Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Base 2 - CHS139.7x5thk: 8 Installation Data

    Uploaded by

    Collin Ngu
    This document provides installation instructions for anchoring a steel plate to concrete. It specifies using 6 HIT-RE 500 + HAS(-E)R M12 anchors with a hole diameter of 14mm and depth of 110mm in the concrete. The steel plate is 140x140x25mm and requires a minimum base material thickness of 140mm. Recommended tools include a diamond core rig for drilling, compressed air and wire brush for cleaning, and a dispenser, dynamic set tool, and torque wrench for setting the anchors. Coordinates for the 6 anchor locations are provided on the drawing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Base 2 - CHS139.7x5thk: 8 Installation Data

    Uploaded by

    Collin Ngu
    4 views1 page
    This document provides installation instructions for anchoring a steel plate to concrete. It specifies using 6 HIT-RE 500 + HAS(-E)R M12 anchors with a hole diameter of 14mm and depth of 110mm in the concrete. The steel plate is 140x140x25mm and requires a minimum base material thickness of 140mm. Recommended tools include a diamond core rig for drilling, compressed air and wire brush for cleaning, and a dispenser, dynamic set tool, and torque wrench for setting the anchors. Coordinates for the 6 anchor locations are provided on the drawing.

    Original Description:

    base design

    Original Title

    Base 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides installation instructions for anchoring a steel plate to concrete. It specifies using 6 HIT-RE 500 + HAS(-E)R M12 anchors with a hole diameter of 14mm and depth of 110mm in the concrete. The steel plate is 140x140x25mm and requires a minimum base material thickness of 140mm. Recommended tools include a diamond core rig for drilling, compressed air and wire brush for cleaning, and a dispenser, dynamic set tool, and torque wrench for setting the anchors. Coordinates for the 6 anchor locations are provided on the drawing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views1 page

    Base 2 - CHS139.7x5thk: 8 Installation Data

    Uploaded by

    Collin Ngu
    This document provides installation instructions for anchoring a steel plate to concrete. It specifies using 6 HIT-RE 500 + HAS(-E)R M12 anchors with a hole diameter of 14mm and depth of 110mm in the concrete. The steel plate is 140x140x25mm and requires a minimum base material thickness of 140mm. Recommended tools include a diamond core rig for drilling, compressed air and wire brush for cleaning, and a dispenser, dynamic set tool, and torque wrench for setting the anchors. Coordinates for the 6 anchor locations are provided on the drawing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Profis Anchor 2.5.

    www.hilti.com.sg
    Company:
    Specifier:
    Address:
    Phone I Fax:
    E-Mail:

    Page:
    Project:
    Sub-Project I Pos. No.:
    Date:

    5/16/2015

    8 Installation data
    Anchor plate, steel: Profile: Pipe; 140 x 140 x 5 mm
    Hole diameter in the fixture: df = 14 mm
    Plate thickness (input): 25 mm
    Recommended plate thickness: not calculated
    Cleaning: Premium cleaning of the drilled hole is required

    Anchor type and diameter: HIT-RE 500 + HAS(-E)R M12


    Installation torque: 0.040 kNm
    Hole diameter in the base material: 14 mm
    Hole depth in the base material: 110 mm
    Minimum thickness of the base material: 140 mm

    8.1 Recommended accessories


    Cleaning
    Compressed air with required
    accessories to blow from the bottom of
    the hole
    Proper diameter wire brush
    y

    Drilling
    Diamond core rig

    Base 2 - CHS139.7x5thk

    150

    30

    150

    Setting
    Dispenser including cassette and mixer
    Dynamic set
    Torque wrench

    150

    60

    119

    6-M16 (embedded L = 300mm)


    20thk PL

    60

    150

    30

    46

    103

    103

    45

    Coordinates Anchor [mm]


    Anchor
    1
    2
    3

    x
    0
    104
    105

    y
    -120
    -60
    60

    c-x
    174
    278
    279

    c+x
    1105
    1001
    1000

    c-y
    200
    260
    380

    c+y
    -

    Anchor
    4
    5
    6

    Input data and results must be checked for agreement with the existing conditions and for plausibility!
    PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

    x
    1
    -103
    -104

    y
    120
    60
    -60

    c-x
    175
    71
    70

    c+x
    1104
    1208
    1209

    c-y
    440
    380
    260

    c+y
    -

    You might also like