Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    C402 Rev A - ASTM A182 F304: All Mechanical Tests To Be Carried Out To ASTM A370 After Final Heat Treatment

    Uploaded by

    Rajkumar
    This material specification outlines the requirements for raw materials used to manufacture clamp components from Vector International. The specification covers ASTM A182 grade F304 stainless steel die forgings and ring forgings. Key requirements include a chemical composition of 18-20% chromium, 8-11% nickel, and a solution heat treatment at a minimum of 1040°C followed by quenching. Mechanical properties, non-destructive testing, heat treatment certification, and identification marking are also defined. Any deviations from the specification must be approved through a concession request.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C402 Rev A - ASTM A182 F304: All Mechanical Tests To Be Carried Out To ASTM A370 After Final Heat Treatment

    Uploaded by

    Rajkumar
    28 views2 pages
    This material specification outlines the requirements for raw materials used to manufacture clamp components from Vector International. The specification covers ASTM A182 grade F304 stainless steel die forgings and ring forgings. Key requirements include a chemical composition of 18-20% chromium, 8-11% nickel, and a solution heat treatment at a minimum of 1040°C followed by quenching. Mechanical properties, non-destructive testing, heat treatment certification, and identification marking are also defined. Any deviations from the specification must be approved through a concession request.

    Original Title

    a 312.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This material specification outlines the requirements for raw materials used to manufacture clamp components from Vector International. The specification covers ASTM A182 grade F304 stainless steel die forgings and ring forgings. Key requirements include a chemical composition of 18-20% chromium, 8-11% nickel, and a solution heat treatment at a minimum of 1040°C followed by quenching. Mechanical properties, non-destructive testing, heat treatment certification, and identification marking are also defined. Any deviations from the specification must be approved through a concession request.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    C402 Rev A - ASTM A182 F304: All Mechanical Tests To Be Carried Out To ASTM A370 After Final Heat Treatment

    Uploaded by

    Rajkumar
    This material specification outlines the requirements for raw materials used to manufacture clamp components from Vector International. The specification covers ASTM A182 grade F304 stainless steel die forgings and ring forgings. Key requirements include a chemical composition of 18-20% chromium, 8-11% nickel, and a solution heat treatment at a minimum of 1040°C followed by quenching. Mechanical properties, non-destructive testing, heat treatment certification, and identification marking are also defined. Any deviations from the specification must be approved through a concession request.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MATERIALSPECIFICATION

    C402RevAASTMA182F304
    Rev

    A
    O

    Date

    29.05.90

    ECN

    Issue

    Revised/Reissued
    OriginalIssue

    Preparedby

    Check/Approved

    ProductForm
    Standard
    Grade
    AcceptableClass
    DieForgedClamp
    ASTMA182
    F304

    RingForgings

    Scope
    Thisspecificationoutlinesthemodificationsandadditionalrequirementstothe
    relevantASTMSpecificationsforthesupplyofrawmaterialtomanufactureVector
    Internationalclampcomponents.
    Other
    ASTMA370(LatestIssue)
    Applicable
    ASTMA388(LatestIssue)
    Specifications
    HeatTreatment SolutionTreat(1040Cmin)andQuench
    Chemical

    Min
    Max

    Min
    Max

    Min
    Max
    Analysis%
    C
    Cr
    18.00
    20.00

    0.08 P

    0.04
    (Heat)
    Si

    1.00 S

    0.03
    Mn

    2.00 Ni
    8.00
    11.00
    Mechanical

    Min
    Max
    Properties
    Tensile(Rm):
    75000psi(517MPa)

    Yield(Rp0.2):
    30000psi(207MPa)

    Elongation(A%):
    30

    R.ofA(Z%):
    50

    Hardness:

    Note:AllmechanicalteststobecarriedouttoASTMA370afterfinalheattreatment.
    TestSampling Testcouponsmustrepresentproductionforgings(ringandopendie)andshould
    beheattreatedwiththeforgings.Testcouponandforgingstobestackedinthe
    furnaceinaccordancewithgoodpracticetoensureevenheattreatment.Thetest
    couponsreceiveessentiallythesameforgingreductionratioastheproduction
    forgings.
    Testcouponsmustbetakenfromtheproductionforgingwhencloseddieforgings
    areused.
    N.D.E.
    100%VisualinspectionondieforgingstoASTMA350(LatestIssue).
    100%UTonforgingbilletinaccordancewithASTMA388(LatestIssue).
    100%LPIonfinisheddieforgingsinaccordancewithASMEV.AcceptancetoASME
    VIII.

    MATERIALSPECIFICATION

    C402RevAASTMA182F304
    SurfaceFinish
    andQuality
    Repairof
    Defects
    Marking
    Certification

    Notes

    100%UTonringforgingsinaccordancewithASTMA388(LatestIssue).
    RingforgingstobeofsufficientqualityforLPIcheck.LPIonfinishedmachined
    partstobeundertakenbyVectorInternationalLtd.
    Forgingsshallbesuppliedfreeofdefects(Slaginclusions,scale,laps,cracks).
    Weldrepairisnotacceptable.
    ForgingstobemarkedwithHeatNumber,MaterialGrade,andVector
    Specification.
    CertificationinaccordancewithEN102043.1:ChemicalAnalysis,Mechanical
    Analysis,HeatTreatmentReport/Graphs,MillCertificate(WetStamped).
    Certificationmustbetraceabletoeachheattreatlot.
    1. RefertoPOforsupplementaldetails.
    2. Anydeviationfromthisspecificationmustberaisedformallyasaconcession
    requestpriortodelivery.Certificationmustincludeconcessiondocumentation.

    You might also like