Hydro-Flo Technologies is a company that provides wastewater treatment solutions. The document provides information on hydraulic loading ratios and plate spacing for wastewater treatment systems. It notes that the hydraulic loading ratio is typically set between 0.25 to 0.5 depending on settleable material properties, and can be determined by field tests or calculations. Plate spacing is recommended at 2 inches but can be adjusted based on the quantity of total suspended solids present, and should not be less than 2 inches without considering settling rates and hindered settling.
Hydro-Flo Technologies is a company that provides wastewater treatment solutions. The document provides information on hydraulic loading ratios and plate spacing for wastewater treatment systems. It notes that the hydraulic loading ratio is typically set between 0.25 to 0.5 depending on settleable material properties, and can be determined by field tests or calculations. Plate spacing is recommended at 2 inches but can be adjusted based on the quantity of total suspended solids present, and should not be less than 2 inches without considering settling rates and hindered settling.
Hydro-Flo Technologies is a company that provides wastewater treatment solutions. The document provides information on hydraulic loading ratios and plate spacing for wastewater treatment systems. It notes that the hydraulic loading ratio is typically set between 0.25 to 0.5 depending on settleable material properties, and can be determined by field tests or calculations. Plate spacing is recommended at 2 inches but can be adjusted based on the quantity of total suspended solids present, and should not be less than 2 inches without considering settling rates and hindered settling.
Hydro-Flo Technologies is a company that provides wastewater treatment solutions. The document provides information on hydraulic loading ratios and plate spacing for wastewater treatment systems. It notes that the hydraulic loading ratio is typically set between 0.25 to 0.5 depending on settleable material properties, and can be determined by field tests or calculations. Plate spacing is recommended at 2 inches but can be adjusted based on the quantity of total suspended solids present, and should not be less than 2 inches without considering settling rates and hindered settling.
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 1
Hydro-Flo Technologies, Inc.
The Art and Science... of Wastewater Treatment
Company Location For more detailed information go to www.HydroFloTech.com Input 100.00 0.33 2.00
What is the Process Flow Rate
What is the Desired Hydraulic Loading Ratio What is the Desired Plate Spacing
NOTE: The hydraulic loading ratio is typically
set from .25 to .5 The lower the settling rate or specific gravity (of the settleable material) the lower the hydraulic loading ratio. Hydraulic loading ratios can be determined by field tests or calculated based on the specific gravity of the chemically treated solids.
NOTE: Plate spacing can be set to any number desired. The
recommended plate spacing is typically 2" but higher (and lower, down to as little as 1") can be specified if required by your application. Plate spacing is usually determined by the quantity of TSS present. Be cautious when specifying plate spacing less than 2". TSS and hindered settling rates must be taken into consideration.
Call 630-762-0380 to talk to a Hydro-Flo application engineer
1 2 1 2 1 2 1 2
ST OR PB ST OR PB ST OR PB ST OR PB ST OR PB ST OR PB ST OR PB ST OR PB
