, Opto Isolator, Energy Meter, Lamp.

    SOFTWARE REQUIREMENTS: Keil compiler, Language: Embedded C Or Assembly

    You might also like