Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Eurocard DIN Components: C-Series Stepper Motor Driver With Power Supply

    Uploaded by

    awemetal
    This document describes a C-Series stepper motor driver with a built-in power supply that runs directly from 110V/60Hz AC lines. It has screw terminal connectors for input signals and power on the rear panel, and a 9-pin D connector on the front panel for motor output signals. The driver provides thermal and short circuit protection, and is suitable for 4, 6 or 8 lead stepper motors running at voltages between 24-36V DC with a maximum output current of 2A.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Eurocard DIN Components: C-Series Stepper Motor Driver With Power Supply

    Uploaded by

    awemetal
    4 views1 page
    This document describes a C-Series stepper motor driver with a built-in power supply that runs directly from 110V/60Hz AC lines. It has screw terminal connectors for input signals and power on the rear panel, and a 9-pin D connector on the front panel for motor output signals. The driver provides thermal and short circuit protection, and is suitable for 4, 6 or 8 lead stepper motors running at voltages between 24-36V DC with a maximum output current of 2A.

    Original Title

    H834P147

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a C-Series stepper motor driver with a built-in power supply that runs directly from 110V/60Hz AC lines. It has screw terminal connectors for input signals and power on the rear panel, and a 9-pin D connector on the front panel for motor output signals. The driver provides thermal and short circuit protection, and is suitable for 4, 6 or 8 lead stepper motors running at voltages between 24-36V DC with a maximum output current of 2A.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views1 page

    Eurocard DIN Components: C-Series Stepper Motor Driver With Power Supply

    Uploaded by

    awemetal
    This document describes a C-Series stepper motor driver with a built-in power supply that runs directly from 110V/60Hz AC lines. It has screw terminal connectors for input signals and power on the rear panel, and a 9-pin D connector on the front panel for motor output signals. The driver provides thermal and short circuit protection, and is suitable for 4, 6 or 8 lead stepper motors running at voltages between 24-36V DC with a maximum output current of 2A.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Techno Linear Motion Catalog 147

    E
    L
    E
    C
    T
    R
    O
    N
    I
    C
    S
    3
    C-Series Stepper Motor Driver
    with Power Supply
    Eurocard DIN Components
    FEATURES
    Built-in power supply runs directly from
    110V / 60 Hz AC lines
    Input signals & power are supplied through
    screw terminal connectors on the rear panel
    Thermal & short circuit protection
    Motor output signals are supplied through a
    9-pin D connector on the front panel
    4, 6 or 8 lead (5 lead not suitable)
    +5V DC
    0C to 35C
    70C
    110V / 60 Hz
    2A
    24 - 36V
    Enclosure
    110 mm x 165 mm x 56 mm
    8 kHz (full step), 10 kHz (half step)
    Nominal Output Current
    Motor Supply Voltage
    Mechanical Format
    Maximum Stepping Rates
    Suitable Motor Types
    Input Logic Level
    Operating Temperature Range
    Maximum Heat Sink Temperature
    Input Voltage
    Dimensions
    Catalog Number
    SPECIFICATIONS
    HL1100M313122
    Product Finder Home Page

    You might also like