COLOR TELEVISIONS

INSTRUCTIONMANUAL

Please

PF2020

PF2720

PF3220

PF2030

PF2730

PF3230

read this manual

carefully

before

operation.

Instruction

Manual

WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Caution: To reduce the risk of electric shock, do not remove
cover (or back). No user serviceable parts inside. Refer
servicing to qualified service personnel.

//_

Caution:

This
indicates"dangerous
voltage"
insidesymbol
the product
that presents a risk
of
electric shock or personal injury.

///_

This
symbol indicates
important
accompanying
the product.

instructions

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention:
Pour _iter tes chocs dectriques, introduire la lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu' au fond.
Refer to the identification/rating

label located on the back panel of your product for its proper operating voltage.

Caution: Using video games or any external accessory with fixed images for extended periods of time can
cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some
network/program Iogos, phone numbers, etc. may cause similar damage. This damage is not covered by your
warranty.
Cable TV Installer:
This reminder is provided to call your attention to Article 820-40 of the National Electrical Code
(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable
entry as practical.

Customer

Record

You wilt find the model number and chassis number of your TV on the back of your TV set. Record these numbers in the
spaces provided below. Refer to them whenever you call APEX Digital customer service or your APEX dealer regarding
this product.

Model Number:

Chassis

PACKING

Number:

LIST

Parts

QTY

Color TV Receiver

Remote Control

Operation

Manual

AAA Alkaline Batteries

1
2

Instruction

Manual

IMPORTANT

SAFETY INSTRUCTIONS

1.
2.
3.
4.
5.
6.
7.
8.

Read these instructions.

Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for tong periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Warning - This TV should only be serviced by an authorized and properly trained technician.
Opening the
cover or other attempts by the user to service this TV may result in serious injury or death from electrical
shock, and may increase the risk of fire.

IMPORTANT STAND AND BASE SAFETY INFORMATION

Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to prevent
the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage the
TV. Refer to the Important Safety Instructions above.

FCC Warning
Class B Computing Device
Information to User
This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no
guarantee that interference wilt not occur in a particular installation. If this equipment receives interference while off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and TV.
3) Connect the equipment into an outlet on a circuit different from that to which the TV is connected.
4) Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful: "How to Identify
and Resolve Radio - TV Interference Problems". This booklet is available from the US Government Printing Office.
Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
NOTE:

In order for an installation of the product to maintain compliance with the limits for a Class B Device, shielded
cables must be used.

Instruction

Manual

]
TABLE OF CONTENTS

INTRODUCTION
Safety Precautions
Specifications
Feature Descriptions
Front and Rear Unit Profiles
Remote Control Features

1
3
4
5
8

INSTALLATION
Connecting the Antenna
Installing the Remote Control Batteries ............................................................................................
Connecting A/V Equipment ...............................................................................................................
Input from Device to TV
Output from TV to Device

9
9
10
10
10

FUNCTIONS & FEATURES

Turn On/Off
Basic Functions ..............................................................................................................................
Function Selection Menus
Useful Remote Control Features
ADDITIONAL

FEATURES

Programming

the Remote Control

TROUBLESHOOTING
LIMITED

13
13
13
16

18

GUIDE

22

UNITED STATES WARRANTY

23
SPECIFICATIONS

MODEL

PF2020

PF2030

PF2720

PF2730

Television System

NTSC-M

Channel Coverage

VHF 2-13, UHF 14~69

Mid Band (A-8~A-1, A~l)/Super

PF3220

PF3230

Band (J~W)

Cable TV Coverage
Hyper Band (AA~ZZ, AAA, BBB)/Ultra
Channels Preset

Band (65-94, 100~125)

181

Antenna Input

75 ohm (unbalanced)
15.98x12.01 in

21.26x 15.94 in

25.20x 18.82 in

406x305 mm

540x405 mm

640x478 mm

2W+2W

5W+5W

5W+5W

Screen Dimensions
Audio Output
Power Source
Unit Weight
Unit Dimensions

~120Vac 60Hz
55tbs. (25kg)

97.91bs. (44.5kg)

23.03xl 8.14xl 9.09 in.

29.09x22.83x19.29

585x461x485mm
Packaged
Dimensions

25.79x21.02x22.24

in.

655x534x565mm

1561bs. (71kg)
in.

33.70x26.34x22.05

739x580x490mm

856x669x560mm

33.07x26.38x23.43in.

40x30.55x27.76in.

840x670x595mm

1016x776x705mm

Power
100W

135W

Consumption

170W

in.

Instruction

Manual

I Feature Descriptions]
181 Channel Tuner - total number of channels the TV can receive: 2-69 in Air mode, or 1-125 in Cable mode
AV Input (Rear) - standard composite input designed for use with A/V devices, such as a VCR or DVD player
AV Input (Side) - input designed for infrequent use, such as with a camcorder or video game unit
AV Output (Rear) -output signals from TV to devices such as a VCR
S-Video Input - input designed for greater clarity and sharpness; also known as S-VHS
DVD Input (Rear) - standard input designed for use with DVD player
RF IN Jack - standard coaxial antenna jack
Channel Recall - instant return to the last channel viewed
Closed Caption Display - feature that displays the closed captions or text of a TV broadcast
Parental Control - feature that all parents to block out selected type of programming
Screen Size - the diagonal size of the TV screen
Selectable
Picture Modes - preset standards for TV display: User, Normal, Movie, and Sports
Selectable Sound Modes - preset standards for TV sound: User, Normal, Speech, Music and Movie
Trilingual
On Screen Display (OSD) - TV's on screen display, can be either English, French, or Spanish
MTS StereoNideo
Stereo- stereo sound for superior TV viewing experience
Favorite Channel -used to set favorite channels
Channel Label -used to label channels
Full -used to switch the TV between Wide and Normal modes
On/Off

Timer

- feature that allows the user to set a timer to turn on/off the TV and tune the TV to a preset channel
at preset time

FEATURES

PF2020

PF2030

PF2720

PF2730

PF3220

PF3230

S-Video Input

DVD Input (Rear)

AV Output (Rear)
Screen Size

1
20"

1
20"

1
27"

1
27"

1
32"

1
32"

181 Channel Tuner

......

AV Input (Rear)
AV Input (Side)

Pure Flat CRT

......

Universal Remote Control

......

Auto Program
Channel Recall

......
......

Closed Caption
Parental Control

......
......

Picture Modes

......

Trilingual OSD
Sound Modes

......
......

MTS Stereo/AV Stereo

......

Favorite Channel

......

Channel Label

......

Full

......

On/Off Timer

......

Sleep Off/Auto Off without Signal in TV Mode

......

AVC (Automatic Volume Control)

3 Lines Comb Filter

......
......

VSM

......

Color Temp Control

......

X-Ray Protection
Blue Back On/Off

......
......

Digital Geometric Correction

Child Lock

.....
.....

Black Level Stretch

.....

Automatic White Balance Adjustment

.....

Instruction

Manual

Front and Rear Unit Profiles

Front panel
PF2020/PF2030

A_------X

--

STANDBY
INFRARED SENSOR
POWER LED

IV IN(;:
VIDEO

oi

VIDEO

MENU

L/MIINO

--

VOL -t-

--

CH -4-

MENU
SELECT
TV/VlI}EI1SELECT
VlILUMEDIIWN/UP CHANNELDBWN/UP

Rear panel
1
BUT

AUDI[
R

VIDEO

DVD IN
Cr

Cb

-- R_----LIMBNB=

AUDIO

VIDEO

AVIIN(2>
__)

IN(I>-.
S-VIDEFI

Instruction

Manual

Front and Rear Unit Profiles

(continued)

Front panel
PF2720/3220

A
--

STANDBY
INFRARED SENSOR
POWER LED

T
AVIN(4)
VIDEO

_AUDIO_

VIDEO

LmONO

MENU

--

VOL -t-

--

CH -t-

MENU
SELECT
TV/VIDEBSELECT
VBLUME
DBWN/UP CHANNELDI]WN/UP

Rear panel

-AV0_]

_EO

AUDIO

j
6

I
R

Instruction

Manual

Front and Rear Unit Profiles

(continued)

Front panel
PF2730/3230
B

i
i
i
i
i
i

_x

[?

--

STANDBY
INFRARED SENSOR
POWER LED

;-_E0(<

VIDEO

,,1

_AUDIO

VIDEO

MENU

--

VOL

-t-

--

CH

-t-

L/MONO

-.j

Av
IN(4)

MENUSELECT
TVIVII)EFI
SELECT
VilLUME
DIIVNIUP CHANNELDIIWNIUP

Rear panel

-AVIN(3

-AVliNT

,I
0

VIDE_

L/MIINII Cb

C_

AUDID

I
R

Instruction
I Remote

Manual

Control

Features

Led

Indicator light

Set

Used for
control

Video

Cycles through the Video/TV modes

Picture

Selects the various Picture Modes

Arrows

Used to navigate the TV menus

CH +/-

Used to change the current channel

Display

Brings up the TV/Video display

Function

Used for child lock

MTS/SAP

Selects
the MTS Stereo
modes
among Mono, Stereo and SAP

CC

Activates Closed Captioning

Full

Switches the TV between

Normal modes

Favorite

Sets favorite channels

Standby

Turns on/off the TV

Keypad

Used to select channels by number

programming

TV, DVD/VCR, SAT/CAB, AUX switch

Determines the equipment
by the remote

the

remote
STANDBY

KEYPAD

Wide and

controlled

Menu

Accesses the main menu

Sound

Selects the various Sound modes

Enter

Confirms
menus

VOL + / -

Used to adjust the volume level

Sleep

Activates/Deactivates

Mute

Mutes or restores the TV volume

Recall

Returns to the last channel viewed

Scan

Scans all active channels

Label

Used to label channels

selections

or accesses

MTSISAP

SCAN RECALL
RECALL

RITE_

sub

Ai =X

the sleep timer

CK5D-C1

SCAN

LABEL

Instruction

Manual

INSTALLATION
-

Please read the safety instructions in this manual completely before installation.
Install your TV in an area where direct sunlight will not fall upon the screen.
Soft, indirect light is best for television viewing.
Allow enough space (at least 4 in.) between the TV and any walls or enclosures for proper ventilation.
Optimum television viewing distance is 3-5 times the screen's size.

Auto-Deqaussinq
Color television can be easily affected by magnetism, which shows as color distortion on the screen. If your TV is affected
by nearby magnetic components or appliances, turn it off for a few minutes. The built-in auto-degaussing circuit will
eliminate the magnetic interference.

I Connecting

the Antenna

75-ohm coaxial cable (not supplied)

VHF
UHF
or Cable
_I

300-ohm twin-lead cable (n_

Li

/_(nte_
Xnnaadapter _

VHF

RF Input
(back of TV unit)

(not supplied)

UHF

(not supplied)

Notes:
1. It is recommended

that a 75 ohm coaxial cable be used in order to

eliminate interference and noise which may occur due to nearby radio transmissions.
2. The antenna cable should not be tied together with other wiring.
3. Set up a lightning rod and check it regularly when an outdoor antenna is used.

I Installing

the Remote

Control

1. Remove the battery compartment

Batteries

lid.

2. Insert two AAA batteries (included). Make sure the positive (+) and negative (-) polarities are correctly aligned.
3. Reattach the battery lid.

Notes:
1. Alkaline batteries are recommended for longer life.
2. Always replace both batteries at the same time.
3. Do not expose batteries to fire or break them open.
4. To avoid battery leakage, remove batteries from the remote control when it is not being used for a long period of time.
5. If the remote control can't control the TV properly after new batteries installed, remove the batteries from the
remote control and hold down the F key for over 5 seconds. Insert the batteries and try again.

9
PF2020-PF3230

2003.5.8

J_

Instruction

Manual

INSTALLATION
Connecting

.(continued)

AN Equipment

PF2020/PF2030

The following are diagrams showing basic instructionsfor attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video equipment that will be connected to your set for
additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING

DEVICES TOGETHER.

Connect VCR's RF OUT terminal to the RF IN jack located on the rear panel of the TV.

=_

--__j

_1

Coaxial Cable

RF IN

%[P
VCR

I Input from Device to TV 1

AUDIONIDEO IN

DO NOT use the DVD IN terminals and AV IN (2) terminals at the same time.
DO NOT connect side AV IN(1),rear AV IN(l) and S-Video terminals at the same time. Use only
one of the three.
With DVD signal input, there is no DVD video output. Also, remember to connect the audio
cables when using S-Video and DVD terminals.

DVD Player
With S - VIDEO Terminal
_VIN(I:

VlDED
VIDEO

_8Z33=

_UDIEL

UD,O

Camcorder

L/MBNI]

YCbCr

VCR

I Output from TV to Device

I
VIDEO

AUDIONIDEO OUT

@
AUDIO

1
rlUT

_AUDIDQ
VIDEII

VCR

The side terminals may be easier to use with a camcorder. The connections

10
PF2020

2003.7.31

are identical.

Instruction

Manual

INSTALLATION
Connecting

(continued)

AN Equipment (continued)

PF2720/PF3220

The following are diagrams showing basic instructionsfor attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video

equipment that will be connected

additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING

to your set for

DEVICES TOGETHER.

Connect VCR's RF OUT terminal to the RF IN jack located on the rear panel of the TV.

OoaxaOa e
VCR

%_

I Input from Device to TV I

AUDIONIDEO

IN

DO NOT use the DVD IN terminals

DO NOT connect
input, there
S-Video

and AV IN(3) terminals

both AV IN(l) and S-Video

is no DVD video output.

terminal.

Also, remember

at the same time.

Use only one of the two. With DVD signal

to connect

the audio cables when

using

and DVD terminals.

DVD Player

With S - VIDEO Terminal

Av_N
(4)
VIDBO

VIDEO

FAIJDIO_

(7

oo,o

Camcorder

L/MO_o

YCbCr

VCR

I Output from TV to Device

I
VIDEO

AUDIONIDEO OUT

VCR

The side terminals may be easier to use with a camcorder.

11
PF2020

2003.7.31

)_

The connections

are identical.

Instruction

Manual

INSTALLATION
Connecting

(continued)

NV Equipment (continued)

PF2730/3230

The following are diagrams showing basic instructionsfor attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video

equipment that will be connected

additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING

to your set for

DEVICES TOGETHER.

Connect VCR's RF OUT terminal to the RF IN jack located on the rear panel of the TV.
21_

C) _1

Coaxial Cable

RF IN

VCR

Ell?

I Input from Device to TV I

AUDIONIDEO

IN

DO NOT use the DVD IN terminals

DO NOT connect

both AV IN(l)

and AV IN(3) terminals

and S-VIDEO(I)

use the AV IN(4) and S-VIDEO(4)

terminals

DVD video output. Also, remember

terminal.

at the same time.

Use only one of the two. DO NOT

at the same time. With DVD signal input, there is no

to connect

the audio cables when

using S-Video

and DVD

terminals.
DVD Player

With S - VIDEO Terminal

_,
wEo(4

VIDEO

VIDEO

_AL_IO-

uo,o

Camcorder

L/_o_o

--RAW(4)

YCbCr

VCR

}Output

from TV to Device I

-AVUUT

VIDEO
AUDIONIDEO OUT

uo,o

A@II]

VCR

The side terminals may be easier to use with a camcorder.

12
PF2020

2003.7.31

The connections

are identical.

Instruction

Manual

FUNCTIONS

& FEATURES

Turn On/Off 1
1. Turn On
Plug in the supply cord, and the TV should enter the Standby mode. Pressing the STANDBY on the remote control or on
the TV can turn on the TV. Also, the power indicator light on the TV will come on.
2. Standby
(Soft Off)
While the TV is on, press the STANDBY key. This will put the TV in Standby or soft off mode. The power indicator light
on the TV set will turn off.
3. Auto off when no signal received
The TV set will automatically enter into Standby mode when the following conditions are met.
1) TV is in antenna mode.
2) Current channel has no signal.
3) No key is pressed within 15 minutes.

I Basic Functions

Changing the Channel

While in Tuner mode, press the CH +/- keys to change the channel, or use the numeric keypad to enter a new channel.

Adjusting

the Volume

To increase or decrease the volume, press the VOL +/- keys. The volume adjustment ranges from 0 to 100.

Muting the Volume

To mute the volume, press the MUTE key. To restore the volume, press MUTE again.

[ Function Selection Menus J

All Function menus can be accessed by pressingthe MENU key on the remote control or the top panel. Navigationof the menu be
done withthe arrowsand ENTER keys on the remoteand- CH + and - VOL + keys on the top panel. Exitwith the MENU key.

Video Setting

Menu

This menu allows you to adjust the various picture settings.

Access
From the Main menu screen, press the left or right arrow key until Video
Setting is highlighted. Then the Video Setting menu is displayed.

Video Setting
Picture Mode
Picture Control
Auto Black Lvl
VSM

Picture Control:

Press the up or down arrow key to select Picture

Contro/and right arrow key or ENTER key to access the sub menu. Use
the up or down arrow key to move between the various settings, and the
left or right arrow key to adjust them.
CONTRAST: 0 (minimum contrast) to 100 (maximum contrast)
BRIGHTNESS: 0 (dimmest) to 100 (brightest)
COLOR: 0 (minimum color) to 100 (maximum color)
SHARPNESS: 0 (minimum sharpness) to 100 (maximum sharpness)
TINT: -50 (more purplish) to +50 (more greenish)
COLOR TEMP: Cool, Standard or Warm

Picture Mode: Use the left or right arrow key to select among
User, Normal, Movie and Sports.

Auto Black Lvh This feature improves gradation of picture. Press

the left or right arrow key to set it On or Off after Auto B/ack Lv/is
highlighted.

I Move:_

Enter:|

Picture Control
Contrast
Brightness
Color
Sharpness
Tint
Color Temp

Move: f _

ADJ: *--*

Normal
_,
On
On

Exit :_EN0-]I

50
50
50
50
10
Warm

Exit:[ME_7

VSM: This feature allows you to improve sharpness. Press the left
or right arrow key to set it On or Off after VSM is highlighted.
Note:
This function is not available for PF2020, PF2720 and PF3220. For PF2030, PF2730 and PF3230, it doesn't work
in the DVD mode.

13

PF2020-Pf3230

_:

2003.5.8

)_

Instruction

Manual

FUNCTIONS

& FEATURES

(continued)

I Function Selection Menus (continued) I

Audio Setting

Menu

This menu allows you to adjustthe various audio settings.

Access
From the Main menu screen, press the left or right arrow key until
Audio Setting is highlighted. Then the Audio Setting menu is
displayed.
Sound Control: Press the up or down arrow key to select Sound
Controland right arrow key or ENTER key to access the sub menu.
Use the up or down arrow key to move between the various settings,
and the left or right arrow key to adjust them.

Audio Setting
Sound Mode
Sound Control
Surround
AVC

Move: _ _

Enter: _

User
Off
Off

Exit:IMP-0]

BASS: 0 (less Bass) to 100 (more Bass)

TREBLE:

0 (less Treble) to 100 (more Treble)

BALANCE: -50 (Left Dominance)

SURROUND: Off, On

Sound Control
Bass
Treble
Balance

to +50 (Right Dominance)

AVC: Off, On

40
60
0

Sound Mode: Use the left or right arrow key to select among
User, Normal, Movie, Speech and Music.
AVC: This feature will automatically
control volume. Highlight
AVC and use the left or right arrow key to set it On or Off.

Move:

t_

ADJ:*--*

Exit:IMEN-0] I

Surround:
This feature offers dynamic acoustic effect. Highlight
Surround and use the left or right arrow key to set it On or Off.

Channel

Setting

Menu

Access
From the Main menu screen, press the left or rightarrow key until
Channel Setting is highlighted. Then the Channel Setting menu is
displayed. Use the up or down arrow key to move between the
various settings, and the left or right arrow key to adjust them.
Favorite Channel: This feature allows you to set favorite
channels. Use the up or down arrow key to highlight Favorite
Channel, and the right arrow or ENTER key to call up the sub
menu.
1. When Mode is set to Auto, use the numeric keypad to directly
enter the favorite channel numbers. The TV only stores the last
five effectivechannels.
2. When Mode is set to Manual, The TV stores favorite channels
respectively in Air and Cable mode. Use the up or down arrow
key to move between the various selections,and the left or right
arrow key or numeric keypad to select the favorite channel
numbers. Press the ENTER key to shift the TV to the selected
channel.

Channel Setting
Favorite Channel
Add / Erase

Add

Antenna

Cable

Auto Program
Channel Label

Start

Move:*-_

Enter:[E-Nf-E_ Exit:IMP-0]

Erase/Add: This feature allows you to add or remove the channel currently displayed on screen from the "active
channel list."Active channel list is the list of channel that is available by pressingthe CH+/- keys. Use the left or
right arrow key to select Add or Erase.
Antenna: This feature sets the TV tuner to an Air antenna or a Cable antenna. Please use Air mode when using
an over-the-air antenna; use Cab/e mode for a cable hookup. Use the left or right arrow key to select between the
two options.
Auto Program: This feature will setup the Active channel list for the user. The list will includeonly the channels
with a signal detected. Pressthe right arrow key to begin and the left arrow key to stop the process.

14
PF2020-Pf3230

_:

2003.5.10

Instruction

Manual

FUNCTIONS
I Function
Channel

& FEATURES
Selection

Label:

(continued)

Menus (continued)

This feature allows you to label channels in up to 5

characters. Use the up or down arrow key to highlight Channel Label,

and the right arrow key to call up the sub menu.

Channel Label
_Channel

1. Use the up or down arrow key to choose Channel, and the left or
right arrow key to select the channel (the current channel is
default).
2. Choose Name in the same way as above. Use the left or right
arrow key to select one of the characters (including 0-9, &,/, - and
A-Z) cyclically, and the up or down arrow key to move the cursor.

121

Name:

I Move:

f_

ADJ: *--+

Exit:_E-N-_ I

Notes:
1. If a channel has been labeled, the TV will display
corresponding channel name when shifted to the channel.
2. In the AV mode, channel setting menu is not available.

Timer Setting

the

Menu

This menu allows you to set a time for the TV to turn on or off and
tune the TV to a specific channel at preset time.
Access:
From the Main menu screen, press the left or right arrow
key until Timer Setting is highlighted. Then the Timer Setting menu is
displayed. Use the up or down arrow key to move between the
various settings, and the left or right arrow key to adjust them.
Notes:

Timer Setting
Current Time
01:00AM
Time
Channel
1: 07:30PM
121 A
2: 04:00PM
80
3: 09:45AM
40
4:
:
--5:
:
--Off Time
:

Once
Always
Off
Off
Off
Always

1. Only after you set the current time, can you set On Time, On
Channel and Off Time.
2. On/off time can be set to one of the three modes: Off, Once and
Always.

Parental Guide Setting

Move:

f _

ADJ: *---_

Exit:_E-N-U]

Menu

This feature allows parents to block certain programs from being

viewed, based on the programs' rating.
Access:
From the Main menu screen, press the left or right arrow
key until Parental Guide Setting is highlighted. In order to access this
menu, you must first enter a pass code. The factory default is 1225.

Parental Guide Setting

Password
Enter Password

Parental Guide: Only with Rate Setting On, are TV-Rating and MPAA-Rating displayed. Press the up or down
key to move between the two items and right arrow key to access the TV-Rating or MPAA-Rating grid.
TV-Ratinq" Using the up or down arrow key to navigate between the ratings, press the left or right arrow key to
select U or B. A U indicates a rating which is unblocked and a B indicates a rating which is blocked.

Parental Guide
Rate Setting
TV-Rating
MPAA-Rating
Password Setting
I Move:

t_

ADJ: *--*

TV-Rating
Rating
TV-Y _
TV-Y7
TV-G
TV-PG
TV-14
TV-MA

On
_I_
I_
Exit:_E-N-U]

Move: f _

15

FV
U
U U
U
U
B
B
ADJ: _

U
B

U
B
B

U
B
B

U
B
B

Exit:[MENU-]

Instruction

Manual

FUNCTIONS
I Function

& FEATURES.(continued)
Selection

MPAA-Rating:

Menus (continued)

Use the up or down arrow key to navigate between

the ratings. Pressing the MENU

block that particular

rating

key with a rating highlighted will

from being shown on this TV. A

indicates a rating which is unblocked and a B indicates a rating which

is blocked. Please note that blocking a lower rating (for example, PG)

MPAA-Rating
_G
PG
PG- 13
R
NC-17
X

U
U
U
U
B
B

will block all higher ratings (PG-13, R, NC-17, X.)

Age

Defined

TV - Y

All Children

as

TV - Y7

Directed

to Older

TV - G

General

Audience

TV - PG

Parental

TV - 14

Parents

Strongly

TV - MA

Mature

Audience

Guidance

Children

(over 7)

Suggested
Cautioned

Contents

Defined

as

FV

Fantasy

Violence

Sexual

Adult

Sexual

Violence

Move: t _

ADJ:*- --*

Exit:[MENU-]I

Dialogue
Language
Situations

Only

Password
Settinq: This feature allows you to change the access
code for the Parental menu. Press the right arrow or ENTER key to
access the sub menu. Then enter the new password using the
numeric keypad. If the right number was entered, "New Password
OKf' are displayed on the screen. If not, "Invalid! Enter again?' are
displayed.

Password Setting
_New
Password
Confirm
Enter Password

Setup Menu
From the Main menu screen, press the left or right arrow key until
Setup is highlighted.Then the Setup menu is displayed. Use the up or
down arrow key to move between the various selections in this
menu.

Lanauaae: This feature allows you to pick a language used for the
on screen display (OSD). Use the left or right arrow key to select the
language of your choice - English (Eng.), French (Fra.), or Spanish
(Esp.).
Blue Backqround: This feature gives you the option to display a
blue background on the TV screen when there is no signal present.
Use the left or right arrow key to toggle between on and off.

Setup
--+ Language
Blue Back
Closed Caption

I Move: t _

English
On
CC1

ADJ:*- --*

Exit:_E-N-_

Closed Caption:
Closed caption is a feature that allows your TV set to display closed caption signal on screen. It
also allows you to display teletext signal. There is nine different setting for closed caption. You can set it to one of
the 4 Closed Caption settings (CC1-4), one of the 4 Text settings (T1-4), or set this feature to off (CCD/Text off).

L Useful Remote Control

Features

Display
This key allows you to display the current
Display disappears in about 6 seconds.

information

of the TV screen (channel,

antenna

mode, time, video, etc.).

0-_.99
Press the 0-9 keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).
1.To choose a one-digit channel number, press the corresponding
Number key directly to switch to the desired
channel number in about 3 seconds.
2.To choose a two-digit channel number, enter a first-digit and then a second digit within 3 seconds.
3.To choose a three-digit channel number, enter a first-digit, second-digit and third-digit respectively
mentioned above.

in the way

Scan
Press the SCAN key to display the current channel No. and Scan mode (Scan On or Scan Off). Press the key firstly
to display Scan Offon the screen. Press the key secondly to display Scan On on the screen. And the TV begins to
scan through all active channels. Upon completion, the TV automatically returns to the current channel and shifts to
the Off mode. Pressing any key can interrupt scanning.

16

Instruction

Manual

FUNCTIONS

& FEATURES

(continued)

Useful Remote Control Features (continued)

Picture
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture
modes, press the PICTURE key, and you can choose among User, Normal, Movie and Sports.
Sound
Press the SOUND key repeatedly, and you can choose among User, Normal, Movie, Speech and Music.
Recall
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the channel
you just left.
Favorite
This key will display the favorite channel if a favorite channel is set.
Ful___J
This key will switch the TV between Wide and Normal modes.

c_
Pressing the CC key will activate the currently selected Closed Caption or Text. Press the key repeatedly to select
another mode in turn.
/

oFF-ool- 002 003 004 T1--T2--T3 T/

Video
This key allows you to toggle between antenna mode and differentvideo modes cyclically:
For PF2730 and PF3230:TV_Videol(S-VHS1)_Video2
_Video3_Video4(S-VHS4)_
DVD
For PF2720 and PF3220: TV_Videol(S-VHS)_Video2_Video3_Video4_DVD
For PF2030 and PF2020: TV_Videol_Video2_S-VHS--DVD
Child

Lock

The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and then
press MUTE. This will lock out all remote functions (except for Standby) and Child Lock On will be displayed for 6
sec. You can see only the current channel with normal picture and sound. With Child Lock set before turn-off, no
picture and no sound are available from the TV if the TV is turned on again, but only Child Lock On displayed. To
unlock the TV, press and hold the F key and press MUTE. This will unlock the TV. Please note that the only way to
activate or deactivate the Child lock feature is via remote control - please insure that it is stored securely.

Press the SLEEP key repeatedly to switch the TV to one of the following modes cyclically: Off-* 15_30_45_60_
90_120_150_180
(Unit: Minute). With Sleep Off set, press the SLEEP key firstly to display the remaining time
and press it secondly to re-set the Sleep Off time.
"TV will turn offsoon!" will be displayed on the screen one minute before the Sleep timer runs out.

MTS/SAP
In the TV mode, the TV can automatically identify MTS stereo modes to one of Mono, Stereo, Stereo/SAP and
Mono/SAP. Under no signal condition,the audio mode does not appear on the screen.
When receiving signals from external equipment in the Video mode, Stereo is defined as default. Press the
MTS/SAP key repeatedly to set Input to Stereo, L or R.
Press the key firstly after OSD disappearsto display the auto-identifiedMTS mode. Press it again before the OSD
disappearsto compulsorilyset another MTS mode.
Signal Received

Press MTS/SAP key

STEREO

STEREO, MONO

MONO/SAP

SAP, MONO

STEREO/SAP

STEREO, SAP, MONO

MONO

MONO

Label
This key functions only in the TV mode. For an explanation of this feature, please see page 15.

17

Instruction

Manual

ADDITIONAL

FEATURES

Programming

the Remote

Control

1.Set the TV, DVD/VCR, SAT/CAB, AUX switch to the device you want to control
2.To program the remote control
1)Press and hold the SET key for over 3 seconds until the LED indicator on the remote control turns off. Release the key
and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Use the 0-9 keys to enter three-digit code number for your device. If the right code number was entered, the LED blinks
three times. If you enter a code not listed below, or you press any other keys than STANDBY and ENTER, the LED
turns off.

3)"TV": To control TV. "DVD/VCR": To control DVD, VCR, LD and CD. "SAT/CAB": To control satellite receiver
and cable box. "AUX": To controlall the above appliances
3.To search codes
1)Press and hold the SET key for over 3 seconds until the LED indicator on the remote control turns off. Release the key
and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Press the STANDBY

key and code search begins.

3)
Press
Up or down
arrow key
ENTER

Description
The remote control searches codes upwards or downwards. Each time you press the up or
down arrow key, the code number for the STANDBY key increases or decreases by 1; or the
code number automatically increases or decreases by 1 per 3 seconds. Try each code
separately until you find the one that works. If not after trying all the codes, LED blinks rapidly
eighttimes and search stops.
If the desired code number is found, press the ENTER key to confirm the current searched code
number for your device. Then LED blinks rapidlythree times to exit from search.

Other keys

LED blinks rapidlyeight times and search stops.

4)When the TV, DVD/VCR, SAT/CAB, AUX switch is set to the "AUX" position,the remote controlcan not search
code.
4.To check the current code number
1)Press and hold the SET key for over 3 seconds until the LED indicatoron the remote control turnsoff. Release
the key and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Press the ENTER key.

3)You may read the code number according to the LED display status as follows.
Code Number
LED Display Status
First-digit

Second-digit

Third-digit

First-digit

Second-digit

Third-digit

Blinks rapidly once

Blinks rapidly once

Blinks rapidly once

Blinks once

Blinks rapidly once

Blinks six times

Blinks rapidly once

Blinks four times

Blinks three times

Blinks once

Blinks five times

Blinks rapidly once

5.To use the REC key

The REC key functions

only when it is pressed twice continuously.

18

Instruction

Manual

TV CODES
Brand

Code Number

Brand

CodeNumber

APEX

157,158,159,160,161,162

Megatron

047

Admiral

001,119

Memorex

003,067,068,115,151

Adventura

120

MGA

004,013,014,015,040,065,067

Aiko

011

Midland

042,110,124

Akai

002

Minutz

041

Aileron

036

Mitsubishi

Amtron

030

Montgomery

030,133,134,135,154

Motorola

119,154

AOC

003,004,005,136

MTC

004,084

Audiovox

030

NAD

058,059,128

Bell & Howell

001,068,115

N EC

004,070,014,139,154

BeIcor

003

Nikko

011

Bradford

030

NTC

011

Brokwood

003

Optimus

128

Candle

003,005,006,120

Optonica

077,119

Celebrity

002

Orion

027,145

Citizen

003,005,006,011,030,084,120,121

Panasonic

042,050,1 46,150,154

Colortyme

003,005,007,139

Philco

006,008,013,055,056,061,063,069,126,127

Concerto

003,005

Contec/Cony

008,009,030

Philips

006,008,013,055,056,061,062,071,072,073,154

Craig

030

Pioneer

074,075,122,128,149

Curtis Mathes

000,003,005,010,084,115

Portland

011

Daewoo

004,005,011,012,098,099,132,141

Price Club

084

Daytron

005

Prism

042

Dimensia

000

P roscan

000,124

Dumont

110

Proton

008,076,129

Electroband

002

Pulsar

110

Electrohome

013,014,015,154

Quasar

042,057,1 46

Emerson

008,016,017,018,019,020,021,022,023,024

Radio Shack

000,038,077,115

025,026,027,028,029,030,031,032,033,034

RCA

000,078,079,080,081,082,124,130,132,141,142

035,036,037,096,115,121,122,145,154

Realistic

038,077,115

Fisher

038,039,040,115,123

Runco

110

Fujitsu
Funai

036

Samsung

010,012,014,083,084,140,143

036

Sansui

145

GE

000,015,041,042,043,072,116,117,118,

Sanyo

038,039,065,085,123

124,147,154

Scott

017,027,036

Goldstar

004,008,013,014,044,045,046,113

Sears

009,014,036,038,039,040,054,058,059,086,087

Gibralter

110

Grundy
Hitachi

036

Sharp

022,077,088,089,090,091,095,119

008,009,047,046,049,103,104,105,106,

Signature

001,068,151

107,108,109,122,137,138

Simpson

006

Infinity

050

Sony

002,1 44,153

JaneiI

120

Soundesign

006,036

JBL

050

Squareview

131

JC Penney

000,004,006,015,041,042,046,051,052,

Supre-Macy

120

059,072,084,124,146

Supreme

002

JCB

002

Sylvania

055,056,061,062,063,069,073,092,126,127,152

JVC

008,009,042,046,053,054,114,125

Symphonic

131,155

Kawasho

002

Tandy

119

Kenwood

013,014

Tatung

122

Kloss Novabeam

055,056,120,126

Technics

042

KTV

057,121

Teknika

009,011,062,067,068,084,151

Loewe

050

Tera

129

Logik
LXI

068,151

Toshiba

038,058,059,084,086,140

000,038,050,058,059,060,115,124

Universal

041,072

Magnavox

006,013,050,055,056,061,062,063,

Victor

054,125

069,073,100,101,102,126,127,152

Viking

120

M_estic
Mamn_

068

Wards

001,017,041,055,056,061,062,068,069,072,073

Mamn_

050,064

Anam

National

004,013,014,015,040,065,066,067,097
Ward

068

152,154

123,124,131

050

077,093,094,127,155
Zenith

19

110,111,112,1

46,151

Instruction

Manual

DVD CODES
Brand

Code Number

Brand

Code Number

APEX

362,363,364,365,366,367,368,369,370,435,436,437

Philips

347,355,356,357

Aiwa

351

Pioneer

345,350

Hitachi

352

Proscan

349

JVC

348,353

RCA

349

Magnavox

347

Sanyo

358

Mitsubishi

346

Panasonic

354,361

Sony
Toshiba

344,359,360
343

VCR CODES
Brand

Code Number

Brand

Code Number

Admiral

415

Magnavox

385,386,399,403

Aiwa

382,427,428

Marantz

375,376,378,385,399,403,416

Akai

392,421

Marta

418

Amstrad

382

MEI

403

APEX

438

Memorex

373,382,403,415,418,420

ASA

399

MGA

372,387,398,423

Audio Dynamics

376,416

MinoIta

384,389

Audiovox

418

Mitsubishi

372,374,387,394,398,400,423

Broksonic

417,419

Motorola

415

Bush

381

MTC

382,420

Calix

418

Mutitech

379,381,382,420

Candle

378,418

NEC

375,376,378,392,394,400,406,416

Canon

403,404

Nikko

418

Capeheart

391

olympus

424

Carver

385

Optimus

415,418

CCE

421

Optonica

388

Citizen

378,379,418,421

Panasonic

377,390,403,407,408

Craig

373,379,418

Pentax

378,384,389

374,378,403,414

Perdio

382

Daewoo

391,405,419,421,422

Philco

385,386,403

Daytron

391

Philips

385,388,399,403

DBX

376,416

Pilot

418

Dimensia

425

Pioneer

376,384,394,400,416

Dynatech

382

Portland

391

EIectrohome

372,418,423

Proscan

374,414

Electrophonic

418

Quasar

396,397,403

Emerson

372,380,382,387,417,418,419,423

Radio Shack

371,372,373,383,388,415,418,420,423

Fisher

371,373,382,383,393

Radix

418

Funai

419

Randex

418

GE

374,379,403,414

RCA

374,379,384,389,407,414

Go Video

401,402,429

Realistic

382,383,388,403,415,418,420,423

Goldstar

378,418,421

Ricoh

411

Goodmans

381

Salora

398

Gradiente

420

Samsung

379,405

Grundig

399

Sanky

415

Harley Davidson

420

Sansui

376,392,394,395

Harman

406

Sanyo

373

Hinari

381

SBR

399

Hitachi

382,384,389,392

Schneider

381

Instant Replay

426

Scott

380,387,417,419

JC Penney

375,376,379,389,392,403,406,416,418

Sears

371,373,383,384,389,393,418

Jensen

384,392

Sharp

372,378,423

JVC

375,376,378,392,394,400,416

Shintom

381

Kenwood

375,376,378,392,394,400,416

Sony

409,410,411,412,413

Kodak

418

STS

389

Lloyd

382,420

Sylvania

382,385,386,387,398,403,420

Logik

381

Symphonic

382,420

LXI

418,430,431,432,433,434

Tandy

382

Curtis

Mathes

Kardon

20

Instruction

Manual

VCR CODES
Brand

Code Number

Brand

Code Number

Tashiko

382,418

Victor

376,400

Tatung

375,392,395

Videosonic

379

Teac

375,382,392,420

Video Concepts

376

Technics

390,403

Wards

372,373,379,380,381,382,384,388,389,403,415,

Teknika

382,403,418,420

Toshiba

380,383,384,387,398,405

XR-1000

420

Totevision

379,418

Yamaha

375,376,378,392,406

Vector

376,406

Zenith

412,413

Research

418,420,423

LD CODES
Brand

Code Number

Brand

Code Number

Magnavox

336

Pioneer

342

Panasonic

340,341

Sony

337,338,339

CD CODES
Brand

Code Number

Brand

Brand

ADC

317

Luxman

332

ADO

318

Maran_

308,333

Aiwa

300,319

MCS

334

Akai

320

Mitsubishi

335

Denon

322

NEC

307

Dynatech

301

Onkyo

309

Emerson

302

Panasonic

310

Fisher

303,325,326

Pioneer

311

GE

327

RCA

312,324

Hitachi

3O4

Seam

321

Inkel

328

Sony

313,323

JVC

305,329

Technics

314

Kenwood

306,330,331

Yamaha

315,316

Code Number

CABLE BOX CODES

Brand

Code Number

Brand

Code Number

ABC

508,509,510,511

Philips

514

ChangHong

5OO

Pioneer

503,504,517

General

525

RCA

hamiln

541,542,54+5,546,547

Scientific

Hytex

5O8

StarCom

511

JerroId

506,510,511,512,513,520,525,548,549,550

Tocom

509,512

Movie Time

515

TV86

515

NSC

515

United Artists

508

Oak

501,508,516

Viewstar

514,515

Panasonic

502,507,544

Zenith

504,521,522,523

Instrument

SATELLITE

524
Atlantic

504,505,518,519

CODES

Brand

Code Number

Brand

Code Number

GE

528,531,532

Panasonic

543

526

Philips

536

Hitachi

534,535

Pmscan

528,531,532

Hughes

537,538

RCA

528,531,532,540

JVC

533

Sony

529,539

Magnavox

536

Toshiba

527,530

Genernal

Electric

AMPLIFIER

CODES

Brand

Code Number

Brand

Code Number

Brand

Code Number

Aiwa

702

Memorex

704

Sony

702,705

ChangHong

700,701

Panasonic

710

Techniques

710

Carver

709

Pioneer

703,704

Toshiba

711

Fisher

709

Proton

7O8

Victor

706

JVC

706,712

Quasar

710

Magnavox

708

RCA

707,713

21

Instruction Manual
TROUBLESHOOTING

GUIDE

Check the following guide for a possible correction to a problem before contacting customer service.
Check FAQ at our website: www.apexdigitalinc.com.

Symptoms

Correction

No power

- Verify the power cable to plug into an outlet with power.

No picture

Verify the connection from the DVDNCR video output to the TV video input is secure.
Then switch TV to the appropriate Video mode.
Verify an antenna cable is securely connected to the RF in jack.

No sound

Connect the audio cables into the terminals securely.

Verify the connection from the DVD/VCR audio output to the TV audio input. Then
switch to the appropriate mode on the receiver. Refer to your audio amplifier owner's
manual.
Verify the volume is at an appropriate level and the mute feature is not on.
Make sure MTS feature is properly set.

No TV signal

Verify the TV is set to Antenna mode.

Make sure the antenna is securely connected to the RF in jack.
Unplug the TV from the wall for 30 seconds, then plug in and try again.
Unplug the antenna connection from the back of the TV, unplug the TV from the wall,
wait 30 seconds, then try again.

Stripe or purple interference appears in the

screen.

Verify the speakers around the TV set are shielded.

Picture becomes
snowy.

Verify the antenna lead wire is in working condition.

- Verify the antenna is connected securely to the RF in jack.

Picture with multi-image

Move the antenna around to minimize multi-images.

- The video frequency radiated from TV station can be reflected by tall buildings, high
tower, etc.

TV channel not received

Make sure the Air/Cable setting is correct.

- Channel may be locked with the block channel feature, such as Parental Control.
Check Add/Erase feature, as channel may have been erased during set up.

Black box appears on

screen.

Verify Closed Caption feature is off.

Remote control
doesn't operate.

- Batteries may be weak. Replace batteries.

Make sure nothing is located between the remote and the remote sensor.

No stereo or foreign
language received.

- Verify MTS feature is properly set.

22

Instruction

Manual

]
LIMITED UNITED STATES WARRANTY
(PF2020/PF2030/PF2720/PF2730/PF3220/PF3230)

Apex

Digital,

receiving

Inc. makes

this product

the following

limited

as a gift from the original

warranties.
consumer

These

limited

purchaser

warranties

extend

to the original consumer

and to no other purchaser

purchaser

or any person

or transferee.

Limited Ninety (90) Days Warranty

Apex Digital,
original

Inc. warrants this product

retail

refurbished
Center's

purchase.

During

part or product,

without

repair facility. When

an Authorized

Apex Digital,

27" and 32" televisions,

this

and its parts against

period

Apex

charge

repaired,

defects

Center.

Apex

in material

Inc. will repair

to you. Depending

it will be returned

Inc. Service

an authorized

Digital,

on the service

for a period

a defective

required

it will either

Inc. Service

for all transportation

Center

personnel

charges

will come

of ninety

part or product
be performed

to your home at no cost to you. For 20" television,

You are responsible

Digital,

or workmanship

or replace

(90) days after the date of

at their

option,

with

a new or

in your home or at the Service

you must deliver the entire product

for the set to and from the Service

to your home when warranty

service

Center.

to
For

is required.

Limited One (1) Year Warranty

Apex Digital,

Inc. further

original

retail purchase

replace

a defective

the

date

warrants

the parts in this product

with exception

of the remote

part with a new or refurbished

of original

retail

purchase,

transportation

and insurance

Apex Digital,

Inc. Authorized

charges
Service

you

against

control

part without

are responsible

defects

which

in material

is guaranteed

or workmanship
for ninety

charge to you, except

to pay

all labor

that if a defective

charges

for the set to and from the Service Center.

for a period of one (1) year after the date of

(90) days.

During

involved in the part(s)

For 20" television,

this period

part is replaced

Apex

Digital,

Inc. will

after ninety (90) days from

replacement

including all

you must also deliver

packing,

the entire product to an

Center.

Limited Two (2) Years Warranty

Apex Digital, Inc. further warrants the picture tube in this product against defects in materials or workmanship
for a period of two (2) years after the
date of original retail purchase. During this period Apex Digital, Inc. will replace the defective picture tube at their option with a new or rebuilt
picture tube or at their option replace
or product

is replaced

the entire product

with a new or refurbished

after one (1) year from the date of the original

product at no charge to you; if however

retail purchase,

you pay all labor, packing

the defective

and transportation

picture tube

charges

involved

of antenna

or cable

in the replacement.

Rental Product
The warranty

for a rental product begins with the original date of receipt by the rental firm.

YourResponsibility
The above warranties are subject to the following
You must retain your bill of sale to provide

conditions:
proof of purchase.

For 20" television,

you must retain all packing

All warranty

of this product

service

These

warranties

Labor

service

systems

are effective

charges

materials

only if the product is purchased

for set installation, setup,

are not covered

for return shipment.

must be made by an Authorized

by this warranty.

adjustment

Reception

Apex

Digital, Inc. Service

and operated
of customer

problems

caused

Center.

in the U.S.A.
controls

and installation

by inadequate

antenna

or repair of any type

or cable system are your responsibility.

Warranties extend only to defects in materials or workmanship

as limited above and do not extend to any product or parts which have
been lost or discarded by you or damage to product or parts caused by misuse, accident, damage caused by Acts of God, such as
lightning

or fluctuations

by us; or to product
not cover cosmetic

in electrical

which

power, improper

has been modified

damages

installation,

or had the serial

improper

number

maintenance

removed,

or use in violation

altered,

defaced

of instructions

or rendered

illegible.

furnished

Warranties

do

or lost accessories.

How to Obtain Warranty Service

If after following

all the operating instructions in this manual

and reading

the TROUBLESHOOTING

section

you find that service

1. Contact our Customer Service Center directly call 866-4-APEX-INC-(866-427-3946),

Mon - Fri 8:30am - 5:00pm (California).
2. After obtaining the requested information, you must present your receipt to the Authorized
Service Center to obtain warranty
3. For 20" television,

you must deliver the entire product

to and from the Service

when

warranty

authorized

service

Center.

For 27" and 32" televisions,

is required.

Apex Digital,

to the Authorized

Depending

Inc. Service Center'

an authorized

on the service
s repair facility

Service Center.

required,

You are responsible

Apex Digital,

Inc. Service

it will either be performed

for repair and then returned

service.

for all transportation

Center

in your

is necessary:

personnel

for the product

will come to your home

home or the set will be taken

to the

to your home at no cost to you, while under the Limited

Ninety (90) Days Warranty.

Limitations
All warranties
implied by state law, including the implied warranties of merchantability
and fitness for a particular purpose, are expressly limited to
the duration of the limited warranties as set forth above. With the exception of any warranties
implied by state law as hereby limited, the foregoing
warranty

is exclusive

and in lieu of all other warranties,

the repair or replacement

guarantees,

No person,

agent,

whatsoever.

The time within which action must be commenced

any stature,
discovered

distributor,

or law of the United

gives you specific

on how long an implied

the above

dealer

provisions

warranty

or company

is authorized

States or any state thereof,

the defect. This limitation

This warranty

agreements

of any parts. In no event shall Apex Digital,

and similar

obligations

Inc. be liable for consequential

to change,

to enforce
is hereby

does not apply to implied warranties

modify

limited
arising

rights and you may also have these rights which

lasts, when an action may be brought,

or extend

any obligation
to ninety

23

or seller with respect

to

Digital,
days

of these

Inc. arising

warranties

in any

under this warranty

from the date you discover

manner
or under

or should

have

under state law.

may vary from state to state. Some states do not allow limitation

or the exclusion

may not apply to you.

the terms

of Apex
(90)

of manufacturers

or incidental damages.

or limitation

of incidental

or consequential

damages,

so

APEX Digital, Inc.

Ontario, CA 91761
FOR SERVICE CALL: 866-4-APEX-INC
http://www.apexdigitalinc.com