Soft starters Altistart 22

Catalogue October

2009

All technical information about products listed in this catalogue are now available on:

www.schneider-electric.com

Browse the product data sheet to check out : p characteristics, p dimensions, p curves, ... p and also the links to the user guides and the CAD les.

1 From the home page, type the model number* into the
Search box.

* type the model number without any blank, replace p by

2 Under All tab, click the model number that interests you.

3 The product data sheet displays.

Discover this product p Characteritics p Functions p Connection p Dimensions p Download & Documents Other products p Help me to choose Accessories p Plug p Sockets

mm in. 4x7 4x0.28

M6 100 3.9 6,5 0.3 250 9.8 65 2.6 209 8.2 100 3.9 130 5.1
1 3

169 6.6

265 10.4

1 1

Q2

2 2
T1

230V 1 (2)

KM1 2 4 6

Q3

1 2

S1
R2A R2C A1

S2

14

Q1 1 3 5

13

CL1

1/L1

3/L2

5/L3

CL2

A1

(1)
PTC1 PTC2 +24V COM R1C R1A R1B R2B LI1 LI2 LI3

(1)
R2C R2A

2/T1

4/T2

6/T3

S4

W1

U1

V1

S3

M1 3

You can get this information in one single pdf le.

A2

KM1

A1 14

KM1

13

Make the most of your energy!

Altistart 22 soft start/ soft stop unit

Innovative Economical Safe

Reduce your operating costs Simplify wiring Protect your electrical installation Save space with a fully equipped product

Contents Selection guide Presentation References Motor starters p. 6 p. 8 p. 12 p. 16

Reduce your costs with an integrated bypass function*

Installation and operation couldnt be simpler
Save time on wiring (6 terminals instead of 12)  Optimise the size of your enclosures (Altistart 22 is very compact) Keep temperature rises to a minimum (low heat dissipation)  Reduce the number of components you need to manage (multifunction product)

3 controlled phases

50% reduction in wiring time

* shuntage

Bypass the stresses and let your applications take the strain
Protect your installations
 By minimising jolts and shocks, Altistart 22 reduces mechanical stresses on your machines and increases their service life.  Altistart 22 prevents installation failure by detecting and signalling faults such as a blocked motor, underload or incorrect earthing of one of the 3 motor phases.  Cards are coated as standard to provide enhanced resistance to harsh environments.

Play it safe with a complete product

 Altistart 22, with its three controlled phases, incorporates all the protection functions required to monitor the motor, the electrical installation and the starter itself.  Simplify setup and operation with: - 4 light emitting diodes (LEDs) - 4 navigation keys - 4-digit display - SoMove setup software (common to the Altivar, Lexium and TeSys ranges)

Selection guide

Soft starters for asynchronous motors

Applications

Starting simple machines

1 2 3 4 5 6 7 8 9 10
More technical information on www.schneider-electric.com

Power range for 50...60 Hz (kW) line supply (connection to the motors power supply line) Single-phase 110...230 V (kW) Three-phase 200...240 V (kW) Three-phase 200...480 V (kW) Three-phase 208...600 V (kW) Three-phase 208...690 V (kW) Three-phase 230...415 V (kW) Three-phase 230...440 V (kW) Three-phase 380...415 V (kW) Drive Number of controlled phases Type of control Operating cycle 0.37...11 0.37...2.2 0.3711 1

Controlled starting and deceleration of simple machines

0.75...15 0.75...7.5 1.515 2

Functions Bypass Number of I/O

Analogue inputs Logic inputs Analogue outputs Logic outputs Relay outputs Integrated Available as an option

Integrated IEC/EN 60947-4-2 e, UL, CSA, C-Tick and CCC

Communication

Standards and certifications

References

ATS01N1pppp

ATS01N2pppp

Page

Please refer to the Soft starters and variable speed drives catalogue.

Controlled starting and deceleration of simple and complex machines

1 2 3
4400 4400 4355 3 Configurable voltage ramp Standard 3900 3630 3 TCS (Torque Control System) Standard and severe 3900

4 5 6 7

Integrated 1 PTC probe 3 2 ("N/C" / "N/O") Modbus IEC/EN 60947-4-2, EMC class A e, UL, CSA, C-Tick, GOST, CCC

Available as an option 1 PTC probe 4 1 2 3 Modbus Fipio, PROFIBUSDP, DeviceNet, Modbus TCP IEC/EN 60947-4-2, EMC classes A and B e, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO and TCF

ATS22pppp
12

ATS48pppQ

ATS48pppY

8 9 10

Please refer to the Soft starters and variable speed drivescatalogue.

More technical information on www.schneider-electric.com



Presentation

Altistart22 soft start - soft stop units

Presentation

1 2 3 4 5 6 7 8 9 10
References: page 12 Combinations: page 16 The Altistart22 soft start - soft stop unit offer

The Altistart 22 soft start - soft stop unit supports the controlled starting and stopping, via voltage and torque, of three-phase squirrel cage asynchronous motors for power ratings between 4 and 400 kW. It comes ready to use for standard applications with class 10 motor protection. The Altistart 22 soft start - soft stop unit has been designed to satisfy the performance requirements of applications where ruggedness, the safety of personnel and equipment, and easy commissioning are at a premium. The bypass function (based on a bypass contactor) has been made easier to use by integrating it into the starter. This approach suits applications where it may be necessary to bypass the starter at the end of the starting process in order, for example, to limit the starter's heat dissipation. The Altistart 22 soft start - soft stop unit contains an integrated display terminal which allows the user to change both the programming and the adjustment or monitoring parameters in order to adapt and customize the application in line with customer needs. The unit also features thermal protection for motors as well as a monitoring facility for machines and, thanks to the SoMove setup software, enables the installation to be commissioned immediately.

Applications
The integrated functions of the Altistart22 soft start - soft stop unit are compatible with the more common types of application found in the construction, infrastructure or industrial sectors: b Centrifugal pumps, piston pumps b Fans b Screw compressors, etc. b Material handling (conveyors, etc.) b Specialist machines (agitators, mixers, centrifugal machines) The Altistart 22 soft start - soft stop unit represents a truly cost-effective solution, as it supports: b A reduction in installation costs by optimizing product sizes, integrating the bypass function and reducing wiring time b A reduction in the stress associated with electrical distribution by reducing the current peaks and line voltage drops caused by motors starting up b A reduction in running costs for machines by reducing mechanical stress Controlling the three phases of the motor windings ensures that performance remains satisfactory, whatever the situation (with or without a load, all voltage and power ranges, etc.).

Conformity to standards
Type Conducted and radiated emissions Vibration resistance Shock resistance Maximum ambient pollution Relative humidity Degree of protection Conforming to IEC60947-4-2 Conforming to IEC60068-2-6 Conforming to IEC60068-2-27 Conforming to IEC60664-1 Conforming to IEC60068-2-3 For ATS22D17C11 For ATS22C14C59 Performance Class A 1.5mm from 2 to 13 Hz, 1 gn from 13 to 200 Hz 15 gn for 11ms Step2 95% non-condensing, no dripping water IP20 (IP00 if no connections) IP00

The Altistart 22 soft start - soft stop unit conforms to the RoHS Directive.

Presentation (continued)

Altistart22 soft start - soft stop units

The main functions integrated in the drive are as follows: Adjustment functions b Adjustment of the Altistart 22 soft start - soft stop unit's current in line with the motor's nominal current b Limiting current b Selection of the type of stop (freewheel or deceleration) Drive performance functions b Management of the three supply phases b Option of connecting the starter in the motor delta connection in series with each winding. This supports the use of a soft start - soft stop unit with a lower rating (only applies to the ATS22pppQ range) b Management of the ramp and torque supplied to the motor throughout the acceleration and deceleration period (significantly less jerk) b Variety of control profiles to suit different applications b Integrated and automated management of the bypass function at the end of the starting process (based on a bypass contactor), whilst preserving electronic protection features Protection functions for the motor and machine b Integration of configurable motor thermal protection b Thermal protection for the Altistart22 soft start - soft stop unit b Integrated processing of the PTC thermal probe with electrical isolation (optimum management of motor protection) b Monitoring of the duration and number of starts (better installation safety) b Management of stopping time before restart b Automatic restart b Protection against underloads and overcurrents in transient or steady state b Automatic adjustment to the line frequency b Detection of phase sequence b Detection of phase loss b Detection of imbalances between phases and of leakage currents (for the ATS22pppS6 and S6U ranges) Functions to ease integration into control systems b 3 programmable logic inputs b 2 programmable N/C / N/O relay outputs b Pluggable connectors for I/O b Second set of parameters for motor operation b Modbus serial link via RJ45 connector b Display of soft start - soft stop unit and machine states b Display of I/O currents and states b Error log, diagnostics for soft start - soft stop unit b Return to factory settings b 4 LEDs on the front face (Ready, Communication, Run and Trip)

Functions

1 2 3 4 5 6 7 8 9 10

References: page 12

Combinations: page 16

Presentation (continued)

Altistart22 soft start - soft stop units

1 2 3 4 5 6 7 8 9 10
References: page 12 Combinations: page 16

The Altistart 22 soft start - soft stop unit offer comprises 2 voltage ranges for motor power ratings from 4 to 400kW: b Three-phase power supply voltage from 230 V to 440 V, 50/60 Hz (ATS22pppQ) b Three-phase power supply voltage from 208 V to 600 V, 50/60 Hz (ATS22pppS6 and ATS22pppS6U) Options The Altistart22 soft start - soft stop unit range also offers a number of options: b A remote terminal unit can be installed on the front face of a floor-standing enclosure with IP54/NEMA 12 or IP65 protection (depending on the model). It offers the same functions as an integrated display terminal. b Additional fans to support a greater number of starts b SoMove lite setup software b Protection shrouds for terminals to ensure compliance with IP20 degree of protection

The offer

The Altistart22 soft start - soft stop unit has been designed for standard control system applications. In addition to the chosen application, the choice of starter will depend on the following main criteria: b The power and nominal current on the motor rating plate b The load factor for the application The starting capacity also needs to be considered when selecting an Altistart22 soft start - soft stop unit: Starting capacity
Commissioning the ATS22 soft start - soft stop unit with SoMove lite setup software

Selection criteria

The standard starting capacity for a class10 motor is: b 3.5 In for 40 seconds from cold with S1 motor duty b 3.5 In for 20 seconds with S4 motor duty, based on a load factor of 95%
Note: S1 motor duty is based on a start followed by operation at constant load, making it possible to achieve thermal equilibrium. S4 motor duty is based on a cycle consisting of a start, operation at constant load and an idle period.

Number of starts per hour Assuming the starting capacity remains the same, the number of starts per hour can be increased by adding a fan. The ATS22D17QC17Q, ATS22D17S6C17S6 and ATS22D17S6UC17S6U soft start - soft stop units can be fitted with an additional fan. Page15 has details of this option. Possible number of starts per hour based on a capacity of 3.5In for 20seconds (S4 motor duty) after adding a fan:
Soft start - soft stop units ATS22D17pD47p ATS22D62pD88p ATS22C11pC17p Number of starts per hour Without fan 6 6 4 With additional fan 10 10 10

Note: The ATS22C21QC59Q, ATS22C21S6C59S6 and ATS22C21S6UC59S6U soft start soft stop units come with a fan as standard. The standard number of starts per hour for S4 motor duty is 4. Anything more would require the next lowest rating.

10

Presentation (continued)

Altistart22 soft start - soft stop units

Examples of functions performed by the Altistart22 soft start - soft stop unit depending on the application chosen
Type of machine Centrifugal pump Functions performed by the Altistart 22 Controlled slowing-down and stopping (fewer hammer blows) Protection against underload or reversal of phase rotation direction Control of pump priming and the pump's direction of rotation Detection of overloads and underloads (motor/fan transmission broken) Braking torque on stopping Thermal monitoring of motor via electrically isolated PTC probe Control of starting characteristics Management of automatic restart Protection against reversal of phase rotation direction Contact for automatic emptying on stopping Protection against reversal of phase rotation direction Contact for automatic emptying on stopping Monitoring of overloads for incident detection or underloads for break detection Second set of motor parameters depending on the load transported Monitoring of overloads for hard spot detection or underloads for break detection Displaying the current indicates the density of the material. Displaying the current indicates the density of the material. Boost on start-up Torque control on starting and stopping

Standard application areas

1 2 3 4 5 6 7 8 9 10

Piston pump Fan

Turbine Refrigeration compressor Screw compressor Centrifugal compressor Conveyor Example of pumping application using the Altistart22 soft start - soft stop unit Conveyor belt Lifting screw Agitator Mixer Refiner

The ATS22 soft start - soft stop unit can be used for applications outside the standard characteristics, but this could involve derating to at least the next lowest level. Examples of applications outside the standard characteristics: b Greater number of starts b Motor thermal protection higher than class 10 b Excess current required at time of start b Certain ambient temperatures: For ambient temperatures between +40C and +60C, derate the nominal current of the Altistart by 2.2% for each additional degree. b Certain altitudes: For altitudes between 1000 and 2000 metres, derate the nominal current of the Altistart by 2% for each additional 100 metres. b Etc.

Dedicated applications

References: page 12

Combinations: page 16

11

References

Altistart 22 soft start - soft stop units

Three-phase power supply voltage 230440 V

ATS22D17Q

Motor power given in kW in accordance with standard IEC/EN 60947-4-2. 220V control power supply Motor 230440 V - 50/60 Hz soft start - soft stop unit Power indicated Nominal Factory Dissipated Dimensions Reference Weight on rating plate current setting for power at (W x D x H) (In) current nominal (1) (IcL) current (1) (2) (4) 230 V 400 V 440V kg kW kW kW A A W mm
4 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 7.5 15 22 30 37 45 55 75 90 110 132 160 220 250 315 7.5 15 22 30 37 45 55 75 90 110 132 160 220 250 355 14.8 28.5 42 57 69 81 100 131 162 195 233 285 388 437 560 17 32 47 62 75 88 110 140 170 210 250 320 410 480 590 39 44 48 59 63 66 73 82 91 117 129 150 177 218 251 130 x 169 x 265 130 x 169 x 265 130 x 169 x 265 145 x 207 x 295 145 x 207 x 295 145 x 207 x 295 150 x 229 x 356 150 x 229 x 356 150 x 229 x 356 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 304 x 340 x 455 304 x 340 x 455 ATS22D17Q ATS22D32Q ATS22D47Q ATS22D62Q ATS22D75Q ATS22D88Q ATS22C11Q ATS22C14Q ATS22C17Q ATS22C21Q ATS22C25Q ATS22C32Q ATS22C41Q ATS22C48Q ATS22C59Q 7.000 7.000 7.000 12.000 12.000 12.000 18.000 18.000 18.000 33.000 33.000 33.000 33.000 50.000 50.000

Connection to the motor's power supply line

ATS22D62Q

5.5 11 18.5 22 30 37 45 55 75 90 110 132 160 220 250

Motor power given in kW in accordance with the standard IEC/EN 60947-4-2. 220V control power supply Motor 230440 V - 50/60 Hz soft start - soft stop unit Power indicated on Nominal Factory Dissipated Dimensions Reference Weight rating plate current setting for power at (W x D x H) (In) current nominal (1) (IcL) current (1) (3) (4) 230 V 400 V 440 V kg kW kW kW A A W mm
11 22 45 55 55 75 90 110 132 160 220 250 315 355 400 15 22 45 55 75 75 90 110 132 160 220 250 355 400 500 25 48 70 93 112 132 165 210 255 315 375 480 615 720 885 17 32 47 62 75 88 110 140 170 210 250 320 410 480 590 39 44 48 59 63 66 73 82 91 117 129 150 177 218 251 130 x 169 x 265 130 x 169 x 265 130 x 169 x 265 145 x 207 x 295 145 x 207 x 295 145 x 207 x 295 150 x 229 x 356 150 x 229 x 356 150 x 229 x 356 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 304 x 340 x 455 304 x 340 x 455 ATS22D17Q ATS22D32Q ATS22D47Q ATS22D62Q ATS22D75Q ATS22D88Q ATS22C11Q ATS22C14Q ATS22C17Q ATS22C21Q ATS22C25Q ATS22C32Q ATS22C41Q ATS22C48Q ATS22C59Q

Connection to the motor's delta connection

7.000 7.000 7.000 12.000 12.000 12.000 18.000 18.000 18.000 33.000 33.000 33.000 33.000 50.000 50.000

ATS22C11Q

(1) In refers to the maximum continuous current for class 10. IcL refers to the starter rating. (2) The factory setting for the current equates to the nominal current of a standard 4-pole, 400 V, class 10 motor (standard application). It should be adjusted in line with the current indicated on the motor rating plate. (3) The factory setting for the current should be adjusted in line with the current indicated on the motor rating plate. (4) Includes the power dissipated by the fan

Presentation: page 8

Combinations: page 16

12

References (continued)

Altistart22 soft start - soft stop units

Three-phase power supply voltage 208600 V

Motor power given in kW in accordance with standard IEC/EN 60947-4-2. 220 V control power supply Motor 230600 V - 50/60 Hz soft start - soft stop unit Power Nominal Factory Dissipated Dimensions Reference Weight indicated on rating plate current setting for power at (W x D x H) (In) current nominal (1) (IcL) current (1) (2) (3) 230 V 400 V 440 V 500 V kW
4 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160

Connection to the motor's power supply line

kW
7.5 15 22 30 37 45 55 75 90 110 132 160 220 250 315

kW
7.5 15 22 30 37 45 55 75 90 110 132 160 220 250 355

kW
9 18.5 30 37 45 55 75 90 110 132 160 220 250 315 400

A
14 27 40 52 65 77 96 124 156 180 240 302 361 414 477

A
17 32 47 62 75 88 110 140 170 210 250 320 410 480 590

W
39 44 48 59 63 66 73 82 91 117 129 150 177 218 251

mm
130 x 169 x 265 130 x 169 x 265 130 x 169 x 265 145 x 207 x 295 145 x 207 x 295 145 x 207 x 295 150 x 229 x 356 150 x 229 x 356 150 x 229 x 356 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 304 x 340 x 455 304 x 340 x 455 ATS22D17S6 ATS22D32S6 ATS22D47S6 ATS22D62S6 ATS22D75S6 ATS22D88S6 ATS22C11S6 ATS22C14S6 ATS22C17S6 ATS22C21S6 ATS22C25S6 ATS22C32S6 ATS22C41S6 ATS22C48S6 ATS22C59S6

kg
7.000 7.000 7.000 12.000 12.000 12.000 18.000 18.000 18.000 33.000 33.000 33.000 33.000 50.000 50.000

ATS22C21S6

Motor power given in HP. 110 V control power supply Motor 208600 V - 50/60 Hz soft start - soft stop unit Power Nominal Factory Dissipated Dimensions indicated on rating plate current setting for power at (W x D x H) (In) current nominal (1) (IcL) current (1) (2) (3) 208 V 230 V 460 V 575 V HP
3 7.5 15 20 25 30 ATS22C48S6U 40 50 60 75 100 125 150

Reference

Weight

HP
5 10 15 20 25 30 40 50 60 75 100 125 150 200

HP
10 20 30 40 50 60 75 100 125 150 200 250 300 350 400

HP
15 25 40 50 60 75 100 125 150 200 250 300 350 400 500

A
14 27 40 52 65 77 96 124 156 180 240 302 361 414 477

A
17 32 47 62 75 88 110 140 170 210 250 320 410 480 590

W
39 44 48 59 63 66 73 82 91 117 129 150 177 218 251

mm
130 x 169 x 265 130 x 169 x 265 130 x 169 x 265 145 x 207 x 295 145 x 207 x 295 145 x 207 x 295 150 x 229 x 356 150 x 229 x 356 150 x 229 x 356 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 206 x 299 x 425 304 x 340 x 455 304 x 340 x 455 ATS22D17S6U ATS22D32S6U ATS22D47S6U ATS22D62S6U ATS22D75S6U ATS22D88S6U ATS22C11S6U ATS22C14S6U ATS22C17S6U ATS22C21S6U ATS22C25S6U ATS22C32S6U ATS22C41S6U ATS22C48S6U ATS22C59S6U

kg
7.000 7.000 7.000 12.000 12.000 12.000 18.000 18.000 18.000 33.000 33.000 33.000 33.000 50.000 50.000

(1) In refers to the maximum continuous current for class 10. IcL refers to the starter rating. (2) The factory setting for the current should be adjusted in line with the current indicated on the motor rating plate. (3) Includes the power dissipated by the fan

Presentation: page 8

Combinations: page 16

13

References (continued)

Altistart 22 soft start - soft stop units

Options: Dialogue and configuration tools, Modbus serial link

SoMove setup software
Presentation This software enables the user to configure, set, debug and organize maintenance tasks for the Altistart 22 soft start - soft stop unit. It can also be used to customize the integrated display terminal menus. It can be downloaded from our website, www.schneider-electric.com.
SoMove setup software

References
Description SoMove lite setup software USB/RJ45 cordset equipped with a USB connector and an RJ45 connector. For connecting a PC to the Altistart 22 soft start soft stop unit. Length: 2.5 m For soft start soft stop units ATS22 ATS22 Reference TCSMCNAM3M002P Weight kg 0.115

Presentation This terminal enables the human machine interface of the Altistart22 soft start - soft stop unit to be positioned remotely on the door of a floor-standing enclosure. It has IP54/NEMA12 or IP65 degree of protection depending on the model. It is used to: b Set and configure the soft start - soft stop unit remotely b Display the status and faults of the soft start - soft stop unit remotely Its maximum operating temperature is 50C. Please refer to our website at "www.schneider-electric.com" if the temperature exceeds this. Description 1 4-digit display 2 Selection/validation key ENT: opens a menu or validates the value chosen 3 Navigation keys , 4 Selection key ESC: used to exit a menu References
Description Degree of protection IP54/NEMA 12 IP65 Length m Dimensions WxDxH mm 50 x 15 x 70 66 x 19 x 106 Reference Weight kg 0.250 0.275

Remote display terminal

1 4 2 3

VW3G22101

Remote display terminals A remote-mounting cordset is also required VW3A1104Rpp Remote-mounting cordsets equipped with 2 RJ45 connectors

VW3G22101 VW3G22102

1 3

VW3A1104R10 VW3A1104R30

0.050 0.150

Modbus serial link

Modbus serial link (1) Programmable controller Description

Connection via splitter box and RJ45 connectors

Modbus splitter box 1 2

Number

3 4 with 10 RJ45 connectors

Cordsets for Modbus serial link with 2 RJ45 connectors

Length m 0.3 1 3 0.3 1

Unit reference LU9 GC3 VW3A8306R03 VW3A8306R10 VW3A8306R30 VW3A8306TF03 VW3A8306TF10 VW3A8306RC VW3A8306R

Weight kg 0.500 0.025 0.060 0.130 0.190 0.210 0.010 0.010

4 2

Modbus T-junction boxes (with integrated cable) Line terminators (2) (3) R = 120 W C = 1nf R = 120 W (1) Cable depends on the type of controller or PLC (2) Sold in lots of 2 (3) Depends on the bus architecture

3 4 4

ATS 22

Example of a connection using a Modbus serial link via a splitter box with RJ45 connectors

Presentation: page 8

Combinations: page 16

14

References (continued)

Altistart 22 soft start - soft stop units

Options: Fans, accessories and documentation

Presentation The ATS22C21QC59Q, ATS22C21S6C59S6 and ATS22C21S6UC59S6U soft start - soft stop units come with an integrated fan. The ATS22D17QC17Q, ATS22D17S6C17QS6 and ATS22D17S6UC17S6U soft start - soft stop units are ventilated by means of natural convection. For more demanding applications, such as those with a greater number of starts, the Altistart22 range offers fans as an option. These are driven by the soft start - soft stop unit and attached to the back of the device. The fan's noise level is less than 60 dBA. References
Description VW3G2240p Fans Power supply voltage for control V 220 For soft start soft stop units ATS22D17QD47Q, ATS22D17S6D47S6 ATS22D62QD88Q, ATS22D62S6D88S6 ATS22C11QC17Q, ATS22C11S6C17S6 ATS22D17S6UD47S6U ATS22D62S6UD88S6U ATS22C11S6UC17S6U Dimensions WxDxH mm 130 x 40 x 265 145 x 40 x 295 150 x 40 x 350 130 x 40 x 265 145 x 40 x 295 150 x 40 x 350 Reference Weight kg 1.200 1.400 1.600 1.200 1.400 1.600

Fans

VW3G22400 VW3G22401 VW3G22402 VW3G22U400 VW3G22U401 VW3G22U402

110

Protection shrouds for power terminals (to be used with eyelet connections) The ATS22C11QC59Q, ATS22C11S6C59S6 and ATS22C11S6UC59S6U soft start - soft stop units have 6 unprotected power terminals. These terminals can be fitted with protection shrouds.
Description LA9F70p Set of 6 power terminal protection shrouds For soft start soft stop units ATS22C11QC17Q, ATS22C11S6C17S6, ATS22C11S6UC17S6U ATS22C21QC59Q, ATS22C21S6C59S6, ATS22C21S6UC59S6U Reference LA9F702 LA9F703 Weight kg 0.250 0.250

Documentation
Description Description of the Motion & Drives Offer DVDROM (1) It consists of: b Technical documentation (programming manuals, installation manuals, quick reference guides) b SoMove lite setup software b Brochures, catalogues. The documentation relating to the ATS22 offer is also available on our website, www.schneider-electric.com. (1) Updated version including the Altistart 22 range available 1st quarter 2010.

Reference VW3A8200

Weight kg 0.100

Presentation: page 8

Combinations: page 16

15

Combinations

Altistart22 soft start - soft stop units

Type 1 coordination

Motor starters: 400440 Vthree-phase power supply voltage

Q1: GVp/ NSppp Q1: GS2ppp

Compatible components in accordance with standard IEC/EN60947-4-2

Use the contactor and starter with either a circuit breaker or a fuse switch disconnector.
Three-phase, 4-pole motor 50/60 Hz 400 V 440 V kW A kW M1 7.5 15 M1 7.5 15 22 30 37 45 55 75 90 110 132 A1 14.8 ATS22D17p 28.5 ATS22D32p 42 57 69 81 ATS22D47p ATS22D62p ATS22D75p ATS22D88p Class 10 starter (1) Circuit breaker Reference Contactor (3) Fuse switch disconnector (for front and side control) Rating aM fuse Unit reference (4) F1 DF2CA16 DF2CA32 DF2EA50 DF2FA63 DF2FA80 Size mm 10 x 38 10 x 38 14 x 51 22 x 58 22 x 58 Rating A 16 32 50 63 80 100 125 160 200 250

1 2 3 4 5 6 7 8 9 10

6 F1 : DF2pA

3 5

3 5

A Q1 GV3 L20 NS80H6-MA GV3 L32 NS80H6-MA GV3 L50 NS80H6-MA GV3L65 NS80H6-MA NS80H6-MA 25 50 50 80 80 KM1 LC1D18pp LC1D32pp LC1D50App LC1D65App LC1D80pp LC1D115pp LC1D115pp LC1D150pp LC1F185pp LC1F225pp GS1DD3 GS1DD3 GS2F3 GS2J3 GS2J3 GS2J3 GS2K3 GS2L3 GS2N3 GS2N3

3 5 W/T3 T/L3 4 6

KM1: TeSys LC1 p

U/T1 R/L1 V/T2 S/L2

A1: ATS22p

22 30

W1 M1: threephase asynchronous motor

U1

V1

M1 3

37 45 55 75 90 110 132

Motor starter with protection by circuit breaker or switch disconnector

NSX100pMA 100 (2) NSX160pMA 150 (2) NSX160pMA 150 (2) NSX250pMA 220 (2) NSX250pMA 220 (2)

DF2FA100 22 x 58 DF2FA125 22 x 58 DF2GA1161 0 DF2HA1201 1 DF2HA1251 1

100 ATS22C11p 131 ATS22C14p 162 ATS22C17p 195 ATS22C21p 233 ATS22C25p

NSX400p 320 LC1F265pp GS2N3 DF2HA1251 1 250 Micrologic 1.3-M (2) NSX400p 320 LC1F330pp GS2QQ3 DF2JA1311 2 315 160 160 285 ATS22C32p Micrologic 1.3-M (2) NSX630p 500 LC1F400pp GS2S3 DF2KA1401 3 400 220 220 388 ATS22C41p Micrologic 1.3-M (2) NSX630p 500 LC1 F500pp GS2S3 DF2KA1501 3 500 250 250 437 ATS22C48p Micrologic 1.3-M(2) NS630bp 500 LC1 F630pp GS2S3 DF2KA1631 3 630 315 355 560 ATS22C59p Micrologic 5.0 (2) (1) Replace p with Q or S6 depending on the starter's voltage range. To find more information on combinations for motor power supply voltages of 230 V (ATS22pppQ starters) or 500 V (ATS22pppS6 starters), please visit our website at www.schneider-electric.com. (2) Replace p with F, N, H, S or L depending on the breaking capacity; see table below. (3) Replace pp with the control circuit voltage reference: please consult our Motor starter solutions. Control and protection components catalogue. (4) DF2 CA, EA, FA: sold in lots of 10. DF2 GA, HA, JA, KA: sold in lots of 3. Maximum prospective short-circuit current of the starter according to standard IEC/EN60947-4-2 Starter ATS22D17p ATS22D75p ATS22D88p ATS22C59p Iq (kA) in 500V 25 50

Breaking capacity of circuit-breakers according to standard IEC/EN60947-4-2 Circuit-breaker GV3L NS80H6-MA Circuit-breaker Icu (kA) in 400V 50 70 Icu (kA) in 400V F NSX100NSX630 NS630b Presentation: page 8 References: page 12 36 N 50 50 H 70 70 S 100 L 150 150 Icu (kA) in 440V 50 65 Icu (kA) in 440V F 35 N 50 50 H 65 65 S 90 L 130 130

16

Combinations (continued)

Altistart22 soft start - soft stop units

Motor starters: 208575 V three-phase power supply voltage

Compatible components in accordance with standard UL508
F1 : AJTppp 2 4 6 1 3 5

Product without enclosure

Three-phase, 4-pole motor 50/60 Hz 208V HP M1 3 7.5 15 20 230V HP M1 5 10 15 20 25 30 40 50 60 75 100 125 150 200 460 V HP M1 10 20 30 40 50 60 75 100 125 150 200 250 300 350 400

Class 10 starter 575 V HP A M1 15 25 40 50 60 75 100 125 150 200 250 300 350 400 500 14 27 40 52 65 77 96 124 156 180 240 302 361 414 477

KM1 : TeSys LC1p 2 4 6

Maximum Contactor (1) short-circuit current (SCC) at 600 V kA

Time delay fuse (sold by Ferraz) Class J

1 2 3 4 5 6 7 8 9 10

3 5

W/T3 T/L3

U/T1 R/L1 V/T2 S/L2

A1 : ATS22p

A1 ATS22D17S6U 5 ATS22D32S6U 5 ATS22D47S6U 5 ATS22D62S6U 10 ATS22D75S6U 10 ATS22D88S6U 10 ATS22C11S6U 10 ATS22C14S6U 10 ATS22C17S6U 10 ATS22C21S6U 18 ATS22C25S6U 18 ATS22C32S6U 18 ATS22C41S6U 18 ATS22C48S6U 18 ATS22C59S6U 30

KM1 LC1 D18pp LC1D32pp LC1D50App LC1D65App LC1D80App LC1D115pp LC1D115pp LC1D150pp LC1F185pp LC1F225pp LC1F265pp LC1F330pp LC1F400pp LC1F500pp LC1F630pp

F1 AJT40 AJT70 AJT100 AJT125 AJT175 AJT200 AJT250 AJT300 AJT400 AJT500 AJT600 2 x AJT350 2 x AJT400 2 x AJT500 2 x AJT600

W1 M1: threephase asynchronous motor

U1

V1

M1 3

25 30 40 50 60 75 100 125 150

Motor starter with protection by fuse

Enclosed product
Three-phase, 4-pole motor 50/60 Hz 208V 230 V 460 V 575 V A HP HP HP HP M1 M1 M1 M1 3 7.5 15 20 25 30 40 50 60 75 100 125 150 5 10 15 20 25 30 40 50 60 75 100 125 150 200 10 20 30 40 50 60 75 100 125 150 200 250 300 350 400 15 25 40 50 60 75 100 125 150 200 250 300 350 400 500 14 27 40 52 65 77 96 124 156 180 240 302 361 414 477 Class10 starter Maximum short-circuit current (SCC) at 600V kA A1 ATS22D17S6U 100 ATS22D32S6U 100 ATS22D47S6U 100 ATS22D62S6U 100 ATS22D75S6U 100 ATS22D88S6U 100 ATS22C11S6U 100 ATS22C14S6U 100 ATS22C17S6U 100 ATS22C21S6U 100 ATS22C25S6U 100 ATS22C32S6U 100 ATS22C41S6U 100 ATS22C48S6U 100 ATS22C59S6U 100 40 40 40 52 52 52 125 125 125 130 130 130 130 195 195 2406 2406 2406 3149 3149 3149 7630 7630 7630 7892 7892 7892 7892 Contactor (1) Time delay fuse Minimum wall-mounted enclosure volume cm3 inch3 KM1 LC1D18pp LC1D32pp LC1D50App LC1D65App LC1D80App LC1D115pp LC1D115pp LC1F150pp LC1F185pp LC1F225pp LC1F265pp LC1F330pp LC1F400pp Class J A F1 30 60 90 110 150 175 200 250 300 400 450 600 600 800 800 Class L A

11,869 LC1F500pp 11,869 LC1F630pp

(1) Replace pp with the control circuit reference: please consult our Motor starter solutions. Control and protection components catalogue.

Presentation: page 8

References: page 12

17

Schneider Electric Industries SAS

Head Of ce 35, rue Joseph Monier F-92500 Rueil-Malmaison France

www.schneider-electric.com
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for speci c user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant speci c application or use thereof. Neither Schneider Electric nor any of its af liates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Design: Schneider Electric Photos: Schneider Electric Printed by:

ART. 960386

October 2009

DIA2ED2090804EN