Uni- and Bipolar Hall IC Switches for Magnetic Field Applications

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L
Bipolar IC

Features Temperature compensated magnetic performance Digital output signal For unipolar and alternating magnetic fields Large temperature range Protection against reversed polarity Output protection against electrical disturbances P-SSO-3-2

Type TLE 4905 L TLE 4935 L TLE 4935-2 L TLE 4945 L TLE 4945-2L

Marking 05 L 35 L 35 2 45 L 45 2

Ordering Code Q67006-A9120 Q67006-A9112 Q67006-A9143 Q67006-A9163 Q62705-K441

Package P-SSO-3-2 P-SSO-3-2 P-SSO-3-2 P-SSO-3-2 P-SSO-3-2

TLE 4905/35/35-2/45/45-2 L (Unipolar/Bipolar Magnetic Field Switches) have been designed specifically for automotive and industrial applications. Reverse polarity protection is included on-chip as is output protection against negative voltage transients. Typical applications are position/proximity indicators, brushless DC motor commutation, rotational indexing etc.

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Pin Configuration (view on branded side of component)

VS

GND

Q
AEP01364

Figure 1 Pin Definitions and Functions Pin No. 1 2 3 Symbol Function Supply voltage Ground Output

VS
GND

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Circuit Description The circuit includes Hall generator, amplifier and Schmitt-Trigger on one chip. The internal reference provides the supply voltage for the components. A magnetic field perpendicular to the chip surface induces a voltage at the hall probe. This voltage is amplified and switches a Schmitt-trigger with open-collector output. A protection diode against reverse power supply is integrated. The output is protected against electrical disturbances.

Threshold Generator

VS

1 HallGenerator

VS VRef

Amplifier

SchmittTrigger Output Stage

2 GND

Figure 2 Block Diagram

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Functional Description Unipolar Type TLE 4905 (Figure 3 and 4) When a positive magnetic field is applied in the indicated direction (Figure 3) and the turn-on magnetic induction BOP is exceeded, the output of the Hall-effect IC will conduct (Operate Point). When the current is reduced, the output of the IC turns off (Release Point; Figure 4).
+ Branded Side

VQ

VS

AES01231

Figure 3 Sensor/Magnetic-Field Configuration

BOP BRP
0 Induction

VQ VQH
Output Voltage

VQL t
AED01420

Figure 4 Switching Characteristics Unipolar Type

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Functional Description Bipolar Type TLE 4935/35-2/45 (Figure 5 and 6) When a positive magnetic field is applied in the indicated direction (Figure 5) and the turn-on magnetic induction BOP is exceeded, the output of the Hall-effect IC will conduct (Operate Point). When a reverse magnetic field is generated, the output of the IC turns off (Release Point; Figure 6).
+ Branded Side

VQ

VS

AES01231

Figure 5 Sensor/Magnetic-Field Configuration

BOP
0

t BRP

Induction

VQ VQH
Output Voltage

VQL t
AED01421

Figure 6 Switching Characteristics Bipolar Type

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Absolute Maximum Ratings Tj = 40 to 150 C Parameter Supply voltage Supply voltage Output voltage Output current Output reverse current Junction temperature Junction temperature Junction temperature Storage temperature Thermal resistance Symbol Limit Values Unit Remarks min. max. 32 40 32 100 100 150 170 210 150 190 V V V mA mA C C C C 40 40 50

VS VS VQ IQ IQ Tj Tj Tj Tstg Rth JA

t < 400 ms; = 0.1

K/W

Note: Stresses above those listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Operating Range Parameter Supply voltage Junction temperature Junction temperature Symbol Limit Values Unit Remarks min. max. 24 150 170 V C C thresholds may exceed the limits 3.8 40 40

VS Tj Tj

Note: In the operating range the functions given in the circuit description are fulfilled.

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

AC/DC Characteristics 3.8 V VS 24 V; 40 C Tj 150 C Parameter Supply current Symbol Limit Values min. typ. 3 4 0.25 max. 7 8 0.5 10 1 mA mA V A s B < BRP B > BOP Unit Test Condition Test Circuit 1 1 1 1 1

ISHigh ISLow Output saturation VQSat

IQ = 40 mA VQ = 24 V RL = 1.2 k CL 33 pF

IQL tr / tf

Note: The listed characteristics are ensured over the operating range of the integrated circuit. Typical characteristics specify mean values expected over the production spread. If not otherwise specified, typical characteristics apply at Tj = 25 C and the given supply voltage.

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Magnetic Characteristics 3.8 V VS 24 V Parameter Symbol TLE 4905 unipolar TLE 4935 bipolar latch Limit Values TLE 4935-2 bipolar latch TLE 4945 bipolar switch TLE 4945-2 bipolar switch Unit

min. max. min. max. min. max. min. max. min. max. Junction Temperature Tj = 40 C Turn-ON induction Turn-OFF induction Hysteresis (BOP-BRP) BOP BRP BHY 7.5 5.5 2 19 17 6.5 10 20 20 20 10 40 15 27 30 27 15 54 6 10 3 6 1 6 3 5 mT mT mT

10 6 2 10

Junction Temperature Tj = 25 C Turn-ON induction Turn-OFF induction Hysteresis (BOP-BRP) BOP BRP BHY 7 5 2 18 16 6 10 20 20 20 10 40 14 26 28 26 14 52 6 10 3 6 1 6 3 5 mT mT mT

10 6 2 10

Junction Temperature Tj = 85 C Turn-ON induction Turn-OFF induction Hysteresis (BOP-BRP) BOP BRP BHY 6.5 4.5 2 17.5 15 5.5 10 20 20 20 10 40 13 26 26 26 13 52 6 10 3 6 1 6 3 5 mT mT mT

10 6 2 10

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Magnetic Characteristics (contd) 3.8 V VS 24 V Parameter Symbol TLE 4905 unipolar TLE 4935 bipolar latch Limit Values TLE 4935-2 bipolar latch TLE 4945 bipolar switch TLE 4945-2 bipolar switch Unit

min. max. min. max. min. max. min. max. min. max. Junction Temperature Tj = 150 C Turn-ON induction Turn-OFF induction Hysteresis (BOP-BRP) BOP BRP BHY 6 4 2 17 14 5 10 20 20 20 10 40 12 25 24 25 12 50 6 10 3 6 1 6 3 5 mT mT mT

10 6 2 10

Note: The listed characteristics are ensured over the operating range of the integrated circuit. Typical characteristics specify mean values expected over the production spread. If not otherwise specified, typical characteristics apply at Tj = 25 C and the given supply voltage.

Data Sheet

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

VS

S 1
+ 4.7 nF 2

VS

RL CL

GND

TLE 4905/35/35-2/45-2

Q
AES01244

Unipolar Type TLE 4905

Bipolar Type TLE 4935

VQL
0

VQL B RP B HY B OP B B RP
0 B HY

B OP

B
AED01422

VQ VQH
0.9 VQH

0.1VQH

t tr tf
AED01246

Figure 7 Test Circuit 1

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Mainframe

Line 1 4.7 nF 1.2 k 4.7 nF 2

Sensor

VS

VS

GND

TLE 4905/35/35-2/45-2

Signal

AES01247

Figure 8 Application Circuit

Data Sheet

11

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Quiescent Current versus Supply Voltage

Quiescent Current versus Junction Temperature

VQ = High

VQ = High
6

T j = -40 C T j = 150 C

VS = 24 V VS = 4.0 V

0 0 5 10 15 V 25

0 -50

50

100

C
Tj

200

VS

Quiescent Current Difference versus Temperature

Saturation Voltage versus Output Current

S
mA S = SLow - SHigh 0.75

VQ

V 1.0
_V < _ 24 V 3.8 V < S

Q = 40 mA
0.8

0.5

0.6

T j = 125 C

0.4
0.25

0.2

T j = -40 C

0 -40

50

100

150 C 200

20

40

60

mA

100

Tj

Data Sheet

12

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

TLE 4905 Operate-and Release-Point versus Junction Temperature

TLE 4905 Hysteresis versus Junction Temperature

mT 20

_V < _ 24 V 3.8 V < S

B
mT 6

_V < _ 24 V 3.8 V < S

B OPmax
15

B HYmax

B RPmax
4

B OPtyp
10

B RPtyp B OPmin B RPmin

B HYtyp

B HYmin

0 -40

50

100

C
Tj

200

0 -40

50

100

C
Tj

200

TLE 4935 Operate-and Release-Point versus Junction Temperature

TLE 4935-2 Operate-and Release-Point versus Junction Temperature

B
mT 20

_V < _ 24 V 3.8 V < S

mT 20

_V < _ 24 V 3.8 V < S B OPmax

B OPmax B OPtyp

B OPtyp B OPmin

10

B OPmin

10

0
0

-10

B RPmax
-10

B RPmax
-20

B RPtyp B RPmin

B RPtyp
-20 -40 0 50 100

B RPmin 200 C
Tj

-30 -40

50

100

C
Tj

200

Data Sheet

13

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

TLE 4945 Operate-and Release-Point versus Junction Temperature

TLE 4945-2 Operate-and Release-Point versus Junction Temperature

mT 20

_V < _ 24 V 3.8 V < S

mT 12

_V < _ 24 V 3.8 V < S

10

B OPmax B RPmax

B OPmax B RPmax B OPtyp B RPtyp B OPmin

B OPtyp B RPtyp B OPmin

-10

B RPmin

-6

B RPmin

-20

-12

-30 -40

50

100

C
Tj

200

-18 -40

50

100

C
Tj

200

Data Sheet

14

2000-07-01

TLE 4905 L; TLE 4935 L; TLE 4935-2 L; TLE 4945 L; TLE 4945-2L

Package Outline P-SSO-3-2 (Plastic Single Small Outline Package)

4.06 +0.13
3 +0.13

1.9max

0.15max

12.7 1

1.52 0.05

0.35x45

0.79 0.2 +0.1

23.8 0.5

0.4 0.05

1
1.27 0.25

3
9 +0.75 -0.5

38 max.

18 0.5

6 0.5

0.25 -0.15

Tape 6.35 0.4 12.7 0.3 4 0.3

Branded Side

Hall-Probe d : Distance chip to upper side of IC P-SSO-3-2 : 0.57 0.08 mm

AEA02510

Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book Package Information. Data Sheet 15

Dimensions in mm 2000-07-01

1 -1

Adhesive Tape