Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
687 views

Electrical Technology Lab Practice

The document outlines an electrical technology lab practice course that covers basic electrical equipment, instruments, transformers, motors, generators, and other devices. The course is 03 periods/week for 45 periods/semester. It includes 18 experiments that involve identifying equipment, extending the ranges of voltmeters and ammeters, measuring power consumption, plotting generator and motor characteristics, starting motors, determining transformer ratios, and performing efficiency tests. The experiments provide hands-on experience with common electrical components and circuits.

Uploaded by

M B Hemanth Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
687 views

Electrical Technology Lab Practice

The document outlines an electrical technology lab practice course that covers basic electrical equipment, instruments, transformers, motors, generators, and other devices. The course is 03 periods/week for 45 periods/semester. It includes 18 experiments that involve identifying equipment, extending the ranges of voltmeters and ammeters, measuring power consumption, plotting generator and motor characteristics, starting motors, determining transformer ratios, and performing efficiency tests. The experiments provide hands-on experience with common electrical components and circuits.

Uploaded by

M B Hemanth Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTRICAL TECHNOLOGY LAB PRACTICE

Subject Title
Subject Code
Periods/Week:
Periods/Semester

:
:
03
:

Electrical technology Lab Practice


EC-310
45

List Of Experiments
I. Basic electrical equipment and Instruments
1. To Identify Electrical Machines and Equipment, wires cables etc
2. To Identify & test Single phase Transformer b) Auto transformer c) single phase
Induction motor d) 3 Phase induction motor e) DOL Starter f) Star Delta starter g) Loading
Resistance h) Electric Lamp Load i) Water load Identify and test Electrical Instruments.
3. To Identify A)Moving coil Volt meters B) Moving coil Ammeters c) Moving Iron Voltmeters d)
Moving Iron Ammeters e) Dynamo meter type watt meter .
4. To Convert and extend range of PMMC meters
a) To extend the range of voltmeter using multiplier
b) To observe the Loading effect of volt meter on high impedance circuit
c)To Open and identify the following parts a) Permanent magnet b) Coil c) Former d)
Phosphor bronze springs e) Pointer, Multiplier/Shunt etc a) To convert an ammeter into
Voltmeter

5. To extend the range of ammeter using a shunt Resistance


a) To Measure current using voltmeter and standard Resistance.

6. To Measure the power consumed by a 100 watts incandescent lamp using Voltmeter and
ammeter method a) On AC 230V b) DC 220V
7. To apply a Low voltage to an Incandescent lamp using auto Transformer and observe the
effect of voltage on Light output (Measure the Voltage and current)
8. To Measure the power consumed by an Electric motor (Fan) and Lamp load separately
using wattmeter , Voltmeter and Ammeter and Determine power factor
9. To Connect a 2500 ohm 1A Rheostat in series with a 100 W Lamp and observe the effect
of Variation of Resistance on the input current and Light output
10. To Draw the OCC Characteristics of Shunt generator

11. To Control the speed of a DC shunt motor using a) Armature control method b) Field control
method
b) To reverse the direction of a DC shunt motor
12. To Plot the Load characteristics of DC shunt motor
13. To Start a DC Series motor Using a 2 point/4 point starter
14. To Determine the transformation ratio of a 1 phase transformer
a) Apply rated Voltage to the secondary terminals of transformer using auto transformer and
measure the Voltage across primary winding
15. To Perform OC and SC tests on transformer to determine Efficiency and Regulation at any
given
16. To start a single phase AC motor with DOL Starter
17. To start a 3 phase AC motor with star delta starter and also reverse the direction of rotation
18. To Run the AC 1 Servo motor in forward and reverse directions using SPDT Switch

You might also like