Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

CLI - Safety Diploma

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

PROSPECTUS

ADVANCED DIPLOMA IN INDUSTRIAL SAFETY


(2005-2006)
CENTRAL LABOUR INSTITUTE
GOVERNMENT OF INDIA
MINISTRY OF LABOUR
(DIRECTORATE GENERAL FACTORY ADVICE SERVICE AND LABOUR INSTITUTES)

N.S. MANKIKAR MARG


SION, MUMBAI – 400 022

Tel.: (022) 2409 2203


Fax: (022) 2407 1986
E-mail : cli@dgfasli.nic.in
Website : www.dgfasli.nic.in

1. INTRODUCTION

Accident prevention reduces losses and improves productivity. Ensuring Safety and Health
of industrial worker is the responsibility of the management. The services of qualified
safety officers are necessary to assist the management in planning, implementing and
monitoring accident prevention programmes.

Section 40-B of the Factories Act, 1948, Regulation 93 of the Dock Workers (Safety,
Health and Welfare) Regulation, 1990, and Section 38 of the Building and Other
Construction Workers (Regulation of Employment and Condition of Service) Act, 1996
prescribe the appointment of Safety Officers. The task of the Safety Officer is to advise
and assist the management in the fulfillment of the obligations concerning prevention of
occupational diseases & accident, and maintenance of safe working environment. A
person should essentially possess a Diploma in Industrial Safety recognized by the
government for recruitment as a safety officer in addition to other prescribed qualification
and experience.

2. COURSE

The Central Labour Institute, Mumbai conducts Advanced Diploma in Industrial Safety
course for one year (full time) for 60 students. The medium of instruction is English. The
course provides comprehensive education and training on Industrial Occupational Health,
Safety and Environment. It covers the following seven compulsory and one elective
subject. The course is affiliated to Maharashtra State Board of Technical Education,
Mumbai.
Compulsory Subjects:

1. Safety Health and Environment Management.


2. Safety in Engineering – I
3. Safety in Engineering – II
4. Quality Control in Occupational Safety, Health and Environment
5. Safety, Health and Environment Legislation
6. Industrial Hygiene & Occupational Health
7. Safety in Chemical Industry.

Elective Subject: Safety in Engineering Industry or Advanced Safety Management and


Engineering Techniques or Safety in Textile industry or Safety in Construction Industry or
Safety in Docks or Environmental Management or Applied Ergonomics.

The course is presented through lectures, case studies laboratory work, exercise, films
and study visits. Every student is required to carry out a project work and term work during
the course.

3. DURATION

One year in the following three terms:

I Term – Teaching at the Institute – July to October.


II Term - Project work in the industry – November & December.
III Term - Teaching at the Institute– January to
March

4. FACULTY

Specialists from institute and experts from reputed institutions, organizations and
industries.

5. ADMISSION

The essential qualification and experience are:

a) A recognized degree in any branch of engineering or technology and relevant practical


experience in a supervisory capacity for a period of not less than TWO years; OR
b) A recognized diploma in any branch of engineering or technology and relevant practical
experience in a supervisory capacity for a period of not less than FIVE years. OR
c) A recognized degree in Science with Physics or Chemistry and relevant practical
experience in a supervisory capacity for a period of not less than FIVE years.

The experience should be in any one of the following:

i) Manufacturing, quality assurance, maintenance or safety in Industry; OR


ii) Building or other construction works or department of a port or dock; OR
iii) Research, training or education in the field of industrial safety or environment. OR
iv) Government department in administration of safety legislation.
NOTE: Sponsored candidates or candidate with higher qualification and
experience will be given preference.
6. APPLICATION

Prescribed application form(s) along with the course prospectus may be obtained by down
loading from DGFASLI website www.dgfasli.nic.in The filled in application form(s) along
with attested copies of certificates and mark-sheets and two self-addressed envelop (size
11.5 cm x 24 cm with Rs.6/- stamp each should reach the Director-in-Charge, Safety
Division, Central Labour Institute, Sion, Mumbai – 400 022 on or before the last date.
Envelope containing the application form should be superscribed “APPLICATION FOR
ADVANCED DIPLOMA IN INDUSTRIAL SAFETY”. The last date of receipt of filled in
application form at this Institute is 13th June, 2005.

7. SELECTION

The candidates from the States/UTs of Maharashtra, Gujarat, Goa, Dadra & Nagar Haveli
and Daman, Diu are eligible for admission to the course at the Central Labour Institute,
Mumbai.

After preliminary screening of the applications, eligible candidates will be short-listed and
called for interview before a Selection Committee in Mumbai in the month of June, 2005.

Calling for interview does not guarantee the selection. The decision of the Selection
Committee shall be final and no correspondence will be entertained by the Institute, in this
regard.

No traveling allowance will be paid by the Institute for attending the interview.

8. EXAMINATION

The examination is conducted by the Maharashtra State Board of Technical Education,


Mumbai. The successful candidates are awarded the Diploma by the Board.
9. CHARGES

i) Fees : Institute fees (Tuition Fee) @ Rs.5000/- (Rupees five thousand only) per
student for the entire course is to be paid by a crossed demand draft drawn in favour of
“Central Labour Institute, Mumbai. The fee once paid is neither refundable nor
transferable.

ii) Library Caution Money : Deposit of Rs.1000/- (Rupees one thousand only) in cash
(refundable).

iii) Hostel Rent : Rs.20/- (Rupees twenty only) per head per day to be paid in cash for a
period of one teaching term in advance.

iv) Enrolment & Examination Fee : To be paid to Maharashtra State Board of Technical
Examinations, as and when required by the Board.

10. ACCOMMODATION

Limited non-family accommodation will be made available only to the outstation candidates
in the CLI Hostel.
11. COMMENCEMENT

The course at CLI, Mumbai will commence w.e.f. 25th July, 2005.
Photo
Passport
Size

CENTRAL LABOUR INSTITUTE


(DIRECTORATE GENERAL FACTORY ADVICE SERVICE AND LABOUR INSTITUTES)
GOVERNMENT OF INDIA, MINISTRY OF LABOUR
N.S. MANKIKAR MARG, SION, MUMBAI – 400 022

Tel: (022) 24092203 E-mail : cli@dgfasli.nic.in


Fax: (022) 24071986 Website : www.dgfasli.nic.in

Application For Admission To ADVANCED DIPLOMA IN INDUSTRIAL SAFETY


(2005-2006)

INSTRUCTION TO CANDIDATES
• Please furnish all information in full.
• Attach separate sheets wherever the space in the form is inadequate.
• Attach attested copies of testimonials in respect of age, qualification, experience, caste, etc.
including mark-sheet for qualifying examinations.
• Last date for receipt of application : 13-06-2005
• The course will commence w.e.f. 25-07-2005 at CLI, Mumbai.

1 Full Name Surname Name Middle Name


(in block letters)

2 Father’s Name

3 Date of Birth

4 Residential Address

Pin Code: Tel: Fax:


5 Present Address

Pin Code: Tel: Fax:


6 Are you a member of
SC / ST / OBC / VJ /NT Yes / No

(Please attach attested copies of certificates from Competent Authority)


1
(Contd…..)
2
7. Details of Academic Qualifications (S.S.C. onward in chronological order)

Year Examination Name and Address Subject Marks Percent- Class/ No. of
Passed of Board/ obtained / age Division Attempts
University out of
1 2 3 4 5 6 7 8

8. (a) Details of Experience (in chronological Order):

Name and Address of the Period Designation Nature of Duties


Organisation
From To

(Please attach experience certificate)


8. (b) Total Experience (As on 01-06-2005) : Years____________ Months _________

(Contd…)
3
9. Details of the Papers published, if any:

10. Extra curricular activities, if any:

11. Any other information the applicant desires to give in support of the application:

12. Hostel accommodation : Required / Not Required

13. Are you Sponsored? (If sponsored, please provide the : Yes / No
certificate given on page No.4 (Annex-A) on Company’s
Letter Head)

I hereby declare that the information furnished in the application is true and correct to the best of my
knowledge and belief and that no information has been suppressed by me. I also understand that I will be
disqualified in the event of any information being found incorrect.

Place:
----------------------------------------------------
Date : (Signature of the Candidate)

(Contd…..)
4
CERTIFICATE BY SPONSORING AUTHORITY

1. We hereby sponsor Shri _________________________________________ for the Advanced


Diploma in Industrial Safety Course-2005-2006.

2. Shri ______________________________________ joined this organization on ________________


as ___________________________________________ and at present he is working as
_______________________________________________ from ____________ to _____________ .

3. On his selection, he will be fully relieved to attend classes, do the project work and also appear in the
examination.

Place :
__________ ___________________________
Date : Stamp Signature of Sponsoring Authority

(FOR OFFICE USE ONLY)

APPLICATION NO.: Date: / / 2005

1 Sponsored Yes No
2 Is sponsorer’s certificate attached? Yes No
3 a) Government (Central/State) Yes No
b) Government of India Undertaking Yes No
c) Private Yes No
4 Qualification (ME/BE/Dip. In Engg./Ph.D./M.Sc./B.Sc.)
5 Application Rejected Yes No
Reason : Incomplete / Not Qualified / Less Experience
6 Called for interview : Date: (FN / AN)
7 Selected Yes No
8 Hostel Accommodation given Yes No

9. Selection Committee Remarks: Date:


Chairman Member Member Member Member Member

You might also like