Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Golden Rain

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Golden Rain

by: Stella Felice

Materials
To do the Golden Rain experiment you will need:
1 gram of potassium iodide
1 gram of lead nitrate
200 ml of water in one flask
200 ml of water in another flask
Scale
Gloves
Goggles
A burner

Saftey
Doing any chemistry experiment you will need to be cautious with the
chemicals. Make sure you are in a safe place, and not in a position where your
materials can be knocked over. The lead nitrate in this experiment is very toxic
because its a form of lead. Make sure to wear gloves and be careful of the
fumes. (Solution can be poured down the drain.)

Procedure
1. Measure out 1 gram of potassium iodide, and in a separate container
measure out 1 gram of lead nitrate
2. Measure out 200 ml of water in 2 different flasks, you'll have a total of
400 ml of water.
3. Add the potassium iodide to one flask, and add the lead nitrate to the
other. Make sure all material is dissolved before moving on. (If not
dissolved you may heat the solution on a burner.)
4. Pour the potassium iodide to the lead nitrate solution. Once the solution
has cooled down, your reaction will happen leaving you with golden
crystals.
5. Shine a light through the bottle to see the crystals.

Experimental Process
I experimented with different measurements and many of them didn't work out
very well. I added an extra gram for the chemicals, and used less water for
some of the experiments. In the end I found the best solution; 200 ml of water,
and 1 gram of each chemical.

Chemical Reaction
Recrystallization is a method of purification, which relies on differences of
solubility of compounds in a solvent at different temperatures. The compound
to be purified is very poorly soluble at ambient temperature but significantly
more soluble at elevated temperatures. A certain amount of compound is
mixed with a solvent, the solution is heated at which stage the compound
dissolves. Then the solution may be filtered while hot if needed (to remove
insoluble impurities) and is then allowed to cool down slowly. The compound
crystallizes, typically in a very pure form and can be collected. In this
experiment, lead iodide will be recrystallized.

You might also like