Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
136 views

Lecture 1 Introduction

This document provides an introduction to vibration, including definitions, components, and analysis procedures. It defines vibration as any motion that repeats itself over time, such as a pendulum or plucked string. The basic components of a vibrating system are a spring or elasticity to store potential energy, a mass or inertia to store kinetic energy, and a damper to dissipate energy. Vibration analysis involves deriving governing equations from a system's model, solving the equations to determine the response, and interpreting the results. Terminology introduced includes cycle, amplitude, period, frequency, phase angle, and natural frequency.

Uploaded by

Khairin Ezzaty
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
136 views

Lecture 1 Introduction

This document provides an introduction to vibration, including definitions, components, and analysis procedures. It defines vibration as any motion that repeats itself over time, such as a pendulum or plucked string. The basic components of a vibrating system are a spring or elasticity to store potential energy, a mass or inertia to store kinetic energy, and a damper to dissipate energy. Vibration analysis involves deriving governing equations from a system's model, solving the equations to determine the response, and interpreting the results. Terminology introduced includes cycle, amplitude, period, frequency, phase angle, and natural frequency.

Uploaded by

Khairin Ezzaty
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 25

MBB4023 Vibration

Semester May 2011


Lecture 1
What is vibration?
Vibration = Any motion that repeats itself after an
interval of time is called vibration or oscillation.

For example:
1.The swinging of a pendulum.
2.The motion of a plucked string.

The study of vibration deals with the


◦ study of oscillatory motions of bodies and the
forces associated with them.
Basic component of vibration

Vibratory System consists of:


1) spring or elasticity - a means for storing potential energy
2) mass or inertia - a means for storing kinetic energy
3) Damper - a means by which the energy is gradually lost

Involves transfer of potential energy to kinetic


energy and kinetic energy to potential energy alternately.

Note: If the systems is damped, some energy is dissipated in


each cycle of vibration which eventually all of it will disappear.
Basic concept of vibration

At point 1: KE = 0
PE = mgl(1 – cos θ)

At point 2: PE = 0
KE = Max

At point 3: KE = 0
PE = PE @ 1
Classification of Vibration

1. Free Vibration:

A system is left to vibrate on its own after an initial disturbance and


no external force acts on the system. E.g. simple pendulum

2. Forced Vibration:
A system that is subjected to a repeating external force. E.g.
oscillation arises from diesel engines

- Resonance occurs when the frequency of the


external force coincides with one of the natural
frequencies of the system
Classification of Vibration
1. Undamped Vibration:
When no energy is lost or dissipated in friction or other resistance
during oscillations

2. Damped Vibration:
When any energy is lost or dissipated in friction or other resistance
during oscillations

3. Linear Vibration:
When all basic components of a vibratory system, i.e. the spring, the
mass and the damper behave linearly
Classification of Vibration
• Nonlinear Vibration:
If any of the components behave nonlinearly. Most vibration
systems behave nonlinearly with increasing amplitude.

• Deterministic Vibration:
If the value or magnitude of the excitation (force or motion)
acting on a vibratory system is known at any given time

• Nondeterministic or random Vibration:


When the value of the excitation at a given time cannot be
predicted. The response is also random and can be described
only in terms of statistical quantities.
Vibration Analysis Procedure

Step 1: Mathematical Modeling

Transform the physical system to model using gradual


refinement method.

Represent all important vibration components of the


system for the purpose of deriving the mathematical
equations governing the behavior of the system.
Vibration Analysis Procedure
Step 2: Derivation of Governing Equations

Using the principles of dynamics and free body diagram, derive the
equations that describe the vibration of the system.

Equations are in the form of Ordinary Differential Equation (ODE) for the
discrete system and Partial Differential Equation (PDE) for a
continuous systems.

Methods:
1. Newton’s 2nd Law of Motion
2. D’Alembert’s Principle
3. Energy method.
Vibration Analysis Procedure

Step 3: Solution of the Governing Equations

• Purpose - To determine the response of the vibrating system in


terms of vibration amplitude, frequency, phase angle, speed,
acceleration etc.

• Methods used:
Standard methods of solving differential equations.
Laplace tranform.
Matrices.
Numerical method.
Vibration Analysis Procedure

Step 4: Interpretation of the Results

The solution provides the data required for vibration


interpretation. If analysis is done during the design stage, the
vibration analysis result may cause some design change.
Definition and Terminology
 Cycle - The movement of a vibrating body from its equilibrium
position to its extreme position in one direction back to its equilibrium
position and then to its extreme position in other direction and back to its
equilibrium position.

 Amplitude - The maximum displacement of a vibrating body from its


equilibrium position. The unit is mm.

 Period, τ - Time taken to complete one cycle of motion. Unit is sec.


Definition and Terminology
 Frequency, f - The number of cycle per unit time, Hz. It is
also a reciprocal of period.

 Phase Angle, φ - Angle between two oscillation, rad.

 Natural frequency - Frequency with which the physical system


oscillate after initial disturbance without external force applied,
ωn and the unit is rad/sec.
Definition and Terminology

 Degree of Freedom

Minimum number of independent coordinates required to determine


the positions of all parts of a system at any instant of time.
Examples of single degree-of-freedom systems:

You might also like